Effect of Process Parameters in Copper‐Wire Drawing (2020)
- Authors:
- Autor USP: MARTINEZ, GUSTAVO ARISTIDES SANTANA - EEL
- Unidade: EEL
- DOI: 10.3390/met10010105
- Subjects: TRIBOLOGIA; MÉTODO DOS ELEMENTOS FINITOS; TREFILAÇÃO
- Keywords: wire drawing; die geometry; tribology; finite element method
- Language: Inglês
- Abstract: The efforts to increase the operating speed of the wire drawing process play a crucial role regarding the industrial productivity. The problem is closely related to various features such as heat generation, material plastic deformation, as well as the friction at the wire/die interface. For instance, the introduction of specific lubricants at the interface between the die and the wire may efficiently reduce the friction or in another context, induce a difference in friction among different regimes, as for the case of hydrodynamic lubrication. The present study systematically explores various aspects concerning the drawing process of an electrolytic tough pitch copper wire. To be specific, the drawing speed, drawing force, die temperature, lubricant temperature, and stress distributions are analysed by using experimental as well as numerical approaches. The obtained results demonstrate how the drawing stress and temperature are affected by the variation of the friction coefficient, die geometry, and drawing speed. It is argued that such a study might help in optimizing the operational parameters of the wire drawing process, which further leads to the improvement of the lubrication conditions and product quality while minimizing the energy consumption during the process.
- Imprenta:
- Source:
- Este periódico é de acesso aberto
- Este artigo NÃO é de acesso aberto
-
ABNT
MARTINEZ, Gustavo Aristides Santana et al. Effect of Process Parameters in Copper‐Wire Drawing. Metals, v. 10, n. 1, p. 1-11, 2020Tradução . . Disponível em: https://doi.org/10.3390/met10010105. Acesso em: 13 fev. 2026. -
APA
Martinez, G. A. S., Qian, W. -L., Kabayama, L. K., & Prisco, U. (2020). Effect of Process Parameters in Copper‐Wire Drawing. Metals, 10( 1), 1-11. doi:10.3390/met10010105 -
NLM
Martinez GAS, Qian W-L, Kabayama LK, Prisco U. Effect of Process Parameters in Copper‐Wire Drawing [Internet]. Metals. 2020 ; 10( 1): 1-11.[citado 2026 fev. 13 ] Available from: https://doi.org/10.3390/met10010105 -
Vancouver
Martinez GAS, Qian W-L, Kabayama LK, Prisco U. Effect of Process Parameters in Copper‐Wire Drawing [Internet]. Metals. 2020 ; 10( 1): 1-11.[citado 2026 fev. 13 ] Available from: https://doi.org/10.3390/met10010105 - Effect of die pressure on the lubricating regimes achieved in wire drawing
- Effect of Process Parameters in Copper‐Wire Drawing
- Achieving a Toothed Gear on Presses
- The influences of the variable speed and internal die geometry on the performance of two commercial soluble oils in the drawing process of pure copper fine wire
- Study and analysis of the wiredrawing of CuZn37 wires via numerical simulations and slab method
- Integrated triz with qfd applied to automotive valve industry
- Fine Electrolytic Tough Pitch Copper Multistage Wiredrawing Pass Schedule Design by Analytical and Numerical Methods
- Zn-AL Anticorrosive Coating Adapted to Obtain Protected Steel Wires
- Drawing tantalum encapsulated in the cooper pipe
- Study and analysis of the wiredrawing of CuZn37 wires via numerical simulations and slab method
Informações sobre o DOI: 10.3390/met10010105 (Fonte: oaDOI API)
How to cite
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
