ReP USP - Resultado da busca

Artigo de periodico
Comparison of experimental results with numerical simulation of thermal performance in car radiator using MWCNT/EG/water nanofuid (2024)
Nascimento, Erick Oliveira do; Cardenas Contreras, Edwin Martin; Cabezas Gómez, Luben ; Bandarra Filho, Enio Pedone
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: TRANSFERÊNCIA DE CALOR, DINÂMICA DOS FLUÍDOS COMPUTACIONAL, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
NASCIMENTO, Erick Oliveira do et al. Comparison of experimental results with numerical simulation of thermal performance in car radiator using MWCNT/EG/water nanofuid. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 46, p. 1-16, 2024Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-024-05013-7. Acesso em: 12 jul. 2024.
APA
Nascimento, E. O. do, Cardenas Contreras, E. M., Cabezas Gómez, L., & Bandarra Filho, E. P. (2024). Comparison of experimental results with numerical simulation of thermal performance in car radiator using MWCNT/EG/water nanofuid. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46, 1-16. doi:10.1007/s40430-024-05013-7
NLM
Nascimento EO do, Cardenas Contreras EM, Cabezas Gómez L, Bandarra Filho EP. Comparison of experimental results with numerical simulation of thermal performance in car radiator using MWCNT/EG/water nanofuid [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-16.[citado 2024 jul. 12 ] Available from: https://dx.doi.org/10.1007/s40430-024-05013-7
Vancouver
Nascimento EO do, Cardenas Contreras EM, Cabezas Gómez L, Bandarra Filho EP. Comparison of experimental results with numerical simulation of thermal performance in car radiator using MWCNT/EG/water nanofuid [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-16.[citado 2024 jul. 12 ] Available from: https://dx.doi.org/10.1007/s40430-024-05013-7
Artigo de periodico
Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty (2024)
Marini, Vinicius K.; Sorban, Bruno A.; Silva, Maíra Martins da ; Bortolussi, Roberto; Fleury, Agenor de Toledo ; Trigo, Flávio Celso
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidades: EESC, EP
Subjects: MOTORES DE COMBUSTÃO INTERNA, VEÍCULOS ELÉTRICOS, DINÂMICA VEICULAR, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARINI, Vinicius K. et al. Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 46, p. 1-14, 2024Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-023-04604-0. Acesso em: 12 jul. 2024.
APA
Marini, V. K., Sorban, B. A., Silva, M. M. da, Bortolussi, R., Fleury, A. de T., & Trigo, F. C. (2024). Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46, 1-14. doi:10.1007/s40430-023-04604-0
NLM
Marini VK, Sorban BA, Silva MM da, Bortolussi R, Fleury A de T, Trigo FC. Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-14.[citado 2024 jul. 12 ] Available from: https://dx.doi.org/10.1007/s40430-023-04604-0
Vancouver
Marini VK, Sorban BA, Silva MM da, Bortolussi R, Fleury A de T, Trigo FC. Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-14.[citado 2024 jul. 12 ] Available from: https://dx.doi.org/10.1007/s40430-023-04604-0
Artigo de periodico
Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units (2024)
Martins, Ivan Talão; Fariñas Alvariño, Pablo; Cabezas Gómez, Luben
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: TRELIÇAS, FENÔMENOS DE TRANSPORTE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTINS, Ivan Talão e FARIÑAS ALVARIÑO, Pablo e CABEZAS GÓMEZ, Luben. Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 46, p. 1-28, 2024Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-024-04905-y. Acesso em: 12 jul. 2024.
APA
Martins, I. T., Fariñas Alvariño, P., & Cabezas Gómez, L. (2024). Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46, 1-28. doi:10.1007/s40430-024-04905-y
NLM
Martins IT, Fariñas Alvariño P, Cabezas Gómez L. Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-28.[citado 2024 jul. 12 ] Available from: https://dx.doi.org/10.1007/s40430-024-04905-y
Vancouver
Martins IT, Fariñas Alvariño P, Cabezas Gómez L. Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-28.[citado 2024 jul. 12 ] Available from: https://dx.doi.org/10.1007/s40430-024-04905-y
Trabalho de evento
Characterization of the bones of different bovine breeds based on the microarchitecture of the bone tissue (2023)
Erbereli, Rogério ; Camargo, Italo Leite de ; Marcondes, Cintia Righetti ; Tullio, Rymer Ramiz; Fortulan, Carlos Alberto ; Rollo, João Manuel Domingos de Almeida
Source: Proceedings of the 8th Brazilian Technology Symposium (BTSym’22). BTSym 2022. Smart Innovation, Systems and Technologies. Conference titles: Brazilian Technology Symposium. Unidade: EESC
Subjects: OSSO E OSSOS, HIDROXIAPATITA, DIFRAÇÃO POR RAIOS X, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ERBERELI, Rogério et al. Characterization of the bones of different bovine breeds based on the microarchitecture of the bone tissue. 2023, Anais.. Berlim, Germany: Springer, 2023. p. 382-390. Disponível em: https://doi.org/10.1007/978-3-031-31007-2_35. Acesso em: 12 jul. 2024.
APA
Erbereli, R., Camargo, I. L. de, Marcondes, C. R., Tullio, R. R., Fortulan, C. A., & Rollo, J. M. D. de A. (2023). Characterization of the bones of different bovine breeds based on the microarchitecture of the bone tissue. In Proceedings of the 8th Brazilian Technology Symposium (BTSym’22). BTSym 2022. Smart Innovation, Systems and Technologies (Vol. 353, p. 382-390). Berlim, Germany: Springer. doi:10.1007/978-3-031-31007-2_35
NLM
Erbereli R, Camargo IL de, Marcondes CR, Tullio RR, Fortulan CA, Rollo JMD de A. Characterization of the bones of different bovine breeds based on the microarchitecture of the bone tissue [Internet]. Proceedings of the 8th Brazilian Technology Symposium (BTSym’22). BTSym 2022. Smart Innovation, Systems and Technologies. 2023 ; 353 382-390.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/978-3-031-31007-2_35
Vancouver
Erbereli R, Camargo IL de, Marcondes CR, Tullio RR, Fortulan CA, Rollo JMD de A. Characterization of the bones of different bovine breeds based on the microarchitecture of the bone tissue [Internet]. Proceedings of the 8th Brazilian Technology Symposium (BTSym’22). BTSym 2022. Smart Innovation, Systems and Technologies. 2023 ; 353 382-390.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/978-3-031-31007-2_35
Artigo de periodico
Numerical simulation of a single‑compartment household refrigerator during start‑up transient and stationary cyclic operation with diferent refrigerant charges (2021)
Guzella, Matheus dos Santos; Cabezas Gómez, Luben ; Guimarães, Luiz Gustavo Monteiro
Source: Arabian Journal for Science and Engineering. Unidade: EESC
Subjects: TRANSFERÊNCIA DE CALOR, ELETRODOMÉSTICO, REFRIGERAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GUZELLA, Matheus dos Santos e CABEZAS GÓMEZ, Luben e GUIMARÃES, Luiz Gustavo Monteiro. Numerical simulation of a single‑compartment household refrigerator during start‑up transient and stationary cyclic operation with diferent refrigerant charges. Arabian Journal for Science and Engineering, p. 1-10, 2021Tradução . . Disponível em: https://doi.org/10.1007/s13369-021-05490-1. Acesso em: 12 jul. 2024.
APA
Guzella, M. dos S., Cabezas Gómez, L., & Guimarães, L. G. M. (2021). Numerical simulation of a single‑compartment household refrigerator during start‑up transient and stationary cyclic operation with diferent refrigerant charges. Arabian Journal for Science and Engineering, 1-10. doi:10.1007/s13369-021-05490-1
NLM
Guzella M dos S, Cabezas Gómez L, Guimarães LGM. Numerical simulation of a single‑compartment household refrigerator during start‑up transient and stationary cyclic operation with diferent refrigerant charges [Internet]. Arabian Journal for Science and Engineering. 2021 ; 1-10.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s13369-021-05490-1
Vancouver
Guzella M dos S, Cabezas Gómez L, Guimarães LGM. Numerical simulation of a single‑compartment household refrigerator during start‑up transient and stationary cyclic operation with diferent refrigerant charges [Internet]. Arabian Journal for Science and Engineering. 2021 ; 1-10.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s13369-021-05490-1
Artigo de periodico
Certifcation of linear closed-loop controllers using the v-gap metric and the generalized stability margin (2021)
Okle, Jan; Noppeney, Victor Tamassia; Cunha, Thiago Boaventura
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: CONTROLADORES PROGRAMÁVEIS, SISTEMAS DINÂMICOS, ROBÔS, SISTEMAS DE CONTROLE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OKLE, Jan e NOPPENEY, Victor Tamassia e CUNHA, Thiago Boaventura. Certifcation of linear closed-loop controllers using the v-gap metric and the generalized stability margin. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-10, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03079-1. Acesso em: 12 jul. 2024.
APA
Okle, J., Noppeney, V. T., & Cunha, T. B. (2021). Certifcation of linear closed-loop controllers using the v-gap metric and the generalized stability margin. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-10. doi:10.1007/s40430-021-03079-1
NLM
Okle J, Noppeney VT, Cunha TB. Certifcation of linear closed-loop controllers using the v-gap metric and the generalized stability margin [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-10.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40430-021-03079-1
Vancouver
Okle J, Noppeney VT, Cunha TB. Certifcation of linear closed-loop controllers using the v-gap metric and the generalized stability margin [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-10.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40430-021-03079-1
Artigo de periodico
Numerical simulation of the two-dimensional heat diffusion in the cold substrate and performance analysis of a thermoelectric air cooler using the lattice Boltzmann method (2021)
Guzella, Matheus dos Santos; Santos, Gustavo Ribeiro dos; Cabezas Gómez, Luben ; Campo, Antonio; Guimarães, Luiz Gustavo Monteiro
Source: International Journal of Applied and Computational Mathematics. Unidade: EESC
Subjects: TRELIÇAS, SIMULAÇÃO, ENGENHARIA MECÂNICA, TERMOELETRICIDADE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GUZELLA, Matheus dos Santos et al. Numerical simulation of the two-dimensional heat diffusion in the cold substrate and performance analysis of a thermoelectric air cooler using the lattice Boltzmann method. International Journal of Applied and Computational Mathematics, v. 7, p. 1-18, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40819-021-01073-8. Acesso em: 12 jul. 2024.
APA
Guzella, M. dos S., Santos, G. R. dos, Cabezas Gómez, L., Campo, A., & Guimarães, L. G. M. (2021). Numerical simulation of the two-dimensional heat diffusion in the cold substrate and performance analysis of a thermoelectric air cooler using the lattice Boltzmann method. International Journal of Applied and Computational Mathematics, 7, 1-18. doi:10.1007/s40819-021-01073-8
NLM
Guzella M dos S, Santos GR dos, Cabezas Gómez L, Campo A, Guimarães LGM. Numerical simulation of the two-dimensional heat diffusion in the cold substrate and performance analysis of a thermoelectric air cooler using the lattice Boltzmann method [Internet]. International Journal of Applied and Computational Mathematics. 2021 ; 7 1-18.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40819-021-01073-8
Vancouver
Guzella M dos S, Santos GR dos, Cabezas Gómez L, Campo A, Guimarães LGM. Numerical simulation of the two-dimensional heat diffusion in the cold substrate and performance analysis of a thermoelectric air cooler using the lattice Boltzmann method [Internet]. International Journal of Applied and Computational Mathematics. 2021 ; 7 1-18.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40819-021-01073-8
Artigo de periodico
Task‑space impedance control of a parallel Delta robot using dual quaternions and a neural network (2021)
Noppeney, Victor Tamassia; Cunha, Thiago Boaventura; Siqueira, Adriano Almeida Gonçalves
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: IMPEDÂNCIA ELÉTRICA, CINEMÁTICA, REDES NEURAIS, QUATERNIOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
NOPPENEY, Victor Tamassia e CUNHA, Thiago Boaventura e SIQUEIRA, Adriano Almeida Gonçalves. Task‑space impedance control of a parallel Delta robot using dual quaternions and a neural network. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-11, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03157-4. Acesso em: 12 jul. 2024.
APA
Noppeney, V. T., Cunha, T. B., & Siqueira, A. A. G. (2021). Task‑space impedance control of a parallel Delta robot using dual quaternions and a neural network. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-11. doi:10.1007/s40430-021-03157-4
NLM
Noppeney VT, Cunha TB, Siqueira AAG. Task‑space impedance control of a parallel Delta robot using dual quaternions and a neural network [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-11.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40430-021-03157-4
Vancouver
Noppeney VT, Cunha TB, Siqueira AAG. Task‑space impedance control of a parallel Delta robot using dual quaternions and a neural network [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-11.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40430-021-03157-4
Artigo de periodico
Size effects in ultraprecision machining of aluminum alloys: conventional AA6061-T6 and RSA 6061-T6 (2021)
Jasinevicius, Renato Goulart ; Otoboni, José Antônio; Basso, Igor Fernando; Dib, Marcel Henrique Militão
Source: Journal of Manufacturing Processes. Unidade: EESC
Assunto: ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart et al. Size effects in ultraprecision machining of aluminum alloys: conventional AA6061-T6 and RSA 6061-T6. Journal of Manufacturing Processes, v. 68, p. 136-157, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.jmapro.2021.07.027. Acesso em: 12 jul. 2024.
APA
Jasinevicius, R. G., Otoboni, J. A., Basso, I. F., & Dib, M. H. M. (2021). Size effects in ultraprecision machining of aluminum alloys: conventional AA6061-T6 and RSA 6061-T6. Journal of Manufacturing Processes, 68, 136-157. doi:10.1016/j.jmapro.2021.07.027
NLM
Jasinevicius RG, Otoboni JA, Basso IF, Dib MHM. Size effects in ultraprecision machining of aluminum alloys: conventional AA6061-T6 and RSA 6061-T6 [Internet]. Journal of Manufacturing Processes. 2021 ; 68 136-157.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1016/j.jmapro.2021.07.027
Vancouver
Jasinevicius RG, Otoboni JA, Basso IF, Dib MHM. Size effects in ultraprecision machining of aluminum alloys: conventional AA6061-T6 and RSA 6061-T6 [Internet]. Journal of Manufacturing Processes. 2021 ; 68 136-157.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1016/j.jmapro.2021.07.027
Artigo de periodico
Dampening of a cantilever beam with large particles in a small cavity: model and experiment (2021)
Gorla, Filipe Debonzi; Nicoletti, Rodrigo
Source: Archive of Applied Mechanics. Unidade: EESC
Subjects: VIBRAÇÕES, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GORLA, Filipe Debonzi e NICOLETTI, Rodrigo. Dampening of a cantilever beam with large particles in a small cavity: model and experiment. Archive of Applied Mechanics, p. [1-10], 2021Tradução . . Disponível em: https://doi.org/10.1007/s00419-021-01946-w. Acesso em: 12 jul. 2024.
APA
Gorla, F. D., & Nicoletti, R. (2021). Dampening of a cantilever beam with large particles in a small cavity: model and experiment. Archive of Applied Mechanics, [1-10]. doi:10.1007/s00419-021-01946-w
NLM
Gorla FD, Nicoletti R. Dampening of a cantilever beam with large particles in a small cavity: model and experiment [Internet]. Archive of Applied Mechanics. 2021 ;[1-10].[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s00419-021-01946-w
Vancouver
Gorla FD, Nicoletti R. Dampening of a cantilever beam with large particles in a small cavity: model and experiment [Internet]. Archive of Applied Mechanics. 2021 ;[1-10].[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s00419-021-01946-w
Artigo de periodico
Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF) (2021)
Moreira, Tiago Augusto; Duarte, Juliana Pacheco; Nascimento, Francisco Júlio do; Ribatski, Gherhardt
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: TRANSFERÊNCIA DE CALOR, NANOPARTÍCULAS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOREIRA, Tiago Augusto et al. Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF). Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-16, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03035-z. Acesso em: 12 jul. 2024.
APA
Moreira, T. A., Duarte, J. P., Nascimento, F. J. do, & Ribatski, G. (2021). Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF). Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-16. doi:10.1007/s40430-021-03035-z
NLM
Moreira TA, Duarte JP, Nascimento FJ do, Ribatski G. Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF) [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-16.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40430-021-03035-z
Vancouver
Moreira TA, Duarte JP, Nascimento FJ do, Ribatski G. Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF) [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-16.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40430-021-03035-z
Artigo de periodico
Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions (2021)
Barbosa, Ismael Motta; Alves, Paulo Rodrigues; Silveira, Zilda de Castro
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: TECNOLOGIAS DA SAÚDE, ACIDENTE VASCULAR CEREBRAL, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BARBOSA, Ismael Motta e ALVES, Paulo Rodrigues e SILVEIRA, Zilda de Castro. Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-16, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-02919-4. Acesso em: 12 jul. 2024.
APA
Barbosa, I. M., Alves, P. R., & Silveira, Z. de C. (2021). Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-16. doi:10.1007/s40430-021-02919-4
NLM
Barbosa IM, Alves PR, Silveira Z de C. Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-16.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40430-021-02919-4
Vancouver
Barbosa IM, Alves PR, Silveira Z de C. Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-16.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40430-021-02919-4
Artigo de periodico
An experimental study of refrigerant expansion inside coiled adiabatic capillary tubes and development of a general correlation (2021)
Shimizu, Gérson Koiti Kurosawa; Colmanetti, Alex Roger Almeida; Gardenghi, Álvaro Roberto; Cabezas Gómez, Luben ; Tibiriçá, Cristiano Bigonha
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: REFRIGERAÇÃO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SHIMIZU, Gérson Koiti Kurosawa et al. An experimental study of refrigerant expansion inside coiled adiabatic capillary tubes and development of a general correlation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-20, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-020-02762-z. Acesso em: 12 jul. 2024.
APA
Shimizu, G. K. K., Colmanetti, A. R. A., Gardenghi, Á. R., Cabezas Gómez, L., & Tibiriçá, C. B. (2021). An experimental study of refrigerant expansion inside coiled adiabatic capillary tubes and development of a general correlation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-20. doi:10.1007/s40430-020-02762-z
NLM
Shimizu GKK, Colmanetti ARA, Gardenghi ÁR, Cabezas Gómez L, Tibiriçá CB. An experimental study of refrigerant expansion inside coiled adiabatic capillary tubes and development of a general correlation [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-20.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40430-020-02762-z
Vancouver
Shimizu GKK, Colmanetti ARA, Gardenghi ÁR, Cabezas Gómez L, Tibiriçá CB. An experimental study of refrigerant expansion inside coiled adiabatic capillary tubes and development of a general correlation [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-20.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40430-020-02762-z
Artigo de periodico
Design and numerical evaluation of quadrotor drone frame suitable for fabrication using fused flament fabrication with consumer‑grade ABS (2021)
Oliveira, Tarcisio Ladeia de; Carvalho, Jonas de
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, AERONAVES NÃO TRIPULADAS, MANUFATURA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Tarcisio Ladeia de e CARVALHO, Jonas de. Design and numerical evaluation of quadrotor drone frame suitable for fabrication using fused flament fabrication with consumer‑grade ABS. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-19, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03160-9. Acesso em: 12 jul. 2024.
APA
Oliveira, T. L. de, & Carvalho, J. de. (2021). Design and numerical evaluation of quadrotor drone frame suitable for fabrication using fused flament fabrication with consumer‑grade ABS. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-19. doi:10.1007/s40430-021-03160-9
NLM
Oliveira TL de, Carvalho J de. Design and numerical evaluation of quadrotor drone frame suitable for fabrication using fused flament fabrication with consumer‑grade ABS [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-19.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40430-021-03160-9
Vancouver
Oliveira TL de, Carvalho J de. Design and numerical evaluation of quadrotor drone frame suitable for fabrication using fused flament fabrication with consumer‑grade ABS [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-19.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40430-021-03160-9
Artigo de periodico
Self‑difusion in nanofuids of nonelongated particles in the dilute limit (2021)
Fariñas Alvariño, Pablo; Saiz Jabardo, José Maria; Cabezas Gómez, Luben
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: NANOPARTÍCULAS, ESCOAMENTO BIFÁSICO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FARIÑAS ALVARIÑO, Pablo e SAIZ JABARDO, José Maria e CABEZAS GÓMEZ, Luben. Self‑difusion in nanofuids of nonelongated particles in the dilute limit. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-18, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03101-6. Acesso em: 12 jul. 2024.
APA
Fariñas Alvariño, P., Saiz Jabardo, J. M., & Cabezas Gómez, L. (2021). Self‑difusion in nanofuids of nonelongated particles in the dilute limit. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-18. doi:10.1007/s40430-021-03101-6
NLM
Fariñas Alvariño P, Saiz Jabardo JM, Cabezas Gómez L. Self‑difusion in nanofuids of nonelongated particles in the dilute limit [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-18.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40430-021-03101-6
Vancouver
Fariñas Alvariño P, Saiz Jabardo JM, Cabezas Gómez L. Self‑difusion in nanofuids of nonelongated particles in the dilute limit [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-18.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40430-021-03101-6
Artigo de periodico
Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches (2021)
Santos, Artur Valadares de Freitas; Silveira, Zilda de Castro
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: MANUFATURA, TECNOLOGIAS DA SAÚDE, TERCEIRA DIMENSÃO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Artur Valadares de Freitas e SILVEIRA, Zilda de Castro. Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-15, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03184-1. Acesso em: 12 jul. 2024.
APA
Santos, A. V. de F., & Silveira, Z. de C. (2021). Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-15. doi:10.1007/s40430-021-03184-1
NLM
Santos AV de F, Silveira Z de C. Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-15.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40430-021-03184-1
Vancouver
Santos AV de F, Silveira Z de C. Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-15.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40430-021-03184-1
Artigo de periodico
Design and performance analysis of a compact series elastic actuator for exoskeletons (2021)
Gaitani, Fabio Henrique Masetto de; Santos, Wilian M. dos; Siqueira, Adriano Almeida Gonçalves
Source: Journal of Control, Automation and Electrical Systems. Unidade: EESC
Subjects: TECNOLOGIAS DA SAÚDE, ROBÓTICA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GAITANI, Fabio Henrique Masetto de e SANTOS, Wilian M. dos e SIQUEIRA, Adriano Almeida Gonçalves. Design and performance analysis of a compact series elastic actuator for exoskeletons. Journal of Control, Automation and Electrical Systems, p. 1-10, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40313-021-00863-1. Acesso em: 12 jul. 2024.
APA
Gaitani, F. H. M. de, Santos, W. M. dos, & Siqueira, A. A. G. (2021). Design and performance analysis of a compact series elastic actuator for exoskeletons. Journal of Control, Automation and Electrical Systems, 1-10. doi:10.1007/s40313-021-00863-1
NLM
Gaitani FHM de, Santos WM dos, Siqueira AAG. Design and performance analysis of a compact series elastic actuator for exoskeletons [Internet]. Journal of Control, Automation and Electrical Systems. 2021 ; 1-10.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40313-021-00863-1
Vancouver
Gaitani FHM de, Santos WM dos, Siqueira AAG. Design and performance analysis of a compact series elastic actuator for exoskeletons [Internet]. Journal of Control, Automation and Electrical Systems. 2021 ; 1-10.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40313-021-00863-1
Artigo de periodico
Total energy thermal lattice Boltzmann simulation of mixed convection in a square cavity (2021)
Mapelli, Vinicius Pessoa; Czelusniak, Luiz Eduardo ; Guzella, Matheus dos Santos; Cabezas Gómez, Luben
Source: International Journal of Applied and Computational Mathematics. Unidade: EESC
Subjects: ESCOAMENTO BIFÁSICO, TRANSFERÊNCIA DE CALOR, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MAPELLI, Vinicius Pessoa et al. Total energy thermal lattice Boltzmann simulation of mixed convection in a square cavity. International Journal of Applied and Computational Mathematics, v. 7, p. 1-18, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40819-021-01147-7. Acesso em: 12 jul. 2024.
APA
Mapelli, V. P., Czelusniak, L. E., Guzella, M. dos S., & Cabezas Gómez, L. (2021). Total energy thermal lattice Boltzmann simulation of mixed convection in a square cavity. International Journal of Applied and Computational Mathematics, 7, 1-18. doi:10.1007/s40819-021-01147-7
NLM
Mapelli VP, Czelusniak LE, Guzella M dos S, Cabezas Gómez L. Total energy thermal lattice Boltzmann simulation of mixed convection in a square cavity [Internet]. International Journal of Applied and Computational Mathematics. 2021 ; 7 1-18.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40819-021-01147-7
Vancouver
Mapelli VP, Czelusniak LE, Guzella M dos S, Cabezas Gómez L. Total energy thermal lattice Boltzmann simulation of mixed convection in a square cavity [Internet]. International Journal of Applied and Computational Mathematics. 2021 ; 7 1-18.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40819-021-01147-7
Artigo de periodico
Flow boiling heat transfer of R134a in a 500 µm ID tube (2020)
Santos Filho, Erivelto dos; Aguiar, Gustavo Matana; Ribatski, Gherhardt
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: CANAIS DE ESCOAMENTO, TRANSFERÊNCIA DE CALOR, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS FILHO, Erivelto dos e AGUIAR, Gustavo Matana e RIBATSKI, Gherhardt. Flow boiling heat transfer of R134a in a 500 µm ID tube. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 42, p. 1-19, 2020Tradução . . Disponível em: https://doi.org/10.1007/s40430-020-02325-2. Acesso em: 12 jul. 2024.
APA
Santos Filho, E. dos, Aguiar, G. M., & Ribatski, G. (2020). Flow boiling heat transfer of R134a in a 500 µm ID tube. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-19. doi:10.1007/s40430-020-02325-2
NLM
Santos Filho E dos, Aguiar GM, Ribatski G. Flow boiling heat transfer of R134a in a 500 µm ID tube [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-19.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40430-020-02325-2
Vancouver
Santos Filho E dos, Aguiar GM, Ribatski G. Flow boiling heat transfer of R134a in a 500 µm ID tube [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-19.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40430-020-02325-2
Artigo de periodico
AT-d8sign: methodology to support development of assistive devices focused on user-centered design and 3D technologies (2020)
Santos, Artur Valadares de Freitas; Silveira, Zilda de Castro
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: TECNOLOGIAS DA SAÚDE, DESIGN DE PRODUTOS, IMAGEM 3D, IMPRESSÃO, ENGENHARIA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Artur Valadares de Freitas e SILVEIRA, Zilda de Castro. AT-d8sign: methodology to support development of assistive devices focused on user-centered design and 3D technologies. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 42, p. 1-15, 2020Tradução . . Disponível em: https://doi.org/10.1007/s40430-020-02347-w. Acesso em: 12 jul. 2024.
APA
Santos, A. V. de F., & Silveira, Z. de C. (2020). AT-d8sign: methodology to support development of assistive devices focused on user-centered design and 3D technologies. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-15. doi:10.1007/s40430-020-02347-w
NLM
Santos AV de F, Silveira Z de C. AT-d8sign: methodology to support development of assistive devices focused on user-centered design and 3D technologies [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-15.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40430-020-02347-w
Vancouver
Santos AV de F, Silveira Z de C. AT-d8sign: methodology to support development of assistive devices focused on user-centered design and 3D technologies [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-15.[citado 2024 jul. 12 ] Available from: https://doi.org/10.1007/s40430-020-02347-w

USP Schools

ReP

Filtros

Document Types

Departament

Authors

USP affiliated authors

Date published

Subjects

Source title

Publisher

Conference titles

Funding Agencies

Indexado em

Normalized affiliation

Non normalized affiliation

Countries of institutions of collaboration