ReP USP - Resultado da busca

Artigo de periodico
Enhanced dissimilar aluminum alloy joints using 0.1 mm offset in refill friction stir spot welding (2025)
Maranho, Jose Francisco Caldeira; Fan, Cui; Huawei, Tang; Xiaosong, Feng; Hao, Luan; Junjun, Shen; Wolf, Witor ; Freitas, Brenda Juliet Martins; Wenya, Li; Alcântara, Nelson Guedes de; Santos, Jorge Fernandez dos; Klusemann, Benjamin; Koga, Guilherme Yuuki
Fonte: Journal of Materials Research and Technology. Unidade: EESC
Assunto: MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARANHO, Jose Francisco Caldeira et al. Enhanced dissimilar aluminum alloy joints using 0.1 mm offset in refill friction stir spot welding. Journal of Materials Research and Technology, v. 36, p. 1091-1104, 2025Tradução . . Disponível em: https://dx.doi.org/10.1016/j.jmrt.2025.03.200. Acesso em: 05 dez. 2025.
APA
Maranho, J. F. C., Fan, C., Huawei, T., Xiaosong, F., Hao, L., Junjun, S., et al. (2025). Enhanced dissimilar aluminum alloy joints using 0.1 mm offset in refill friction stir spot welding. Journal of Materials Research and Technology, 36, 1091-1104. doi:10.1016/j.jmrt.2025.03.200
NLM
Maranho JFC, Fan C, Huawei T, Xiaosong F, Hao L, Junjun S, Wolf W, Freitas BJM, Wenya L, Alcântara NG de, Santos JF dos, Klusemann B, Koga GY. Enhanced dissimilar aluminum alloy joints using 0.1 mm offset in refill friction stir spot welding [Internet]. Journal of Materials Research and Technology. 2025 ; 36 1091-1104.[citado 2025 dez. 05 ] Available from: https://dx.doi.org/10.1016/j.jmrt.2025.03.200
Vancouver
Maranho JFC, Fan C, Huawei T, Xiaosong F, Hao L, Junjun S, Wolf W, Freitas BJM, Wenya L, Alcântara NG de, Santos JF dos, Klusemann B, Koga GY. Enhanced dissimilar aluminum alloy joints using 0.1 mm offset in refill friction stir spot welding [Internet]. Journal of Materials Research and Technology. 2025 ; 36 1091-1104.[citado 2025 dez. 05 ] Available from: https://dx.doi.org/10.1016/j.jmrt.2025.03.200
Artigo de periodico
An experimental investigation of the mechanical properties and failure mode of 3D stitched composites (2024)
Reis, Lucas Moura Montenegro; Ribeiro, Marcelo Leite ; Madureira, Fernando; Morelli, Arnaldo Carlos; Monteiro, Sergio Neves; Arantes, Vera Lúcia
Fonte: Journal of Materials Research and Technology. Unidade: EESC
Assuntos: 3-D VER TERCEIRA DIMENSÃO., TENACIDADE DOS MATERIAIS, MATERIAIS COMPÓSITOS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
REIS, Lucas Moura Montenegro et al. An experimental investigation of the mechanical properties and failure mode of 3D stitched composites. Journal of Materials Research and Technology, v. 29, p. 90-100, 2024Tradução . . Disponível em: https://dx.doi.org/10.1016/j.jmrt.2023.12.283. Acesso em: 05 dez. 2025.
APA
Reis, L. M. M., Ribeiro, M. L., Madureira, F., Morelli, A. C., Monteiro, S. N., & Arantes, V. L. (2024). An experimental investigation of the mechanical properties and failure mode of 3D stitched composites. Journal of Materials Research and Technology, 29, 90-100. doi:10.1016/j.jmrt.2023.12.283
NLM
Reis LMM, Ribeiro ML, Madureira F, Morelli AC, Monteiro SN, Arantes VL. An experimental investigation of the mechanical properties and failure mode of 3D stitched composites [Internet]. Journal of Materials Research and Technology. 2024 ; 29 90-100.[citado 2025 dez. 05 ] Available from: https://dx.doi.org/10.1016/j.jmrt.2023.12.283
Vancouver
Reis LMM, Ribeiro ML, Madureira F, Morelli AC, Monteiro SN, Arantes VL. An experimental investigation of the mechanical properties and failure mode of 3D stitched composites [Internet]. Journal of Materials Research and Technology. 2024 ; 29 90-100.[citado 2025 dez. 05 ] Available from: https://dx.doi.org/10.1016/j.jmrt.2023.12.283
Artigo de periodico
Synthesis and characterization of novel fluorene-based green copolymers and their potential application in organic light-emitting diodes (2024)
Brito, Elisa Barbosa de; Santos, Daniela Corrêa; Paula, Taihana Parente de; Morais, Andreia de; Freitas, Jilian Nei de ; Valaski, Rogério; Marques, Maria de Fátima Vieira; Cocca, Leandro Henrique Zucolotto ; Pelosi, André Gasparotto ; De Boni, Leonardo ; Monteiro, Sergio Neves
Fonte: Journal of Materials Research and Technology. Unidade: IFSC
Assuntos: BIOMATERIAIS, DIODOS, POLÍMEROS (MATERIAIS), LUMINESCÊNCIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BRITO, Elisa Barbosa de et al. Synthesis and characterization of novel fluorene-based green copolymers and their potential application in organic light-emitting diodes. Journal of Materials Research and Technology, v. 28, n. Ja- Feb. 2024, p. 4317-4333 + supplementary data, 2024Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2023.12.249. Acesso em: 05 dez. 2025.
APA
Brito, E. B. de, Santos, D. C., Paula, T. P. de, Morais, A. de, Freitas, J. N. de, Valaski, R., et al. (2024). Synthesis and characterization of novel fluorene-based green copolymers and their potential application in organic light-emitting diodes. Journal of Materials Research and Technology, 28( Ja- Feb. 2024), 4317-4333 + supplementary data. doi:10.1016/j.jmrt.2023.12.249
NLM
Brito EB de, Santos DC, Paula TP de, Morais A de, Freitas JN de, Valaski R, Marques M de FV, Cocca LHZ, Pelosi AG, De Boni L, Monteiro SN. Synthesis and characterization of novel fluorene-based green copolymers and their potential application in organic light-emitting diodes [Internet]. Journal of Materials Research and Technology. 2024 ; 28( Ja- Feb. 2024): 4317-4333 + supplementary data.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2023.12.249
Vancouver
Brito EB de, Santos DC, Paula TP de, Morais A de, Freitas JN de, Valaski R, Marques M de FV, Cocca LHZ, Pelosi AG, De Boni L, Monteiro SN. Synthesis and characterization of novel fluorene-based green copolymers and their potential application in organic light-emitting diodes [Internet]. Journal of Materials Research and Technology. 2024 ; 28( Ja- Feb. 2024): 4317-4333 + supplementary data.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2023.12.249
Artigo de periodico
Corrosion behavior of 316L stainless steel reinforced by dispersed yttria stabilized zirconia fabricated by spark plasma sintering (2024)
Soares, Lucas de Figueiredo ; Brito Neto, Francisco Maciel de ; Reis, Lucas Moura Montenegro; Vacchi, Guilherme dos Santos; Monteiro, Sergio Neves; Rovere, Carlos Alberto Della; Arantes, Vera Lúcia
Fonte: Journal of Materials Research and Technology. Unidade: EESC
Assuntos: AÇO INOXIDÁVEL, ZIRCÔNIA, SINTERIZAÇÃO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOARES, Lucas de Figueiredo et al. Corrosion behavior of 316L stainless steel reinforced by dispersed yttria stabilized zirconia fabricated by spark plasma sintering. Journal of Materials Research and Technology, v. 33, p. 2303-2314, 2024Tradução . . Disponível em: https://dx.doi.org/10.1016/j.jmrt.2024.09.214. Acesso em: 05 dez. 2025.
APA
Soares, L. de F., Brito Neto, F. M. de, Reis, L. M. M., Vacchi, G. dos S., Monteiro, S. N., Rovere, C. A. D., & Arantes, V. L. (2024). Corrosion behavior of 316L stainless steel reinforced by dispersed yttria stabilized zirconia fabricated by spark plasma sintering. Journal of Materials Research and Technology, 33, 2303-2314. doi:10.1016/j.jmrt.2024.09.214
NLM
Soares L de F, Brito Neto FM de, Reis LMM, Vacchi G dos S, Monteiro SN, Rovere CAD, Arantes VL. Corrosion behavior of 316L stainless steel reinforced by dispersed yttria stabilized zirconia fabricated by spark plasma sintering [Internet]. Journal of Materials Research and Technology. 2024 ; 33 2303-2314.[citado 2025 dez. 05 ] Available from: https://dx.doi.org/10.1016/j.jmrt.2024.09.214
Vancouver
Soares L de F, Brito Neto FM de, Reis LMM, Vacchi G dos S, Monteiro SN, Rovere CAD, Arantes VL. Corrosion behavior of 316L stainless steel reinforced by dispersed yttria stabilized zirconia fabricated by spark plasma sintering [Internet]. Journal of Materials Research and Technology. 2024 ; 33 2303-2314.[citado 2025 dez. 05 ] Available from: https://dx.doi.org/10.1016/j.jmrt.2024.09.214
Artigo de periodico
Effect of building direction and heat treatment on the wear behavior of H13 tool steel processed by laser powder bed fusion (2024)
Oliveira, Adriel P; Ferreira, Tales; Coelho, Reginaldo Teixeira ; Bolfarini, Claudemiro; Gargarella, Piter
Fonte: Journal of Materials Research and Technology. Unidade: EESC
Assuntos: AÇO, FERRAMENTAS, LEITE EM PÓ, RESISTÊNCIA DOS MATERIAIS, DESGASTE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Adriel P et al. Effect of building direction and heat treatment on the wear behavior of H13 tool steel processed by laser powder bed fusion. Journal of Materials Research and Technology, v. no 1, p. 9802-9810, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.jmrt.2024.12.012. Acesso em: 05 dez. 2025.
APA
Oliveira, A. P., Ferreira, T., Coelho, R. T., Bolfarini, C., & Gargarella, P. (2024). Effect of building direction and heat treatment on the wear behavior of H13 tool steel processed by laser powder bed fusion. Journal of Materials Research and Technology, no 1, 9802-9810. doi:10.1016/j.jmrt.2024.12.012
NLM
Oliveira AP, Ferreira T, Coelho RT, Bolfarini C, Gargarella P. Effect of building direction and heat treatment on the wear behavior of H13 tool steel processed by laser powder bed fusion [Internet]. Journal of Materials Research and Technology. 2024 ; no 1 9802-9810.[citado 2025 dez. 05 ] Available from: http://dx.doi.org/10.1016/j.jmrt.2024.12.012
Vancouver
Oliveira AP, Ferreira T, Coelho RT, Bolfarini C, Gargarella P. Effect of building direction and heat treatment on the wear behavior of H13 tool steel processed by laser powder bed fusion [Internet]. Journal of Materials Research and Technology. 2024 ; no 1 9802-9810.[citado 2025 dez. 05 ] Available from: http://dx.doi.org/10.1016/j.jmrt.2024.12.012
Artigo de periodico
Adherence of Brazilian dimension stones by mortar adhesion: influence of temperature (2023)
Ribeiro, Rogério Pinto ; Sichieri, Eduvaldo Paulo ; Alves, Daniela Tomaz; Xavier, Gustavo de Castro ; Azevedo, Afonso R.G. de; Monteiro, Sergio N
Fonte: Journal of Materials Research and Technology. Unidades: IAU, EESC
Assuntos: ROCHAS ORNAMENTAIS, ARGAMASSA, GRANITO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Rogério Pinto et al. Adherence of Brazilian dimension stones by mortar adhesion: influence of temperature. Journal of Materials Research and Technology, v. 24, p. 8547-8557, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2023.05.042. Acesso em: 05 dez. 2025.
APA
Ribeiro, R. P., Sichieri, E. P., Alves, D. T., Xavier, G. de C., Azevedo, A. R. G. de, & Monteiro, S. N. (2023). Adherence of Brazilian dimension stones by mortar adhesion: influence of temperature. Journal of Materials Research and Technology, 24, 8547-8557. doi:10.1016/j.jmrt.2023.05.042
NLM
Ribeiro RP, Sichieri EP, Alves DT, Xavier G de C, Azevedo ARG de, Monteiro SN. Adherence of Brazilian dimension stones by mortar adhesion: influence of temperature [Internet]. Journal of Materials Research and Technology. 2023 ; 24 8547-8557.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2023.05.042
Vancouver
Ribeiro RP, Sichieri EP, Alves DT, Xavier G de C, Azevedo ARG de, Monteiro SN. Adherence of Brazilian dimension stones by mortar adhesion: influence of temperature [Internet]. Journal of Materials Research and Technology. 2023 ; 24 8547-8557.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2023.05.042
Artigo de periodico
Partially reduced graphene oxide produced by glucose in alkaline conditions using probe sonication: the role of the base in reduction (2023)
Teixeira, Jean Valdir Uchôa; Pimentel, Gabriel Junior Cavalcante; Santos, Adriana Alencar; Dias, Leonardo Francisco Gonçalves; Mastelaro, Valmor Roberto ; Lisboa-Filho, Paulo Noronha
Fonte: Journal of Materials Research and Technology. Unidade: IFSC
Assuntos: NANOCOMPOSITOS, FOTOCATÁLISE, NANOPARTÍCULAS, MATERIAIS NANOESTRUTURADOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TEIXEIRA, Jean Valdir Uchôa et al. Partially reduced graphene oxide produced by glucose in alkaline conditions using probe sonication: the role of the base in reduction. Journal of Materials Research and Technology, v. 26, p. 1785-1797, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2023.07.211. Acesso em: 05 dez. 2025.
APA
Teixeira, J. V. U., Pimentel, G. J. C., Santos, A. A., Dias, L. F. G., Mastelaro, V. R., & Lisboa-Filho, P. N. (2023). Partially reduced graphene oxide produced by glucose in alkaline conditions using probe sonication: the role of the base in reduction. Journal of Materials Research and Technology, 26, 1785-1797. doi:10.1016/j.jmrt.2023.07.211
NLM
Teixeira JVU, Pimentel GJC, Santos AA, Dias LFG, Mastelaro VR, Lisboa-Filho PN. Partially reduced graphene oxide produced by glucose in alkaline conditions using probe sonication: the role of the base in reduction [Internet]. Journal of Materials Research and Technology. 2023 ; 26 1785-1797.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2023.07.211
Vancouver
Teixeira JVU, Pimentel GJC, Santos AA, Dias LFG, Mastelaro VR, Lisboa-Filho PN. Partially reduced graphene oxide produced by glucose in alkaline conditions using probe sonication: the role of the base in reduction [Internet]. Journal of Materials Research and Technology. 2023 ; 26 1785-1797.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2023.07.211
Artigo de periodico
Adherence of Brazilian dimension stones by mortar adhesion: influence of temperature (2023)
Ribeiro, Rogério Pinto ; Sichieri, Eduvaldo Paulo ; Alves, Daniela Tomaz; Xavier, Gustavo de Castro; Azevedo, Afonso R. G. de; Monteiro, Sergio N
Fonte: Journal of Materials Research and Technology. Unidades: EESC, IAU
Assuntos: GRANITO, ARGAMASSA, GEOTECNIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Rogério Pinto et al. Adherence of Brazilian dimension stones by mortar adhesion: influence of temperature. Journal of Materials Research and Technology, v. 24, p. 8547-8557, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2023.05.042. Acesso em: 05 dez. 2025.
APA
Ribeiro, R. P., Sichieri, E. P., Alves, D. T., Xavier, G. de C., Azevedo, A. R. G. de, & Monteiro, S. N. (2023). Adherence of Brazilian dimension stones by mortar adhesion: influence of temperature. Journal of Materials Research and Technology, 24, 8547-8557. doi:10.1016/j.jmrt.2023.05.042
NLM
Ribeiro RP, Sichieri EP, Alves DT, Xavier G de C, Azevedo ARG de, Monteiro SN. Adherence of Brazilian dimension stones by mortar adhesion: influence of temperature [Internet]. Journal of Materials Research and Technology. 2023 ; 24 8547-8557.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2023.05.042
Vancouver
Ribeiro RP, Sichieri EP, Alves DT, Xavier G de C, Azevedo ARG de, Monteiro SN. Adherence of Brazilian dimension stones by mortar adhesion: influence of temperature [Internet]. Journal of Materials Research and Technology. 2023 ; 24 8547-8557.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2023.05.042
Artigo de periodico
Ferritic layers formation mechanism during oxidation of FeMnSiCrNi alloys: Effect of temperature and influence on oxidation behavior (2023)
Passos, João Gabriel da Cruz; Freitas, Bruno Xavier de; Silva, Rodrigo da; Della Rovere, Carlos Alberto; Magnabosco, Rodrigo ; Oliveira, Marcelo Falcão de ; Malafaia, Artur Mariano de Sousa
Fonte: Journal of Materials Research and Technology. Unidade: EESC
Assuntos: OXIDAÇÃO, MUDANÇA DE FASE, LIGAS METÁLICAS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PASSOS, João Gabriel da Cruz et al. Ferritic layers formation mechanism during oxidation of FeMnSiCrNi alloys: Effect of temperature and influence on oxidation behavior. Journal of Materials Research and Technology, v. 27, p. 1281-1292, 2023Tradução . . Disponível em: http://dx.doi.org/10.1016/j.jmrt.2023.10.026. Acesso em: 05 dez. 2025.
APA
Passos, J. G. da C., Freitas, B. X. de, Silva, R. da, Della Rovere, C. A., Magnabosco, R., Oliveira, M. F. de, & Malafaia, A. M. de S. (2023). Ferritic layers formation mechanism during oxidation of FeMnSiCrNi alloys: Effect of temperature and influence on oxidation behavior. Journal of Materials Research and Technology, 27, 1281-1292. doi:10.1016/j.jmrt.2023.10.026
NLM
Passos JG da C, Freitas BX de, Silva R da, Della Rovere CA, Magnabosco R, Oliveira MF de, Malafaia AM de S. Ferritic layers formation mechanism during oxidation of FeMnSiCrNi alloys: Effect of temperature and influence on oxidation behavior [Internet]. Journal of Materials Research and Technology. 2023 ; 27 1281-1292.[citado 2025 dez. 05 ] Available from: http://dx.doi.org/10.1016/j.jmrt.2023.10.026
Vancouver
Passos JG da C, Freitas BX de, Silva R da, Della Rovere CA, Magnabosco R, Oliveira MF de, Malafaia AM de S. Ferritic layers formation mechanism during oxidation of FeMnSiCrNi alloys: Effect of temperature and influence on oxidation behavior [Internet]. Journal of Materials Research and Technology. 2023 ; 27 1281-1292.[citado 2025 dez. 05 ] Available from: http://dx.doi.org/10.1016/j.jmrt.2023.10.026
Artigo de periodico
Simple and low-cost transition metal-free borophosphate glass catalyst for aromatic alcohol oxidation by sodium hypochlorite (2022)
Lenz, Guilherme Felipe; Selinger, Bruno Henrique; Sequinel, Rodrigo; Silva, Fabiano Rosa da; Manzani, Danilo ; Felix, Jorlandio Francisco; Schneider, Ricardo
Fonte: Journal of Materials Research and Technology. Unidade: IQSC
Assuntos: OXIDAÇÃO, QUÍMICA ORGÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LENZ, Guilherme Felipe et al. Simple and low-cost transition metal-free borophosphate glass catalyst for aromatic alcohol oxidation by sodium hypochlorite. Journal of Materials Research and Technology, v. 19, p. 1457-1471, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2022.05.105. Acesso em: 05 dez. 2025.
APA
Lenz, G. F., Selinger, B. H., Sequinel, R., Silva, F. R. da, Manzani, D., Felix, J. F., & Schneider, R. (2022). Simple and low-cost transition metal-free borophosphate glass catalyst for aromatic alcohol oxidation by sodium hypochlorite. Journal of Materials Research and Technology, 19, 1457-1471. doi:10.1016/j.jmrt.2022.05.105
NLM
Lenz GF, Selinger BH, Sequinel R, Silva FR da, Manzani D, Felix JF, Schneider R. Simple and low-cost transition metal-free borophosphate glass catalyst for aromatic alcohol oxidation by sodium hypochlorite [Internet]. Journal of Materials Research and Technology. 2022 ; 19 1457-1471.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2022.05.105
Vancouver
Lenz GF, Selinger BH, Sequinel R, Silva FR da, Manzani D, Felix JF, Schneider R. Simple and low-cost transition metal-free borophosphate glass catalyst for aromatic alcohol oxidation by sodium hypochlorite [Internet]. Journal of Materials Research and Technology. 2022 ; 19 1457-1471.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2022.05.105
Artigo de periodico
Numerical modeling for adjustment of the equivalent moduli of elasticity of OSB layers estimated from experimental flexural rigidity (2021)
Soriano, Julio; Fiorelli, Juliano ; Lopes Junior, Wanley Eduardo; Barbirato, Guilherme Henrique Ament ; Deldotti, Leonardo R.
Fonte: Journal of Materials Research and Technology. Unidade: FZEA
Assuntos: MADEIRA, MATERIAIS COMPÓSITOS, RESINAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SORIANO, Julio et al. Numerical modeling for adjustment of the equivalent moduli of elasticity of OSB layers estimated from experimental flexural rigidity. Journal of Materials Research and Technology, v. 14, p. 1630-1643, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2021.07.048. Acesso em: 05 dez. 2025.
APA
Soriano, J., Fiorelli, J., Lopes Junior, W. E., Barbirato, G. H. A., & Deldotti, L. R. (2021). Numerical modeling for adjustment of the equivalent moduli of elasticity of OSB layers estimated from experimental flexural rigidity. Journal of Materials Research and Technology, 14, 1630-1643. doi:10.1016/j.jmrt.2021.07.048
NLM
Soriano J, Fiorelli J, Lopes Junior WE, Barbirato GHA, Deldotti LR. Numerical modeling for adjustment of the equivalent moduli of elasticity of OSB layers estimated from experimental flexural rigidity [Internet]. Journal of Materials Research and Technology. 2021 ; 14 1630-1643.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2021.07.048
Vancouver
Soriano J, Fiorelli J, Lopes Junior WE, Barbirato GHA, Deldotti LR. Numerical modeling for adjustment of the equivalent moduli of elasticity of OSB layers estimated from experimental flexural rigidity [Internet]. Journal of Materials Research and Technology. 2021 ; 14 1630-1643.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2021.07.048
Artigo de periodico
Controlled formation of metallic tellurium nanocrystals in tellurite glasses using femtosecond direct laser writing (2021)
Capelo, Renato Grigolon; Almeida, Juliana Mara Pinto de ; Franco, Douglas F. ; Poirier, Gael Yves ; Mendonça, Cleber Renato ; Nalin, Marcelo ; Manzani, Danilo
Fonte: Journal of Materials Research and Technology. Unidades: IFSC, IQSC, EESC
Assunto: FOTÔNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAPELO, Renato Grigolon et al. Controlled formation of metallic tellurium nanocrystals in tellurite glasses using femtosecond direct laser writing. Journal of Materials Research and Technology, v. 13, p. 1296-1304, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2021.05.037. Acesso em: 05 dez. 2025.
APA
Capelo, R. G., Almeida, J. M. P. de, Franco, D. F., Poirier, G. Y., Mendonça, C. R., Nalin, M., & Manzani, D. (2021). Controlled formation of metallic tellurium nanocrystals in tellurite glasses using femtosecond direct laser writing. Journal of Materials Research and Technology, 13, 1296-1304. doi:10.1016/j.jmrt.2021.05.037
NLM
Capelo RG, Almeida JMP de, Franco DF, Poirier GY, Mendonça CR, Nalin M, Manzani D. Controlled formation of metallic tellurium nanocrystals in tellurite glasses using femtosecond direct laser writing [Internet]. Journal of Materials Research and Technology. 2021 ; 13 1296-1304.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2021.05.037
Vancouver
Capelo RG, Almeida JMP de, Franco DF, Poirier GY, Mendonça CR, Nalin M, Manzani D. Controlled formation of metallic tellurium nanocrystals in tellurite glasses using femtosecond direct laser writing [Internet]. Journal of Materials Research and Technology. 2021 ; 13 1296-1304.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2021.05.037
Artigo de periodico
Reducible oxide and allotropic transition induced by hydrogen annealing: synthesis routes of TiO2 thin films to tailor optical response (2021)
Echeverrigaray, F. G.; Zanatta, Antonio Ricardo ; Alvarez, F.
Fonte: Journal of Materials Research and Technology. Unidade: IFSC
Assuntos: FILMES FINOS, HIDROGENAÇÃO, TITÂNIO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ECHEVERRIGARAY, F. G. e ZANATTA, Antonio Ricardo e ALVAREZ, F. Reducible oxide and allotropic transition induced by hydrogen annealing: synthesis routes of TiO2 thin films to tailor optical response. Journal of Materials Research and Technology, v. 12, p. 1623-1637 + supplementary data: 1-10, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2021.03.082. Acesso em: 05 dez. 2025.
APA
Echeverrigaray, F. G., Zanatta, A. R., & Alvarez, F. (2021). Reducible oxide and allotropic transition induced by hydrogen annealing: synthesis routes of TiO2 thin films to tailor optical response. Journal of Materials Research and Technology, 12, 1623-1637 + supplementary data: 1-10. doi:10.1016/j.jmrt.2021.03.082
NLM
Echeverrigaray FG, Zanatta AR, Alvarez F. Reducible oxide and allotropic transition induced by hydrogen annealing: synthesis routes of TiO2 thin films to tailor optical response [Internet]. Journal of Materials Research and Technology. 2021 ; 12 1623-1637 + supplementary data: 1-10.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2021.03.082
Vancouver
Echeverrigaray FG, Zanatta AR, Alvarez F. Reducible oxide and allotropic transition induced by hydrogen annealing: synthesis routes of TiO2 thin films to tailor optical response [Internet]. Journal of Materials Research and Technology. 2021 ; 12 1623-1637 + supplementary data: 1-10.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2021.03.082
Artigo de periodico
Surface studies of the chemical environment in gold nanorods supported by X-ray photoelectron spectroscopy (XPS) and ab initio calculations (2021)
Oliveira, Camila; Silva, Antonio Ferreira da; Chubaci, José Fernando Diniz
Fonte: Journal of Materials Research and Technology. Unidade: IF
Assunto: ESPECTROSCOPIA DE RAIO X
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Camila e SILVA, Antonio Ferreira da e CHUBACI, José Fernando Diniz. Surface studies of the chemical environment in gold nanorods supported by X-ray photoelectron spectroscopy (XPS) and ab initio calculations. Journal of Materials Research and Technology, v. 15, p. 768-776, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2021.08.059. Acesso em: 05 dez. 2025.
APA
Oliveira, C., Silva, A. F. da, & Chubaci, J. F. D. (2021). Surface studies of the chemical environment in gold nanorods supported by X-ray photoelectron spectroscopy (XPS) and ab initio calculations. Journal of Materials Research and Technology, 15, 768-776. doi:10.1016/j.jmrt.2021.08.059
NLM
Oliveira C, Silva AF da, Chubaci JFD. Surface studies of the chemical environment in gold nanorods supported by X-ray photoelectron spectroscopy (XPS) and ab initio calculations [Internet]. Journal of Materials Research and Technology. 2021 ; 15 768-776.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2021.08.059
Vancouver
Oliveira C, Silva AF da, Chubaci JFD. Surface studies of the chemical environment in gold nanorods supported by X-ray photoelectron spectroscopy (XPS) and ab initio calculations [Internet]. Journal of Materials Research and Technology. 2021 ; 15 768-776.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2021.08.059
Artigo de periodico
Relationship between microstructure, phase transformation, and mechanical behavior in Ti-40Ta alloys for biomedical applications (2021)
Patricio, Marco Antonio Tito ; Lustosa, C. J. R.; Chaves, J. A. M.; Marques, P. W. B.; Silva Junior, P. S.; Almeida, A.; Vilar, R.; Florêncio, Odila
Fonte: Journal of Materials Research and Technology. Unidade: IFSC
Assuntos: BIOMATERIAIS, TRATAMENTO TÉRMICO, TITÂNIO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PATRICIO, Marco Antonio Tito et al. Relationship between microstructure, phase transformation, and mechanical behavior in Ti-40Ta alloys for biomedical applications. Journal of Materials Research and Technology, v. 14, p. 210-219, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2021.06.038. Acesso em: 05 dez. 2025.
APA
Patricio, M. A. T., Lustosa, C. J. R., Chaves, J. A. M., Marques, P. W. B., Silva Junior, P. S., Almeida, A., et al. (2021). Relationship between microstructure, phase transformation, and mechanical behavior in Ti-40Ta alloys for biomedical applications. Journal of Materials Research and Technology, 14, 210-219. doi:10.1016/j.jmrt.2021.06.038
NLM
Patricio MAT, Lustosa CJR, Chaves JAM, Marques PWB, Silva Junior PS, Almeida A, Vilar R, Florêncio O. Relationship between microstructure, phase transformation, and mechanical behavior in Ti-40Ta alloys for biomedical applications [Internet]. Journal of Materials Research and Technology. 2021 ; 14 210-219.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2021.06.038
Vancouver
Patricio MAT, Lustosa CJR, Chaves JAM, Marques PWB, Silva Junior PS, Almeida A, Vilar R, Florêncio O. Relationship between microstructure, phase transformation, and mechanical behavior in Ti-40Ta alloys for biomedical applications [Internet]. Journal of Materials Research and Technology. 2021 ; 14 210-219.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2021.06.038
Artigo de periodico
Fundamental studies of magneto-optical borogermanate glasses and derived optical fibers containing Tb3+ (2021)
Franco, Douglas Faza; Fernandes, Roger Gomes ; Felix, Jorlandio F.; Mastelaro, Valmor Roberto ; Eckert, Hellmut ; Afonso, Conrado R. M.; Messaddeq, Younes ; Messaddeq, Sandra; Morency, Steeve; Nalin, Marcelo
Fonte: Journal of Materials Research and Technology. Unidade: IFSC
Assuntos: NANOCOMPOSITOS, VIDRO CERÂMICO, NANOPARTÍCULAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FRANCO, Douglas Faza et al. Fundamental studies of magneto-optical borogermanate glasses and derived optical fibers containing Tb3+. Journal of Materials Research and Technology, v. 11, p. 312-327, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2021.01.010. Acesso em: 05 dez. 2025.
APA
Franco, D. F., Fernandes, R. G., Felix, J. F., Mastelaro, V. R., Eckert, H., Afonso, C. R. M., et al. (2021). Fundamental studies of magneto-optical borogermanate glasses and derived optical fibers containing Tb3+. Journal of Materials Research and Technology, 11, 312-327. doi:10.1016/j.jmrt.2021.01.010
NLM
Franco DF, Fernandes RG, Felix JF, Mastelaro VR, Eckert H, Afonso CRM, Messaddeq Y, Messaddeq S, Morency S, Nalin M. Fundamental studies of magneto-optical borogermanate glasses and derived optical fibers containing Tb3+ [Internet]. Journal of Materials Research and Technology. 2021 ; 11 312-327.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2021.01.010
Vancouver
Franco DF, Fernandes RG, Felix JF, Mastelaro VR, Eckert H, Afonso CRM, Messaddeq Y, Messaddeq S, Morency S, Nalin M. Fundamental studies of magneto-optical borogermanate glasses and derived optical fibers containing Tb3+ [Internet]. Journal of Materials Research and Technology. 2021 ; 11 312-327.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2021.01.010
Artigo de periodico
On the relationship between the Raman scattering features and the Ti-related chemical states of TixOyNz films (2021)
Zanatta, Antonio Ricardo ; Cemin, F.; Echeverrigaray, F. G.; Alvarez, F.
Fonte: Journal of Materials Research and Technology. Unidade: IFSC
Assuntos: FILMES FINOS, TITÂNIO, ESPECTROSCOPIA RAMAN
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ZANATTA, Antonio Ricardo et al. On the relationship between the Raman scattering features and the Ti-related chemical states of TixOyNz films. Journal of Materials Research and Technology, v. 14, p. 864-870, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2021.06.090. Acesso em: 05 dez. 2025.
APA
Zanatta, A. R., Cemin, F., Echeverrigaray, F. G., & Alvarez, F. (2021). On the relationship between the Raman scattering features and the Ti-related chemical states of TixOyNz films. Journal of Materials Research and Technology, 14, 864-870. doi:10.1016/j.jmrt.2021.06.090
NLM
Zanatta AR, Cemin F, Echeverrigaray FG, Alvarez F. On the relationship between the Raman scattering features and the Ti-related chemical states of TixOyNz films [Internet]. Journal of Materials Research and Technology. 2021 ; 14 864-870.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2021.06.090
Vancouver
Zanatta AR, Cemin F, Echeverrigaray FG, Alvarez F. On the relationship between the Raman scattering features and the Ti-related chemical states of TixOyNz films [Internet]. Journal of Materials Research and Technology. 2021 ; 14 864-870.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2021.06.090
Artigo de periodico
Effect of microstructure and defect formation on the bending properties of additive manufactured H13 tool steel (2021)
Oliveira, Adriel P.; Lima, Luiz H. Q. R.; Felipe, Bianca C. A.; Bolfarini, Claudemiro; Coelho, Reginaldo Teixeira ; Gargarella, Piter
Fonte: Journal of Materials Research and Technology. Unidade: EESC
Assuntos: TENACIDADE DOS MATERIAIS, MANUFATURA, TERCEIRA DIMENSÃO, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Adriel P. et al. Effect of microstructure and defect formation on the bending properties of additive manufactured H13 tool steel. Journal of Materials Research and Technology, v. 15, p. 3598-3506, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2021.10.011. Acesso em: 05 dez. 2025.
APA
Oliveira, A. P., Lima, L. H. Q. R., Felipe, B. C. A., Bolfarini, C., Coelho, R. T., & Gargarella, P. (2021). Effect of microstructure and defect formation on the bending properties of additive manufactured H13 tool steel. Journal of Materials Research and Technology, 15, 3598-3506. doi:10.1016/j.jmrt.2021.10.011
NLM
Oliveira AP, Lima LHQR, Felipe BCA, Bolfarini C, Coelho RT, Gargarella P. Effect of microstructure and defect formation on the bending properties of additive manufactured H13 tool steel [Internet]. Journal of Materials Research and Technology. 2021 ; 15 3598-3506.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2021.10.011
Vancouver
Oliveira AP, Lima LHQR, Felipe BCA, Bolfarini C, Coelho RT, Gargarella P. Effect of microstructure and defect formation on the bending properties of additive manufactured H13 tool steel [Internet]. Journal of Materials Research and Technology. 2021 ; 15 3598-3506.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2021.10.011
Artigo de periodico
Effect of MAG welding transfer mode on sigma phase precipitation and corrosion performance of 316L stainless steel multi-pass welds (2020)
Guilherme, L. H.; Benedetti, A V; Fugivara , C. S; Magnabosco, Rodrigo ; Oliveira, Marcelo Falcão de
Fonte: Journal of Materials Research and Technology. Unidade: EESC
Assuntos: AÇO INOXIDÁVEL, TROCADORES DE CALOR, CORROSÃO, SOLDAGEM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GUILHERME, L. H. et al. Effect of MAG welding transfer mode on sigma phase precipitation and corrosion performance of 316L stainless steel multi-pass welds. Journal of Materials Research and Technology, v. 9, n. 5, p. se/oct. 2020, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2020.07.039. Acesso em: 05 dez. 2025.
APA
Guilherme, L. H., Benedetti, A. V., Fugivara , C. S., Magnabosco, R., & Oliveira, M. F. de. (2020). Effect of MAG welding transfer mode on sigma phase precipitation and corrosion performance of 316L stainless steel multi-pass welds. Journal of Materials Research and Technology, 9( 5), se/oct. 2020. doi:10.1016/j.jmrt.2020.07.039
NLM
Guilherme LH, Benedetti AV, Fugivara CS, Magnabosco R, Oliveira MF de. Effect of MAG welding transfer mode on sigma phase precipitation and corrosion performance of 316L stainless steel multi-pass welds [Internet]. Journal of Materials Research and Technology. 2020 ; 9( 5): se/oct. 2020.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2020.07.039
Vancouver
Guilherme LH, Benedetti AV, Fugivara CS, Magnabosco R, Oliveira MF de. Effect of MAG welding transfer mode on sigma phase precipitation and corrosion performance of 316L stainless steel multi-pass welds [Internet]. Journal of Materials Research and Technology. 2020 ; 9( 5): se/oct. 2020.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2020.07.039
Artigo de periodico
Friction elements based on phenolic resin and slate powder (2020)
Binda, Felipe Ferreira; Oliveira, Victor de Alvarenga; Fortulan, Carlos Alberto ; Palhares, Luciana Boaventura; Santos, Claudio Gouvêa dos
Fonte: Journal of Materials Research and Technology. Unidade: EESC
Assuntos: FRICÇÃO, ARDÓSIA, RESÍDUOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BINDA, Felipe Ferreira et al. Friction elements based on phenolic resin and slate powder. Journal of Materials Research and Technology, v. 9, n. 3, p. 3378-3383, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2020.01.032. Acesso em: 05 dez. 2025.
APA
Binda, F. F., Oliveira, V. de A., Fortulan, C. A., Palhares, L. B., & Santos, C. G. dos. (2020). Friction elements based on phenolic resin and slate powder. Journal of Materials Research and Technology, 9( 3), 3378-3383. doi:10.1016/j.jmrt.2020.01.032
NLM
Binda FF, Oliveira V de A, Fortulan CA, Palhares LB, Santos CG dos. Friction elements based on phenolic resin and slate powder [Internet]. Journal of Materials Research and Technology. 2020 ; 9( 3): 3378-3383.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2020.01.032
Vancouver
Binda FF, Oliveira V de A, Fortulan CA, Palhares LB, Santos CG dos. Friction elements based on phenolic resin and slate powder [Internet]. Journal of Materials Research and Technology. 2020 ; 9( 3): 3378-3383.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2020.01.032

Unidades USP

ReP

Filtros

Unidades USP

Departamento

Autores

Autores USP

Ano de publicação

Assuntos

Grupo de pesquisa

Agência de fomento

Indexado em

Afiliação dos autores externos não normalizada

País das instituições de afiliação dos autores externos