ReP USP - Resultado da busca

Artigo de periodico
Topology optimization method for screw-type pumping using a Multiple Reference Frame-based approach (2025)
Alonso, Diego Hayashi ; Meneghini, Julio Romano ; Silva, Emílio Carlos Nelli
Source: Applied mathematical modelling. Unidade: EP
Subjects: FLUXO DOS FLUÍDOS, MAQUINARIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALONSO, Diego Hayashi e MENEGHINI, Julio Romano e SILVA, Emílio Carlos Nelli. Topology optimization method for screw-type pumping using a Multiple Reference Frame-based approach. Applied mathematical modelling, v. 142, p. 1-17, 2025Tradução . . Disponível em: https://doi.org/10.1016/j.apm.2025.115982. Acesso em: 05 dez. 2025.
APA
Alonso, D. H., Meneghini, J. R., & Silva, E. C. N. (2025). Topology optimization method for screw-type pumping using a Multiple Reference Frame-based approach. Applied mathematical modelling, 142, 1-17. doi:10.1016/j.apm.2025.115982
NLM
Alonso DH, Meneghini JR, Silva ECN. Topology optimization method for screw-type pumping using a Multiple Reference Frame-based approach [Internet]. Applied mathematical modelling. 2025 ; 142 1-17.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.apm.2025.115982
Vancouver
Alonso DH, Meneghini JR, Silva ECN. Topology optimization method for screw-type pumping using a Multiple Reference Frame-based approach [Internet]. Applied mathematical modelling. 2025 ; 142 1-17.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.apm.2025.115982
Artigo de periodico
Experimental setup for labyrinth seals: pressure, temperature, mass flow rate, rotation velocity, and pressure drop simultaneous measurement (2025)
Ribeiro, Lucas Neves Braga Soares ; Freire, André Dantas ; Barros, Glycon Pena de Souza ; Maffei, Felipe Silva ; Azevedo, Anderson Soares da Costa ; Siqueira, Lucas Oliveira ; Alonso, Diego Hayashi ; Sanches, Renato Picelli ; Machado, Izabel Fernanda ; Sá, Luís Fernando Nogueira de ; Martinez, Carlos Barreira ; Meneghini, Julio Romano ; Silva, Emílio Carlos Nelli
Source: Review of scientific instruments. Unidade: EP
Subjects: DINÂMICA DOS FLUÍDOS COMPUTACIONAL, FLUXO DOS FLUÍDOS, MAQUINARIA, EFICIÊNCIA ENERGÉTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Lucas Neves Braga Soares et al. Experimental setup for labyrinth seals: pressure, temperature, mass flow rate, rotation velocity, and pressure drop simultaneous measurement. Review of scientific instruments, v. 96, n. Ja 2025, p. 1-8, 2025Tradução . . Disponível em: https://doi.org/10.1063/5.0232454. Acesso em: 05 dez. 2025.
APA
Ribeiro, L. N. B. S., Freire, A. D., Barros, G. P. de S., Maffei, F. S., Azevedo, A. S. da C., Siqueira, L. O., et al. (2025). Experimental setup for labyrinth seals: pressure, temperature, mass flow rate, rotation velocity, and pressure drop simultaneous measurement. Review of scientific instruments, 96( Ja 2025), 1-8. doi:10.1063/5.0232454
NLM
Ribeiro LNBS, Freire AD, Barros GP de S, Maffei FS, Azevedo AS da C, Siqueira LO, Alonso DH, Sanches RP, Machado IF, Sá LFN de, Martinez CB, Meneghini JR, Silva ECN. Experimental setup for labyrinth seals: pressure, temperature, mass flow rate, rotation velocity, and pressure drop simultaneous measurement [Internet]. Review of scientific instruments. 2025 ; 96( Ja 2025): 1-8.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1063/5.0232454
Vancouver
Ribeiro LNBS, Freire AD, Barros GP de S, Maffei FS, Azevedo AS da C, Siqueira LO, Alonso DH, Sanches RP, Machado IF, Sá LFN de, Martinez CB, Meneghini JR, Silva ECN. Experimental setup for labyrinth seals: pressure, temperature, mass flow rate, rotation velocity, and pressure drop simultaneous measurement [Internet]. Review of scientific instruments. 2025 ; 96( Ja 2025): 1-8.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1063/5.0232454
Artigo de periodico
Pixel-based shape optimization in 2D using constrained density-based topology optimization (2025)
Zegard, Tomás ; Diego Salinas; Silva, Emílio Carlos Nelli
Source: Engineering with computers. Unidade: EP
Subjects: PROJETO MECÂNICO, OTIMIZAÇÃO MATEMÁTICA, ALGORITMOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ZEGARD, Tomás e DIEGO SALINAS, e SILVA, Emílio Carlos Nelli. Pixel-based shape optimization in 2D using constrained density-based topology optimization. Engineering with computers, p. 1-13, 2025Tradução . . Disponível em: https://doi.org/10.1007/s00366-025-02129-9. Acesso em: 05 dez. 2025.
APA
Zegard, T., Diego Salinas,, & Silva, E. C. N. (2025). Pixel-based shape optimization in 2D using constrained density-based topology optimization. Engineering with computers, 1-13. doi:10.1007/s00366-025-02129-9
NLM
Zegard T, Diego Salinas, Silva ECN. Pixel-based shape optimization in 2D using constrained density-based topology optimization [Internet]. Engineering with computers. 2025 ; 1-13.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1007/s00366-025-02129-9
Vancouver
Zegard T, Diego Salinas, Silva ECN. Pixel-based shape optimization in 2D using constrained density-based topology optimization [Internet]. Engineering with computers. 2025 ; 1-13.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1007/s00366-025-02129-9
Artigo de periodico
Fiber orientation in brittle materials considering post-fracture behavior (2025)
Silva, Andre Luis Ferreira da ; Salas Varela, Ruben Andres ; Souza, Eduardo Moscatelli de ; Sá, Luís Fernando Nogueira de ; Silva, Emílio Carlos Nelli
Source: Composite structures. Unidade: EP
Subjects: CONCRETO REFORÇADO COM FIBRAS, MATERIAIS COMPÓSITOS DE FIBRAS ORIENTADAS, MECÂNICA DA FRATURA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Andre Luis Ferreira da et al. Fiber orientation in brittle materials considering post-fracture behavior. Composite structures, v. 368, p. Se 2025, 2025Tradução . . Disponível em: https://doi.org/10.1016/j.compstruct.2025.119244. Acesso em: 05 dez. 2025.
APA
Silva, A. L. F. da, Salas Varela, R. A., Souza, E. M. de, Sá, L. F. N. de, & Silva, E. C. N. (2025). Fiber orientation in brittle materials considering post-fracture behavior. Composite structures, 368, Se 2025. doi:10.1016/j.compstruct.2025.119244
NLM
Silva ALF da, Salas Varela RA, Souza EM de, Sá LFN de, Silva ECN. Fiber orientation in brittle materials considering post-fracture behavior [Internet]. Composite structures. 2025 ; 368 Se 2025.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.compstruct.2025.119244
Vancouver
Silva ALF da, Salas Varela RA, Souza EM de, Sá LFN de, Silva ECN. Fiber orientation in brittle materials considering post-fracture behavior [Internet]. Composite structures. 2025 ; 368 Se 2025.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.compstruct.2025.119244
Artigo de periodico
A multi-objective function for discrete topology optimization in labyrinth seal design problems (2025)
Azevedo, Anderson Soares da Costa ; Souza, Eduardo Moscatelli de ; Ribeiro, Lucas Neves Braga Soares ; Sá, Luís Fernando Nogueira de ; Silva, Emílio Carlos Nelli ; Sanches, Renato Picelli
Source: Advances in engineering software. Unidade: EP
Subjects: DINÂMICA DOS FLUÍDOS, PROJETO MECÂNICO, TOLERÂNCIA E AJUSTAGEM DAS PEÇAS, OTIMIZAÇÃO MATEMÁTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AZEVEDO, Anderson Soares da Costa et al. A multi-objective function for discrete topology optimization in labyrinth seal design problems. Advances in engineering software, v. 204, n. Ju 2025, p. 1-16, 2025Tradução . . Disponível em: https://doi.org/10.1016/j.advengsoft.2025.103894. Acesso em: 05 dez. 2025.
APA
Azevedo, A. S. da C., Souza, E. M. de, Ribeiro, L. N. B. S., Sá, L. F. N. de, Silva, E. C. N., & Sanches, R. P. (2025). A multi-objective function for discrete topology optimization in labyrinth seal design problems. Advances in engineering software, 204( Ju 2025), 1-16. doi:10.1016/j.advengsoft.2025.103894
NLM
Azevedo AS da C, Souza EM de, Ribeiro LNBS, Sá LFN de, Silva ECN, Sanches RP. A multi-objective function for discrete topology optimization in labyrinth seal design problems [Internet]. Advances in engineering software. 2025 ; 204( Ju 2025): 1-16.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.advengsoft.2025.103894
Vancouver
Azevedo AS da C, Souza EM de, Ribeiro LNBS, Sá LFN de, Silva ECN, Sanches RP. A multi-objective function for discrete topology optimization in labyrinth seal design problems [Internet]. Advances in engineering software. 2025 ; 204( Ju 2025): 1-16.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.advengsoft.2025.103894
Artigo de periodico
Topology optimization of external compressible flow (2025)
Carvalho, Icaro Amorim de ; Alonso, Diego Hayashi ; Garcia Rodriguez, Luis Fernando ; Maffei, Felipe Silva ; Silva, Emílio Carlos Nelli
Source: Physics of fluids. Unidade: EP
Subjects: FLUXO DOS FLUÍDOS, COMPRESSIBILIDADE DO FLUXO DOS FLUÍDOS, VISCOSIDADE DO FLUXO DOS FLUÍDOS, DINÂMICA DOS FLUÍDOS COMPUTACIONAL, OTIMIZAÇÃO MATEMÁTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CARVALHO, Icaro Amorim de et al. Topology optimization of external compressible flow. Physics of fluids, v. 37, n. 9, p. Se 2025, 2025Tradução . . Disponível em: https://doi.org/10.1063/5.0289424. Acesso em: 05 dez. 2025.
APA
Carvalho, I. A. de, Alonso, D. H., Garcia Rodriguez, L. F., Maffei, F. S., & Silva, E. C. N. (2025). Topology optimization of external compressible flow. Physics of fluids, 37( 9), Se 2025. doi:10.1063/5.0289424
NLM
Carvalho IA de, Alonso DH, Garcia Rodriguez LF, Maffei FS, Silva ECN. Topology optimization of external compressible flow [Internet]. Physics of fluids. 2025 ; 37( 9): Se 2025.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1063/5.0289424
Vancouver
Carvalho IA de, Alonso DH, Garcia Rodriguez LF, Maffei FS, Silva ECN. Topology optimization of external compressible flow [Internet]. Physics of fluids. 2025 ; 37( 9): Se 2025.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1063/5.0289424
Artigo de periodico
Modeling of erosion wear in labyrinths seals using CFD approach (2025)
Freire, André Dantas ; Seriacopi, Vanessa ; Silva, Emílio Carlos Nelli ; Machado, Izabel Fernanda
Source: Tribology : materials surfaces and interfaces. Unidade: EP
Subjects: DINÂMICA DOS FLUÍDOS COMPUTACIONAL, TOLERÂNCIA E AJUSTAGEM DAS PEÇAS, DESGASTE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FREIRE, André Dantas et al. Modeling of erosion wear in labyrinths seals using CFD approach. Tribology : materials surfaces and interfaces, v. 19, n. 1, p. 3-23, 2025Tradução . . Disponível em: https://doi.org/10.1177/17515831241303354. Acesso em: 05 dez. 2025.
APA
Freire, A. D., Seriacopi, V., Silva, E. C. N., & Machado, I. F. (2025). Modeling of erosion wear in labyrinths seals using CFD approach. Tribology : materials surfaces and interfaces, 19( 1), 3-23. doi:10.1177/17515831241303354
NLM
Freire AD, Seriacopi V, Silva ECN, Machado IF. Modeling of erosion wear in labyrinths seals using CFD approach [Internet]. Tribology : materials surfaces and interfaces. 2025 ; 19( 1): 3-23.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1177/17515831241303354
Vancouver
Freire AD, Seriacopi V, Silva ECN, Machado IF. Modeling of erosion wear in labyrinths seals using CFD approach [Internet]. Tribology : materials surfaces and interfaces. 2025 ; 19( 1): 3-23.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1177/17515831241303354
Artigo de periodico
Innovative use of UHPC and topology optimization in permeable interlocking pavers advancing: sustainable pavement solutions (2025)
Gadler, Fernanda; Mesquita, José Augusto Ferreira Sales de ; Oliveira, Francisco Helio Alencar; Bernucci, Liedi Légi Bariani ; Pileggi, Rafael Giuliano ; Silva, Emílio Carlos Nelli ; Prado, Diego Silva
Source: Sustainability. Unidade: EP
Subjects: PAVIMENTOS FLEXÍVEIS, ENCHENTES URBANAS, CONCRETO DE ALTO DESEMPENHO, INFRAESTRUTURA URBANA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GADLER, Fernanda et al. Innovative use of UHPC and topology optimization in permeable interlocking pavers advancing: sustainable pavement solutions. Sustainability, v. 17, n. 13, p. 19 , 2025Tradução . . Disponível em: https://doi.org/10.3390/su17136039. Acesso em: 05 dez. 2025.
APA
Gadler, F., Mesquita, J. A. F. S. de, Oliveira, F. H. A., Bernucci, L. L. B., Pileggi, R. G., Silva, E. C. N., & Prado, D. S. (2025). Innovative use of UHPC and topology optimization in permeable interlocking pavers advancing: sustainable pavement solutions. Sustainability, 17( 13), 19 . doi:10.3390/su17136039
NLM
Gadler F, Mesquita JAFS de, Oliveira FHA, Bernucci LLB, Pileggi RG, Silva ECN, Prado DS. Innovative use of UHPC and topology optimization in permeable interlocking pavers advancing: sustainable pavement solutions [Internet]. Sustainability. 2025 ; 17( 13): 19 .[citado 2025 dez. 05 ] Available from: https://doi.org/10.3390/su17136039
Vancouver
Gadler F, Mesquita JAFS de, Oliveira FHA, Bernucci LLB, Pileggi RG, Silva ECN, Prado DS. Innovative use of UHPC and topology optimization in permeable interlocking pavers advancing: sustainable pavement solutions [Internet]. Sustainability. 2025 ; 17( 13): 19 .[citado 2025 dez. 05 ] Available from: https://doi.org/10.3390/su17136039
Artigo de periodico
Turbulence effects in the topology optimization of compressible subsonic flow (2025)
Garcia Rodriguez, Luis Fernando ; Alonso, Diego Hayashi ; Silva, Emílio Carlos Nelli
Source: International journal for numerical methods in fluids. Unidade: EP
Subjects: FLUXO TURBULENTO DOS FLUÍDOS, COMPRESSIBILIDADE DO FLUXO DOS FLUÍDOS, MÉTODOS NUMÉRICOS DE OTIMIZAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GARCIA RODRIGUEZ, Luis Fernando e ALONSO, Diego Hayashi e SILVA, Emílio Carlos Nelli. Turbulence effects in the topology optimization of compressible subsonic flow. International journal for numerical methods in fluids, v. 97, n. Ja 2025, p. 44-68, 2025Tradução . . Disponível em: https://doi.org/10.1002/fld.5338. Acesso em: 05 dez. 2025.
APA
Garcia Rodriguez, L. F., Alonso, D. H., & Silva, E. C. N. (2025). Turbulence effects in the topology optimization of compressible subsonic flow. International journal for numerical methods in fluids, 97( Ja 2025), 44-68. doi:10.1002/fld.5338
NLM
Garcia Rodriguez LF, Alonso DH, Silva ECN. Turbulence effects in the topology optimization of compressible subsonic flow [Internet]. International journal for numerical methods in fluids. 2025 ; 97( Ja 2025): 44-68.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1002/fld.5338
Vancouver
Garcia Rodriguez LF, Alonso DH, Silva ECN. Turbulence effects in the topology optimization of compressible subsonic flow [Internet]. International journal for numerical methods in fluids. 2025 ; 97( Ja 2025): 44-68.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1002/fld.5338
Artigo de periodico
Topology optimization of labyrinth seals using interface identification techniques (2024)
Souza, Eduardo Moscatelli de ; Andreasen, Casper Schousboe ; Aage, Niels ; Sanches, Renato Picelli ; Silva, Emílio Carlos Nelli
Source: Computer methods in applied mechanics and engineering. Unidade: EP
Subjects: FLUXO DOS FLUÍDOS, TOLERÂNCIA E AJUSTAGEM DAS PEÇAS, OTIMIZAÇÃO MATEMÁTICA, ALGORITMOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUZA, Eduardo Moscatelli de et al. Topology optimization of labyrinth seals using interface identification techniques. Computer methods in applied mechanics and engineering, v. 420, p. 1-29, 2024Tradução . . Disponível em: https://doi.org/10.1016/j.cma.2023.116716. Acesso em: 05 dez. 2025.
APA
Souza, E. M. de, Andreasen, C. S., Aage, N., Sanches, R. P., & Silva, E. C. N. (2024). Topology optimization of labyrinth seals using interface identification techniques. Computer methods in applied mechanics and engineering, 420, 1-29. doi:10.1016/j.cma.2023.116716
NLM
Souza EM de, Andreasen CS, Aage N, Sanches RP, Silva ECN. Topology optimization of labyrinth seals using interface identification techniques [Internet]. Computer methods in applied mechanics and engineering. 2024 ; 420 1-29.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.cma.2023.116716
Vancouver
Souza EM de, Andreasen CS, Aage N, Sanches RP, Silva ECN. Topology optimization of labyrinth seals using interface identification techniques [Internet]. Computer methods in applied mechanics and engineering. 2024 ; 420 1-29.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.cma.2023.116716
Artigo de periodico
Topology optimization design of labyrinth seal-type devices considering subsonic compressible turbulent flow conditions (2024)
Sá, Luís Fernando Nogueira de ; Maffei, Felipe Silva ; Ribeiro, Lucas Neves Braga Soares ; Meneghini, Julio Romano ; Silva, Emílio Carlos Nelli
Source: Computers and mathematics with applications. Unidade: EP
Subjects: DINÂMICA DOS FLUÍDOS COMPUTACIONAL, FLUXO TURBULENTO DOS FLUÍDOS, TOLERÂNCIA E AJUSTAGEM DAS PEÇAS, MATEMÁTICA APLICADA, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SÁ, Luís Fernando Nogueira de et al. Topology optimization design of labyrinth seal-type devices considering subsonic compressible turbulent flow conditions. Computers and mathematics with applications, v. 176, p. 306-323, 2024Tradução . . Disponível em: https://doi.org/10.1016/j.camwa.2024.10.029. Acesso em: 05 dez. 2025.
APA
Sá, L. F. N. de, Maffei, F. S., Ribeiro, L. N. B. S., Meneghini, J. R., & Silva, E. C. N. (2024). Topology optimization design of labyrinth seal-type devices considering subsonic compressible turbulent flow conditions. Computers and mathematics with applications, 176, 306-323. doi:10.1016/j.camwa.2024.10.029
NLM
Sá LFN de, Maffei FS, Ribeiro LNBS, Meneghini JR, Silva ECN. Topology optimization design of labyrinth seal-type devices considering subsonic compressible turbulent flow conditions [Internet]. Computers and mathematics with applications. 2024 ; 176 306-323.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.camwa.2024.10.029
Vancouver
Sá LFN de, Maffei FS, Ribeiro LNBS, Meneghini JR, Silva ECN. Topology optimization design of labyrinth seal-type devices considering subsonic compressible turbulent flow conditions [Internet]. Computers and mathematics with applications. 2024 ; 176 306-323.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.camwa.2024.10.029
Artigo de periodico
Topology optimization of radial flow field PEM fuel cells for enhancing water management (2024)
Razmara, Fereshteh ; Sá, Luís Fernando Nogueira de ; Prado, Diego Silva ; Lopes, Thiago ; Meneghini, Julio Romano ; Silva, Emílio Carlos Nelli
Source: Structural and multidisciplinary optimization. Unidade: EP
Subjects: DINÂMICA DOS FLUÍDOS COMPUTACIONAL, CÉLULAS A COMBUSTÍVEL, ÁGUA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RAZMARA, Fereshteh et al. Topology optimization of radial flow field PEM fuel cells for enhancing water management. Structural and multidisciplinary optimization, v. 67, p. 1-21, 2024Tradução . . Disponível em: https://doi.org/10.1007/s00158-024-03788-w. Acesso em: 05 dez. 2025.
APA
Razmara, F., Sá, L. F. N. de, Prado, D. S., Lopes, T., Meneghini, J. R., & Silva, E. C. N. (2024). Topology optimization of radial flow field PEM fuel cells for enhancing water management. Structural and multidisciplinary optimization, 67, 1-21. doi:10.1007/s00158-024-03788-w
NLM
Razmara F, Sá LFN de, Prado DS, Lopes T, Meneghini JR, Silva ECN. Topology optimization of radial flow field PEM fuel cells for enhancing water management [Internet]. Structural and multidisciplinary optimization. 2024 ; 67 1-21.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1007/s00158-024-03788-w
Vancouver
Razmara F, Sá LFN de, Prado DS, Lopes T, Meneghini JR, Silva ECN. Topology optimization of radial flow field PEM fuel cells for enhancing water management [Internet]. Structural and multidisciplinary optimization. 2024 ; 67 1-21.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1007/s00158-024-03788-w
Artigo de periodico
Design of topology-optimized functionally graded porous structures under transient loads (2024)
Ramírez-Gil, Francisco Javier ; Silva, Emílio Carlos Nelli ; Montealegre Rubio, Wilfredo
Source: International journal of mechanical sciences. Unidade: EP
Subjects: DINÂMICA DAS ESTRUTURAS, CARREGAMENTO NAS ESTRUTURAS, PROJETO MECÂNICO, MATERIAIS POROSOS, MÉTODOS NUMÉRICOS DE OTIMIZAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RAMÍREZ-GIL, Francisco Javier e SILVA, Emílio Carlos Nelli e MONTEALEGRE RUBIO, Wilfredo. Design of topology-optimized functionally graded porous structures under transient loads. International journal of mechanical sciences, v. 284, p. 1-17, 2024Tradução . . Disponível em: https://doi.org/10.1016/j.ijmecsci.2024.109732. Acesso em: 05 dez. 2025.
APA
Ramírez-Gil, F. J., Silva, E. C. N., & Montealegre Rubio, W. (2024). Design of topology-optimized functionally graded porous structures under transient loads. International journal of mechanical sciences, 284, 1-17. doi:10.1016/j.ijmecsci.2024.109732
NLM
Ramírez-Gil FJ, Silva ECN, Montealegre Rubio W. Design of topology-optimized functionally graded porous structures under transient loads [Internet]. International journal of mechanical sciences. 2024 ;284 1-17.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.ijmecsci.2024.109732
Vancouver
Ramírez-Gil FJ, Silva ECN, Montealegre Rubio W. Design of topology-optimized functionally graded porous structures under transient loads [Internet]. International journal of mechanical sciences. 2024 ;284 1-17.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.ijmecsci.2024.109732
Artigo de periodico
Transition flight of a concept of lifting-wing quadcopter (2024)
Daud Filho, Antonio Carlos; Silva, Emílio Carlos Nelli ; Silva, José Reinaldo ; Caurin, Glauco Augusto de Paula ; Belo, Eduardo Morgado
Source: The Aeronautical Journal. Unidades: EESC, EP
Subjects: DINÂMICA DE VOO, TRAJETÓRIA, AERODINÂMICA DE AERONAVES, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DAUD FILHO, Antonio Carlos et al. Transition flight of a concept of lifting-wing quadcopter. The Aeronautical Journal, p. 1-21, 2024Tradução . . Disponível em: https://dx.doi.org/10.1017/aer.2024.100. Acesso em: 05 dez. 2025.
APA
Daud Filho, A. C., Silva, E. C. N., Silva, J. R., Caurin, G. A. de P., & Belo, E. M. (2024). Transition flight of a concept of lifting-wing quadcopter. The Aeronautical Journal, 1-21. doi:10.1017/aer.2024.100
NLM
Daud Filho AC, Silva ECN, Silva JR, Caurin GA de P, Belo EM. Transition flight of a concept of lifting-wing quadcopter [Internet]. The Aeronautical Journal. 2024 ; 1-21.[citado 2025 dez. 05 ] Available from: https://dx.doi.org/10.1017/aer.2024.100
Vancouver
Daud Filho AC, Silva ECN, Silva JR, Caurin GA de P, Belo EM. Transition flight of a concept of lifting-wing quadcopter [Internet]. The Aeronautical Journal. 2024 ; 1-21.[citado 2025 dez. 05 ] Available from: https://dx.doi.org/10.1017/aer.2024.100
Artigo de periodico
On the multi-objective perspective of discrete topology optimization in fluid-structure interaction problems (2024)
Azevedo, Anderson Soares da Costa; Ranjbarzadeh, Shahin ; Gioria, Rafael dos Santos ; Silva, Emílio Carlos Nelli ; Sanches, Renato Picelli
Source: Applied Mathematical Modeling. Unidade: EP
Subjects: TOPOLOGIA, INTERAÇÃO FLUIDO-ESTRUTURA, INTERPOLAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AZEVEDO, Anderson Soares da Costa et al. On the multi-objective perspective of discrete topology optimization in fluid-structure interaction problems. Applied Mathematical Modeling, v. 127, p. 1-17, 2024Tradução . . Disponível em: https://doi.org/10.1016/j.apm.2023.11.024. Acesso em: 05 dez. 2025.
APA
Azevedo, A. S. da C., Ranjbarzadeh, S., Gioria, R. dos S., Silva, E. C. N., & Sanches, R. P. (2024). On the multi-objective perspective of discrete topology optimization in fluid-structure interaction problems. Applied Mathematical Modeling, 127, 1-17. doi:10.1016/j.apm.2023.11.024
NLM
Azevedo AS da C, Ranjbarzadeh S, Gioria R dos S, Silva ECN, Sanches RP. On the multi-objective perspective of discrete topology optimization in fluid-structure interaction problems [Internet]. Applied Mathematical Modeling. 2024 ; 127 1-17.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.apm.2023.11.024
Vancouver
Azevedo AS da C, Ranjbarzadeh S, Gioria R dos S, Silva ECN, Sanches RP. On the multi-objective perspective of discrete topology optimization in fluid-structure interaction problems [Internet]. Applied Mathematical Modeling. 2024 ; 127 1-17.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.apm.2023.11.024
Artigo de periodico
Topology optimization of stationary fluid–structure interaction problems considering a natural frequency constraint for vortex-induced vibrations attenuation (2024)
Siqueira, Lucas Oliveira ; Silva, Kamilla Emily Santos ; Silva, Emílio Carlos Nelli ; Sanches, Renato Picelli
Source: Finite elements in analysis and design. Unidade: EP
Subjects: INTERAÇÃO FLUIDO-ESTRUTURA, VIBRAÇÕES, VÓRTICES DOS FLUÍDOS, MÉTODOS NUMÉRICOS DE OTIMIZAÇÃO, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SIQUEIRA, Lucas Oliveira et al. Topology optimization of stationary fluid–structure interaction problems considering a natural frequency constraint for vortex-induced vibrations attenuation. Finite elements in analysis and design, v. 234, p. 1-21, 2024Tradução . . Disponível em: https://doi.org/10.1016/j.finel.2024.104137. Acesso em: 05 dez. 2025.
APA
Siqueira, L. O., Silva, K. E. S., Silva, E. C. N., & Sanches, R. P. (2024). Topology optimization of stationary fluid–structure interaction problems considering a natural frequency constraint for vortex-induced vibrations attenuation. Finite elements in analysis and design, 234, 1-21. doi:10.1016/j.finel.2024.104137
NLM
Siqueira LO, Silva KES, Silva ECN, Sanches RP. Topology optimization of stationary fluid–structure interaction problems considering a natural frequency constraint for vortex-induced vibrations attenuation [Internet]. Finite elements in analysis and design. 2024 ; 234 1-21.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.finel.2024.104137
Vancouver
Siqueira LO, Silva KES, Silva ECN, Sanches RP. Topology optimization of stationary fluid–structure interaction problems considering a natural frequency constraint for vortex-induced vibrations attenuation [Internet]. Finite elements in analysis and design. 2024 ; 234 1-21.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.finel.2024.104137
Artigo de periodico
Topology optimization for stationary fluid–structure interaction problems with turbulent flow via sequential integer linear programming and smooth explicit boundaries (2024)
Siqueira, Lucas Oliveira ; Cortez, Rômulo Luz ; Sivapuram, Raghavendra ; Ranjbarzadeh, Shahin ; Gioria, Rafael dos Santos ; Silva, Emílio Carlos Nelli ; Sanches, Renato Picelli
Source: Advances in engineering software. Unidade: EP
Subjects: INTERAÇÃO FLUIDO-ESTRUTURA, FLUXO TURBULENTO DOS FLUÍDOS, MÉTODOS NUMÉRICOS DE OTIMIZAÇÃO, PROGRAMAÇÃO LINEAR, TOPOLOGIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SIQUEIRA, Lucas Oliveira et al. Topology optimization for stationary fluid–structure interaction problems with turbulent flow via sequential integer linear programming and smooth explicit boundaries. Advances in engineering software, v. 190, p. 1-20, 2024Tradução . . Disponível em: https://doi.org/10.1016/j.advengsoft.2024.103599. Acesso em: 05 dez. 2025.
APA
Siqueira, L. O., Cortez, R. L., Sivapuram, R., Ranjbarzadeh, S., Gioria, R. dos S., Silva, E. C. N., & Sanches, R. P. (2024). Topology optimization for stationary fluid–structure interaction problems with turbulent flow via sequential integer linear programming and smooth explicit boundaries. Advances in engineering software, 190, 1-20. doi:10.1016/j.advengsoft.2024.103599
NLM
Siqueira LO, Cortez RL, Sivapuram R, Ranjbarzadeh S, Gioria R dos S, Silva ECN, Sanches RP. Topology optimization for stationary fluid–structure interaction problems with turbulent flow via sequential integer linear programming and smooth explicit boundaries [Internet]. Advances in engineering software. 2024 ; 190 1-20.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.advengsoft.2024.103599
Vancouver
Siqueira LO, Cortez RL, Sivapuram R, Ranjbarzadeh S, Gioria R dos S, Silva ECN, Sanches RP. Topology optimization for stationary fluid–structure interaction problems with turbulent flow via sequential integer linear programming and smooth explicit boundaries [Internet]. Advances in engineering software. 2024 ; 190 1-20.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.advengsoft.2024.103599
Artigo de periodico
Topology optimization for flow machine rotor design considering resonance and low mass density flows (2024)
Alonso, Diego Hayashi ; Sanches, Renato Picelli ; Meneghini, Julio Romano ; Silva, Emílio Carlos Nelli
Source: Applied mathematical modelling. Unidade: EP
Subjects: DINÂMICA DOS FLUÍDOS COMPUTACIONAL, COMPRESSIBILIDADE DO FLUXO DOS FLUÍDOS, MATEMÁTICA APLICADA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALONSO, Diego Hayashi et al. Topology optimization for flow machine rotor design considering resonance and low mass density flows. Applied mathematical modelling, v. 129, p. 806-822, 2024Tradução . . Disponível em: https://doi.org/10.1016/j.apm.2024.02.008. Acesso em: 05 dez. 2025.
APA
Alonso, D. H., Sanches, R. P., Meneghini, J. R., & Silva, E. C. N. (2024). Topology optimization for flow machine rotor design considering resonance and low mass density flows. Applied mathematical modelling, 129, 806-822. doi:10.1016/j.apm.2024.02.008
NLM
Alonso DH, Sanches RP, Meneghini JR, Silva ECN. Topology optimization for flow machine rotor design considering resonance and low mass density flows [Internet]. Applied mathematical modelling. 2024 ; 129 806-822.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.apm.2024.02.008
Vancouver
Alonso DH, Sanches RP, Meneghini JR, Silva ECN. Topology optimization for flow machine rotor design considering resonance and low mass density flows [Internet]. Applied mathematical modelling. 2024 ; 129 806-822.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1016/j.apm.2024.02.008
Artigo de periodico
Design of solid oxide fuel cell (SOFC) channel layout using the topology optimization method with a design variable propagation approach (2024)
Gonçalves, Juliano Fagundes ; Sá, Luís Fernando Nogueira de ; Lopes, Thiago ; Meneghini, Julio Romano ; Silva, Emílio Carlos Nelli
Source: Structural and multidisciplinary optimization. Unidade: EP
Subjects: CÉLULAS A COMBUSTÍVEL, MATEMÁTICA APLICADA, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GONÇALVES, Juliano Fagundes et al. Design of solid oxide fuel cell (SOFC) channel layout using the topology optimization method with a design variable propagation approach. Structural and multidisciplinary optimization, v. 67, p. 1-28, 2024Tradução . . Disponível em: https://doi.org/10.1007/s00158-024-03943-3. Acesso em: 05 dez. 2025.
APA
Gonçalves, J. F., Sá, L. F. N. de, Lopes, T., Meneghini, J. R., & Silva, E. C. N. (2024). Design of solid oxide fuel cell (SOFC) channel layout using the topology optimization method with a design variable propagation approach. Structural and multidisciplinary optimization, 67, 1-28. doi:10.1007/s00158-024-03943-3
NLM
Gonçalves JF, Sá LFN de, Lopes T, Meneghini JR, Silva ECN. Design of solid oxide fuel cell (SOFC) channel layout using the topology optimization method with a design variable propagation approach [Internet]. Structural and multidisciplinary optimization. 2024 ; 67 1-28.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1007/s00158-024-03943-3
Vancouver
Gonçalves JF, Sá LFN de, Lopes T, Meneghini JR, Silva ECN. Design of solid oxide fuel cell (SOFC) channel layout using the topology optimization method with a design variable propagation approach [Internet]. Structural and multidisciplinary optimization. 2024 ; 67 1-28.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1007/s00158-024-03943-3
Artigo de periodico
Body-fitted topology optimization via integer linear programming using surface capturing techniques (2024)
Azevedo, Anderson Soares da Costa ; Li, Hao ; Ishida, Naoyuki ; Siqueira, Lucas Oliveira ; Cortez, Rômulo Luz ; Silva, Emílio Carlos Nelli ; Nishiwaki, Shinji ; Sanches, Renato Picelli
Source: International journal for numerical methods in engineering. Unidade: EP
Subjects: INTERAÇÃO FLUIDO-ESTRUTURA, PROJETO MECÂNICO, CURVAS E SUPERFÍCIES (GEOMETRIA E MODELAGEM COMPUTACIONAL), MÉTODOS NUMÉRICOS DE OTIMIZAÇÃO, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AZEVEDO, Anderson Soares da Costa et al. Body-fitted topology optimization via integer linear programming using surface capturing techniques. International journal for numerical methods in engineering, v. 125, n. 13, p. 1-25, 2024Tradução . . Disponível em: https://doi.org/10.1002/nme.7480. Acesso em: 05 dez. 2025.
APA
Azevedo, A. S. da C., Li, H., Ishida, N., Siqueira, L. O., Cortez, R. L., Silva, E. C. N., et al. (2024). Body-fitted topology optimization via integer linear programming using surface capturing techniques. International journal for numerical methods in engineering, 125( 13), 1-25. doi:10.1002/nme.7480
NLM
Azevedo AS da C, Li H, Ishida N, Siqueira LO, Cortez RL, Silva ECN, Nishiwaki S, Sanches RP. Body-fitted topology optimization via integer linear programming using surface capturing techniques [Internet]. International journal for numerical methods in engineering. 2024 ; 125( 13): 1-25.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1002/nme.7480
Vancouver
Azevedo AS da C, Li H, Ishida N, Siqueira LO, Cortez RL, Silva ECN, Nishiwaki S, Sanches RP. Body-fitted topology optimization via integer linear programming using surface capturing techniques [Internet]. International journal for numerical methods in engineering. 2024 ; 125( 13): 1-25.[citado 2025 dez. 05 ] Available from: https://doi.org/10.1002/nme.7480

USP Schools

ReP

Filtros

Document Types

Departament

Authors

USP affiliated authors

Date published

Subjects

Source title

Publisher

Conference titles

Countries/Territories

Funding Agencies

Indexado em

Non normalized affiliation

Countries of institutions of collaboration