ReP USP - Resultado da busca

Artigo de periodico
Topology optimisation of steel connections under compression assisted by physical and geometrical nonlinear fnite element analysis and its application to an industrial case study (2024)
Ribeiro, Tiago; Bernardo, Luis; Carrazedo, Ricardo ; De Domenico, Dario
Fonte: Structural and Multidisciplinary Optimization. Unidade: EESC
Assuntos: CONSTRUÇÃO CIVIL, TOPOLOGIA, ESTRUTURAS, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Tiago et al. Topology optimisation of steel connections under compression assisted by physical and geometrical nonlinear fnite element analysis and its application to an industrial case study. Structural and Multidisciplinary Optimization, v. 67, n. 6, p. 1-34, 2024Tradução . . Disponível em: https://dx.doi.org/10.1007/s00158-024-03799-7. Acesso em: 25 set. 2024.
APA
Ribeiro, T., Bernardo, L., Carrazedo, R., & De Domenico, D. (2024). Topology optimisation of steel connections under compression assisted by physical and geometrical nonlinear fnite element analysis and its application to an industrial case study. Structural and Multidisciplinary Optimization, 67( 6), 1-34. doi:10.1007/s00158-024-03799-7
NLM
Ribeiro T, Bernardo L, Carrazedo R, De Domenico D. Topology optimisation of steel connections under compression assisted by physical and geometrical nonlinear fnite element analysis and its application to an industrial case study [Internet]. Structural and Multidisciplinary Optimization. 2024 ; 67( 6): 1-34.[citado 2024 set. 25 ] Available from: https://dx.doi.org/10.1007/s00158-024-03799-7
Vancouver
Ribeiro T, Bernardo L, Carrazedo R, De Domenico D. Topology optimisation of steel connections under compression assisted by physical and geometrical nonlinear fnite element analysis and its application to an industrial case study [Internet]. Structural and Multidisciplinary Optimization. 2024 ; 67( 6): 1-34.[citado 2024 set. 25 ] Available from: https://dx.doi.org/10.1007/s00158-024-03799-7
Artigo de periodico
Dispatchable microgrids: an extended provision of systemic ancillary services to low-voltage distribution grids (2024)
Alonso, Augusto Matheus dos Santos ; Marafão, Fernando Pinhabel; Tedeschi, Elisabetta
Fonte: IEEE Access. Unidade: EESC
Assuntos: DEMANDA ENERGÉTICA, ENERGIA ELÉTRICA, DISTRIBUIÇÃO DE ENERGIA ELÉTRICA, ENGENHARIA ELÉTRICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALONSO, Augusto Matheus dos Santos e MARAFÃO, Fernando Pinhabel e TEDESCHI, Elisabetta. Dispatchable microgrids: an extended provision of systemic ancillary services to low-voltage distribution grids. IEEE Access, v. 11, p. 1-15, 2024Tradução . . Disponível em: http://dx.doi.org/10.1109/ACCESS.2024.3406899,. Acesso em: 25 set. 2024.
APA
Alonso, A. M. dos S., Marafão, F. P., & Tedeschi, E. (2024). Dispatchable microgrids: an extended provision of systemic ancillary services to low-voltage distribution grids. IEEE Access, 11, 1-15. doi:10.1109/ACCESS.2024.3406899
NLM
Alonso AM dos S, Marafão FP, Tedeschi E. Dispatchable microgrids: an extended provision of systemic ancillary services to low-voltage distribution grids [Internet]. IEEE Access. 2024 ; 11 1-15.[citado 2024 set. 25 ] Available from: http://dx.doi.org/10.1109/ACCESS.2024.3406899,
Vancouver
Alonso AM dos S, Marafão FP, Tedeschi E. Dispatchable microgrids: an extended provision of systemic ancillary services to low-voltage distribution grids [Internet]. IEEE Access. 2024 ; 11 1-15.[citado 2024 set. 25 ] Available from: http://dx.doi.org/10.1109/ACCESS.2024.3406899,
Artigo de periodico
Visual localization and mapping in dynamic and changing environments (2023)
Soares, Joao Carlos Virgolino; Medeiros, Vivian Suzano; Abati, Gabriel Fischer; Becker, Marcelo ; Caurin, Glauco Augusto de Paula ; Gattass, Marcelo; Meggiolaro, Marco Antonio
Fonte: Journal of Intelligent and Robotic Systems. Unidade: EESC
Assuntos: ROBÔS, VEÍCULOS AUTÔNOMOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOARES, Joao Carlos Virgolino et al. Visual localization and mapping in dynamic and changing environments. Journal of Intelligent and Robotic Systems, v. 109, n. 4, p. 1-20, 2023Tradução . . Disponível em: http://dx.doi.org/10.1007/s10846-023-02019-6. Acesso em: 25 set. 2024.
APA
Soares, J. C. V., Medeiros, V. S., Abati, G. F., Becker, M., Caurin, G. A. de P., Gattass, M., & Meggiolaro, M. A. (2023). Visual localization and mapping in dynamic and changing environments. Journal of Intelligent and Robotic Systems, 109( 4), 1-20. doi:10.1007/s10846-023-02019-6
NLM
Soares JCV, Medeiros VS, Abati GF, Becker M, Caurin GA de P, Gattass M, Meggiolaro MA. Visual localization and mapping in dynamic and changing environments [Internet]. Journal of Intelligent and Robotic Systems. 2023 ; 109( 4): 1-20.[citado 2024 set. 25 ] Available from: http://dx.doi.org/10.1007/s10846-023-02019-6
Vancouver
Soares JCV, Medeiros VS, Abati GF, Becker M, Caurin GA de P, Gattass M, Meggiolaro MA. Visual localization and mapping in dynamic and changing environments [Internet]. Journal of Intelligent and Robotic Systems. 2023 ; 109( 4): 1-20.[citado 2024 set. 25 ] Available from: http://dx.doi.org/10.1007/s10846-023-02019-6
Artigo de periodico
Machine condition monitoring in FDM based on electret microphone, SVM, and neural networks (2023)
Lopes, Thiago Glissoi; Aguiar, Paulo Roberto; Monson, Paulo Monteiro de Carvalho; D'Addona, Doriana Marilena; Conceição Junior, Pedro de Oliveira; Oliveira Junior, Reinaldo Götz de
Fonte: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Assuntos: IMPRESSÃO 3-D, REDES NEURAIS, PROCESSAMENTO DE SINAIS, ENGENHARIA ELÉTRICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LOPES, Thiago Glissoi et al. Machine condition monitoring in FDM based on electret microphone, SVM, and neural networks. International Journal of Advanced Manufacturing Technology, v. 129, n. 3-4, p. 1769-1786, 2023Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-023-12375-0. Acesso em: 25 set. 2024.
APA
Lopes, T. G., Aguiar, P. R., Monson, P. M. de C., D'Addona, D. M., Conceição Junior, P. de O., & Oliveira Junior, R. G. de. (2023). Machine condition monitoring in FDM based on electret microphone, SVM, and neural networks. International Journal of Advanced Manufacturing Technology, 129( 3-4), 1769-1786. doi:10.1007/s00170-023-12375-0
NLM
Lopes TG, Aguiar PR, Monson PM de C, D'Addona DM, Conceição Junior P de O, Oliveira Junior RG de. Machine condition monitoring in FDM based on electret microphone, SVM, and neural networks [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 129( 3-4): 1769-1786.[citado 2024 set. 25 ] Available from: http://dx.doi.org/10.1007/s00170-023-12375-0
Vancouver
Lopes TG, Aguiar PR, Monson PM de C, D'Addona DM, Conceição Junior P de O, Oliveira Junior RG de. Machine condition monitoring in FDM based on electret microphone, SVM, and neural networks [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 129( 3-4): 1769-1786.[citado 2024 set. 25 ] Available from: http://dx.doi.org/10.1007/s00170-023-12375-0
Artigo de periodico
Additive manufacturing of calcium carbonate parts through vat-photopolymerization and sintering in carbon dioxide atmosphere (2023)
Morais, Mateus Mota ; Camargo, Italo Leite de ; Colombo, Paolo; Fortulan, Carlos Alberto
Fonte: Open Ceramics. Unidade: EESC
Assuntos: MANUFATURA ADITIVA, SINTERIZAÇÃO, IMPRESSÃO 3-D, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORAIS, Mateus Mota et al. Additive manufacturing of calcium carbonate parts through vat-photopolymerization and sintering in carbon dioxide atmosphere. Open Ceramics, v. 14, p. 1-12, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.oceram.2023.100348. Acesso em: 25 set. 2024.
APA
Morais, M. M., Camargo, I. L. de, Colombo, P., & Fortulan, C. A. (2023). Additive manufacturing of calcium carbonate parts through vat-photopolymerization and sintering in carbon dioxide atmosphere. Open Ceramics, 14, 1-12. doi:10.1016/j.oceram.2023.100348
NLM
Morais MM, Camargo IL de, Colombo P, Fortulan CA. Additive manufacturing of calcium carbonate parts through vat-photopolymerization and sintering in carbon dioxide atmosphere [Internet]. Open Ceramics. 2023 ; 14 1-12.[citado 2024 set. 25 ] Available from: https://doi.org/10.1016/j.oceram.2023.100348
Vancouver
Morais MM, Camargo IL de, Colombo P, Fortulan CA. Additive manufacturing of calcium carbonate parts through vat-photopolymerization and sintering in carbon dioxide atmosphere [Internet]. Open Ceramics. 2023 ; 14 1-12.[citado 2024 set. 25 ] Available from: https://doi.org/10.1016/j.oceram.2023.100348
Artigo de periodico
Kinematic and dynamic data from a robotic assembly of aeronautical threaded fasteners (2023)
Lahr, Gustavo José Giardini; Silva, Thiago Henrique Segreto; Moreira, Guilherme Ribeiro; Boaventura, Thiago; Caurin, Glauco Augusto de Paula ; Ajoudani, Arash
Fonte: Data in Brief. Unidade: EESC
Assuntos: CINEMÁTICA, ROBÓTICA, ANÁLISE DE SÉRIES TEMPORAIS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LAHR, Gustavo José Giardini et al. Kinematic and dynamic data from a robotic assembly of aeronautical threaded fasteners. Data in Brief, v. 51, p. 1-6, 2023Tradução . . Disponível em: https://dx.doi.org/10.1016/j.dib.2023.109674. Acesso em: 25 set. 2024.
APA
Lahr, G. J. G., Silva, T. H. S., Moreira, G. R., Boaventura, T., Caurin, G. A. de P., & Ajoudani, A. (2023). Kinematic and dynamic data from a robotic assembly of aeronautical threaded fasteners. Data in Brief, 51, 1-6. doi:10.1016/j.dib.2023.109674
NLM
Lahr GJG, Silva THS, Moreira GR, Boaventura T, Caurin GA de P, Ajoudani A. Kinematic and dynamic data from a robotic assembly of aeronautical threaded fasteners [Internet]. Data in Brief. 2023 ; 51 1-6.[citado 2024 set. 25 ] Available from: https://dx.doi.org/10.1016/j.dib.2023.109674
Vancouver
Lahr GJG, Silva THS, Moreira GR, Boaventura T, Caurin GA de P, Ajoudani A. Kinematic and dynamic data from a robotic assembly of aeronautical threaded fasteners [Internet]. Data in Brief. 2023 ; 51 1-6.[citado 2024 set. 25 ] Available from: https://dx.doi.org/10.1016/j.dib.2023.109674
Trabalho de evento
Method for characterization of limit cycles in power systems (2023)
Sosa Rios, Manuel Leonardo; Alberto, Luís Fernando Costa ; Ramos, Rodrigo Andrade ; Bizzarri, Federico
Fonte: Proceedings. Nome do evento: IEEE Power & Energy Society General Meeting - PESGM. Unidade: EESC
Assuntos: SISTEMAS ELÉTRICOS DE POTÊNCIA, SISTEMAS NÃO LINEARES, ENGENHARIA ELÉTRICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOSA RIOS, Manuel Leonardo et al. Method for characterization of limit cycles in power systems. 2023, Anais.. Piscataway, NJ, USA: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2023. Disponível em: https://dx.doi.org/10.1109/PESGM52003.2023.10252359. Acesso em: 25 set. 2024.
APA
Sosa Rios, M. L., Alberto, L. F. C., Ramos, R. A., & Bizzarri, F. (2023). Method for characterization of limit cycles in power systems. In Proceedings. Piscataway, NJ, USA: Escola de Engenharia de São Carlos, Universidade de São Paulo. doi:10.1109/PESGM52003.2023.10252359
NLM
Sosa Rios ML, Alberto LFC, Ramos RA, Bizzarri F. Method for characterization of limit cycles in power systems [Internet]. Proceedings. 2023 ;[citado 2024 set. 25 ] Available from: https://dx.doi.org/10.1109/PESGM52003.2023.10252359
Vancouver
Sosa Rios ML, Alberto LFC, Ramos RA, Bizzarri F. Method for characterization of limit cycles in power systems [Internet]. Proceedings. 2023 ;[citado 2024 set. 25 ] Available from: https://dx.doi.org/10.1109/PESGM52003.2023.10252359
Artigo de periodico
Vision on metal additive manufacturing: developments, challenges and future trends (2023)
Bernard, Alain; Kruth, Jean-Pierre; Jian, Cao; Lanza, Gisela; Bruschi, Stefania; Merklein, Marion; Vaneker, Tom; Schmidt, Michael; Sutherland, John W.; Donmez, Alkan; Silva, Eraldo Jannone da
Fonte: CIRP Journal of Manufacturing Science and Technology. Unidade: EESC
Assuntos: MANUFATURA ADITIVA, IMPRESSÃO 3-D, INOVAÇÕES TECNOLÓGICAS, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BERNARD, Alain et al. Vision on metal additive manufacturing: developments, challenges and future trends. CIRP Journal of Manufacturing Science and Technology, v. 47, p. 18-58, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.cirpj.2023.08.005. Acesso em: 25 set. 2024.
APA
Bernard, A., Kruth, J. -P., Jian, C., Lanza, G., Bruschi, S., Merklein, M., et al. (2023). Vision on metal additive manufacturing: developments, challenges and future trends. CIRP Journal of Manufacturing Science and Technology, 47, 18-58. doi:10.1016/j.cirpj.2023.08.005
NLM
Bernard A, Kruth J-P, Jian C, Lanza G, Bruschi S, Merklein M, Vaneker T, Schmidt M, Sutherland JW, Donmez A, Silva EJ da. Vision on metal additive manufacturing: developments, challenges and future trends [Internet]. CIRP Journal of Manufacturing Science and Technology. 2023 ; 47 18-58.[citado 2024 set. 25 ] Available from: https://doi.org/10.1016/j.cirpj.2023.08.005
Vancouver
Bernard A, Kruth J-P, Jian C, Lanza G, Bruschi S, Merklein M, Vaneker T, Schmidt M, Sutherland JW, Donmez A, Silva EJ da. Vision on metal additive manufacturing: developments, challenges and future trends [Internet]. CIRP Journal of Manufacturing Science and Technology. 2023 ; 47 18-58.[citado 2024 set. 25 ] Available from: https://doi.org/10.1016/j.cirpj.2023.08.005
Trabalho de evento
Practical guidelines for ceramic vat photopolymerization developments (2023)
Camargo, Italo Leite de; Morais, Mateus Mota; Fortulan, Carlos Alberto
Fonte: Anais. Nome do evento: ABCM International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Assuntos: IMPRESSÃO 3-D, MANUFATURA ADITIVA, CERÂMICA, POLIMERIZAÇÃO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAMARGO, Italo Leite de e MORAIS, Mateus Mota e FORTULAN, Carlos Alberto. Practical guidelines for ceramic vat photopolymerization developments. 2023, Anais.. Rio de Janeiro, RJ: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2023. Disponível em: https://repositorio.usp.br/directbitstream/7de7a793-ef03-4a70-8a4d-cef2d106418b/41703_-_COBEM_ITALO_-_COB-2023-0061_-_Mateus_Mota_Morais_%281%29.pdf. Acesso em: 25 set. 2024.
APA
Camargo, I. L. de, Morais, M. M., & Fortulan, C. A. (2023). Practical guidelines for ceramic vat photopolymerization developments. In Anais. Rio de Janeiro, RJ: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/7de7a793-ef03-4a70-8a4d-cef2d106418b/41703_-_COBEM_ITALO_-_COB-2023-0061_-_Mateus_Mota_Morais_%281%29.pdf
NLM
Camargo IL de, Morais MM, Fortulan CA. Practical guidelines for ceramic vat photopolymerization developments [Internet]. Anais. 2023 ;[citado 2024 set. 25 ] Available from: https://repositorio.usp.br/directbitstream/7de7a793-ef03-4a70-8a4d-cef2d106418b/41703_-_COBEM_ITALO_-_COB-2023-0061_-_Mateus_Mota_Morais_%281%29.pdf
Vancouver
Camargo IL de, Morais MM, Fortulan CA. Practical guidelines for ceramic vat photopolymerization developments [Internet]. Anais. 2023 ;[citado 2024 set. 25 ] Available from: https://repositorio.usp.br/directbitstream/7de7a793-ef03-4a70-8a4d-cef2d106418b/41703_-_COBEM_ITALO_-_COB-2023-0061_-_Mateus_Mota_Morais_%281%29.pdf
Artigo de periodico
Seismic design of bolted connections in steel structures: a critical assessment of practice and research (2022)
Ribeiro, Tiago; Bernardo, Luis; Carrazedo, Ricardo ; De Domenico, Dario
Fonte: Structures. Unidade: EESC
Assuntos: ESTRUTURAS, SISMOLOGIA, AÇO, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Tiago et al. Seismic design of bolted connections in steel structures: a critical assessment of practice and research. Structures, v. 12, p. 1-44, 2022Tradução . . Disponível em: http://dx.doi.org/10.3390/buildings12010032. Acesso em: 25 set. 2024.
APA
Ribeiro, T., Bernardo, L., Carrazedo, R., & De Domenico, D. (2022). Seismic design of bolted connections in steel structures: a critical assessment of practice and research. Structures, 12, 1-44. doi:10.3390/buildings12010032
NLM
Ribeiro T, Bernardo L, Carrazedo R, De Domenico D. Seismic design of bolted connections in steel structures: a critical assessment of practice and research [Internet]. Structures. 2022 ; 12 1-44.[citado 2024 set. 25 ] Available from: http://dx.doi.org/10.3390/buildings12010032
Vancouver
Ribeiro T, Bernardo L, Carrazedo R, De Domenico D. Seismic design of bolted connections in steel structures: a critical assessment of practice and research [Internet]. Structures. 2022 ; 12 1-44.[citado 2024 set. 25 ] Available from: http://dx.doi.org/10.3390/buildings12010032
Artigo de periodico
The challenge of unprecedented floods and droughts in risk management (2022)
Kreibich, Heidi; Van Loon, Anne F.; Schröter, Kai; Vard, Philip J.; Mazzoleni, Maurizio ; Sairam, Nivedita; Abeshu, Guta Wakbulcho; Agafonovo, Svetlana; Aghakouchak, Amir; Aksoy, Hafzullah; Alvarez Garreton, Camila; Aznar, Blanca; Balkhi, Laila; Barendrecht, Marlies H.; Biancamaria, Sylvain; Bos Burgering, Liduin; Bradley, Chris; Budiyono, Yus; Buytaert, Wouter; Capewell, Lucinda; Carlson, Hayley; Cavus, Yonca; Couasnon, Anaïs; Coxon, Gemma; Daliakopoulos, Ioannis; Ruiter, Marleen C. de; Delus, Claire; Erfurt, Mathilde; Esposito, Giuseppe; François, Didier; Frappart, Frédéric; Freer, Jim; Frolova, Natalia; Gain, Animesh K.; Grillakis, Manolis; Grima, Jordi Oriol; Guzmán, Diego A.; Huning, Laurie S.; Ionita, Monica; Kharlamov, Maxim; Khoi, Dao Nguyen; Kieboom, Natalie; Kireeva, Maria; Koutroulis, Aristeidis; Casimiro, Waldo Lavado; Hong, Yi Li; Llasat, Maria Carmen; Macdonald, David; Mard, Johanna; Richards, Hannah Mathews; McKenzie, Andrew; Mejia, Alfonso; Mendiondo, Eduardo Mario ; Mens, Marjolein; Mobini, Shifteh; Mohor, Guilherme Samprogna; Nagavciuc, Viorica; Duc, Thanh Ngo; Huynh, Thi Thao Nguyen; Nhi, Pham Thi Thao; Petrucci, Olga; Nguyen, Hong Quan; Segui, Pere Quintana; Razavi, Saman; Ridolfi, Elena; Riegel, Jannik; Sadik, Md Shibly; Savelli, Elisa; Sazonov, Alexey; Sharma, Sanjib; Sörensen, Johanna; Souza, Felipe Augusto Arguello de ; Stahl, Kerstin; Steinhausen, Max; Stoelzle, Michael; Szalinska, Wiwiana; Qiuhong, Tang; Fuqiang, Tian; Tokarczyk, Tamara; Tovar, Carolina; Tran, Thi Van Thu; Van Huijgevoort, Marjolein H. J.; Van Vliet, Michelle T. H.; Vorogushyn, Sergiy; Wagener, Thorsten; Yueling, Wang; Wendt, Doris E.; Wickham, Elliot; Long, Yang; Bigiarini, Mauricio Zambrano; Blöschl, Günter; Di Baldassarre, Giuliano
Fonte: Nature. Unidade: EESC
Assuntos: RISCO, INUNDAÇÕES, ENGENHARIA HIDRÁULICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
KREIBICH, Heidi et al. The challenge of unprecedented floods and droughts in risk management. Nature, v. 608, n. 7921, p. 80-86, 2022Tradução . . Disponível em: https://doi.org/10.1038/s41586-022-04917-5. Acesso em: 25 set. 2024.
APA
Kreibich, H., Van Loon, A. F., Schröter, K., Vard, P. J., Mazzoleni, M., Sairam, N., et al. (2022). The challenge of unprecedented floods and droughts in risk management. Nature, 608( 7921), 80-86. doi:10.1038/s41586-022-04917-5
NLM
Kreibich H, Van Loon AF, Schröter K, Vard PJ, Mazzoleni M, Sairam N, Abeshu GW, Agafonovo S, Aghakouchak A, Aksoy H, Alvarez Garreton C, Aznar B, Balkhi L, Barendrecht MH, Biancamaria S, Bos Burgering L, Bradley C, Budiyono Y, Buytaert W, Capewell L, Carlson H, Cavus Y, Couasnon A, Coxon G, Daliakopoulos I, Ruiter MC de, Delus C, Erfurt M, Esposito G, François D, Frappart F, Freer J, Frolova N, Gain AK, Grillakis M, Grima JO, Guzmán DA, Huning LS, Ionita M, Kharlamov M, Khoi DN, Kieboom N, Kireeva M, Koutroulis A, Casimiro WL, Hong YL, Llasat MC, Macdonald D, Mard J, Richards HM, McKenzie A, Mejia A, Mendiondo EM, Mens M, Mobini S, Mohor GS, Nagavciuc V, Duc TN, Huynh TTN, Nhi PTT, Petrucci O, Nguyen HQ, Segui PQ, Razavi S, Ridolfi E, Riegel J, Sadik MS, Savelli E, Sazonov A, Sharma S, Sörensen J, Souza FAA de, Stahl K, Steinhausen M, Stoelzle M, Szalinska W, Qiuhong T, Fuqiang T, Tokarczyk T, Tovar C, Tran TVT, Van Huijgevoort MHJ, Van Vliet MTH, Vorogushyn S, Wagener T, Yueling W, Wendt DE, Wickham E, Long Y, Bigiarini MZ, Blöschl G, Di Baldassarre G. The challenge of unprecedented floods and droughts in risk management [Internet]. Nature. 2022 ; 608( 7921): 80-86.[citado 2024 set. 25 ] Available from: https://doi.org/10.1038/s41586-022-04917-5
Vancouver
Kreibich H, Van Loon AF, Schröter K, Vard PJ, Mazzoleni M, Sairam N, Abeshu GW, Agafonovo S, Aghakouchak A, Aksoy H, Alvarez Garreton C, Aznar B, Balkhi L, Barendrecht MH, Biancamaria S, Bos Burgering L, Bradley C, Budiyono Y, Buytaert W, Capewell L, Carlson H, Cavus Y, Couasnon A, Coxon G, Daliakopoulos I, Ruiter MC de, Delus C, Erfurt M, Esposito G, François D, Frappart F, Freer J, Frolova N, Gain AK, Grillakis M, Grima JO, Guzmán DA, Huning LS, Ionita M, Kharlamov M, Khoi DN, Kieboom N, Kireeva M, Koutroulis A, Casimiro WL, Hong YL, Llasat MC, Macdonald D, Mard J, Richards HM, McKenzie A, Mejia A, Mendiondo EM, Mens M, Mobini S, Mohor GS, Nagavciuc V, Duc TN, Huynh TTN, Nhi PTT, Petrucci O, Nguyen HQ, Segui PQ, Razavi S, Ridolfi E, Riegel J, Sadik MS, Savelli E, Sazonov A, Sharma S, Sörensen J, Souza FAA de, Stahl K, Steinhausen M, Stoelzle M, Szalinska W, Qiuhong T, Fuqiang T, Tokarczyk T, Tovar C, Tran TVT, Van Huijgevoort MHJ, Van Vliet MTH, Vorogushyn S, Wagener T, Yueling W, Wendt DE, Wickham E, Long Y, Bigiarini MZ, Blöschl G, Di Baldassarre G. The challenge of unprecedented floods and droughts in risk management [Internet]. Nature. 2022 ; 608( 7921): 80-86.[citado 2024 set. 25 ] Available from: https://doi.org/10.1038/s41586-022-04917-5
Artigo de periodico
Electromyography-based, robust hand motion classification employing temporal multi-channel vision transformers (2022)
Godoy, Ricardo Vilela de; Lahr, Gustavo José Giardini; Dwivedi, Anany; Reis, Tharik José Sorrino dos; Polegato, Paulo Henrique; Becker, Marcelo ; Caurin, Glauco Augusto de Paula ; Liarokapis, Minas
Fonte: IEEE Robotics and Automation Letters. Unidade: EESC
Assuntos: ELETROMIOGRAFIA, SISTEMA MUSCULOSQUELÉTICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GODOY, Ricardo Vilela de et al. Electromyography-based, robust hand motion classification employing temporal multi-channel vision transformers. IEEE Robotics and Automation Letters, v. 7, n. 4, p. 10200-10207, 2022Tradução . . Disponível em: https://doi.org/10.1109/LRA.2022.3192623. Acesso em: 25 set. 2024.
APA
Godoy, R. V. de, Lahr, G. J. G., Dwivedi, A., Reis, T. J. S. dos, Polegato, P. H., Becker, M., et al. (2022). Electromyography-based, robust hand motion classification employing temporal multi-channel vision transformers. IEEE Robotics and Automation Letters, 7( 4), 10200-10207. doi:10.1109/LRA.2022.3192623
NLM
Godoy RV de, Lahr GJG, Dwivedi A, Reis TJS dos, Polegato PH, Becker M, Caurin GA de P, Liarokapis M. Electromyography-based, robust hand motion classification employing temporal multi-channel vision transformers [Internet]. IEEE Robotics and Automation Letters. 2022 ; 7( 4): 10200-10207.[citado 2024 set. 25 ] Available from: https://doi.org/10.1109/LRA.2022.3192623
Vancouver
Godoy RV de, Lahr GJG, Dwivedi A, Reis TJS dos, Polegato PH, Becker M, Caurin GA de P, Liarokapis M. Electromyography-based, robust hand motion classification employing temporal multi-channel vision transformers [Internet]. IEEE Robotics and Automation Letters. 2022 ; 7( 4): 10200-10207.[citado 2024 set. 25 ] Available from: https://doi.org/10.1109/LRA.2022.3192623
Trabalho de evento
A hybrid model-based evolutionary optimization with passive boundaries for physical human-robot interaction (2022)
Lahr, Gustavo José Giardini; Garcia, Henrique Borges; Ajoudani, Arash; Boaventura, Thiago; Caurin, Glauco Augusto de Paula
Fonte: Proceedings. Nome do evento: IEEE International Conference on Robotics and Automation - ICRA 2022. Unidade: EESC
Assuntos: INTERAÇÃO HOMEM-MÁQUINA, ROBÓTICA, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LAHR, Gustavo José Giardini et al. A hybrid model-based evolutionary optimization with passive boundaries for physical human-robot interaction. 2022, Anais.. Piscataway, NJ, USA: IEEE, 2022. Disponível em: https://doi.org/10.1109/ICRA46639.2022.9811606. Acesso em: 25 set. 2024.
APA
Lahr, G. J. G., Garcia, H. B., Ajoudani, A., Boaventura, T., & Caurin, G. A. de P. (2022). A hybrid model-based evolutionary optimization with passive boundaries for physical human-robot interaction. In Proceedings. Piscataway, NJ, USA: IEEE. doi:10.1109/ICRA46639.2022.9811606
NLM
Lahr GJG, Garcia HB, Ajoudani A, Boaventura T, Caurin GA de P. A hybrid model-based evolutionary optimization with passive boundaries for physical human-robot interaction [Internet]. Proceedings. 2022 ;[citado 2024 set. 25 ] Available from: https://doi.org/10.1109/ICRA46639.2022.9811606
Vancouver
Lahr GJG, Garcia HB, Ajoudani A, Boaventura T, Caurin GA de P. A hybrid model-based evolutionary optimization with passive boundaries for physical human-robot interaction [Internet]. Proceedings. 2022 ;[citado 2024 set. 25 ] Available from: https://doi.org/10.1109/ICRA46639.2022.9811606
Parte de monografia/livro
Urban living labs and the water-energy-food nexus: experiences from the GLOCULL Project in São Paulo, Brazil (2022)
Moreira, Fabiano de Araújo ; Fontana, Michele Dalla; Bertolini, Ana Maria; Serpe, Patrícia Marra; Malheiros, Tadeu Fabrício ; Giulio, Gabriela Marques Di
Fonte: Water-energy-food nexus and climate change in cities. Unidades: EESC, FSP
Assuntos: ÁGUA, ENERGIA, ALIMENTAÇÃO, SUSTENTABILIDADE, SÃO PAULO (SP)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOREIRA, Fabiano de Araújo et al. Urban living labs and the water-energy-food nexus: experiences from the GLOCULL Project in São Paulo, Brazil. Water-energy-food nexus and climate change in cities. Tradução . Cham: Springer, 2022. . . Acesso em: 25 set. 2024.
APA
Moreira, F. de A., Fontana, M. D., Bertolini, A. M., Serpe, P. M., Malheiros, T. F., & Giulio, G. M. D. (2022). Urban living labs and the water-energy-food nexus: experiences from the GLOCULL Project in São Paulo, Brazil. In Water-energy-food nexus and climate change in cities. Cham: Springer.
NLM
Moreira F de A, Fontana MD, Bertolini AM, Serpe PM, Malheiros TF, Giulio GMD. Urban living labs and the water-energy-food nexus: experiences from the GLOCULL Project in São Paulo, Brazil. In: Water-energy-food nexus and climate change in cities. Cham: Springer; 2022. [citado 2024 set. 25 ]
Vancouver
Moreira F de A, Fontana MD, Bertolini AM, Serpe PM, Malheiros TF, Giulio GMD. Urban living labs and the water-energy-food nexus: experiences from the GLOCULL Project in São Paulo, Brazil. In: Water-energy-food nexus and climate change in cities. Cham: Springer; 2022. [citado 2024 set. 25 ]
Artigo de periodico
Versatile unsupervised anomaly detection method for RTE-based networks (2022)
Sestito, Guilherme Serpa ; Turcato, Afonso Celso ; Dias, Andre Luis ; Ferrari, Paolo; Silva, Maíra Martins da
Fonte: Expert Systems with Applications. Unidade: EESC
Assuntos: REDE DE COMUNICAÇÃO, FALHA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SESTITO, Guilherme Serpa et al. Versatile unsupervised anomaly detection method for RTE-based networks. Expert Systems with Applications, v. 206, p. 1-8, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.eswa.2022.117751. Acesso em: 25 set. 2024.
APA
Sestito, G. S., Turcato, A. C., Dias, A. L., Ferrari, P., & Silva, M. M. da. (2022). Versatile unsupervised anomaly detection method for RTE-based networks. Expert Systems with Applications, 206, 1-8. doi:10.1016/j.eswa.2022.117751
NLM
Sestito GS, Turcato AC, Dias AL, Ferrari P, Silva MM da. Versatile unsupervised anomaly detection method for RTE-based networks [Internet]. Expert Systems with Applications. 2022 ; 206 1-8.[citado 2024 set. 25 ] Available from: https://doi.org/10.1016/j.eswa.2022.117751
Vancouver
Sestito GS, Turcato AC, Dias AL, Ferrari P, Silva MM da. Versatile unsupervised anomaly detection method for RTE-based networks [Internet]. Expert Systems with Applications. 2022 ; 206 1-8.[citado 2024 set. 25 ] Available from: https://doi.org/10.1016/j.eswa.2022.117751
Artigo de periodico
Editorial: variable impedance control and learning in complex interaction scenarios: challenges and opportunities (2022)
Abu-Dakka, Fares J.; Saveriano, Matteo; Huber, Meghan E; Cunha, Thiago Boaventura
Fonte: IEEE Robotics and Automation Letters. Unidade: EESC
Assuntos: ROBÔS, IMPEDÂNCIA ELÉTRICA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ABU-DAKKA, Fares J. et al. Editorial: variable impedance control and learning in complex interaction scenarios: challenges and opportunities. IEEE Robotics and Automation Letters, v. 7, n. 4, p. 12158-12160, 2022Tradução . . Disponível em: https://doi.org/10.1109/LRA.2022.3213197. Acesso em: 25 set. 2024.
APA
Abu-Dakka, F. J., Saveriano, M., Huber, M. E., & Cunha, T. B. (2022). Editorial: variable impedance control and learning in complex interaction scenarios: challenges and opportunities. IEEE Robotics and Automation Letters, 7( 4), 12158-12160. doi:10.1109/LRA.2022.3213197
NLM
Abu-Dakka FJ, Saveriano M, Huber ME, Cunha TB. Editorial: variable impedance control and learning in complex interaction scenarios: challenges and opportunities [Internet]. IEEE Robotics and Automation Letters. 2022 ; 7( 4): 12158-12160.[citado 2024 set. 25 ] Available from: https://doi.org/10.1109/LRA.2022.3213197
Vancouver
Abu-Dakka FJ, Saveriano M, Huber ME, Cunha TB. Editorial: variable impedance control and learning in complex interaction scenarios: challenges and opportunities [Internet]. IEEE Robotics and Automation Letters. 2022 ; 7( 4): 12158-12160.[citado 2024 set. 25 ] Available from: https://doi.org/10.1109/LRA.2022.3213197
Artigo de periodico
Comparative homology of Pleurotus ostreatus laccase enzyme: Swiss model or Modeller? (2022)
Silva, Marco Antônio ; Nascimento Júnior, José Cordeiro do ; Thomaz, Douglas Vieira ; Maia, Rafael Trindade ; Amador, Vinícius Costa ; Tommaso, Giovana ; Coelho, Glauciane Danusa
Fonte: Journal of Biomolecular Structure and Dynamics. Unidades: FZEA, EESC
Assuntos: ENZIMAS, HOMOLOGIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Marco Antônio et al. Comparative homology of Pleurotus ostreatus laccase enzyme: Swiss model or Modeller?. Journal of Biomolecular Structure and Dynamics, 2022Tradução . . Disponível em: https://doi.org/10.1080/07391102.2022.2138975. Acesso em: 25 set. 2024.
APA
Silva, M. A., Nascimento Júnior, J. C. do, Thomaz, D. V., Maia, R. T., Amador, V. C., Tommaso, G., & Coelho, G. D. (2022). Comparative homology of Pleurotus ostreatus laccase enzyme: Swiss model or Modeller? Journal of Biomolecular Structure and Dynamics. doi:10.1080/07391102.2022.2138975
NLM
Silva MA, Nascimento Júnior JC do, Thomaz DV, Maia RT, Amador VC, Tommaso G, Coelho GD. Comparative homology of Pleurotus ostreatus laccase enzyme: Swiss model or Modeller? [Internet]. Journal of Biomolecular Structure and Dynamics. 2022 ;[citado 2024 set. 25 ] Available from: https://doi.org/10.1080/07391102.2022.2138975
Vancouver
Silva MA, Nascimento Júnior JC do, Thomaz DV, Maia RT, Amador VC, Tommaso G, Coelho GD. Comparative homology of Pleurotus ostreatus laccase enzyme: Swiss model or Modeller? [Internet]. Journal of Biomolecular Structure and Dynamics. 2022 ;[citado 2024 set. 25 ] Available from: https://doi.org/10.1080/07391102.2022.2138975
Trabalho de evento
Electromyography-based, robust hand motion classification employing temporal multi-channel vision transformers (2022)
Godoy, Ricardo Vilela de; Lahr, Gustavo José Giardini; Dwivedi, Anany; Reis,^Tharik^José^Sorrino^dos; Polegato, Paulo Henrique; Becker, Marcelo ; Caurin, Glauco Augusto de Paula ; Liarokapis, Minas
Fonte: Proceedings. Nome do evento: IEEE RAS/EMBS International Conference for Biomedical Robotics and Biomechatronics - BioRob. Unidade: EESC
Assunto: ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GODOY, Ricardo Vilela de et al. Electromyography-based, robust hand motion classification employing temporal multi-channel vision transformers. 2022, Anais.. Piscataway, NJ, USA: IEEE, 2022. Disponível em: https://doi.org/10.1109/BioRob52689.2022.9925307. Acesso em: 25 set. 2024.
APA
Godoy, R. V. de, Lahr, G. J. G., Dwivedi, A., Reis, ^T. ^J. ^S. ^dos, Polegato, P. H., Becker, M., et al. (2022). Electromyography-based, robust hand motion classification employing temporal multi-channel vision transformers. In Proceedings. Piscataway, NJ, USA: IEEE. doi:10.1109/BioRob52689.2022.9925307
NLM
Godoy RV de, Lahr GJG, Dwivedi A, Reis ^T^J^S^dos, Polegato PH, Becker M, Caurin GA de P, Liarokapis M. Electromyography-based, robust hand motion classification employing temporal multi-channel vision transformers [Internet]. Proceedings. 2022 ;[citado 2024 set. 25 ] Available from: https://doi.org/10.1109/BioRob52689.2022.9925307
Vancouver
Godoy RV de, Lahr GJG, Dwivedi A, Reis ^T^J^S^dos, Polegato PH, Becker M, Caurin GA de P, Liarokapis M. Electromyography-based, robust hand motion classification employing temporal multi-channel vision transformers [Internet]. Proceedings. 2022 ;[citado 2024 set. 25 ] Available from: https://doi.org/10.1109/BioRob52689.2022.9925307
Artigo de periodico
Exploring the relations between supply chain performance and organizational culture: a fuzzy grey group decision model (2021)
Zanon, Lucas Gabriel; Marcelloni, Francesco; Gerólamo, Mateus Cecílio ; Carpinetti, Luiz Cesar Ribeiro
Fonte: International Journal of Production Economics. Unidade: EESC
Assuntos: CADEIA DE SUPRIMENTOS, CULTURA ORGANIZACIONAL, TOMADA DE DECISÃO, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ZANON, Lucas Gabriel et al. Exploring the relations between supply chain performance and organizational culture: a fuzzy grey group decision model. International Journal of Production Economics, v. 233, p. 1-23, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.ijpe.2020.108023. Acesso em: 25 set. 2024.
APA
Zanon, L. G., Marcelloni, F., Gerólamo, M. C., & Carpinetti, L. C. R. (2021). Exploring the relations between supply chain performance and organizational culture: a fuzzy grey group decision model. International Journal of Production Economics, 233, 1-23. doi:10.1016/j.ijpe.2020.108023
NLM
Zanon LG, Marcelloni F, Gerólamo MC, Carpinetti LCR. Exploring the relations between supply chain performance and organizational culture: a fuzzy grey group decision model [Internet]. International Journal of Production Economics. 2021 ; 233 1-23.[citado 2024 set. 25 ] Available from: https://doi.org/10.1016/j.ijpe.2020.108023
Vancouver
Zanon LG, Marcelloni F, Gerólamo MC, Carpinetti LCR. Exploring the relations between supply chain performance and organizational culture: a fuzzy grey group decision model [Internet]. International Journal of Production Economics. 2021 ; 233 1-23.[citado 2024 set. 25 ] Available from: https://doi.org/10.1016/j.ijpe.2020.108023
Artigo de periodico
Enhancing knowledge management in the PSS detailed design: a case study in a food and bakery machinery company (2021)
Sassanelli, Claudio; Fernandes, Sânia da Costa; Rozenfeld, Henrique ; Costa, Janaina Mascarenhas Hornos da ; Terzi, Sergio
Fonte: Concurrent Engineering: Research and Applications. Unidade: EESC
Assuntos: SISTEMA PRODUTO-SERVIÇO (PSS), GESTÃO DO CONHECIMENTO, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SASSANELLI, Claudio et al. Enhancing knowledge management in the PSS detailed design: a case study in a food and bakery machinery company. Concurrent Engineering: Research and Applications, p. 1-14, 2021Tradução . . Disponível em: https://doi.org/10.1177/1063293X21991806. Acesso em: 25 set. 2024.
APA
Sassanelli, C., Fernandes, S. da C., Rozenfeld, H., Costa, J. M. H. da, & Terzi, S. (2021). Enhancing knowledge management in the PSS detailed design: a case study in a food and bakery machinery company. Concurrent Engineering: Research and Applications, 1-14. doi:10.1177/1063293X21991806
NLM
Sassanelli C, Fernandes S da C, Rozenfeld H, Costa JMH da, Terzi S. Enhancing knowledge management in the PSS detailed design: a case study in a food and bakery machinery company [Internet]. Concurrent Engineering: Research and Applications. 2021 ; 1-14.[citado 2024 set. 25 ] Available from: https://doi.org/10.1177/1063293X21991806
Vancouver
Sassanelli C, Fernandes S da C, Rozenfeld H, Costa JMH da, Terzi S. Enhancing knowledge management in the PSS detailed design: a case study in a food and bakery machinery company [Internet]. Concurrent Engineering: Research and Applications. 2021 ; 1-14.[citado 2024 set. 25 ] Available from: https://doi.org/10.1177/1063293X21991806

Unidades USP

ReP

Filtros

Tipo de material

Unidades USP

Departamento

Autores

Autores USP

Ano de publicação

Assuntos

Título da fonte

Editora

Nome do evento

País de publicação

Agência de fomento

Indexado em

Afiliação dos autores externos não normalizada

País das instituições de afiliação dos autores externos