ReP USP - Resultado da busca

Artigo de periodico
Enhanced dissimilar aluminum alloy joints using 0.1 mm offset in refill friction stir spot welding (2025)
Maranho, Jose Francisco Caldeira; Fan, Cui; Huawei, Tang; Xiaosong, Feng; Hao, Luan; Junjun, Shen; Wolf, Witor ; Freitas, Brenda Juliet Martins; Wenya, Li; Alcântara, Nelson Guedes de; Santos, Jorge Fernandez dos; Klusemann, Benjamin; Koga, Guilherme Yuuki
Source: Journal of Materials Research and Technology. Unidade: EESC
Assunto: MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARANHO, Jose Francisco Caldeira et al. Enhanced dissimilar aluminum alloy joints using 0.1 mm offset in refill friction stir spot welding. Journal of Materials Research and Technology, v. 36, p. 1091-1104, 2025Tradução . . Disponível em: https://dx.doi.org/10.1016/j.jmrt.2025.03.200. Acesso em: 05 dez. 2025.
APA
Maranho, J. F. C., Fan, C., Huawei, T., Xiaosong, F., Hao, L., Junjun, S., et al. (2025). Enhanced dissimilar aluminum alloy joints using 0.1 mm offset in refill friction stir spot welding. Journal of Materials Research and Technology, 36, 1091-1104. doi:10.1016/j.jmrt.2025.03.200
NLM
Maranho JFC, Fan C, Huawei T, Xiaosong F, Hao L, Junjun S, Wolf W, Freitas BJM, Wenya L, Alcântara NG de, Santos JF dos, Klusemann B, Koga GY. Enhanced dissimilar aluminum alloy joints using 0.1 mm offset in refill friction stir spot welding [Internet]. Journal of Materials Research and Technology. 2025 ; 36 1091-1104.[citado 2025 dez. 05 ] Available from: https://dx.doi.org/10.1016/j.jmrt.2025.03.200
Vancouver
Maranho JFC, Fan C, Huawei T, Xiaosong F, Hao L, Junjun S, Wolf W, Freitas BJM, Wenya L, Alcântara NG de, Santos JF dos, Klusemann B, Koga GY. Enhanced dissimilar aluminum alloy joints using 0.1 mm offset in refill friction stir spot welding [Internet]. Journal of Materials Research and Technology. 2025 ; 36 1091-1104.[citado 2025 dez. 05 ] Available from: https://dx.doi.org/10.1016/j.jmrt.2025.03.200
Artigo de periodico
A new strategy for developing a Nb microalloyed fire-resistant steel: Effects of boron and cooling rate (2024)
Ferreira, Andrei Marx ; Ariza Echeverri, Edwan Anderson ; Bauri, Luis Felipe ; Gomes, P. M. C. D.; Carvalho, Felipe Moreno ; Masoumi, Mohammad ; Poplawsky, Jonathan D. ; Goldenstein, Hélio ; Tschiptschin, André Paulo
Source: Journal of Materials Research and Technology. Unidade: EP
Subjects: AÇO, INCÊNDIO, BORO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERREIRA, Andrei Marx et al. A new strategy for developing a Nb microalloyed fire-resistant steel: Effects of boron and cooling rate. Journal of Materials Research and Technology, v. No-Dec., p. 2365-2376, 2024Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2024.09.150. Acesso em: 05 dez. 2025.
APA
Ferreira, A. M., Ariza Echeverri, E. A., Bauri, L. F., Gomes, P. M. C. D., Carvalho, F. M., Masoumi, M., et al. (2024). A new strategy for developing a Nb microalloyed fire-resistant steel: Effects of boron and cooling rate. Journal of Materials Research and Technology, No-Dec., 2365-2376. doi:10.1016/j.jmrt.2024.09.150
NLM
Ferreira AM, Ariza Echeverri EA, Bauri LF, Gomes PMCD, Carvalho FM, Masoumi M, Poplawsky JD, Goldenstein H, Tschiptschin AP. A new strategy for developing a Nb microalloyed fire-resistant steel: Effects of boron and cooling rate [Internet]. Journal of Materials Research and Technology. 2024 ; No-Dec. 2365-2376.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2024.09.150
Vancouver
Ferreira AM, Ariza Echeverri EA, Bauri LF, Gomes PMCD, Carvalho FM, Masoumi M, Poplawsky JD, Goldenstein H, Tschiptschin AP. A new strategy for developing a Nb microalloyed fire-resistant steel: Effects of boron and cooling rate [Internet]. Journal of Materials Research and Technology. 2024 ; No-Dec. 2365-2376.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2024.09.150
Artigo de periodico
An experimental investigation of the mechanical properties and failure mode of 3D stitched composites (2024)
Reis, Lucas Moura Montenegro; Ribeiro, Marcelo Leite ; Madureira, Fernando; Morelli, Arnaldo Carlos; Monteiro, Sergio Neves; Arantes, Vera Lúcia
Source: Journal of Materials Research and Technology. Unidade: EESC
Subjects: 3-D VER TERCEIRA DIMENSÃO., TENACIDADE DOS MATERIAIS, MATERIAIS COMPÓSITOS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
REIS, Lucas Moura Montenegro et al. An experimental investigation of the mechanical properties and failure mode of 3D stitched composites. Journal of Materials Research and Technology, v. 29, p. 90-100, 2024Tradução . . Disponível em: https://dx.doi.org/10.1016/j.jmrt.2023.12.283. Acesso em: 05 dez. 2025.
APA
Reis, L. M. M., Ribeiro, M. L., Madureira, F., Morelli, A. C., Monteiro, S. N., & Arantes, V. L. (2024). An experimental investigation of the mechanical properties and failure mode of 3D stitched composites. Journal of Materials Research and Technology, 29, 90-100. doi:10.1016/j.jmrt.2023.12.283
NLM
Reis LMM, Ribeiro ML, Madureira F, Morelli AC, Monteiro SN, Arantes VL. An experimental investigation of the mechanical properties and failure mode of 3D stitched composites [Internet]. Journal of Materials Research and Technology. 2024 ; 29 90-100.[citado 2025 dez. 05 ] Available from: https://dx.doi.org/10.1016/j.jmrt.2023.12.283
Vancouver
Reis LMM, Ribeiro ML, Madureira F, Morelli AC, Monteiro SN, Arantes VL. An experimental investigation of the mechanical properties and failure mode of 3D stitched composites [Internet]. Journal of Materials Research and Technology. 2024 ; 29 90-100.[citado 2025 dez. 05 ] Available from: https://dx.doi.org/10.1016/j.jmrt.2023.12.283
Artigo de periodico
Effect of Mo content on microstructure and corrosion behavior in HCl of ultra-high strength maraging steels (2024)
Calderon-Hernández, José Wilmar ; Fonseca, Daniela Passarelo Moura da ; Prada Ramirez, Oscar Mauricio ; Hincapié-Ladino, Duberney ; Melo, Hercílio Gomes de ; Padilha, Angelo Fernando
Source: Journal of Materials Research and Technology. Unidade: EP
Subjects: AÇO, CORROSÃO, MOLIBDÊNIO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CALDERON-HERNÁNDEZ, José Wilmar et al. Effect of Mo content on microstructure and corrosion behavior in HCl of ultra-high strength maraging steels. Journal of Materials Research and Technology, p. 29, 2024Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2024.04.024. Acesso em: 05 dez. 2025.
APA
Calderon-Hernández, J. W., Fonseca, D. P. M. da, Prada Ramirez, O. M., Hincapié-Ladino, D., Melo, H. G. de, & Padilha, A. F. (2024). Effect of Mo content on microstructure and corrosion behavior in HCl of ultra-high strength maraging steels. Journal of Materials Research and Technology, 29. doi:10.1016/j.jmrt.2024.04.024
NLM
Calderon-Hernández JW, Fonseca DPM da, Prada Ramirez OM, Hincapié-Ladino D, Melo HG de, Padilha AF. Effect of Mo content on microstructure and corrosion behavior in HCl of ultra-high strength maraging steels [Internet]. Journal of Materials Research and Technology. 2024 ;29.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2024.04.024
Vancouver
Calderon-Hernández JW, Fonseca DPM da, Prada Ramirez OM, Hincapié-Ladino D, Melo HG de, Padilha AF. Effect of Mo content on microstructure and corrosion behavior in HCl of ultra-high strength maraging steels [Internet]. Journal of Materials Research and Technology. 2024 ;29.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2024.04.024
Artigo de periodico
Synthesis and characterization of novel fluorene-based green copolymers and their potential application in organic light-emitting diodes (2024)
Brito, Elisa Barbosa de; Santos, Daniela Corrêa; Paula, Taihana Parente de; Morais, Andreia de; Freitas, Jilian Nei de ; Valaski, Rogério; Marques, Maria de Fátima Vieira; Cocca, Leandro Henrique Zucolotto ; Pelosi, André Gasparotto ; De Boni, Leonardo ; Monteiro, Sergio Neves
Source: Journal of Materials Research and Technology. Unidade: IFSC
Subjects: BIOMATERIAIS, DIODOS, POLÍMEROS (MATERIAIS), LUMINESCÊNCIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BRITO, Elisa Barbosa de et al. Synthesis and characterization of novel fluorene-based green copolymers and their potential application in organic light-emitting diodes. Journal of Materials Research and Technology, v. 28, n. Ja- Feb. 2024, p. 4317-4333 + supplementary data, 2024Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2023.12.249. Acesso em: 05 dez. 2025.
APA
Brito, E. B. de, Santos, D. C., Paula, T. P. de, Morais, A. de, Freitas, J. N. de, Valaski, R., et al. (2024). Synthesis and characterization of novel fluorene-based green copolymers and their potential application in organic light-emitting diodes. Journal of Materials Research and Technology, 28( Ja- Feb. 2024), 4317-4333 + supplementary data. doi:10.1016/j.jmrt.2023.12.249
NLM
Brito EB de, Santos DC, Paula TP de, Morais A de, Freitas JN de, Valaski R, Marques M de FV, Cocca LHZ, Pelosi AG, De Boni L, Monteiro SN. Synthesis and characterization of novel fluorene-based green copolymers and their potential application in organic light-emitting diodes [Internet]. Journal of Materials Research and Technology. 2024 ; 28( Ja- Feb. 2024): 4317-4333 + supplementary data.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2023.12.249
Vancouver
Brito EB de, Santos DC, Paula TP de, Morais A de, Freitas JN de, Valaski R, Marques M de FV, Cocca LHZ, Pelosi AG, De Boni L, Monteiro SN. Synthesis and characterization of novel fluorene-based green copolymers and their potential application in organic light-emitting diodes [Internet]. Journal of Materials Research and Technology. 2024 ; 28( Ja- Feb. 2024): 4317-4333 + supplementary data.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2023.12.249
Artigo de periodico
Predicting gold accessibility from mineralogical characterization using machine learning algorithms (2024)
Costa, Fabrizzio Rodrigues ; Carneiro, Cleyton de Carvalho ; Ulsen, Carina
Source: Journal of Materials Research and Technology. Unidade: EP
Subjects: ANÁLISE DE DADOS, MINERALOGIA APLICADA, MINÉRIOS, OURO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COSTA, Fabrizzio Rodrigues e CARNEIRO, Cleyton de Carvalho e ULSEN, Carina. Predicting gold accessibility from mineralogical characterization using machine learning algorithms. Journal of Materials Research and Technology, v. 29, p. 10 , 2024Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2024.01.139. Acesso em: 05 dez. 2025.
APA
Costa, F. R., Carneiro, C. de C., & Ulsen, C. (2024). Predicting gold accessibility from mineralogical characterization using machine learning algorithms. Journal of Materials Research and Technology, 29, 10 . doi:10.1016/j.jmrt.2024.01.139
NLM
Costa FR, Carneiro C de C, Ulsen C. Predicting gold accessibility from mineralogical characterization using machine learning algorithms [Internet]. Journal of Materials Research and Technology. 2024 ;29 10 .[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2024.01.139
Vancouver
Costa FR, Carneiro C de C, Ulsen C. Predicting gold accessibility from mineralogical characterization using machine learning algorithms [Internet]. Journal of Materials Research and Technology. 2024 ;29 10 .[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2024.01.139
Artigo de periodico
Study of the contact angle and roughness effects on mercury intrusion porosimetry (MIP) analysis in natural/real carbonate rocks using massive pure minerals and synthetic carbonate rocks (2024)
Arismendi Florez, Jhonatan Jair ; Ferrari, Jean Vicente ; Ulsen, Carina
Source: Journal of Materials Research and Technology. Unidade: EP
Subjects: ROCHAS SEDIMENTARES, MERCÚRIO (ELEMENTO QUÍMICO), INTRUSÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ARISMENDI FLOREZ, Jhonatan Jair e FERRARI, Jean Vicente e ULSEN, Carina. Study of the contact angle and roughness effects on mercury intrusion porosimetry (MIP) analysis in natural/real carbonate rocks using massive pure minerals and synthetic carbonate rocks. Journal of Materials Research and Technology, v. 32, p. 286-317, 2024Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2024.07.177. Acesso em: 05 dez. 2025.
APA
Arismendi Florez, J. J., Ferrari, J. V., & Ulsen, C. (2024). Study of the contact angle and roughness effects on mercury intrusion porosimetry (MIP) analysis in natural/real carbonate rocks using massive pure minerals and synthetic carbonate rocks. Journal of Materials Research and Technology, 32, 286-317. doi:10.1016/j.jmrt.2024.07.177
NLM
Arismendi Florez JJ, Ferrari JV, Ulsen C. Study of the contact angle and roughness effects on mercury intrusion porosimetry (MIP) analysis in natural/real carbonate rocks using massive pure minerals and synthetic carbonate rocks [Internet]. Journal of Materials Research and Technology. 2024 ; 32 286-317.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2024.07.177
Vancouver
Arismendi Florez JJ, Ferrari JV, Ulsen C. Study of the contact angle and roughness effects on mercury intrusion porosimetry (MIP) analysis in natural/real carbonate rocks using massive pure minerals and synthetic carbonate rocks [Internet]. Journal of Materials Research and Technology. 2024 ; 32 286-317.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2024.07.177
Artigo de periodico
Corrosion behavior of 316L stainless steel reinforced by dispersed yttria stabilized zirconia fabricated by spark plasma sintering (2024)
Soares, Lucas de Figueiredo ; Brito Neto, Francisco Maciel de ; Reis, Lucas Moura Montenegro; Vacchi, Guilherme dos Santos; Monteiro, Sergio Neves; Rovere, Carlos Alberto Della; Arantes, Vera Lúcia
Source: Journal of Materials Research and Technology. Unidade: EESC
Subjects: AÇO INOXIDÁVEL, ZIRCÔNIA, SINTERIZAÇÃO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOARES, Lucas de Figueiredo et al. Corrosion behavior of 316L stainless steel reinforced by dispersed yttria stabilized zirconia fabricated by spark plasma sintering. Journal of Materials Research and Technology, v. 33, p. 2303-2314, 2024Tradução . . Disponível em: https://dx.doi.org/10.1016/j.jmrt.2024.09.214. Acesso em: 05 dez. 2025.
APA
Soares, L. de F., Brito Neto, F. M. de, Reis, L. M. M., Vacchi, G. dos S., Monteiro, S. N., Rovere, C. A. D., & Arantes, V. L. (2024). Corrosion behavior of 316L stainless steel reinforced by dispersed yttria stabilized zirconia fabricated by spark plasma sintering. Journal of Materials Research and Technology, 33, 2303-2314. doi:10.1016/j.jmrt.2024.09.214
NLM
Soares L de F, Brito Neto FM de, Reis LMM, Vacchi G dos S, Monteiro SN, Rovere CAD, Arantes VL. Corrosion behavior of 316L stainless steel reinforced by dispersed yttria stabilized zirconia fabricated by spark plasma sintering [Internet]. Journal of Materials Research and Technology. 2024 ; 33 2303-2314.[citado 2025 dez. 05 ] Available from: https://dx.doi.org/10.1016/j.jmrt.2024.09.214
Vancouver
Soares L de F, Brito Neto FM de, Reis LMM, Vacchi G dos S, Monteiro SN, Rovere CAD, Arantes VL. Corrosion behavior of 316L stainless steel reinforced by dispersed yttria stabilized zirconia fabricated by spark plasma sintering [Internet]. Journal of Materials Research and Technology. 2024 ; 33 2303-2314.[citado 2025 dez. 05 ] Available from: https://dx.doi.org/10.1016/j.jmrt.2024.09.214
Artigo de periodico
Rheology study of the starch gelatinization to understand the hematite depression process (2024)
Andrade, Elaine Cristina; Louzada, Jean Carlo Grijó ; Chelgani, Saeed Chehreh; Leal Filho, Laurindo de Salles
Source: Journal of Materials Research and Technology. Unidade: EP
Subjects: REOLOGIA, HEMATITA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ANDRADE, Elaine Cristina et al. Rheology study of the starch gelatinization to understand the hematite depression process. Journal of Materials Research and Technology, v. No-Dec. , p. 6251-6262, 2024Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2024.10.245. Acesso em: 05 dez. 2025.
APA
Andrade, E. C., Louzada, J. C. G., Chelgani, S. C., & Leal Filho, L. de S. (2024). Rheology study of the starch gelatinization to understand the hematite depression process. Journal of Materials Research and Technology, No-Dec. , 6251-6262. doi:10.1016/j.jmrt.2024.10.245
NLM
Andrade EC, Louzada JCG, Chelgani SC, Leal Filho L de S. Rheology study of the starch gelatinization to understand the hematite depression process [Internet]. Journal of Materials Research and Technology. 2024 ; No-Dec. 6251-6262.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2024.10.245
Vancouver
Andrade EC, Louzada JCG, Chelgani SC, Leal Filho L de S. Rheology study of the starch gelatinization to understand the hematite depression process [Internet]. Journal of Materials Research and Technology. 2024 ; No-Dec. 6251-6262.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2024.10.245
Artigo de periodico
Effect of building direction and heat treatment on the wear behavior of H13 tool steel processed by laser powder bed fusion (2024)
Oliveira, Adriel P; Ferreira, Tales; Coelho, Reginaldo Teixeira ; Bolfarini, Claudemiro; Gargarella, Piter
Source: Journal of Materials Research and Technology. Unidade: EESC
Subjects: AÇO, FERRAMENTAS, LEITE EM PÓ, RESISTÊNCIA DOS MATERIAIS, DESGASTE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Adriel P et al. Effect of building direction and heat treatment on the wear behavior of H13 tool steel processed by laser powder bed fusion. Journal of Materials Research and Technology, v. no 1, p. 9802-9810, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.jmrt.2024.12.012. Acesso em: 05 dez. 2025.
APA
Oliveira, A. P., Ferreira, T., Coelho, R. T., Bolfarini, C., & Gargarella, P. (2024). Effect of building direction and heat treatment on the wear behavior of H13 tool steel processed by laser powder bed fusion. Journal of Materials Research and Technology, no 1, 9802-9810. doi:10.1016/j.jmrt.2024.12.012
NLM
Oliveira AP, Ferreira T, Coelho RT, Bolfarini C, Gargarella P. Effect of building direction and heat treatment on the wear behavior of H13 tool steel processed by laser powder bed fusion [Internet]. Journal of Materials Research and Technology. 2024 ; no 1 9802-9810.[citado 2025 dez. 05 ] Available from: http://dx.doi.org/10.1016/j.jmrt.2024.12.012
Vancouver
Oliveira AP, Ferreira T, Coelho RT, Bolfarini C, Gargarella P. Effect of building direction and heat treatment on the wear behavior of H13 tool steel processed by laser powder bed fusion [Internet]. Journal of Materials Research and Technology. 2024 ; no 1 9802-9810.[citado 2025 dez. 05 ] Available from: http://dx.doi.org/10.1016/j.jmrt.2024.12.012
Artigo de periodico
Adherence of Brazilian dimension stones by mortar adhesion: influence of temperature (2023)
Ribeiro, Rogério Pinto ; Sichieri, Eduvaldo Paulo ; Alves, Daniela Tomaz; Xavier, Gustavo de Castro ; Azevedo, Afonso R.G. de; Monteiro, Sergio N
Source: Journal of Materials Research and Technology. Unidades: IAU, EESC
Subjects: ROCHAS ORNAMENTAIS, ARGAMASSA, GRANITO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Rogério Pinto et al. Adherence of Brazilian dimension stones by mortar adhesion: influence of temperature. Journal of Materials Research and Technology, v. 24, p. 8547-8557, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2023.05.042. Acesso em: 05 dez. 2025.
APA
Ribeiro, R. P., Sichieri, E. P., Alves, D. T., Xavier, G. de C., Azevedo, A. R. G. de, & Monteiro, S. N. (2023). Adherence of Brazilian dimension stones by mortar adhesion: influence of temperature. Journal of Materials Research and Technology, 24, 8547-8557. doi:10.1016/j.jmrt.2023.05.042
NLM
Ribeiro RP, Sichieri EP, Alves DT, Xavier G de C, Azevedo ARG de, Monteiro SN. Adherence of Brazilian dimension stones by mortar adhesion: influence of temperature [Internet]. Journal of Materials Research and Technology. 2023 ; 24 8547-8557.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2023.05.042
Vancouver
Ribeiro RP, Sichieri EP, Alves DT, Xavier G de C, Azevedo ARG de, Monteiro SN. Adherence of Brazilian dimension stones by mortar adhesion: influence of temperature [Internet]. Journal of Materials Research and Technology. 2023 ; 24 8547-8557.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2023.05.042
Artigo de periodico
Partially reduced graphene oxide produced by glucose in alkaline conditions using probe sonication: the role of the base in reduction (2023)
Teixeira, Jean Valdir Uchôa; Pimentel, Gabriel Junior Cavalcante; Santos, Adriana Alencar; Dias, Leonardo Francisco Gonçalves; Mastelaro, Valmor Roberto ; Lisboa-Filho, Paulo Noronha
Source: Journal of Materials Research and Technology. Unidade: IFSC
Subjects: NANOCOMPOSITOS, FOTOCATÁLISE, NANOPARTÍCULAS, MATERIAIS NANOESTRUTURADOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TEIXEIRA, Jean Valdir Uchôa et al. Partially reduced graphene oxide produced by glucose in alkaline conditions using probe sonication: the role of the base in reduction. Journal of Materials Research and Technology, v. 26, p. 1785-1797, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2023.07.211. Acesso em: 05 dez. 2025.
APA
Teixeira, J. V. U., Pimentel, G. J. C., Santos, A. A., Dias, L. F. G., Mastelaro, V. R., & Lisboa-Filho, P. N. (2023). Partially reduced graphene oxide produced by glucose in alkaline conditions using probe sonication: the role of the base in reduction. Journal of Materials Research and Technology, 26, 1785-1797. doi:10.1016/j.jmrt.2023.07.211
NLM
Teixeira JVU, Pimentel GJC, Santos AA, Dias LFG, Mastelaro VR, Lisboa-Filho PN. Partially reduced graphene oxide produced by glucose in alkaline conditions using probe sonication: the role of the base in reduction [Internet]. Journal of Materials Research and Technology. 2023 ; 26 1785-1797.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2023.07.211
Vancouver
Teixeira JVU, Pimentel GJC, Santos AA, Dias LFG, Mastelaro VR, Lisboa-Filho PN. Partially reduced graphene oxide produced by glucose in alkaline conditions using probe sonication: the role of the base in reduction [Internet]. Journal of Materials Research and Technology. 2023 ; 26 1785-1797.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2023.07.211
Artigo de periodico
Adherence of Brazilian dimension stones by mortar adhesion: influence of temperature (2023)
Ribeiro, Rogério Pinto ; Sichieri, Eduvaldo Paulo ; Alves, Daniela Tomaz; Xavier, Gustavo de Castro; Azevedo, Afonso R. G. de; Monteiro, Sergio N
Source: Journal of Materials Research and Technology. Unidades: EESC, IAU
Subjects: GRANITO, ARGAMASSA, GEOTECNIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Rogério Pinto et al. Adherence of Brazilian dimension stones by mortar adhesion: influence of temperature. Journal of Materials Research and Technology, v. 24, p. 8547-8557, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2023.05.042. Acesso em: 05 dez. 2025.
APA
Ribeiro, R. P., Sichieri, E. P., Alves, D. T., Xavier, G. de C., Azevedo, A. R. G. de, & Monteiro, S. N. (2023). Adherence of Brazilian dimension stones by mortar adhesion: influence of temperature. Journal of Materials Research and Technology, 24, 8547-8557. doi:10.1016/j.jmrt.2023.05.042
NLM
Ribeiro RP, Sichieri EP, Alves DT, Xavier G de C, Azevedo ARG de, Monteiro SN. Adherence of Brazilian dimension stones by mortar adhesion: influence of temperature [Internet]. Journal of Materials Research and Technology. 2023 ; 24 8547-8557.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2023.05.042
Vancouver
Ribeiro RP, Sichieri EP, Alves DT, Xavier G de C, Azevedo ARG de, Monteiro SN. Adherence of Brazilian dimension stones by mortar adhesion: influence of temperature [Internet]. Journal of Materials Research and Technology. 2023 ; 24 8547-8557.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2023.05.042
Artigo de periodico
Use of ball-cratering wear test and nanoscratching test to compare the wear resistance of homogeneous and functionally graded titanium nitride thin films (2023)
Silva, Felipe Carneiro da ; Macedo, Marcelo de Matos; Miscione, Juan Manuel Costa; Fontana, Luis César ; Sagás, Julio Cesar ; Cozza, Ronaldo Câmara ; Schön, Cláudio Geraldo
Source: Journal of Materials Research and Technology. Unidade: EP
Subjects: TRIBOLOGIA, DESGASTE DOS MATERIAIS, TITÂNIO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Felipe Carneiro da et al. Use of ball-cratering wear test and nanoscratching test to compare the wear resistance of homogeneous and functionally graded titanium nitride thin films. Journal of Materials Research and Technology, v. 22, p. 54-65, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2022.11.049. Acesso em: 05 dez. 2025.
APA
Silva, F. C. da, Macedo, M. de M., Miscione, J. M. C., Fontana, L. C., Sagás, J. C., Cozza, R. C., & Schön, C. G. (2023). Use of ball-cratering wear test and nanoscratching test to compare the wear resistance of homogeneous and functionally graded titanium nitride thin films. Journal of Materials Research and Technology, 22, 54-65. doi:10.1016/j.jmrt.2022.11.049
NLM
Silva FC da, Macedo M de M, Miscione JMC, Fontana LC, Sagás JC, Cozza RC, Schön CG. Use of ball-cratering wear test and nanoscratching test to compare the wear resistance of homogeneous and functionally graded titanium nitride thin films [Internet]. Journal of Materials Research and Technology. 2023 ; 22 54-65.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2022.11.049
Vancouver
Silva FC da, Macedo M de M, Miscione JMC, Fontana LC, Sagás JC, Cozza RC, Schön CG. Use of ball-cratering wear test and nanoscratching test to compare the wear resistance of homogeneous and functionally graded titanium nitride thin films [Internet]. Journal of Materials Research and Technology. 2023 ; 22 54-65.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2022.11.049
Artigo de periodico
Effect of pearlitic and bainitic initial microstructure on cementite spheroidization in rail steels (2023)
Pereira, Henrique Boschetti ; Ariza Echeverri, Edwan Anderson ; Centeno, Dany Michell Andrade ; Souza, Samuel da Silva de; Bauri, Luiz Felipe ; Manfrinato, Marcos Dorigão ; Masoumi, Mohammad ; Alves, Luiz Henrique Dias; Goldenstein, Hélio
Source: Journal of Materials Research and Technology. Unidades: EP, Interunidades em Ciência e Engenharia de Materiais
Subjects: FERROVIAS, TRILHOS, AÇO, TRATAMENTO TÉRMICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Henrique Boschetti et al. Effect of pearlitic and bainitic initial microstructure on cementite spheroidization in rail steels. Journal of Materials Research and Technology, v. 23, p. 1903-1918, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2023.01.087. Acesso em: 05 dez. 2025.
APA
Pereira, H. B., Ariza Echeverri, E. A., Centeno, D. M. A., Souza, S. da S. de, Bauri, L. F., Manfrinato, M. D., et al. (2023). Effect of pearlitic and bainitic initial microstructure on cementite spheroidization in rail steels. Journal of Materials Research and Technology, 23, 1903-1918. doi:10.1016/j.jmrt.2023.01.087
NLM
Pereira HB, Ariza Echeverri EA, Centeno DMA, Souza S da S de, Bauri LF, Manfrinato MD, Masoumi M, Alves LHD, Goldenstein H. Effect of pearlitic and bainitic initial microstructure on cementite spheroidization in rail steels [Internet]. Journal of Materials Research and Technology. 2023 ;23 1903-1918.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2023.01.087
Vancouver
Pereira HB, Ariza Echeverri EA, Centeno DMA, Souza S da S de, Bauri LF, Manfrinato MD, Masoumi M, Alves LHD, Goldenstein H. Effect of pearlitic and bainitic initial microstructure on cementite spheroidization in rail steels [Internet]. Journal of Materials Research and Technology. 2023 ;23 1903-1918.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2023.01.087
Artigo de periodico
Ferritic layers formation mechanism during oxidation of FeMnSiCrNi alloys: Effect of temperature and influence on oxidation behavior (2023)
Passos, João Gabriel da Cruz; Freitas, Bruno Xavier de; Silva, Rodrigo da; Della Rovere, Carlos Alberto; Magnabosco, Rodrigo ; Oliveira, Marcelo Falcão de ; Malafaia, Artur Mariano de Sousa
Source: Journal of Materials Research and Technology. Unidade: EESC
Subjects: OXIDAÇÃO, MUDANÇA DE FASE, LIGAS METÁLICAS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PASSOS, João Gabriel da Cruz et al. Ferritic layers formation mechanism during oxidation of FeMnSiCrNi alloys: Effect of temperature and influence on oxidation behavior. Journal of Materials Research and Technology, v. 27, p. 1281-1292, 2023Tradução . . Disponível em: http://dx.doi.org/10.1016/j.jmrt.2023.10.026. Acesso em: 05 dez. 2025.
APA
Passos, J. G. da C., Freitas, B. X. de, Silva, R. da, Della Rovere, C. A., Magnabosco, R., Oliveira, M. F. de, & Malafaia, A. M. de S. (2023). Ferritic layers formation mechanism during oxidation of FeMnSiCrNi alloys: Effect of temperature and influence on oxidation behavior. Journal of Materials Research and Technology, 27, 1281-1292. doi:10.1016/j.jmrt.2023.10.026
NLM
Passos JG da C, Freitas BX de, Silva R da, Della Rovere CA, Magnabosco R, Oliveira MF de, Malafaia AM de S. Ferritic layers formation mechanism during oxidation of FeMnSiCrNi alloys: Effect of temperature and influence on oxidation behavior [Internet]. Journal of Materials Research and Technology. 2023 ; 27 1281-1292.[citado 2025 dez. 05 ] Available from: http://dx.doi.org/10.1016/j.jmrt.2023.10.026
Vancouver
Passos JG da C, Freitas BX de, Silva R da, Della Rovere CA, Magnabosco R, Oliveira MF de, Malafaia AM de S. Ferritic layers formation mechanism during oxidation of FeMnSiCrNi alloys: Effect of temperature and influence on oxidation behavior [Internet]. Journal of Materials Research and Technology. 2023 ; 27 1281-1292.[citado 2025 dez. 05 ] Available from: http://dx.doi.org/10.1016/j.jmrt.2023.10.026
Artigo de periodico
Simple and low-cost transition metal-free borophosphate glass catalyst for aromatic alcohol oxidation by sodium hypochlorite (2022)
Lenz, Guilherme Felipe; Selinger, Bruno Henrique; Sequinel, Rodrigo; Silva, Fabiano Rosa da; Manzani, Danilo ; Felix, Jorlandio Francisco; Schneider, Ricardo
Source: Journal of Materials Research and Technology. Unidade: IQSC
Subjects: OXIDAÇÃO, QUÍMICA ORGÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LENZ, Guilherme Felipe et al. Simple and low-cost transition metal-free borophosphate glass catalyst for aromatic alcohol oxidation by sodium hypochlorite. Journal of Materials Research and Technology, v. 19, p. 1457-1471, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2022.05.105. Acesso em: 05 dez. 2025.
APA
Lenz, G. F., Selinger, B. H., Sequinel, R., Silva, F. R. da, Manzani, D., Felix, J. F., & Schneider, R. (2022). Simple and low-cost transition metal-free borophosphate glass catalyst for aromatic alcohol oxidation by sodium hypochlorite. Journal of Materials Research and Technology, 19, 1457-1471. doi:10.1016/j.jmrt.2022.05.105
NLM
Lenz GF, Selinger BH, Sequinel R, Silva FR da, Manzani D, Felix JF, Schneider R. Simple and low-cost transition metal-free borophosphate glass catalyst for aromatic alcohol oxidation by sodium hypochlorite [Internet]. Journal of Materials Research and Technology. 2022 ; 19 1457-1471.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2022.05.105
Vancouver
Lenz GF, Selinger BH, Sequinel R, Silva FR da, Manzani D, Felix JF, Schneider R. Simple and low-cost transition metal-free borophosphate glass catalyst for aromatic alcohol oxidation by sodium hypochlorite [Internet]. Journal of Materials Research and Technology. 2022 ; 19 1457-1471.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2022.05.105
Artigo de periodico
Mineral characterization of low-grade gold ore to support geometallurgy (2022)
Costa, Fabrizzio Rodrigues ; Nery, Guilherme Pinho ; Carneiro, Cleyton de Carvalho ; Kahn, Henrique ; Ulsen, Carina
Source: Journal of Materials Research and Technology. Unidade: EP
Subjects: CARACTERIZAÇÃO TECNOLÓGICA DE MINÉRIOS, MINÉRIOS, OURO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COSTA, Fabrizzio Rodrigues et al. Mineral characterization of low-grade gold ore to support geometallurgy. Journal of Materials Research and Technology, v. 21, p. 2841-2852, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2022.10.085. Acesso em: 05 dez. 2025.
APA
Costa, F. R., Nery, G. P., Carneiro, C. de C., Kahn, H., & Ulsen, C. (2022). Mineral characterization of low-grade gold ore to support geometallurgy. Journal of Materials Research and Technology, 21, 2841-2852. doi:10.1016/j.jmrt.2022.10.085
NLM
Costa FR, Nery GP, Carneiro C de C, Kahn H, Ulsen C. Mineral characterization of low-grade gold ore to support geometallurgy [Internet]. Journal of Materials Research and Technology. 2022 ;21 2841-2852.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2022.10.085
Vancouver
Costa FR, Nery GP, Carneiro C de C, Kahn H, Ulsen C. Mineral characterization of low-grade gold ore to support geometallurgy [Internet]. Journal of Materials Research and Technology. 2022 ;21 2841-2852.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2022.10.085
Artigo de periodico
Electrochemical characterization of 13Cr low-carbon martensitic stainless steel - corrosion study with a mini-cell setup (2022)
Calderon-Hernández, José Wilmar ; Gonzáles Ramirez, Mario Fernando; Sepulveda-Castaño, Jorge Mauricio; Santos Martinez, Juan David ; Quispe Avilés, Janeth Marlene ; Magnabosco, Rodrigo ; Goldenstein, Hélio
Source: Journal of Materials Research and Technology. Unidade: EP
Subjects: ELETROQUÍMICA, AÇO CARBONO, AÇO INOXIDÁVEL MARTENSÍTICO, TERMODINÂMICA, CINÉTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CALDERON-HERNÁNDEZ, José Wilmar et al. Electrochemical characterization of 13Cr low-carbon martensitic stainless steel - corrosion study with a mini-cell setup. Journal of Materials Research and Technology, v. 21, p. 2989-2998, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2022.10.094. Acesso em: 05 dez. 2025.
APA
Calderon-Hernández, J. W., Gonzáles Ramirez, M. F., Sepulveda-Castaño, J. M., Santos Martinez, J. D., Quispe Avilés, J. M., Magnabosco, R., & Goldenstein, H. (2022). Electrochemical characterization of 13Cr low-carbon martensitic stainless steel - corrosion study with a mini-cell setup. Journal of Materials Research and Technology, 21, 2989-2998. doi:10.1016/j.jmrt.2022.10.094
NLM
Calderon-Hernández JW, Gonzáles Ramirez MF, Sepulveda-Castaño JM, Santos Martinez JD, Quispe Avilés JM, Magnabosco R, Goldenstein H. Electrochemical characterization of 13Cr low-carbon martensitic stainless steel - corrosion study with a mini-cell setup [Internet]. Journal of Materials Research and Technology. 2022 ; 21 2989-2998.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2022.10.094
Vancouver
Calderon-Hernández JW, Gonzáles Ramirez MF, Sepulveda-Castaño JM, Santos Martinez JD, Quispe Avilés JM, Magnabosco R, Goldenstein H. Electrochemical characterization of 13Cr low-carbon martensitic stainless steel - corrosion study with a mini-cell setup [Internet]. Journal of Materials Research and Technology. 2022 ; 21 2989-2998.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2022.10.094
Artigo de periodico
Characterization of coir fiber powder (cocos nucifera L.) as an environmentally friendly inhibitor pigment for organic coatings (2022)
Freitas, Bárbara Rodrigues ; Braga, Jorgimara De Oliveira; Orlandi, M. P; Silva, Brunela Pereira da ; Aoki, Idalina Vieira ; Lins, Vanessa de Freitas Cunha ; Cotting, Fernando
Source: Journal of Materials Research and Technology. Unidade: EP
Subjects: INIBIDORES QUÍMICOS, CORROSÃO, RESÍDUOS AGRÍCOLAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FREITAS, Bárbara Rodrigues et al. Characterization of coir fiber powder (cocos nucifera L.) as an environmentally friendly inhibitor pigment for organic coatings. Journal of Materials Research and Technology, v. 19, p. 1332-1342, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2022.05.098. Acesso em: 05 dez. 2025.
APA
Freitas, B. R., Braga, J. D. O., Orlandi, M. P., Silva, B. P. da, Aoki, I. V., Lins, V. de F. C., & Cotting, F. (2022). Characterization of coir fiber powder (cocos nucifera L.) as an environmentally friendly inhibitor pigment for organic coatings. Journal of Materials Research and Technology, 19, 1332-1342. doi:10.1016/j.jmrt.2022.05.098
NLM
Freitas BR, Braga JDO, Orlandi MP, Silva BP da, Aoki IV, Lins V de FC, Cotting F. Characterization of coir fiber powder (cocos nucifera L.) as an environmentally friendly inhibitor pigment for organic coatings [Internet]. Journal of Materials Research and Technology. 2022 ; 19 1332-1342.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2022.05.098
Vancouver
Freitas BR, Braga JDO, Orlandi MP, Silva BP da, Aoki IV, Lins V de FC, Cotting F. Characterization of coir fiber powder (cocos nucifera L.) as an environmentally friendly inhibitor pigment for organic coatings [Internet]. Journal of Materials Research and Technology. 2022 ; 19 1332-1342.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2022.05.098

USP Schools

ReP

Filtros

USP Schools

Departament

Authors

USP affiliated authors

Date published

Subjects

Grupo de pesquisa

Funding Agencies

Indexado em

Non normalized affiliation

Countries of institutions of collaboration