ReP USP - Resultado da busca

Artigo de periodico
Fatigue crack propagation of API 5L X70 steel in a modifed simulated fuel-grade ethanol (MSFGE) environment (2023)
Marcomini, José Benedito; Santos, Elielson Alves dos; Sordi, Vitor Luiz; Giorgetti, Vinicius; Rovere, Carlos Alberto Della; Baptista, Carlos Antonio Reis Pereira; Paes, Marcelo
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidades: EESC, EEL
Subjects: ETANOL, COMBUSTÍVEIS, FADIGA DOS MATERIAIS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARCOMINI, José Benedito et al. Fatigue crack propagation of API 5L X70 steel in a modifed simulated fuel-grade ethanol (MSFGE) environment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 45, p. 1-12, 2023Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-023-04540-z. Acesso em: 14 set. 2024.
APA
Marcomini, J. B., Santos, E. A. dos, Sordi, V. L., Giorgetti, V., Rovere, C. A. D., Baptista, C. A. R. P., & Paes, M. (2023). Fatigue crack propagation of API 5L X70 steel in a modifed simulated fuel-grade ethanol (MSFGE) environment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 1-12. doi:10.1007/s40430-023-04540-z
NLM
Marcomini JB, Santos EA dos, Sordi VL, Giorgetti V, Rovere CAD, Baptista CARP, Paes M. Fatigue crack propagation of API 5L X70 steel in a modifed simulated fuel-grade ethanol (MSFGE) environment [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-12.[citado 2024 set. 14 ] Available from: https://dx.doi.org/10.1007/s40430-023-04540-z
Vancouver
Marcomini JB, Santos EA dos, Sordi VL, Giorgetti V, Rovere CAD, Baptista CARP, Paes M. Fatigue crack propagation of API 5L X70 steel in a modifed simulated fuel-grade ethanol (MSFGE) environment [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-12.[citado 2024 set. 14 ] Available from: https://dx.doi.org/10.1007/s40430-023-04540-z
Artigo de periodico
Study of surface warm shot peening on the fatigue life of a SAE 5160 leaf spring steel (2023)
Ruy, Marcos César; Bose Filho, Waldek Wladimir ; Doel, T. J. A.; Ruchert, Cassius Olívio Figueiredo Terra
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidades: EESC, EEL
Subjects: TRATAMENTO DE SUPERFÍCIES, FADIGA DOS MATERIAIS, TENSÃO RESIDUAL, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RUY, Marcos César et al. Study of surface warm shot peening on the fatigue life of a SAE 5160 leaf spring steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 45, p. 1-11, 2023Tradução . . Disponível em: https://doi.org/10.1007/s40430-023-04404-6. Acesso em: 14 set. 2024.
APA
Ruy, M. C., Bose Filho, W. W., Doel, T. J. A., & Ruchert, C. O. F. T. (2023). Study of surface warm shot peening on the fatigue life of a SAE 5160 leaf spring steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 1-11. doi:10.1007/s40430-023-04404-6
NLM
Ruy MC, Bose Filho WW, Doel TJA, Ruchert COFT. Study of surface warm shot peening on the fatigue life of a SAE 5160 leaf spring steel [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-11.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-023-04404-6
Vancouver
Ruy MC, Bose Filho WW, Doel TJA, Ruchert COFT. Study of surface warm shot peening on the fatigue life of a SAE 5160 leaf spring steel [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-11.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-023-04404-6
Artigo de periodico
Closed‑loop optimization of piezoelectric sensors locations and gains for output feedback active vibration control (2023)
Shigueoka, Augusto H.; Trindade, Marcelo Areias
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Assunto: ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SHIGUEOKA, Augusto H. e TRINDADE, Marcelo Areias. Closed‑loop optimization of piezoelectric sensors locations and gains for output feedback active vibration control. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 45, p. 1-18, 2023Tradução . . Disponível em: https://doi.org/10.1007/s40430-023-04071-7. Acesso em: 14 set. 2024.
APA
Shigueoka, A. H., & Trindade, M. A. (2023). Closed‑loop optimization of piezoelectric sensors locations and gains for output feedback active vibration control. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 1-18. doi:10.1007/s40430-023-04071-7
NLM
Shigueoka AH, Trindade MA. Closed‑loop optimization of piezoelectric sensors locations and gains for output feedback active vibration control [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-18.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-023-04071-7
Vancouver
Shigueoka AH, Trindade MA. Closed‑loop optimization of piezoelectric sensors locations and gains for output feedback active vibration control [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-18.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-023-04071-7
Artigo de periodico
A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil (2022)
Maia, Cristiana Brasil; Silva, Felipe Venâncio Mitkiewicz; Cabezas Gómez, Luben
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: ENERGIA ELÉTRICA, ÁGUA, DESSALINIZAÇÃO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MAIA, Cristiana Brasil e SILVA, Felipe Venâncio Mitkiewicz e CABEZAS GÓMEZ, Luben. A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, p. 1-16, 2022Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03463-5. Acesso em: 14 set. 2024.
APA
Maia, C. B., Silva, F. V. M., & Cabezas Gómez, L. (2022). A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, 1-16. doi:10.1007/s40430-022-03463-5
NLM
Maia CB, Silva FVM, Cabezas Gómez L. A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-16.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-022-03463-5
Vancouver
Maia CB, Silva FVM, Cabezas Gómez L. A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-16.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-022-03463-5
Artigo de periodico
Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment (2022)
Leal, José Eduardo Silveira; Martiniano, Guilherme Antonelli; Bose Filho, Waldek Wladimir ; Craidy, Pedro da Silva; Paes, Marcelo Torres Piza; Ferreira, Daniel Correia Freire; Valdés Arencibia, Rosenda; Franco, Sinésio Domingues
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: HIDROGÊNIO, NANOCOMPOSITOS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LEAL, José Eduardo Silveira et al. Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, p. 1-13, 2022Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03783-6. Acesso em: 14 set. 2024.
APA
Leal, J. E. S., Martiniano, G. A., Bose Filho, W. W., Craidy, P. da S., Paes, M. T. P., Ferreira, D. C. F., et al. (2022). Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, 1-13. doi:10.1007/s40430-022-03783-6
NLM
Leal JES, Martiniano GA, Bose Filho WW, Craidy P da S, Paes MTP, Ferreira DCF, Valdés Arencibia R, Franco SD. Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-13.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-022-03783-6
Vancouver
Leal JES, Martiniano GA, Bose Filho WW, Craidy P da S, Paes MTP, Ferreira DCF, Valdés Arencibia R, Franco SD. Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-13.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-022-03783-6
Artigo de periodico
Feasibility and performance analyses for an active geometry control suspension system for over-actuated vehicle (2022)
Malvezzi, Fernando ; Coelho, Tarcisio Antonio Hess ; Orsino, Renato Maia Matarazzo
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EP
Subjects: DINÂMICA VEICULAR, MECANISMOS, CHASSIS, SUSPENSÃO MECÂNICA, SISTEMAS VEICULARES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MALVEZZI, Fernando e COELHO, Tarcisio Antonio Hess e ORSINO, Renato Maia Matarazzo. Feasibility and performance analyses for an active geometry control suspension system for over-actuated vehicle. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, p. 1-12, 2022Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03448-4. Acesso em: 14 set. 2024.
APA
Malvezzi, F., Coelho, T. A. H., & Orsino, R. M. M. (2022). Feasibility and performance analyses for an active geometry control suspension system for over-actuated vehicle. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, 1-12. doi:10.1007/s40430-022-03448-4
NLM
Malvezzi F, Coelho TAH, Orsino RMM. Feasibility and performance analyses for an active geometry control suspension system for over-actuated vehicle [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-12.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-022-03448-4
Vancouver
Malvezzi F, Coelho TAH, Orsino RMM. Feasibility and performance analyses for an active geometry control suspension system for over-actuated vehicle [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-12.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-022-03448-4
Artigo de periodico
Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system (2022)
Santos, Fernando Neves Quintino dos; Colmanetti, Alex Roger Almeida; Cabezas Gómez, Luben ; Tibiriçá, Cristiano Bigonha
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: REFRIGERAÇÃO, AQUECIMENTO, GERAÇÃO DE ENERGIA ELÉTRICA, TERMOELETRICIDADE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Fernando Neves Quintino dos et al. Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, p. 1-11, 2022Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03791-6. Acesso em: 14 set. 2024.
APA
Santos, F. N. Q. dos, Colmanetti, A. R. A., Cabezas Gómez, L., & Tibiriçá, C. B. (2022). Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, 1-11. doi:10.1007/s40430-022-03791-6
NLM
Santos FNQ dos, Colmanetti ARA, Cabezas Gómez L, Tibiriçá CB. Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-11.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-022-03791-6
Vancouver
Santos FNQ dos, Colmanetti ARA, Cabezas Gómez L, Tibiriçá CB. Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-11.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-022-03791-6
Artigo de periodico
Toward the use of bond graphs for manufacturing control: improving existing models (2022)
Maluf, Arthur Sarro; Sagawa, Juliana Keiko; Tavares Neto, Roberto Fernandes; Silva, Maíra Martins da
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: CONTROLE DA PRODUÇÃO, INDÚSTRIA 4.0, SISTEMAS DINÂMICOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MALUF, Arthur Sarro et al. Toward the use of bond graphs for manufacturing control: improving existing models. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, p. 1-17, 2022Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03827-x. Acesso em: 14 set. 2024.
APA
Maluf, A. S., Sagawa, J. K., Tavares Neto, R. F., & Silva, M. M. da. (2022). Toward the use of bond graphs for manufacturing control: improving existing models. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, 1-17. doi:10.1007/s40430-022-03827-x
NLM
Maluf AS, Sagawa JK, Tavares Neto RF, Silva MM da. Toward the use of bond graphs for manufacturing control: improving existing models [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-17.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-022-03827-x
Vancouver
Maluf AS, Sagawa JK, Tavares Neto RF, Silva MM da. Toward the use of bond graphs for manufacturing control: improving existing models [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-17.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-022-03827-x
Artigo de periodico
Certifcation of linear closed-loop controllers using the v-gap metric and the generalized stability margin (2021)
Okle, Jan; Noppeney, Victor Tamassia; Cunha, Thiago Boaventura
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: CONTROLADORES PROGRAMÁVEIS, SISTEMAS DINÂMICOS, ROBÔS, SISTEMAS DE CONTROLE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OKLE, Jan e NOPPENEY, Victor Tamassia e CUNHA, Thiago Boaventura. Certifcation of linear closed-loop controllers using the v-gap metric and the generalized stability margin. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-10, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03079-1. Acesso em: 14 set. 2024.
APA
Okle, J., Noppeney, V. T., & Cunha, T. B. (2021). Certifcation of linear closed-loop controllers using the v-gap metric and the generalized stability margin. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-10. doi:10.1007/s40430-021-03079-1
NLM
Okle J, Noppeney VT, Cunha TB. Certifcation of linear closed-loop controllers using the v-gap metric and the generalized stability margin [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-10.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-021-03079-1
Vancouver
Okle J, Noppeney VT, Cunha TB. Certifcation of linear closed-loop controllers using the v-gap metric and the generalized stability margin [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-10.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-021-03079-1
Artigo de periodico
Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF) (2021)
Moreira, Tiago Augusto; Duarte, Juliana Pacheco; Nascimento, Francisco Júlio do; Ribatski, Gherhardt
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: TRANSFERÊNCIA DE CALOR, NANOPARTÍCULAS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOREIRA, Tiago Augusto et al. Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF). Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-16, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03035-z. Acesso em: 14 set. 2024.
APA
Moreira, T. A., Duarte, J. P., Nascimento, F. J. do, & Ribatski, G. (2021). Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF). Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-16. doi:10.1007/s40430-021-03035-z
NLM
Moreira TA, Duarte JP, Nascimento FJ do, Ribatski G. Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF) [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-16.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-021-03035-z
Vancouver
Moreira TA, Duarte JP, Nascimento FJ do, Ribatski G. Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF) [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-16.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-021-03035-z
Artigo de periodico
Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions (2021)
Barbosa, Ismael Motta; Alves, Paulo Rodrigues; Silveira, Zilda de Castro
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: TECNOLOGIAS DA SAÚDE, ACIDENTE VASCULAR CEREBRAL, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BARBOSA, Ismael Motta e ALVES, Paulo Rodrigues e SILVEIRA, Zilda de Castro. Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-16, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-02919-4. Acesso em: 14 set. 2024.
APA
Barbosa, I. M., Alves, P. R., & Silveira, Z. de C. (2021). Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-16. doi:10.1007/s40430-021-02919-4
NLM
Barbosa IM, Alves PR, Silveira Z de C. Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-16.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-021-02919-4
Vancouver
Barbosa IM, Alves PR, Silveira Z de C. Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-16.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-021-02919-4
Artigo de periodico
Self‑difusion in nanofuids of nonelongated particles in the dilute limit (2021)
Fariñas Alvariño, Pablo; Saiz Jabardo, José Maria; Cabezas Gómez, Luben
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: NANOPARTÍCULAS, ESCOAMENTO BIFÁSICO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FARIÑAS ALVARIÑO, Pablo e SAIZ JABARDO, José Maria e CABEZAS GÓMEZ, Luben. Self‑difusion in nanofuids of nonelongated particles in the dilute limit. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-18, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03101-6. Acesso em: 14 set. 2024.
APA
Fariñas Alvariño, P., Saiz Jabardo, J. M., & Cabezas Gómez, L. (2021). Self‑difusion in nanofuids of nonelongated particles in the dilute limit. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-18. doi:10.1007/s40430-021-03101-6
NLM
Fariñas Alvariño P, Saiz Jabardo JM, Cabezas Gómez L. Self‑difusion in nanofuids of nonelongated particles in the dilute limit [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-18.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-021-03101-6
Vancouver
Fariñas Alvariño P, Saiz Jabardo JM, Cabezas Gómez L. Self‑difusion in nanofuids of nonelongated particles in the dilute limit [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-18.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-021-03101-6
Artigo de periodico
Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches (2021)
Santos, Artur Valadares de Freitas; Silveira, Zilda de Castro
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: MANUFATURA, TECNOLOGIAS DA SAÚDE, TERCEIRA DIMENSÃO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Artur Valadares de Freitas e SILVEIRA, Zilda de Castro. Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-15, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03184-1. Acesso em: 14 set. 2024.
APA
Santos, A. V. de F., & Silveira, Z. de C. (2021). Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-15. doi:10.1007/s40430-021-03184-1
NLM
Santos AV de F, Silveira Z de C. Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-15.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-021-03184-1
Vancouver
Santos AV de F, Silveira Z de C. Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-15.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-021-03184-1
Artigo de periodico
Cross section modeling of the non-uniform corrosion due to chloride ingress using the positional finite element method (2020)
Ramos, Evérton Souza; Carrazedo, Rogério
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, ESTRUTURAS DE CONCRETO ARMADO, CORROSÃO, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RAMOS, Evérton Souza e CARRAZEDO, Rogério. Cross section modeling of the non-uniform corrosion due to chloride ingress using the positional finite element method. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 42, p. 1-18, 2020Tradução . . Disponível em: https://doi.org/10.1007/s40430-020-02627-5. Acesso em: 14 set. 2024.
APA
Ramos, E. S., & Carrazedo, R. (2020). Cross section modeling of the non-uniform corrosion due to chloride ingress using the positional finite element method. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-18. doi:10.1007/s40430-020-02627-5
NLM
Ramos ES, Carrazedo R. Cross section modeling of the non-uniform corrosion due to chloride ingress using the positional finite element method [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-18.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-020-02627-5
Vancouver
Ramos ES, Carrazedo R. Cross section modeling of the non-uniform corrosion due to chloride ingress using the positional finite element method [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-18.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-020-02627-5
Artigo de periodico
Improved localization in a corn crop row using a rotated laser rangefnder for three-dimensional data acquisition (2020)
Gasparino, Mateus Valverde; Higuti, Vitor Akihiro Hisano; Baquero Velasquez, Andres Eduardo; Becker, Marcelo
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: ROBÔS, AGRICULTURA DE PRECISÃO, PERCEPÇÃO, SENSOR, 3-D VER TERCEIRA DIMENSÃO., ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GASPARINO, Mateus Valverde et al. Improved localization in a corn crop row using a rotated laser rangefnder for three-dimensional data acquisition. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 42, p. 1-10, 2020Tradução . . Disponível em: https://doi.org/10.1007/s40430-020-02673-z. Acesso em: 14 set. 2024.
APA
Gasparino, M. V., Higuti, V. A. H., Baquero Velasquez, A. E., & Becker, M. (2020). Improved localization in a corn crop row using a rotated laser rangefnder for three-dimensional data acquisition. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-10. doi:10.1007/s40430-020-02673-z
NLM
Gasparino MV, Higuti VAH, Baquero Velasquez AE, Becker M. Improved localization in a corn crop row using a rotated laser rangefnder for three-dimensional data acquisition [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-10.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-020-02673-z
Vancouver
Gasparino MV, Higuti VAH, Baquero Velasquez AE, Becker M. Improved localization in a corn crop row using a rotated laser rangefnder for three-dimensional data acquisition [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-10.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-020-02673-z
Artigo de periodico
Finite element modeling and analysis of an atomic force microscope cantilever beam coupled to a piezoceramic base actuator (2018)
Rodrigues, Kleber dos Santos; Trindade, Marcelo Areias
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: MICROSCOPIA DE FORÇA ATÔMICA, MÉTODO DOS ELEMENTOS FINITOS, ATUADORES PIEZELÉTRICOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RODRIGUES, Kleber dos Santos e TRINDADE, Marcelo Areias. Finite element modeling and analysis of an atomic force microscope cantilever beam coupled to a piezoceramic base actuator. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 40, p. 1-13, 2018Tradução . . Disponível em: https://doi.org/10.1007/s40430-018-1347-6. Acesso em: 14 set. 2024.
APA
Rodrigues, K. dos S., & Trindade, M. A. (2018). Finite element modeling and analysis of an atomic force microscope cantilever beam coupled to a piezoceramic base actuator. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40, 1-13. doi:10.1007/s40430-018-1347-6
NLM
Rodrigues K dos S, Trindade MA. Finite element modeling and analysis of an atomic force microscope cantilever beam coupled to a piezoceramic base actuator [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018 ; 40 1-13.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-018-1347-6
Vancouver
Rodrigues K dos S, Trindade MA. Finite element modeling and analysis of an atomic force microscope cantilever beam coupled to a piezoceramic base actuator [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018 ; 40 1-13.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-018-1347-6
Artigo de periodico
Experimental tests of a new assisted tool holder for ultraprecision machining (2018)
Brino, Henrique Roberto de Herdani; Duduch, Jaime Gilberto
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: USINAGEM, PIEZOELETRICIDADE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BRINO, Henrique Roberto de Herdani e DUDUCH, Jaime Gilberto. Experimental tests of a new assisted tool holder for ultraprecision machining. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 40, p. 1-7, 2018Tradução . . Disponível em: https://doi.org/10.1007/s40430-018-1159-8. Acesso em: 14 set. 2024.
APA
Brino, H. R. de H., & Duduch, J. G. (2018). Experimental tests of a new assisted tool holder for ultraprecision machining. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40, 1-7. doi:10.1007/s40430-018-1159-8
NLM
Brino HR de H, Duduch JG. Experimental tests of a new assisted tool holder for ultraprecision machining [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018 ; 40 1-7.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-018-1159-8
Vancouver
Brino HR de H, Duduch JG. Experimental tests of a new assisted tool holder for ultraprecision machining [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018 ; 40 1-7.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-018-1159-8
Artigo de periodico
Nanofluids for heat transfer applications: a review (2018)
Moreira, Tiago Augusto; Moreira, Débora Carneiro; Ribatski, Gherhardt
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: NANOPARTÍCULAS, TRANSFERÊNCIA DE CALOR, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOREIRA, Tiago Augusto e MOREIRA, Débora Carneiro e RIBATSKI, Gherhardt. Nanofluids for heat transfer applications: a review. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 40, p. 1-29, 2018Tradução . . Disponível em: https://doi.org/10.1007/s40430-018-1225-2. Acesso em: 14 set. 2024.
APA
Moreira, T. A., Moreira, D. C., & Ribatski, G. (2018). Nanofluids for heat transfer applications: a review. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40, 1-29. doi:10.1007/s40430-018-1225-2
NLM
Moreira TA, Moreira DC, Ribatski G. Nanofluids for heat transfer applications: a review [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018 ; 40 1-29.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-018-1225-2
Vancouver
Moreira TA, Moreira DC, Ribatski G. Nanofluids for heat transfer applications: a review [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018 ; 40 1-29.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-018-1225-2
Artigo de periodico
Heuristic algorithms for scheduling hybrid flow shops with machine blocking and setup times (2018)
Moccellin, João Vitor; Nagano, Marcelo Seido ; Pitombeira Neto, Anselmo Ramalho; Prata, Bruno de Athayde
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: PROGRAMAÇÃO DA PRODUÇÃO, ALGORITMOS DE SCHEDULING, SISTEMAS DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOCCELLIN, João Vitor et al. Heuristic algorithms for scheduling hybrid flow shops with machine blocking and setup times. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 40, n. 1, 2018Tradução . . Disponível em: https://doi.org/10.1007/s40430-018-0980-4. Acesso em: 14 set. 2024.
APA
Moccellin, J. V., Nagano, M. S., Pitombeira Neto, A. R., & Prata, B. de A. (2018). Heuristic algorithms for scheduling hybrid flow shops with machine blocking and setup times. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40( 1). doi:10.1007/s40430-018-0980-4
NLM
Moccellin JV, Nagano MS, Pitombeira Neto AR, Prata B de A. Heuristic algorithms for scheduling hybrid flow shops with machine blocking and setup times [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018 ; 40( 1):[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-018-0980-4
Vancouver
Moccellin JV, Nagano MS, Pitombeira Neto AR, Prata B de A. Heuristic algorithms for scheduling hybrid flow shops with machine blocking and setup times [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018 ; 40( 1):[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-018-0980-4
Artigo de periodico
Numerical and experimental evaluation of the dynamic performance of kinematically redundant parallel manipulators (2018)
Fontes, João Vitor de Carvalho ; Santos, João Cavalcanti; Silva, Maíra Martins da
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: MANIPULADORES, CINEMÁTICA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FONTES, João Vitor de Carvalho e SANTOS, João Cavalcanti e SILVA, Maíra Martins da. Numerical and experimental evaluation of the dynamic performance of kinematically redundant parallel manipulators. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 40, p. 1-11, 2018Tradução . . Disponível em: https://doi.org/10.1007/s40430-018-1072-1. Acesso em: 14 set. 2024.
APA
Fontes, J. V. de C., Santos, J. C., & Silva, M. M. da. (2018). Numerical and experimental evaluation of the dynamic performance of kinematically redundant parallel manipulators. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40, 1-11. doi:10.1007/s40430-018-1072-1
NLM
Fontes JV de C, Santos JC, Silva MM da. Numerical and experimental evaluation of the dynamic performance of kinematically redundant parallel manipulators [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018 ; 40 1-11.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-018-1072-1
Vancouver
Fontes JV de C, Santos JC, Silva MM da. Numerical and experimental evaluation of the dynamic performance of kinematically redundant parallel manipulators [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018 ; 40 1-11.[citado 2024 set. 14 ] Available from: https://doi.org/10.1007/s40430-018-1072-1

USP Schools

ReP

Filtros

Departament

Authors

USP affiliated authors

Date published

Subjects

Funding Agencies

Indexado em

Non normalized affiliation

Countries of institutions of collaboration