ReP USP - Resultado da busca

Trabalho de evento-anais periodico
An analytical model for estimating process parameters input in L-DED based on bead geometry (2024)
Ribeiro, Kandice Suane Barros ; Reghini, Ana Cecilia; Coelho, Reginaldo Teixeira
Source: Manufacturing Letters. Conference titles: SME North American Manufacturing Research Conference - NAMRC. Unidade: EESC
Subjects: MANUFATURA ADITIVA, IMPRESSÃO 3-D, LIGAS METÁLICAS, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Kandice Suane Barros e REGHINI, Ana Cecilia e COELHO, Reginaldo Teixeira. An analytical model for estimating process parameters input in L-DED based on bead geometry. Manufacturing Letters. Amsterdam, Netherlands: Escola de Engenharia de São Carlos, Universidade de São Paulo. Disponível em: https://dx.doi.org/10.1016/j.mfglet.2024.09.092. Acesso em: 18 nov. 2024. , 2024
APA
Ribeiro, K. S. B., Reghini, A. C., & Coelho, R. T. (2024). An analytical model for estimating process parameters input in L-DED based on bead geometry. Manufacturing Letters. Amsterdam, Netherlands: Escola de Engenharia de São Carlos, Universidade de São Paulo. doi:10.1016/j.mfglet.2024.09.092
NLM
Ribeiro KSB, Reghini AC, Coelho RT. An analytical model for estimating process parameters input in L-DED based on bead geometry [Internet]. Manufacturing Letters. 2024 ; 41 742-752.[citado 2024 nov. 18 ] Available from: https://dx.doi.org/10.1016/j.mfglet.2024.09.092
Vancouver
Ribeiro KSB, Reghini AC, Coelho RT. An analytical model for estimating process parameters input in L-DED based on bead geometry [Internet]. Manufacturing Letters. 2024 ; 41 742-752.[citado 2024 nov. 18 ] Available from: https://dx.doi.org/10.1016/j.mfglet.2024.09.092
Trabalho de evento-anais periodico
Evaluation of laser polishing as post-processing of inconel 625 produced by directed energy deposition (2021)
Ribeiro, Kandice Suane Barros ; Mariani, Fábio Edson; Idogava, Henrique Takashi; Silva, Gustavo C. da; Silveira, Zilda de Castro; Lima, Milton Sergio Fernandes de; Coelho, Reginaldo Teixeira
Source: Procedia Manufacturing. Conference titles: SME North American Manufacturing Research Conference - NAMRC. Unidade: EESC
Subjects: MANUFATURA ADITIVA, RUGOSIDADE SUPERFICIAL, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Kandice Suane Barros et al. Evaluation of laser polishing as post-processing of inconel 625 produced by directed energy deposition. Procedia Manufacturing. Amsterdam, Netherlands: Elsevier BV. Disponível em: https://doi.org/10.1016/j.promfg.2021.06.040. Acesso em: 18 nov. 2024. , 2021
APA
Ribeiro, K. S. B., Mariani, F. E., Idogava, H. T., Silva, G. C. da, Silveira, Z. de C., Lima, M. S. F. de, & Coelho, R. T. (2021). Evaluation of laser polishing as post-processing of inconel 625 produced by directed energy deposition. Procedia Manufacturing. Amsterdam, Netherlands: Elsevier BV. doi:10.1016/j.promfg.2021.06.040
NLM
Ribeiro KSB, Mariani FE, Idogava HT, Silva GC da, Silveira Z de C, Lima MSF de, Coelho RT. Evaluation of laser polishing as post-processing of inconel 625 produced by directed energy deposition [Internet]. Procedia Manufacturing. 2021 ; 53 368-374.[citado 2024 nov. 18 ] Available from: https://doi.org/10.1016/j.promfg.2021.06.040
Vancouver
Ribeiro KSB, Mariani FE, Idogava HT, Silva GC da, Silveira Z de C, Lima MSF de, Coelho RT. Evaluation of laser polishing as post-processing of inconel 625 produced by directed energy deposition [Internet]. Procedia Manufacturing. 2021 ; 53 368-374.[citado 2024 nov. 18 ] Available from: https://doi.org/10.1016/j.promfg.2021.06.040
Trabalho de evento-anais periodico
Innovative framework to manage new product development (NPD) integrating additive manufacturing (AM) and agile management (2021)
Almeida, Julia Fornaziero de; Amaral, Daniel Capaldo ; Coelho, Reginaldo Teixeira
Source: Procedia CIRP. Conference titles: CIRP Global Web Conference. Unidade: EESC
Subjects: DESENVOLVIMENTO DE PRODUTOS, PRODUTOS NOVOS, MANUFATURA ADITIVA, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALMEIDA, Julia Fornaziero de e AMARAL, Daniel Capaldo e COELHO, Reginaldo Teixeira. Innovative framework to manage new product development (NPD) integrating additive manufacturing (AM) and agile management. Procedia CIRP. Amsterdam, Netherlands: Elsevier BV. Disponível em: https://doi.org/10.1016/j.procir.2021.10.020. Acesso em: 18 nov. 2024. , 2021
APA
Almeida, J. F. de, Amaral, D. C., & Coelho, R. T. (2021). Innovative framework to manage new product development (NPD) integrating additive manufacturing (AM) and agile management. Procedia CIRP. Amsterdam, Netherlands: Elsevier BV. doi:10.1016/j.procir.2021.10.020
NLM
Almeida JF de, Amaral DC, Coelho RT. Innovative framework to manage new product development (NPD) integrating additive manufacturing (AM) and agile management [Internet]. Procedia CIRP. 2021 ; 103 128-133.[citado 2024 nov. 18 ] Available from: https://doi.org/10.1016/j.procir.2021.10.020
Vancouver
Almeida JF de, Amaral DC, Coelho RT. Innovative framework to manage new product development (NPD) integrating additive manufacturing (AM) and agile management [Internet]. Procedia CIRP. 2021 ; 103 128-133.[citado 2024 nov. 18 ] Available from: https://doi.org/10.1016/j.procir.2021.10.020
Trabalho de evento-anais periodico
A novel melt pool mapping technique towards the online monitoring of directed energy deposition operations (2021)
Ribeiro, Kandice Suane Barros ; Nuñez, Henrique Hiram Libutti; Jones, Jason B; Coates, Peter; Coelho, Reginaldo Teixeira
Source: Procedia Manufacturing. Conference titles: SME North American Manufacturing Research Conference - NAMRC. Unidades: EESC, ICMC
Subjects: MANUFATURA, DESENVOLVIMENTO DE SOFTWARE, BENCHMARKS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Kandice Suane Barros et al. A novel melt pool mapping technique towards the online monitoring of directed energy deposition operations. Procedia Manufacturing. Amsterdam: Escola de Engenharia de São Carlos, Universidade de São Paulo. Disponível em: https://doi.org/10.1016/j.promfg.2021.06.058. Acesso em: 18 nov. 2024. , 2021
APA
Ribeiro, K. S. B., Nuñez, H. H. L., Jones, J. B., Coates, P., & Coelho, R. T. (2021). A novel melt pool mapping technique towards the online monitoring of directed energy deposition operations. Procedia Manufacturing. Amsterdam: Escola de Engenharia de São Carlos, Universidade de São Paulo. doi:10.1016/j.promfg.2021.06.058
NLM
Ribeiro KSB, Nuñez HHL, Jones JB, Coates P, Coelho RT. A novel melt pool mapping technique towards the online monitoring of directed energy deposition operations [Internet]. Procedia Manufacturing. 2021 ; 53 576-584.[citado 2024 nov. 18 ] Available from: https://doi.org/10.1016/j.promfg.2021.06.058
Vancouver
Ribeiro KSB, Nuñez HHL, Jones JB, Coates P, Coelho RT. A novel melt pool mapping technique towards the online monitoring of directed energy deposition operations [Internet]. Procedia Manufacturing. 2021 ; 53 576-584.[citado 2024 nov. 18 ] Available from: https://doi.org/10.1016/j.promfg.2021.06.058
Trabalho de evento-anais periodico
Algorithms-aided design applied to the tool-paths generation for hybrid manufacturing (2021)
Dávila, Jose Luis; Inforçatti Neto, Paulo; Noritomi, Pedro Yoshito; Coelho, Reginaldo Teixeira ; Silva, Jorge Vicente Lopes da
Source: Manufacturing Letters. Unidade: EESC
Subjects: ALGORITMOS, MANUFATURA ADITIVA, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DÁVILA, Jose Luis et al. Algorithms-aided design applied to the tool-paths generation for hybrid manufacturing. Manufacturing Letters. Amsterdam, Netherlands: Elsevier BV. Disponível em: https://doi.org/10.1016/j.mfglet.2020.12.003. Acesso em: 18 nov. 2024. , 2021
APA
Dávila, J. L., Inforçatti Neto, P., Noritomi, P. Y., Coelho, R. T., & Silva, J. V. L. da. (2021). Algorithms-aided design applied to the tool-paths generation for hybrid manufacturing. Manufacturing Letters. Amsterdam, Netherlands: Elsevier BV. doi:10.1016/j.mfglet.2020.12.003
NLM
Dávila JL, Inforçatti Neto P, Noritomi PY, Coelho RT, Silva JVL da. Algorithms-aided design applied to the tool-paths generation for hybrid manufacturing [Internet]. Manufacturing Letters. 2021 ; 27 53-57.[citado 2024 nov. 18 ] Available from: https://doi.org/10.1016/j.mfglet.2020.12.003
Vancouver
Dávila JL, Inforçatti Neto P, Noritomi PY, Coelho RT, Silva JVL da. Algorithms-aided design applied to the tool-paths generation for hybrid manufacturing [Internet]. Manufacturing Letters. 2021 ; 27 53-57.[citado 2024 nov. 18 ] Available from: https://doi.org/10.1016/j.mfglet.2020.12.003
Trabalho de evento-anais periodico
A study of different deposition strategies in direct energy deposition (DED) processes (2020)
Ribeiro, Kandice Suane Barros ; Mariani, Fábio Edson; Coelho, Reginaldo Teixeira
Source: Procedia Manufacturing. Conference titles: North American Manufacturing Research Conference - NAMRC 48. Unidade: EESC
Assunto: ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Kandice Suane Barros e MARIANI, Fábio Edson e COELHO, Reginaldo Teixeira. A study of different deposition strategies in direct energy deposition (DED) processes. Procedia Manufacturing. Amsterdam, Netherlands: Elsevier. Disponível em: https://doi.org/10.1016/j.promfg.2020.05.158. Acesso em: 18 nov. 2024. , 2020
APA
Ribeiro, K. S. B., Mariani, F. E., & Coelho, R. T. (2020). A study of different deposition strategies in direct energy deposition (DED) processes. Procedia Manufacturing. Amsterdam, Netherlands: Elsevier. doi:10.1016/j.promfg.2020.05.158
NLM
Ribeiro KSB, Mariani FE, Coelho RT. A study of different deposition strategies in direct energy deposition (DED) processes [Internet]. Procedia Manufacturing. 2020 ; 48 663-670.[citado 2024 nov. 18 ] Available from: https://doi.org/10.1016/j.promfg.2020.05.158
Vancouver
Ribeiro KSB, Mariani FE, Coelho RT. A study of different deposition strategies in direct energy deposition (DED) processes [Internet]. Procedia Manufacturing. 2020 ; 48 663-670.[citado 2024 nov. 18 ] Available from: https://doi.org/10.1016/j.promfg.2020.05.158
Trabalho de evento-anais periodico
An initial investigation of tungsten inert gas (TIG) torch as heat source for additive manufacturing (AM) process (2020)
Moreira, Alcindo Fernando; Ribeiro, Kandice Suane Barros; Mariani, Fábio Edson; Coelho, Reginaldo Teixeira
Source: Procedia Manufacturing. Conference titles: North American Manufacturing Research Conference - NAMRC. Unidade: EESC
Subjects: USINAGEM, MANUFATURA, SOLDAGEM, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOREIRA, Alcindo Fernando et al. An initial investigation of tungsten inert gas (TIG) torch as heat source for additive manufacturing (AM) process. Procedia Manufacturing. Amsterdam, Netherlands: Elsevier. Disponível em: https://doi.org/10.1016/j.promfg.2020.05.159. Acesso em: 18 nov. 2024. , 2020
APA
Moreira, A. F., Ribeiro, K. S. B., Mariani, F. E., & Coelho, R. T. (2020). An initial investigation of tungsten inert gas (TIG) torch as heat source for additive manufacturing (AM) process. Procedia Manufacturing. Amsterdam, Netherlands: Elsevier. doi:10.1016/j.promfg.2020.05.159
NLM
Moreira AF, Ribeiro KSB, Mariani FE, Coelho RT. An initial investigation of tungsten inert gas (TIG) torch as heat source for additive manufacturing (AM) process [Internet]. Procedia Manufacturing. 2020 ; 48 671-677.[citado 2024 nov. 18 ] Available from: https://doi.org/10.1016/j.promfg.2020.05.159
Vancouver
Moreira AF, Ribeiro KSB, Mariani FE, Coelho RT. An initial investigation of tungsten inert gas (TIG) torch as heat source for additive manufacturing (AM) process [Internet]. Procedia Manufacturing. 2020 ; 48 671-677.[citado 2024 nov. 18 ] Available from: https://doi.org/10.1016/j.promfg.2020.05.159
Trabalho de evento-anais periodico
An experimental method to determine the minimum uncut chip thickness (hmin) in orthogonal cutting (2017)
Coelho, Reginaldo Teixeira ; Diniz, Anselmo Eduardo; Silva, Tatiany M. da
Source: Procedia Manufacturing. Conference titles: North American Manufacturing Research Conference - NAMRC 45. Unidade: EESC
Assunto: ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COELHO, Reginaldo Teixeira e DINIZ, Anselmo Eduardo e SILVA, Tatiany M. da. An experimental method to determine the minimum uncut chip thickness (hmin) in orthogonal cutting. Procedia Manufacturing. Amsterdam, Netherlands: Elsevier. Disponível em: https://doi.org/10.1016/j.promfg.2017.07.047. Acesso em: 18 nov. 2024. , 2017
APA
Coelho, R. T., Diniz, A. E., & Silva, T. M. da. (2017). An experimental method to determine the minimum uncut chip thickness (hmin) in orthogonal cutting. Procedia Manufacturing. Amsterdam, Netherlands: Elsevier. doi:10.1016/j.promfg.2017.07.047
NLM
Coelho RT, Diniz AE, Silva TM da. An experimental method to determine the minimum uncut chip thickness (hmin) in orthogonal cutting [Internet]. Procedia Manufacturing. 2017 ; 10 194-207.[citado 2024 nov. 18 ] Available from: https://doi.org/10.1016/j.promfg.2017.07.047
Vancouver
Coelho RT, Diniz AE, Silva TM da. An experimental method to determine the minimum uncut chip thickness (hmin) in orthogonal cutting [Internet]. Procedia Manufacturing. 2017 ; 10 194-207.[citado 2024 nov. 18 ] Available from: https://doi.org/10.1016/j.promfg.2017.07.047
Artigo de periodico
Dynamic jamming in dense suspensions: Surface finishing and edge honing applications (2017)
Span, Joseph; Koshy, Philip; Klocke, Fritz; Muller, Sebastian; Coelho, Reginaldo Teixeira
Source: CIRP Annals - Manufacturing Technology. Unidade: EESC
Assunto: ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SPAN, Joseph et al. Dynamic jamming in dense suspensions: Surface finishing and edge honing applications. CIRP Annals - Manufacturing Technology, v. 66, p. 321-324, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.cirp.2017.04.082. Acesso em: 18 nov. 2024.
APA
Span, J., Koshy, P., Klocke, F., Muller, S., & Coelho, R. T. (2017). Dynamic jamming in dense suspensions: Surface finishing and edge honing applications. CIRP Annals - Manufacturing Technology, 66, 321-324. doi:10.1016/j.cirp.2017.04.082
NLM
Span J, Koshy P, Klocke F, Muller S, Coelho RT. Dynamic jamming in dense suspensions: Surface finishing and edge honing applications [Internet]. CIRP Annals - Manufacturing Technology. 2017 ; 66 321-324.[citado 2024 nov. 18 ] Available from: https://doi.org/10.1016/j.cirp.2017.04.082
Vancouver
Span J, Koshy P, Klocke F, Muller S, Coelho RT. Dynamic jamming in dense suspensions: Surface finishing and edge honing applications [Internet]. CIRP Annals - Manufacturing Technology. 2017 ; 66 321-324.[citado 2024 nov. 18 ] Available from: https://doi.org/10.1016/j.cirp.2017.04.082
Artigo de periodico
Dry grinding process with workpiece precooling (2015)
Oliveira, João Fernando Gomes de; Silva, Eraldo Jannone da; Coelho, Reginaldo Teixeira ; Brozek, Lukas; Bottene, Alex Camilli; Marcos, Gustavo P.
Source: CIRP Annals - Manufacturing Technology. Unidade: EESC
Subjects: MOAGEM, TEMPERATURA, USINAGEM, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, João Fernando Gomes de et al. Dry grinding process with workpiece precooling. CIRP Annals - Manufacturing Technology, v. 64, n. 1, p. 329-332, 2015Tradução . . Disponível em: https://doi.org/10.1016/j.cirp.2015.04.098. Acesso em: 18 nov. 2024.
APA
Oliveira, J. F. G. de, Silva, E. J. da, Coelho, R. T., Brozek, L., Bottene, A. C., & Marcos, G. P. (2015). Dry grinding process with workpiece precooling. CIRP Annals - Manufacturing Technology, 64( 1), 329-332. doi:10.1016/j.cirp.2015.04.098
NLM
Oliveira JFG de, Silva EJ da, Coelho RT, Brozek L, Bottene AC, Marcos GP. Dry grinding process with workpiece precooling [Internet]. CIRP Annals - Manufacturing Technology. 2015 ; 64( 1): 329-332.[citado 2024 nov. 18 ] Available from: https://doi.org/10.1016/j.cirp.2015.04.098
Vancouver
Oliveira JFG de, Silva EJ da, Coelho RT, Brozek L, Bottene AC, Marcos GP. Dry grinding process with workpiece precooling [Internet]. CIRP Annals - Manufacturing Technology. 2015 ; 64( 1): 329-332.[citado 2024 nov. 18 ] Available from: https://doi.org/10.1016/j.cirp.2015.04.098
Parte de monografia/livro
Machining process simulation (2012)
Nascimento, Claudia H.; Rodrigues, Alessandro Roger ; Coelho, Reginaldo Teixeira
Source: Computational Modelling of Objects Represented in Images - Fundamentals, Methods and Applications III. Conference titles: Computational Modeling of Objects Presented in Images (CompIMAGE). Unidade: EESC
Subjects: USINAGEM, INDÚSTRIA AUTOMOBILÍSTICA, AÇO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
NASCIMENTO, Claudia H. e RODRIGUES, Alessandro Roger e COELHO, Reginaldo Teixeira. Machining process simulation. Computational Modelling of Objects Represented in Images - Fundamentals, Methods and Applications III. Tradução . Leiden: CRC Press, 2012. p. 313-317. Disponível em: https://doi.org/10.1201/b12753-58. Acesso em: 18 nov. 2024.
APA
Nascimento, C. H., Rodrigues, A. R., & Coelho, R. T. (2012). Machining process simulation. In Computational Modelling of Objects Represented in Images - Fundamentals, Methods and Applications III (p. 313-317). Leiden: CRC Press. doi:10.1201/b12753-58
NLM
Nascimento CH, Rodrigues AR, Coelho RT. Machining process simulation [Internet]. In: Computational Modelling of Objects Represented in Images - Fundamentals, Methods and Applications III. Leiden: CRC Press; 2012. p. 313-317.[citado 2024 nov. 18 ] Available from: https://doi.org/10.1201/b12753-58
Vancouver
Nascimento CH, Rodrigues AR, Coelho RT. Machining process simulation [Internet]. In: Computational Modelling of Objects Represented in Images - Fundamentals, Methods and Applications III. Leiden: CRC Press; 2012. p. 313-317.[citado 2024 nov. 18 ] Available from: https://doi.org/10.1201/b12753-58

USP Schools

ReP

Filtros

Authors

USP affiliated authors

Date published

Subjects

Conference titles

Funding Agencies

Indexado em

Non normalized affiliation

Countries of institutions of collaboration