ReP USP - Resultado da busca

Artigo de periodico
Surface integrity of moulds for microcomponents manufactured by micromilling and electro-discharge machining (2014)
Bodziak, Sabrina; Souza, Adriano Fagali de; Rodrigues, Alessandro Roger; Diniz, Anselmo Eduardo; Coelho, Reginaldo Teixeira
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: AÇO, GABARITOS E MOLDES, FRESAGEM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BODZIAK, Sabrina et al. Surface integrity of moulds for microcomponents manufactured by micromilling and electro-discharge machining. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 36, n. 3, p. 623-635, 2014Tradução . . Disponível em: https://doi.org/10.1007/s40430-013-0108-9. Acesso em: 16 ago. 2024.
APA
Bodziak, S., Souza, A. F. de, Rodrigues, A. R., Diniz, A. E., & Coelho, R. T. (2014). Surface integrity of moulds for microcomponents manufactured by micromilling and electro-discharge machining. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 36( 3), 623-635. doi:10.1007/s40430-013-0108-9
NLM
Bodziak S, Souza AF de, Rodrigues AR, Diniz AE, Coelho RT. Surface integrity of moulds for microcomponents manufactured by micromilling and electro-discharge machining [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2014 ; 36( 3): 623-635.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s40430-013-0108-9
Vancouver
Bodziak S, Souza AF de, Rodrigues AR, Diniz AE, Coelho RT. Surface integrity of moulds for microcomponents manufactured by micromilling and electro-discharge machining [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2014 ; 36( 3): 623-635.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s40430-013-0108-9
Artigo de periodico
A method based on independent component analysis for adaptive decomposition of multiple power quality disturbances (2014)
Lima, Marcelo Antônio Alves; Coury, Denis Vinicius; Cerqueira, Augusto Santiago; Nascimento, Vítor Heloiz
Source: Journal of Control, Automation and Electrical Systems. Unidades: EP, EESC
Assunto: ENERGIA ELÉTRICA (QUALIDADE)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LIMA, Marcelo Antônio Alves et al. A method based on independent component analysis for adaptive decomposition of multiple power quality disturbances. Journal of Control, Automation and Electrical Systems, v. 25, n. 1, p. 80-92, 2014Tradução . . Disponível em: https://doi.org/10.1007/s40313-013-0088-0. Acesso em: 16 ago. 2024.
APA
Lima, M. A. A., Coury, D. V., Cerqueira, A. S., & Nascimento, V. H. (2014). A method based on independent component analysis for adaptive decomposition of multiple power quality disturbances. Journal of Control, Automation and Electrical Systems, 25( 1), 80-92. doi:10.1007/s40313-013-0088-0
NLM
Lima MAA, Coury DV, Cerqueira AS, Nascimento VH. A method based on independent component analysis for adaptive decomposition of multiple power quality disturbances [Internet]. Journal of Control, Automation and Electrical Systems. 2014 ; 25( 1): 80-92.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s40313-013-0088-0
Vancouver
Lima MAA, Coury DV, Cerqueira AS, Nascimento VH. A method based on independent component analysis for adaptive decomposition of multiple power quality disturbances [Internet]. Journal of Control, Automation and Electrical Systems. 2014 ; 25( 1): 80-92.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s40313-013-0088-0
Artigo de periodico
Direction of arrival uncertainty of adaptive beamformer based on a posteriori information (2014)
Endo, Wagner; Maciel, Carlos Dias; Scalassara, Paulo Rogério; Hirono, Fábio Casagrande
Source: Journal of Control, Automation and Electrical Systems. Unidade: EESC
Subjects: DINÂMICA ESTOCÁSTICA, INFERÊNCIA BAYESIANA, MEDIDA DE WIENER
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ENDO, Wagner et al. Direction of arrival uncertainty of adaptive beamformer based on a posteriori information. Journal of Control, Automation and Electrical Systems, v. 25, n. 1, p. 55-63, 2014Tradução . . Disponível em: https://doi.org/10.1007/s40313-013-0092-4. Acesso em: 16 ago. 2024.
APA
Endo, W., Maciel, C. D., Scalassara, P. R., & Hirono, F. C. (2014). Direction of arrival uncertainty of adaptive beamformer based on a posteriori information. Journal of Control, Automation and Electrical Systems, 25( 1), 55-63. doi:10.1007/s40313-013-0092-4
NLM
Endo W, Maciel CD, Scalassara PR, Hirono FC. Direction of arrival uncertainty of adaptive beamformer based on a posteriori information [Internet]. Journal of Control, Automation and Electrical Systems. 2014 ; 25( 1): 55-63.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s40313-013-0092-4
Vancouver
Endo W, Maciel CD, Scalassara PR, Hirono FC. Direction of arrival uncertainty of adaptive beamformer based on a posteriori information [Internet]. Journal of Control, Automation and Electrical Systems. 2014 ; 25( 1): 55-63.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s40313-013-0092-4
Artigo de periodico
Artificial neural network based approach for anti-islanding protection of distributed generators (2014)
Merlin, Victor Luiz; Santos, Ricardo Caneloi dos; Pavani, Ahda Pionkoski Grilo; Coury, Denis Vinicius; Oleskovicz, Mário; Vieira Júnior, José Carlos de Melo
Source: Journal of Control, Automation and Electrical Systems. Unidade: EESC
Subjects: REDES NEURAIS, PROTEÇÃO DE SISTEMAS ELÉTRICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MERLIN, Victor Luiz et al. Artificial neural network based approach for anti-islanding protection of distributed generators. Journal of Control, Automation and Electrical Systems, v. 25, n. 3, p. 339-348, 2014Tradução . . Disponível em: https://doi.org/10.1007/s40313-013-0096-0. Acesso em: 16 ago. 2024.
APA
Merlin, V. L., Santos, R. C. dos, Pavani, A. P. G., Coury, D. V., Oleskovicz, M., & Vieira Júnior, J. C. de M. (2014). Artificial neural network based approach for anti-islanding protection of distributed generators. Journal of Control, Automation and Electrical Systems, 25( 3), 339-348. doi:10.1007/s40313-013-0096-0
NLM
Merlin VL, Santos RC dos, Pavani APG, Coury DV, Oleskovicz M, Vieira Júnior JC de M. Artificial neural network based approach for anti-islanding protection of distributed generators [Internet]. Journal of Control, Automation and Electrical Systems. 2014 ; 25( 3): 339-348.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s40313-013-0096-0
Vancouver
Merlin VL, Santos RC dos, Pavani APG, Coury DV, Oleskovicz M, Vieira Júnior JC de M. Artificial neural network based approach for anti-islanding protection of distributed generators [Internet]. Journal of Control, Automation and Electrical Systems. 2014 ; 25( 3): 339-348.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s40313-013-0096-0
Artigo de periodico
A robust neural method to estimate torque in three-phase induction motor (2014)
Palácios, Rodrigo Henrique Cunha; Silva, Ivan Nunes da; Goedtel, Alessandro; Godoy, Wagner Fontes; Oleskovicz, Mário
Source: Journal of Control, Automation and Electrical Systems. Unidade: EESC
Subjects: REDES NEURAIS, ENERGIA ELÉTRICA (QUALIDADE), MOTORES DE INDUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PALÁCIOS, Rodrigo Henrique Cunha et al. A robust neural method to estimate torque in three-phase induction motor. Journal of Control, Automation and Electrical Systems, v. 25, n. 4, p. 493-502, 2014Tradução . . Disponível em: https://doi.org/10.1007/s40313-014-0118-6. Acesso em: 16 ago. 2024.
APA
Palácios, R. H. C., Silva, I. N. da, Goedtel, A., Godoy, W. F., & Oleskovicz, M. (2014). A robust neural method to estimate torque in three-phase induction motor. Journal of Control, Automation and Electrical Systems, 25( 4), 493-502. doi:10.1007/s40313-014-0118-6
NLM
Palácios RHC, Silva IN da, Goedtel A, Godoy WF, Oleskovicz M. A robust neural method to estimate torque in three-phase induction motor [Internet]. Journal of Control, Automation and Electrical Systems. 2014 ; 25( 4): 493-502.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s40313-014-0118-6
Vancouver
Palácios RHC, Silva IN da, Goedtel A, Godoy WF, Oleskovicz M. A robust neural method to estimate torque in three-phase induction motor [Internet]. Journal of Control, Automation and Electrical Systems. 2014 ; 25( 4): 493-502.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s40313-014-0118-6
Trabalho de evento-anais periodico
Development and application of a portable device for cutaneous thermal sensitivity assessment: characterizing the neurophatic pain following spinal cord injury (2014)
Varoto, Renato; Hirono, Fábio Casagrande; Zorzenoni, Fernando Ometto; Kido, Ricardo Yoshio Zanetti; Barcellos, William; Cliquet Junior, Alberto
Source: Communications in Computer and Information Science. Conference titles: International Joint Conference - BIOSTEC. Unidade: EESC
Subjects: BIOENGENHARIA, SENSIBILIDADE CUTÂNEA, TRAUMATISMOS DA MEDULA ESPINHAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
VAROTO, Renato et al. Development and application of a portable device for cutaneous thermal sensitivity assessment: characterizing the neurophatic pain following spinal cord injury. Communications in Computer and Information Science. Heidelberg, Germany: Springer-Verlag. Disponível em: https://doi.org/10.1007/978-3-662-44485-6. Acesso em: 16 ago. 2024. , 2014
APA
Varoto, R., Hirono, F. C., Zorzenoni, F. O., Kido, R. Y. Z., Barcellos, W., & Cliquet Junior, A. (2014). Development and application of a portable device for cutaneous thermal sensitivity assessment: characterizing the neurophatic pain following spinal cord injury. Communications in Computer and Information Science. Heidelberg, Germany: Springer-Verlag. doi:10.1007/978-3-662-44485-6
NLM
Varoto R, Hirono FC, Zorzenoni FO, Kido RYZ, Barcellos W, Cliquet Junior A. Development and application of a portable device for cutaneous thermal sensitivity assessment: characterizing the neurophatic pain following spinal cord injury [Internet]. Communications in Computer and Information Science. 2014 ; 452 41-53.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/978-3-662-44485-6
Vancouver
Varoto R, Hirono FC, Zorzenoni FO, Kido RYZ, Barcellos W, Cliquet Junior A. Development and application of a portable device for cutaneous thermal sensitivity assessment: characterizing the neurophatic pain following spinal cord injury [Internet]. Communications in Computer and Information Science. 2014 ; 452 41-53.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/978-3-662-44485-6
Artigo de periodico
Experimental analyses of metal-composite bonded joints: damage identification (2014)
Medeiros, Ricardo de; Borges, Emanuel Nunes; Tita, Volnei
Source: Applied Adhesion Science. Unidade: EESC
Subjects: INTEGRIDADE ESTRUTURAL, MATERIAIS COMPÓSITOS, JUNTAS ESTRUTURAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MEDEIROS, Ricardo de e BORGES, Emanuel Nunes e TITA, Volnei. Experimental analyses of metal-composite bonded joints: damage identification. Applied Adhesion Science, v. 2, n. 13, p. 1-17, 2014Tradução . . Disponível em: https://doi.org/10.1186/2196-4351-2-13. Acesso em: 16 ago. 2024.
APA
Medeiros, R. de, Borges, E. N., & Tita, V. (2014). Experimental analyses of metal-composite bonded joints: damage identification. Applied Adhesion Science, 2( 13), 1-17. doi:10.1186/2196-4351-2-13
NLM
Medeiros R de, Borges EN, Tita V. Experimental analyses of metal-composite bonded joints: damage identification [Internet]. Applied Adhesion Science. 2014 ; 2( 13): 1-17.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1186/2196-4351-2-13
Vancouver
Medeiros R de, Borges EN, Tita V. Experimental analyses of metal-composite bonded joints: damage identification [Internet]. Applied Adhesion Science. 2014 ; 2( 13): 1-17.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1186/2196-4351-2-13
Artigo de periodico
Verification and accuracy comparison of commercial CFD codes using hydrodynamic instability (2014)
Gennaro, Elmer Mateus; Simões, Leandro Guilherme Crenite; Malatesta, Vinicius; Reis, Danillo Cafaldo dos; Medeiros, Marcello Augusto Faraco de
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Assunto: MECÂNICA DOS FLUÍDOS COMPUTACIONAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GENNARO, Elmer Mateus et al. Verification and accuracy comparison of commercial CFD codes using hydrodynamic instability. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 36, n. Ja 2014, p. 59-68, 2014Tradução . . Disponível em: https://doi.org/10.1007/s40430-013-0057-3. Acesso em: 16 ago. 2024.
APA
Gennaro, E. M., Simões, L. G. C., Malatesta, V., Reis, D. C. dos, & Medeiros, M. A. F. de. (2014). Verification and accuracy comparison of commercial CFD codes using hydrodynamic instability. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 36( Ja 2014), 59-68. doi:10.1007/s40430-013-0057-3
NLM
Gennaro EM, Simões LGC, Malatesta V, Reis DC dos, Medeiros MAF de. Verification and accuracy comparison of commercial CFD codes using hydrodynamic instability [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2014 ; 36( Ja 2014): 59-68.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s40430-013-0057-3
Vancouver
Gennaro EM, Simões LGC, Malatesta V, Reis DC dos, Medeiros MAF de. Verification and accuracy comparison of commercial CFD codes using hydrodynamic instability [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2014 ; 36( Ja 2014): 59-68.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s40430-013-0057-3
Artigo de periodico
Synthetisches amorphes SiO2 (SAS) für die keramische Industrie (2014)
Fernandes, Leandro; Salomão, Rafael ; Arruda, Cezar C; Souza, Adriane Damasceno Vieira de
Source: Keramische Zeitschrift. Unidade: EESC
Assunto: INDÚSTRIA DA CERÂMICA E ARGILA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERNANDES, Leandro et al. Synthetisches amorphes SiO2 (SAS) für die keramische Industrie. Keramische Zeitschrift, v. no 2014, p. 301-306, 2014Tradução . . Disponível em: https://doi.org/10.1007/BF03400363. Acesso em: 16 ago. 2024.
APA
Fernandes, L., Salomão, R., Arruda, C. C., & Souza, A. D. V. de. (2014). Synthetisches amorphes SiO2 (SAS) für die keramische Industrie. Keramische Zeitschrift, no 2014, 301-306. doi:10.1007/BF03400363
NLM
Fernandes L, Salomão R, Arruda CC, Souza ADV de. Synthetisches amorphes SiO2 (SAS) für die keramische Industrie [Internet]. Keramische Zeitschrift. 2014 ; no 2014 301-306.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/BF03400363
Vancouver
Fernandes L, Salomão R, Arruda CC, Souza ADV de. Synthetisches amorphes SiO2 (SAS) für die keramische Industrie [Internet]. Keramische Zeitschrift. 2014 ; no 2014 301-306.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/BF03400363
Artigo de periodico
Continuous anaerobic bioreactor with a fixed-structure bed (ABFSB) for wastewater treatment with low solids and low applied organic loading content (2014)
Mockaitis, Gustavo; Pantoja, J. L. R.; Rodrigues, José Alberto Domingues; Foresti, Eugenio ; Zaiat, Marcelo
Source: Bioprocess and Biosystems Engineering: bioreactors, upstream and downstream processes, measurement and control. Unidade: EESC
Subjects: ÁGUAS RESIDUÁRIAS, REATORES BIOQUÍMICOS, REATORES ANAERÓBIOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOCKAITIS, Gustavo et al. Continuous anaerobic bioreactor with a fixed-structure bed (ABFSB) for wastewater treatment with low solids and low applied organic loading content. Bioprocess and Biosystems Engineering: bioreactors, upstream and downstream processes, measurement and control, v. 37, p. 1361–1368, 2014Tradução . . Disponível em: https://doi.org/10.1007/s00449-013-1108-y. Acesso em: 16 ago. 2024.
APA
Mockaitis, G., Pantoja, J. L. R., Rodrigues, J. A. D., Foresti, E., & Zaiat, M. (2014). Continuous anaerobic bioreactor with a fixed-structure bed (ABFSB) for wastewater treatment with low solids and low applied organic loading content. Bioprocess and Biosystems Engineering: bioreactors, upstream and downstream processes, measurement and control, 37, 1361–1368. doi:10.1007/s00449-013-1108-y
NLM
Mockaitis G, Pantoja JLR, Rodrigues JAD, Foresti E, Zaiat M. Continuous anaerobic bioreactor with a fixed-structure bed (ABFSB) for wastewater treatment with low solids and low applied organic loading content [Internet]. Bioprocess and Biosystems Engineering: bioreactors, upstream and downstream processes, measurement and control. 2014 ; 37 1361–1368.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s00449-013-1108-y
Vancouver
Mockaitis G, Pantoja JLR, Rodrigues JAD, Foresti E, Zaiat M. Continuous anaerobic bioreactor with a fixed-structure bed (ABFSB) for wastewater treatment with low solids and low applied organic loading content [Internet]. Bioprocess and Biosystems Engineering: bioreactors, upstream and downstream processes, measurement and control. 2014 ; 37 1361–1368.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s00449-013-1108-y
Artigo de periodico
A fuzzy control strategy for a diesel generating set under stand-alone and grid-connected operations (2014)
Reis, Giann Braune; Neves, Rodolpho Vilela Alves; Aguiar, Cassius Rossi de; Machado, Ricardo Quadros; Oliveira, Vilma Alves de
Source: Journal of Control, Automation and Electrical Systems. Unidade: EESC
Subjects: ENERGIA (CONTROLE;GERAÇÃO), LÓGICA FUZZY, SINCRONIZAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
REIS, Giann Braune et al. A fuzzy control strategy for a diesel generating set under stand-alone and grid-connected operations. Journal of Control, Automation and Electrical Systems, v. 25, n. 2, p. 174-183, 2014Tradução . . Disponível em: https://doi.org/10.1007/s40313-013-0094-2. Acesso em: 16 ago. 2024.
APA
Reis, G. B., Neves, R. V. A., Aguiar, C. R. de, Machado, R. Q., & Oliveira, V. A. de. (2014). A fuzzy control strategy for a diesel generating set under stand-alone and grid-connected operations. Journal of Control, Automation and Electrical Systems, 25( 2), 174-183. doi:10.1007/s40313-013-0094-2
NLM
Reis GB, Neves RVA, Aguiar CR de, Machado RQ, Oliveira VA de. A fuzzy control strategy for a diesel generating set under stand-alone and grid-connected operations [Internet]. Journal of Control, Automation and Electrical Systems. 2014 ; 25( 2): 174-183.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s40313-013-0094-2
Vancouver
Reis GB, Neves RVA, Aguiar CR de, Machado RQ, Oliveira VA de. A fuzzy control strategy for a diesel generating set under stand-alone and grid-connected operations [Internet]. Journal of Control, Automation and Electrical Systems. 2014 ; 25( 2): 174-183.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s40313-013-0094-2
Artigo de periodico
Proposal for a new structural and electrical crossarm standard for 15 kV distribution networks (2014)
Biasotto, Etienne; Oleskovicz, Mário; Coury, Denis Vinicius; Santos, Cláudio José dos
Source: Journal of Control, Automation and Electrical Systems. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, ELETROMAGNETISMO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BIASOTTO, Etienne et al. Proposal for a new structural and electrical crossarm standard for 15 kV distribution networks. Journal of Control, Automation and Electrical Systems, v. 25, n. 4, p. 516-526, 2014Tradução . . Disponível em: https://doi.org/10.1007/s40313-014-0123-9. Acesso em: 16 ago. 2024.
APA
Biasotto, E., Oleskovicz, M., Coury, D. V., & Santos, C. J. dos. (2014). Proposal for a new structural and electrical crossarm standard for 15 kV distribution networks. Journal of Control, Automation and Electrical Systems, 25( 4), 516-526. doi:10.1007/s40313-014-0123-9
NLM
Biasotto E, Oleskovicz M, Coury DV, Santos CJ dos. Proposal for a new structural and electrical crossarm standard for 15 kV distribution networks [Internet]. Journal of Control, Automation and Electrical Systems. 2014 ; 25( 4): 516-526.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s40313-014-0123-9
Vancouver
Biasotto E, Oleskovicz M, Coury DV, Santos CJ dos. Proposal for a new structural and electrical crossarm standard for 15 kV distribution networks [Internet]. Journal of Control, Automation and Electrical Systems. 2014 ; 25( 4): 516-526.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s40313-014-0123-9
Artigo de periodico
Erosion feature reclamation in urban areas: typical unsuccessful examples from Brazil (2014)
Rotta, Cláudia Marisse dos Santos; Zuquette, Lázaro Valentin
Source: Environmental Earth Sciences. Unidade: EESC
Subjects: EROSÃO (CONTROLE), REABILITAÇÃO, ESPAÇO URBANO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ROTTA, Cláudia Marisse dos Santos e ZUQUETTE, Lázaro Valentin. Erosion feature reclamation in urban areas: typical unsuccessful examples from Brazil. Environmental Earth Sciences, v. 72, n. 2, p. 535-555, 2014Tradução . . Disponível em: https://doi.org/10.1007/s12665-013-2974-y. Acesso em: 16 ago. 2024.
APA
Rotta, C. M. dos S., & Zuquette, L. V. (2014). Erosion feature reclamation in urban areas: typical unsuccessful examples from Brazil. Environmental Earth Sciences, 72( 2), 535-555. doi:10.1007/s12665-013-2974-y
NLM
Rotta CM dos S, Zuquette LV. Erosion feature reclamation in urban areas: typical unsuccessful examples from Brazil [Internet]. Environmental Earth Sciences. 2014 ; 72( 2): 535-555.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s12665-013-2974-y
Vancouver
Rotta CM dos S, Zuquette LV. Erosion feature reclamation in urban areas: typical unsuccessful examples from Brazil [Internet]. Environmental Earth Sciences. 2014 ; 72( 2): 535-555.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s12665-013-2974-y
Artigo de periodico
Characterization of synthetic amorphous silica (SAS) used in the ceramics industry (2014)
Fernandes, Leandro; Arruda, Cezar Carvalho de; Souza, Adriane Damasceno Vieira de; Salomão, Rafael
Source: Interceram : international ceramic review. Unidade: EESC
Subjects: MATERIAIS CERÂMICOS, SILÍCIO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERNANDES, Leandro et al. Characterization of synthetic amorphous silica (SAS) used in the ceramics industry. Interceram : international ceramic review, v. 2014 (63), n. 4, p. 220-224, 2014Tradução . . Disponível em: http://www.interceram-review.info/index.cfm?objekt=INTERC&jahr=2014&ausgabe=4&rubrik_en=High-Performance%20Ceramics&lang=EN&artikel_id=216742&navi=2. Acesso em: 16 ago. 2024.
APA
Fernandes, L., Arruda, C. C. de, Souza, A. D. V. de, & Salomão, R. (2014). Characterization of synthetic amorphous silica (SAS) used in the ceramics industry. Interceram : international ceramic review, 2014 (63)( 4), 220-224. Recuperado de http://www.interceram-review.info/index.cfm?objekt=INTERC&jahr=2014&ausgabe=4&rubrik_en=High-Performance%20Ceramics&lang=EN&artikel_id=216742&navi=2
NLM
Fernandes L, Arruda CC de, Souza ADV de, Salomão R. Characterization of synthetic amorphous silica (SAS) used in the ceramics industry [Internet]. Interceram : international ceramic review. 2014 ; 2014 (63)( 4): 220-224.[citado 2024 ago. 16 ] Available from: http://www.interceram-review.info/index.cfm?objekt=INTERC&jahr=2014&ausgabe=4&rubrik_en=High-Performance%20Ceramics&lang=EN&artikel_id=216742&navi=2
Vancouver
Fernandes L, Arruda CC de, Souza ADV de, Salomão R. Characterization of synthetic amorphous silica (SAS) used in the ceramics industry [Internet]. Interceram : international ceramic review. 2014 ; 2014 (63)( 4): 220-224.[citado 2024 ago. 16 ] Available from: http://www.interceram-review.info/index.cfm?objekt=INTERC&jahr=2014&ausgabe=4&rubrik_en=High-Performance%20Ceramics&lang=EN&artikel_id=216742&navi=2
Artigo de periodico
Development and analysis of series elastic actuators for impedance control of an active ankle–foot orthosis (2014)
Jardim, Bruno; Siqueira, Adriano Almeida Gonçalves
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: ROBÓTICA, MEMBROS INFERIORES, ROBÓTICA, TORNOZELO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JARDIM, Bruno e SIQUEIRA, Adriano Almeida Gonçalves. Development and analysis of series elastic actuators for impedance control of an active ankle–foot orthosis. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 36, n. 3, p. 501-510, 2014Tradução . . Disponível em: https://doi.org/10.1007/s40430-013-0092-0. Acesso em: 16 ago. 2024.
APA
Jardim, B., & Siqueira, A. A. G. (2014). Development and analysis of series elastic actuators for impedance control of an active ankle–foot orthosis. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 36( 3), 501-510. doi:10.1007/s40430-013-0092-0
NLM
Jardim B, Siqueira AAG. Development and analysis of series elastic actuators for impedance control of an active ankle–foot orthosis [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2014 ; 36( 3): 501-510.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s40430-013-0092-0
Vancouver
Jardim B, Siqueira AAG. Development and analysis of series elastic actuators for impedance control of an active ankle–foot orthosis [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2014 ; 36( 3): 501-510.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s40430-013-0092-0
Trabalho de evento-anais periodico
An agent-based model as a tool of planning at a sub-regional scale (2014)
Fonseca, Fernando Pereira da; Ramos, Rui A. R; Silva, Antônio Nélson Rodrigues da
Source: Proceedings. Conference titles: International Conference Computational Science and Its Applications – ICCSA 2014. Unidade: EESC
Assunto: PÓLO INDUSTRIAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FONSECA, Fernando Pereira da e RAMOS, Rui A. R e SILVA, Antônio Nélson Rodrigues da. An agent-based model as a tool of planning at a sub-regional scale. Proceedings. Cham.: Escola de Engenharia de São Carlos, Universidade de São Paulo. Disponível em: http://dx.doi.org/10.1007/978-3-319-09129-7_44. Acesso em: 16 ago. 2024. , 2014
APA
Fonseca, F. P. da, Ramos, R. A. R., & Silva, A. N. R. da. (2014). An agent-based model as a tool of planning at a sub-regional scale. Proceedings. Cham.: Escola de Engenharia de São Carlos, Universidade de São Paulo. doi:10.1007/978-3-319-09129-7_44
NLM
Fonseca FP da, Ramos RAR, Silva ANR da. An agent-based model as a tool of planning at a sub-regional scale [Internet]. Proceedings. 2014 ;[citado 2024 ago. 16 ] Available from: http://dx.doi.org/10.1007/978-3-319-09129-7_44
Vancouver
Fonseca FP da, Ramos RAR, Silva ANR da. An agent-based model as a tool of planning at a sub-regional scale [Internet]. Proceedings. 2014 ;[citado 2024 ago. 16 ] Available from: http://dx.doi.org/10.1007/978-3-319-09129-7_44
Artigo de periodico
Guideline tool based on design for manufacturing and assembly (DFMA) methodology for application on design and manufacturing of aircrafts (2014)
Barbosa, Gustavo F.; Carvalho, Jonas de
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: AERONAVES, MANUFATURA, DESENVOLVIMENTO DE PRODUTOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BARBOSA, Gustavo F. e CARVALHO, Jonas de. Guideline tool based on design for manufacturing and assembly (DFMA) methodology for application on design and manufacturing of aircrafts. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 36, n. 3, p. 605-614, 2014Tradução . . Disponível em: https://doi.org/10.1007/s40430-013-0103-1. Acesso em: 16 ago. 2024.
APA
Barbosa, G. F., & Carvalho, J. de. (2014). Guideline tool based on design for manufacturing and assembly (DFMA) methodology for application on design and manufacturing of aircrafts. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 36( 3), 605-614. doi:10.1007/s40430-013-0103-1
NLM
Barbosa GF, Carvalho J de. Guideline tool based on design for manufacturing and assembly (DFMA) methodology for application on design and manufacturing of aircrafts [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2014 ; 36( 3): 605-614.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s40430-013-0103-1
Vancouver
Barbosa GF, Carvalho J de. Guideline tool based on design for manufacturing and assembly (DFMA) methodology for application on design and manufacturing of aircrafts [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2014 ; 36( 3): 605-614.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s40430-013-0103-1
Artigo de periodico
Behaviour evaluation of GOOSE message traffic between power substations: a POTT scheme case study (2014)
Miranda, Juliano Coelho; Chemin Netto, Ulisses; Coury, Denis Vinicius; Oleskovicz, Mário
Source: Journal of Control, Automation and Electrical Systems. Unidade: EESC
Subjects: SUBESTAÇÕES ELÉTRICAS, ESTUDO DE CASO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MIRANDA, Juliano Coelho et al. Behaviour evaluation of GOOSE message traffic between power substations: a POTT scheme case study. Journal of Control, Automation and Electrical Systems, v. 25, n. 2, p. 262-271, 2014Tradução . . Disponível em: https://doi.org/10.1007/s40313-013-0087-1. Acesso em: 16 ago. 2024.
APA
Miranda, J. C., Chemin Netto, U., Coury, D. V., & Oleskovicz, M. (2014). Behaviour evaluation of GOOSE message traffic between power substations: a POTT scheme case study. Journal of Control, Automation and Electrical Systems, 25( 2), 262-271. doi:10.1007/s40313-013-0087-1
NLM
Miranda JC, Chemin Netto U, Coury DV, Oleskovicz M. Behaviour evaluation of GOOSE message traffic between power substations: a POTT scheme case study [Internet]. Journal of Control, Automation and Electrical Systems. 2014 ; 25( 2): 262-271.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s40313-013-0087-1
Vancouver
Miranda JC, Chemin Netto U, Coury DV, Oleskovicz M. Behaviour evaluation of GOOSE message traffic between power substations: a POTT scheme case study [Internet]. Journal of Control, Automation and Electrical Systems. 2014 ; 25( 2): 262-271.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s40313-013-0087-1
Artigo de periodico
Assessment of the accuracy of different standard methods for determining reservoir capacity and sedimentation (2014)
Estigoni, Marcus Vinícius; Matos, Artur José Soares; Mauad, Frederico Fábio
Source: Journal of Soils and Sediments. Unidade: EESC
Subjects: RESERVATÓRIOS, DEPOSIÇÃO DE SEDIMENTOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ESTIGONI, Marcus Vinícius e MATOS, Artur José Soares e MAUAD, Frederico Fábio. Assessment of the accuracy of different standard methods for determining reservoir capacity and sedimentation. Journal of Soils and Sediments, v. 14, n. 7, p. 1224-1234, 2014Tradução . . Disponível em: https://doi.org/10.1007/s11368-013-0816-x. Acesso em: 16 ago. 2024.
APA
Estigoni, M. V., Matos, A. J. S., & Mauad, F. F. (2014). Assessment of the accuracy of different standard methods for determining reservoir capacity and sedimentation. Journal of Soils and Sediments, 14( 7), 1224-1234. doi:10.1007/s11368-013-0816-x
NLM
Estigoni MV, Matos AJS, Mauad FF. Assessment of the accuracy of different standard methods for determining reservoir capacity and sedimentation [Internet]. Journal of Soils and Sediments. 2014 ; 14( 7): 1224-1234.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s11368-013-0816-x
Vancouver
Estigoni MV, Matos AJS, Mauad FF. Assessment of the accuracy of different standard methods for determining reservoir capacity and sedimentation [Internet]. Journal of Soils and Sediments. 2014 ; 14( 7): 1224-1234.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s11368-013-0816-x
Artigo de periodico
Do wood-based panels made with agro-industrial residues provide environmentally benign alternatives?: an LCA case study of sugarcane bagasse addition to particle board manufacturing (2014)
Silva, Diogo Aparecido Lopes; Lahr, Francisco Antonio Rocco; Pavan, Ana Laura Raymundo; Barrera Saavedra, Yovana Maria; Mendes, Natalia Crespo; Sousa, Sabrina Rodrigues; Sanches, Roberta; Ometto, Aldo Roberto
Source: International Journal of Life Cycle Assessment. Unidade: EESC
Subjects: CANA-DE-AÇÚCAR, CHAPA DE PARTÍCULAS, MATERIAIS RECICLÁVEIS, ESTUDO DE CASO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Diogo Aparecido Lopes et al. Do wood-based panels made with agro-industrial residues provide environmentally benign alternatives?: an LCA case study of sugarcane bagasse addition to particle board manufacturing. International Journal of Life Cycle Assessment, v. 19, n. 10, p. 1767-1778, 2014Tradução . . Disponível em: https://doi.org/10.1007/s11367-014-0776-4. Acesso em: 16 ago. 2024.
APA
Silva, D. A. L., Lahr, F. A. R., Pavan, A. L. R., Barrera Saavedra, Y. M., Mendes, N. C., Sousa, S. R., et al. (2014). Do wood-based panels made with agro-industrial residues provide environmentally benign alternatives?: an LCA case study of sugarcane bagasse addition to particle board manufacturing. International Journal of Life Cycle Assessment, 19( 10), 1767-1778. doi:10.1007/s11367-014-0776-4
NLM
Silva DAL, Lahr FAR, Pavan ALR, Barrera Saavedra YM, Mendes NC, Sousa SR, Sanches R, Ometto AR. Do wood-based panels made with agro-industrial residues provide environmentally benign alternatives?: an LCA case study of sugarcane bagasse addition to particle board manufacturing [Internet]. International Journal of Life Cycle Assessment. 2014 ; 19( 10): 1767-1778.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s11367-014-0776-4
Vancouver
Silva DAL, Lahr FAR, Pavan ALR, Barrera Saavedra YM, Mendes NC, Sousa SR, Sanches R, Ometto AR. Do wood-based panels made with agro-industrial residues provide environmentally benign alternatives?: an LCA case study of sugarcane bagasse addition to particle board manufacturing [Internet]. International Journal of Life Cycle Assessment. 2014 ; 19( 10): 1767-1778.[citado 2024 ago. 16 ] Available from: https://doi.org/10.1007/s11367-014-0776-4

USP Schools

ReP

Filtros

Departament

Authors

USP affiliated authors

Subjects

Source title

Indexado em

Non normalized affiliation