ReP USP - Resultado da busca

Artigo de periodico
A critical review of probabilistic live load models for buildings: models, surveys, Eurocode statistics and reliability-based calibration (2024)
Costa, Luis Gustavo Lopes; Beck, André Teófilo
Fonte: Structural Safety. Unidade: EESC
Assuntos: EDIFÍCIOS, PROBABILIDADE, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COSTA, Luis Gustavo Lopes e BECK, André Teófilo. A critical review of probabilistic live load models for buildings: models, surveys, Eurocode statistics and reliability-based calibration. Structural Safety, v. 106, p. 1-24, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.strusafe.2023.102411. Acesso em: 29 ago. 2024.
APA
Costa, L. G. L., & Beck, A. T. (2024). A critical review of probabilistic live load models for buildings: models, surveys, Eurocode statistics and reliability-based calibration. Structural Safety, 106, 1-24. doi:10.1016/j.strusafe.2023.102411
NLM
Costa LGL, Beck AT. A critical review of probabilistic live load models for buildings: models, surveys, Eurocode statistics and reliability-based calibration [Internet]. Structural Safety. 2024 ; 106 1-24.[citado 2024 ago. 29 ] Available from: http://dx.doi.org/10.1016/j.strusafe.2023.102411
Vancouver
Costa LGL, Beck AT. A critical review of probabilistic live load models for buildings: models, surveys, Eurocode statistics and reliability-based calibration [Internet]. Structural Safety. 2024 ; 106 1-24.[citado 2024 ago. 29 ] Available from: http://dx.doi.org/10.1016/j.strusafe.2023.102411
Artigo de periodico
Typical values statistical analysis for adult chest and abdomen-pelvis CT examinations (2024)
Costa, Paulo Roberto ; Castro, Jullianna Cristina de Oliveira; Nunes, Isabella Pazian Fernandes; Nersissian, Denise Yanikian ; Sawamura, Marcio Valente Yamada ; Leão Filho, Hilton ; Tomal, Alessandra
Fonte: Radiation Physics and Chemistry. Unidades: IF, FM
Assuntos: RADIOLOGIA, TOMOGRAFIA, ANÁLISE ESTATÍSTICA DE DADOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COSTA, Paulo Roberto et al. Typical values statistical analysis for adult chest and abdomen-pelvis CT examinations. Radiation Physics and Chemistry, p. 111669/1-111669/9, 2024Tradução . . Disponível em: https://doi.org/10.1016/j.radphyschem.2024.111669. Acesso em: 29 ago. 2024.
APA
Costa, P. R., Castro, J. C. de O., Nunes, I. P. F., Nersissian, D. Y., Sawamura, M. V. Y., Leão Filho, H., & Tomal, A. (2024). Typical values statistical analysis for adult chest and abdomen-pelvis CT examinations. Radiation Physics and Chemistry, 111669/1-111669/9. doi:10.1016/j.radphyschem.2024.111669
NLM
Costa PR, Castro JC de O, Nunes IPF, Nersissian DY, Sawamura MVY, Leão Filho H, Tomal A. Typical values statistical analysis for adult chest and abdomen-pelvis CT examinations [Internet]. Radiation Physics and Chemistry. 2024 ; 111669/1-111669/9.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.radphyschem.2024.111669
Vancouver
Costa PR, Castro JC de O, Nunes IPF, Nersissian DY, Sawamura MVY, Leão Filho H, Tomal A. Typical values statistical analysis for adult chest and abdomen-pelvis CT examinations [Internet]. Radiation Physics and Chemistry. 2024 ; 111669/1-111669/9.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.radphyschem.2024.111669
Artigo de periodico
Melt flow characterization of highly loaded cooper filled poly(acrylonitrile-co-butadiene-co-styrene (2024)
Sakahara, Rogério Massanori; Silva, Daniel José da ; Hui,Wang Shu
Fonte: Composites Part B. Unidade: EP
Assuntos: POLÍMEROS (MATERIAIS), REOLOGIA, MATERIAIS COMPÓSITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SAKAHARA, Rogério Massanori e SILVA, Daniel José da e HUI, Wang Shu. Melt flow characterization of highly loaded cooper filled poly(acrylonitrile-co-butadiene-co-styrene. Composites Part B, p. 35 , 2024Tradução . . Disponível em: https://doi.org/10.1016/j.compositesb.2024.111392. Acesso em: 29 ago. 2024.
APA
Sakahara, R. M., Silva, D. J. da, & Hui, W. S. (2024). Melt flow characterization of highly loaded cooper filled poly(acrylonitrile-co-butadiene-co-styrene. Composites Part B, 35 . doi:10.1016/j.compositesb.2024.111392
NLM
Sakahara RM, Silva DJ da, Hui WS. Melt flow characterization of highly loaded cooper filled poly(acrylonitrile-co-butadiene-co-styrene [Internet]. Composites Part B. 2024 ;35 .[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.compositesb.2024.111392
Vancouver
Sakahara RM, Silva DJ da, Hui WS. Melt flow characterization of highly loaded cooper filled poly(acrylonitrile-co-butadiene-co-styrene [Internet]. Composites Part B. 2024 ;35 .[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.compositesb.2024.111392
Artigo de periodico
Cooling of power electronic devices using rectangular flat heat pipes with externally and internally cooled condenser regions (2024)
Rakishith, Bairi Levi; Asirvatham, Lazarus Godson; Angeline, Appadurai Anitha; Raj, Jaya Antony Perinba Selvin; Bose, Jefferson Raja; Princess, P. Joyce Beryl; Gautam, Sneha; Mahian, Omid; Ribatski, Gherhardt ; Wongwises, Somchai
Fonte: Applied Thermal Engineering. Unidade: EESC
Assuntos: ELETRÔNICA DE POTÊNCIA, EVAPORAÇÃO, DISPOSITIVOS ELETRÔNICOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RAKISHITH, Bairi Levi et al. Cooling of power electronic devices using rectangular flat heat pipes with externally and internally cooled condenser regions. Applied Thermal Engineering, v. 236, p. 1-13, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.applthermaleng.2023.121474. Acesso em: 29 ago. 2024.
APA
Rakishith, B. L., Asirvatham, L. G., Angeline, A. A., Raj, J. A. P. S., Bose, J. R., Princess, P. J. B., et al. (2024). Cooling of power electronic devices using rectangular flat heat pipes with externally and internally cooled condenser regions. Applied Thermal Engineering, 236, 1-13. doi:10.1016/j.applthermaleng.2023.121474
NLM
Rakishith BL, Asirvatham LG, Angeline AA, Raj JAPS, Bose JR, Princess PJB, Gautam S, Mahian O, Ribatski G, Wongwises S. Cooling of power electronic devices using rectangular flat heat pipes with externally and internally cooled condenser regions [Internet]. Applied Thermal Engineering. 2024 ; 236 1-13.[citado 2024 ago. 29 ] Available from: http://dx.doi.org/10.1016/j.applthermaleng.2023.121474
Vancouver
Rakishith BL, Asirvatham LG, Angeline AA, Raj JAPS, Bose JR, Princess PJB, Gautam S, Mahian O, Ribatski G, Wongwises S. Cooling of power electronic devices using rectangular flat heat pipes with externally and internally cooled condenser regions [Internet]. Applied Thermal Engineering. 2024 ; 236 1-13.[citado 2024 ago. 29 ] Available from: http://dx.doi.org/10.1016/j.applthermaleng.2023.121474
Artigo de periodico
Microbial meat: A sustainable vegan protein source produced from agri-waste to feed the world (2023)
Alves, Samara Cardoso; Ruiz, Erick Diaz; Lisboa, Bruna; Sharma, Minaxi ; Mussatto, Solange Inês ; Thakur, Vijay Kumar ; Kalaskar, Deepak M.; Gupta, Vijai Kumar ; Chandel, Anuj Kumar
Fonte: Food research international. Unidades: EEL, BIOTECNOLOGIA
Assuntos: BIOTECNOLOGIA, SUSTENTABILIDADE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALVES, Samara Cardoso et al. Microbial meat: A sustainable vegan protein source produced from agri-waste to feed the world. Food research international, v. 166, p. 1-12, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.foodres.2023.112596. Acesso em: 29 ago. 2024.
APA
Alves, S. C., Ruiz, E. D., Lisboa, B., Sharma, M., Mussatto, S. I., Thakur, V. K., et al. (2023). Microbial meat: A sustainable vegan protein source produced from agri-waste to feed the world. Food research international, 166, 1-12. doi:10.1016/j.foodres.2023.112596
NLM
Alves SC, Ruiz ED, Lisboa B, Sharma M, Mussatto SI, Thakur VK, Kalaskar DM, Gupta VK, Chandel AK. Microbial meat: A sustainable vegan protein source produced from agri-waste to feed the world [Internet]. Food research international. 2023 ;166 1-12.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.foodres.2023.112596
Vancouver
Alves SC, Ruiz ED, Lisboa B, Sharma M, Mussatto SI, Thakur VK, Kalaskar DM, Gupta VK, Chandel AK. Microbial meat: A sustainable vegan protein source produced from agri-waste to feed the world [Internet]. Food research international. 2023 ;166 1-12.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.foodres.2023.112596
Artigo de periodico
Strategies to control pH in the dark fermentation of sugarcane vinasse: impacts on sulfate reduction, biohydrogen production and metabolite distribution (2023)
Rogeri, Renan Coghi; Rogeri, Renan Coghi; Fuess, Lucas Tadeu ; Eng, Felipe ; Borges, André do Vale; Araujo, Matheus Neves de; Damianovic, Márcia Helena Rissato Zamariolli ; Silva, Ariovaldo José da
Fonte: Journal of Environmental Management. Unidade: EESC
Assuntos: FERMENTAÇÃO, HIDROGÊNIO, VINHAÇA, CANA-DE-AÇÚCAR, ENGENHARIA HIDRÁULICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ROGERI, Renan Coghi et al. Strategies to control pH in the dark fermentation of sugarcane vinasse: impacts on sulfate reduction, biohydrogen production and metabolite distribution. Journal of Environmental Management, v. 325, p. 1-11, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.jenvman.2022.116495. Acesso em: 29 ago. 2024.
APA
Rogeri, R. C., Rogeri, R. C., Fuess, L. T., Eng, F., Borges, A. do V., Araujo, M. N. de, et al. (2023). Strategies to control pH in the dark fermentation of sugarcane vinasse: impacts on sulfate reduction, biohydrogen production and metabolite distribution. Journal of Environmental Management, 325, 1-11. doi:10.1016/j.jenvman.2022.116495
NLM
Rogeri RC, Rogeri RC, Fuess LT, Eng F, Borges A do V, Araujo MN de, Damianovic MHRZ, Silva AJ da. Strategies to control pH in the dark fermentation of sugarcane vinasse: impacts on sulfate reduction, biohydrogen production and metabolite distribution [Internet]. Journal of Environmental Management. 2023 ; 325 1-11.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.jenvman.2022.116495
Vancouver
Rogeri RC, Rogeri RC, Fuess LT, Eng F, Borges A do V, Araujo MN de, Damianovic MHRZ, Silva AJ da. Strategies to control pH in the dark fermentation of sugarcane vinasse: impacts on sulfate reduction, biohydrogen production and metabolite distribution [Internet]. Journal of Environmental Management. 2023 ; 325 1-11.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.jenvman.2022.116495
Artigo de periodico
Microbial communities and metabolic pathways involved in reductive decolorization of an azo dye in a two-stage AD system (2023)
Oliveira, J. M. S. ; Poulsen, Jan Struckmann; Foresti, Eugenio ; Nielsen, J. L.
Fonte: Chemosphere. Unidade: EESC
Assuntos: TRATAMENTO BIOLÓGICO DE ÁGUAS RESIDUÁRIAS, DIGESTÃO ANAERÓBIA, ENGENHARIA HIDRÁULICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, J. M. S. et al. Microbial communities and metabolic pathways involved in reductive decolorization of an azo dye in a two-stage AD system. Chemosphere, v. 310, p. 1-10, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.chemosphere.2022.136731. Acesso em: 29 ago. 2024.
APA
Oliveira, J. M. S., Poulsen, J. S., Foresti, E., & Nielsen, J. L. (2023). Microbial communities and metabolic pathways involved in reductive decolorization of an azo dye in a two-stage AD system. Chemosphere, 310, 1-10. doi:10.1016/j.chemosphere.2022.136731
NLM
Oliveira JMS, Poulsen JS, Foresti E, Nielsen JL. Microbial communities and metabolic pathways involved in reductive decolorization of an azo dye in a two-stage AD system [Internet]. Chemosphere. 2023 ; 310 1-10.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.chemosphere.2022.136731
Vancouver
Oliveira JMS, Poulsen JS, Foresti E, Nielsen JL. Microbial communities and metabolic pathways involved in reductive decolorization of an azo dye in a two-stage AD system [Internet]. Chemosphere. 2023 ; 310 1-10.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.chemosphere.2022.136731
Artigo de periodico
Vibration-based multiphase-flow pattern classification via machine learning techniques (2023)
Sestito, Guilherme Serpa ; Álvarez-Briceño, Ricardo; Ribatski, Gherhardt ; Silva, Maíra Martins da ; Oliveira, Leopoldo Pisanelli Rodrigues de
Fonte: Flow Measurement and Instrumentation. Unidade: EESC
Assuntos: ESCOAMENTO MULTIFÁSICO, VIBRAÇÕES, REDES NEURAIS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SESTITO, Guilherme Serpa et al. Vibration-based multiphase-flow pattern classification via machine learning techniques. Flow Measurement and Instrumentation, v. 89, p. 1-12, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.flowmeasinst.2022.102290. Acesso em: 29 ago. 2024.
APA
Sestito, G. S., Álvarez-Briceño, R., Ribatski, G., Silva, M. M. da, & Oliveira, L. P. R. de. (2023). Vibration-based multiphase-flow pattern classification via machine learning techniques. Flow Measurement and Instrumentation, 89, 1-12. doi:10.1016/j.flowmeasinst.2022.102290
NLM
Sestito GS, Álvarez-Briceño R, Ribatski G, Silva MM da, Oliveira LPR de. Vibration-based multiphase-flow pattern classification via machine learning techniques [Internet]. Flow Measurement and Instrumentation. 2023 ; 89 1-12.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.flowmeasinst.2022.102290
Vancouver
Sestito GS, Álvarez-Briceño R, Ribatski G, Silva MM da, Oliveira LPR de. Vibration-based multiphase-flow pattern classification via machine learning techniques [Internet]. Flow Measurement and Instrumentation. 2023 ; 89 1-12.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.flowmeasinst.2022.102290
Artigo de periodico
A concurrent fibre orientation and topology optimisation framework for 3D-printed fibre-reinforced composites (2023)
Almeida Júnior, José Humberto Santos; Christoff, Bruno Guilherme; Tita, Volnei ; St-Pierre, Luc
Fonte: Composites Science and Technology. Unidade: EESC
Assuntos: MATERIAIS COMPÓSITOS, IMPRESSÃO 3-D, TOPOLOGIA, MANUFATURA ADITIVA, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALMEIDA JÚNIOR, José Humberto Santos et al. A concurrent fibre orientation and topology optimisation framework for 3D-printed fibre-reinforced composites. Composites Science and Technology, v. 232, p. 1-15, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.compscitech.2022.109872. Acesso em: 29 ago. 2024.
APA
Almeida Júnior, J. H. S., Christoff, B. G., Tita, V., & St-Pierre, L. (2023). A concurrent fibre orientation and topology optimisation framework for 3D-printed fibre-reinforced composites. Composites Science and Technology, 232, 1-15. doi:10.1016/j.compscitech.2022.109872
NLM
Almeida Júnior JHS, Christoff BG, Tita V, St-Pierre L. A concurrent fibre orientation and topology optimisation framework for 3D-printed fibre-reinforced composites [Internet]. Composites Science and Technology. 2023 ; 232 1-15.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.compscitech.2022.109872
Vancouver
Almeida Júnior JHS, Christoff BG, Tita V, St-Pierre L. A concurrent fibre orientation and topology optimisation framework for 3D-printed fibre-reinforced composites [Internet]. Composites Science and Technology. 2023 ; 232 1-15.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.compscitech.2022.109872
Artigo de periodico
Shipyard facility layout optimization through the implementation of a sequential structure of algorithms (2023)
Azzolini Júnior, Walther ; Azzolini, Frederico Gomes Pires; Mundim, Leandro Resende ; Porto, Arthur José Vieira; Amani, Henry Joel Segho
Fonte: Heliyon. Unidade: EESC
Assuntos: ARRANJO FÍSICO, ESTALEIROS, ALGORITMOS GENÉTICOS, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AZZOLINI JÚNIOR, Walther et al. Shipyard facility layout optimization through the implementation of a sequential structure of algorithms. Heliyon, p. 1-50, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.heliyon.2023.e1671. Acesso em: 29 ago. 2024.
APA
Azzolini Júnior, W., Azzolini, F. G. P., Mundim, L. R., Porto, A. J. V., & Amani, H. J. S. (2023). Shipyard facility layout optimization through the implementation of a sequential structure of algorithms. Heliyon, 1-50. doi:10.1016/j.heliyon.2023.e1671
NLM
Azzolini Júnior W, Azzolini FGP, Mundim LR, Porto AJV, Amani HJS. Shipyard facility layout optimization through the implementation of a sequential structure of algorithms [Internet]. Heliyon. 2023 ; 1-50.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.heliyon.2023.e1671
Vancouver
Azzolini Júnior W, Azzolini FGP, Mundim LR, Porto AJV, Amani HJS. Shipyard facility layout optimization through the implementation of a sequential structure of algorithms [Internet]. Heliyon. 2023 ; 1-50.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.heliyon.2023.e1671
Artigo de periodico
On the accuracy of power flow and load margin calculation caused by incorrect logical PV/PQ switching: analytics and improved methods (2023)
Lin, Zeng; Hsiao-Dong, Chiang; Neves, Lucas Sales; Alberto, Luís Fernando Costa
Fonte: International Journal of Electrical Power & Energy Systems. Unidade: EESC
Assuntos: ENGENHARIA ELÉTRICA, SISTEMAS ELÉTRICOS DE POTÊNCIA, POTENCIAL ELÉTRICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LIN, Zeng et al. On the accuracy of power flow and load margin calculation caused by incorrect logical PV/PQ switching: analytics and improved methods. International Journal of Electrical Power & Energy Systems, v. 147, p. 1-9, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.ijepes.2022.108905. Acesso em: 29 ago. 2024.
APA
Lin, Z., Hsiao-Dong, C., Neves, L. S., & Alberto, L. F. C. (2023). On the accuracy of power flow and load margin calculation caused by incorrect logical PV/PQ switching: analytics and improved methods. International Journal of Electrical Power & Energy Systems, 147, 1-9. doi:10.1016/j.ijepes.2022.108905
NLM
Lin Z, Hsiao-Dong C, Neves LS, Alberto LFC. On the accuracy of power flow and load margin calculation caused by incorrect logical PV/PQ switching: analytics and improved methods [Internet]. International Journal of Electrical Power & Energy Systems. 2023 ; 147 1-9.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.ijepes.2022.108905
Vancouver
Lin Z, Hsiao-Dong C, Neves LS, Alberto LFC. On the accuracy of power flow and load margin calculation caused by incorrect logical PV/PQ switching: analytics and improved methods [Internet]. International Journal of Electrical Power & Energy Systems. 2023 ; 147 1-9.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.ijepes.2022.108905
Artigo de periodico
Performance-based design of pseudo-sliding mode speed control for electrical motor drives (2023)
Lumertz, Mateus Moro; Santos, Stefan Thiago Cury Alves dos; Guazzelli, Paulo Roberto Ubaldo; Oliveira, Carlos M. R.; Aguiar, Manoel Luis de ; Monteiro, José Roberto Boffino de Almeida
Fonte: Control Engineering Practice. Unidade: EESC
Assuntos: ENGENHARIA ELÉTRICA, MOTORES ELÉTRICOS, SISTEMAS DINÂMICOS, SISTEMAS DE CONTROLE, MÁQUINAS ELÉTRICAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LUMERTZ, Mateus Moro et al. Performance-based design of pseudo-sliding mode speed control for electrical motor drives. Control Engineering Practice, v. 132, p. 1-8, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.conengprac.2022.105413. Acesso em: 29 ago. 2024.
APA
Lumertz, M. M., Santos, S. T. C. A. dos, Guazzelli, P. R. U., Oliveira, C. M. R., Aguiar, M. L. de, & Monteiro, J. R. B. de A. (2023). Performance-based design of pseudo-sliding mode speed control for electrical motor drives. Control Engineering Practice, 132, 1-8. doi:10.1016/j.conengprac.2022.105413
NLM
Lumertz MM, Santos STCA dos, Guazzelli PRU, Oliveira CMR, Aguiar ML de, Monteiro JRB de A. Performance-based design of pseudo-sliding mode speed control for electrical motor drives [Internet]. Control Engineering Practice. 2023 ; 132 1-8.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.conengprac.2022.105413
Vancouver
Lumertz MM, Santos STCA dos, Guazzelli PRU, Oliveira CMR, Aguiar ML de, Monteiro JRB de A. Performance-based design of pseudo-sliding mode speed control for electrical motor drives [Internet]. Control Engineering Practice. 2023 ; 132 1-8.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.conengprac.2022.105413
Artigo de periodico
A scale sensitive filtered sub-grid drag model for fluidized gas-particle flows (2023)
Milioli, Christian Léa Coelho da Costa; Milioli, Fernando Eduardo
Fonte: Chemical Engineering Science. Unidade: EESC
Assuntos: ENGENHARIA MECÂNICA, PARTÍCULAS (FÍSICA NUCLEAR), FLUIDIZAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MILIOLI, Christian Léa Coelho da Costa e MILIOLI, Fernando Eduardo. A scale sensitive filtered sub-grid drag model for fluidized gas-particle flows. Chemical Engineering Science, v. 267, p. 1-13, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.ces.2022.118266. Acesso em: 29 ago. 2024.
APA
Milioli, C. L. C. da C., & Milioli, F. E. (2023). A scale sensitive filtered sub-grid drag model for fluidized gas-particle flows. Chemical Engineering Science, 267, 1-13. doi:10.1016/j.ces.2022.118266
NLM
Milioli CLC da C, Milioli FE. A scale sensitive filtered sub-grid drag model for fluidized gas-particle flows [Internet]. Chemical Engineering Science. 2023 ; 267 1-13.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.ces.2022.118266
Vancouver
Milioli CLC da C, Milioli FE. A scale sensitive filtered sub-grid drag model for fluidized gas-particle flows [Internet]. Chemical Engineering Science. 2023 ; 267 1-13.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.ces.2022.118266
Artigo de periodico
Novel microporous MgO-based high-temperature thermal insulator (2023)
Salomão, Rafael ; Fernandes, Leandro; Simão, Luiz Carlos
Fonte: Open Ceramics. Unidade: EESC
Assuntos: REFRATÁRIOS, ECONOMIA DE ENERGIA, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SALOMÃO, Rafael e FERNANDES, Leandro e SIMÃO, Luiz Carlos. Novel microporous MgO-based high-temperature thermal insulator. Open Ceramics, v. 16, p. 1-10, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.oceram.2023.100446. Acesso em: 29 ago. 2024.
APA
Salomão, R., Fernandes, L., & Simão, L. C. (2023). Novel microporous MgO-based high-temperature thermal insulator. Open Ceramics, 16, 1-10. doi:10.1016/j.oceram.2023.100446
NLM
Salomão R, Fernandes L, Simão LC. Novel microporous MgO-based high-temperature thermal insulator [Internet]. Open Ceramics. 2023 ; 16 1-10.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.oceram.2023.100446
Vancouver
Salomão R, Fernandes L, Simão LC. Novel microporous MgO-based high-temperature thermal insulator [Internet]. Open Ceramics. 2023 ; 16 1-10.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.oceram.2023.100446
Artigo de periodico
Production of recombinant lytic polysaccharide monooxygenases and evaluation effect of its addition into Aspergillus fumigatus var. niveus cocktail for sugarcane bagasse saccharification (2023)
Gonçalves, Aline Larissa; Cunha, Paula Macedo; Lima, Awana Silva ; Santos, Julio Cesar dos ; Segato, Fernando
Fonte: Biochimica et biophysica acta-proteins and proteomics.
Assuntos: BIOTECNOLOGIA, ENZIMAS, BAGAÇOS, CANA-DE-AÇÚCAR
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GONÇALVES, Aline Larissa et al. Production of recombinant lytic polysaccharide monooxygenases and evaluation effect of its addition into Aspergillus fumigatus var. niveus cocktail for sugarcane bagasse saccharification. Biochimica et biophysica acta-proteins and proteomics, v. 1871, n. 4, p. 1-12, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.bbapap.2023.140919. Acesso em: 29 ago. 2024.
APA
Gonçalves, A. L., Cunha, P. M., Lima, A. S., Santos, J. C. dos, & Segato, F. (2023). Production of recombinant lytic polysaccharide monooxygenases and evaluation effect of its addition into Aspergillus fumigatus var. niveus cocktail for sugarcane bagasse saccharification. Biochimica et biophysica acta-proteins and proteomics, 1871( 4), 1-12. doi:10.1016/j.bbapap.2023.140919
NLM
Gonçalves AL, Cunha PM, Lima AS, Santos JC dos, Segato F. Production of recombinant lytic polysaccharide monooxygenases and evaluation effect of its addition into Aspergillus fumigatus var. niveus cocktail for sugarcane bagasse saccharification [Internet]. Biochimica et biophysica acta-proteins and proteomics. 2023 ; 1871( 4): 1-12.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.bbapap.2023.140919
Vancouver
Gonçalves AL, Cunha PM, Lima AS, Santos JC dos, Segato F. Production of recombinant lytic polysaccharide monooxygenases and evaluation effect of its addition into Aspergillus fumigatus var. niveus cocktail for sugarcane bagasse saccharification [Internet]. Biochimica et biophysica acta-proteins and proteomics. 2023 ; 1871( 4): 1-12.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.bbapap.2023.140919
Artigo de periodico
A database of installation monitoring and uplift load tests of round-shaft helical anchors in Brazil (2023)
Silva, Bruno de Oliveira da; Tsuha, Cristina de Hollanda Cavalcanti ; Santos Filho, João Manoel Sampaio Mathias dos
Fonte: Probabilistic Engineering Mechanics. Unidade: EESC
Assuntos: ESTACAS, ANCORAGEM, GEOTECNIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Bruno de Oliveira da e TSUHA, Cristina de Hollanda Cavalcanti e SANTOS FILHO, João Manoel Sampaio Mathias dos. A database of installation monitoring and uplift load tests of round-shaft helical anchors in Brazil. Probabilistic Engineering Mechanics, v. 71, p. 1-8, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.probengmech.2022.103378. Acesso em: 29 ago. 2024.
APA
Silva, B. de O. da, Tsuha, C. de H. C., & Santos Filho, J. M. S. M. dos. (2023). A database of installation monitoring and uplift load tests of round-shaft helical anchors in Brazil. Probabilistic Engineering Mechanics, 71, 1-8. doi:10.1016/j.probengmech.2022.103378
NLM
Silva B de O da, Tsuha C de HC, Santos Filho JMSM dos. A database of installation monitoring and uplift load tests of round-shaft helical anchors in Brazil [Internet]. Probabilistic Engineering Mechanics. 2023 ; 71 1-8.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.probengmech.2022.103378
Vancouver
Silva B de O da, Tsuha C de HC, Santos Filho JMSM dos. A database of installation monitoring and uplift load tests of round-shaft helical anchors in Brazil [Internet]. Probabilistic Engineering Mechanics. 2023 ; 71 1-8.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.probengmech.2022.103378
Artigo de periodico
Hyperstatic and redundancy thresholds in truss topology optimization considering progressive collapse due to aleatory and epistemic uncertainties (2023)
Silva, Lucas Araújo Rodrigues da; Torii, André Jacomel; Beck, André Teófilo
Fonte: Probabilistic Engineering Mechanics. Unidade: EESC
Assuntos: TOPOLOGIA, ESTRUTURAS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Lucas Araújo Rodrigues da e TORII, André Jacomel e BECK, André Teófilo. Hyperstatic and redundancy thresholds in truss topology optimization considering progressive collapse due to aleatory and epistemic uncertainties. Probabilistic Engineering Mechanics, v. 71, p. 1-19, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.probengmech.2022.103384. Acesso em: 29 ago. 2024.
APA
Silva, L. A. R. da, Torii, A. J., & Beck, A. T. (2023). Hyperstatic and redundancy thresholds in truss topology optimization considering progressive collapse due to aleatory and epistemic uncertainties. Probabilistic Engineering Mechanics, 71, 1-19. doi:10.1016/j.probengmech.2022.103384
NLM
Silva LAR da, Torii AJ, Beck AT. Hyperstatic and redundancy thresholds in truss topology optimization considering progressive collapse due to aleatory and epistemic uncertainties [Internet]. Probabilistic Engineering Mechanics. 2023 ; 71 1-19.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.probengmech.2022.103384
Vancouver
Silva LAR da, Torii AJ, Beck AT. Hyperstatic and redundancy thresholds in truss topology optimization considering progressive collapse due to aleatory and epistemic uncertainties [Internet]. Probabilistic Engineering Mechanics. 2023 ; 71 1-19.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.probengmech.2022.103384
Artigo de periodico
Additive manufacturing of calcium carbonate parts through vat-photopolymerization and sintering in carbon dioxide atmosphere (2023)
Morais, Mateus Mota ; Camargo, Italo Leite de ; Colombo, Paolo; Fortulan, Carlos Alberto
Fonte: Open Ceramics. Unidade: EESC
Assuntos: MANUFATURA ADITIVA, SINTERIZAÇÃO, IMPRESSÃO 3-D, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORAIS, Mateus Mota et al. Additive manufacturing of calcium carbonate parts through vat-photopolymerization and sintering in carbon dioxide atmosphere. Open Ceramics, v. 14, p. 1-12, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.oceram.2023.100348. Acesso em: 29 ago. 2024.
APA
Morais, M. M., Camargo, I. L. de, Colombo, P., & Fortulan, C. A. (2023). Additive manufacturing of calcium carbonate parts through vat-photopolymerization and sintering in carbon dioxide atmosphere. Open Ceramics, 14, 1-12. doi:10.1016/j.oceram.2023.100348
NLM
Morais MM, Camargo IL de, Colombo P, Fortulan CA. Additive manufacturing of calcium carbonate parts through vat-photopolymerization and sintering in carbon dioxide atmosphere [Internet]. Open Ceramics. 2023 ; 14 1-12.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.oceram.2023.100348
Vancouver
Morais MM, Camargo IL de, Colombo P, Fortulan CA. Additive manufacturing of calcium carbonate parts through vat-photopolymerization and sintering in carbon dioxide atmosphere [Internet]. Open Ceramics. 2023 ; 14 1-12.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.oceram.2023.100348
Artigo de periodico
Computational procedure for simulating stall process of reciprocating compressors (2023)
Falcetti, Eduardo Postingel; Tibiriçá, Cristiano Bigonha ; Cabezas Gómez, Luben
Fonte: International Journal of Refrigeration. Unidade: EESC
Assuntos: ENGENHARIA MECÂNICA, COMPRESSORES PNEUMÁTICOS, MOTORES ELÉTRICOS, ALGORITMOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FALCETTI, Eduardo Postingel e TIBIRIÇÁ, Cristiano Bigonha e CABEZAS GÓMEZ, Luben. Computational procedure for simulating stall process of reciprocating compressors. International Journal of Refrigeration, v. 146, p. 88-99, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.ijrefrig.2022.10.002. Acesso em: 29 ago. 2024.
APA
Falcetti, E. P., Tibiriçá, C. B., & Cabezas Gómez, L. (2023). Computational procedure for simulating stall process of reciprocating compressors. International Journal of Refrigeration, 146, 88-99. doi:10.1016/j.ijrefrig.2022.10.002
NLM
Falcetti EP, Tibiriçá CB, Cabezas Gómez L. Computational procedure for simulating stall process of reciprocating compressors [Internet]. International Journal of Refrigeration. 2023 ; 146 88-99.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.ijrefrig.2022.10.002
Vancouver
Falcetti EP, Tibiriçá CB, Cabezas Gómez L. Computational procedure for simulating stall process of reciprocating compressors [Internet]. International Journal of Refrigeration. 2023 ; 146 88-99.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.ijrefrig.2022.10.002
Artigo de periodico
An impedance-multi-method-based fault location methodology for transmission lines connected to inverter-based resources (2023)
Davi, Moisés Junior Batista Borges; Oleskovicz, Mario ; Lopes, Felipe V
Fonte: International Journal of Electrical Power & Energy Systems. Unidade: EESC
Assuntos: TRANSMISSÃO DE ENERGIA ELÉTRICA, FALHA, IMPEDÂNCIA ELÉTRICA, ENGENHARIA ELÉTRICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DAVI, Moisés Junior Batista Borges e OLESKOVICZ, Mario e LOPES, Felipe V. An impedance-multi-method-based fault location methodology for transmission lines connected to inverter-based resources. International Journal of Electrical Power & Energy Systems, v. 154, p. 1-10, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.ijepes.2023.109466. Acesso em: 29 ago. 2024.
APA
Davi, M. J. B. B., Oleskovicz, M., & Lopes, F. V. (2023). An impedance-multi-method-based fault location methodology for transmission lines connected to inverter-based resources. International Journal of Electrical Power & Energy Systems, 154, 1-10. doi:10.1016/j.ijepes.2023.109466
NLM
Davi MJBB, Oleskovicz M, Lopes FV. An impedance-multi-method-based fault location methodology for transmission lines connected to inverter-based resources [Internet]. International Journal of Electrical Power & Energy Systems. 2023 ; 154 1-10.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.ijepes.2023.109466
Vancouver
Davi MJBB, Oleskovicz M, Lopes FV. An impedance-multi-method-based fault location methodology for transmission lines connected to inverter-based resources [Internet]. International Journal of Electrical Power & Energy Systems. 2023 ; 154 1-10.[citado 2024 ago. 29 ] Available from: https://doi.org/10.1016/j.ijepes.2023.109466

Unidades USP

ReP

Filtros

Tipo de material

Unidades USP

Departamento

Autores

Autores USP

Ano de publicação

Assuntos

Título da fonte

Nome do evento

Agência de fomento

Indexado em

Afiliação dos autores externos normalizada

Afiliação dos autores externos não normalizada

País das instituições de afiliação dos autores externos