Formation of icosahedral quasicrystals embedded in an Al-FCC matrix, in a novel Al–Cu–Fe–Cr alloy, after laser remelting (2024)
- Authors:
- Autor USP: WOLF, WITOR - EESC
- Unidade: EESC
- DOI: 10.1007/s10853-024-10495-w
- Subjects: CRISTALOGRAFIA; LIGAS METÁLICAS; LASER; MICROSCOPIA
- Agências de fomento:
- Language: Inglês
- Imprenta:
- Source:
- Título: Journal of Materials Science
- ISSN: 0022-2461
- Volume/Número/Paginação/Ano: v. 59, n. 48, p. 22283-22291, 101367, 2024.
- Status:
- Artigo possui versão em acesso aberto em repositório (Green Open Access)
- Versão do Documento:
- Versão submetida (Pré-print)
- Acessar versão aberta:
-
ABNT
RODRIGUES, A. V. et al. Formation of icosahedral quasicrystals embedded in an Al-FCC matrix, in a novel Al–Cu–Fe–Cr alloy, after laser remelting. Journal of Materials Science, v. 59, n. 48, p. 22283-22291, 2024Tradução . . Disponível em: http://dx.doi.org/10.1007/s10853-024-10495-w. Acesso em: 31 mar. 2026. -
APA
Rodrigues, A. V., Ramirez, A. F., Zepon, G., Fogagnolo, J. B., & Wolf, W. (2024). Formation of icosahedral quasicrystals embedded in an Al-FCC matrix, in a novel Al–Cu–Fe–Cr alloy, after laser remelting. Journal of Materials Science, 59( 48), 22283-22291. doi:10.1007/s10853-024-10495-w -
NLM
Rodrigues AV, Ramirez AF, Zepon G, Fogagnolo JB, Wolf W. Formation of icosahedral quasicrystals embedded in an Al-FCC matrix, in a novel Al–Cu–Fe–Cr alloy, after laser remelting [Internet]. Journal of Materials Science. 2024 ; 59( 48): 22283-22291.[citado 2026 mar. 31 ] Available from: http://dx.doi.org/10.1007/s10853-024-10495-w -
Vancouver
Rodrigues AV, Ramirez AF, Zepon G, Fogagnolo JB, Wolf W. Formation of icosahedral quasicrystals embedded in an Al-FCC matrix, in a novel Al–Cu–Fe–Cr alloy, after laser remelting [Internet]. Journal of Materials Science. 2024 ; 59( 48): 22283-22291.[citado 2026 mar. 31 ] Available from: http://dx.doi.org/10.1007/s10853-024-10495-w - Laser-clad Al-matrix coatings reinforced with icosahedral quasicrystals obtained using Al-Cu-Fe–Cr decagonal quasicrystalline powders on Al substrates
- Preparation of porous Al–Cu–Fe–Cr quasicrystalline samples by alkaline leaching for adsorption and catalytic applications
- Deposition of a quasicrystalline Al-Cu-Fe alloy on diamond via mechanical treatment in a planetary mill.
- Enhanced dissimilar aluminum alloy joints using 0.1 mm offset in refill friction stir spot welding
- Stacking-fault networks with Lomer-Cottrell locks induced by carbon addition in a severely strained Cr-Co-Ni alloy
- Icosahedral phase formation by laser surface remelting of a decagonal-based Al-Cu-Fe-Cr alloy
- Laser surface remelting to restore corrosion resistance in sulfide-compromised austenitic stainless steels
- Determination of the critical cooling rate for quasicrystal formation in a gas-atomized Al90Cu4Fe2Cr4 (%at) alloy
- Microstructural evolution and hardness enhancement in a novel CrMn-Fe-Co–Ni high entropy alloy processed by laser surface remelting
- Effect of laser power on microstructure and hardness of a Cr-Co-Ni medium-entropy alloy
Informações sobre a disponibilidade de versões do artigo em acesso aberto coletadas automaticamente via oaDOI API (Unpaywall).
Por se tratar de integração com serviço externo, podem existir diferentes versões do trabalho (como preprints ou postprints), que podem diferir da versão publicada.
Download do texto completo
| Tipo | Nome | Link | |
|---|---|---|---|
 |
s10853-024-10495-w.pdf |
How to cite
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
