Menu

Filtros : "MANUFATURA" "Inglês" Removido: "Barari, Ahmad" Limpar

Filtros

Limitar por data

1 - 20 (142 registros)

  • Artigo de periodico

    Improving the quality assessment of drilled holes in aircraft structures (2023)

    Kawano, Frederico Leoni Franco; Toledo, Claudio Fabiano Motta ; Barbosa, Gustavo Franco; Sagawa, Juliana Keiko ; Shiki, Sidney Bruce

    Fonte: International Journal of Advanced Manufacturing. Unidade: ICMC

    Assuntos: MANUFATURA, INDÚSTRIA 4.0, ESTUDO DE CASO, REDES NEURAIS

    PrivadoAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      KAWANO, Frederico Leoni Franco et al. Improving the quality assessment of drilled holes in aircraft structures. International Journal of Advanced Manufacturing, v. 128, p. 1155-1168, 2023Tradução . . Disponível em: https://doi.org/10.1007/s00170-023-11697-3. Acesso em: 19 jul. 2024.

    • APA

      Kawano, F. L. F., Toledo, C. F. M., Barbosa, G. F., Sagawa, J. K., & Shiki, S. B. (2023). Improving the quality assessment of drilled holes in aircraft structures. International Journal of Advanced Manufacturing, 128, 1155-1168. doi:10.1007/s00170-023-11697-3

    • NLM

      Kawano FLF, Toledo CFM, Barbosa GF, Sagawa JK, Shiki SB. Improving the quality assessment of drilled holes in aircraft structures [Internet]. International Journal of Advanced Manufacturing. 2023 ; 128 1155-1168.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1007/s00170-023-11697-3

    • Vancouver

      Kawano FLF, Toledo CFM, Barbosa GF, Sagawa JK, Shiki SB. Improving the quality assessment of drilled holes in aircraft structures [Internet]. International Journal of Advanced Manufacturing. 2023 ; 128 1155-1168.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1007/s00170-023-11697-3

  • Artigo de periodico

    Beam search-based heuristics for the mixed no-idle fowshop with total fowtime criterion (2022)

    Rossi, Fernando Luis; Nagano, Marcelo Seido

    Fonte: OR Spectrum. Unidade: EESC

    Assuntos: HEURÍSTICA, MANUFATURA, ENGENHARIA DE PRODUÇÃO

    PrivadoAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      ROSSI, Fernando Luis e NAGANO, Marcelo Seido. Beam search-based heuristics for the mixed no-idle fowshop with total fowtime criterion. OR Spectrum, p. 1-36, 2022Tradução . . Disponível em: https://doi.org/10.1007/s00291-022-00678-9. Acesso em: 19 jul. 2024.

    • APA

      Rossi, F. L., & Nagano, M. S. (2022). Beam search-based heuristics for the mixed no-idle fowshop with total fowtime criterion. OR Spectrum, 1-36. doi:10.1007/s00291-022-00678-9

    • NLM

      Rossi FL, Nagano MS. Beam search-based heuristics for the mixed no-idle fowshop with total fowtime criterion [Internet]. OR Spectrum. 2022 ; 1-36.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1007/s00291-022-00678-9

    • Vancouver

      Rossi FL, Nagano MS. Beam search-based heuristics for the mixed no-idle fowshop with total fowtime criterion [Internet]. OR Spectrum. 2022 ; 1-36.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1007/s00291-022-00678-9

  • Dissertação (Mestrado)

    Brazilian textile and fashion industry: social aspects towards circular economy (2022)

    Galatti, Leticia Gabriela; Baruque Ramos, Julia (Orientador)

    Unidade: EACH

    Assuntos: INDÚSTRIA TÊXTIL, MODA, ECONOMIA CIRCULAR, MANUFATURA

    Acesso à fonteAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      GALATTI, Leticia Gabriela. Brazilian textile and fashion industry: social aspects towards circular economy. 2022. Dissertação (Mestrado) – Universidade de São Paulo, São Paulo, 2022. Disponível em: https://www.teses.usp.br/teses/disponiveis/100/100133/tde-23052022-162627/. Acesso em: 19 jul. 2024.

    • APA

      Galatti, L. G. (2022). Brazilian textile and fashion industry: social aspects towards circular economy (Dissertação (Mestrado). Universidade de São Paulo, São Paulo. Recuperado de https://www.teses.usp.br/teses/disponiveis/100/100133/tde-23052022-162627/

    • NLM

      Galatti LG. Brazilian textile and fashion industry: social aspects towards circular economy [Internet]. 2022 ;[citado 2024 jul. 19 ] Available from: https://www.teses.usp.br/teses/disponiveis/100/100133/tde-23052022-162627/

    • Vancouver

      Galatti LG. Brazilian textile and fashion industry: social aspects towards circular economy [Internet]. 2022 ;[citado 2024 jul. 19 ] Available from: https://www.teses.usp.br/teses/disponiveis/100/100133/tde-23052022-162627/

  • Dissertação (Mestrado)

    Is manufacturing still the engine of growth?: A multi sector analysis with a common correlated effects approach (2021)

    Silva, Caíque Ferreira; Kannebley Júnior, Sérgio (Orientador)

    Unidade: FEARP

    Assuntos: MANUFATURA, ECONOMIA, DESENVOLVIMENTO ECONÔMICO, SETOR TERCIÁRIO

    Acesso à fonteAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      SILVA, Caíque Ferreira. Is manufacturing still the engine of growth?: A multi sector analysis with a common correlated effects approach. 2021. Dissertação (Mestrado) – Universidade de São Paulo, Ribeirão Preto, 2021. Disponível em: https://www.teses.usp.br/teses/disponiveis/96/96131/tde-23092021-145142/. Acesso em: 19 jul. 2024.

    • APA

      Silva, C. F. (2021). Is manufacturing still the engine of growth?: A multi sector analysis with a common correlated effects approach (Dissertação (Mestrado). Universidade de São Paulo, Ribeirão Preto. Recuperado de https://www.teses.usp.br/teses/disponiveis/96/96131/tde-23092021-145142/

    • NLM

      Silva CF. Is manufacturing still the engine of growth?: A multi sector analysis with a common correlated effects approach [Internet]. 2021 ;[citado 2024 jul. 19 ] Available from: https://www.teses.usp.br/teses/disponiveis/96/96131/tde-23092021-145142/

    • Vancouver

      Silva CF. Is manufacturing still the engine of growth?: A multi sector analysis with a common correlated effects approach [Internet]. 2021 ;[citado 2024 jul. 19 ] Available from: https://www.teses.usp.br/teses/disponiveis/96/96131/tde-23092021-145142/

  • Artigo de periodico

    Effects of laser polishing on surface characteristics and wettability of directed energy-deposited 316L stainless steel (2021)

    Souza, Adriel Magalhães; Ferreira, Rodrigo; Barragán, German; Grass Nuñez, Johan; Mariani, Fábio Edson; Silva, Eraldo Jannone da ; Coelho, Reginaldo Teixeira

    Fonte: Journal of Materials Engineering and Performance. Unidade: EESC

    Assuntos: AÇO INOXIDÁVEL, MANUFATURA, SUPERFÍCIES, ENGENHARIA DE PRODUÇÃO

    PrivadoAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      SOUZA, Adriel Magalhães et al. Effects of laser polishing on surface characteristics and wettability of directed energy-deposited 316L stainless steel. Journal of Materials Engineering and Performance, p. 1-14, 2021Tradução . . Disponível em: https://doi.org/10.1007/s11665-021-05991-y. Acesso em: 19 jul. 2024.

    • APA

      Souza, A. M., Ferreira, R., Barragán, G., Grass Nuñez, J., Mariani, F. E., Silva, E. J. da, & Coelho, R. T. (2021). Effects of laser polishing on surface characteristics and wettability of directed energy-deposited 316L stainless steel. Journal of Materials Engineering and Performance, 1-14. doi:10.1007/s11665-021-05991-y

    • NLM

      Souza AM, Ferreira R, Barragán G, Grass Nuñez J, Mariani FE, Silva EJ da, Coelho RT. Effects of laser polishing on surface characteristics and wettability of directed energy-deposited 316L stainless steel [Internet]. Journal of Materials Engineering and Performance. 2021 ; 1-14.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1007/s11665-021-05991-y

    • Vancouver

      Souza AM, Ferreira R, Barragán G, Grass Nuñez J, Mariani FE, Silva EJ da, Coelho RT. Effects of laser polishing on surface characteristics and wettability of directed energy-deposited 316L stainless steel [Internet]. Journal of Materials Engineering and Performance. 2021 ; 1-14.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1007/s11665-021-05991-y

  • Artigo de periodico

    Screw-assisted 3D printing with granulated materials: a systematic review (2021)

    Justino Netto, Joaquim Manoel; Idogava, Henrique Takashi; Santos, Luiz Eduardo Frezzatto; Silveira, Zilda de Castro; Romio, Pedro; Alves, Jorge Lino

    Fonte: International Journal of Advanced Manufacturing Technology. Unidade: EESC

    Assuntos: MANUFATURA, EXTRUSÃO, TERCEIRA DIMENSÃO, ENGENHARIA MECÂNICA

    PrivadoAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      JUSTINO NETTO, Joaquim Manoel et al. Screw-assisted 3D printing with granulated materials: a systematic review. International Journal of Advanced Manufacturing Technology, p. 1-17, 2021Tradução . . Disponível em: https://doi.org/10.1007/s00170-021-07365-z. Acesso em: 19 jul. 2024.

    • APA

      Justino Netto, J. M., Idogava, H. T., Santos, L. E. F., Silveira, Z. de C., Romio, P., & Alves, J. L. (2021). Screw-assisted 3D printing with granulated materials: a systematic review. International Journal of Advanced Manufacturing Technology, 1-17. doi:10.1007/s00170-021-07365-z

    • NLM

      Justino Netto JM, Idogava HT, Santos LEF, Silveira Z de C, Romio P, Alves JL. Screw-assisted 3D printing with granulated materials: a systematic review [Internet]. International Journal of Advanced Manufacturing Technology. 2021 ; 1-17.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1007/s00170-021-07365-z

    • Vancouver

      Justino Netto JM, Idogava HT, Santos LEF, Silveira Z de C, Romio P, Alves JL. Screw-assisted 3D printing with granulated materials: a systematic review [Internet]. International Journal of Advanced Manufacturing Technology. 2021 ; 1-17.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1007/s00170-021-07365-z

  • Artigo de periodico

    Topology optimization of composite hyperelastic material using SPIMFO-method (2021)

    Silva, Andre Luis Ferreira da ; Salas, Ruben Andres ; Silva, Emílio Carlos Nelli

    Fonte: Meccanica. Unidade: EP

    Assuntos: TOPOLOGIA, TRANSFERÊNCIA DE TECNOLOGIA, MANUFATURA, MATERIAIS COMPÓSITOS

    PrivadoAcesso à fonteAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      SILVA, Andre Luis Ferreira da e SALAS, Ruben Andres e SILVA, Emílio Carlos Nelli. Topology optimization of composite hyperelastic material using SPIMFO-method. Meccanica, v. 56, p. 417–437, 2021Tradução . . Disponível em: https://doi.org/10.1007/s11012-020-01277-0. Acesso em: 19 jul. 2024.

    • APA

      Silva, A. L. F. da, Salas, R. A., & Silva, E. C. N. (2021). Topology optimization of composite hyperelastic material using SPIMFO-method. Meccanica, 56, 417–437. doi:10.1007/s11012-020-01277-0

    • NLM

      Silva ALF da, Salas RA, Silva ECN. Topology optimization of composite hyperelastic material using SPIMFO-method [Internet]. Meccanica. 2021 ; 56 417–437.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1007/s11012-020-01277-0

    • Vancouver

      Silva ALF da, Salas RA, Silva ECN. Topology optimization of composite hyperelastic material using SPIMFO-method [Internet]. Meccanica. 2021 ; 56 417–437.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1007/s11012-020-01277-0

  • Artigo de periodico

    Design and numerical evaluation of quadrotor drone frame suitable for fabrication using fused flament fabrication with consumer‑grade ABS (2021)

    Oliveira, Tarcisio Ladeia de; Carvalho, Jonas de

    Fonte: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC

    Assuntos: MÉTODO DOS ELEMENTOS FINITOS, AERONAVES NÃO TRIPULADAS, MANUFATURA, ENGENHARIA MECÂNICA

    PrivadoAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      OLIVEIRA, Tarcisio Ladeia de e CARVALHO, Jonas de. Design and numerical evaluation of quadrotor drone frame suitable for fabrication using fused flament fabrication with consumer‑grade ABS. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-19, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03160-9. Acesso em: 19 jul. 2024.

    • APA

      Oliveira, T. L. de, & Carvalho, J. de. (2021). Design and numerical evaluation of quadrotor drone frame suitable for fabrication using fused flament fabrication with consumer‑grade ABS. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-19. doi:10.1007/s40430-021-03160-9

    • NLM

      Oliveira TL de, Carvalho J de. Design and numerical evaluation of quadrotor drone frame suitable for fabrication using fused flament fabrication with consumer‑grade ABS [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-19.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1007/s40430-021-03160-9

    • Vancouver

      Oliveira TL de, Carvalho J de. Design and numerical evaluation of quadrotor drone frame suitable for fabrication using fused flament fabrication with consumer‑grade ABS [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-19.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1007/s40430-021-03160-9

  • Trabalho de evento-anais periodico

    A novel melt pool mapping technique towards the online monitoring of directed energy deposition operations (2021)

    Ribeiro, Kandice Suane Barros ; Nuñez, Henrique Hiram Libutti; Jones, Jason B; Coates, Peter; Coelho, Reginaldo Teixeira

    Fonte: Procedia Manufacturing. Nome do evento: SME North American Manufacturing Research Conference - NAMRC. Unidades: EESC, ICMC

    Assuntos: MANUFATURA, DESENVOLVIMENTO DE SOFTWARE, BENCHMARKS

    Versão PublicadaAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      RIBEIRO, Kandice Suane Barros et al. A novel melt pool mapping technique towards the online monitoring of directed energy deposition operations. Procedia Manufacturing. Amsterdam: Escola de Engenharia de São Carlos, Universidade de São Paulo. Disponível em: https://doi.org/10.1016/j.promfg.2021.06.058. Acesso em: 19 jul. 2024. , 2021

    • APA

      Ribeiro, K. S. B., Nuñez, H. H. L., Jones, J. B., Coates, P., & Coelho, R. T. (2021). A novel melt pool mapping technique towards the online monitoring of directed energy deposition operations. Procedia Manufacturing. Amsterdam: Escola de Engenharia de São Carlos, Universidade de São Paulo. doi:10.1016/j.promfg.2021.06.058

    • NLM

      Ribeiro KSB, Nuñez HHL, Jones JB, Coates P, Coelho RT. A novel melt pool mapping technique towards the online monitoring of directed energy deposition operations [Internet]. Procedia Manufacturing. 2021 ; 53 576-584.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1016/j.promfg.2021.06.058

    • Vancouver

      Ribeiro KSB, Nuñez HHL, Jones JB, Coates P, Coelho RT. A novel melt pool mapping technique towards the online monitoring of directed energy deposition operations [Internet]. Procedia Manufacturing. 2021 ; 53 576-584.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1016/j.promfg.2021.06.058

  • Dissertação (Mestrado)

    Bounded dynamic programming approach to minimize Makespan for the blocking flow shop problem with sequence dependent setup times constraints (2021)

    Souza, Edson Antonio Gonçalves de; Nagano, Marcelo Seido (Orientador)

    Unidade: EESC

    Assuntos: MANUFATURA, SEQUENCIAÇÃO DA PRODUÇÃO

    Acesso à fonteComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      SOUZA, Edson Antonio Gonçalves de. Bounded dynamic programming approach to minimize Makespan for the blocking flow shop problem with sequence dependent setup times constraints. 2021. Dissertação (Mestrado) – Universidade de São Paulo, São Carlos, 2021. Disponível em: https://www.teses.usp.br/teses/disponiveis/18/18156/tde-19072021-182420/. Acesso em: 19 jul. 2024.

    • APA

      Souza, E. A. G. de. (2021). Bounded dynamic programming approach to minimize Makespan for the blocking flow shop problem with sequence dependent setup times constraints (Dissertação (Mestrado). Universidade de São Paulo, São Carlos. Recuperado de https://www.teses.usp.br/teses/disponiveis/18/18156/tde-19072021-182420/

    • NLM

      Souza EAG de. Bounded dynamic programming approach to minimize Makespan for the blocking flow shop problem with sequence dependent setup times constraints [Internet]. 2021 ;[citado 2024 jul. 19 ] Available from: https://www.teses.usp.br/teses/disponiveis/18/18156/tde-19072021-182420/

    • Vancouver

      Souza EAG de. Bounded dynamic programming approach to minimize Makespan for the blocking flow shop problem with sequence dependent setup times constraints [Internet]. 2021 ;[citado 2024 jul. 19 ] Available from: https://www.teses.usp.br/teses/disponiveis/18/18156/tde-19072021-182420/

  • Artigo de periodico

    Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches (2021)

    Santos, Artur Valadares de Freitas; Silveira, Zilda de Castro

    Fonte: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC

    Assuntos: MANUFATURA, TECNOLOGIAS DA SAÚDE, TERCEIRA DIMENSÃO, ENGENHARIA MECÂNICA

    PrivadoAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      SANTOS, Artur Valadares de Freitas e SILVEIRA, Zilda de Castro. Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-15, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03184-1. Acesso em: 19 jul. 2024.

    • APA

      Santos, A. V. de F., & Silveira, Z. de C. (2021). Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-15. doi:10.1007/s40430-021-03184-1

    • NLM

      Santos AV de F, Silveira Z de C. Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-15.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1007/s40430-021-03184-1

    • Vancouver

      Santos AV de F, Silveira Z de C. Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-15.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1007/s40430-021-03184-1

  • Artigo de periodico

    Effect of microstructure and defect formation on the bending properties of additive manufactured H13 tool steel (2021)

    Oliveira, Adriel P.; Lima, Luiz H. Q. R.; Felipe, Bianca C. A.; Bolfarini, Claudemiro; Coelho, Reginaldo Teixeira ; Gargarella, Piter

    Fonte: Journal of Materials Research and Technology. Unidade: EESC

    Assuntos: TENACIDADE DOS MATERIAIS, MANUFATURA, TERCEIRA DIMENSÃO, ENGENHARIA DE PRODUÇÃO

    Versão PublicadaAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      OLIVEIRA, Adriel P. et al. Effect of microstructure and defect formation on the bending properties of additive manufactured H13 tool steel. Journal of Materials Research and Technology, v. 15, p. 3598-3506, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2021.10.011. Acesso em: 19 jul. 2024.

    • APA

      Oliveira, A. P., Lima, L. H. Q. R., Felipe, B. C. A., Bolfarini, C., Coelho, R. T., & Gargarella, P. (2021). Effect of microstructure and defect formation on the bending properties of additive manufactured H13 tool steel. Journal of Materials Research and Technology, 15, 3598-3506. doi:10.1016/j.jmrt.2021.10.011

    • NLM

      Oliveira AP, Lima LHQR, Felipe BCA, Bolfarini C, Coelho RT, Gargarella P. Effect of microstructure and defect formation on the bending properties of additive manufactured H13 tool steel [Internet]. Journal of Materials Research and Technology. 2021 ; 15 3598-3506.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1016/j.jmrt.2021.10.011

    • Vancouver

      Oliveira AP, Lima LHQR, Felipe BCA, Bolfarini C, Coelho RT, Gargarella P. Effect of microstructure and defect formation on the bending properties of additive manufactured H13 tool steel [Internet]. Journal of Materials Research and Technology. 2021 ; 15 3598-3506.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1016/j.jmrt.2021.10.011

  • Artigo de periodico

    Effect of laser polishing post-processing technique on the roughness and wear resistance of inconel 625 deposited by laser cladding on AISI 304L stainless steel (2021)

    Mariani, Fábio Edson; Ribeiro, Kandice Suane Barros; Lombardi Neto, Amadeu ; Casteletti, Luiz Carlos ; Coelho, Reginaldo Teixeira

    Fonte: Journal of Materials Engineering and Performance. Unidade: EESC

    Assuntos: AÇO INOXIDÁVEL, MANUFATURA, SUPERFÍCIES, ENGENHARIA DE PRODUÇÃO

    PrivadoAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      MARIANI, Fábio Edson et al. Effect of laser polishing post-processing technique on the roughness and wear resistance of inconel 625 deposited by laser cladding on AISI 304L stainless steel. Journal of Materials Engineering and Performance, p. 1-9, 2021Tradução . . Disponível em: https://doi.org/10.1007/s11665-021-05962-3. Acesso em: 19 jul. 2024.

    • APA

      Mariani, F. E., Ribeiro, K. S. B., Lombardi Neto, A., Casteletti, L. C., & Coelho, R. T. (2021). Effect of laser polishing post-processing technique on the roughness and wear resistance of inconel 625 deposited by laser cladding on AISI 304L stainless steel. Journal of Materials Engineering and Performance, 1-9. doi:10.1007/s11665-021-05962-3

    • NLM

      Mariani FE, Ribeiro KSB, Lombardi Neto A, Casteletti LC, Coelho RT. Effect of laser polishing post-processing technique on the roughness and wear resistance of inconel 625 deposited by laser cladding on AISI 304L stainless steel [Internet]. Journal of Materials Engineering and Performance. 2021 ; 1-9.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1007/s11665-021-05962-3

    • Vancouver

      Mariani FE, Ribeiro KSB, Lombardi Neto A, Casteletti LC, Coelho RT. Effect of laser polishing post-processing technique on the roughness and wear resistance of inconel 625 deposited by laser cladding on AISI 304L stainless steel [Internet]. Journal of Materials Engineering and Performance. 2021 ; 1-9.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1007/s11665-021-05962-3

  • Artigo de periodico

    Characterization and optimization of process parameters for directed energy deposition powder-fed laser system (2021)

    Barragan De Los Rios, German Alberto; Rojas Perilla, Daniel Andres; Grass Nuñez, Johan; Mariani, Fábio Edson; Coelho, Reginaldo Teixeira

    Fonte: Journal of Materials Engineering and Performance. Unidade: EESC

    Assuntos: MANUFATURA, LASER

    PrivadoAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      BARRAGAN DE LOS RIOS, German Alberto et al. Characterization and optimization of process parameters for directed energy deposition powder-fed laser system. Journal of Materials Engineering and Performance, p. 1-10, 2021Tradução . . Disponível em: https://doi.org/10.1007/s11665-021-05762-9. Acesso em: 19 jul. 2024.

    • APA

      Barragan De Los Rios, G. A., Rojas Perilla, D. A., Grass Nuñez, J., Mariani, F. E., & Coelho, R. T. (2021). Characterization and optimization of process parameters for directed energy deposition powder-fed laser system. Journal of Materials Engineering and Performance, 1-10. doi:10.1007/s11665-021-05762-9

    • NLM

      Barragan De Los Rios GA, Rojas Perilla DA, Grass Nuñez J, Mariani FE, Coelho RT. Characterization and optimization of process parameters for directed energy deposition powder-fed laser system [Internet]. Journal of Materials Engineering and Performance. 2021 ; 1-10.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1007/s11665-021-05762-9

    • Vancouver

      Barragan De Los Rios GA, Rojas Perilla DA, Grass Nuñez J, Mariani FE, Coelho RT. Characterization and optimization of process parameters for directed energy deposition powder-fed laser system [Internet]. Journal of Materials Engineering and Performance. 2021 ; 1-10.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1007/s11665-021-05762-9

  • Artigo de periodico

    Hybrid manufacturing: a review of the synergy between directed energy deposition and subtractive processes (2020)

    D'Ávila, José Luiz; Inforçatti Neto, Paulo; Noritomi, Pedro Yoshito; Coelho, Reginaldo Teixeira ; Silva, Jorge Vicente Lopes da

    Fonte: International Journal of Advanced Manufacturing Technology. Unidade: EESC

    Assuntos: INDÚSTRIA 4.0, MANUFATURA, ENGENHARIA DE PRODUÇÃO

    PrivadoAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      D'ÁVILA, José Luiz et al. Hybrid manufacturing: a review of the synergy between directed energy deposition and subtractive processes. International Journal of Advanced Manufacturing Technology, v. 110, p. 3377-3390, 2020Tradução . . Disponível em: https://doi.org/10.1007/s00170-020-06062-7. Acesso em: 19 jul. 2024.

    • APA

      D'Ávila, J. L., Inforçatti Neto, P., Noritomi, P. Y., Coelho, R. T., & Silva, J. V. L. da. (2020). Hybrid manufacturing: a review of the synergy between directed energy deposition and subtractive processes. International Journal of Advanced Manufacturing Technology, 110, 3377-3390. doi:10.1007/s00170-020-06062-7

    • NLM

      D'Ávila JL, Inforçatti Neto P, Noritomi PY, Coelho RT, Silva JVL da. Hybrid manufacturing: a review of the synergy between directed energy deposition and subtractive processes [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ; 110 3377-3390.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1007/s00170-020-06062-7

    • Vancouver

      D'Ávila JL, Inforçatti Neto P, Noritomi PY, Coelho RT, Silva JVL da. Hybrid manufacturing: a review of the synergy between directed energy deposition and subtractive processes [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ; 110 3377-3390.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1007/s00170-020-06062-7

  • Artigo de periodico

    Life cycle assessment of a hot-pressing machine to manufacture particleboards: hotspots, environmental indicators, and solutions (2020)

    Silva, Diogo Aparecido Lopes; Firmino, Alessandro Silveira; Ferro, Fabiane Salles; Christoforo, André Luis ; Leite, Florence Rezende; Lahr, Francisco Antonio Rocco ; Kellens, Karel

    Fonte: The International Journal of Life Cycle Assessment. Unidade: EESC

    Assuntos: PAINÉIS, CICLO DE VIDA, MANUFATURA, ESTRUTURAS

    PrivadoAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      SILVA, Diogo Aparecido Lopes et al. Life cycle assessment of a hot-pressing machine to manufacture particleboards: hotspots, environmental indicators, and solutions. The International Journal of Life Cycle Assessment, v. 25, p. 1059-1077, 2020Tradução . . Disponível em: https://doi.org/10.1007/s11367-020-01755-3. Acesso em: 19 jul. 2024.

    • APA

      Silva, D. A. L., Firmino, A. S., Ferro, F. S., Christoforo, A. L., Leite, F. R., Lahr, F. A. R., & Kellens, K. (2020). Life cycle assessment of a hot-pressing machine to manufacture particleboards: hotspots, environmental indicators, and solutions. The International Journal of Life Cycle Assessment, 25, 1059-1077. doi:10.1007/s11367-020-01755-3

    • NLM

      Silva DAL, Firmino AS, Ferro FS, Christoforo AL, Leite FR, Lahr FAR, Kellens K. Life cycle assessment of a hot-pressing machine to manufacture particleboards: hotspots, environmental indicators, and solutions [Internet]. The International Journal of Life Cycle Assessment. 2020 ; 25 1059-1077.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1007/s11367-020-01755-3

    • Vancouver

      Silva DAL, Firmino AS, Ferro FS, Christoforo AL, Leite FR, Lahr FAR, Kellens K. Life cycle assessment of a hot-pressing machine to manufacture particleboards: hotspots, environmental indicators, and solutions [Internet]. The International Journal of Life Cycle Assessment. 2020 ; 25 1059-1077.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1007/s11367-020-01755-3

  • Artigo de periodico

    Failure monitoring and recovery system during manufacturing process (2020)

    Parkesian, P.; Watanabe, F.; Cunha, Daniel Aparecido Lopes Vieira da; Branciforti, Márcia Cristina ; Aroca, R.

    Fonte: IEEE Latin America Transactions. Unidade: EESC

    Assuntos: IMAGEM 3D, MANUFATURA, INTERNET DAS COISAS, IMPRESSÃO, MATERIAIS

    PrivadoAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      PARKESIAN, P. et al. Failure monitoring and recovery system during manufacturing process. IEEE Latin America Transactions, v. 18, n. 2, p. 407-413, 2020Tradução . . Disponível em: https://doi.org/10.1109/TLA.2020.9085297. Acesso em: 19 jul. 2024.

    • APA

      Parkesian, P., Watanabe, F., Cunha, D. A. L. V. da, Branciforti, M. C., & Aroca, R. (2020). Failure monitoring and recovery system during manufacturing process. IEEE Latin America Transactions, 18( 2), 407-413. doi:10.1109/TLA.2020.9085297

    • NLM

      Parkesian P, Watanabe F, Cunha DALV da, Branciforti MC, Aroca R. Failure monitoring and recovery system during manufacturing process [Internet]. IEEE Latin America Transactions. 2020 ; 18( 2): 407-413.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1109/TLA.2020.9085297

    • Vancouver

      Parkesian P, Watanabe F, Cunha DALV da, Branciforti MC, Aroca R. Failure monitoring and recovery system during manufacturing process [Internet]. IEEE Latin America Transactions. 2020 ; 18( 2): 407-413.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1109/TLA.2020.9085297

  • Trabalho de evento-anais periodico

    An initial investigation of tungsten inert gas (TIG) torch as heat source for additive manufacturing (AM) process (2020)

    Moreira, Alcindo Fernando; Ribeiro, Kandice Suane Barros; Mariani, Fábio Edson; Coelho, Reginaldo Teixeira

    Fonte: Procedia Manufacturing. Nome do evento: North American Manufacturing Research Conference - NAMRC. Unidade: EESC

    Assuntos: USINAGEM, MANUFATURA, SOLDAGEM, ENGENHARIA DE PRODUÇÃO

    PrivadoAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      MOREIRA, Alcindo Fernando et al. An initial investigation of tungsten inert gas (TIG) torch as heat source for additive manufacturing (AM) process. Procedia Manufacturing. Amsterdam, Netherlands: Elsevier. Disponível em: https://doi.org/10.1016/j.promfg.2020.05.159. Acesso em: 19 jul. 2024. , 2020

    • APA

      Moreira, A. F., Ribeiro, K. S. B., Mariani, F. E., & Coelho, R. T. (2020). An initial investigation of tungsten inert gas (TIG) torch as heat source for additive manufacturing (AM) process. Procedia Manufacturing. Amsterdam, Netherlands: Elsevier. doi:10.1016/j.promfg.2020.05.159

    • NLM

      Moreira AF, Ribeiro KSB, Mariani FE, Coelho RT. An initial investigation of tungsten inert gas (TIG) torch as heat source for additive manufacturing (AM) process [Internet]. Procedia Manufacturing. 2020 ; 48 671-677.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1016/j.promfg.2020.05.159

    • Vancouver

      Moreira AF, Ribeiro KSB, Mariani FE, Coelho RT. An initial investigation of tungsten inert gas (TIG) torch as heat source for additive manufacturing (AM) process [Internet]. Procedia Manufacturing. 2020 ; 48 671-677.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1016/j.promfg.2020.05.159

  • Artigo de periodico

    An overview of laser engineered net shaping of ceramics (2020)

    Camargo, Italo Leite de; Lovo, João Fiore Parreira; Erbereli, Rogério; Coelho, Reginaldo Teixeira ; Silva, Iris Bento da; Fortulan, Carlos Alberto

    Fonte: Revista Matéria. Unidade: EESC

    Assuntos: MANUFATURA, IMAGEM 3D, IMPRESSÃO, CERÂMICA, ENGENHARIA MECÂNICA

    Versão PublicadaAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      CAMARGO, Italo Leite de et al. An overview of laser engineered net shaping of ceramics. Revista Matéria, v. 25, n. 1, p. [1-11], 2020Tradução . . Disponível em: https://doi.org/10.1590/S1517-707620200001.0916. Acesso em: 19 jul. 2024.

    • APA

      Camargo, I. L. de, Lovo, J. F. P., Erbereli, R., Coelho, R. T., Silva, I. B. da, & Fortulan, C. A. (2020). An overview of laser engineered net shaping of ceramics. Revista Matéria, 25( 1), [1-11]. doi:10.1590/S1517-707620200001.0916

    • NLM

      Camargo IL de, Lovo JFP, Erbereli R, Coelho RT, Silva IB da, Fortulan CA. An overview of laser engineered net shaping of ceramics [Internet]. Revista Matéria. 2020 ; 25( 1): [1-11].[citado 2024 jul. 19 ] Available from: https://doi.org/10.1590/S1517-707620200001.0916

    • Vancouver

      Camargo IL de, Lovo JFP, Erbereli R, Coelho RT, Silva IB da, Fortulan CA. An overview of laser engineered net shaping of ceramics [Internet]. Revista Matéria. 2020 ; 25( 1): [1-11].[citado 2024 jul. 19 ] Available from: https://doi.org/10.1590/S1517-707620200001.0916

  • Parte de monografia/livro

    The influence of economic context on the relationship between manufacturing strategy, practices and performance (2020)

    Gambi, Lillian do Nascimento; Boer, Harry; Boer, Henrike Engele Elisabeth; Gerólamo, Mateus Cecílio

    Fonte: Industrial Engineering and Operations Management. Nome do evento: International Joint Conference on Industrial Engineering and Operations Management - IJCIEOM. Unidade: EESC

    Assuntos: MANUFATURA, ENGENHARIA MECÂNICA, TOMADA DE DECISÃO

    Versão PublicadaAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      GAMBI, Lillian do Nascimento et al. The influence of economic context on the relationship between manufacturing strategy, practices and performance. Industrial Engineering and Operations Management. Tradução . Cham, Switzerland: Springer, 2020. p. 405-415. Disponível em: https://doi.org/10.1007/978-3-030-56920-4_33. Acesso em: 19 jul. 2024.

    • APA

      Gambi, L. do N., Boer, H., Boer, H. E. E., & Gerólamo, M. C. (2020). The influence of economic context on the relationship between manufacturing strategy, practices and performance. In Industrial Engineering and Operations Management (p. 405-415). Cham, Switzerland: Springer. doi:10.1007/978-3-030-56920-4_33

    • NLM

      Gambi L do N, Boer H, Boer HEE, Gerólamo MC. The influence of economic context on the relationship between manufacturing strategy, practices and performance [Internet]. In: Industrial Engineering and Operations Management. Cham, Switzerland: Springer; 2020. p. 405-415.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1007/978-3-030-56920-4_33

    • Vancouver

      Gambi L do N, Boer H, Boer HEE, Gerólamo MC. The influence of economic context on the relationship between manufacturing strategy, practices and performance [Internet]. In: Industrial Engineering and Operations Management. Cham, Switzerland: Springer; 2020. p. 405-415.[citado 2024 jul. 19 ] Available from: https://doi.org/10.1007/978-3-030-56920-4_33

1 - 20 (142 registros)

Biblioteca Digital de Produção Intelectual da Universidade de São Paulo     2012 - 2024