ReP USP - Resultado da busca

Artigo de periodico
Hybrid bisphenol A non-isocyanate polyurethane composite with mica powder: a new insulating material (2023)
Santos, Juliana Jarussi dos ; Lopes, José Humberto; Aguiar, Kelen Menezes Flores Rossi de ; Simões, Mateus Batista ; M'Peko, Jean Claude ; Jasinevicius, Renato Goulart ; Cavalheiro, Eder Tadeu Gomes ; Imasato, Hidetake ; Rodrigues Filho, Ubirajara Pereira
Source: Journal of CO2 Utilization. Unidades: IFSC, EESC, IQSC
Subjects: DIÓXIDO DE CARBONO, POLÍMEROS (QUÍMICA ORGÂNICA)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Juliana Jarussi dos et al. Hybrid bisphenol A non-isocyanate polyurethane composite with mica powder: a new insulating material. Journal of CO2 Utilization, v. 67, n. Ja 2023, p. 102303-1-102303-12 + supplementary material, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.jcou.2022.102303. Acesso em: 02 out. 2024.
APA
Santos, J. J. dos, Lopes, J. H., Aguiar, K. M. F. R. de, Simões, M. B., M'Peko, J. C., Jasinevicius, R. G., et al. (2023). Hybrid bisphenol A non-isocyanate polyurethane composite with mica powder: a new insulating material. Journal of CO2 Utilization, 67( Ja 2023), 102303-1-102303-12 + supplementary material. doi:10.1016/j.jcou.2022.102303
NLM
Santos JJ dos, Lopes JH, Aguiar KMFR de, Simões MB, M'Peko JC, Jasinevicius RG, Cavalheiro ETG, Imasato H, Rodrigues Filho UP. Hybrid bisphenol A non-isocyanate polyurethane composite with mica powder: a new insulating material [Internet]. Journal of CO2 Utilization. 2023 ; 67( Ja 2023): 102303-1-102303-12 + supplementary material.[citado 2024 out. 02 ] Available from: https://doi.org/10.1016/j.jcou.2022.102303
Vancouver
Santos JJ dos, Lopes JH, Aguiar KMFR de, Simões MB, M'Peko JC, Jasinevicius RG, Cavalheiro ETG, Imasato H, Rodrigues Filho UP. Hybrid bisphenol A non-isocyanate polyurethane composite with mica powder: a new insulating material [Internet]. Journal of CO2 Utilization. 2023 ; 67( Ja 2023): 102303-1-102303-12 + supplementary material.[citado 2024 out. 02 ] Available from: https://doi.org/10.1016/j.jcou.2022.102303
Trabalho de evento
A method for deposition rate estimation on a low-cost home-built DC sputter system (2022)
Pinto, H. M.; Jasinevicius, Renato Goulart; Cirino, G. A.
Conference titles: Symposium on Microelectronics Technology and Devices - SBMicro. Unidade: EESC
Subjects: FILMES FINOS, SEMICONDUTORES, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PINTO, H. M. e JASINEVICIUS, Renato Goulart e CIRINO, G. A. A method for deposition rate estimation on a low-cost home-built DC sputter system. 2022, Anais.. Piscataway, NJ, USA: IEEE, 2022. Disponível em: https://doi.org/10.1109/SBMICRO55822.2022.9881038. Acesso em: 02 out. 2024.
APA
Pinto, H. M., Jasinevicius, R. G., & Cirino, G. A. (2022). A method for deposition rate estimation on a low-cost home-built DC sputter system. In . Piscataway, NJ, USA: IEEE. doi:10.1109/SBMICRO55822.2022.9881038
NLM
Pinto HM, Jasinevicius RG, Cirino GA. A method for deposition rate estimation on a low-cost home-built DC sputter system [Internet]. 2022 ;[citado 2024 out. 02 ] Available from: https://doi.org/10.1109/SBMICRO55822.2022.9881038
Vancouver
Pinto HM, Jasinevicius RG, Cirino GA. A method for deposition rate estimation on a low-cost home-built DC sputter system [Internet]. 2022 ;[citado 2024 out. 02 ] Available from: https://doi.org/10.1109/SBMICRO55822.2022.9881038
Artigo de periodico
Influence of different glaze firing protocols on the mechanical properties of CAD-CAM ceramic materials (2022)
Zanoboni, Joissi Ferrari; Silva, Aryvelto Miranda; Alencar, Cristiane de Melo; Porto, Thiago Soares; Jasinevicius, Renato Goulart; Fortulan, Carlos Alberto ; Campos, Edson Alves de
Source: The Journal of Prosthetic Dentistry. Unidade: EESC
Subjects: MATERIAIS CERÂMICOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ZANOBONI, Joissi Ferrari et al. Influence of different glaze firing protocols on the mechanical properties of CAD-CAM ceramic materials. The Journal of Prosthetic Dentistry, v. 127, n. 6, p. 1-8, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.prosdent.2022.03.009. Acesso em: 02 out. 2024.
APA
Zanoboni, J. F., Silva, A. M., Alencar, C. de M., Porto, T. S., Jasinevicius, R. G., Fortulan, C. A., & Campos, E. A. de. (2022). Influence of different glaze firing protocols on the mechanical properties of CAD-CAM ceramic materials. The Journal of Prosthetic Dentistry, 127( 6), 1-8. doi:10.1016/j.prosdent.2022.03.009
NLM
Zanoboni JF, Silva AM, Alencar C de M, Porto TS, Jasinevicius RG, Fortulan CA, Campos EA de. Influence of different glaze firing protocols on the mechanical properties of CAD-CAM ceramic materials [Internet]. The Journal of Prosthetic Dentistry. 2022 ; 127( 6): 1-8.[citado 2024 out. 02 ] Available from: https://doi.org/10.1016/j.prosdent.2022.03.009
Vancouver
Zanoboni JF, Silva AM, Alencar C de M, Porto TS, Jasinevicius RG, Fortulan CA, Campos EA de. Influence of different glaze firing protocols on the mechanical properties of CAD-CAM ceramic materials [Internet]. The Journal of Prosthetic Dentistry. 2022 ; 127( 6): 1-8.[citado 2024 out. 02 ] Available from: https://doi.org/10.1016/j.prosdent.2022.03.009
Artigo de periodico
Tuning the photoconductivity of Co3O4 thin films by defect engineering (2022)
Silva, Ana Luiza Costa; Rodrigues, Ariano de Giovanni; Jasinevicius, Renato Goulart; Godoy, Marcio Peron Franco de
Source: Applied Surface Science. Unidade: EESC
Subjects: FOTOCONDUTIVIDADE, FILMES FINOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Ana Luiza Costa et al. Tuning the photoconductivity of Co3O4 thin films by defect engineering. Applied Surface Science, v. 606, p. 1-9, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.apsusc.2022.154943. Acesso em: 02 out. 2024.
APA
Silva, A. L. C., Rodrigues, A. de G., Jasinevicius, R. G., & Godoy, M. P. F. de. (2022). Tuning the photoconductivity of Co3O4 thin films by defect engineering. Applied Surface Science, 606, 1-9. doi:10.1016/j.apsusc.2022.154943
NLM
Silva ALC, Rodrigues A de G, Jasinevicius RG, Godoy MPF de. Tuning the photoconductivity of Co3O4 thin films by defect engineering [Internet]. Applied Surface Science. 2022 ; 606 1-9.[citado 2024 out. 02 ] Available from: https://doi.org/10.1016/j.apsusc.2022.154943
Vancouver
Silva ALC, Rodrigues A de G, Jasinevicius RG, Godoy MPF de. Tuning the photoconductivity of Co3O4 thin films by defect engineering [Internet]. Applied Surface Science. 2022 ; 606 1-9.[citado 2024 out. 02 ] Available from: https://doi.org/10.1016/j.apsusc.2022.154943
Artigo de periodico
Hot embossing of aspherical Fresnel microlenses: design, process, and characterization (2021)
Colafemina, João Paulo; Dib, Marcel Henrique Militão; Jasinevicius, Renato Goulart
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: ENGENHARIA MECÂNICA, TORNEAMENTO, POLÍMEROS (MATERIAIS)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COLAFEMINA, João Paulo e DIB, Marcel Henrique Militão e JASINEVICIUS, Renato Goulart. Hot embossing of aspherical Fresnel microlenses: design, process, and characterization. International Journal of Advanced Manufacturing Technology, p. 1-19, 2021Tradução . . Disponível em: https://doi.org/10.1007/s00170-021-06637-y. Acesso em: 02 out. 2024.
APA
Colafemina, J. P., Dib, M. H. M., & Jasinevicius, R. G. (2021). Hot embossing of aspherical Fresnel microlenses: design, process, and characterization. International Journal of Advanced Manufacturing Technology, 1-19. doi:10.1007/s00170-021-06637-y
NLM
Colafemina JP, Dib MHM, Jasinevicius RG. Hot embossing of aspherical Fresnel microlenses: design, process, and characterization [Internet]. International Journal of Advanced Manufacturing Technology. 2021 ; 1-19.[citado 2024 out. 02 ] Available from: https://doi.org/10.1007/s00170-021-06637-y
Vancouver
Colafemina JP, Dib MHM, Jasinevicius RG. Hot embossing of aspherical Fresnel microlenses: design, process, and characterization [Internet]. International Journal of Advanced Manufacturing Technology. 2021 ; 1-19.[citado 2024 out. 02 ] Available from: https://doi.org/10.1007/s00170-021-06637-y
Artigo de periodico
Size effects in ultraprecision machining of aluminum alloys: conventional AA6061-T6 and RSA 6061-T6 (2021)
Jasinevicius, Renato Goulart ; Otoboni, José Antônio; Basso, Igor Fernando; Dib, Marcel Henrique Militão
Source: Journal of Manufacturing Processes. Unidade: EESC
Assunto: ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart et al. Size effects in ultraprecision machining of aluminum alloys: conventional AA6061-T6 and RSA 6061-T6. Journal of Manufacturing Processes, v. 68, p. 136-157, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.jmapro.2021.07.027. Acesso em: 02 out. 2024.
APA
Jasinevicius, R. G., Otoboni, J. A., Basso, I. F., & Dib, M. H. M. (2021). Size effects in ultraprecision machining of aluminum alloys: conventional AA6061-T6 and RSA 6061-T6. Journal of Manufacturing Processes, 68, 136-157. doi:10.1016/j.jmapro.2021.07.027
NLM
Jasinevicius RG, Otoboni JA, Basso IF, Dib MHM. Size effects in ultraprecision machining of aluminum alloys: conventional AA6061-T6 and RSA 6061-T6 [Internet]. Journal of Manufacturing Processes. 2021 ; 68 136-157.[citado 2024 out. 02 ] Available from: https://doi.org/10.1016/j.jmapro.2021.07.027
Vancouver
Jasinevicius RG, Otoboni JA, Basso IF, Dib MHM. Size effects in ultraprecision machining of aluminum alloys: conventional AA6061-T6 and RSA 6061-T6 [Internet]. Journal of Manufacturing Processes. 2021 ; 68 136-157.[citado 2024 out. 02 ] Available from: https://doi.org/10.1016/j.jmapro.2021.07.027
Artigo de periodico
On the photoconductivity behavior of emeraldine-salt polyaniline films (2021)
Paiva, A. B. de; Correr, G. I.; Ugucioni, Julio César; Carvalho, G. R.; Jasinevicius, Renato Goulart; Godoy, M. P. F. de
Source: Synthetic Metals. Unidade: EESC
Subjects: FOTOCONDUTIVIDADE, FOTOLUMINESCÊNCIA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PAIVA, A. B. de et al. On the photoconductivity behavior of emeraldine-salt polyaniline films. Synthetic Metals, v. 281, p. 1-10, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.synthmet.2021.116915. Acesso em: 02 out. 2024.
APA
Paiva, A. B. de, Correr, G. I., Ugucioni, J. C., Carvalho, G. R., Jasinevicius, R. G., & Godoy, M. P. F. de. (2021). On the photoconductivity behavior of emeraldine-salt polyaniline films. Synthetic Metals, 281, 1-10. doi:10.1016/j.synthmet.2021.116915
NLM
Paiva AB de, Correr GI, Ugucioni JC, Carvalho GR, Jasinevicius RG, Godoy MPF de. On the photoconductivity behavior of emeraldine-salt polyaniline films [Internet]. Synthetic Metals. 2021 ; 281 1-10.[citado 2024 out. 02 ] Available from: https://doi.org/10.1016/j.synthmet.2021.116915
Vancouver
Paiva AB de, Correr GI, Ugucioni JC, Carvalho GR, Jasinevicius RG, Godoy MPF de. On the photoconductivity behavior of emeraldine-salt polyaniline films [Internet]. Synthetic Metals. 2021 ; 281 1-10.[citado 2024 out. 02 ] Available from: https://doi.org/10.1016/j.synthmet.2021.116915
Artigo de periodico
Micro drilling of carbon fiber reinforced polymer (2019)
Basso, Igor; Batista, Marcelo Ferreira; Jasinevicius, Renato Goulart; Rodrigues, Alessandro Roger ; Rubio, Juan Carlos Campos
Source: Composite Structures. Unidade: EESC
Subjects: PERFURAÇÃO, POLÍMEROS (MATERIAIS), DANO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BASSO, Igor et al. Micro drilling of carbon fiber reinforced polymer. Composite Structures, v. No 2019, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.compstruct.2019.111312. Acesso em: 02 out. 2024.
APA
Basso, I., Batista, M. F., Jasinevicius, R. G., Rodrigues, A. R., & Rubio, J. C. C. (2019). Micro drilling of carbon fiber reinforced polymer. Composite Structures, No 2019. doi:10.1016/j.compstruct.2019.111312
NLM
Basso I, Batista MF, Jasinevicius RG, Rodrigues AR, Rubio JCC. Micro drilling of carbon fiber reinforced polymer [Internet]. Composite Structures. 2019 ; No 2019[citado 2024 out. 02 ] Available from: https://doi.org/10.1016/j.compstruct.2019.111312
Vancouver
Basso I, Batista MF, Jasinevicius RG, Rodrigues AR, Rubio JCC. Micro drilling of carbon fiber reinforced polymer [Internet]. Composite Structures. 2019 ; No 2019[citado 2024 out. 02 ] Available from: https://doi.org/10.1016/j.compstruct.2019.111312
Artigo de periodico
Assessment of replication fidelity of optical microstructures by hot embossing (2017)
Cirino, Giuseppe Antonio; Granado, Renê Mendes; Mohammed-Brahim, Tayeb; Jasinevicius, Renato Goulart
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Assunto: DIAMANTE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CIRINO, Giuseppe Antonio et al. Assessment of replication fidelity of optical microstructures by hot embossing. International Journal of Advanced Manufacturing Technology, v. 88, n. Ja 2017, p. 303-316, 2017Tradução . . Disponível em: https://doi.org/10.1007/s00170-016-8757-3. Acesso em: 02 out. 2024.
APA
Cirino, G. A., Granado, R. M., Mohammed-Brahim, T., & Jasinevicius, R. G. (2017). Assessment of replication fidelity of optical microstructures by hot embossing. International Journal of Advanced Manufacturing Technology, 88( Ja 2017), 303-316. doi:10.1007/s00170-016-8757-3
NLM
Cirino GA, Granado RM, Mohammed-Brahim T, Jasinevicius RG. Assessment of replication fidelity of optical microstructures by hot embossing [Internet]. International Journal of Advanced Manufacturing Technology. 2017 ; 88( Ja 2017): 303-316.[citado 2024 out. 02 ] Available from: https://doi.org/10.1007/s00170-016-8757-3
Vancouver
Cirino GA, Granado RM, Mohammed-Brahim T, Jasinevicius RG. Assessment of replication fidelity of optical microstructures by hot embossing [Internet]. International Journal of Advanced Manufacturing Technology. 2017 ; 88( Ja 2017): 303-316.[citado 2024 out. 02 ] Available from: https://doi.org/10.1007/s00170-016-8757-3
Artigo de periodico
Effect of a bioactive glass ceramic on the control of enamel and dentin erosion lesions (2017)
Chinelatti, Michelle Alexandra; Tirapelli, Camila; Corona, Silmara Aparecida Milori; Jasinevicius, Renato Goulart; Peitl, Oscar; Zanotto, Edgar Dutra; Pires-de-Souza, Fernanda de Carvalho Panzeri
Source: Brazilian Dental Journal. Unidades: FORP, EESC
Subjects: CERÂMICA, EROSÃO DE DENTE, CÁRIE DENTÁRIA, ESMALTE DENTÁRIO, DENTINA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CHINELATTI, Michelle Alexandra et al. Effect of a bioactive glass ceramic on the control of enamel and dentin erosion lesions. Brazilian Dental Journal, v. 28, n. 4, p. 489-497, 2017Tradução . . Disponível em: https://doi.org/10.1590/0103-6440201601524. Acesso em: 02 out. 2024.
APA
Chinelatti, M. A., Tirapelli, C., Corona, S. A. M., Jasinevicius, R. G., Peitl, O., Zanotto, E. D., & Pires-de-Souza, F. de C. P. (2017). Effect of a bioactive glass ceramic on the control of enamel and dentin erosion lesions. Brazilian Dental Journal, 28( 4), 489-497. doi:10.1590/0103-6440201601524
NLM
Chinelatti MA, Tirapelli C, Corona SAM, Jasinevicius RG, Peitl O, Zanotto ED, Pires-de-Souza F de CP. Effect of a bioactive glass ceramic on the control of enamel and dentin erosion lesions [Internet]. Brazilian Dental Journal. 2017 ; 28( 4): 489-497.[citado 2024 out. 02 ] Available from: https://doi.org/10.1590/0103-6440201601524
Vancouver
Chinelatti MA, Tirapelli C, Corona SAM, Jasinevicius RG, Peitl O, Zanotto ED, Pires-de-Souza F de CP. Effect of a bioactive glass ceramic on the control of enamel and dentin erosion lesions [Internet]. Brazilian Dental Journal. 2017 ; 28( 4): 489-497.[citado 2024 out. 02 ] Available from: https://doi.org/10.1590/0103-6440201601524
Parte de monografia/livro
Machining scale: workpiece grain size and surface integrity in micro end milling (2017)
Rodrigues, Alessandro Roger ; Jasinevicius, Renato Goulart
Source: Microfabrication and precision engineering : research and development. Unidade: EESC
Assunto: USINAGEM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RODRIGUES, Alessandro Roger e JASINEVICIUS, Renato Goulart. Machining scale: workpiece grain size and surface integrity in micro end milling. Microfabrication and precision engineering : research and development. Tradução . Duxford: Elsevier Ltd, 2017. p. 27-68. Disponível em: https://doi.org/10.1016/B978-0-85709-485-8.00002-4. Acesso em: 02 out. 2024.
APA
Rodrigues, A. R., & Jasinevicius, R. G. (2017). Machining scale: workpiece grain size and surface integrity in micro end milling. In Microfabrication and precision engineering : research and development (p. 27-68). Duxford: Elsevier Ltd. doi:10.1016/B978-0-85709-485-8.00002-4
NLM
Rodrigues AR, Jasinevicius RG. Machining scale: workpiece grain size and surface integrity in micro end milling [Internet]. In: Microfabrication and precision engineering : research and development. Duxford: Elsevier Ltd; 2017. p. 27-68.[citado 2024 out. 02 ] Available from: https://doi.org/10.1016/B978-0-85709-485-8.00002-4
Vancouver
Rodrigues AR, Jasinevicius RG. Machining scale: workpiece grain size and surface integrity in micro end milling [Internet]. In: Microfabrication and precision engineering : research and development. Duxford: Elsevier Ltd; 2017. p. 27-68.[citado 2024 out. 02 ] Available from: https://doi.org/10.1016/B978-0-85709-485-8.00002-4
Artigo de periodico
Precision dicing of hard materials with abrasive blade (2016)
Araújo, L. A. O.; Foschini, C. R.; Jasinevicius, Renato Goulart; Fortulan, Carlos Alberto
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: CORTE, FERRAMENTAS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ARAÚJO, L. A. O. et al. Precision dicing of hard materials with abrasive blade. International Journal of Advanced Manufacturing Technology, v. 86, n. 9-12, p. 2885-2894, 2016Tradução . . Disponível em: https://doi.org/10.1007/s00170-016-8394-x. Acesso em: 02 out. 2024.
APA
Araújo, L. A. O., Foschini, C. R., Jasinevicius, R. G., & Fortulan, C. A. (2016). Precision dicing of hard materials with abrasive blade. International Journal of Advanced Manufacturing Technology, 86( 9-12), 2885-2894. doi:10.1007/s00170-016-8394-x
NLM
Araújo LAO, Foschini CR, Jasinevicius RG, Fortulan CA. Precision dicing of hard materials with abrasive blade [Internet]. International Journal of Advanced Manufacturing Technology. 2016 ; 86( 9-12): 2885-2894.[citado 2024 out. 02 ] Available from: https://doi.org/10.1007/s00170-016-8394-x
Vancouver
Araújo LAO, Foschini CR, Jasinevicius RG, Fortulan CA. Precision dicing of hard materials with abrasive blade [Internet]. International Journal of Advanced Manufacturing Technology. 2016 ; 86( 9-12): 2885-2894.[citado 2024 out. 02 ] Available from: https://doi.org/10.1007/s00170-016-8394-x
Artigo de periodico
Ultraprecision machining of diffraction optical elements on soft semiconductor crystal (2015)
Jasinevicius, Renato Goulart; Pizani, Paulo Sérgio; Cirino, Giuseppe Antonio
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: USINAGEM, MUDANÇA DE FASE, DIAMANTE (FERRAMENTAS)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart e PIZANI, Paulo Sérgio e CIRINO, Giuseppe Antonio. Ultraprecision machining of diffraction optical elements on soft semiconductor crystal. International Journal of Advanced Manufacturing Technology, v. 77, n. 5, p. 1145-1154, 2015Tradução . . Disponível em: https://doi.org/10.1007/s00170-014-6449-4. Acesso em: 02 out. 2024.
APA
Jasinevicius, R. G., Pizani, P. S., & Cirino, G. A. (2015). Ultraprecision machining of diffraction optical elements on soft semiconductor crystal. International Journal of Advanced Manufacturing Technology, 77( 5), 1145-1154. doi:10.1007/s00170-014-6449-4
NLM
Jasinevicius RG, Pizani PS, Cirino GA. Ultraprecision machining of diffraction optical elements on soft semiconductor crystal [Internet]. International Journal of Advanced Manufacturing Technology. 2015 ; 77( 5): 1145-1154.[citado 2024 out. 02 ] Available from: https://doi.org/10.1007/s00170-014-6449-4
Vancouver
Jasinevicius RG, Pizani PS, Cirino GA. Ultraprecision machining of diffraction optical elements on soft semiconductor crystal [Internet]. International Journal of Advanced Manufacturing Technology. 2015 ; 77( 5): 1145-1154.[citado 2024 out. 02 ] Available from: https://doi.org/10.1007/s00170-014-6449-4
Artigo de periodico
Micro end-milling of channels using ultrafine-grained low-carbon steel (2015)
Assis, Cleiton Lazaro Fazolo de; Jasinevicius, Renato Goulart; Rodrigues, Alessandro Roger
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: USINAGEM, AÇO BAIXO CARBONO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ASSIS, Cleiton Lazaro Fazolo de e JASINEVICIUS, Renato Goulart e RODRIGUES, Alessandro Roger. Micro end-milling of channels using ultrafine-grained low-carbon steel. International Journal of Advanced Manufacturing Technology, v. 77, n. 5, p. 1155-1165, 2015Tradução . . Disponível em: https://doi.org/10.1007/s00170-014-6503-2. Acesso em: 02 out. 2024.
APA
Assis, C. L. F. de, Jasinevicius, R. G., & Rodrigues, A. R. (2015). Micro end-milling of channels using ultrafine-grained low-carbon steel. International Journal of Advanced Manufacturing Technology, 77( 5), 1155-1165. doi:10.1007/s00170-014-6503-2
NLM
Assis CLF de, Jasinevicius RG, Rodrigues AR. Micro end-milling of channels using ultrafine-grained low-carbon steel [Internet]. International Journal of Advanced Manufacturing Technology. 2015 ; 77( 5): 1155-1165.[citado 2024 out. 02 ] Available from: https://doi.org/10.1007/s00170-014-6503-2
Vancouver
Assis CLF de, Jasinevicius RG, Rodrigues AR. Micro end-milling of channels using ultrafine-grained low-carbon steel [Internet]. International Journal of Advanced Manufacturing Technology. 2015 ; 77( 5): 1155-1165.[citado 2024 out. 02 ] Available from: https://doi.org/10.1007/s00170-014-6503-2
Trabalho de evento
The influence of different tungsten carbides (grain size and cobalt percentage) upon material removal mechanism in ultraprecision grinding (2015)
Gonçalves, André M.; Duduch, Jaime Gilberto; Jasinevicius, Renato Goulart; Gonçalves, Daniel M.; Dib, Marcel Henrique Militão
Source: Proceedings. Conference titles: Euspen International Conference & Exibition. Unidade: EESC
Subjects: MOAGEM, TUNGSTÊNIO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GONÇALVES, André M. et al. The influence of different tungsten carbides (grain size and cobalt percentage) upon material removal mechanism in ultraprecision grinding. 2015, Anais.. Leuven, Belgium: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2015. Disponível em: https://www.euspen.eu/knowledge-base/ICE15-P2.10.pdf. Acesso em: 02 out. 2024.
APA
Gonçalves, A. M., Duduch, J. G., Jasinevicius, R. G., Gonçalves, D. M., & Dib, M. H. M. (2015). The influence of different tungsten carbides (grain size and cobalt percentage) upon material removal mechanism in ultraprecision grinding. In Proceedings. Leuven, Belgium: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://www.euspen.eu/knowledge-base/ICE15-P2.10.pdf
NLM
Gonçalves AM, Duduch JG, Jasinevicius RG, Gonçalves DM, Dib MHM. The influence of different tungsten carbides (grain size and cobalt percentage) upon material removal mechanism in ultraprecision grinding [Internet]. Proceedings. 2015 ;[citado 2024 out. 02 ] Available from: https://www.euspen.eu/knowledge-base/ICE15-P2.10.pdf
Vancouver
Gonçalves AM, Duduch JG, Jasinevicius RG, Gonçalves DM, Dib MHM. The influence of different tungsten carbides (grain size and cobalt percentage) upon material removal mechanism in ultraprecision grinding [Internet]. Proceedings. 2015 ;[citado 2024 out. 02 ] Available from: https://www.euspen.eu/knowledge-base/ICE15-P2.10.pdf
Trabalho de evento
Diamond wheel grinding performance evaluation of yttria stabilized zirconia-cubic and tetragonal phases (2015)
Dib, Marcel Henrique Militão; Gonçalves, André M.; Jasinevicius, Renato Goulart; Duduch, Jaime Gilberto
Source: Proceedings. Conference titles: Euspen International Conference & Exibition. Unidade: EESC
Subjects: MOAGEM, USINAGEM, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DIB, Marcel Henrique Militão et al. Diamond wheel grinding performance evaluation of yttria stabilized zirconia-cubic and tetragonal phases. 2015, Anais.. Leuven, Belgium: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2015. Disponível em: https://www.euspen.eu/knowledge-base/ICE15-P2.11.pdf. Acesso em: 02 out. 2024.
APA
Dib, M. H. M., Gonçalves, A. M., Jasinevicius, R. G., & Duduch, J. G. (2015). Diamond wheel grinding performance evaluation of yttria stabilized zirconia-cubic and tetragonal phases. In Proceedings. Leuven, Belgium: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://www.euspen.eu/knowledge-base/ICE15-P2.11.pdf
NLM
Dib MHM, Gonçalves AM, Jasinevicius RG, Duduch JG. Diamond wheel grinding performance evaluation of yttria stabilized zirconia-cubic and tetragonal phases [Internet]. Proceedings. 2015 ;[citado 2024 out. 02 ] Available from: https://www.euspen.eu/knowledge-base/ICE15-P2.11.pdf
Vancouver
Dib MHM, Gonçalves AM, Jasinevicius RG, Duduch JG. Diamond wheel grinding performance evaluation of yttria stabilized zirconia-cubic and tetragonal phases [Internet]. Proceedings. 2015 ;[citado 2024 out. 02 ] Available from: https://www.euspen.eu/knowledge-base/ICE15-P2.11.pdf
Trabalho de evento-anais periodico
The effect of high non-hydrostatic pressure on III-V semiconductors: zinc blende to wurtzite structural phase transition and multiphase generation (2014)
Pizani, Paulo Sérgio; Jasinevicius, Renato Goulart
Source: Journal of Physics: Conference Series. Conference titles: Biennial International Conference of the APS Topical Group on Shock Compression of Condensed Matter - APS-SCCM. Unidade: EESC
Subjects: ESPECTROSCOPIA RAMAN, SEMICONDUTORES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PIZANI, Paulo Sérgio e JASINEVICIUS, Renato Goulart. The effect of high non-hydrostatic pressure on III-V semiconductors: zinc blende to wurtzite structural phase transition and multiphase generation. Journal of Physics: Conference Series. Bristol: Escola de Engenharia de São Carlos, Universidade de São Paulo. Disponível em: https://doi.org/10.1088/1742-6596/500/18/182032. Acesso em: 02 out. 2024. , 2014
APA
Pizani, P. S., & Jasinevicius, R. G. (2014). The effect of high non-hydrostatic pressure on III-V semiconductors: zinc blende to wurtzite structural phase transition and multiphase generation. Journal of Physics: Conference Series. Bristol: Escola de Engenharia de São Carlos, Universidade de São Paulo. doi:10.1088/1742-6596/500/18/182032
NLM
Pizani PS, Jasinevicius RG. The effect of high non-hydrostatic pressure on III-V semiconductors: zinc blende to wurtzite structural phase transition and multiphase generation [Internet]. Journal of Physics: Conference Series. 2014 ; 500 1-5.[citado 2024 out. 02 ] Available from: https://doi.org/10.1088/1742-6596/500/18/182032
Vancouver
Pizani PS, Jasinevicius RG. The effect of high non-hydrostatic pressure on III-V semiconductors: zinc blende to wurtzite structural phase transition and multiphase generation [Internet]. Journal of Physics: Conference Series. 2014 ; 500 1-5.[citado 2024 out. 02 ] Available from: https://doi.org/10.1088/1742-6596/500/18/182032
Trabalho de evento
Diamond turning of metallurgical and mechanically modified Al-Mg Alloy (2014)
Jasinevicius, Renato Goulart ; Duduch, Jaime Gilberto
Source: Proceedings. Conference titles: Euspen International Conference & Exibition. Unidade: EESC
Subjects: TORNEAMENTO, INTEGRIDADE ESTRUTURAL, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart e DUDUCH, Jaime Gilberto. Diamond turning of metallurgical and mechanically modified Al-Mg Alloy. 2014, Anais.. Dubrovnik, Croatia: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2014. Disponível em: https://repositorio.usp.br/directbitstream/a0e76e43-ffe4-4a88-8790-5137aa9c85f7/trabalho%2017%20-%20Diamond%20turning%20of%20metallurgical%20and%20mechanically%20modified%20Al-Mg%20Alloy%20%28euspen%202014%29%20%281%29.pdf. Acesso em: 02 out. 2024.
APA
Jasinevicius, R. G., & Duduch, J. G. (2014). Diamond turning of metallurgical and mechanically modified Al-Mg Alloy. In Proceedings. Dubrovnik, Croatia: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/a0e76e43-ffe4-4a88-8790-5137aa9c85f7/trabalho%2017%20-%20Diamond%20turning%20of%20metallurgical%20and%20mechanically%20modified%20Al-Mg%20Alloy%20%28euspen%202014%29%20%281%29.pdf
NLM
Jasinevicius RG, Duduch JG. Diamond turning of metallurgical and mechanically modified Al-Mg Alloy [Internet]. Proceedings. 2014 ;[citado 2024 out. 02 ] Available from: https://repositorio.usp.br/directbitstream/a0e76e43-ffe4-4a88-8790-5137aa9c85f7/trabalho%2017%20-%20Diamond%20turning%20of%20metallurgical%20and%20mechanically%20modified%20Al-Mg%20Alloy%20%28euspen%202014%29%20%281%29.pdf
Vancouver
Jasinevicius RG, Duduch JG. Diamond turning of metallurgical and mechanically modified Al-Mg Alloy [Internet]. Proceedings. 2014 ;[citado 2024 out. 02 ] Available from: https://repositorio.usp.br/directbitstream/a0e76e43-ffe4-4a88-8790-5137aa9c85f7/trabalho%2017%20-%20Diamond%20turning%20of%20metallurgical%20and%20mechanically%20modified%20Al-Mg%20Alloy%20%28euspen%202014%29%20%281%29.pdf
Trabalho de evento
Surface formation during micromilling of ultrafine grained low carbon steel (2014)
Assis, C. L. F.; Jasinevicius, Renato Goulart ; Coelho, Reginaldo Teixeira
Source: Proceedings. Conference titles: Euspen International Conference & Exibition. Unidade: EESC
Subjects: USINAGEM, AÇO BAIXO CARBONO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ASSIS, C. L. F. e JASINEVICIUS, Renato Goulart e COELHO, Reginaldo Teixeira. Surface formation during micromilling of ultrafine grained low carbon steel. 2014, Anais.. Dubrovnik, Croatia: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2014. Disponível em: https://repositorio.usp.br/directbitstream/3bd56726-96a8-4c54-8d55-27e398bf2233/OK___trabalho%2018%20-%20Surface%20Formation%20during%20micromilling%20of%20ultrafine%20grained%20low%20carbon%20steel%20%28euspen%202014%29%20%281%29.pdf. Acesso em: 02 out. 2024.
APA
Assis, C. L. F., Jasinevicius, R. G., & Coelho, R. T. (2014). Surface formation during micromilling of ultrafine grained low carbon steel. In Proceedings. Dubrovnik, Croatia: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/3bd56726-96a8-4c54-8d55-27e398bf2233/OK___trabalho%2018%20-%20Surface%20Formation%20during%20micromilling%20of%20ultrafine%20grained%20low%20carbon%20steel%20%28euspen%202014%29%20%281%29.pdf
NLM
Assis CLF, Jasinevicius RG, Coelho RT. Surface formation during micromilling of ultrafine grained low carbon steel [Internet]. Proceedings. 2014 ;[citado 2024 out. 02 ] Available from: https://repositorio.usp.br/directbitstream/3bd56726-96a8-4c54-8d55-27e398bf2233/OK___trabalho%2018%20-%20Surface%20Formation%20during%20micromilling%20of%20ultrafine%20grained%20low%20carbon%20steel%20%28euspen%202014%29%20%281%29.pdf
Vancouver
Assis CLF, Jasinevicius RG, Coelho RT. Surface formation during micromilling of ultrafine grained low carbon steel [Internet]. Proceedings. 2014 ;[citado 2024 out. 02 ] Available from: https://repositorio.usp.br/directbitstream/3bd56726-96a8-4c54-8d55-27e398bf2233/OK___trabalho%2018%20-%20Surface%20Formation%20during%20micromilling%20of%20ultrafine%20grained%20low%20carbon%20steel%20%28euspen%202014%29%20%281%29.pdf
Trabalho de evento
Material removal evaluation in micro endmilling of RSA6061-T6 (2014)
Dib, Marcel Henrique Militão; Jasinevicius, Renato Goulart; Rigatti, Aldo Marcel Yoshida; Rodrigues, Alessandro Roger
Source: Proceedings. Conference titles: Euspen International Conference & Exibition. Unidade: EESC
Subjects: MOAGEM, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DIB, Marcel Henrique Militão et al. Material removal evaluation in micro endmilling of RSA6061-T6. 2014, Anais.. Dubrovnik, Croatia: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2014. Disponível em: https://www.euspen.eu/knowledge-base/ICE14-P6.45.pdf. Acesso em: 02 out. 2024.
APA
Dib, M. H. M., Jasinevicius, R. G., Rigatti, A. M. Y., & Rodrigues, A. R. (2014). Material removal evaluation in micro endmilling of RSA6061-T6. In Proceedings. Dubrovnik, Croatia: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://www.euspen.eu/knowledge-base/ICE14-P6.45.pdf
NLM
Dib MHM, Jasinevicius RG, Rigatti AMY, Rodrigues AR. Material removal evaluation in micro endmilling of RSA6061-T6 [Internet]. Proceedings. 2014 ;[citado 2024 out. 02 ] Available from: https://www.euspen.eu/knowledge-base/ICE14-P6.45.pdf
Vancouver
Dib MHM, Jasinevicius RG, Rigatti AMY, Rodrigues AR. Material removal evaluation in micro endmilling of RSA6061-T6 [Internet]. Proceedings. 2014 ;[citado 2024 out. 02 ] Available from: https://www.euspen.eu/knowledge-base/ICE14-P6.45.pdf

USP Schools

ReP

Filtros

Document Types

Departament

Authors

USP affiliated authors

Date published

Subjects

Source title

Publisher

Conference titles

Countries/Territories

Indexado em

Normalized affiliation

Non normalized affiliation