ReP USP - Resultado da busca

Artigo de periodico
An experimental investigation on R245fa and R1233zd(E) flow boiling at high saturation temperatures in a horizontal small diameter channel (2024)
Marchetto, Daniel Borba; Revellin, R; Rullière, R; Ribatski, Gherhardt
Source: International Journal of Heat and Mass Transfer. Unidade: EESC
Subjects: TRANSFERÊNCIA DE CALOR, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARCHETTO, Daniel Borba et al. An experimental investigation on R245fa and R1233zd(E) flow boiling at high saturation temperatures in a horizontal small diameter channel. International Journal of Heat and Mass Transfer, v. 220, p. 1-19, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.ijheatmasstransfer.2023.124986. Acesso em: 10 jun. 2024.
APA
Marchetto, D. B., Revellin, R., Rullière, R., & Ribatski, G. (2024). An experimental investigation on R245fa and R1233zd(E) flow boiling at high saturation temperatures in a horizontal small diameter channel. International Journal of Heat and Mass Transfer, 220, 1-19. doi:10.1016/j.ijheatmasstransfer.2023.124986
NLM
Marchetto DB, Revellin R, Rullière R, Ribatski G. An experimental investigation on R245fa and R1233zd(E) flow boiling at high saturation temperatures in a horizontal small diameter channel [Internet]. International Journal of Heat and Mass Transfer. 2024 ; 220 1-19.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1016/j.ijheatmasstransfer.2023.124986
Vancouver
Marchetto DB, Revellin R, Rullière R, Ribatski G. An experimental investigation on R245fa and R1233zd(E) flow boiling at high saturation temperatures in a horizontal small diameter channel [Internet]. International Journal of Heat and Mass Transfer. 2024 ; 220 1-19.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1016/j.ijheatmasstransfer.2023.124986
Artigo de periodico
A review on bistable composite laminates for aerospace applications (2024)
Lemos, Diego Magela; Marques, Flavio Donizeti ; Ferreira, Antonio Joaquim Mendes
Source: Composite Structures. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, LAMINADOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LEMOS, Diego Magela e MARQUES, Flavio Donizeti e FERREIRA, Antonio Joaquim Mendes. A review on bistable composite laminates for aerospace applications. Composite Structures, v. 329, p. 1-21, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.compstruct.2023.117756. Acesso em: 10 jun. 2024.
APA
Lemos, D. M., Marques, F. D., & Ferreira, A. J. M. (2024). A review on bistable composite laminates for aerospace applications. Composite Structures, 329, 1-21. doi:10.1016/j.compstruct.2023.117756
NLM
Lemos DM, Marques FD, Ferreira AJM. A review on bistable composite laminates for aerospace applications [Internet]. Composite Structures. 2024 ; 329 1-21.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1016/j.compstruct.2023.117756
Vancouver
Lemos DM, Marques FD, Ferreira AJM. A review on bistable composite laminates for aerospace applications [Internet]. Composite Structures. 2024 ; 329 1-21.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1016/j.compstruct.2023.117756
Artigo de periodico
Critical heat flux, heat transfer and pressure drop at high mass fluxes for R123 in a single microchannel (2024)
Roldão, Thalles Coimbra Borba; Tibiriçá, Cristiano Bigonha
Source: International Journal of Heat and Mass Transfer. Unidade: EESC
Subjects: ESCOAMENTO BIFÁSICO, TRANSFERÊNCIA DE CALOR, TRANSFERÊNCIA DE CALOR, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ROLDÃO, Thalles Coimbra Borba e TIBIRIÇÁ, Cristiano Bigonha. Critical heat flux, heat transfer and pressure drop at high mass fluxes for R123 in a single microchannel. International Journal of Heat and Mass Transfer, v. 222, p. 1-20, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.ijheatmasstransfer.2023.125143. Acesso em: 10 jun. 2024.
APA
Roldão, T. C. B., & Tibiriçá, C. B. (2024). Critical heat flux, heat transfer and pressure drop at high mass fluxes for R123 in a single microchannel. International Journal of Heat and Mass Transfer, 222, 1-20. doi:10.1016/j.ijheatmasstransfer.2023.125143
NLM
Roldão TCB, Tibiriçá CB. Critical heat flux, heat transfer and pressure drop at high mass fluxes for R123 in a single microchannel [Internet]. International Journal of Heat and Mass Transfer. 2024 ; 222 1-20.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1016/j.ijheatmasstransfer.2023.125143
Vancouver
Roldão TCB, Tibiriçá CB. Critical heat flux, heat transfer and pressure drop at high mass fluxes for R123 in a single microchannel [Internet]. International Journal of Heat and Mass Transfer. 2024 ; 222 1-20.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1016/j.ijheatmasstransfer.2023.125143
Artigo de periodico
Polymeric composites in extrusion-basedadditive manufacturing: a systematic review (2024)
Rodrigues, Alina de Souza Leão; Pires, Ana Caroline Batista; Barbosa, Patrícia Alves; Silveira, Zilda de Castro
Source: Polymer Composites. Unidade: EESC
Subjects: IMPRESSÃO 3-D, POLÍMEROS (MATERIAIS), MATERIAIS COMPÓSITOS DE FIBRAS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RODRIGUES, Alina de Souza Leão et al. Polymeric composites in extrusion-basedadditive manufacturing: a systematic review. Polymer Composites, p. 1-30, 2024Tradução . . Disponível em: http://dx.doi.org/10.1002/pc.28269. Acesso em: 10 jun. 2024.
APA
Rodrigues, A. de S. L., Pires, A. C. B., Barbosa, P. A., & Silveira, Z. de C. (2024). Polymeric composites in extrusion-basedadditive manufacturing: a systematic review. Polymer Composites, 1-30. doi:10.1002/pc.28269
NLM
Rodrigues A de SL, Pires ACB, Barbosa PA, Silveira Z de C. Polymeric composites in extrusion-basedadditive manufacturing: a systematic review [Internet]. Polymer Composites. 2024 ; 1-30.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1002/pc.28269
Vancouver
Rodrigues A de SL, Pires ACB, Barbosa PA, Silveira Z de C. Polymeric composites in extrusion-basedadditive manufacturing: a systematic review [Internet]. Polymer Composites. 2024 ; 1-30.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1002/pc.28269
Artigo de periodico
Dynamic mesh analysis by numerical simulation of internal combustion engines (2024)
Silva, Jose Antonio da; Silva, Lucas Pereira da; Campos, Julio Cesar Costa; Siqueira, Antonio Marcos de Oliveira; Gurgel, Alexandre; Cabezas Gómez, Luben
Source: REM: International Engineering Journal. Unidade: EESC
Subjects: MOTORES DE COMBUSTÃO INTERNA, TURBULÊNCIA, DINÂMICA DOS FLUÍDOS COMPUTACIONAL, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Jose Antonio da et al. Dynamic mesh analysis by numerical simulation of internal combustion engines. REM: International Engineering Journal, v. 77, n. Ja/Mar. 2024, p. 27-37, 2024Tradução . . Disponível em: https://dx.doi.org/10.1590/0370-44672023770003. Acesso em: 10 jun. 2024.
APA
Silva, J. A. da, Silva, L. P. da, Campos, J. C. C., Siqueira, A. M. de O., Gurgel, A., & Cabezas Gómez, L. (2024). Dynamic mesh analysis by numerical simulation of internal combustion engines. REM: International Engineering Journal, 77( Ja/Mar. 2024), 27-37. doi:10.1590/0370-44672023770003
NLM
Silva JA da, Silva LP da, Campos JCC, Siqueira AM de O, Gurgel A, Cabezas Gómez L. Dynamic mesh analysis by numerical simulation of internal combustion engines [Internet]. REM: International Engineering Journal. 2024 ; 77( Ja/Mar. 2024): 27-37.[citado 2024 jun. 10 ] Available from: https://dx.doi.org/10.1590/0370-44672023770003
Vancouver
Silva JA da, Silva LP da, Campos JCC, Siqueira AM de O, Gurgel A, Cabezas Gómez L. Dynamic mesh analysis by numerical simulation of internal combustion engines [Internet]. REM: International Engineering Journal. 2024 ; 77( Ja/Mar. 2024): 27-37.[citado 2024 jun. 10 ] Available from: https://dx.doi.org/10.1590/0370-44672023770003
Artigo de periodico
Wave analysis of rotors with longitudinal periodicity (2024)
Lamas, Patrick Bueno; Nicoletti, Rodrigo
Source: Journal of Sound and Vibration. Unidade: EESC
Subjects: ROTOR, DINÂMICA DE MÁQUINAS, VIBRAÇÕES DE MÁQUINAS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LAMAS, Patrick Bueno e NICOLETTI, Rodrigo. Wave analysis of rotors with longitudinal periodicity. Journal of Sound and Vibration, v. 571, p. 1-12, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.jsv.2023.118095. Acesso em: 10 jun. 2024.
APA
Lamas, P. B., & Nicoletti, R. (2024). Wave analysis of rotors with longitudinal periodicity. Journal of Sound and Vibration, 571, 1-12. doi:10.1016/j.jsv.2023.118095
NLM
Lamas PB, Nicoletti R. Wave analysis of rotors with longitudinal periodicity [Internet]. Journal of Sound and Vibration. 2024 ; 571 1-12.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1016/j.jsv.2023.118095
Vancouver
Lamas PB, Nicoletti R. Wave analysis of rotors with longitudinal periodicity [Internet]. Journal of Sound and Vibration. 2024 ; 571 1-12.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1016/j.jsv.2023.118095
Artigo de periodico
Hybrid vision/strain-based control strategy for a parallel manipulator with flexible links (2024)
Silva, Maíra Martins da ; Colombo, Fernanda Thaís ; Oliveira, Gustavo Correa de; Oliveira, Leopoldo Pisanelli Rodrigues de
Source: Mechanism and Machine Theory. Unidade: EESC
Subjects: MANIPULADORES MECÂNICOS, VISÃO COMPUTACIONAL, VIBRAÇÕES, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Maíra Martins da et al. Hybrid vision/strain-based control strategy for a parallel manipulator with flexible links. Mechanism and Machine Theory, v. 191, p. 1-14, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.mechmachtheory.2023.105508. Acesso em: 10 jun. 2024.
APA
Silva, M. M. da, Colombo, F. T., Oliveira, G. C. de, & Oliveira, L. P. R. de. (2024). Hybrid vision/strain-based control strategy for a parallel manipulator with flexible links. Mechanism and Machine Theory, 191, 1-14. doi:10.1016/j.mechmachtheory.2023.105508
NLM
Silva MM da, Colombo FT, Oliveira GC de, Oliveira LPR de. Hybrid vision/strain-based control strategy for a parallel manipulator with flexible links [Internet]. Mechanism and Machine Theory. 2024 ; 191 1-14.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1016/j.mechmachtheory.2023.105508
Vancouver
Silva MM da, Colombo FT, Oliveira GC de, Oliveira LPR de. Hybrid vision/strain-based control strategy for a parallel manipulator with flexible links [Internet]. Mechanism and Machine Theory. 2024 ; 191 1-14.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1016/j.mechmachtheory.2023.105508
Artigo de periodico
Fused filament fabrication of partially stabilized zirconia (3Y-TZP) parts (2024)
Camargo, Italo Leite de; Verza, Jhonata R; Garcia, Joaquin; Di Federico, Denise; Fortulan, Carlos Alberto ; Luz, Ana Paula da
Source: Materials Letters. Unidade: EESC
Subjects: ZIRCÔNIA, TECNOLOGIA MECÂNICA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAMARGO, Italo Leite de et al. Fused filament fabrication of partially stabilized zirconia (3Y-TZP) parts. Materials Letters, v. 355, p. 1-4, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.matlet.2023.135510. Acesso em: 10 jun. 2024.
APA
Camargo, I. L. de, Verza, J. R., Garcia, J., Di Federico, D., Fortulan, C. A., & Luz, A. P. da. (2024). Fused filament fabrication of partially stabilized zirconia (3Y-TZP) parts. Materials Letters, 355, 1-4. doi:10.1016/j.matlet.2023.135510
NLM
Camargo IL de, Verza JR, Garcia J, Di Federico D, Fortulan CA, Luz AP da. Fused filament fabrication of partially stabilized zirconia (3Y-TZP) parts [Internet]. Materials Letters. 2024 ; 355 1-4.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1016/j.matlet.2023.135510
Vancouver
Camargo IL de, Verza JR, Garcia J, Di Federico D, Fortulan CA, Luz AP da. Fused filament fabrication of partially stabilized zirconia (3Y-TZP) parts [Internet]. Materials Letters. 2024 ; 355 1-4.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1016/j.matlet.2023.135510
Artigo de periodico
Critical heat flux at high mass velocities in a microchannel and surface tension measurements for R514a (2024)
Roldão, Thalles Coimbra Borba; Tibiriçá, Cristiano Bigonha
Source: International Journal of Heat and Mass Transfer. Unidade: EESC
Subjects: TRANSPORTE DE MASSA, TRANSFERÊNCIA DE CALOR, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ROLDÃO, Thalles Coimbra Borba e TIBIRIÇÁ, Cristiano Bigonha. Critical heat flux at high mass velocities in a microchannel and surface tension measurements for R514a. International Journal of Heat and Mass Transfer, v. 227, p. 1-12, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.ijheatmasstransfer.2024.125575. Acesso em: 10 jun. 2024.
APA
Roldão, T. C. B., & Tibiriçá, C. B. (2024). Critical heat flux at high mass velocities in a microchannel and surface tension measurements for R514a. International Journal of Heat and Mass Transfer, 227, 1-12. doi:10.1016/j.ijheatmasstransfer.2024.125575
NLM
Roldão TCB, Tibiriçá CB. Critical heat flux at high mass velocities in a microchannel and surface tension measurements for R514a [Internet]. International Journal of Heat and Mass Transfer. 2024 ; 227 1-12.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1016/j.ijheatmasstransfer.2024.125575
Vancouver
Roldão TCB, Tibiriçá CB. Critical heat flux at high mass velocities in a microchannel and surface tension measurements for R514a [Internet]. International Journal of Heat and Mass Transfer. 2024 ; 227 1-12.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1016/j.ijheatmasstransfer.2024.125575
Artigo de periodico
Exploring human–exoskeleton interaction dynamics: an in-depth analysis of knee flexion–extension performance across varied robot assistance–resistance configurations (2024)
Mosconi, Denis ; Moreno, Yecid; Siqueira, Adriano Almeida Gonçalves
Source: Sensors. Conference titles: International Conference Series on Climbing and Walking Robots and the Support Technologies for Mobile Machines - CLAWAR. Unidade: EESC
Subjects: PRÓTESES ORTOPÉDICAS, JOELHO, ROBÓTICA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOSCONI, Denis e MORENO, Yecid e SIQUEIRA, Adriano Almeida Gonçalves. Exploring human–exoskeleton interaction dynamics: an in-depth analysis of knee flexion–extension performance across varied robot assistance–resistance configurations. Sensors, v. 24, n. 8, p. 1-11, 2024Tradução . . Disponível em: https://dx.doi.org/10.3390/s24082645. Acesso em: 10 jun. 2024.
APA
Mosconi, D., Moreno, Y., & Siqueira, A. A. G. (2024). Exploring human–exoskeleton interaction dynamics: an in-depth analysis of knee flexion–extension performance across varied robot assistance–resistance configurations. Sensors, 24( 8), 1-11. doi:10.3390/s24082645
NLM
Mosconi D, Moreno Y, Siqueira AAG. Exploring human–exoskeleton interaction dynamics: an in-depth analysis of knee flexion–extension performance across varied robot assistance–resistance configurations [Internet]. Sensors. 2024 ; 24( 8): 1-11.[citado 2024 jun. 10 ] Available from: https://dx.doi.org/10.3390/s24082645
Vancouver
Mosconi D, Moreno Y, Siqueira AAG. Exploring human–exoskeleton interaction dynamics: an in-depth analysis of knee flexion–extension performance across varied robot assistance–resistance configurations [Internet]. Sensors. 2024 ; 24( 8): 1-11.[citado 2024 jun. 10 ] Available from: https://dx.doi.org/10.3390/s24082645
Artigo de periodico
Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units (2024)
Martins, Ivan Talão; Fariñas Alvariño, Pablo; Cabezas Gómez, Luben
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: TRELIÇAS, FENÔMENOS DE TRANSPORTE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTINS, Ivan Talão e FARIÑAS ALVARIÑO, Pablo e CABEZAS GÓMEZ, Luben. Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 46, p. 1-28, 2024Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-024-04905-y. Acesso em: 10 jun. 2024.
APA
Martins, I. T., Fariñas Alvariño, P., & Cabezas Gómez, L. (2024). Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46, 1-28. doi:10.1007/s40430-024-04905-y
NLM
Martins IT, Fariñas Alvariño P, Cabezas Gómez L. Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-28.[citado 2024 jun. 10 ] Available from: https://dx.doi.org/10.1007/s40430-024-04905-y
Vancouver
Martins IT, Fariñas Alvariño P, Cabezas Gómez L. Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-28.[citado 2024 jun. 10 ] Available from: https://dx.doi.org/10.1007/s40430-024-04905-y
Artigo de periodico
Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty (2024)
Marini, Vinicius K.; Sorban, Bruno A.; Silva, Maíra Martins da ; Bortolussi, Roberto; Fleury, Agenor de Toledo ; Trigo, Flávio Celso
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidades: EESC, EP
Subjects: MOTORES DE COMBUSTÃO INTERNA, VEÍCULOS ELÉTRICOS, DINÂMICA VEICULAR, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARINI, Vinicius K. et al. Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 46, p. 1-14, 2024Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-023-04604-0. Acesso em: 10 jun. 2024.
APA
Marini, V. K., Sorban, B. A., Silva, M. M. da, Bortolussi, R., Fleury, A. de T., & Trigo, F. C. (2024). Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46, 1-14. doi:10.1007/s40430-023-04604-0
NLM
Marini VK, Sorban BA, Silva MM da, Bortolussi R, Fleury A de T, Trigo FC. Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-14.[citado 2024 jun. 10 ] Available from: https://dx.doi.org/10.1007/s40430-023-04604-0
Vancouver
Marini VK, Sorban BA, Silva MM da, Bortolussi R, Fleury A de T, Trigo FC. Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-14.[citado 2024 jun. 10 ] Available from: https://dx.doi.org/10.1007/s40430-023-04604-0
Artigo de periodico
Passive flutter mitigation with rotary nonlinear energy sink (2024)
Araujo, Gabriel Placeres; Silva, Jose Augusto Ignácio da; Marques, Flavio Donizeti
Source: Nonlinear Dynamics. Unidade: EESC
Subjects: DISSIPADORES DE ENERGIA, AEROELASTICIDADE DE AERONAVES, VIBRAÇÕES DE AERONAVES, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ARAUJO, Gabriel Placeres e SILVA, Jose Augusto Ignácio da e MARQUES, Flavio Donizeti. Passive flutter mitigation with rotary nonlinear energy sink. Nonlinear Dynamics, p. 1-19, 2024Tradução . . Disponível em: http://dx.doi.org/10.1007/s11071-024-09515-w. Acesso em: 10 jun. 2024.
APA
Araujo, G. P., Silva, J. A. I. da, & Marques, F. D. (2024). Passive flutter mitigation with rotary nonlinear energy sink. Nonlinear Dynamics, 1-19. doi:10.1007/s11071-024-09515-w
NLM
Araujo GP, Silva JAI da, Marques FD. Passive flutter mitigation with rotary nonlinear energy sink [Internet]. Nonlinear Dynamics. 2024 ; 1-19.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1007/s11071-024-09515-w
Vancouver
Araujo GP, Silva JAI da, Marques FD. Passive flutter mitigation with rotary nonlinear energy sink [Internet]. Nonlinear Dynamics. 2024 ; 1-19.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1007/s11071-024-09515-w
Artigo de periodico
Vibro-acoustic performance of graded piezoelectric metamaterial plates (2024)
Schimidt, Camila Sanches; Oliveira, Leopoldo Pisanelli Rodrigues de ; De Marqui Júnior, Carlos
Source: Composite Structures. Unidade: EESC
Subjects: PIEZOELETRICIDADE, MATERIAIS, ACÚSTICA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SCHIMIDT, Camila Sanches e OLIVEIRA, Leopoldo Pisanelli Rodrigues de e DE MARQUI JÚNIOR, Carlos. Vibro-acoustic performance of graded piezoelectric metamaterial plates. Composite Structures, v. 327, p. 1-10, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.compstruct.2023.117656. Acesso em: 10 jun. 2024.
APA
Schimidt, C. S., Oliveira, L. P. R. de, & De Marqui Júnior, C. (2024). Vibro-acoustic performance of graded piezoelectric metamaterial plates. Composite Structures, 327, 1-10. doi:10.1016/j.compstruct.2023.117656
NLM
Schimidt CS, Oliveira LPR de, De Marqui Júnior C. Vibro-acoustic performance of graded piezoelectric metamaterial plates [Internet]. Composite Structures. 2024 ; 327 1-10.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1016/j.compstruct.2023.117656
Vancouver
Schimidt CS, Oliveira LPR de, De Marqui Júnior C. Vibro-acoustic performance of graded piezoelectric metamaterial plates [Internet]. Composite Structures. 2024 ; 327 1-10.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1016/j.compstruct.2023.117656
Artigo de periodico
Real-time optimization of wing drag and lift performance using a movable leading edge (2024)
Camacho, Emanuel A. R.; Silva, Maíra Martins da ; Silva, Andre Resende Rodrigues; Marques, Flavio Donizeti
Source: Physics of Fluids. Unidade: EESC
Subjects: TEMPO-REAL, AERONAVES, ASAS DE AERONAVES, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAMACHO, Emanuel A. R. et al. Real-time optimization of wing drag and lift performance using a movable leading edge. Physics of Fluids, v. 36, n. 1, p. 1-11, 2024Tradução . . Disponível em: https://dx.doi.org/10.1063/5.0185716. Acesso em: 10 jun. 2024.
APA
Camacho, E. A. R., Silva, M. M. da, Silva, A. R. R., & Marques, F. D. (2024). Real-time optimization of wing drag and lift performance using a movable leading edge. Physics of Fluids, 36( 1), 1-11. doi:10.1063/5.0185716
NLM
Camacho EAR, Silva MM da, Silva ARR, Marques FD. Real-time optimization of wing drag and lift performance using a movable leading edge [Internet]. Physics of Fluids. 2024 ; 36( 1): 1-11.[citado 2024 jun. 10 ] Available from: https://dx.doi.org/10.1063/5.0185716
Vancouver
Camacho EAR, Silva MM da, Silva ARR, Marques FD. Real-time optimization of wing drag and lift performance using a movable leading edge [Internet]. Physics of Fluids. 2024 ; 36( 1): 1-11.[citado 2024 jun. 10 ] Available from: https://dx.doi.org/10.1063/5.0185716
Artigo de periodico
Reconfigurable piezoelectric metamaterial for selective noise directivity (2024)
Schimidt, Camila Sanches; Oliveira, Leopoldo Pisanelli Rodrigues de ; De Marqui Júnior, Carlos
Source: Journal of Sound and Vibration. Unidade: EESC
Subjects: VIBRAÇÕES, ACÚSTICA, PIEZOELETRICIDADE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SCHIMIDT, Camila Sanches e OLIVEIRA, Leopoldo Pisanelli Rodrigues de e DE MARQUI JÚNIOR, Carlos. Reconfigurable piezoelectric metamaterial for selective noise directivity. Journal of Sound and Vibration, v. 585, p. 1-13, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.jsv.2024.118472. Acesso em: 10 jun. 2024.
APA
Schimidt, C. S., Oliveira, L. P. R. de, & De Marqui Júnior, C. (2024). Reconfigurable piezoelectric metamaterial for selective noise directivity. Journal of Sound and Vibration, 585, 1-13. doi:10.1016/j.jsv.2024.118472
NLM
Schimidt CS, Oliveira LPR de, De Marqui Júnior C. Reconfigurable piezoelectric metamaterial for selective noise directivity [Internet]. Journal of Sound and Vibration. 2024 ; 585 1-13.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1016/j.jsv.2024.118472
Vancouver
Schimidt CS, Oliveira LPR de, De Marqui Júnior C. Reconfigurable piezoelectric metamaterial for selective noise directivity [Internet]. Journal of Sound and Vibration. 2024 ; 585 1-13.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1016/j.jsv.2024.118472
Trabalho de evento
LiDAR integration and robotics in aeronautical manufacturing for parts detection and localization (2024)
Souza, Bruno V.; Lahr, Gustavo José Giardini; Savazzi, José Otávio; Caurin, Glauco Augusto de Paula ; Porto, Arthur José Vieira
Conference titles: IEEE Latin American Symposium on Circuits and Systems - LASCAS. Unidade: EESC
Subjects: ROBÓTICA, AERONAVES, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUZA, Bruno V. et al. LiDAR integration and robotics in aeronautical manufacturing for parts detection and localization. 2024, Anais.. Piscataway, NJ, USA: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2024. Disponível em: http://dx.doi.org/10.1109/LASCAS60203.2024.10506170. Acesso em: 10 jun. 2024.
APA
Souza, B. V., Lahr, G. J. G., Savazzi, J. O., Caurin, G. A. de P., & Porto, A. J. V. (2024). LiDAR integration and robotics in aeronautical manufacturing for parts detection and localization. In . Piscataway, NJ, USA: Escola de Engenharia de São Carlos, Universidade de São Paulo. doi:10.1109/LASCAS60203.2024.10506170
NLM
Souza BV, Lahr GJG, Savazzi JO, Caurin GA de P, Porto AJV. LiDAR integration and robotics in aeronautical manufacturing for parts detection and localization [Internet]. 2024 ;[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1109/LASCAS60203.2024.10506170
Vancouver
Souza BV, Lahr GJG, Savazzi JO, Caurin GA de P, Porto AJV. LiDAR integration and robotics in aeronautical manufacturing for parts detection and localization [Internet]. 2024 ;[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1109/LASCAS60203.2024.10506170
Artigo de periodico
The spatial Fourier summation of corrugated beams and their band gap formation (2024)
Lamas, Patrick Bueno; Nicoletti, Rodrigo
Source: Mechanical Systems and Signal Processing. Unidade: EESC
Subjects: ONDAS ELETROMAGNÉTICAS, VIBRAÇÕES, FEIXES ÓPTICOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LAMAS, Patrick Bueno e NICOLETTI, Rodrigo. The spatial Fourier summation of corrugated beams and their band gap formation. Mechanical Systems and Signal Processing, v. 215, p. 1-12, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.ymssp.2024.111396. Acesso em: 10 jun. 2024.
APA
Lamas, P. B., & Nicoletti, R. (2024). The spatial Fourier summation of corrugated beams and their band gap formation. Mechanical Systems and Signal Processing, 215, 1-12. doi:10.1016/j.ymssp.2024.111396
NLM
Lamas PB, Nicoletti R. The spatial Fourier summation of corrugated beams and their band gap formation [Internet]. Mechanical Systems and Signal Processing. 2024 ; 215 1-12.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1016/j.ymssp.2024.111396
Vancouver
Lamas PB, Nicoletti R. The spatial Fourier summation of corrugated beams and their band gap formation [Internet]. Mechanical Systems and Signal Processing. 2024 ; 215 1-12.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1016/j.ymssp.2024.111396
Artigo de periodico
Multi-UAV collaborative system for the identification of surface cyanobacterial blooms and aquatic macrophytes (2024)
Vivaldini, Kelen Cristiane Teixeira ; Pazelli, Tatiana de Figueiredo Pereira Alves Taveira; Rocha, Lidia G. S.; Santos, Igor A. D.; Caldas, Kenny Anderson Queiroz; Soler, Diego Pavan; Benevides, João Roberto Soares; Simplício, Paulo Victor Galvão; Hernandes, André Carmona; Andrade, Kléber de Oliveira; Kim, Pedro H. C.; Alvarez, Isaac G.; Nascimento, Eduardo V.; Santos, Marcela A. A.; Almeida, Aline G.; Cavalcanti, Lucas H. G.; Inoue, Roberto Santos; Terra, Marco Henrique ; Becker, Marcelo
Source: Journal of Intelligent and Robotic Systems. Unidades: EESC, IME
Subjects: ALGAS, FLORAÇÃO, AERONAVES NÃO TRIPULADAS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
VIVALDINI, Kelen Cristiane Teixeira et al. Multi-UAV collaborative system for the identification of surface cyanobacterial blooms and aquatic macrophytes. Journal of Intelligent and Robotic Systems, v. 110, n. 1, p. 1-27, 2024Tradução . . Disponível em: http://dx.doi.org/10.1007/s10846-023-02043-6. Acesso em: 10 jun. 2024.
APA
Vivaldini, K. C. T., Pazelli, T. de F. P. A. T., Rocha, L. G. S., Santos, I. A. D., Caldas, K. A. Q., Soler, D. P., et al. (2024). Multi-UAV collaborative system for the identification of surface cyanobacterial blooms and aquatic macrophytes. Journal of Intelligent and Robotic Systems, 110( 1), 1-27. doi:10.1007/s10846-023-02043-6
NLM
Vivaldini KCT, Pazelli T de FPAT, Rocha LGS, Santos IAD, Caldas KAQ, Soler DP, Benevides JRS, Simplício PVG, Hernandes AC, Andrade K de O, Kim PHC, Alvarez IG, Nascimento EV, Santos MAA, Almeida AG, Cavalcanti LHG, Inoue RS, Terra MH, Becker M. Multi-UAV collaborative system for the identification of surface cyanobacterial blooms and aquatic macrophytes [Internet]. Journal of Intelligent and Robotic Systems. 2024 ; 110( 1): 1-27.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1007/s10846-023-02043-6
Vancouver
Vivaldini KCT, Pazelli T de FPAT, Rocha LGS, Santos IAD, Caldas KAQ, Soler DP, Benevides JRS, Simplício PVG, Hernandes AC, Andrade K de O, Kim PHC, Alvarez IG, Nascimento EV, Santos MAA, Almeida AG, Cavalcanti LHG, Inoue RS, Terra MH, Becker M. Multi-UAV collaborative system for the identification of surface cyanobacterial blooms and aquatic macrophytes [Internet]. Journal of Intelligent and Robotic Systems. 2024 ; 110( 1): 1-27.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1007/s10846-023-02043-6
Artigo de periodico
Cooling of power electronic devices using rectangular flat heat pipes with externally and internally cooled condenser regions (2024)
Rakishith, Bairi Levi; Asirvatham, Lazarus Godson; Angeline, Appadurai Anitha; Raj, Jaya Antony Perinba Selvin; Bose, Jefferson Raja; Princess, P. Joyce Beryl; Gautam, Sneha; Mahian, Omid; Ribatski, Gherhardt ; Wongwises, Somchai
Source: Applied Thermal Engineering. Unidade: EESC
Subjects: ELETRÔNICA DE POTÊNCIA, EVAPORAÇÃO, DISPOSITIVOS ELETRÔNICOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RAKISHITH, Bairi Levi et al. Cooling of power electronic devices using rectangular flat heat pipes with externally and internally cooled condenser regions. Applied Thermal Engineering, v. 236, p. 1-13, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.applthermaleng.2023.121474. Acesso em: 10 jun. 2024.
APA
Rakishith, B. L., Asirvatham, L. G., Angeline, A. A., Raj, J. A. P. S., Bose, J. R., Princess, P. J. B., et al. (2024). Cooling of power electronic devices using rectangular flat heat pipes with externally and internally cooled condenser regions. Applied Thermal Engineering, 236, 1-13. doi:10.1016/j.applthermaleng.2023.121474
NLM
Rakishith BL, Asirvatham LG, Angeline AA, Raj JAPS, Bose JR, Princess PJB, Gautam S, Mahian O, Ribatski G, Wongwises S. Cooling of power electronic devices using rectangular flat heat pipes with externally and internally cooled condenser regions [Internet]. Applied Thermal Engineering. 2024 ; 236 1-13.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1016/j.applthermaleng.2023.121474
Vancouver
Rakishith BL, Asirvatham LG, Angeline AA, Raj JAPS, Bose JR, Princess PJB, Gautam S, Mahian O, Ribatski G, Wongwises S. Cooling of power electronic devices using rectangular flat heat pipes with externally and internally cooled condenser regions [Internet]. Applied Thermal Engineering. 2024 ; 236 1-13.[citado 2024 jun. 10 ] Available from: http://dx.doi.org/10.1016/j.applthermaleng.2023.121474

USP Schools

ReP

Filtros

Document Types

USP Schools

Departament

Authors

USP affiliated authors

Date published

Subjects

Source title

Publisher

Conference titles

Countries/Territories

Grupo de pesquisa

Funding Agencies

Indexado em

Normalized affiliation

Non normalized affiliation

Countries of institutions of collaboration