Study and analysis of the wiredrawing of CuZn37 wires via numerical simulations and slab method (2021)
- Authors:
- Autor USP: MARTINEZ, GUSTAVO ARISTIDES SANTANA - EEL
- Unidade: EEL
- DOI: 10.1088/1757-899X/1193/1/012014
- Assunto: TREFILAÇÃO
- Keywords: Wiredrawing; Finite element method; Slab method; CuZn37 brass; Metal forming; TREFILAÇÃO
- Language: Inglês
- Abstract: Improving efficiency and productivity of industrial manufacturing activities is crucial in today's global economy and the advanced engineering methods they have proven to be an effective solution to better understand the operation of the processes. The technological problem in wiredrawing is conditioned by multiple factors such as drawing die geometry, tribological system, process speed and the state of the metal to be drawn, among others. A wire rod of CuZn37 alloy brass with Ø8 mm is obtained by continuous casting process from electrolytic materials. The structural state of the initial wire rod and the draft sequence conditions the deformations and residual stresses accumulated in its cross section, affecting the sequential process and final quality. The present work proposes a complete analytical-numerical study aided to the better understanding of the problem for the design of a process proposal for an adequate continuous wiredrawing sequence for the production of Ø2 mm brass wire. An industrial sequence without intermediate annealing was evaluated by the analytical-numerical procedure allowing to better understand the technological problems involved. This methodology has allowed to check that it is not possible to achieve such a high degree of reduction ratio above of r=0.70÷0.75, without applying intermediate annealing heat treatment.
- Imprenta:
- Source:
- Título: Wire & Cable Technology International Inc.
- ISSN: 1757-8981
- Volume/Número/Paginação/Ano: v. nov-dez 2021, p.110-116, 2021
- Este periódico é de acesso aberto
- Este artigo é de acesso aberto
- URL de acesso aberto
- Cor do Acesso Aberto: gold
-
ABNT
RODRÍGUEZ, Oscar Alabanda et al. Study and analysis of the wiredrawing of CuZn37 wires via numerical simulations and slab method. Wire & Cable Technology International Inc., v. nov-dez 2021, p. 110-116, 2021Tradução . . Disponível em: https://doi.org/10.1088/1757-899X/1193/1/012014. Acesso em: 29 dez. 2025. -
APA
Rodríguez, O. A., Martinez, G. A. S., del Rey, J. C., & Guerrero, G. (2021). Study and analysis of the wiredrawing of CuZn37 wires via numerical simulations and slab method. Wire & Cable Technology International Inc., nov-dez 2021, 110-116. doi:10.1088/1757-899X/1193/1/012014 -
NLM
Rodríguez OA, Martinez GAS, del Rey JC, Guerrero G. Study and analysis of the wiredrawing of CuZn37 wires via numerical simulations and slab method [Internet]. Wire & Cable Technology International Inc. 2021 ; nov-dez 2021 110-116.[citado 2025 dez. 29 ] Available from: https://doi.org/10.1088/1757-899X/1193/1/012014 -
Vancouver
Rodríguez OA, Martinez GAS, del Rey JC, Guerrero G. Study and analysis of the wiredrawing of CuZn37 wires via numerical simulations and slab method [Internet]. Wire & Cable Technology International Inc. 2021 ; nov-dez 2021 110-116.[citado 2025 dez. 29 ] Available from: https://doi.org/10.1088/1757-899X/1193/1/012014 - The influences of the variable speed and internal die geometry on the performance of two commercial soluble oils in the drawing process of pure copper fine wire
- Zn-AL Anticorrosive Coating Adapted to Obtain Protected Steel Wires
- Integrated triz with qfd applied to automotive valve industry
- Drawing tantalum encapsulated in the cooper pipe
- Fine Electrolytic Tough Pitch Copper Multistage Wiredrawing Pass Schedule Design by Analytical and Numerical Methods
- Achieving a Toothed Gear on Presses
- Effect of die pressure on the lubricating regimes achieved in wire drawing
- Effect of Process Parameters in Copper‐Wire Drawing
- Influences of Different Die Bearing Geometries on the Wire-Drawing Process
- Effect of cold-working process on cyclic deformation of electrolytic copper
Informações sobre o DOI: 10.1088/1757-899X/1193/1/012014 (Fonte: oaDOI API)
How to cite
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
