Achieving a Toothed Gear on Presses (2020)
- Authors:
- Autor USP: MARTINEZ, GUSTAVO ARISTIDES SANTANA - EEL
- Unidade: EEL
- DOI: 10.3390/proceedings2020063057
- Assunto: ENGRENAGENS
- Keywords: toothed gear; hot deformation; presses; deformation roller; fibrous structure; Deformação a quente
- Language: Inglês
- Abstract: This paper presents a device that, in final connection with presses, allows toothed gear (with a crown similar to a toothed wheel with right teeth) to be achieved by hot deformation starting from a cylindrical steel bar. For this, finite element simulations were performed in Forge software. The proposed device has 23 rollers, so for the simulation process, a slice representing a part (the 23rd) of a circle which simplifies the essential functionality of this device was taken into consideration.
- Imprenta:
- Source:
- Título: Proceedings
- ISSN: 2504-3900
- Volume/Número/Paginação/Ano: v.63, n.1, p.1-8, 2020
- Status:
- Artigo publicado em periódico de acesso aberto (Gold Open Access)
- Versão do Documento:
- Versão publicada (Published version)
- Acessar versão aberta:
-
ABNT
TINTELECAN, Marius et al. Achieving a Toothed Gear on Presses. Proceedings, v. 63, n. 1, p. 1-8, 2020Tradução . . Disponível em: https://doi.org/10.3390/proceedings2020063057. Acesso em: 01 abr. 2026. -
APA
Tintelecan, M., Varvara, D. -A. I., Alabanda, O. R., Sas-Boca, I. -M., Marian, I., & Martinez, G. A. S. (2020). Achieving a Toothed Gear on Presses. Proceedings, 63( 1), 1-8. doi:10.3390/proceedings2020063057 -
NLM
Tintelecan M, Varvara D-AI, Alabanda OR, Sas-Boca I-M, Marian I, Martinez GAS. Achieving a Toothed Gear on Presses [Internet]. Proceedings. 2020 ;63( 1): 1-8.[citado 2026 abr. 01 ] Available from: https://doi.org/10.3390/proceedings2020063057 -
Vancouver
Tintelecan M, Varvara D-AI, Alabanda OR, Sas-Boca I-M, Marian I, Martinez GAS. Achieving a Toothed Gear on Presses [Internet]. Proceedings. 2020 ;63( 1): 1-8.[citado 2026 abr. 01 ] Available from: https://doi.org/10.3390/proceedings2020063057 - Effect of die pressure on the lubricating regimes achieved in wire drawing
- Effect of Process Parameters in Copper‐Wire Drawing
- The influences of the variable speed and internal die geometry on the performance of two commercial soluble oils in the drawing process of pure copper fine wire
- Study and analysis of the wiredrawing of CuZn37 wires via numerical simulations and slab method
- Integrated triz with qfd applied to automotive valve industry
- Fine Electrolytic Tough Pitch Copper Multistage Wiredrawing Pass Schedule Design by Analytical and Numerical Methods
- Zn-AL Anticorrosive Coating Adapted to Obtain Protected Steel Wires
- Drawing tantalum encapsulated in the cooper pipe
- Study and analysis of the wiredrawing of CuZn37 wires via numerical simulations and slab method
- Effect of cold-working process on cyclic deformation of electrolytic copper
Informações sobre a disponibilidade de versões do artigo em acesso aberto coletadas automaticamente via oaDOI API (Unpaywall).
Por se tratar de integração com serviço externo, podem existir diferentes versões do trabalho (como preprints ou postprints), que podem diferir da versão publicada.
How to cite
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
