ReP USP - Resultado da busca

Trabalho de evento
Low-cost Fresnel microlens array fabricated by a home-built maskless lithography system (2012)
Cirino, Giuseppe Antonio; Lopera, S. A.; Montagnoli, A. N.; Gonçalves Neto, Luiz; Mansano, Ronaldo Domingues
Source: Proceedings of SPIE. Conference titles: SPIE Optical Engineering + Applications. Unidades: EESC, EP
Subjects: LENTES, ENGENHARIA ELÉTRICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CIRINO, Giuseppe Antonio et al. Low-cost Fresnel microlens array fabricated by a home-built maskless lithography system. 2012, Anais.. Bellingham, WA, USA: SPIE, 2012. p. 1-7. Disponível em: https://doi.org/10.1117/12.928819. Acesso em: 16 nov. 2025.
APA
Cirino, G. A., Lopera, S. A., Montagnoli, A. N., Gonçalves Neto, L., & Mansano, R. D. (2012). Low-cost Fresnel microlens array fabricated by a home-built maskless lithography system. In Proceedings of SPIE (Vol. 8489, p. 1-7). Bellingham, WA, USA: SPIE. doi:10.1117/12.928819
NLM
Cirino GA, Lopera SA, Montagnoli AN, Gonçalves Neto L, Mansano RD. Low-cost Fresnel microlens array fabricated by a home-built maskless lithography system [Internet]. Proceedings of SPIE. 2012 ; 8489 1-7.[citado 2025 nov. 16 ] Available from: https://doi.org/10.1117/12.928819
Vancouver
Cirino GA, Lopera SA, Montagnoli AN, Gonçalves Neto L, Mansano RD. Low-cost Fresnel microlens array fabricated by a home-built maskless lithography system [Internet]. Proceedings of SPIE. 2012 ; 8489 1-7.[citado 2025 nov. 16 ] Available from: https://doi.org/10.1117/12.928819
Trabalho de evento
Low f-number microlens array fabricated in thick resist (2012)
Cirino, Giuseppe Antonio; Montagnoli, A. N.; Verdonck, Patrick Bernard; Gonçalves Neto, Luiz
Source: Proceedings of SPIE. Conference titles: SPIE Photonics Europe. Unidade: EESC
Subjects: LENTES, ENGENHARIA ELÉTRICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CIRINO, Giuseppe Antonio et al. Low f-number microlens array fabricated in thick resist. 2012, Anais.. Bellingham, WA, USA: SPIE, 2012. p. 1-9. Disponível em: https://doi.org/10.1117/12.914417. Acesso em: 16 nov. 2025.
APA
Cirino, G. A., Montagnoli, A. N., Verdonck, P. B., & Gonçalves Neto, L. (2012). Low f-number microlens array fabricated in thick resist. In Proceedings of SPIE (Vol. 8428, p. 1-9). Bellingham, WA, USA: SPIE. doi:10.1117/12.914417
NLM
Cirino GA, Montagnoli AN, Verdonck PB, Gonçalves Neto L. Low f-number microlens array fabricated in thick resist [Internet]. Proceedings of SPIE. 2012 ; 8428 1-9.[citado 2025 nov. 16 ] Available from: https://doi.org/10.1117/12.914417
Vancouver
Cirino GA, Montagnoli AN, Verdonck PB, Gonçalves Neto L. Low f-number microlens array fabricated in thick resist [Internet]. Proceedings of SPIE. 2012 ; 8428 1-9.[citado 2025 nov. 16 ] Available from: https://doi.org/10.1117/12.914417
Trabalho de evento
Design, fabrication, and characterization of Fresnel lens array with spatial filtering for passive infrared motion sensors (2006)
Cirino, Giuseppe Antonio; Barcellos, Robson; Morato, Spero Penha; Bereczki, Allan; Gonçalves Neto, Luiz
Source: Proceedings of SPIE. Conference titles: Photonics North. Unidade: EESC
Subjects: ENGENHARIA ELÉTRICA, SENSORES ÓPTICOS, FILMES FINOS, LENTES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CIRINO, Giuseppe Antonio et al. Design, fabrication, and characterization of Fresnel lens array with spatial filtering for passive infrared motion sensors. 2006, Anais.. Bellingham, WA, USA: SPIE, 2006. p. 1-12. Disponível em: https://doi.org/10.1117/12.707928. Acesso em: 16 nov. 2025.
APA
Cirino, G. A., Barcellos, R., Morato, S. P., Bereczki, A., & Gonçalves Neto, L. (2006). Design, fabrication, and characterization of Fresnel lens array with spatial filtering for passive infrared motion sensors. In Proceedings of SPIE (Vol. 6343, p. 1-12). Bellingham, WA, USA: SPIE. doi:10.1117/12.707928
NLM
Cirino GA, Barcellos R, Morato SP, Bereczki A, Gonçalves Neto L. Design, fabrication, and characterization of Fresnel lens array with spatial filtering for passive infrared motion sensors [Internet]. Proceedings of SPIE. 2006 ; 6343 1-12.[citado 2025 nov. 16 ] Available from: https://doi.org/10.1117/12.707928
Vancouver
Cirino GA, Barcellos R, Morato SP, Bereczki A, Gonçalves Neto L. Design, fabrication, and characterization of Fresnel lens array with spatial filtering for passive infrared motion sensors [Internet]. Proceedings of SPIE. 2006 ; 6343 1-12.[citado 2025 nov. 16 ] Available from: https://doi.org/10.1117/12.707928
Trabalho de evento-anais periodico
Optical implementation of cubic-phase distribution lenses for passive infrared motion sensors (2004)
Cirino, Giuseppe Antonio; Gonçalves Neto, Luiz; Mansano, Ronaldo Domingues
Source: Proceedings of SPIE. Conference titles: Conferences on Thermosense. Unidades: EESC, EP
Assunto: ÓPTICA ELETRÔNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CIRINO, Giuseppe Antonio e GONÇALVES NETO, Luiz e MANSANO, Ronaldo Domingues. Optical implementation of cubic-phase distribution lenses for passive infrared motion sensors. Proceedings of SPIE. Bellingham, WA: Escola de Engenharia de São Carlos, Universidade de São Paulo. Disponível em: https://repositorio.usp.br/directbitstream/5b005183-895a-4d36-b8e3-1056334ad035/PROD_001771_SYSNO_1390505.pdf. Acesso em: 16 nov. 2025. , 2004
APA
Cirino, G. A., Gonçalves Neto, L., & Mansano, R. D. (2004). Optical implementation of cubic-phase distribution lenses for passive infrared motion sensors. Proceedings of SPIE. Bellingham, WA: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/5b005183-895a-4d36-b8e3-1056334ad035/PROD_001771_SYSNO_1390505.pdf
NLM
Cirino GA, Gonçalves Neto L, Mansano RD. Optical implementation of cubic-phase distribution lenses for passive infrared motion sensors [Internet]. Proceedings of SPIE. 2004 ; 5405 189-198.[citado 2025 nov. 16 ] Available from: https://repositorio.usp.br/directbitstream/5b005183-895a-4d36-b8e3-1056334ad035/PROD_001771_SYSNO_1390505.pdf
Vancouver
Cirino GA, Gonçalves Neto L, Mansano RD. Optical implementation of cubic-phase distribution lenses for passive infrared motion sensors [Internet]. Proceedings of SPIE. 2004 ; 5405 189-198.[citado 2025 nov. 16 ] Available from: https://repositorio.usp.br/directbitstream/5b005183-895a-4d36-b8e3-1056334ad035/PROD_001771_SYSNO_1390505.pdf
Trabalho de evento-anais periodico
Design of continuous full complex modulation proximity printing masks using a quadratic phase distribution (2004)
Gonçalves Neto, Luiz; Cirino, Giuseppe Antonio; Mansano, Ronaldo Domingues ; Verdonck, Patrick Bernard; Seabra, Antonio Carlos
Source: Proceedings of SPIE. Conference titles: Micromachining Technology for Micro-Optics and Nano-Optics II. Unidades: EESC, EP
Subjects: ÓPTICA ELETRÔNICA, MICROELETRÔNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GONÇALVES NETO, Luiz et al. Design of continuous full complex modulation proximity printing masks using a quadratic phase distribution. Proceedings of SPIE. Bellingham, WA: Escola de Engenharia de São Carlos, Universidade de São Paulo. Disponível em: https://repositorio.usp.br/directbitstream/37a16619-40c9-4c77-bb78-7407a2aa30f6/ok1390500.pdf. Acesso em: 16 nov. 2025. , 2004
APA
Gonçalves Neto, L., Cirino, G. A., Mansano, R. D., Verdonck, P. B., & Seabra, A. C. (2004). Design of continuous full complex modulation proximity printing masks using a quadratic phase distribution. Proceedings of SPIE. Bellingham, WA: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/37a16619-40c9-4c77-bb78-7407a2aa30f6/ok1390500.pdf
NLM
Gonçalves Neto L, Cirino GA, Mansano RD, Verdonck PB, Seabra AC. Design of continuous full complex modulation proximity printing masks using a quadratic phase distribution [Internet]. Proceedings of SPIE. 2004 ; 5437 71-78.[citado 2025 nov. 16 ] Available from: https://repositorio.usp.br/directbitstream/37a16619-40c9-4c77-bb78-7407a2aa30f6/ok1390500.pdf
Vancouver
Gonçalves Neto L, Cirino GA, Mansano RD, Verdonck PB, Seabra AC. Design of continuous full complex modulation proximity printing masks using a quadratic phase distribution [Internet]. Proceedings of SPIE. 2004 ; 5437 71-78.[citado 2025 nov. 16 ] Available from: https://repositorio.usp.br/directbitstream/37a16619-40c9-4c77-bb78-7407a2aa30f6/ok1390500.pdf
Trabalho de evento-anais periodico
Hybrid phase and amplitude modulation proximity printing mask fabricated on DLC and 'SIO IND. 2' substrates (2003)
Gonçalves Neto, Luiz; Cirino, Giuseppe Antonio; Mansano, Ronaldo Domingues ; Cardona, Patricia Soares Pinto; Verdonck, Patrick Bernard
Source: Proceedings of SPIE. Conference titles: Micromachining Technology for Micro-Optics and Nano-Optics. Unidades: EESC, EP
Subjects: ÓPTICA ELETRÔNICA, MICROELETRÔNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GONÇALVES NETO, Luiz et al. Hybrid phase and amplitude modulation proximity printing mask fabricated on DLC and 'SIO IND. 2' substrates. Proceedings of SPIE. Bellingham: Escola de Engenharia de São Carlos, Universidade de São Paulo. Disponível em: https://repositorio.usp.br/directbitstream/2788d87c-05ac-46fb-85ec-ead979caa42d/ok1369126.pdf. Acesso em: 16 nov. 2025. , 2003
APA
Gonçalves Neto, L., Cirino, G. A., Mansano, R. D., Cardona, P. S. P., & Verdonck, P. B. (2003). Hybrid phase and amplitude modulation proximity printing mask fabricated on DLC and 'SIO IND. 2' substrates. Proceedings of SPIE. Bellingham: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/2788d87c-05ac-46fb-85ec-ead979caa42d/ok1369126.pdf
NLM
Gonçalves Neto L, Cirino GA, Mansano RD, Cardona PSP, Verdonck PB. Hybrid phase and amplitude modulation proximity printing mask fabricated on DLC and 'SIO IND. 2' substrates [Internet]. Proceedings of SPIE. 2003 ; 4984 18-28.[citado 2025 nov. 16 ] Available from: https://repositorio.usp.br/directbitstream/2788d87c-05ac-46fb-85ec-ead979caa42d/ok1369126.pdf
Vancouver
Gonçalves Neto L, Cirino GA, Mansano RD, Cardona PSP, Verdonck PB. Hybrid phase and amplitude modulation proximity printing mask fabricated on DLC and 'SIO IND. 2' substrates [Internet]. Proceedings of SPIE. 2003 ; 4984 18-28.[citado 2025 nov. 16 ] Available from: https://repositorio.usp.br/directbitstream/2788d87c-05ac-46fb-85ec-ead979caa42d/ok1369126.pdf
Trabalho de evento
Novel full complex-amplitude modulation diffractive optical element (2001)
Gonçalves Neto, Luiz; Cardona, Patrícia Soares Pinto; Cirino, Giuseppe Antonio; Mansano, Ronaldo Domingues ; Verdonck, Patrick Bernard
Source: Proceedings of SPIE. Conference titles: Iberoamerican Meeting on Optics. Unidades: EESC, EP, IF
Subjects: ÓPTICA, ENGENHARIA ELÉTRICA, FEIXES ÓPTICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GONÇALVES NETO, Luiz et al. Novel full complex-amplitude modulation diffractive optical element. 2001, Anais.. Bellingham, WA, USA: SPIE, 2001. p. 61-69. Disponível em: https://doi.org/10.1117/12.437222. Acesso em: 16 nov. 2025.
APA
Gonçalves Neto, L., Cardona, P. S. P., Cirino, G. A., Mansano, R. D., & Verdonck, P. B. (2001). Novel full complex-amplitude modulation diffractive optical element. In Proceedings of SPIE (Vol. 4419, p. 61-69). Bellingham, WA, USA: SPIE. doi:10.1117/12.437222
NLM
Gonçalves Neto L, Cardona PSP, Cirino GA, Mansano RD, Verdonck PB. Novel full complex-amplitude modulation diffractive optical element [Internet]. Proceedings of SPIE. 2001 ; 4419 61-69.[citado 2025 nov. 16 ] Available from: https://doi.org/10.1117/12.437222
Vancouver
Gonçalves Neto L, Cardona PSP, Cirino GA, Mansano RD, Verdonck PB. Novel full complex-amplitude modulation diffractive optical element [Internet]. Proceedings of SPIE. 2001 ; 4419 61-69.[citado 2025 nov. 16 ] Available from: https://doi.org/10.1117/12.437222
Trabalho de evento
Fabrication of microlens arrays and gratings with a Novolak-type polymer (2001)
Cirino, Giuseppe Antonio; Gonçalves Neto, Luiz; Mousinho, Ana Paula; Mansano, Ronaldo Domingues ; Verdonck, Patrick Bernard; Seabra, Antonio Carlos
Source: Proceedings of SPIE. Conference titles: International Symposium on Optical Science and Technology. Unidades: EESC, EP
Subjects: ROBÓTICA, RECONHECIMENTO DE PADRÕES, ENGENHARIA ELÉTRICA, LENTES, SENSORES ÓPTICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CIRINO, Giuseppe Antonio et al. Fabrication of microlens arrays and gratings with a Novolak-type polymer. 2001, Anais.. Bellingham, WA, USA: SPIE, 2001. p. 70-78. Disponível em: https://doi.org/10.1117/12.448161. Acesso em: 16 nov. 2025.
APA
Cirino, G. A., Gonçalves Neto, L., Mousinho, A. P., Mansano, R. D., Verdonck, P. B., & Seabra, A. C. (2001). Fabrication of microlens arrays and gratings with a Novolak-type polymer. In Proceedings of SPIE (Vol. 4437, p. 70-78). Bellingham, WA, USA: SPIE. doi:10.1117/12.448161
NLM
Cirino GA, Gonçalves Neto L, Mousinho AP, Mansano RD, Verdonck PB, Seabra AC. Fabrication of microlens arrays and gratings with a Novolak-type polymer [Internet]. Proceedings of SPIE. 2001 ; 4437 70-78.[citado 2025 nov. 16 ] Available from: https://doi.org/10.1117/12.448161
Vancouver
Cirino GA, Gonçalves Neto L, Mousinho AP, Mansano RD, Verdonck PB, Seabra AC. Fabrication of microlens arrays and gratings with a Novolak-type polymer [Internet]. Proceedings of SPIE. 2001 ; 4437 70-78.[citado 2025 nov. 16 ] Available from: https://doi.org/10.1117/12.448161

USP Schools

ReP

Filtros

Authors

USP affiliated authors

Subjects

Conference titles

Non normalized affiliation