ReP USP - Resultado da busca

Artigo de periodico
Isolated effects of reverted austenite and precipitates on the mechanical properties of an additive-manufactured 18Ni maraging steel (2025)
Conde, Fabio Faria ; Giarola, Joseane Moreira ; Bové, Oriol; Oliveira, J. P.; Nizes, Alisson; Jardini, André; Fonseca, Eduardo Bertoni da ; Oliveira, Marcelo Falcão de ; Avila, Julian
Fonte: Journal of Materials Science. Unidade: EESC
Assuntos: AÇO, MANUFATURA ADITIVA, METALURGIA FÍSICA, TENACIDADE DOS MATERIAIS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CONDE, Fabio Faria et al. Isolated effects of reverted austenite and precipitates on the mechanical properties of an additive-manufactured 18Ni maraging steel. Journal of Materials Science, v. 60, p. 13671-13692, 2025Tradução . . Disponível em: http://dx.doi.org/10.1007/s10853-025-11221-w. Acesso em: 30 nov. 2025.
APA
Conde, F. F., Giarola, J. M., Bové, O., Oliveira, J. P., Nizes, A., Jardini, A., et al. (2025). Isolated effects of reverted austenite and precipitates on the mechanical properties of an additive-manufactured 18Ni maraging steel. Journal of Materials Science, 60, 13671-13692. doi:10.1007/s10853-025-11221-w
NLM
Conde FF, Giarola JM, Bové O, Oliveira JP, Nizes A, Jardini A, Fonseca EB da, Oliveira MF de, Avila J. Isolated effects of reverted austenite and precipitates on the mechanical properties of an additive-manufactured 18Ni maraging steel [Internet]. Journal of Materials Science. 2025 ; 60 13671-13692.[citado 2025 nov. 30 ] Available from: http://dx.doi.org/10.1007/s10853-025-11221-w
Vancouver
Conde FF, Giarola JM, Bové O, Oliveira JP, Nizes A, Jardini A, Fonseca EB da, Oliveira MF de, Avila J. Isolated effects of reverted austenite and precipitates on the mechanical properties of an additive-manufactured 18Ni maraging steel [Internet]. Journal of Materials Science. 2025 ; 60 13671-13692.[citado 2025 nov. 30 ] Available from: http://dx.doi.org/10.1007/s10853-025-11221-w
Artigo de periodico
Laser-clad Al-matrix coatings reinforced with icosahedral quasicrystals obtained using Al-Cu-Fe–Cr decagonal quasicrystalline powders on Al substrates (2025)
Rodrigues, A. V.; Ramirez, A. F; Fogagnolo, J. B.; Wolf, Witor
Fonte: Journal of Materials Science. Unidade: EESC
Assuntos: TRATAMENTO DE SUPERFÍCIES, DESGASTE DOS MATERIAIS, REVESTIMENTOS, METAIS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RODRIGUES, A. V. et al. Laser-clad Al-matrix coatings reinforced with icosahedral quasicrystals obtained using Al-Cu-Fe–Cr decagonal quasicrystalline powders on Al substrates. Journal of Materials Science, v. 60, n. 14, p. 6369-6386, 2025Tradução . . Disponível em: http://dx.doi.org/10.1007/s10853-025-10815-8. Acesso em: 30 nov. 2025.
APA
Rodrigues, A. V., Ramirez, A. F., Fogagnolo, J. B., & Wolf, W. (2025). Laser-clad Al-matrix coatings reinforced with icosahedral quasicrystals obtained using Al-Cu-Fe–Cr decagonal quasicrystalline powders on Al substrates. Journal of Materials Science, 60( 14), 6369-6386. doi:10.1007/s10853-025-10815-8
NLM
Rodrigues AV, Ramirez AF, Fogagnolo JB, Wolf W. Laser-clad Al-matrix coatings reinforced with icosahedral quasicrystals obtained using Al-Cu-Fe–Cr decagonal quasicrystalline powders on Al substrates [Internet]. Journal of Materials Science. 2025 ; 60( 14): 6369-6386.[citado 2025 nov. 30 ] Available from: http://dx.doi.org/10.1007/s10853-025-10815-8
Vancouver
Rodrigues AV, Ramirez AF, Fogagnolo JB, Wolf W. Laser-clad Al-matrix coatings reinforced with icosahedral quasicrystals obtained using Al-Cu-Fe–Cr decagonal quasicrystalline powders on Al substrates [Internet]. Journal of Materials Science. 2025 ; 60( 14): 6369-6386.[citado 2025 nov. 30 ] Available from: http://dx.doi.org/10.1007/s10853-025-10815-8
Artigo de periodico
Formation of icosahedral quasicrystals embedded in an Al-FCC matrix, in a novel Al–Cu–Fe–Cr alloy, after laser remelting (2024)
Rodrigues, A. V.; Ramirez, A. F.; Zepon, G.; Fogagnolo, J.B.; Wolf, W.
Fonte: Journal of Materials Science. Unidade: EESC
Assuntos: CRISTALOGRAFIA, LIGAS METÁLICAS, LASER, MICROSCOPIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RODRIGUES, A. V. et al. Formation of icosahedral quasicrystals embedded in an Al-FCC matrix, in a novel Al–Cu–Fe–Cr alloy, after laser remelting. Journal of Materials Science, v. 59, n. 48, p. 22283-22291, 2024Tradução . . Disponível em: http://dx.doi.org/10.1007/s10853-024-10495-w. Acesso em: 30 nov. 2025.
APA
Rodrigues, A. V., Ramirez, A. F., Zepon, G., Fogagnolo, J. B., & Wolf, W. (2024). Formation of icosahedral quasicrystals embedded in an Al-FCC matrix, in a novel Al–Cu–Fe–Cr alloy, after laser remelting. Journal of Materials Science, 59( 48), 22283-22291. doi:10.1007/s10853-024-10495-w
NLM
Rodrigues AV, Ramirez AF, Zepon G, Fogagnolo JB, Wolf W. Formation of icosahedral quasicrystals embedded in an Al-FCC matrix, in a novel Al–Cu–Fe–Cr alloy, after laser remelting [Internet]. Journal of Materials Science. 2024 ; 59( 48): 22283-22291.[citado 2025 nov. 30 ] Available from: http://dx.doi.org/10.1007/s10853-024-10495-w
Vancouver
Rodrigues AV, Ramirez AF, Zepon G, Fogagnolo JB, Wolf W. Formation of icosahedral quasicrystals embedded in an Al-FCC matrix, in a novel Al–Cu–Fe–Cr alloy, after laser remelting [Internet]. Journal of Materials Science. 2024 ; 59( 48): 22283-22291.[citado 2025 nov. 30 ] Available from: http://dx.doi.org/10.1007/s10853-024-10495-w
Artigo de periodico
Femtosecond-laser selective printing of graphene oxide and PPV on polymeric microstructures (2021)
Paula, Kelly Tasso de; Tomazio, Nathália Beretta ; Salas, Oriana Inés Avila; Otuka, Adriano José Galvani ; Almeida, Juliana Mara Pinto de ; Andrade, Marcelo Barbosa de ; Vieira, Nirton C. S.; Balogh, Débora Terezia ; Mendonça, Cleber Renato
Fonte: Journal of Materials Science. Unidades: IFSC, EESC
Assuntos: LASER, FILMES FINOS, POLÍMEROS (MATERIAIS)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PAULA, Kelly Tasso de et al. Femtosecond-laser selective printing of graphene oxide and PPV on polymeric microstructures. Journal of Materials Science, v. 56, n. 19, p. 11569-11577, 2021Tradução . . Disponível em: https://doi.org/10.1007/s10853-021-06045-3. Acesso em: 30 nov. 2025.
APA
Paula, K. T. de, Tomazio, N. B., Salas, O. I. A., Otuka, A. J. G., Almeida, J. M. P. de, Andrade, M. B. de, et al. (2021). Femtosecond-laser selective printing of graphene oxide and PPV on polymeric microstructures. Journal of Materials Science, 56( 19), 11569-11577. doi:10.1007/s10853-021-06045-3
NLM
Paula KT de, Tomazio NB, Salas OIA, Otuka AJG, Almeida JMP de, Andrade MB de, Vieira NCS, Balogh DT, Mendonça CR. Femtosecond-laser selective printing of graphene oxide and PPV on polymeric microstructures [Internet]. Journal of Materials Science. 2021 ; 56( 19): 11569-11577.[citado 2025 nov. 30 ] Available from: https://doi.org/10.1007/s10853-021-06045-3
Vancouver
Paula KT de, Tomazio NB, Salas OIA, Otuka AJG, Almeida JMP de, Andrade MB de, Vieira NCS, Balogh DT, Mendonça CR. Femtosecond-laser selective printing of graphene oxide and PPV on polymeric microstructures [Internet]. Journal of Materials Science. 2021 ; 56( 19): 11569-11577.[citado 2025 nov. 30 ] Available from: https://doi.org/10.1007/s10853-021-06045-3
Artigo de periodico
TEMPO-oxidized cellulose poly-ionic drawn fiber, a cell support system proof of concept (2021)
Rios, Mariana Alves; Barbugli, Paula Aboud; Iemma, Monica Rosas Costa; Grande, Rafael; Carvalho, Antonio Jose Felix ; Trovatti, Eliane
Fonte: Journal of Materials Science. Unidade: EESC
Assuntos: MEDICINA REGENERATIVA, BIOMATERIAIS, BIOPOLÍMEROS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIOS, Mariana Alves et al. TEMPO-oxidized cellulose poly-ionic drawn fiber, a cell support system proof of concept. Journal of Materials Science, v. 56, p. 16661-16670, 2021Tradução . . Disponível em: https://doi.org/10.1007/s10853-021-06373-4. Acesso em: 30 nov. 2025.
APA
Rios, M. A., Barbugli, P. A., Iemma, M. R. C., Grande, R., Carvalho, A. J. F., & Trovatti, E. (2021). TEMPO-oxidized cellulose poly-ionic drawn fiber, a cell support system proof of concept. Journal of Materials Science, 56, 16661-16670. doi:10.1007/s10853-021-06373-4
NLM
Rios MA, Barbugli PA, Iemma MRC, Grande R, Carvalho AJF, Trovatti E. TEMPO-oxidized cellulose poly-ionic drawn fiber, a cell support system proof of concept [Internet]. Journal of Materials Science. 2021 ; 56 16661-16670.[citado 2025 nov. 30 ] Available from: https://doi.org/10.1007/s10853-021-06373-4
Vancouver
Rios MA, Barbugli PA, Iemma MRC, Grande R, Carvalho AJF, Trovatti E. TEMPO-oxidized cellulose poly-ionic drawn fiber, a cell support system proof of concept [Internet]. Journal of Materials Science. 2021 ; 56 16661-16670.[citado 2025 nov. 30 ] Available from: https://doi.org/10.1007/s10853-021-06373-4
Artigo de periodico
Impact of bleaching pine fibre on the fibre/cement interface (2012)
Tonoli, G. H. D.; Belgacem, M. N.; Bras, J.; Silva, Marcelo de Assumpção Pereira da ; Lahr, Francisco Antonio Rocco ; Savastano Júnior, Holmer
Fonte: Journal of Materials Science. Unidades: IFSC, EESC, FZEA
Assuntos: FIBRAS VEGETAIS, CIMENTO (EXPERIMENTAÇÃO), MATERIAIS (DESENVOLVIMENTO)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TONOLI, G. H. D. et al. Impact of bleaching pine fibre on the fibre/cement interface. Journal of Materials Science, v. 47, n. 9, p. 4167-4177, 2012Tradução . . Disponível em: https://doi.org/10.1007/s10853-012-6271-z. Acesso em: 30 nov. 2025.
APA
Tonoli, G. H. D., Belgacem, M. N., Bras, J., Silva, M. de A. P. da, Lahr, F. A. R., & Savastano Júnior, H. (2012). Impact of bleaching pine fibre on the fibre/cement interface. Journal of Materials Science, 47( 9), 4167-4177. doi:10.1007/s10853-012-6271-z
NLM
Tonoli GHD, Belgacem MN, Bras J, Silva M de AP da, Lahr FAR, Savastano Júnior H. Impact of bleaching pine fibre on the fibre/cement interface [Internet]. Journal of Materials Science. 2012 ; 47( 9): 4167-4177.[citado 2025 nov. 30 ] Available from: https://doi.org/10.1007/s10853-012-6271-z
Vancouver
Tonoli GHD, Belgacem MN, Bras J, Silva M de AP da, Lahr FAR, Savastano Júnior H. Impact of bleaching pine fibre on the fibre/cement interface [Internet]. Journal of Materials Science. 2012 ; 47( 9): 4167-4177.[citado 2025 nov. 30 ] Available from: https://doi.org/10.1007/s10853-012-6271-z
Artigo de periodico
Oxidation and abrasive wear of 'FE'-'SI' and 'FE'-'AL' intermetallic alloys (2010)
Malafaia, Artur Mariano de Sousa; Milan, Marcelo Tadeu; Maluf, Omar; Muñoz Riofano, Rosamel Melita; Oliveira, Marcelo Falcão de
Fonte: Journal of Materials Science. Unidade: EESC
Assuntos: DESGASTE ABRASIVO, AÇO INOXIDÁVEL AUSTENÍTICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MALAFAIA, Artur Mariano de Sousa et al. Oxidation and abrasive wear of 'FE'-'SI' and 'FE'-'AL' intermetallic alloys. Journal of Materials Science, v. 45, n. 19, p. 5393-5397, 2010Tradução . . Disponível em: https://doi.org/10.1007/s10853-010-4591-4. Acesso em: 30 nov. 2025.
APA
Malafaia, A. M. de S., Milan, M. T., Maluf, O., Muñoz Riofano, R. M., & Oliveira, M. F. de. (2010). Oxidation and abrasive wear of 'FE'-'SI' and 'FE'-'AL' intermetallic alloys. Journal of Materials Science, 45( 19), 5393-5397. doi:10.1007/s10853-010-4591-4
NLM
Malafaia AM de S, Milan MT, Maluf O, Muñoz Riofano RM, Oliveira MF de. Oxidation and abrasive wear of 'FE'-'SI' and 'FE'-'AL' intermetallic alloys [Internet]. Journal of Materials Science. 2010 ; 45( 19): 5393-5397.[citado 2025 nov. 30 ] Available from: https://doi.org/10.1007/s10853-010-4591-4
Vancouver
Malafaia AM de S, Milan MT, Maluf O, Muñoz Riofano RM, Oliveira MF de. Oxidation and abrasive wear of 'FE'-'SI' and 'FE'-'AL' intermetallic alloys [Internet]. Journal of Materials Science. 2010 ; 45( 19): 5393-5397.[citado 2025 nov. 30 ] Available from: https://doi.org/10.1007/s10853-010-4591-4
Artigo de periodico
Grain size effects in the charpy impact energy of a thermally embrittled RPV steel (2003)
Tarpani, José Ricardo ; Spinelli, Dirceu
Fonte: Journal of Materials Science. Unidade: EESC
Assunto: MECÂNICA DA FRATURA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TARPANI, José Ricardo e SPINELLI, Dirceu. Grain size effects in the charpy impact energy of a thermally embrittled RPV steel. Journal of Materials Science, v. 38, p. 1493-1498, 2003Tradução . . Disponível em: http://ipsapp009.kluweronline.com/content/search/4861/151/17/fulltext.pdf. Acesso em: 30 nov. 2025.
APA
Tarpani, J. R., & Spinelli, D. (2003). Grain size effects in the charpy impact energy of a thermally embrittled RPV steel. Journal of Materials Science, 38, 1493-1498. Recuperado de http://ipsapp009.kluweronline.com/content/search/4861/151/17/fulltext.pdf
NLM
Tarpani JR, Spinelli D. Grain size effects in the charpy impact energy of a thermally embrittled RPV steel [Internet]. Journal of Materials Science. 2003 ; 38 1493-1498.[citado 2025 nov. 30 ] Available from: http://ipsapp009.kluweronline.com/content/search/4861/151/17/fulltext.pdf
Vancouver
Tarpani JR, Spinelli D. Grain size effects in the charpy impact energy of a thermally embrittled RPV steel [Internet]. Journal of Materials Science. 2003 ; 38 1493-1498.[citado 2025 nov. 30 ] Available from: http://ipsapp009.kluweronline.com/content/search/4861/151/17/fulltext.pdf

Unidades USP

ReP

Filtros

Autores

Autores USP

Ano de publicação

Assuntos

Grupo de pesquisa

Agência de fomento

Indexado em

Afiliação dos autores externos não normalizada

País das instituições de afiliação dos autores externos