ReP USP - Resultado da busca

Trabalho de evento
Matrix method for a stability analysis of non-newtonian fluid flow (2021)
Furlan, Laison Junio da Silva ; Araujo, Matheus Tozo de ; Souza, Leandro Franco de ; Mendonça, Marcio Teixeira de ; Brandi, Analice Costacurta
Source: Proceedings. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: ICMC
Subjects: FLUXO DOS FLUÍDOS, VALORES PRÓPRIOS, MÉTODOS DE CHEBYSHEV, ESCOAMENTO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FURLAN, Laison Junio da Silva et al. Matrix method for a stability analysis of non-newtonian fluid flow. 2021, Anais.. Rio de Janeiro: ABCM, 2021. Disponível em: https://doi.org/10.26678/ABCM.COBEM2021.COB2021-1376. Acesso em: 07 nov. 2024.
APA
Furlan, L. J. da S., Araujo, M. T. de, Souza, L. F. de, Mendonça, M. T. de, & Brandi, A. C. (2021). Matrix method for a stability analysis of non-newtonian fluid flow. In Proceedings. Rio de Janeiro: ABCM. doi:10.26678/ABCM.COBEM2021.COB2021-1376
NLM
Furlan LJ da S, Araujo MT de, Souza LF de, Mendonça MT de, Brandi AC. Matrix method for a stability analysis of non-newtonian fluid flow [Internet]. Proceedings. 2021 ;[citado 2024 nov. 07 ] Available from: https://doi.org/10.26678/ABCM.COBEM2021.COB2021-1376
Vancouver
Furlan LJ da S, Araujo MT de, Souza LF de, Mendonça MT de, Brandi AC. Matrix method for a stability analysis of non-newtonian fluid flow [Internet]. Proceedings. 2021 ;[citado 2024 nov. 07 ] Available from: https://doi.org/10.26678/ABCM.COBEM2021.COB2021-1376
Trabalho de evento
Flow boiling of R1336mzz(Z) in open microchannels with diverging manifold (2021)
Moreira, Débora Carneiro; Nascimento Junior, Valter Salles do; Ribatski, Gherhardt ; Kandlikar, Satish G
Source: Proceedings. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: TRANSFERÊNCIA DE CALOR, ESCOAMENTO BIFÁSICO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOREIRA, Débora Carneiro et al. Flow boiling of R1336mzz(Z) in open microchannels with diverging manifold. 2021, Anais.. Rio de Janeiro, RJ: ABCM, 2021. Disponível em: https://repositorio.usp.br/directbitstream/ae51f9a9-52ac-4027-bf7c-cd9370a709ec/PROD_26256_SYSNO_3153030.pdf. Acesso em: 07 nov. 2024.
APA
Moreira, D. C., Nascimento Junior, V. S. do, Ribatski, G., & Kandlikar, S. G. (2021). Flow boiling of R1336mzz(Z) in open microchannels with diverging manifold. In Proceedings. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/ae51f9a9-52ac-4027-bf7c-cd9370a709ec/PROD_26256_SYSNO_3153030.pdf
NLM
Moreira DC, Nascimento Junior VS do, Ribatski G, Kandlikar SG. Flow boiling of R1336mzz(Z) in open microchannels with diverging manifold [Internet]. Proceedings. 2021 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/ae51f9a9-52ac-4027-bf7c-cd9370a709ec/PROD_26256_SYSNO_3153030.pdf
Vancouver
Moreira DC, Nascimento Junior VS do, Ribatski G, Kandlikar SG. Flow boiling of R1336mzz(Z) in open microchannels with diverging manifold [Internet]. Proceedings. 2021 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/ae51f9a9-52ac-4027-bf7c-cd9370a709ec/PROD_26256_SYSNO_3153030.pdf
Trabalho de evento
Design development of a ceramic DLP 3D printer interating QFD and triz (2021)
Camargo, Italo Leite de ; Silveira, Zilda de Castro ; Erbereli, Rogério ; Lovo, João Fiore Parreira ; Fortulan, Carlos Alberto
Source: Proceedings. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: MANUFATURA ADITIVA, CERÂMICA, DESIGN DE PRODUTOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAMARGO, Italo Leite de et al. Design development of a ceramic DLP 3D printer interating QFD and triz. 2021, Anais.. Rio de Janeiro, RJ: ABCM, 2021. Disponível em: https://repositorio.usp.br/directbitstream/dff664bd-ef75-49f6-9b00-f05206686ee9/OK___trabalho%2001%20-%20Design%20development%20ceramic%20DLP%203D%20Printer%20integrating%20QFD%20and%20TRIZ%20%28COBEM%202021%29_removed.pdf. Acesso em: 07 nov. 2024.
APA
Camargo, I. L. de, Silveira, Z. de C., Erbereli, R., Lovo, J. F. P., & Fortulan, C. A. (2021). Design development of a ceramic DLP 3D printer interating QFD and triz. In Proceedings. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/dff664bd-ef75-49f6-9b00-f05206686ee9/OK___trabalho%2001%20-%20Design%20development%20ceramic%20DLP%203D%20Printer%20integrating%20QFD%20and%20TRIZ%20%28COBEM%202021%29_removed.pdf
NLM
Camargo IL de, Silveira Z de C, Erbereli R, Lovo JFP, Fortulan CA. Design development of a ceramic DLP 3D printer interating QFD and triz [Internet]. Proceedings. 2021 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/dff664bd-ef75-49f6-9b00-f05206686ee9/OK___trabalho%2001%20-%20Design%20development%20ceramic%20DLP%203D%20Printer%20integrating%20QFD%20and%20TRIZ%20%28COBEM%202021%29_removed.pdf
Vancouver
Camargo IL de, Silveira Z de C, Erbereli R, Lovo JFP, Fortulan CA. Design development of a ceramic DLP 3D printer interating QFD and triz [Internet]. Proceedings. 2021 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/dff664bd-ef75-49f6-9b00-f05206686ee9/OK___trabalho%2001%20-%20Design%20development%20ceramic%20DLP%203D%20Printer%20integrating%20QFD%20and%20TRIZ%20%28COBEM%202021%29_removed.pdf
Trabalho de evento
DNS of non-newtonian Giesekus fluid flow stability (2017)
Brandi, Analice Costacurta; Furlan, Laison Junio da Silva; Mendonça, Márcio Teixeira de; Silva, Arianne Alves da; Araujo, Matheus Tozo de; Souza, Leandro Franco de
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: ICMC
Subjects: MATEMÁTICA APLICADA, MECÂNICA DOS FLUÍDOS COMPUTACIONAL, ANÁLISE NUMÉRICA, ESCOAMENTO MULTIFÁSICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BRANDI, Analice Costacurta et al. DNS of non-newtonian Giesekus fluid flow stability. 2017, Anais.. Rio de Janeiro: Associação Brasileira de Engenharia e Ciências Mecânicas – ABCM, 2017. . Acesso em: 07 nov. 2024.
APA
Brandi, A. C., Furlan, L. J. da S., Mendonça, M. T. de, Silva, A. A. da, Araujo, M. T. de, & Souza, L. F. de. (2017). DNS of non-newtonian Giesekus fluid flow stability. In Anais. Rio de Janeiro: Associação Brasileira de Engenharia e Ciências Mecânicas – ABCM.
NLM
Brandi AC, Furlan LJ da S, Mendonça MT de, Silva AA da, Araujo MT de, Souza LF de. DNS of non-newtonian Giesekus fluid flow stability. Anais. 2017 ;[citado 2024 nov. 07 ]
Vancouver
Brandi AC, Furlan LJ da S, Mendonça MT de, Silva AA da, Araujo MT de, Souza LF de. DNS of non-newtonian Giesekus fluid flow stability. Anais. 2017 ;[citado 2024 nov. 07 ]
Trabalho de evento
3D DLP additive manufacturing: printer and validation (2017)
Olmos, Liliane Guardia; Lovo, João Fiore Parreira ; Camargo, Italo Leite de; Consonni, Cintia Rejane; Fortulan, Carlos Alberto
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: IMAGEM 3D, MANUFATURA, IMPRESSÃO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLMOS, Liliane Guardia et al. 3D DLP additive manufacturing: printer and validation. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/1f440234-1066-434f-b34c-1957ffe4efd7/Anais_15-%203D%20DLP%20additive%20manufacturing%20-%20printer%20and%20validation.pdf. Acesso em: 07 nov. 2024.
APA
Olmos, L. G., Lovo, J. F. P., Camargo, I. L. de, Consonni, C. R., & Fortulan, C. A. (2017). 3D DLP additive manufacturing: printer and validation. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/1f440234-1066-434f-b34c-1957ffe4efd7/Anais_15-%203D%20DLP%20additive%20manufacturing%20-%20printer%20and%20validation.pdf
NLM
Olmos LG, Lovo JFP, Camargo IL de, Consonni CR, Fortulan CA. 3D DLP additive manufacturing: printer and validation [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/1f440234-1066-434f-b34c-1957ffe4efd7/Anais_15-%203D%20DLP%20additive%20manufacturing%20-%20printer%20and%20validation.pdf
Vancouver
Olmos LG, Lovo JFP, Camargo IL de, Consonni CR, Fortulan CA. 3D DLP additive manufacturing: printer and validation [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/1f440234-1066-434f-b34c-1957ffe4efd7/Anais_15-%203D%20DLP%20additive%20manufacturing%20-%20printer%20and%20validation.pdf
Trabalho de evento
Design of planetary mill with friction wheels (2017)
Camargo, Italo Leite de; Lovo, João Fiore Parreira ; Fortulan, Carlos Alberto
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: ENGENHARIA MECÂNICA, RETIFICAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAMARGO, Italo Leite de e LOVO, João Fiore Parreira e FORTULAN, Carlos Alberto. Design of planetary mill with friction wheels. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/7c6c6ed0-2933-4b38-a8fe-b361755ee90a/Anais_14-%20Design%20of%20planetary%20mill%20with%20friction%20wheels.pdf. Acesso em: 07 nov. 2024.
APA
Camargo, I. L. de, Lovo, J. F. P., & Fortulan, C. A. (2017). Design of planetary mill with friction wheels. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/7c6c6ed0-2933-4b38-a8fe-b361755ee90a/Anais_14-%20Design%20of%20planetary%20mill%20with%20friction%20wheels.pdf
NLM
Camargo IL de, Lovo JFP, Fortulan CA. Design of planetary mill with friction wheels [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/7c6c6ed0-2933-4b38-a8fe-b361755ee90a/Anais_14-%20Design%20of%20planetary%20mill%20with%20friction%20wheels.pdf
Vancouver
Camargo IL de, Lovo JFP, Fortulan CA. Design of planetary mill with friction wheels [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/7c6c6ed0-2933-4b38-a8fe-b361755ee90a/Anais_14-%20Design%20of%20planetary%20mill%20with%20friction%20wheels.pdf
Trabalho de evento
Application of Galerkin method to the solution of aerodynamic models based on the lifting-line theory (2017)
Liorbano, Felipe Fernandes; Pelegrineli, Luis Antonio Vieira; Angélico, Ricardo Afonso
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: AERODINÂMICA DE AERONAVES, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LIORBANO, Felipe Fernandes e PELEGRINELI, Luis Antonio Vieira e ANGÉLICO, Ricardo Afonso. Application of Galerkin method to the solution of aerodynamic models based on the lifting-line theory. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/2e83d21b-13bd-4fb4-8b76-02198c7ab7eb/trabalho%2007%20-%20%20Application%20of%20Galerkin%20method%20to%20the%20solution%20of%20aerodynamic%20models%20based%20on%20the%20lifting-line%20theory%20%28COBEM%202017%29.pdf. Acesso em: 07 nov. 2024.
APA
Liorbano, F. F., Pelegrineli, L. A. V., & Angélico, R. A. (2017). Application of Galerkin method to the solution of aerodynamic models based on the lifting-line theory. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/2e83d21b-13bd-4fb4-8b76-02198c7ab7eb/trabalho%2007%20-%20%20Application%20of%20Galerkin%20method%20to%20the%20solution%20of%20aerodynamic%20models%20based%20on%20the%20lifting-line%20theory%20%28COBEM%202017%29.pdf
NLM
Liorbano FF, Pelegrineli LAV, Angélico RA. Application of Galerkin method to the solution of aerodynamic models based on the lifting-line theory [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/2e83d21b-13bd-4fb4-8b76-02198c7ab7eb/trabalho%2007%20-%20%20Application%20of%20Galerkin%20method%20to%20the%20solution%20of%20aerodynamic%20models%20based%20on%20the%20lifting-line%20theory%20%28COBEM%202017%29.pdf
Vancouver
Liorbano FF, Pelegrineli LAV, Angélico RA. Application of Galerkin method to the solution of aerodynamic models based on the lifting-line theory [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/2e83d21b-13bd-4fb4-8b76-02198c7ab7eb/trabalho%2007%20-%20%20Application%20of%20Galerkin%20method%20to%20the%20solution%20of%20aerodynamic%20models%20based%20on%20the%20lifting-line%20theory%20%28COBEM%202017%29.pdf
Trabalho de evento
Experimental study of penetration depth produced by a plunging jet system (2017)
Miranda Lugo, Pedro José; Sansão, Douglas Ricardo; Ortiz Vidal, Luis Enrique; Hernandez Rodriguez, Oscar Mauricio
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: PROCESSAMENTO DE IMAGENS, ESCOAMENTO BIFÁSICO, DINÂMICA DOS FLUÍDOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MIRANDA LUGO, Pedro José et al. Experimental study of penetration depth produced by a plunging jet system. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/2e628142-71e7-46fb-8e2a-2f188afe3aea/OK___trabalho%2020%20-%20Experimental%20study%20of%20penetration%20depth%20produced%20by%20a%20plunging%20jet%20system%20%28COBEM%202017%29.pdf. Acesso em: 07 nov. 2024.
APA
Miranda Lugo, P. J., Sansão, D. R., Ortiz Vidal, L. E., & Hernandez Rodriguez, O. M. (2017). Experimental study of penetration depth produced by a plunging jet system. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/2e628142-71e7-46fb-8e2a-2f188afe3aea/OK___trabalho%2020%20-%20Experimental%20study%20of%20penetration%20depth%20produced%20by%20a%20plunging%20jet%20system%20%28COBEM%202017%29.pdf
NLM
Miranda Lugo PJ, Sansão DR, Ortiz Vidal LE, Hernandez Rodriguez OM. Experimental study of penetration depth produced by a plunging jet system [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/2e628142-71e7-46fb-8e2a-2f188afe3aea/OK___trabalho%2020%20-%20Experimental%20study%20of%20penetration%20depth%20produced%20by%20a%20plunging%20jet%20system%20%28COBEM%202017%29.pdf
Vancouver
Miranda Lugo PJ, Sansão DR, Ortiz Vidal LE, Hernandez Rodriguez OM. Experimental study of penetration depth produced by a plunging jet system [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/2e628142-71e7-46fb-8e2a-2f188afe3aea/OK___trabalho%2020%20-%20Experimental%20study%20of%20penetration%20depth%20produced%20by%20a%20plunging%20jet%20system%20%28COBEM%202017%29.pdf
Trabalho de evento
Modeling and control of a macro-micro system using interaction controllers (2017)
Lahr, Gustavo José Giardini; Costa, Lucas Fideles; Cunha, Thiago Boaventura; Caurin, Glauco Augusto de Paula
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: ROBÔS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LAHR, Gustavo José Giardini et al. Modeling and control of a macro-micro system using interaction controllers. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/11cb6355-706e-45cb-b984-62d156895fe7/OK___trabalho%2009%20-%20Modelling%20and%20control%20of%20a%20macro-micro%20system%20using%20interaction%20controllers%20%28COBEM%202017%29%20%281%29.pdf. Acesso em: 07 nov. 2024.
APA
Lahr, G. J. G., Costa, L. F., Cunha, T. B., & Caurin, G. A. de P. (2017). Modeling and control of a macro-micro system using interaction controllers. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/11cb6355-706e-45cb-b984-62d156895fe7/OK___trabalho%2009%20-%20Modelling%20and%20control%20of%20a%20macro-micro%20system%20using%20interaction%20controllers%20%28COBEM%202017%29%20%281%29.pdf
NLM
Lahr GJG, Costa LF, Cunha TB, Caurin GA de P. Modeling and control of a macro-micro system using interaction controllers [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/11cb6355-706e-45cb-b984-62d156895fe7/OK___trabalho%2009%20-%20Modelling%20and%20control%20of%20a%20macro-micro%20system%20using%20interaction%20controllers%20%28COBEM%202017%29%20%281%29.pdf
Vancouver
Lahr GJG, Costa LF, Cunha TB, Caurin GA de P. Modeling and control of a macro-micro system using interaction controllers [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/11cb6355-706e-45cb-b984-62d156895fe7/OK___trabalho%2009%20-%20Modelling%20and%20control%20of%20a%20macro-micro%20system%20using%20interaction%20controllers%20%28COBEM%202017%29%20%281%29.pdf
Trabalho de evento
Slat noise: experimental and numerical efforts at USP-São Carlos (2017)
Souza, Daniel Sampaio; Pagani Júnior, Carlos do Carmo; Amaral, Filipe Ramos do; Himeno, Fernando Henrique Tadashi; Rodriguez, Daniel; Medeiros, Marcello Augusto Faraco de
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: TÚNEIS DE VENTO, SLATS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUZA, Daniel Sampaio et al. Slat noise: experimental and numerical efforts at USP-São Carlos. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/63ab2f29-315e-4190-8228-e7a09259f2ef/trabalho%2015%20-%20Slat%20noise%20Experimental%20and%20numerical%20efforts%20at%20USP-S%C3%A3o%20Carlos%20%28COBEM%202017%29.pdf. Acesso em: 07 nov. 2024.
APA
Souza, D. S., Pagani Júnior, C. do C., Amaral, F. R. do, Himeno, F. H. T., Rodriguez, D., & Medeiros, M. A. F. de. (2017). Slat noise: experimental and numerical efforts at USP-São Carlos. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/63ab2f29-315e-4190-8228-e7a09259f2ef/trabalho%2015%20-%20Slat%20noise%20Experimental%20and%20numerical%20efforts%20at%20USP-S%C3%A3o%20Carlos%20%28COBEM%202017%29.pdf
NLM
Souza DS, Pagani Júnior C do C, Amaral FR do, Himeno FHT, Rodriguez D, Medeiros MAF de. Slat noise: experimental and numerical efforts at USP-São Carlos [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/63ab2f29-315e-4190-8228-e7a09259f2ef/trabalho%2015%20-%20Slat%20noise%20Experimental%20and%20numerical%20efforts%20at%20USP-S%C3%A3o%20Carlos%20%28COBEM%202017%29.pdf
Vancouver
Souza DS, Pagani Júnior C do C, Amaral FR do, Himeno FHT, Rodriguez D, Medeiros MAF de. Slat noise: experimental and numerical efforts at USP-São Carlos [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/63ab2f29-315e-4190-8228-e7a09259f2ef/trabalho%2015%20-%20Slat%20noise%20Experimental%20and%20numerical%20efforts%20at%20USP-S%C3%A3o%20Carlos%20%28COBEM%202017%29.pdf
Trabalho de evento
Lattice Boltzmann simulation of a droplet interaction with a solid surface (2017)
Ribeiro, Gustavo dos Santos; Guzella, Matheus dos Santos; Cabezas Gómez, Luben
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: ESCOAMENTO BIFÁSICO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Gustavo dos Santos e GUZELLA, Matheus dos Santos e CABEZAS GÓMEZ, Luben. Lattice Boltzmann simulation of a droplet interaction with a solid surface. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/6ba335fd-8630-4bf1-a7b4-9ce14f828d2a/OK___trabalho%2027%20-%20Lattice%20Boltzmann%20simulation%20of%20a%20droplet%20interaction%20with%20a%20solid%20surface_removed.pdf. Acesso em: 07 nov. 2024.
APA
Ribeiro, G. dos S., Guzella, M. dos S., & Cabezas Gómez, L. (2017). Lattice Boltzmann simulation of a droplet interaction with a solid surface. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/6ba335fd-8630-4bf1-a7b4-9ce14f828d2a/OK___trabalho%2027%20-%20Lattice%20Boltzmann%20simulation%20of%20a%20droplet%20interaction%20with%20a%20solid%20surface_removed.pdf
NLM
Ribeiro G dos S, Guzella M dos S, Cabezas Gómez L. Lattice Boltzmann simulation of a droplet interaction with a solid surface [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/6ba335fd-8630-4bf1-a7b4-9ce14f828d2a/OK___trabalho%2027%20-%20Lattice%20Boltzmann%20simulation%20of%20a%20droplet%20interaction%20with%20a%20solid%20surface_removed.pdf
Vancouver
Ribeiro G dos S, Guzella M dos S, Cabezas Gómez L. Lattice Boltzmann simulation of a droplet interaction with a solid surface [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/6ba335fd-8630-4bf1-a7b4-9ce14f828d2a/OK___trabalho%2027%20-%20Lattice%20Boltzmann%20simulation%20of%20a%20droplet%20interaction%20with%20a%20solid%20surface_removed.pdf
Trabalho de evento
Fully submerged point absorber in Santa Catarina, Brazil: a feasibility study (2017)
Silva, Leandro Souza Pinheiro da; Tancredi, Thiago Pontin; Sergiienko, Nataliia; Morishita, Helio Mitio
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EP
Subjects: FONTES ALTERNATIVAS DE ENERGIA, GERAÇÃO DE ENERGIA ELÉTRICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Leandro Souza Pinheiro da et al. Fully submerged point absorber in Santa Catarina, Brazil: a feasibility study. 2017, Anais.. Rio de Janeiro: Associação Brasileira de Engenharia e Ciências Mecânicas – ABCM, 2017. Disponível em: https://doi.org/10.26678/ABCM.COBEM2017.COB17-1253. Acesso em: 07 nov. 2024.
APA
Silva, L. S. P. da, Tancredi, T. P., Sergiienko, N., & Morishita, H. M. (2017). Fully submerged point absorber in Santa Catarina, Brazil: a feasibility study. In Anais. Rio de Janeiro: Associação Brasileira de Engenharia e Ciências Mecânicas – ABCM. doi:10.26678/ABCM.COBEM2017.COB17-1253
NLM
Silva LSP da, Tancredi TP, Sergiienko N, Morishita HM. Fully submerged point absorber in Santa Catarina, Brazil: a feasibility study [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://doi.org/10.26678/ABCM.COBEM2017.COB17-1253
Vancouver
Silva LSP da, Tancredi TP, Sergiienko N, Morishita HM. Fully submerged point absorber in Santa Catarina, Brazil: a feasibility study [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://doi.org/10.26678/ABCM.COBEM2017.COB17-1253
Trabalho de evento
Numerical investigation at low Reynolds numbers of the galloping instability of a circular cylinder with a splitter plate employing a spectral/HP finite element method (2017)
Basso, Robin Lucas Guillaume; Assi, Gustavo Roque da Silva ; Orselli, Reinaldo Marcondes ; Saltara, Fábio
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EP
Subjects: ESCOAMENTO MONOFÁSICO, DINÂMICA DOS FLUÍDOS, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BASSO, Robin Lucas Guillaume et al. Numerical investigation at low Reynolds numbers of the galloping instability of a circular cylinder with a splitter plate employing a spectral/HP finite element method. 2017, Anais.. Rio de Janeiro: Associação Brasileira de Engenharia e Ciências Mecânicas - ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/617f1f5b-2bf3-474b-9409-55cdfaddf61a/Saltara-2017-NUMERICAL%20INVESTIGATION%20AT%20LOW%20REYNOLDS%20NUMBERS%20-%20Cobem.pdf. Acesso em: 07 nov. 2024.
APA
Basso, R. L. G., Assi, G. R. da S., Orselli, R. M., & Saltara, F. (2017). Numerical investigation at low Reynolds numbers of the galloping instability of a circular cylinder with a splitter plate employing a spectral/HP finite element method. In Anais. Rio de Janeiro: Associação Brasileira de Engenharia e Ciências Mecânicas - ABCM. Recuperado de https://repositorio.usp.br/directbitstream/617f1f5b-2bf3-474b-9409-55cdfaddf61a/Saltara-2017-NUMERICAL%20INVESTIGATION%20AT%20LOW%20REYNOLDS%20NUMBERS%20-%20Cobem.pdf
NLM
Basso RLG, Assi GR da S, Orselli RM, Saltara F. Numerical investigation at low Reynolds numbers of the galloping instability of a circular cylinder with a splitter plate employing a spectral/HP finite element method [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/617f1f5b-2bf3-474b-9409-55cdfaddf61a/Saltara-2017-NUMERICAL%20INVESTIGATION%20AT%20LOW%20REYNOLDS%20NUMBERS%20-%20Cobem.pdf
Vancouver
Basso RLG, Assi GR da S, Orselli RM, Saltara F. Numerical investigation at low Reynolds numbers of the galloping instability of a circular cylinder with a splitter plate employing a spectral/HP finite element method [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/617f1f5b-2bf3-474b-9409-55cdfaddf61a/Saltara-2017-NUMERICAL%20INVESTIGATION%20AT%20LOW%20REYNOLDS%20NUMBERS%20-%20Cobem.pdf
Trabalho de evento
A new approach to randomly generate porous media to perform CFD simulations (2017)
Ansoni, Jonas Laerte; Souza, Leandro Franco de ; Castelo, Antonio ; Afonso, Alexandre Miguel
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: ICMC
Subjects: MATEMÁTICA APLICADA, MECÂNICA DOS FLUÍDOS COMPUTACIONAL, ANÁLISE NUMÉRICA, ESCOAMENTO MULTIFÁSICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ANSONI, Jonas Laerte et al. A new approach to randomly generate porous media to perform CFD simulations. 2017, Anais.. Rio de Janeiro: Associação Brasileira de Engenharia e Ciências Mecânicas – ABCM, 2017. . Acesso em: 07 nov. 2024.
APA
Ansoni, J. L., Souza, L. F. de, Castelo, A., & Afonso, A. M. (2017). A new approach to randomly generate porous media to perform CFD simulations. In Anais. Rio de Janeiro: Associação Brasileira de Engenharia e Ciências Mecânicas – ABCM.
NLM
Ansoni JL, Souza LF de, Castelo A, Afonso AM. A new approach to randomly generate porous media to perform CFD simulations. Anais. 2017 ;[citado 2024 nov. 07 ]
Vancouver
Ansoni JL, Souza LF de, Castelo A, Afonso AM. A new approach to randomly generate porous media to perform CFD simulations. Anais. 2017 ;[citado 2024 nov. 07 ]
Trabalho de evento
Görtler instability study on the pressure surface of a turbine blade (2017)
Marques, L. F.; Rogenski, J. K.; Souza, Leandro Franco de
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: ICMC
Subjects: MATEMÁTICA APLICADA, MECÂNICA DOS FLUÍDOS COMPUTACIONAL, ANÁLISE NUMÉRICA, ESCOAMENTO MULTIFÁSICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARQUES, L. F. e ROGENSKI, J. K. e SOUZA, Leandro Franco de. Görtler instability study on the pressure surface of a turbine blade. 2017, Anais.. Rio de Janeiro: Associação Brasileira de Engenharia e Ciências Mecânicas – ABCM, 2017. . Acesso em: 07 nov. 2024.
APA
Marques, L. F., Rogenski, J. K., & Souza, L. F. de. (2017). Görtler instability study on the pressure surface of a turbine blade. In Anais. Rio de Janeiro: Associação Brasileira de Engenharia e Ciências Mecânicas – ABCM.
NLM
Marques LF, Rogenski JK, Souza LF de. Görtler instability study on the pressure surface of a turbine blade. Anais. 2017 ;[citado 2024 nov. 07 ]
Vancouver
Marques LF, Rogenski JK, Souza LF de. Görtler instability study on the pressure surface of a turbine blade. Anais. 2017 ;[citado 2024 nov. 07 ]
Trabalho de evento
Prediction of the crack pattern in ceramic composites subjected to temperature variation using lattice models (2017)
Zanardi, Heloísa; Zago, Igor Paganotto; Angélico, Ricardo Afonso
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: MATERIAIS CERÂMICOS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ZANARDI, Heloísa e ZAGO, Igor Paganotto e ANGÉLICO, Ricardo Afonso. Prediction of the crack pattern in ceramic composites subjected to temperature variation using lattice models. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/829e244f-3b77-4e13-82a3-71c75899d1e2/trabalho%2006%20-%20%20Prediction%20of%20the%20crack%20pattern%20in%20ceramic%20composites%20subjected%20to%20temperature%20variation%20using%20lattice%20models%20%28COBEM%202017%29.pdf. Acesso em: 07 nov. 2024.
APA
Zanardi, H., Zago, I. P., & Angélico, R. A. (2017). Prediction of the crack pattern in ceramic composites subjected to temperature variation using lattice models. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/829e244f-3b77-4e13-82a3-71c75899d1e2/trabalho%2006%20-%20%20Prediction%20of%20the%20crack%20pattern%20in%20ceramic%20composites%20subjected%20to%20temperature%20variation%20using%20lattice%20models%20%28COBEM%202017%29.pdf
NLM
Zanardi H, Zago IP, Angélico RA. Prediction of the crack pattern in ceramic composites subjected to temperature variation using lattice models [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/829e244f-3b77-4e13-82a3-71c75899d1e2/trabalho%2006%20-%20%20Prediction%20of%20the%20crack%20pattern%20in%20ceramic%20composites%20subjected%20to%20temperature%20variation%20using%20lattice%20models%20%28COBEM%202017%29.pdf
Vancouver
Zanardi H, Zago IP, Angélico RA. Prediction of the crack pattern in ceramic composites subjected to temperature variation using lattice models [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/829e244f-3b77-4e13-82a3-71c75899d1e2/trabalho%2006%20-%20%20Prediction%20of%20the%20crack%20pattern%20in%20ceramic%20composites%20subjected%20to%20temperature%20variation%20using%20lattice%20models%20%28COBEM%202017%29.pdf
Trabalho de evento
Experimental assessment of a low reynolds number vehicle (2017)
Acevedo Giraldo, Daniel; Botero Bolívar, Laura; Bravo Mosquera, Pedro David; Cerón Muñoz, Hernán Darío ; Catalano, Fernando Martini
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: AEROFÓLIOS, TÚNEIS DE VENTO, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ACEVEDO GIRALDO, Daniel et al. Experimental assessment of a low reynolds number vehicle. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/8edff6fb-cef9-4db0-8759-0d18d987db28/trabalho%2017%20-%20EXPERIMENTAL%20ASSESMENT%20OF%20A%20LOW%20REYNOLDS%20NUMBER%20VEHICLE%20%28COBEM%202017%29.pdf. Acesso em: 07 nov. 2024.
APA
Acevedo Giraldo, D., Botero Bolívar, L., Bravo Mosquera, P. D., Cerón Muñoz, H. D., & Catalano, F. M. (2017). Experimental assessment of a low reynolds number vehicle. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/8edff6fb-cef9-4db0-8759-0d18d987db28/trabalho%2017%20-%20EXPERIMENTAL%20ASSESMENT%20OF%20A%20LOW%20REYNOLDS%20NUMBER%20VEHICLE%20%28COBEM%202017%29.pdf
NLM
Acevedo Giraldo D, Botero Bolívar L, Bravo Mosquera PD, Cerón Muñoz HD, Catalano FM. Experimental assessment of a low reynolds number vehicle [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/8edff6fb-cef9-4db0-8759-0d18d987db28/trabalho%2017%20-%20EXPERIMENTAL%20ASSESMENT%20OF%20A%20LOW%20REYNOLDS%20NUMBER%20VEHICLE%20%28COBEM%202017%29.pdf
Vancouver
Acevedo Giraldo D, Botero Bolívar L, Bravo Mosquera PD, Cerón Muñoz HD, Catalano FM. Experimental assessment of a low reynolds number vehicle [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/8edff6fb-cef9-4db0-8759-0d18d987db28/trabalho%2017%20-%20EXPERIMENTAL%20ASSESMENT%20OF%20A%20LOW%20REYNOLDS%20NUMBER%20VEHICLE%20%28COBEM%202017%29.pdf
Trabalho de evento
Instrumented module for investigation of contact forces for use in rehabilitation and assessment of bimanual functionalities (2017)
Martelleto, Marcela Nazareth; Aguiar, Paulo Marcos de; Burdet, Etienne; Caurin, Glauco Augusto de Paula ; Aroca, Rafael Vidal; Pedro, Leonardo Marquez
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidades: EESC, BIOENGENHARIA
Subjects: ACIDENTE VASCULAR CEREBRAL, TECNOLOGIAS DA SAÚDE, MECATRÔNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTELLETO, Marcela Nazareth et al. Instrumented module for investigation of contact forces for use in rehabilitation and assessment of bimanual functionalities. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/297383ba-9367-4dd3-8fe6-a47fe6cf2ed0/trabalho%2011%20-%20Instrumented%20module%20for%20investigation%20of%20contact%20forces%20for%20use%20in%20rehabilitation%20and%20assessment%20of%20bimanual%20functionalities%20%28cobem%202017%29.pdf. Acesso em: 07 nov. 2024.
APA
Martelleto, M. N., Aguiar, P. M. de, Burdet, E., Caurin, G. A. de P., Aroca, R. V., & Pedro, L. M. (2017). Instrumented module for investigation of contact forces for use in rehabilitation and assessment of bimanual functionalities. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/297383ba-9367-4dd3-8fe6-a47fe6cf2ed0/trabalho%2011%20-%20Instrumented%20module%20for%20investigation%20of%20contact%20forces%20for%20use%20in%20rehabilitation%20and%20assessment%20of%20bimanual%20functionalities%20%28cobem%202017%29.pdf
NLM
Martelleto MN, Aguiar PM de, Burdet E, Caurin GA de P, Aroca RV, Pedro LM. Instrumented module for investigation of contact forces for use in rehabilitation and assessment of bimanual functionalities [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/297383ba-9367-4dd3-8fe6-a47fe6cf2ed0/trabalho%2011%20-%20Instrumented%20module%20for%20investigation%20of%20contact%20forces%20for%20use%20in%20rehabilitation%20and%20assessment%20of%20bimanual%20functionalities%20%28cobem%202017%29.pdf
Vancouver
Martelleto MN, Aguiar PM de, Burdet E, Caurin GA de P, Aroca RV, Pedro LM. Instrumented module for investigation of contact forces for use in rehabilitation and assessment of bimanual functionalities [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/297383ba-9367-4dd3-8fe6-a47fe6cf2ed0/trabalho%2011%20-%20Instrumented%20module%20for%20investigation%20of%20contact%20forces%20for%20use%20in%20rehabilitation%20and%20assessment%20of%20bimanual%20functionalities%20%28cobem%202017%29.pdf
Trabalho de evento
Aeroacoustic effect of a seal position attached in slat cove surface (2017)
Himeno, Fernando Henrique Tadashi; Amaral, Filipe Ramos do; Medeiros, Marcello Augusto Faraco de
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: AEROACÚSTICA, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
HIMENO, Fernando Henrique Tadashi e AMARAL, Filipe Ramos do e MEDEIROS, Marcello Augusto Faraco de. Aeroacoustic effect of a seal position attached in slat cove surface. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/9d566336-250e-4942-84cd-52a69c8b68fb/trabalho%2012%20-%20Aeroacoustic%20Effect%20of%20a%20Seal%20Position%20Attached%20in%20Slat%20Cove%20Surface%20%2824th%20ABCM%20International%20Congress%20of%20Mechanical%20Engineering%29.pdf. Acesso em: 07 nov. 2024.
APA
Himeno, F. H. T., Amaral, F. R. do, & Medeiros, M. A. F. de. (2017). Aeroacoustic effect of a seal position attached in slat cove surface. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/9d566336-250e-4942-84cd-52a69c8b68fb/trabalho%2012%20-%20Aeroacoustic%20Effect%20of%20a%20Seal%20Position%20Attached%20in%20Slat%20Cove%20Surface%20%2824th%20ABCM%20International%20Congress%20of%20Mechanical%20Engineering%29.pdf
NLM
Himeno FHT, Amaral FR do, Medeiros MAF de. Aeroacoustic effect of a seal position attached in slat cove surface [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/9d566336-250e-4942-84cd-52a69c8b68fb/trabalho%2012%20-%20Aeroacoustic%20Effect%20of%20a%20Seal%20Position%20Attached%20in%20Slat%20Cove%20Surface%20%2824th%20ABCM%20International%20Congress%20of%20Mechanical%20Engineering%29.pdf
Vancouver
Himeno FHT, Amaral FR do, Medeiros MAF de. Aeroacoustic effect of a seal position attached in slat cove surface [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/9d566336-250e-4942-84cd-52a69c8b68fb/trabalho%2012%20-%20Aeroacoustic%20Effect%20of%20a%20Seal%20Position%20Attached%20in%20Slat%20Cove%20Surface%20%2824th%20ABCM%20International%20Congress%20of%20Mechanical%20Engineering%29.pdf
Trabalho de evento
Characterization of slug flow in annular duct, using high speed video camera, annular wire-mesh sensor and PIV (2017)
Hernandez Cely, Marlon Mauricio ; Baptistella, Victor Eduardo Corte; Hernandez Rodriguez, Oscar Mauricio
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: ESCOAMENTO BIFÁSICO, FLUXO DOS LÍQUIDOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
HERNANDEZ CELY, Marlon Mauricio e BAPTISTELLA, Victor Eduardo Corte e HERNANDEZ RODRIGUEZ, Oscar Mauricio. Characterization of slug flow in annular duct, using high speed video camera, annular wire-mesh sensor and PIV. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/721d1485-dd74-423f-b8aa-92642ad14823/OK___trabalho%2023%20-%20CHARACTERIZATION%20OF%20SLUG%20FLOW%20IN%20ANNULAR%20DUCT%2C%20USING%20HIGH%20SPEED%20VIDEO%20CAMERA%2C%20ANNULAR%20WIRE-MESH%20SENSOR%20AND%20PIV.pdf. Acesso em: 07 nov. 2024.
APA
Hernandez Cely, M. M., Baptistella, V. E. C., & Hernandez Rodriguez, O. M. (2017). Characterization of slug flow in annular duct, using high speed video camera, annular wire-mesh sensor and PIV. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/721d1485-dd74-423f-b8aa-92642ad14823/OK___trabalho%2023%20-%20CHARACTERIZATION%20OF%20SLUG%20FLOW%20IN%20ANNULAR%20DUCT%2C%20USING%20HIGH%20SPEED%20VIDEO%20CAMERA%2C%20ANNULAR%20WIRE-MESH%20SENSOR%20AND%20PIV.pdf
NLM
Hernandez Cely MM, Baptistella VEC, Hernandez Rodriguez OM. Characterization of slug flow in annular duct, using high speed video camera, annular wire-mesh sensor and PIV [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/721d1485-dd74-423f-b8aa-92642ad14823/OK___trabalho%2023%20-%20CHARACTERIZATION%20OF%20SLUG%20FLOW%20IN%20ANNULAR%20DUCT%2C%20USING%20HIGH%20SPEED%20VIDEO%20CAMERA%2C%20ANNULAR%20WIRE-MESH%20SENSOR%20AND%20PIV.pdf
Vancouver
Hernandez Cely MM, Baptistella VEC, Hernandez Rodriguez OM. Characterization of slug flow in annular duct, using high speed video camera, annular wire-mesh sensor and PIV [Internet]. Anais. 2017 ;[citado 2024 nov. 07 ] Available from: https://repositorio.usp.br/directbitstream/721d1485-dd74-423f-b8aa-92642ad14823/OK___trabalho%2023%20-%20CHARACTERIZATION%20OF%20SLUG%20FLOW%20IN%20ANNULAR%20DUCT%2C%20USING%20HIGH%20SPEED%20VIDEO%20CAMERA%2C%20ANNULAR%20WIRE-MESH%20SENSOR%20AND%20PIV.pdf

USP Schools

ReP

Filtros

USP Schools

Departament

Authors

USP affiliated authors

Date published

Subjects

Publisher

Funding Agencies

Normalized affiliation

Non normalized affiliation

Countries of institutions of collaboration