ReP USP - Resultado da busca

Artigo de periodico
A concurrent fibre orientation and topology optimisation framework for 3D-printed fibre-reinforced composites (2023)
Almeida Júnior, José Humberto Santos; Christoff, Bruno Guilherme; Tita, Volnei ; St-Pierre, Luc
Source: Composites Science and Technology. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, IMPRESSÃO 3-D, TOPOLOGIA, MANUFATURA ADITIVA, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALMEIDA JÚNIOR, José Humberto Santos et al. A concurrent fibre orientation and topology optimisation framework for 3D-printed fibre-reinforced composites. Composites Science and Technology, v. 232, p. 1-15, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.compscitech.2022.109872. Acesso em: 27 maio 2024.
APA
Almeida Júnior, J. H. S., Christoff, B. G., Tita, V., & St-Pierre, L. (2023). A concurrent fibre orientation and topology optimisation framework for 3D-printed fibre-reinforced composites. Composites Science and Technology, 232, 1-15. doi:10.1016/j.compscitech.2022.109872
NLM
Almeida Júnior JHS, Christoff BG, Tita V, St-Pierre L. A concurrent fibre orientation and topology optimisation framework for 3D-printed fibre-reinforced composites [Internet]. Composites Science and Technology. 2023 ; 232 1-15.[citado 2024 maio 27 ] Available from: https://doi.org/10.1016/j.compscitech.2022.109872
Vancouver
Almeida Júnior JHS, Christoff BG, Tita V, St-Pierre L. A concurrent fibre orientation and topology optimisation framework for 3D-printed fibre-reinforced composites [Internet]. Composites Science and Technology. 2023 ; 232 1-15.[citado 2024 maio 27 ] Available from: https://doi.org/10.1016/j.compscitech.2022.109872
Artigo de periodico
Accelerated aging on the compression properties of a green polyurethane foam: experimental and numerical analysis (2023)
Silva, Ênio Henrique Pires da ; Barros, Silvio de ; Vieira, André Ferreira Costa ; Costa, Romeu Rony Cavalcante da ; Ribeiro, Marcelo Leite
Source: Polymers. Unidade: EESC
Subjects: SUSTENTABILIDADE, POLÍMEROS (MATERIAIS), ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Ênio Henrique Pires da et al. Accelerated aging on the compression properties of a green polyurethane foam: experimental and numerical analysis. Polymers, v. 15, n. 7, p. 1-18, 2023Tradução . . Disponível em: https://doi.org/10.3390/polym15071784. Acesso em: 27 maio 2024.
APA
Silva, Ê. H. P. da, Barros, S. de, Vieira, A. F. C., Costa, R. R. C. da, & Ribeiro, M. L. (2023). Accelerated aging on the compression properties of a green polyurethane foam: experimental and numerical analysis. Polymers, 15( 7), 1-18. doi:10.3390/polym15071784
NLM
Silva ÊHP da, Barros S de, Vieira AFC, Costa RRC da, Ribeiro ML. Accelerated aging on the compression properties of a green polyurethane foam: experimental and numerical analysis [Internet]. Polymers. 2023 ; 15( 7): 1-18.[citado 2024 maio 27 ] Available from: https://doi.org/10.3390/polym15071784
Vancouver
Silva ÊHP da, Barros S de, Vieira AFC, Costa RRC da, Ribeiro ML. Accelerated aging on the compression properties of a green polyurethane foam: experimental and numerical analysis [Internet]. Polymers. 2023 ; 15( 7): 1-18.[citado 2024 maio 27 ] Available from: https://doi.org/10.3390/polym15071784
Artigo de periodico
Influence of knots on the adhesion of wood from young Eucalyptus grandis plantations (2023)
Balboni, Bruno Monteiro ; Wessels, C. Brand ; Ribeiro, Marcelo Leite ; Batista, Alessandra Silva ; Garcia, José Nivaldo
Source: Wood Material Science & Engineering. Unidades: EESC, ESALQ
Subjects: MADEIRA, ADESIVOS, LAMINADOS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BALBONI, Bruno Monteiro et al. Influence of knots on the adhesion of wood from young Eucalyptus grandis plantations. Wood Material Science & Engineering, p. 1-9, 2023Tradução . . Disponível em: https://doi.org/10.1080/17480272.2023.2208094. Acesso em: 27 maio 2024.
APA
Balboni, B. M., Wessels, C. B., Ribeiro, M. L., Batista, A. S., & Garcia, J. N. (2023). Influence of knots on the adhesion of wood from young Eucalyptus grandis plantations. Wood Material Science & Engineering, 1-9. doi:10.1080/17480272.2023.2208094
NLM
Balboni BM, Wessels CB, Ribeiro ML, Batista AS, Garcia JN. Influence of knots on the adhesion of wood from young Eucalyptus grandis plantations [Internet]. Wood Material Science & Engineering. 2023 ; 1-9.[citado 2024 maio 27 ] Available from: https://doi.org/10.1080/17480272.2023.2208094
Vancouver
Balboni BM, Wessels CB, Ribeiro ML, Batista AS, Garcia JN. Influence of knots on the adhesion of wood from young Eucalyptus grandis plantations [Internet]. Wood Material Science & Engineering. 2023 ; 1-9.[citado 2024 maio 27 ] Available from: https://doi.org/10.1080/17480272.2023.2208094
Artigo de periodico
Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling (2023)
Amaral, Ana Carolina Godoy; De Marqui Júnior, Carlos ; Silveira, Marcos
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: MOBILIDADE URBANA, PANDEMIAS, COVID-19, SISTEMAS DINÂMICOS, AEROELASTICIDADE DE AERONAVES, PIEZOELETRICIDADE, ENERGIA, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AMARAL, Ana Carolina Godoy e DE MARQUI JÚNIOR, Carlos e SILVEIRA, Marcos. Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 45, p. 1-14, 2023Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03783-6. Acesso em: 27 maio 2024.
APA
Amaral, A. C. G., De Marqui Júnior, C., & Silveira, M. (2023). Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 1-14. doi:10.1007/s40430-022-03783-6
NLM
Amaral ACG, De Marqui Júnior C, Silveira M. Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-14.[citado 2024 maio 27 ] Available from: https://doi.org/10.1007/s40430-022-03783-6
Vancouver
Amaral ACG, De Marqui Júnior C, Silveira M. Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-14.[citado 2024 maio 27 ] Available from: https://doi.org/10.1007/s40430-022-03783-6
Artigo de periodico
A simple methodology based on numerical analysis for the drying curve design of a castable lined steel ladle (2023)
Cunha, T. M.; Moreira, M. H.; Santos, M. F.; Angélico, Ricardo Afonso ; Pandolfelli, V. C.
Source: Open Ceramics. Unidade: EESC
Subjects: ISOLAMENTO TÉRMICO, EFICIÊNCIA ENERGÉTICA, REFRATÁRIOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CUNHA, T. M. et al. A simple methodology based on numerical analysis for the drying curve design of a castable lined steel ladle. Open Ceramics, v. 13, p. 1-10, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.oceram.2023.100330. Acesso em: 27 maio 2024.
APA
Cunha, T. M., Moreira, M. H., Santos, M. F., Angélico, R. A., & Pandolfelli, V. C. (2023). A simple methodology based on numerical analysis for the drying curve design of a castable lined steel ladle. Open Ceramics, 13, 1-10. doi:10.1016/j.oceram.2023.100330
NLM
Cunha TM, Moreira MH, Santos MF, Angélico RA, Pandolfelli VC. A simple methodology based on numerical analysis for the drying curve design of a castable lined steel ladle [Internet]. Open Ceramics. 2023 ; 13 1-10.[citado 2024 maio 27 ] Available from: https://doi.org/10.1016/j.oceram.2023.100330
Vancouver
Cunha TM, Moreira MH, Santos MF, Angélico RA, Pandolfelli VC. A simple methodology based on numerical analysis for the drying curve design of a castable lined steel ladle [Internet]. Open Ceramics. 2023 ; 13 1-10.[citado 2024 maio 27 ] Available from: https://doi.org/10.1016/j.oceram.2023.100330
Artigo de periodico
Influence of the geometric parameters on the effective properties of piezoelectric composite sensors using real measurements and a new RVE (2023)
Silva, Matheus Rodrigues; Tita, Volnei ; Medeiros, Ricardo de
Source: Composite Structures. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, PIEZOELETRICIDADE, HOMOGENEIZAÇÃO, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Matheus Rodrigues e TITA, Volnei e MEDEIROS, Ricardo de. Influence of the geometric parameters on the effective properties of piezoelectric composite sensors using real measurements and a new RVE. Composite Structures, v. 303, p. 1-12, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.compstruct.2022.116292. Acesso em: 27 maio 2024.
APA
Silva, M. R., Tita, V., & Medeiros, R. de. (2023). Influence of the geometric parameters on the effective properties of piezoelectric composite sensors using real measurements and a new RVE. Composite Structures, 303, 1-12. doi:10.1016/j.compstruct.2022.116292
NLM
Silva MR, Tita V, Medeiros R de. Influence of the geometric parameters on the effective properties of piezoelectric composite sensors using real measurements and a new RVE [Internet]. Composite Structures. 2023 ; 303 1-12.[citado 2024 maio 27 ] Available from: https://doi.org/10.1016/j.compstruct.2022.116292
Vancouver
Silva MR, Tita V, Medeiros R de. Influence of the geometric parameters on the effective properties of piezoelectric composite sensors using real measurements and a new RVE [Internet]. Composite Structures. 2023 ; 303 1-12.[citado 2024 maio 27 ] Available from: https://doi.org/10.1016/j.compstruct.2022.116292
Artigo de periodico
Data reduction methods in the fatigue analysis of the Double Cantilever Beam, Part II: evaluation and case studies (2023)
Marques, Denys; Madureira, Fernando; Tita, Volnei
Source: Composite Structures. Unidade: EESC
Subjects: FADIGA DOS MATERIAIS, JUNTAS ESTRUTURAIS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARQUES, Denys e MADUREIRA, Fernando e TITA, Volnei. Data reduction methods in the fatigue analysis of the Double Cantilever Beam, Part II: evaluation and case studies. Composite Structures, v. 324, p. 1-11, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.compstruct.2023.117528. Acesso em: 27 maio 2024.
APA
Marques, D., Madureira, F., & Tita, V. (2023). Data reduction methods in the fatigue analysis of the Double Cantilever Beam, Part II: evaluation and case studies. Composite Structures, 324, 1-11. doi:10.1016/j.compstruct.2023.117528
NLM
Marques D, Madureira F, Tita V. Data reduction methods in the fatigue analysis of the Double Cantilever Beam, Part II: evaluation and case studies [Internet]. Composite Structures. 2023 ; 324 1-11.[citado 2024 maio 27 ] Available from: https://doi.org/10.1016/j.compstruct.2023.117528
Vancouver
Marques D, Madureira F, Tita V. Data reduction methods in the fatigue analysis of the Double Cantilever Beam, Part II: evaluation and case studies [Internet]. Composite Structures. 2023 ; 324 1-11.[citado 2024 maio 27 ] Available from: https://doi.org/10.1016/j.compstruct.2023.117528
Artigo de periodico
Multiscale embedded models to determine effective mechanical properties of composite materials: asymptotic Homogenization Method combined to Finite Element Method (2022)
Christoff, Bruno Guilherme; Brito Santana, Humberto; Talreja, Ramesh; Tita, Volnei
Source: Composites Part C: Open Access. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, MATERIAIS COMPÓSITOS, HOMOGENEIZAÇÃO, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CHRISTOFF, Bruno Guilherme et al. Multiscale embedded models to determine effective mechanical properties of composite materials: asymptotic Homogenization Method combined to Finite Element Method. Composites Part C: Open Access, p. 1-14, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.jcomc.2022.100303. Acesso em: 27 maio 2024.
APA
Christoff, B. G., Brito Santana, H., Talreja, R., & Tita, V. (2022). Multiscale embedded models to determine effective mechanical properties of composite materials: asymptotic Homogenization Method combined to Finite Element Method. Composites Part C: Open Access, 1-14. doi:10.1016/j.jcomc.2022.100303
NLM
Christoff BG, Brito Santana H, Talreja R, Tita V. Multiscale embedded models to determine effective mechanical properties of composite materials: asymptotic Homogenization Method combined to Finite Element Method [Internet]. Composites Part C: Open Access. 2022 ; 1-14.[citado 2024 maio 27 ] Available from: https://doi.org/10.1016/j.jcomc.2022.100303
Vancouver
Christoff BG, Brito Santana H, Talreja R, Tita V. Multiscale embedded models to determine effective mechanical properties of composite materials: asymptotic Homogenization Method combined to Finite Element Method [Internet]. Composites Part C: Open Access. 2022 ; 1-14.[citado 2024 maio 27 ] Available from: https://doi.org/10.1016/j.jcomc.2022.100303
Artigo de periodico
Experimental characterization and numerical modeling of the corrosion effect on the mechanical properties of the biodegradable magnesium alloy WE43 for orthopedic applications (2022)
Saconi, Felipe; Hincapie Diaz, Geraldine; Vieira, Andre Costa; Ribeiro, Marcelo Leite
Source: Materials. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, LIGAS METÁLICAS, CORROSÃO, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SACONI, Felipe et al. Experimental characterization and numerical modeling of the corrosion effect on the mechanical properties of the biodegradable magnesium alloy WE43 for orthopedic applications. Materials, v. 15, n. 20, p. 1-20, 2022Tradução . . Disponível em: https://doi.org/10.3390/ma15207164. Acesso em: 27 maio 2024.
APA
Saconi, F., Hincapie Diaz, G., Vieira, A. C., & Ribeiro, M. L. (2022). Experimental characterization and numerical modeling of the corrosion effect on the mechanical properties of the biodegradable magnesium alloy WE43 for orthopedic applications. Materials, 15( 20), 1-20. doi:10.3390/ma15207164
NLM
Saconi F, Hincapie Diaz G, Vieira AC, Ribeiro ML. Experimental characterization and numerical modeling of the corrosion effect on the mechanical properties of the biodegradable magnesium alloy WE43 for orthopedic applications [Internet]. Materials. 2022 ; 15( 20): 1-20.[citado 2024 maio 27 ] Available from: https://doi.org/10.3390/ma15207164
Vancouver
Saconi F, Hincapie Diaz G, Vieira AC, Ribeiro ML. Experimental characterization and numerical modeling of the corrosion effect on the mechanical properties of the biodegradable magnesium alloy WE43 for orthopedic applications [Internet]. Materials. 2022 ; 15( 20): 1-20.[citado 2024 maio 27 ] Available from: https://doi.org/10.3390/ma15207164
Artigo de periodico
Sensitivity and uncertainty analysis for structural healthmonitoring with crack propagation under random loads: anumerical framework in the frequency domain (2022)
Marques, Denys Eduardo Teixeira; Vandepitte, Dirk; Tita, Volnei
Source: Fatigue & Fracture of Engineering Materials and Structures. Unidade: EESC
Subjects: FADIGA DAS ESTRUTURAS, ESTRUTURAS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARQUES, Denys Eduardo Teixeira e VANDEPITTE, Dirk e TITA, Volnei. Sensitivity and uncertainty analysis for structural healthmonitoring with crack propagation under random loads: anumerical framework in the frequency domain. Fatigue & Fracture of Engineering Materials and Structures, p. 1-16, 2022Tradução . . Disponível em: https://doi.org/10.1111/ffe.13853. Acesso em: 27 maio 2024.
APA
Marques, D. E. T., Vandepitte, D., & Tita, V. (2022). Sensitivity and uncertainty analysis for structural healthmonitoring with crack propagation under random loads: anumerical framework in the frequency domain. Fatigue & Fracture of Engineering Materials and Structures, 1-16. doi:10.1111/ffe.13853
NLM
Marques DET, Vandepitte D, Tita V. Sensitivity and uncertainty analysis for structural healthmonitoring with crack propagation under random loads: anumerical framework in the frequency domain [Internet]. Fatigue & Fracture of Engineering Materials and Structures. 2022 ; 1-16.[citado 2024 maio 27 ] Available from: https://doi.org/10.1111/ffe.13853
Vancouver
Marques DET, Vandepitte D, Tita V. Sensitivity and uncertainty analysis for structural healthmonitoring with crack propagation under random loads: anumerical framework in the frequency domain [Internet]. Fatigue & Fracture of Engineering Materials and Structures. 2022 ; 1-16.[citado 2024 maio 27 ] Available from: https://doi.org/10.1111/ffe.13853
Trabalho de evento
Compliance methods for bonded joints: part I - investigation of the standardized methods to obtain the strain energy release rate for mode I (2022)
Madureira, Fernando ; Silva, Lucas Filipe Martins da ; Tita, Volnei
Source: The Journal of Adhesion. Unidade: EESC
Subjects: JUNTAS ESTRUTURAIS, VIBRAÇÕES, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MADUREIRA, Fernando e SILVA, Lucas Filipe Martins da e TITA, Volnei. Compliance methods for bonded joints: part I - investigation of the standardized methods to obtain the strain energy release rate for mode I. 2022, Anais.. New York, NY, USA: Taylor & Francis, 2022. p. 1-22. Disponível em: https://doi.org/10.1080/00218464.2022.2144731. Acesso em: 27 maio 2024.
APA
Madureira, F., Silva, L. F. M. da, & Tita, V. (2022). Compliance methods for bonded joints: part I - investigation of the standardized methods to obtain the strain energy release rate for mode I. In The Journal of Adhesion (p. 1-22). New York, NY, USA: Taylor & Francis. doi:10.1080/00218464.2022.2144731
NLM
Madureira F, Silva LFM da, Tita V. Compliance methods for bonded joints: part I - investigation of the standardized methods to obtain the strain energy release rate for mode I [Internet]. The Journal of Adhesion. 2022 ; 1-22.[citado 2024 maio 27 ] Available from: https://doi.org/10.1080/00218464.2022.2144731
Vancouver
Madureira F, Silva LFM da, Tita V. Compliance methods for bonded joints: part I - investigation of the standardized methods to obtain the strain energy release rate for mode I [Internet]. The Journal of Adhesion. 2022 ; 1-22.[citado 2024 maio 27 ] Available from: https://doi.org/10.1080/00218464.2022.2144731
Artigo de periodico
A finite element unified formulation for composite laminates in bending considering progressive damage (2022)
Ferreira, Gregório Felipe Oliveira; Almeida Júnior, José Humberto Santos; Ribeiro, Marcelo Leite ; Ferreira, Antonio J. M.; Tita, Volnei
Source: Thin-Walled Structures. Unidade: EESC
Subjects: MECÂNICA DO DANO, MÉTODO DOS ELEMENTOS FINITOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERREIRA, Gregório Felipe Oliveira et al. A finite element unified formulation for composite laminates in bending considering progressive damage. Thin-Walled Structures, v. 172, p. 1-13, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.tws.2021.108864. Acesso em: 27 maio 2024.
APA
Ferreira, G. F. O., Almeida Júnior, J. H. S., Ribeiro, M. L., Ferreira, A. J. M., & Tita, V. (2022). A finite element unified formulation for composite laminates in bending considering progressive damage. Thin-Walled Structures, 172, 1-13. doi:10.1016/j.tws.2021.108864
NLM
Ferreira GFO, Almeida Júnior JHS, Ribeiro ML, Ferreira AJM, Tita V. A finite element unified formulation for composite laminates in bending considering progressive damage [Internet]. Thin-Walled Structures. 2022 ; 172 1-13.[citado 2024 maio 27 ] Available from: https://doi.org/10.1016/j.tws.2021.108864
Vancouver
Ferreira GFO, Almeida Júnior JHS, Ribeiro ML, Ferreira AJM, Tita V. A finite element unified formulation for composite laminates in bending considering progressive damage [Internet]. Thin-Walled Structures. 2022 ; 172 1-13.[citado 2024 maio 27 ] Available from: https://doi.org/10.1016/j.tws.2021.108864
Trabalho de evento
Fault-tolerant architecture and implementation of a distributed control system using containers (2022)
Tamanaka, Gustavo Teruo Bernardino ; Aroca, Rafael Vidal ; Caurin, Glauco Augusto de Paula
Source: Proceedings. Conference titles: Latin American Robotics Symposium - LARS. Unidade: EESC
Subjects: SISTEMAS EMBUTIDOS, SISTEMAS DE CONTROLE, INTERNET DAS COISAS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TAMANAKA, Gustavo Teruo Bernardino e AROCA, Rafael Vidal e CAURIN, Glauco Augusto de Paula. Fault-tolerant architecture and implementation of a distributed control system using containers. 2022, Anais.. Piscataway, NJ, USA: IEEE, 2022. Disponível em: https://doi.org/10.1109/LARS/SBR/WRE56824.2022.9995745. Acesso em: 27 maio 2024.
APA
Tamanaka, G. T. B., Aroca, R. V., & Caurin, G. A. de P. (2022). Fault-tolerant architecture and implementation of a distributed control system using containers. In Proceedings. Piscataway, NJ, USA: IEEE. doi:10.1109/LARS/SBR/WRE56824.2022.9995745
NLM
Tamanaka GTB, Aroca RV, Caurin GA de P. Fault-tolerant architecture and implementation of a distributed control system using containers [Internet]. Proceedings. 2022 ;[citado 2024 maio 27 ] Available from: https://doi.org/10.1109/LARS/SBR/WRE56824.2022.9995745
Vancouver
Tamanaka GTB, Aroca RV, Caurin GA de P. Fault-tolerant architecture and implementation of a distributed control system using containers [Internet]. Proceedings. 2022 ;[citado 2024 maio 27 ] Available from: https://doi.org/10.1109/LARS/SBR/WRE56824.2022.9995745
Trabalho de evento
Crack pattern of a composite model material submitted to a temperature increase assisted by dic (2021)
Zago, Igor Paganotto; Canto, Rodrigo Bresciani; Angélico, Ricardo Afonso
Source: Proceedings of BCCM 5. Conference titles: Brazilian Conference on Composite Materials - BCCM. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, TEMPERATURA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ZAGO, Igor Paganotto e CANTO, Rodrigo Bresciani e ANGÉLICO, Ricardo Afonso. Crack pattern of a composite model material submitted to a temperature increase assisted by dic. 2021, Anais.. São Carlos, SP: EESC/USP, 2021. Disponível em: https://repositorio.usp.br/directbitstream/9d542f07-24d2-469b-afe2-f9eb31247ae0/2916-8123-1-PB.pdf. Acesso em: 27 maio 2024.
APA
Zago, I. P., Canto, R. B., & Angélico, R. A. (2021). Crack pattern of a composite model material submitted to a temperature increase assisted by dic. In Proceedings of BCCM 5. São Carlos, SP: EESC/USP. Recuperado de https://repositorio.usp.br/directbitstream/9d542f07-24d2-469b-afe2-f9eb31247ae0/2916-8123-1-PB.pdf
NLM
Zago IP, Canto RB, Angélico RA. Crack pattern of a composite model material submitted to a temperature increase assisted by dic [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 maio 27 ] Available from: https://repositorio.usp.br/directbitstream/9d542f07-24d2-469b-afe2-f9eb31247ae0/2916-8123-1-PB.pdf
Vancouver
Zago IP, Canto RB, Angélico RA. Crack pattern of a composite model material submitted to a temperature increase assisted by dic [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 maio 27 ] Available from: https://repositorio.usp.br/directbitstream/9d542f07-24d2-469b-afe2-f9eb31247ae0/2916-8123-1-PB.pdf
Trabalho de evento
Kriging surrogate model applied to analyze the dynamic response of composite structures (2021)
Menezes, Vanessa Guimaraes Soares de; Possenti, Kleison Antonio; Souza, Luiz Fernando dos Santos; Tita, Volnei ; Medeiros, Ricardo de
Source: Proceedings of BCCM 5. Conference titles: Brazilian Conference on Composite Materials - BCCM. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, KRIGAGEM, VIBRAÇÕES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MENEZES, Vanessa Guimaraes Soares de et al. Kriging surrogate model applied to analyze the dynamic response of composite structures. 2021, Anais.. São Carlos, SP: EESC/USP, 2021. Disponível em: https://repositorio.usp.br/directbitstream/7e59a445-2981-486f-bc58-8c34933fb9da/3024-8219-1-PB.pdf. Acesso em: 27 maio 2024.
APA
Menezes, V. G. S. de, Possenti, K. A., Souza, L. F. dos S., Tita, V., & Medeiros, R. de. (2021). Kriging surrogate model applied to analyze the dynamic response of composite structures. In Proceedings of BCCM 5. São Carlos, SP: EESC/USP. Recuperado de https://repositorio.usp.br/directbitstream/7e59a445-2981-486f-bc58-8c34933fb9da/3024-8219-1-PB.pdf
NLM
Menezes VGS de, Possenti KA, Souza LF dos S, Tita V, Medeiros R de. Kriging surrogate model applied to analyze the dynamic response of composite structures [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 maio 27 ] Available from: https://repositorio.usp.br/directbitstream/7e59a445-2981-486f-bc58-8c34933fb9da/3024-8219-1-PB.pdf
Vancouver
Menezes VGS de, Possenti KA, Souza LF dos S, Tita V, Medeiros R de. Kriging surrogate model applied to analyze the dynamic response of composite structures [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 maio 27 ] Available from: https://repositorio.usp.br/directbitstream/7e59a445-2981-486f-bc58-8c34933fb9da/3024-8219-1-PB.pdf
Trabalho de evento
On the use of asymptotic homogenization to predict the coupled components of the effective constitutive matrix of laminated composites (2021)
Christoff, Bruno Guilherme; Almeida Junior, Humberto; Talreja, Ramesh; Rodríguez Ramos, Reinaldo; Ribeiro, Marcelo Leite ; Tita, Volnei
Source: Proceedings of BCCM 5. Conference titles: Brazilian Conference on Composite Materials - BCCM. Unidade: EESC
Assunto: MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CHRISTOFF, Bruno Guilherme et al. On the use of asymptotic homogenization to predict the coupled components of the effective constitutive matrix of laminated composites. 2021, Anais.. São Carlos, SP: EESC/USP, 2021. Disponível em: https://repositorio.usp.br/directbitstream/436d35b3-d81d-4242-ba54-2c6e78f533ae/2979-8134-1-PB.pdf. Acesso em: 27 maio 2024.
APA
Christoff, B. G., Almeida Junior, H., Talreja, R., Rodríguez Ramos, R., Ribeiro, M. L., & Tita, V. (2021). On the use of asymptotic homogenization to predict the coupled components of the effective constitutive matrix of laminated composites. In Proceedings of BCCM 5. São Carlos, SP: EESC/USP. Recuperado de https://repositorio.usp.br/directbitstream/436d35b3-d81d-4242-ba54-2c6e78f533ae/2979-8134-1-PB.pdf
NLM
Christoff BG, Almeida Junior H, Talreja R, Rodríguez Ramos R, Ribeiro ML, Tita V. On the use of asymptotic homogenization to predict the coupled components of the effective constitutive matrix of laminated composites [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 maio 27 ] Available from: https://repositorio.usp.br/directbitstream/436d35b3-d81d-4242-ba54-2c6e78f533ae/2979-8134-1-PB.pdf
Vancouver
Christoff BG, Almeida Junior H, Talreja R, Rodríguez Ramos R, Ribeiro ML, Tita V. On the use of asymptotic homogenization to predict the coupled components of the effective constitutive matrix of laminated composites [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 maio 27 ] Available from: https://repositorio.usp.br/directbitstream/436d35b3-d81d-4242-ba54-2c6e78f533ae/2979-8134-1-PB.pdf
Trabalho de evento-resumo
Sistema de pulseiras inteligentes para detecção de crise epiléptica (2021)
Kawakami, Rodrigo Kazuo Morishigue; Caurin, Glauco Augusto de Paula ; Polegato, Paulo Henrique
Source: Livro de Resumos Expandidos. Conference titles: Simpósio Internacional de Iniciação Científica e Tecnológica da Universidade de São Paulo - SIICUSP. Unidade: EESC
Subjects: EPILEPSIA, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
KAWAKAMI, Rodrigo Kazuo Morishigue e CAURIN, Glauco Augusto de Paula e POLEGATO, Paulo Henrique. Sistema de pulseiras inteligentes para detecção de crise epiléptica. 2021, Anais.. São Carlos, SP: EESC/USP, 2021. Disponível em: http://soac.eesc.usp.br/index.php/siicusp/29siicusp/paper/viewFile/3391/2149. Acesso em: 27 maio 2024.
APA
Kawakami, R. K. M., Caurin, G. A. de P., & Polegato, P. H. (2021). Sistema de pulseiras inteligentes para detecção de crise epiléptica. In Livro de Resumos Expandidos. São Carlos, SP: EESC/USP. Recuperado de http://soac.eesc.usp.br/index.php/siicusp/29siicusp/paper/viewFile/3391/2149
NLM
Kawakami RKM, Caurin GA de P, Polegato PH. Sistema de pulseiras inteligentes para detecção de crise epiléptica [Internet]. Livro de Resumos Expandidos. 2021 ;[citado 2024 maio 27 ] Available from: http://soac.eesc.usp.br/index.php/siicusp/29siicusp/paper/viewFile/3391/2149
Vancouver
Kawakami RKM, Caurin GA de P, Polegato PH. Sistema de pulseiras inteligentes para detecção de crise epiléptica [Internet]. Livro de Resumos Expandidos. 2021 ;[citado 2024 maio 27 ] Available from: http://soac.eesc.usp.br/index.php/siicusp/29siicusp/paper/viewFile/3391/2149
Trabalho de evento
Unified formulation for composite plate structures: implementation and evaluation (2021)
Ferreira, Gregório Felipe Oliveira; Almeida Junior, Humberto; Ribeiro, Marcelo Leite ; Ferreira, Antonio Joaquim Mendes; Tita, Volnei
Source: Proceedings of BCCM 5. Conference titles: Brazilian Conference on Composite Materials - BCCM. Unidade: EESC
Assunto: MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERREIRA, Gregório Felipe Oliveira et al. Unified formulation for composite plate structures: implementation and evaluation. 2021, Anais.. São Carlos, SP: EESC/USP, 2021. Disponível em: https://repositorio.usp.br/directbitstream/09980f38-aef9-4932-8579-98a0f9bc468e/3032-8274-1-PB.pdf. Acesso em: 27 maio 2024.
APA
Ferreira, G. F. O., Almeida Junior, H., Ribeiro, M. L., Ferreira, A. J. M., & Tita, V. (2021). Unified formulation for composite plate structures: implementation and evaluation. In Proceedings of BCCM 5. São Carlos, SP: EESC/USP. Recuperado de https://repositorio.usp.br/directbitstream/09980f38-aef9-4932-8579-98a0f9bc468e/3032-8274-1-PB.pdf
NLM
Ferreira GFO, Almeida Junior H, Ribeiro ML, Ferreira AJM, Tita V. Unified formulation for composite plate structures: implementation and evaluation [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 maio 27 ] Available from: https://repositorio.usp.br/directbitstream/09980f38-aef9-4932-8579-98a0f9bc468e/3032-8274-1-PB.pdf
Vancouver
Ferreira GFO, Almeida Junior H, Ribeiro ML, Ferreira AJM, Tita V. Unified formulation for composite plate structures: implementation and evaluation [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 maio 27 ] Available from: https://repositorio.usp.br/directbitstream/09980f38-aef9-4932-8579-98a0f9bc468e/3032-8274-1-PB.pdf
Trabalho de evento
An experimental investigation of laminated fiber reinforced composites under shear-after impact conditions (2021)
Souza, Gabriel Sales Candido; Ribeiro, Marcelo Leite ; Tita, Volnei
Source: Proceedings of BCCM 5. Conference titles: Brazilian Conference on Composite Materials - BCCM. Unidade: EESC
Subjects: CISALHAMENTO, LAMINADOS, MATERIAIS COMPÓSITOS DE FIBRAS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUZA, Gabriel Sales Candido e RIBEIRO, Marcelo Leite e TITA, Volnei. An experimental investigation of laminated fiber reinforced composites under shear-after impact conditions. 2021, Anais.. São Carlos, SP: EESC/USP, 2021. Disponível em: https://repositorio.usp.br/directbitstream/7c61d9d5-2515-4e4d-9e64-d152f2bba57c/2928-8021-1-PB.pdf. Acesso em: 27 maio 2024.
APA
Souza, G. S. C., Ribeiro, M. L., & Tita, V. (2021). An experimental investigation of laminated fiber reinforced composites under shear-after impact conditions. In Proceedings of BCCM 5. São Carlos, SP: EESC/USP. Recuperado de https://repositorio.usp.br/directbitstream/7c61d9d5-2515-4e4d-9e64-d152f2bba57c/2928-8021-1-PB.pdf
NLM
Souza GSC, Ribeiro ML, Tita V. An experimental investigation of laminated fiber reinforced composites under shear-after impact conditions [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 maio 27 ] Available from: https://repositorio.usp.br/directbitstream/7c61d9d5-2515-4e4d-9e64-d152f2bba57c/2928-8021-1-PB.pdf
Vancouver
Souza GSC, Ribeiro ML, Tita V. An experimental investigation of laminated fiber reinforced composites under shear-after impact conditions [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 maio 27 ] Available from: https://repositorio.usp.br/directbitstream/7c61d9d5-2515-4e4d-9e64-d152f2bba57c/2928-8021-1-PB.pdf
Trabalho de evento
Analysis of delamination of composite laminates via XFEM based on the layerwise displacement theory and cohesive zone method (2021)
Santos, Matheus Vilar Mota; Sartorato, Murilo; Tita, Volnei ; Ribeiro, Marcelo Leite
Source: Proceedings of BCCM 5. Conference titles: Brazilian Conference on Composite Materials - BCCM. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, MATERIAIS COMPÓSITOS, FALHA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Matheus Vilar Mota et al. Analysis of delamination of composite laminates via XFEM based on the layerwise displacement theory and cohesive zone method. 2021, Anais.. São Carlos, SP: EESC/USP, 2021. Disponível em: https://repositorio.usp.br/directbitstream/da47e720-d64c-4c4d-86eb-227be7723459/2985-8197-1-PB.pdf. Acesso em: 27 maio 2024.
APA
Santos, M. V. M., Sartorato, M., Tita, V., & Ribeiro, M. L. (2021). Analysis of delamination of composite laminates via XFEM based on the layerwise displacement theory and cohesive zone method. In Proceedings of BCCM 5. São Carlos, SP: EESC/USP. Recuperado de https://repositorio.usp.br/directbitstream/da47e720-d64c-4c4d-86eb-227be7723459/2985-8197-1-PB.pdf
NLM
Santos MVM, Sartorato M, Tita V, Ribeiro ML. Analysis of delamination of composite laminates via XFEM based on the layerwise displacement theory and cohesive zone method [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 maio 27 ] Available from: https://repositorio.usp.br/directbitstream/da47e720-d64c-4c4d-86eb-227be7723459/2985-8197-1-PB.pdf
Vancouver
Santos MVM, Sartorato M, Tita V, Ribeiro ML. Analysis of delamination of composite laminates via XFEM based on the layerwise displacement theory and cohesive zone method [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 maio 27 ] Available from: https://repositorio.usp.br/directbitstream/da47e720-d64c-4c4d-86eb-227be7723459/2985-8197-1-PB.pdf

USP Schools

ReP

Filtros

Authors

USP affiliated authors

Date published

Subjects

Source title

Publisher

Conference titles

Countries/Territories

Funding Agencies

Indexado em

Non normalized affiliation

Countries of institutions of collaboration