ReP USP - Resultado da busca

Artigo de periodico
Advanced thermal imaging processing and deep learning integration for enhanced defect detection in carbon fiber-reinforced polymer laminates (2025)
Rosa, Renan Garcia; Barella, Bruno Pereira; Vargas, Iago Garcia; Tarpani, José Ricardo ; Herrmann, Hans-Georg; Fernandes, Henrique
Fonte: Materials. Unidade: EESC
Assuntos: APRENDIZAGEM PROFUNDA, TERMOGRAFIA, POLÍMEROS (MATERIAIS), ENSAIOS NÃO DESTRUTIVOS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ROSA, Renan Garcia et al. Advanced thermal imaging processing and deep learning integration for enhanced defect detection in carbon fiber-reinforced polymer laminates. Materials, v. 18, n. 7, p. 1-18, 2025Tradução . . Disponível em: https://dx.doi.org/10.3390/ma18071448. Acesso em: 24 nov. 2025.
APA
Rosa, R. G., Barella, B. P., Vargas, I. G., Tarpani, J. R., Herrmann, H. -G., & Fernandes, H. (2025). Advanced thermal imaging processing and deep learning integration for enhanced defect detection in carbon fiber-reinforced polymer laminates. Materials, 18( 7), 1-18. doi:10.3390/ma18071448
NLM
Rosa RG, Barella BP, Vargas IG, Tarpani JR, Herrmann H-G, Fernandes H. Advanced thermal imaging processing and deep learning integration for enhanced defect detection in carbon fiber-reinforced polymer laminates [Internet]. Materials. 2025 ; 18( 7): 1-18.[citado 2025 nov. 24 ] Available from: https://dx.doi.org/10.3390/ma18071448
Vancouver
Rosa RG, Barella BP, Vargas IG, Tarpani JR, Herrmann H-G, Fernandes H. Advanced thermal imaging processing and deep learning integration for enhanced defect detection in carbon fiber-reinforced polymer laminates [Internet]. Materials. 2025 ; 18( 7): 1-18.[citado 2025 nov. 24 ] Available from: https://dx.doi.org/10.3390/ma18071448
Artigo de periodico
Microstructure evolution of porous calcium hexaluminate compacts during first heating (2024)
Sakihama, Jose
Fonte: Ceramics International. Unidade: EESC
Assuntos: CERÂMICA, ISOLAMENTO TÉRMICO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SAKIHAMA, Jose. Microstructure evolution of porous calcium hexaluminate compacts during first heating. Ceramics International, v. 50, n. 3, p. 4875-4884, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.ceramint.2023.11.230. Acesso em: 24 nov. 2025.
APA
Sakihama, J. (2024). Microstructure evolution of porous calcium hexaluminate compacts during first heating. Ceramics International, 50( 3), 4875-4884. doi:10.1016/j.ceramint.2023.11.230
NLM
Sakihama J. Microstructure evolution of porous calcium hexaluminate compacts during first heating [Internet]. Ceramics International. 2024 ; 50( 3): 4875-4884.[citado 2025 nov. 24 ] Available from: http://dx.doi.org/10.1016/j.ceramint.2023.11.230
Vancouver
Sakihama J. Microstructure evolution of porous calcium hexaluminate compacts during first heating [Internet]. Ceramics International. 2024 ; 50( 3): 4875-4884.[citado 2025 nov. 24 ] Available from: http://dx.doi.org/10.1016/j.ceramint.2023.11.230
Artigo de periodico
Hydroxylation studies on high-solid load magnesia aqueous suspensions (2023)
Salomão, Rafael ; Fernandes, Leandro
Fonte: Materials Research. Unidade: EESC
Assuntos: HIDROXILASE, MAGNÉSIO, SINTERIZAÇÃO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SALOMÃO, Rafael e FERNANDES, Leandro. Hydroxylation studies on high-solid load magnesia aqueous suspensions. Materials Research, v. 26, p. 1-10, 2023Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2022-0329. Acesso em: 24 nov. 2025.
APA
Salomão, R., & Fernandes, L. (2023). Hydroxylation studies on high-solid load magnesia aqueous suspensions. Materials Research, 26, 1-10. doi:10.1590/1980-5373-MR-2022-0329
NLM
Salomão R, Fernandes L. Hydroxylation studies on high-solid load magnesia aqueous suspensions [Internet]. Materials Research. 2023 ; 26 1-10.[citado 2025 nov. 24 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0329
Vancouver
Salomão R, Fernandes L. Hydroxylation studies on high-solid load magnesia aqueous suspensions [Internet]. Materials Research. 2023 ; 26 1-10.[citado 2025 nov. 24 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0329
Artigo de periodico
In-situ production of metal matrix composites layers by TIG surface alloying to improve wear resistance of ductile cast iron using a buffer-layer and post weld heat treatment (2023)
Triani, Rafael Magalhães; Rodrigues Neto, José Benedito Tosoni Decarlis; Oliveira, Pedro Gabriel Bonella de; Rêgo, Galtiere Corrêa ; Lombardi Neto, Amadeu ; Casteletti, Luiz Carlos
Fonte: Coatings. Unidade: EESC
Assuntos: DESGASTE DOS MATERIAIS, FERRO FUNDIDO, MATERIAIS COMPÓSITOS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TRIANI, Rafael Magalhães et al. In-situ production of metal matrix composites layers by TIG surface alloying to improve wear resistance of ductile cast iron using a buffer-layer and post weld heat treatment. Coatings, v. 13, n. 7, p. 1-24, 2023Tradução . . Disponível em: https://doi.org/10.3390/coatings13071137. Acesso em: 24 nov. 2025.
APA
Triani, R. M., Rodrigues Neto, J. B. T. D., Oliveira, P. G. B. de, Rêgo, G. C., Lombardi Neto, A., & Casteletti, L. C. (2023). In-situ production of metal matrix composites layers by TIG surface alloying to improve wear resistance of ductile cast iron using a buffer-layer and post weld heat treatment. Coatings, 13( 7), 1-24. doi:10.3390/coatings13071137
NLM
Triani RM, Rodrigues Neto JBTD, Oliveira PGB de, Rêgo GC, Lombardi Neto A, Casteletti LC. In-situ production of metal matrix composites layers by TIG surface alloying to improve wear resistance of ductile cast iron using a buffer-layer and post weld heat treatment [Internet]. Coatings. 2023 ; 13( 7): 1-24.[citado 2025 nov. 24 ] Available from: https://doi.org/10.3390/coatings13071137
Vancouver
Triani RM, Rodrigues Neto JBTD, Oliveira PGB de, Rêgo GC, Lombardi Neto A, Casteletti LC. In-situ production of metal matrix composites layers by TIG surface alloying to improve wear resistance of ductile cast iron using a buffer-layer and post weld heat treatment [Internet]. Coatings. 2023 ; 13( 7): 1-24.[citado 2025 nov. 24 ] Available from: https://doi.org/10.3390/coatings13071137
Artigo de periodico
Hybrid magnetron sputtering of ceramic superlattices for application in a next generation of combustion engines (2022)
Castilho, Bruno Cesar Noronha Marques de; Rodrigues, Alisson Mendes ; Avila, Pedro Renato Tavares; Apolinário, Raíra Chefer; Nossa, Tamires de Souza; Walczak, Magdalena; Fernandes, Julielle Veras; Menezes, Romualdo Rodrigues; Neves, Gelmires de Araújo ; Pinto, Haroldo Cavalcanti
Fonte: Scientific Reports. Unidade: EESC
Assuntos: MOTORES DE COMBUSTÃO INTERNA, CERÂMICA, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CASTILHO, Bruno Cesar Noronha Marques de et al. Hybrid magnetron sputtering of ceramic superlattices for application in a next generation of combustion engines. Scientific Reports, v. 12, p. 1-17, 2022Tradução . . Disponível em: https://doi.org/10.1038/s41598-022-06131-9. Acesso em: 24 nov. 2025.
APA
Castilho, B. C. N. M. de, Rodrigues, A. M., Avila, P. R. T., Apolinário, R. C., Nossa, T. de S., Walczak, M., et al. (2022). Hybrid magnetron sputtering of ceramic superlattices for application in a next generation of combustion engines. Scientific Reports, 12, 1-17. doi:10.1038/s41598-022-06131-9
NLM
Castilho BCNM de, Rodrigues AM, Avila PRT, Apolinário RC, Nossa T de S, Walczak M, Fernandes JV, Menezes RR, Neves G de A, Pinto HC. Hybrid magnetron sputtering of ceramic superlattices for application in a next generation of combustion engines [Internet]. Scientific Reports. 2022 ; 12 1-17.[citado 2025 nov. 24 ] Available from: https://doi.org/10.1038/s41598-022-06131-9
Vancouver
Castilho BCNM de, Rodrigues AM, Avila PRT, Apolinário RC, Nossa T de S, Walczak M, Fernandes JV, Menezes RR, Neves G de A, Pinto HC. Hybrid magnetron sputtering of ceramic superlattices for application in a next generation of combustion engines [Internet]. Scientific Reports. 2022 ; 12 1-17.[citado 2025 nov. 24 ] Available from: https://doi.org/10.1038/s41598-022-06131-9
Artigo de periodico
Facial expressions of horses using weighted multivariate statistics for assessment of subtle local pain induced by polylactide-based polymers implanted subcutaneously (2022)
Carvalho, Julia R. G; Trindade, Pedro H. E.; Conde, Gabriel; Antonioli, Marina L.; Funnicelli, Michelli I. G.; Dias, Paula do Patrocínio; Canola, Paulo A.; Chinelatto, Marcelo Aparecido ; Ferraz, Guilherme C.
Fonte: Animals. Unidade: EESC
Assuntos: POLÍMEROS (MATERIAIS), BEM-ESTAR DO ANIMAL, EQUINOS, COMPORTAMENTO ANIMAL, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CARVALHO, Julia R. G et al. Facial expressions of horses using weighted multivariate statistics for assessment of subtle local pain induced by polylactide-based polymers implanted subcutaneously. Animals, v. 12, p. 1-20, 2022Tradução . . Disponível em: https://doi.org/10.3390/ani12182400. Acesso em: 24 nov. 2025.
APA
Carvalho, J. R. G., Trindade, P. H. E., Conde, G., Antonioli, M. L., Funnicelli, M. I. G., Dias, P. do P., et al. (2022). Facial expressions of horses using weighted multivariate statistics for assessment of subtle local pain induced by polylactide-based polymers implanted subcutaneously. Animals, 12, 1-20. doi:10.3390/ani12182400
NLM
Carvalho JRG, Trindade PHE, Conde G, Antonioli ML, Funnicelli MIG, Dias P do P, Canola PA, Chinelatto MA, Ferraz GC. Facial expressions of horses using weighted multivariate statistics for assessment of subtle local pain induced by polylactide-based polymers implanted subcutaneously [Internet]. Animals. 2022 ; 12 1-20.[citado 2025 nov. 24 ] Available from: https://doi.org/10.3390/ani12182400
Vancouver
Carvalho JRG, Trindade PHE, Conde G, Antonioli ML, Funnicelli MIG, Dias P do P, Canola PA, Chinelatto MA, Ferraz GC. Facial expressions of horses using weighted multivariate statistics for assessment of subtle local pain induced by polylactide-based polymers implanted subcutaneously [Internet]. Animals. 2022 ; 12 1-20.[citado 2025 nov. 24 ] Available from: https://doi.org/10.3390/ani12182400
Artigo de periodico
Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment (2022)
Leal, José Eduardo Silveira; Martiniano, Guilherme Antonelli; Bose Filho, Waldek Wladimir ; Craidy, Pedro da Silva; Paes, Marcelo Torres Piza; Ferreira, Daniel Correia Freire ; Valdés Arencibia, Rosenda; Franco, Sinésio Domingues
Fonte: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Assuntos: HIDROGÊNIO, NANOCOMPOSITOS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LEAL, José Eduardo Silveira et al. Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, p. 1-13, 2022Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03783-6. Acesso em: 24 nov. 2025.
APA
Leal, J. E. S., Martiniano, G. A., Bose Filho, W. W., Craidy, P. da S., Paes, M. T. P., Ferreira, D. C. F., et al. (2022). Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, 1-13. doi:10.1007/s40430-022-03783-6
NLM
Leal JES, Martiniano GA, Bose Filho WW, Craidy P da S, Paes MTP, Ferreira DCF, Valdés Arencibia R, Franco SD. Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-13.[citado 2025 nov. 24 ] Available from: https://doi.org/10.1007/s40430-022-03783-6
Vancouver
Leal JES, Martiniano GA, Bose Filho WW, Craidy P da S, Paes MTP, Ferreira DCF, Valdés Arencibia R, Franco SD. Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-13.[citado 2025 nov. 24 ] Available from: https://doi.org/10.1007/s40430-022-03783-6
Artigo de periodico
Synthesis and characterization of nanofibrilated cellulose films modified with blocked isocyanates in aqueous media and their barrier properties to water vapor and oxygen (2022)
Souza, Gustavo de; Belgacem, Mohamed Naceur ; Gandini, Alessandro; Carvalho, Antonio Jose Felix
Fonte: Carbohydrate Polymer Technologies and Applications. Unidade: EESC
Assuntos: POLÍMEROS (MATERIAIS), BIOMASSA, EMBALAGENS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUZA, Gustavo de et al. Synthesis and characterization of nanofibrilated cellulose films modified with blocked isocyanates in aqueous media and their barrier properties to water vapor and oxygen. Carbohydrate Polymer Technologies and Applications, v. 4, p. 1-10, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.carpta.2022.100249. Acesso em: 24 nov. 2025.
APA
Souza, G. de, Belgacem, M. N., Gandini, A., & Carvalho, A. J. F. (2022). Synthesis and characterization of nanofibrilated cellulose films modified with blocked isocyanates in aqueous media and their barrier properties to water vapor and oxygen. Carbohydrate Polymer Technologies and Applications, 4, 1-10. doi:10.1016/j.carpta.2022.100249
NLM
Souza G de, Belgacem MN, Gandini A, Carvalho AJF. Synthesis and characterization of nanofibrilated cellulose films modified with blocked isocyanates in aqueous media and their barrier properties to water vapor and oxygen [Internet]. Carbohydrate Polymer Technologies and Applications. 2022 ; 4 1-10.[citado 2025 nov. 24 ] Available from: https://doi.org/10.1016/j.carpta.2022.100249
Vancouver
Souza G de, Belgacem MN, Gandini A, Carvalho AJF. Synthesis and characterization of nanofibrilated cellulose films modified with blocked isocyanates in aqueous media and their barrier properties to water vapor and oxygen [Internet]. Carbohydrate Polymer Technologies and Applications. 2022 ; 4 1-10.[citado 2025 nov. 24 ] Available from: https://doi.org/10.1016/j.carpta.2022.100249
Artigo de periodico
Spraycoating of nanocellulose fibrilated (CNF) onto glass fiber and carbon fiber fabrics and its role as hierarchical reinforcement on GFRP and CFRP composites (2022)
Souza, Gustavo de ; Tarpani, José Ricardo
Fonte: Composite Interfaces. Unidade: EESC
Assuntos: MATERIAIS COMPÓSITOS DE FIBRAS, POLÍMEROS (MATERIAIS), MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUZA, Gustavo de e TARPANI, José Ricardo. Spraycoating of nanocellulose fibrilated (CNF) onto glass fiber and carbon fiber fabrics and its role as hierarchical reinforcement on GFRP and CFRP composites. Composite Interfaces, v. 29, n. 2, p. 121-140, 2022Tradução . . Disponível em: https://doi.org/10.1080/09276440.2021.1910420. Acesso em: 24 nov. 2025.
APA
Souza, G. de, & Tarpani, J. R. (2022). Spraycoating of nanocellulose fibrilated (CNF) onto glass fiber and carbon fiber fabrics and its role as hierarchical reinforcement on GFRP and CFRP composites. Composite Interfaces, 29( 2), 121-140. doi:10.1080/09276440.2021.1910420
NLM
Souza G de, Tarpani JR. Spraycoating of nanocellulose fibrilated (CNF) onto glass fiber and carbon fiber fabrics and its role as hierarchical reinforcement on GFRP and CFRP composites [Internet]. Composite Interfaces. 2022 ; 29( 2): 121-140.[citado 2025 nov. 24 ] Available from: https://doi.org/10.1080/09276440.2021.1910420
Vancouver
Souza G de, Tarpani JR. Spraycoating of nanocellulose fibrilated (CNF) onto glass fiber and carbon fiber fabrics and its role as hierarchical reinforcement on GFRP and CFRP composites [Internet]. Composite Interfaces. 2022 ; 29( 2): 121-140.[citado 2025 nov. 24 ] Available from: https://doi.org/10.1080/09276440.2021.1910420
Artigo de periodico
Fatigue crack propagation of aeronautic AA7050-T7451 and AA2050-T84 aluminum alloys in air and saline environments (2022)
Cavalcante, Thiago Roberto Felisardo; Pereira, Gualter Silva; Koga, Guilherme Yuuki; Bolfarini, Claudemiro; Bose Filho, Waldek Wladimir ; Ávila Diaz, Julián Arnaldo
Fonte: International Journal of Fatigue. Unidade: EESC
Assuntos: LIGAS METÁLICAS, FADIGA DOS MATERIAIS, CORROSÃO DOS MATERIAIS, AERONÁUTICA, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAVALCANTE, Thiago Roberto Felisardo et al. Fatigue crack propagation of aeronautic AA7050-T7451 and AA2050-T84 aluminum alloys in air and saline environments. International Journal of Fatigue, v. 154, p. 1-13, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.ijfatigue.2021.106519. Acesso em: 24 nov. 2025.
APA
Cavalcante, T. R. F., Pereira, G. S., Koga, G. Y., Bolfarini, C., Bose Filho, W. W., & Ávila Diaz, J. A. (2022). Fatigue crack propagation of aeronautic AA7050-T7451 and AA2050-T84 aluminum alloys in air and saline environments. International Journal of Fatigue, 154, 1-13. doi:10.1016/j.ijfatigue.2021.106519
NLM
Cavalcante TRF, Pereira GS, Koga GY, Bolfarini C, Bose Filho WW, Ávila Diaz JA. Fatigue crack propagation of aeronautic AA7050-T7451 and AA2050-T84 aluminum alloys in air and saline environments [Internet]. International Journal of Fatigue. 2022 ; 154 1-13.[citado 2025 nov. 24 ] Available from: https://doi.org/10.1016/j.ijfatigue.2021.106519
Vancouver
Cavalcante TRF, Pereira GS, Koga GY, Bolfarini C, Bose Filho WW, Ávila Diaz JA. Fatigue crack propagation of aeronautic AA7050-T7451 and AA2050-T84 aluminum alloys in air and saline environments [Internet]. International Journal of Fatigue. 2022 ; 154 1-13.[citado 2025 nov. 24 ] Available from: https://doi.org/10.1016/j.ijfatigue.2021.106519
Artigo de periodico
Stress corrosion cracking and corrosion fatigue analysis of API X70 steel exposed to a circulating ethanol environment (2022)
Santos, Elielson Alves dos; Giorgetti, Vinicius; Souza Junior, Celso A. de; Marcomini, José Benedito ; Sordi, Vitor Luiz; Rovere, Carlos Alberto Della
Fonte: International Journal of Pressure Vessels and Piping. Unidade: EESC
Assuntos: FADIGA DOS MATERIAIS, CORROSÃO DOS MATERIAIS, ETANOL, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Elielson Alves dos et al. Stress corrosion cracking and corrosion fatigue analysis of API X70 steel exposed to a circulating ethanol environment. International Journal of Pressure Vessels and Piping, v. 200, p. 1-12, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.ijpvp.2022.104846. Acesso em: 24 nov. 2025.
APA
Santos, E. A. dos, Giorgetti, V., Souza Junior, C. A. de, Marcomini, J. B., Sordi, V. L., & Rovere, C. A. D. (2022). Stress corrosion cracking and corrosion fatigue analysis of API X70 steel exposed to a circulating ethanol environment. International Journal of Pressure Vessels and Piping, 200, 1-12. doi:10.1016/j.ijpvp.2022.104846
NLM
Santos EA dos, Giorgetti V, Souza Junior CA de, Marcomini JB, Sordi VL, Rovere CAD. Stress corrosion cracking and corrosion fatigue analysis of API X70 steel exposed to a circulating ethanol environment [Internet]. International Journal of Pressure Vessels and Piping. 2022 ; 200 1-12.[citado 2025 nov. 24 ] Available from: https://doi.org/10.1016/j.ijpvp.2022.104846
Vancouver
Santos EA dos, Giorgetti V, Souza Junior CA de, Marcomini JB, Sordi VL, Rovere CAD. Stress corrosion cracking and corrosion fatigue analysis of API X70 steel exposed to a circulating ethanol environment [Internet]. International Journal of Pressure Vessels and Piping. 2022 ; 200 1-12.[citado 2025 nov. 24 ] Available from: https://doi.org/10.1016/j.ijpvp.2022.104846
Artigo de periodico
Effect of rapid solidification processing on the microstructure and corrosion of 316L austenitic stainless steel (2022)
Apolinário, Raíra Chefer ; Daianezi, Isabela; Borges, Spyridion Haritos; Sousa, Lucíola Lucena de; Pinto, Haroldo Cavalcanti ; Mariano, Neide Aparecida
Fonte: Materials Research. Unidade: EESC
Assuntos: AÇO INOXIDÁVEL, SOLIDIFICAÇÃO, LAMINADOS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
APOLINÁRIO, Raíra Chefer et al. Effect of rapid solidification processing on the microstructure and corrosion of 316L austenitic stainless steel. Materials Research, v. 25, p. 1-10, 2022Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2022-0235. Acesso em: 24 nov. 2025.
APA
Apolinário, R. C., Daianezi, I., Borges, S. H., Sousa, L. L. de, Pinto, H. C., & Mariano, N. A. (2022). Effect of rapid solidification processing on the microstructure and corrosion of 316L austenitic stainless steel. Materials Research, 25, 1-10. doi:10.1590/1980-5373-MR-2022-0235
NLM
Apolinário RC, Daianezi I, Borges SH, Sousa LL de, Pinto HC, Mariano NA. Effect of rapid solidification processing on the microstructure and corrosion of 316L austenitic stainless steel [Internet]. Materials Research. 2022 ; 25 1-10.[citado 2025 nov. 24 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0235
Vancouver
Apolinário RC, Daianezi I, Borges SH, Sousa LL de, Pinto HC, Mariano NA. Effect of rapid solidification processing on the microstructure and corrosion of 316L austenitic stainless steel [Internet]. Materials Research. 2022 ; 25 1-10.[citado 2025 nov. 24 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0235
Artigo de periodico
Xylan-starch-based bioplastic formulation and xylan infuence on the physicochemical and biodegradability properties (2022)
Macedo, João Victor Carpinelli; Abe, Mateus Manabu; Sanvezzo, Paula Bertolino; Grillo, Renato; Branciforti, Márcia Cristina ; Brienzo, Michel
Fonte: Polymer Bulletin. Unidade: EESC
Assuntos: PLÁSTICOS BIODEGRADÁVEIS, BIOMASSA, BIOMATERIAIS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MACEDO, João Victor Carpinelli et al. Xylan-starch-based bioplastic formulation and xylan infuence on the physicochemical and biodegradability properties. Polymer Bulletin, p. [1-26], 2022Tradução . . Disponível em: https://doi.org/10.1007/s00289-022-04385-x. Acesso em: 24 nov. 2025.
APA
Macedo, J. V. C., Abe, M. M., Sanvezzo, P. B., Grillo, R., Branciforti, M. C., & Brienzo, M. (2022). Xylan-starch-based bioplastic formulation and xylan infuence on the physicochemical and biodegradability properties. Polymer Bulletin, [1-26]. doi:10.1007/s00289-022-04385-x
NLM
Macedo JVC, Abe MM, Sanvezzo PB, Grillo R, Branciforti MC, Brienzo M. Xylan-starch-based bioplastic formulation and xylan infuence on the physicochemical and biodegradability properties [Internet]. Polymer Bulletin. 2022 ; [1-26].[citado 2025 nov. 24 ] Available from: https://doi.org/10.1007/s00289-022-04385-x
Vancouver
Macedo JVC, Abe MM, Sanvezzo PB, Grillo R, Branciforti MC, Brienzo M. Xylan-starch-based bioplastic formulation and xylan infuence on the physicochemical and biodegradability properties [Internet]. Polymer Bulletin. 2022 ; [1-26].[citado 2025 nov. 24 ] Available from: https://doi.org/10.1007/s00289-022-04385-x
Artigo de periodico
Oven-drying microfibrillated cellulose covered with a low molecular weight copolymer for dispersion in a polymer matrix (2022)
Dias, Paula do Patrocínio; Chinelatto, Marcelo Aparecido
Fonte: Macromolecular Symposia. Unidade: EESC
Assuntos: MATERIAIS, POLÍMEROS (MATERIAIS), CELULOSE, NANOCOMPOSITOS, SECAGEM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DIAS, Paula do Patrocínio e CHINELATTO, Marcelo Aparecido. Oven-drying microfibrillated cellulose covered with a low molecular weight copolymer for dispersion in a polymer matrix. Macromolecular Symposia, v. 406, n. 1, p. 1-9, 2022Tradução . . Disponível em: https://doi.org/10.1002/masy.202200038. Acesso em: 24 nov. 2025.
APA
Dias, P. do P., & Chinelatto, M. A. (2022). Oven-drying microfibrillated cellulose covered with a low molecular weight copolymer for dispersion in a polymer matrix. Macromolecular Symposia, 406( 1), 1-9. doi:10.1002/masy.202200038
NLM
Dias P do P, Chinelatto MA. Oven-drying microfibrillated cellulose covered with a low molecular weight copolymer for dispersion in a polymer matrix [Internet]. Macromolecular Symposia. 2022 ; 406( 1): 1-9.[citado 2025 nov. 24 ] Available from: https://doi.org/10.1002/masy.202200038
Vancouver
Dias P do P, Chinelatto MA. Oven-drying microfibrillated cellulose covered with a low molecular weight copolymer for dispersion in a polymer matrix [Internet]. Macromolecular Symposia. 2022 ; 406( 1): 1-9.[citado 2025 nov. 24 ] Available from: https://doi.org/10.1002/masy.202200038
Artigo de periodico
Flexible composite films made of EMAA−Na+ ionomer: evaluation of the influence of piezoelectric particles on the thermal and mechanical properties (2022)
Tita, Sandra Patrícia da Silva; Magalhães, Fernão Domingos; Paiva, Diana; Bertochi, Maria Aparecida Zaghete; Teixeira, Guilhermina Ferreira; Pires, Ana L.; Pereira, André M.; Tarpani, José Ricardo
Fonte: Polymers. Unidade: EESC
Assuntos: FILMES FINOS, SENSOR, MATERIAIS COMPÓSITOS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TITA, Sandra Patrícia da Silva et al. Flexible composite films made of EMAA−Na+ ionomer: evaluation of the influence of piezoelectric particles on the thermal and mechanical properties. Polymers, v. 14, n. 13, p. 1-23, 2022Tradução . . Disponível em: https://doi.org/10.3390/polym14132755. Acesso em: 24 nov. 2025.
APA
Tita, S. P. da S., Magalhães, F. D., Paiva, D., Bertochi, M. A. Z., Teixeira, G. F., Pires, A. L., et al. (2022). Flexible composite films made of EMAA−Na+ ionomer: evaluation of the influence of piezoelectric particles on the thermal and mechanical properties. Polymers, 14( 13), 1-23. doi:10.3390/polym14132755
NLM
Tita SP da S, Magalhães FD, Paiva D, Bertochi MAZ, Teixeira GF, Pires AL, Pereira AM, Tarpani JR. Flexible composite films made of EMAA−Na+ ionomer: evaluation of the influence of piezoelectric particles on the thermal and mechanical properties [Internet]. Polymers. 2022 ; 14( 13): 1-23.[citado 2025 nov. 24 ] Available from: https://doi.org/10.3390/polym14132755
Vancouver
Tita SP da S, Magalhães FD, Paiva D, Bertochi MAZ, Teixeira GF, Pires AL, Pereira AM, Tarpani JR. Flexible composite films made of EMAA−Na+ ionomer: evaluation of the influence of piezoelectric particles on the thermal and mechanical properties [Internet]. Polymers. 2022 ; 14( 13): 1-23.[citado 2025 nov. 24 ] Available from: https://doi.org/10.3390/polym14132755
Artigo de periodico
Fabrication, morphological, mechanical and biological performance of 3D printed poly(ε-caprolactone)/bioglass composite scaffolds for bone tissue engineering applications (2022)
Barbosa, Talita Villa; Dernowsek, Janaína A; Tobar, Raúl Julián Revelo; Casali, Bruna Carla; Fortulan, Carlos Alberto ; Ferreira, Eduardo Bellini ; Araújo, Heloísa Sobreiro Selistre de; Branciforti, Márcia Cristina
Fonte: Biomedical Materials. Unidade: EESC
Assuntos: BIOMATERIAIS, VIDRO, ENGENHARIA TECIDUAL, IMPRESSORA, TERCEIRA DIMENSÃO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BARBOSA, Talita Villa et al. Fabrication, morphological, mechanical and biological performance of 3D printed poly(ε-caprolactone)/bioglass composite scaffolds for bone tissue engineering applications. Biomedical Materials, v. 17, n. 5, 2022Tradução . . Disponível em: https://doi.org/10.1088/1748-605X/ac88ad. Acesso em: 24 nov. 2025.
APA
Barbosa, T. V., Dernowsek, J. A., Tobar, R. J. R., Casali, B. C., Fortulan, C. A., Ferreira, E. B., et al. (2022). Fabrication, morphological, mechanical and biological performance of 3D printed poly(ε-caprolactone)/bioglass composite scaffolds for bone tissue engineering applications. Biomedical Materials, 17( 5). doi:10.1088/1748-605X/ac88ad
NLM
Barbosa TV, Dernowsek JA, Tobar RJR, Casali BC, Fortulan CA, Ferreira EB, Araújo HSS de, Branciforti MC. Fabrication, morphological, mechanical and biological performance of 3D printed poly(ε-caprolactone)/bioglass composite scaffolds for bone tissue engineering applications [Internet]. Biomedical Materials. 2022 ; 17( 5):[citado 2025 nov. 24 ] Available from: https://doi.org/10.1088/1748-605X/ac88ad
Vancouver
Barbosa TV, Dernowsek JA, Tobar RJR, Casali BC, Fortulan CA, Ferreira EB, Araújo HSS de, Branciforti MC. Fabrication, morphological, mechanical and biological performance of 3D printed poly(ε-caprolactone)/bioglass composite scaffolds for bone tissue engineering applications [Internet]. Biomedical Materials. 2022 ; 17( 5):[citado 2025 nov. 24 ] Available from: https://doi.org/10.1088/1748-605X/ac88ad
Artigo de periodico
Short-beam shear fatigue behavior of round curved pultruded composite (2022)
Tonatto, Maikson Luiz Passaia ; Tarpani, José Ricardo ; Amico, Sandro Campos
Fonte: Mechanics of Advanced Materials and Structures. Unidade: EESC
Assuntos: MATERIAIS COMPÓSITOS, FADIGA DOS MATERIAIS, CISALHAMENTO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TONATTO, Maikson Luiz Passaia e TARPANI, José Ricardo e AMICO, Sandro Campos. Short-beam shear fatigue behavior of round curved pultruded composite. Mechanics of Advanced Materials and Structures, v. 29, n. 26, p. 5579-5587, 2022Tradução . . Disponível em: https://doi.org/10.1080/15376494.2021.1959968. Acesso em: 24 nov. 2025.
APA
Tonatto, M. L. P., Tarpani, J. R., & Amico, S. C. (2022). Short-beam shear fatigue behavior of round curved pultruded composite. Mechanics of Advanced Materials and Structures, 29( 26), 5579-5587. doi:10.1080/15376494.2021.1959968
NLM
Tonatto MLP, Tarpani JR, Amico SC. Short-beam shear fatigue behavior of round curved pultruded composite [Internet]. Mechanics of Advanced Materials and Structures. 2022 ; 29( 26): 5579-5587.[citado 2025 nov. 24 ] Available from: https://doi.org/10.1080/15376494.2021.1959968
Vancouver
Tonatto MLP, Tarpani JR, Amico SC. Short-beam shear fatigue behavior of round curved pultruded composite [Internet]. Mechanics of Advanced Materials and Structures. 2022 ; 29( 26): 5579-5587.[citado 2025 nov. 24 ] Available from: https://doi.org/10.1080/15376494.2021.1959968
Artigo de periodico
Thermoformable fiberboards of wood pulp and nanofibrillated cellulose (2022)
Chiromito, Emanoele Maria Santos; Trovatti, Eliane ; Carvalho, Antonio Jose Felix
Fonte: Industrial Crops and Products. Unidade: EESC
Assuntos: PAINÉIS, MATERIAIS NANOESTRUTURADOS, MATERIAIS COMPÓSITOS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CHIROMITO, Emanoele Maria Santos e TROVATTI, Eliane e CARVALHO, Antonio Jose Felix. Thermoformable fiberboards of wood pulp and nanofibrillated cellulose. Industrial Crops and Products, v. 187, p. 1-7, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.indcrop.2022.115433. Acesso em: 24 nov. 2025.
APA
Chiromito, E. M. S., Trovatti, E., & Carvalho, A. J. F. (2022). Thermoformable fiberboards of wood pulp and nanofibrillated cellulose. Industrial Crops and Products, 187, 1-7. doi:10.1016/j.indcrop.2022.115433
NLM
Chiromito EMS, Trovatti E, Carvalho AJF. Thermoformable fiberboards of wood pulp and nanofibrillated cellulose [Internet]. Industrial Crops and Products. 2022 ; 187 1-7.[citado 2025 nov. 24 ] Available from: https://doi.org/10.1016/j.indcrop.2022.115433
Vancouver
Chiromito EMS, Trovatti E, Carvalho AJF. Thermoformable fiberboards of wood pulp and nanofibrillated cellulose [Internet]. Industrial Crops and Products. 2022 ; 187 1-7.[citado 2025 nov. 24 ] Available from: https://doi.org/10.1016/j.indcrop.2022.115433
Artigo de periodico
Design and validation of an innovative 3D printer containing a co-rotating twin screw extrusion unit (2022)
Justino Netto, Joaquim Manoel; Sarout, Amir Ilkiu; Santos, Andre Luiz Grando; Lucas, Alessandra de Almeida; Chinelatto, Marcelo Aparecido ; Alves, jorge Lino; Cunha, António Gaspar; Covas, José António; Silveira, Zilda de Castro
Fonte: Additive Manufacturing. Unidade: EESC
Assuntos: EXTRUSÃO, MANUFATURA ADITIVA, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JUSTINO NETTO, Joaquim Manoel et al. Design and validation of an innovative 3D printer containing a co-rotating twin screw extrusion unit. Additive Manufacturing, v. 59, p. 1-14, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.addma.2022.103192. Acesso em: 24 nov. 2025.
APA
Justino Netto, J. M., Sarout, A. I., Santos, A. L. G., Lucas, A. de A., Chinelatto, M. A., Alves, jorge L., et al. (2022). Design and validation of an innovative 3D printer containing a co-rotating twin screw extrusion unit. Additive Manufacturing, 59, 1-14. doi:10.1016/j.addma.2022.103192
NLM
Justino Netto JM, Sarout AI, Santos ALG, Lucas A de A, Chinelatto MA, Alves jorge L, Cunha AG, Covas JA, Silveira Z de C. Design and validation of an innovative 3D printer containing a co-rotating twin screw extrusion unit [Internet]. Additive Manufacturing. 2022 ; 59 1-14.[citado 2025 nov. 24 ] Available from: https://doi.org/10.1016/j.addma.2022.103192
Vancouver
Justino Netto JM, Sarout AI, Santos ALG, Lucas A de A, Chinelatto MA, Alves jorge L, Cunha AG, Covas JA, Silveira Z de C. Design and validation of an innovative 3D printer containing a co-rotating twin screw extrusion unit [Internet]. Additive Manufacturing. 2022 ; 59 1-14.[citado 2025 nov. 24 ] Available from: https://doi.org/10.1016/j.addma.2022.103192
Artigo de periodico
Role of nitrogen and yttrium contents in manufacturing (Cr, Y)Nx film nanostructures (2022)
Apolinário, Raíra Chefer ; Rodrigues, Alisson Mendes ; Avila, Pedro Renato Tavares; Pereira, Julia Nascimento; Ospina Ramirez, Carlos Alberto; Daum, Philipp; Costa, Fabiana Pereira da ; Lira, Helio de Lucena; Neves, Gelmires de Araújo ; Neves, Gelmires de Araújo ; Greiner, Christian; Pinto, Haroldo Cavalcanti
Fonte: Nanomaterials. Unidade: EESC
Assuntos: MICROSCOPIA ELETRÔNICA DE VARREDURA, NITROGÊNIO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
APOLINÁRIO, Raíra Chefer et al. Role of nitrogen and yttrium contents in manufacturing (Cr, Y)Nx film nanostructures. Nanomaterials, v. 12, p. 1-17, 2022Tradução . . Disponível em: https://doi.org/10.3390/nano12142410. Acesso em: 24 nov. 2025.
APA
Apolinário, R. C., Rodrigues, A. M., Avila, P. R. T., Pereira, J. N., Ospina Ramirez, C. A., Daum, P., et al. (2022). Role of nitrogen and yttrium contents in manufacturing (Cr, Y)Nx film nanostructures. Nanomaterials, 12, 1-17. doi:10.3390/nano12142410
NLM
Apolinário RC, Rodrigues AM, Avila PRT, Pereira JN, Ospina Ramirez CA, Daum P, Costa FP da, Lira H de L, Neves G de A, Neves G de A, Greiner C, Pinto HC. Role of nitrogen and yttrium contents in manufacturing (Cr, Y)Nx film nanostructures [Internet]. Nanomaterials. 2022 ; 12 1-17.[citado 2025 nov. 24 ] Available from: https://doi.org/10.3390/nano12142410
Vancouver
Apolinário RC, Rodrigues AM, Avila PRT, Pereira JN, Ospina Ramirez CA, Daum P, Costa FP da, Lira H de L, Neves G de A, Neves G de A, Greiner C, Pinto HC. Role of nitrogen and yttrium contents in manufacturing (Cr, Y)Nx film nanostructures [Internet]. Nanomaterials. 2022 ; 12 1-17.[citado 2025 nov. 24 ] Available from: https://doi.org/10.3390/nano12142410

Unidades USP

ReP

Filtros

Unidades USP

Departamento

Autores

Autores USP

Ano de publicação

Assuntos

Título da fonte

Editora

Nome do evento

País de publicação

Grupo de pesquisa

Agência de fomento

Indexado em

Afiliação dos autores externos não normalizada

País das instituições de afiliação dos autores externos