Enhanced dissimilar aluminum alloy joints using 0.1 mm offset in refill friction stir spot welding (2025)
- Authors:
- Autor USP: WOLF, WITOR - EESC
- Unidade: EESC
- DOI: 10.1016/j.jmrt.2025.03.200
- Assunto: MATERIAIS
- Agências de fomento:
- Language: Inglês
- Imprenta:
- Publisher place: Rio de Janeiro, RJ
- Date published: 2025
- Source:
- Título: Journal of Materials Research and Technology
- ISSN: 2238-7854
- Volume/Número/Paginação/Ano: v. 36, p. 1091-1104, 2025
- Este periódico é de acesso aberto
- Este artigo é de acesso aberto
- URL de acesso aberto
- Cor do Acesso Aberto: gold
- Licença: cc-by-nc
-
ABNT
MARANHO, Jose Francisco Caldeira et al. Enhanced dissimilar aluminum alloy joints using 0.1 mm offset in refill friction stir spot welding. Journal of Materials Research and Technology, v. 36, p. 1091-1104, 2025Tradução . . Disponível em: https://dx.doi.org/10.1016/j.jmrt.2025.03.200. Acesso em: 27 dez. 2025. -
APA
Maranho, J. F. C., Fan, C., Huawei, T., Xiaosong, F., Hao, L., Junjun, S., et al. (2025). Enhanced dissimilar aluminum alloy joints using 0.1 mm offset in refill friction stir spot welding. Journal of Materials Research and Technology, 36, 1091-1104. doi:10.1016/j.jmrt.2025.03.200 -
NLM
Maranho JFC, Fan C, Huawei T, Xiaosong F, Hao L, Junjun S, Wolf W, Freitas BJM, Wenya L, Alcântara NG de, Santos JF dos, Klusemann B, Koga GY. Enhanced dissimilar aluminum alloy joints using 0.1 mm offset in refill friction stir spot welding [Internet]. Journal of Materials Research and Technology. 2025 ; 36 1091-1104.[citado 2025 dez. 27 ] Available from: https://dx.doi.org/10.1016/j.jmrt.2025.03.200 -
Vancouver
Maranho JFC, Fan C, Huawei T, Xiaosong F, Hao L, Junjun S, Wolf W, Freitas BJM, Wenya L, Alcântara NG de, Santos JF dos, Klusemann B, Koga GY. Enhanced dissimilar aluminum alloy joints using 0.1 mm offset in refill friction stir spot welding [Internet]. Journal of Materials Research and Technology. 2025 ; 36 1091-1104.[citado 2025 dez. 27 ] Available from: https://dx.doi.org/10.1016/j.jmrt.2025.03.200 - Determination of the critical cooling rate for quasicrystal formation in a gas-atomized Al90Cu4Fe2Cr4 (%at) alloy
- Laser-clad Al-matrix coatings reinforced with icosahedral quasicrystals obtained using Al-Cu-Fe–Cr decagonal quasicrystalline powders on Al substrates
- Preparation of porous Al–Cu–Fe–Cr quasicrystalline samples by alkaline leaching for adsorption and catalytic applications
- Effect of laser power on microstructure and hardness of a Cr-Co-Ni medium-entropy alloy
- Laser surface remelting to restore corrosion resistance in sulfide-compromised austenitic stainless steels
- Microstructural evolution and hardness enhancement in a novel CrMn-Fe-Co–Ni high entropy alloy processed by laser surface remelting
- Stacking-fault networks with Lomer-Cottrell locks induced by carbon addition in a severely strained Cr-Co-Ni alloy
- Formation of icosahedral quasicrystals embedded in an Al-FCC matrix, in a novel Al–Cu–Fe–Cr alloy, after laser remelting
- Icosahedral phase formation by laser surface remelting of a decagonal-based Al-Cu-Fe-Cr alloy
- Deposition of a quasicrystalline Al-Cu-Fe alloy on diamond via mechanical treatment in a planetary mill.
Informações sobre o DOI: 10.1016/j.jmrt.2025.03.200 (Fonte: oaDOI API)
Download do texto completo
| Tipo | Nome | Link | |
|---|---|---|---|
 |
1-s2.0-S2238785425007100-... | Direct link |
How to cite
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
