ReP USP - Resultado da busca

Artigo de periodico
Rotor frequency response self-identifcation using an active tilting-pad bearing (2024)
Silva, Heitor Antonio Pereira da; Nicoletti, Rodrigo
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: ELETROMAGNETISMO, LUBRIFICAÇÃO, ROTOR, ROLAMENTOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Heitor Antonio Pereira da e NICOLETTI, Rodrigo. Rotor frequency response self-identifcation using an active tilting-pad bearing. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 46, p. 1-12, 2024Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-024-05051-1. Acesso em: 16 out. 2024.
APA
Silva, H. A. P. da, & Nicoletti, R. (2024). Rotor frequency response self-identifcation using an active tilting-pad bearing. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46, 1-12. doi:10.1007/s40430-024-05051-1
NLM
Silva HAP da, Nicoletti R. Rotor frequency response self-identifcation using an active tilting-pad bearing [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-12.[citado 2024 out. 16 ] Available from: https://dx.doi.org/10.1007/s40430-024-05051-1
Vancouver
Silva HAP da, Nicoletti R. Rotor frequency response self-identifcation using an active tilting-pad bearing [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-12.[citado 2024 out. 16 ] Available from: https://dx.doi.org/10.1007/s40430-024-05051-1
Artigo de periodico
Comparison of experimental results with numerical simulation of thermal performance in car radiator using MWCNT/EG/water nanofuid (2024)
Nascimento, Erick Oliveira do; Cardenas Contreras, Edwin Martin; Cabezas Gómez, Luben ; Bandarra Filho, Enio Pedone
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: TRANSFERÊNCIA DE CALOR, DINÂMICA DOS FLUÍDOS COMPUTACIONAL, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
NASCIMENTO, Erick Oliveira do et al. Comparison of experimental results with numerical simulation of thermal performance in car radiator using MWCNT/EG/water nanofuid. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 46, p. 1-16, 2024Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-024-05013-7. Acesso em: 16 out. 2024.
APA
Nascimento, E. O. do, Cardenas Contreras, E. M., Cabezas Gómez, L., & Bandarra Filho, E. P. (2024). Comparison of experimental results with numerical simulation of thermal performance in car radiator using MWCNT/EG/water nanofuid. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46, 1-16. doi:10.1007/s40430-024-05013-7
NLM
Nascimento EO do, Cardenas Contreras EM, Cabezas Gómez L, Bandarra Filho EP. Comparison of experimental results with numerical simulation of thermal performance in car radiator using MWCNT/EG/water nanofuid [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-16.[citado 2024 out. 16 ] Available from: https://dx.doi.org/10.1007/s40430-024-05013-7
Vancouver
Nascimento EO do, Cardenas Contreras EM, Cabezas Gómez L, Bandarra Filho EP. Comparison of experimental results with numerical simulation of thermal performance in car radiator using MWCNT/EG/water nanofuid [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-16.[citado 2024 out. 16 ] Available from: https://dx.doi.org/10.1007/s40430-024-05013-7
Artigo de periodico
Study of creep and creep crack growth fatigue of aging ASTM A297/ A297M-19 HP steel modifed with niobium (2024)
Gatti, Maria Cristina Adami; Bose Filho, Waldek Wladimir ; Carvalho, M. C.; Ruchert, Cassius Olívio Figueiredo Terra
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidades: EESC, EEL
Subjects: AÇO, NIÓBIO, FADIGA DOS MATERIAIS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GATTI, Maria Cristina Adami et al. Study of creep and creep crack growth fatigue of aging ASTM A297/ A297M-19 HP steel modifed with niobium. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 46, n. 9, p. 1-16, 2024Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-024-05137-w. Acesso em: 16 out. 2024.
APA
Gatti, M. C. A., Bose Filho, W. W., Carvalho, M. C., & Ruchert, C. O. F. T. (2024). Study of creep and creep crack growth fatigue of aging ASTM A297/ A297M-19 HP steel modifed with niobium. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46( 9), 1-16. doi:10.1007/s40430-024-05137-w
NLM
Gatti MCA, Bose Filho WW, Carvalho MC, Ruchert COFT. Study of creep and creep crack growth fatigue of aging ASTM A297/ A297M-19 HP steel modifed with niobium [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46( 9): 1-16.[citado 2024 out. 16 ] Available from: https://dx.doi.org/10.1007/s40430-024-05137-w
Vancouver
Gatti MCA, Bose Filho WW, Carvalho MC, Ruchert COFT. Study of creep and creep crack growth fatigue of aging ASTM A297/ A297M-19 HP steel modifed with niobium [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46( 9): 1-16.[citado 2024 out. 16 ] Available from: https://dx.doi.org/10.1007/s40430-024-05137-w
Artigo de periodico
Ankle torque estimation based on disturbance observers for robotic rehabilitation (2024)
Jaimes, Jonathan Campo ; Orjuela Cañón, Alvaro D.; Siqueira, Adriano Almeida Gonçalves
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: ARTICULAÇÕES, TORNOZELO, ROBÓTICA, FILTROS DE KALMAN, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JAIMES, Jonathan Campo e ORJUELA CAÑÓN, Alvaro D. e SIQUEIRA, Adriano Almeida Gonçalves. Ankle torque estimation based on disturbance observers for robotic rehabilitation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 46, p. 1-16, 2024Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-024-05132-1. Acesso em: 16 out. 2024.
APA
Jaimes, J. C., Orjuela Cañón, A. D., & Siqueira, A. A. G. (2024). Ankle torque estimation based on disturbance observers for robotic rehabilitation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46, 1-16. doi:10.1007/s40430-024-05132-1
NLM
Jaimes JC, Orjuela Cañón AD, Siqueira AAG. Ankle torque estimation based on disturbance observers for robotic rehabilitation [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-16.[citado 2024 out. 16 ] Available from: https://dx.doi.org/10.1007/s40430-024-05132-1
Vancouver
Jaimes JC, Orjuela Cañón AD, Siqueira AAG. Ankle torque estimation based on disturbance observers for robotic rehabilitation [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-16.[citado 2024 out. 16 ] Available from: https://dx.doi.org/10.1007/s40430-024-05132-1
Artigo de periodico
Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty (2024)
Marini, Vinicius K.; Sorban, Bruno A.; Silva, Maíra Martins da ; Bortolussi, Roberto; Fleury, Agenor de Toledo ; Trigo, Flávio Celso
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidades: EESC, EP
Subjects: MOTORES DE COMBUSTÃO INTERNA, VEÍCULOS ELÉTRICOS, DINÂMICA VEICULAR, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARINI, Vinicius K. et al. Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 46, p. 1-14, 2024Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-023-04604-0. Acesso em: 16 out. 2024.
APA
Marini, V. K., Sorban, B. A., Silva, M. M. da, Bortolussi, R., Fleury, A. de T., & Trigo, F. C. (2024). Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46, 1-14. doi:10.1007/s40430-023-04604-0
NLM
Marini VK, Sorban BA, Silva MM da, Bortolussi R, Fleury A de T, Trigo FC. Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-14.[citado 2024 out. 16 ] Available from: https://dx.doi.org/10.1007/s40430-023-04604-0
Vancouver
Marini VK, Sorban BA, Silva MM da, Bortolussi R, Fleury A de T, Trigo FC. Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-14.[citado 2024 out. 16 ] Available from: https://dx.doi.org/10.1007/s40430-023-04604-0
Artigo de periodico
Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units (2024)
Martins, Ivan Talão; Fariñas Alvariño, Pablo; Cabezas Gómez, Luben
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: TRELIÇAS, FENÔMENOS DE TRANSPORTE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTINS, Ivan Talão e FARIÑAS ALVARIÑO, Pablo e CABEZAS GÓMEZ, Luben. Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 46, p. 1-28, 2024Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-024-04905-y. Acesso em: 16 out. 2024.
APA
Martins, I. T., Fariñas Alvariño, P., & Cabezas Gómez, L. (2024). Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46, 1-28. doi:10.1007/s40430-024-04905-y
NLM
Martins IT, Fariñas Alvariño P, Cabezas Gómez L. Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-28.[citado 2024 out. 16 ] Available from: https://dx.doi.org/10.1007/s40430-024-04905-y
Vancouver
Martins IT, Fariñas Alvariño P, Cabezas Gómez L. Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-28.[citado 2024 out. 16 ] Available from: https://dx.doi.org/10.1007/s40430-024-04905-y
Artigo de periodico
Artifcial neural networks for PIO events classifcation comparing diferent data collection procedures (2024)
Bruschi, Adriano Ghigiarelli; Drewiacki, Daniel; Bidinotto, Jorge Henrique
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: VOO (ENGENHARIA AERONÁUTICA), VOO (ENGENHARIA AERONÁUTICA), REDES NEURAIS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BRUSCHI, Adriano Ghigiarelli e DREWIACKI, Daniel e BIDINOTTO, Jorge Henrique. Artifcial neural networks for PIO events classifcation comparing diferent data collection procedures. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 46, p. 1-10, 2024Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-024-05070-y. Acesso em: 16 out. 2024.
APA
Bruschi, A. G., Drewiacki, D., & Bidinotto, J. H. (2024). Artifcial neural networks for PIO events classifcation comparing diferent data collection procedures. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46, 1-10. doi:10.1007/s40430-024-05070-y
NLM
Bruschi AG, Drewiacki D, Bidinotto JH. Artifcial neural networks for PIO events classifcation comparing diferent data collection procedures [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-10.[citado 2024 out. 16 ] Available from: https://dx.doi.org/10.1007/s40430-024-05070-y
Vancouver
Bruschi AG, Drewiacki D, Bidinotto JH. Artifcial neural networks for PIO events classifcation comparing diferent data collection procedures [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-10.[citado 2024 out. 16 ] Available from: https://dx.doi.org/10.1007/s40430-024-05070-y
Artigo de periodico
Investigation of rock porosity using vibroacoustography (2024)
Uliana, João Henrique ; Braz, Guilherme de Araújo ; Oliveira, Everton Lucas de; Ferreira, Arthur Gustavo de Araújo ; Morais, Mateus Mota ; Trevizan, Willian Andrighetto; Fortulan, Carlos Alberto ; Bonagamba, Tito José ; Pavan, Theo Zeferino ; Carneiro, Antonio Adilton Oliveira
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidades: EESC, IFSC, FFCLRP
Subjects: CRISTALOGRAFIA, POROSIDADE DO SOLO, ULTRASSOM, RESSONÂNCIA MAGNÉTICA NUCLEAR
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ULIANA, João Henrique et al. Investigation of rock porosity using vibroacoustography. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 46, n. 10, p. 585-1-585-11, 2024Tradução . . Disponível em: https://doi.org/10.1007/s40430-024-05141-0. Acesso em: 16 out. 2024.
APA
Uliana, J. H., Braz, G. de A., Oliveira, E. L. de, Ferreira, A. G. de A., Morais, M. M., Trevizan, W. A., et al. (2024). Investigation of rock porosity using vibroacoustography. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46( 10), 585-1-585-11. doi:10.1007/s40430-024-05141-0
NLM
Uliana JH, Braz G de A, Oliveira EL de, Ferreira AG de A, Morais MM, Trevizan WA, Fortulan CA, Bonagamba TJ, Pavan TZ, Carneiro AAO. Investigation of rock porosity using vibroacoustography [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46( 10): 585-1-585-11.[citado 2024 out. 16 ] Available from: https://doi.org/10.1007/s40430-024-05141-0
Vancouver
Uliana JH, Braz G de A, Oliveira EL de, Ferreira AG de A, Morais MM, Trevizan WA, Fortulan CA, Bonagamba TJ, Pavan TZ, Carneiro AAO. Investigation of rock porosity using vibroacoustography [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46( 10): 585-1-585-11.[citado 2024 out. 16 ] Available from: https://doi.org/10.1007/s40430-024-05141-0
Artigo de periodico
Fatigue crack propagation of API 5L X70 steel in a modifed simulated fuel-grade ethanol (MSFGE) environment (2023)
Marcomini, José Benedito; Santos, Elielson Alves dos; Sordi, Vitor Luiz; Giorgetti, Vinicius; Rovere, Carlos Alberto Della; Baptista, Carlos Antonio Reis Pereira; Paes, Marcelo
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidades: EESC, EEL
Subjects: ETANOL, COMBUSTÍVEIS, FADIGA DOS MATERIAIS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARCOMINI, José Benedito et al. Fatigue crack propagation of API 5L X70 steel in a modifed simulated fuel-grade ethanol (MSFGE) environment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 45, p. 1-12, 2023Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-023-04540-z. Acesso em: 16 out. 2024.
APA
Marcomini, J. B., Santos, E. A. dos, Sordi, V. L., Giorgetti, V., Rovere, C. A. D., Baptista, C. A. R. P., & Paes, M. (2023). Fatigue crack propagation of API 5L X70 steel in a modifed simulated fuel-grade ethanol (MSFGE) environment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 1-12. doi:10.1007/s40430-023-04540-z
NLM
Marcomini JB, Santos EA dos, Sordi VL, Giorgetti V, Rovere CAD, Baptista CARP, Paes M. Fatigue crack propagation of API 5L X70 steel in a modifed simulated fuel-grade ethanol (MSFGE) environment [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-12.[citado 2024 out. 16 ] Available from: https://dx.doi.org/10.1007/s40430-023-04540-z
Vancouver
Marcomini JB, Santos EA dos, Sordi VL, Giorgetti V, Rovere CAD, Baptista CARP, Paes M. Fatigue crack propagation of API 5L X70 steel in a modifed simulated fuel-grade ethanol (MSFGE) environment [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-12.[citado 2024 out. 16 ] Available from: https://dx.doi.org/10.1007/s40430-023-04540-z
Artigo de periodico
Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling (2023)
Amaral, Ana Carolina Godoy; De Marqui Júnior, Carlos ; Silveira, Marcos
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: MOBILIDADE URBANA, PANDEMIAS, COVID-19, SISTEMAS DINÂMICOS, AEROELASTICIDADE DE AERONAVES, PIEZOELETRICIDADE, ENERGIA, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AMARAL, Ana Carolina Godoy e DE MARQUI JÚNIOR, Carlos e SILVEIRA, Marcos. Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 45, p. 1-14, 2023Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03783-6. Acesso em: 16 out. 2024.
APA
Amaral, A. C. G., De Marqui Júnior, C., & Silveira, M. (2023). Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 1-14. doi:10.1007/s40430-022-03783-6
NLM
Amaral ACG, De Marqui Júnior C, Silveira M. Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-14.[citado 2024 out. 16 ] Available from: https://doi.org/10.1007/s40430-022-03783-6
Vancouver
Amaral ACG, De Marqui Júnior C, Silveira M. Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-14.[citado 2024 out. 16 ] Available from: https://doi.org/10.1007/s40430-022-03783-6
Artigo de periodico
Control of airfow induced vibrations on a cantilever beam by actuating on the exposure of its machined surface notch pattern (2023)
Paladini, Andre Luis Aguiar; Rodrigues, Andre L. G.; Bidinotto, Jorge Henrique ; Franco, Vitor Ramos
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: VIBRAÇÕES, AEROELASTICIDADE DE AERONAVES, GEOMETRIA, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PALADINI, Andre Luis Aguiar et al. Control of airfow induced vibrations on a cantilever beam by actuating on the exposure of its machined surface notch pattern. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 45, p. 1-16, 2023Tradução . . Disponível em: https://doi.org/10.1007/s40430-023-04255-1. Acesso em: 16 out. 2024.
APA
Paladini, A. L. A., Rodrigues, A. L. G., Bidinotto, J. H., & Franco, V. R. (2023). Control of airfow induced vibrations on a cantilever beam by actuating on the exposure of its machined surface notch pattern. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 1-16. doi:10.1007/s40430-023-04255-1
NLM
Paladini ALA, Rodrigues ALG, Bidinotto JH, Franco VR. Control of airfow induced vibrations on a cantilever beam by actuating on the exposure of its machined surface notch pattern [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-16.[citado 2024 out. 16 ] Available from: https://doi.org/10.1007/s40430-023-04255-1
Vancouver
Paladini ALA, Rodrigues ALG, Bidinotto JH, Franco VR. Control of airfow induced vibrations on a cantilever beam by actuating on the exposure of its machined surface notch pattern [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-16.[citado 2024 out. 16 ] Available from: https://doi.org/10.1007/s40430-023-04255-1
Artigo de periodico
Study of surface warm shot peening on the fatigue life of a SAE 5160 leaf spring steel (2023)
Ruy, Marcos César; Bose Filho, Waldek Wladimir ; Doel, T. J. A.; Ruchert, Cassius Olívio Figueiredo Terra
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidades: EESC, EEL
Subjects: TRATAMENTO DE SUPERFÍCIES, FADIGA DOS MATERIAIS, TENSÃO RESIDUAL, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RUY, Marcos César et al. Study of surface warm shot peening on the fatigue life of a SAE 5160 leaf spring steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 45, p. 1-11, 2023Tradução . . Disponível em: https://doi.org/10.1007/s40430-023-04404-6. Acesso em: 16 out. 2024.
APA
Ruy, M. C., Bose Filho, W. W., Doel, T. J. A., & Ruchert, C. O. F. T. (2023). Study of surface warm shot peening on the fatigue life of a SAE 5160 leaf spring steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 1-11. doi:10.1007/s40430-023-04404-6
NLM
Ruy MC, Bose Filho WW, Doel TJA, Ruchert COFT. Study of surface warm shot peening on the fatigue life of a SAE 5160 leaf spring steel [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-11.[citado 2024 out. 16 ] Available from: https://doi.org/10.1007/s40430-023-04404-6
Vancouver
Ruy MC, Bose Filho WW, Doel TJA, Ruchert COFT. Study of surface warm shot peening on the fatigue life of a SAE 5160 leaf spring steel [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-11.[citado 2024 out. 16 ] Available from: https://doi.org/10.1007/s40430-023-04404-6
Artigo de periodico
Closed‑loop optimization of piezoelectric sensors locations and gains for output feedback active vibration control (2023)
Shigueoka, Augusto H.; Trindade, Marcelo Areias
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Assunto: ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SHIGUEOKA, Augusto H. e TRINDADE, Marcelo Areias. Closed‑loop optimization of piezoelectric sensors locations and gains for output feedback active vibration control. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 45, p. 1-18, 2023Tradução . . Disponível em: https://doi.org/10.1007/s40430-023-04071-7. Acesso em: 16 out. 2024.
APA
Shigueoka, A. H., & Trindade, M. A. (2023). Closed‑loop optimization of piezoelectric sensors locations and gains for output feedback active vibration control. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 1-18. doi:10.1007/s40430-023-04071-7
NLM
Shigueoka AH, Trindade MA. Closed‑loop optimization of piezoelectric sensors locations and gains for output feedback active vibration control [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-18.[citado 2024 out. 16 ] Available from: https://doi.org/10.1007/s40430-023-04071-7
Vancouver
Shigueoka AH, Trindade MA. Closed‑loop optimization of piezoelectric sensors locations and gains for output feedback active vibration control [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-18.[citado 2024 out. 16 ] Available from: https://doi.org/10.1007/s40430-023-04071-7
Artigo de periodico
Investigation of the stability of a planar Oldroyd‑B jet (2023)
Sterza, Rafael de Lima ; Mendonça, Marcio Teixeira de ; Souza, Leandro Franco de ; Brandi, Analice Costacurta
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: ICMC
Subjects: POLÍMEROS (MATERIAIS), DINÂMICA DOS FLUÍDOS COMPUTACIONAL, VISCOELASTICIDADE DAS ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
STERZA, Rafael de Lima et al. Investigation of the stability of a planar Oldroyd‑B jet. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 45, p. 1-16, 2023Tradução . . Disponível em: https://doi.org/10.1007/s40430-023-04162-5. Acesso em: 16 out. 2024.
APA
Sterza, R. de L., Mendonça, M. T. de, Souza, L. F. de, & Brandi, A. C. (2023). Investigation of the stability of a planar Oldroyd‑B jet. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 1-16. doi:10.1007/s40430-023-04162-5
NLM
Sterza R de L, Mendonça MT de, Souza LF de, Brandi AC. Investigation of the stability of a planar Oldroyd‑B jet [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-16.[citado 2024 out. 16 ] Available from: https://doi.org/10.1007/s40430-023-04162-5
Vancouver
Sterza R de L, Mendonça MT de, Souza LF de, Brandi AC. Investigation of the stability of a planar Oldroyd‑B jet [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-16.[citado 2024 out. 16 ] Available from: https://doi.org/10.1007/s40430-023-04162-5
Artigo de periodico
A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil (2022)
Maia, Cristiana Brasil; Silva, Felipe Venâncio Mitkiewicz; Cabezas Gómez, Luben
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: ENERGIA ELÉTRICA, ÁGUA, DESSALINIZAÇÃO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MAIA, Cristiana Brasil e SILVA, Felipe Venâncio Mitkiewicz e CABEZAS GÓMEZ, Luben. A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, p. 1-16, 2022Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03463-5. Acesso em: 16 out. 2024.
APA
Maia, C. B., Silva, F. V. M., & Cabezas Gómez, L. (2022). A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, 1-16. doi:10.1007/s40430-022-03463-5
NLM
Maia CB, Silva FVM, Cabezas Gómez L. A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-16.[citado 2024 out. 16 ] Available from: https://doi.org/10.1007/s40430-022-03463-5
Vancouver
Maia CB, Silva FVM, Cabezas Gómez L. A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-16.[citado 2024 out. 16 ] Available from: https://doi.org/10.1007/s40430-022-03463-5
Artigo de periodico
Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment (2022)
Leal, José Eduardo Silveira; Martiniano, Guilherme Antonelli; Bose Filho, Waldek Wladimir ; Craidy, Pedro da Silva; Paes, Marcelo Torres Piza; Ferreira, Daniel Correia Freire; Valdés Arencibia, Rosenda; Franco, Sinésio Domingues
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: HIDROGÊNIO, NANOCOMPOSITOS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LEAL, José Eduardo Silveira et al. Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, p. 1-13, 2022Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03783-6. Acesso em: 16 out. 2024.
APA
Leal, J. E. S., Martiniano, G. A., Bose Filho, W. W., Craidy, P. da S., Paes, M. T. P., Ferreira, D. C. F., et al. (2022). Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, 1-13. doi:10.1007/s40430-022-03783-6
NLM
Leal JES, Martiniano GA, Bose Filho WW, Craidy P da S, Paes MTP, Ferreira DCF, Valdés Arencibia R, Franco SD. Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-13.[citado 2024 out. 16 ] Available from: https://doi.org/10.1007/s40430-022-03783-6
Vancouver
Leal JES, Martiniano GA, Bose Filho WW, Craidy P da S, Paes MTP, Ferreira DCF, Valdés Arencibia R, Franco SD. Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-13.[citado 2024 out. 16 ] Available from: https://doi.org/10.1007/s40430-022-03783-6
Artigo de periodico
Feasibility and performance analyses for an active geometry control suspension system for over-actuated vehicle (2022)
Malvezzi, Fernando ; Coelho, Tarcisio Antonio Hess ; Orsino, Renato Maia Matarazzo
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EP
Subjects: DINÂMICA VEICULAR, MECANISMOS, CHASSIS, SUSPENSÃO MECÂNICA, SISTEMAS VEICULARES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MALVEZZI, Fernando e COELHO, Tarcisio Antonio Hess e ORSINO, Renato Maia Matarazzo. Feasibility and performance analyses for an active geometry control suspension system for over-actuated vehicle. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, p. 1-12, 2022Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03448-4. Acesso em: 16 out. 2024.
APA
Malvezzi, F., Coelho, T. A. H., & Orsino, R. M. M. (2022). Feasibility and performance analyses for an active geometry control suspension system for over-actuated vehicle. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, 1-12. doi:10.1007/s40430-022-03448-4
NLM
Malvezzi F, Coelho TAH, Orsino RMM. Feasibility and performance analyses for an active geometry control suspension system for over-actuated vehicle [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-12.[citado 2024 out. 16 ] Available from: https://doi.org/10.1007/s40430-022-03448-4
Vancouver
Malvezzi F, Coelho TAH, Orsino RMM. Feasibility and performance analyses for an active geometry control suspension system for over-actuated vehicle [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-12.[citado 2024 out. 16 ] Available from: https://doi.org/10.1007/s40430-022-03448-4
Artigo de periodico
Complete geometric representation of yield surfaces for porous ductile media by a 3D computational homogenization approach: an assessment of the Gurson yield criterion (2022)
Santos, Wanderson Ferreira dos; Ferreira, Ayrton Ribeiro; Proença, Sérgio Persival Baroncini
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: MATERIAIS POROSOS, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Wanderson Ferreira dos e FERREIRA, Ayrton Ribeiro e PROENÇA, Sérgio Persival Baroncini. Complete geometric representation of yield surfaces for porous ductile media by a 3D computational homogenization approach: an assessment of the Gurson yield criterion. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, p. 1-17, 2022Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-022-03483-1. Acesso em: 16 out. 2024.
APA
Santos, W. F. dos, Ferreira, A. R., & Proença, S. P. B. (2022). Complete geometric representation of yield surfaces for porous ductile media by a 3D computational homogenization approach: an assessment of the Gurson yield criterion. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, 1-17. doi:10.1007/s40430-022-03483-1
NLM
Santos WF dos, Ferreira AR, Proença SPB. Complete geometric representation of yield surfaces for porous ductile media by a 3D computational homogenization approach: an assessment of the Gurson yield criterion [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-17.[citado 2024 out. 16 ] Available from: https://dx.doi.org/10.1007/s40430-022-03483-1
Vancouver
Santos WF dos, Ferreira AR, Proença SPB. Complete geometric representation of yield surfaces for porous ductile media by a 3D computational homogenization approach: an assessment of the Gurson yield criterion [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-17.[citado 2024 out. 16 ] Available from: https://dx.doi.org/10.1007/s40430-022-03483-1
Artigo de periodico
Toward the use of bond graphs for manufacturing control: improving existing models (2022)
Maluf, Arthur Sarro; Sagawa, Juliana Keiko; Tavares Neto, Roberto Fernandes; Silva, Maíra Martins da
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: CONTROLE DA PRODUÇÃO, INDÚSTRIA 4.0, SISTEMAS DINÂMICOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MALUF, Arthur Sarro et al. Toward the use of bond graphs for manufacturing control: improving existing models. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, p. 1-17, 2022Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03827-x. Acesso em: 16 out. 2024.
APA
Maluf, A. S., Sagawa, J. K., Tavares Neto, R. F., & Silva, M. M. da. (2022). Toward the use of bond graphs for manufacturing control: improving existing models. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, 1-17. doi:10.1007/s40430-022-03827-x
NLM
Maluf AS, Sagawa JK, Tavares Neto RF, Silva MM da. Toward the use of bond graphs for manufacturing control: improving existing models [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-17.[citado 2024 out. 16 ] Available from: https://doi.org/10.1007/s40430-022-03827-x
Vancouver
Maluf AS, Sagawa JK, Tavares Neto RF, Silva MM da. Toward the use of bond graphs for manufacturing control: improving existing models [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-17.[citado 2024 out. 16 ] Available from: https://doi.org/10.1007/s40430-022-03827-x
Artigo de periodico
Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system (2022)
Santos, Fernando Neves Quintino dos; Colmanetti, Alex Roger Almeida; Cabezas Gómez, Luben ; Tibiriçá, Cristiano Bigonha
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: REFRIGERAÇÃO, AQUECIMENTO, GERAÇÃO DE ENERGIA ELÉTRICA, TERMOELETRICIDADE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Fernando Neves Quintino dos et al. Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, p. 1-11, 2022Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03791-6. Acesso em: 16 out. 2024.
APA
Santos, F. N. Q. dos, Colmanetti, A. R. A., Cabezas Gómez, L., & Tibiriçá, C. B. (2022). Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, 1-11. doi:10.1007/s40430-022-03791-6
NLM
Santos FNQ dos, Colmanetti ARA, Cabezas Gómez L, Tibiriçá CB. Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-11.[citado 2024 out. 16 ] Available from: https://doi.org/10.1007/s40430-022-03791-6
Vancouver
Santos FNQ dos, Colmanetti ARA, Cabezas Gómez L, Tibiriçá CB. Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-11.[citado 2024 out. 16 ] Available from: https://doi.org/10.1007/s40430-022-03791-6

USP Schools

ReP

Filtros

USP Schools

Departament

Authors

USP affiliated authors

Date published

Subjects

Funding Agencies

Indexado em

Normalized affiliation

Non normalized affiliation

Countries of institutions of collaboration