Filtros : "Philadelphia, PA, USA" Limpar

Filtros



Refine with date range


  • Source: Experimental Thermal and Fluid Science. Unidade: EESC

    Subjects: TRANSFERÊNCIA DE CALOR, ESCOAMENTO BIFÁSICO, ENGENHARIA MECÂNICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      MARCHETTO, Daniel Borba et al. Condensation flow inside tubes: a review of heat transfer coefficient measurement techniques, experimental databases and prediction methods. Experimental Thermal and Fluid Science, v. 160, p. 1-33, 2025Tradução . . Disponível em: http://dx.doi.org/10.1016/j.expthermflusci.2024.111298. Acesso em: 06 out. 2024.
    • APA

      Marchetto, D. B., Marinheiro, M. M., Souza Netto, A. T. de, Furlan, G., Ribatski, G., Thome, J. R., & Tibiriçá, C. B. (2025). Condensation flow inside tubes: a review of heat transfer coefficient measurement techniques, experimental databases and prediction methods. Experimental Thermal and Fluid Science, 160, 1-33. doi:10.1016/j.expthermflusci.2024.111298
    • NLM

      Marchetto DB, Marinheiro MM, Souza Netto AT de, Furlan G, Ribatski G, Thome JR, Tibiriçá CB. Condensation flow inside tubes: a review of heat transfer coefficient measurement techniques, experimental databases and prediction methods [Internet]. Experimental Thermal and Fluid Science. 2025 ; 160 1-33.[citado 2024 out. 06 ] Available from: http://dx.doi.org/10.1016/j.expthermflusci.2024.111298
    • Vancouver

      Marchetto DB, Marinheiro MM, Souza Netto AT de, Furlan G, Ribatski G, Thome JR, Tibiriçá CB. Condensation flow inside tubes: a review of heat transfer coefficient measurement techniques, experimental databases and prediction methods [Internet]. Experimental Thermal and Fluid Science. 2025 ; 160 1-33.[citado 2024 out. 06 ] Available from: http://dx.doi.org/10.1016/j.expthermflusci.2024.111298
  • Source: Experimental Thermal and Fluid Science. Unidade: EESC

    Subjects: PROCESSAMENTO DE IMAGENS, ESCOAMENTO BIFÁSICO, TRANSFERÊNCIA DE CALOR, ENGENHARIA MECÂNICA

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      MARTINS, Ivan Talão e FARIÑAS ALVARIÑO, Pablo e CABEZAS GÓMEZ, Luben. A new methodology for experimental analysis of single-cavity bubble’s nucleation, growth and detachment in saturated HFE-7100. Experimental Thermal and Fluid Science, v. 159, p. 1-18, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.expthermflusci.2024.111272. Acesso em: 06 out. 2024.
    • APA

      Martins, I. T., Fariñas Alvariño, P., & Cabezas Gómez, L. (2024). A new methodology for experimental analysis of single-cavity bubble’s nucleation, growth and detachment in saturated HFE-7100. Experimental Thermal and Fluid Science, 159, 1-18. doi:10.1016/j.expthermflusci.2024.111272
    • NLM

      Martins IT, Fariñas Alvariño P, Cabezas Gómez L. A new methodology for experimental analysis of single-cavity bubble’s nucleation, growth and detachment in saturated HFE-7100 [Internet]. Experimental Thermal and Fluid Science. 2024 ; 159 1-18.[citado 2024 out. 06 ] Available from: http://dx.doi.org/10.1016/j.expthermflusci.2024.111272
    • Vancouver

      Martins IT, Fariñas Alvariño P, Cabezas Gómez L. A new methodology for experimental analysis of single-cavity bubble’s nucleation, growth and detachment in saturated HFE-7100 [Internet]. Experimental Thermal and Fluid Science. 2024 ; 159 1-18.[citado 2024 out. 06 ] Available from: http://dx.doi.org/10.1016/j.expthermflusci.2024.111272
  • Source: Experimental Thermal and Fluid Science. Unidade: EESC

    Subjects: ESCOAMENTO BIFÁSICO, TRANSFERÊNCIA DE CALOR, ENGENHARIA MECÂNICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      MOREIRA, Tiago Augusto e RIBATSKI, Gherhardt. Special issue: in-tube flow pattern transitions under diabatic and adiabatic conditions. Experimental Thermal and Fluid Science. Philadelphia, PA, USA: Escola de Engenharia de São Carlos, Universidade de São Paulo. Disponível em: http://dx.doi.org/10.1016/j.expthermflusci.2024.111273. Acesso em: 06 out. 2024. , 2024
    • APA

      Moreira, T. A., & Ribatski, G. (2024). Special issue: in-tube flow pattern transitions under diabatic and adiabatic conditions. Experimental Thermal and Fluid Science. Philadelphia, PA, USA: Escola de Engenharia de São Carlos, Universidade de São Paulo. doi:10.1016/j.expthermflusci.2024.111273
    • NLM

      Moreira TA, Ribatski G. Special issue: in-tube flow pattern transitions under diabatic and adiabatic conditions [Internet]. Experimental Thermal and Fluid Science. 2024 ; 1-3.[citado 2024 out. 06 ] Available from: http://dx.doi.org/10.1016/j.expthermflusci.2024.111273
    • Vancouver

      Moreira TA, Ribatski G. Special issue: in-tube flow pattern transitions under diabatic and adiabatic conditions [Internet]. Experimental Thermal and Fluid Science. 2024 ; 1-3.[citado 2024 out. 06 ] Available from: http://dx.doi.org/10.1016/j.expthermflusci.2024.111273
  • Source: Enzyme and Microbial Technology. Unidade: EESC

    Subjects: BAGAÇOS, REATORES ANAERÓBIOS, CANA-DE-AÇÚCAR, ENGENHARIA HIDRÁULICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      RABELO, Camila Abreu Borges da Silva et al. Metataxonomic characterization of an autochthonous and allochthonous microbial consortium involved in a two-stage anaerobic batch reactor applied to hydrogen and methane production from sugarcane bagasse. Enzyme and Microbial Technology, v. 162, p. 1-11, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.enzmictec.2022.110119. Acesso em: 06 out. 2024.
    • APA

      Rabelo, C. A. B. da S., Camargo, F. P., Sakamoto, I. K., & Varesche, M. B. A. (2023). Metataxonomic characterization of an autochthonous and allochthonous microbial consortium involved in a two-stage anaerobic batch reactor applied to hydrogen and methane production from sugarcane bagasse. Enzyme and Microbial Technology, 162, 1-11. doi:10.1016/j.enzmictec.2022.110119
    • NLM

      Rabelo CAB da S, Camargo FP, Sakamoto IK, Varesche MBA. Metataxonomic characterization of an autochthonous and allochthonous microbial consortium involved in a two-stage anaerobic batch reactor applied to hydrogen and methane production from sugarcane bagasse [Internet]. Enzyme and Microbial Technology. 2023 ; 162 1-11.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.enzmictec.2022.110119
    • Vancouver

      Rabelo CAB da S, Camargo FP, Sakamoto IK, Varesche MBA. Metataxonomic characterization of an autochthonous and allochthonous microbial consortium involved in a two-stage anaerobic batch reactor applied to hydrogen and methane production from sugarcane bagasse [Internet]. Enzyme and Microbial Technology. 2023 ; 162 1-11.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.enzmictec.2022.110119
  • Source: Experimental Thermal and Fluid Science. Unidade: EESC

    Subjects: ESCOAMENTO, HIDROCARBONETOS, ENGENHARIA MECÂNICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      BAPTISTELLA, Victor Eduardo Corte e MOREIRA, Tiago Augusto e RIBATSKI, Gherhardt. Liquid-film thickness during flow boiling of pure hydrocarbons and their mixtures. Experimental Thermal and Fluid Science, v. 144, p. 1-17, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.expthermflusci.2023.110877. Acesso em: 06 out. 2024.
    • APA

      Baptistella, V. E. C., Moreira, T. A., & Ribatski, G. (2023). Liquid-film thickness during flow boiling of pure hydrocarbons and their mixtures. Experimental Thermal and Fluid Science, 144, 1-17. doi:10.1016/j.expthermflusci.2023.110877
    • NLM

      Baptistella VEC, Moreira TA, Ribatski G. Liquid-film thickness during flow boiling of pure hydrocarbons and their mixtures [Internet]. Experimental Thermal and Fluid Science. 2023 ; 144 1-17.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.expthermflusci.2023.110877
    • Vancouver

      Baptistella VEC, Moreira TA, Ribatski G. Liquid-film thickness during flow boiling of pure hydrocarbons and their mixtures [Internet]. Experimental Thermal and Fluid Science. 2023 ; 144 1-17.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.expthermflusci.2023.110877
  • Source: International Journal of Geotechnical Engineering. Unidade: EESC

    Subjects: ESTACAS, AREIA, CIMENTO, GEOTECNIA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      SANTOS FILHO, João Manoel Sampaio Mathias dos e MORAIS, Thaise da Silva Oliveira e TSUHA, Cristina de Hollanda Cavalcanti. Helical piles with cement injection in medium dense sand. International Journal of Geotechnical Engineering, v. 17, n. 4, p. 352-362, 2023Tradução . . Disponível em: http://dx.doi.org/10.1080/19386362.2023.2250200. Acesso em: 06 out. 2024.
    • APA

      Santos Filho, J. M. S. M. dos, Morais, T. da S. O., & Tsuha, C. de H. C. (2023). Helical piles with cement injection in medium dense sand. International Journal of Geotechnical Engineering, 17( 4), 352-362. doi:10.1080/19386362.2023.2250200
    • NLM

      Santos Filho JMSM dos, Morais T da SO, Tsuha C de HC. Helical piles with cement injection in medium dense sand [Internet]. International Journal of Geotechnical Engineering. 2023 ; 17( 4): 352-362.[citado 2024 out. 06 ] Available from: http://dx.doi.org/10.1080/19386362.2023.2250200
    • Vancouver

      Santos Filho JMSM dos, Morais T da SO, Tsuha C de HC. Helical piles with cement injection in medium dense sand [Internet]. International Journal of Geotechnical Engineering. 2023 ; 17( 4): 352-362.[citado 2024 out. 06 ] Available from: http://dx.doi.org/10.1080/19386362.2023.2250200
  • Source: Mechanics of Advanced Materials and Structures. Unidade: EESC

    Subjects: TECNOLOGIA MECÂNICA, MATERIAIS COMPÓSITOS DE FIBRAS, MÉTODO DOS ELEMENTOS FINITOS, ENGENHARIA AERONÁUTICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      POSSENTI, Kleison Antonio et al. Detection of changes in dynamic characteristics of composite structures using Kriging metamodeling procedure: Experimental and computational analysis. Mechanics of Advanced Materials and Structures, p. 1-18, 2023Tradução . . Disponível em: https://doi.org/10.1080/15376494.2023.2245816. Acesso em: 06 out. 2024.
    • APA

      Possenti, K. A., Menezes, V. G. S. de, Vandepitte, D., Tita, V., & Medeiros, R. de. (2023). Detection of changes in dynamic characteristics of composite structures using Kriging metamodeling procedure: Experimental and computational analysis. Mechanics of Advanced Materials and Structures, 1-18. doi:10.1080/15376494.2023.2245816
    • NLM

      Possenti KA, Menezes VGS de, Vandepitte D, Tita V, Medeiros R de. Detection of changes in dynamic characteristics of composite structures using Kriging metamodeling procedure: Experimental and computational analysis [Internet]. Mechanics of Advanced Materials and Structures. 2023 ; 1-18.[citado 2024 out. 06 ] Available from: https://doi.org/10.1080/15376494.2023.2245816
    • Vancouver

      Possenti KA, Menezes VGS de, Vandepitte D, Tita V, Medeiros R de. Detection of changes in dynamic characteristics of composite structures using Kriging metamodeling procedure: Experimental and computational analysis [Internet]. Mechanics of Advanced Materials and Structures. 2023 ; 1-18.[citado 2024 out. 06 ] Available from: https://doi.org/10.1080/15376494.2023.2245816
  • Source: Mechanics of Advanced Materials and Structures. Unidade: EESC

    Subjects: SENSOR, MÉTODO DOS ELEMENTOS FINITOS, PIEZOELETRICIDADE, ENGENHARIA MECÂNICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      QUIÑONES VELÁSQUEZ, Jelder e TRINDADE, Marcelo Areias. Finite element modeling and analysis of adhesive layer effects in surface-bonded piezoelectric sensors and actuators including non-uniform thickness. Mechanics of Advanced Materials and Structures, v. 29, n. 25, p. 3658-3673, 2022Tradução . . Disponível em: https://doi.org/10.1080/15376494.2021.1907490. Acesso em: 06 out. 2024.
    • APA

      Quiñones Velásquez, J., & Trindade, M. A. (2022). Finite element modeling and analysis of adhesive layer effects in surface-bonded piezoelectric sensors and actuators including non-uniform thickness. Mechanics of Advanced Materials and Structures, 29( 25), 3658-3673. doi:10.1080/15376494.2021.1907490
    • NLM

      Quiñones Velásquez J, Trindade MA. Finite element modeling and analysis of adhesive layer effects in surface-bonded piezoelectric sensors and actuators including non-uniform thickness [Internet]. Mechanics of Advanced Materials and Structures. 2022 ; 29( 25): 3658-3673.[citado 2024 out. 06 ] Available from: https://doi.org/10.1080/15376494.2021.1907490
    • Vancouver

      Quiñones Velásquez J, Trindade MA. Finite element modeling and analysis of adhesive layer effects in surface-bonded piezoelectric sensors and actuators including non-uniform thickness [Internet]. Mechanics of Advanced Materials and Structures. 2022 ; 29( 25): 3658-3673.[citado 2024 out. 06 ] Available from: https://doi.org/10.1080/15376494.2021.1907490
  • Source: Mechanics of Advanced Materials and Structures. Unidade: EESC

    Subjects: MATERIAIS COMPÓSITOS, FADIGA DOS MATERIAIS, CISALHAMENTO, MATERIAIS

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      TONATTO, Maikson Luiz Passaia e TARPANI, José Ricardo e AMICO, Sandro Campos. Short-beam shear fatigue behavior of round curved pultruded composite. Mechanics of Advanced Materials and Structures, v. 29, n. 26, p. 5579-5587, 2022Tradução . . Disponível em: https://doi.org/10.1080/15376494.2021.1959968. Acesso em: 06 out. 2024.
    • APA

      Tonatto, M. L. P., Tarpani, J. R., & Amico, S. C. (2022). Short-beam shear fatigue behavior of round curved pultruded composite. Mechanics of Advanced Materials and Structures, 29( 26), 5579-5587. doi:10.1080/15376494.2021.1959968
    • NLM

      Tonatto MLP, Tarpani JR, Amico SC. Short-beam shear fatigue behavior of round curved pultruded composite [Internet]. Mechanics of Advanced Materials and Structures. 2022 ; 29( 26): 5579-5587.[citado 2024 out. 06 ] Available from: https://doi.org/10.1080/15376494.2021.1959968
    • Vancouver

      Tonatto MLP, Tarpani JR, Amico SC. Short-beam shear fatigue behavior of round curved pultruded composite [Internet]. Mechanics of Advanced Materials and Structures. 2022 ; 29( 26): 5579-5587.[citado 2024 out. 06 ] Available from: https://doi.org/10.1080/15376494.2021.1959968
  • Source: Experimental Thermal and Fluid Science. Unidade: EESC

    Subjects: ENGENHARIA MECÂNICA, ESCOAMENTO BIFÁSICO, AERAÇÃO

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      CONDE FONTENLA, Marcos et al. On the width and mean value of bubble size distributions under subcooled flow boiling. Experimental Thermal and Fluid Science, v. 124, p. 1-18, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.expthermflusci.2021.110368. Acesso em: 06 out. 2024.
    • APA

      Conde Fontenla, M., Paz, C., Concheiro, M., & Ribatski, G. (2021). On the width and mean value of bubble size distributions under subcooled flow boiling. Experimental Thermal and Fluid Science, 124, 1-18. doi:10.1016/j.expthermflusci.2021.110368
    • NLM

      Conde Fontenla M, Paz C, Concheiro M, Ribatski G. On the width and mean value of bubble size distributions under subcooled flow boiling [Internet]. Experimental Thermal and Fluid Science. 2021 ; 124 1-18.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.expthermflusci.2021.110368
    • Vancouver

      Conde Fontenla M, Paz C, Concheiro M, Ribatski G. On the width and mean value of bubble size distributions under subcooled flow boiling [Internet]. Experimental Thermal and Fluid Science. 2021 ; 124 1-18.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.expthermflusci.2021.110368
  • Source: Information Sciences. Unidade: EESC

    Subjects: LÓGICA FUZZY, SISTEMAS DINÂMICOS, ESTABILIDADE DE LIAPUNOV, ENGENHARIA ELÉTRICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      VALENTINO, Michele Cristina et al. Sufficient conditions in terms of linear matrix inequalities for guaranteed ultimately boundedness of solutions of switched Takagi-Sugeno fuzzy systems using the S-procedure. Information Sciences, v. 572, p. 501-521, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.ins.2021.04.103. Acesso em: 06 out. 2024.
    • APA

      Valentino, M. C., Faria, F. A., Oliveira, V. A. de, & Alberto, L. F. C. (2021). Sufficient conditions in terms of linear matrix inequalities for guaranteed ultimately boundedness of solutions of switched Takagi-Sugeno fuzzy systems using the S-procedure. Information Sciences, 572, 501-521. doi:10.1016/j.ins.2021.04.103
    • NLM

      Valentino MC, Faria FA, Oliveira VA de, Alberto LFC. Sufficient conditions in terms of linear matrix inequalities for guaranteed ultimately boundedness of solutions of switched Takagi-Sugeno fuzzy systems using the S-procedure [Internet]. Information Sciences. 2021 ; 572 501-521.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.ins.2021.04.103
    • Vancouver

      Valentino MC, Faria FA, Oliveira VA de, Alberto LFC. Sufficient conditions in terms of linear matrix inequalities for guaranteed ultimately boundedness of solutions of switched Takagi-Sugeno fuzzy systems using the S-procedure [Internet]. Information Sciences. 2021 ; 572 501-521.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.ins.2021.04.103
  • Source: Information Sciences. Unidade: EESC

    Subjects: LÓGICA FUZZY, SISTEMAS DINÂMICOS, ESTABILIDADE DE LIAPUNOV, ENGENHARIA ELÉTRICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      ELIAS, Leandro J et al. Stability analysis of Takagi–Sugeno systems using a switched fuzzy Lyapunov function. Information Sciences, v. 543, p. 43-57, 2021Tradução . . Disponível em: http://dx.doi.org/10.1016/j.ins.2020.07.020. Acesso em: 06 out. 2024.
    • APA

      Elias, L. J., Faria, F. A., Araujo, R., & Oliveira, V. A. de. (2021). Stability analysis of Takagi–Sugeno systems using a switched fuzzy Lyapunov function. Information Sciences, 543, 43-57. doi:10.1016/j.ins.2020.07.020
    • NLM

      Elias LJ, Faria FA, Araujo R, Oliveira VA de. Stability analysis of Takagi–Sugeno systems using a switched fuzzy Lyapunov function [Internet]. Information Sciences. 2021 ; 543 43-57.[citado 2024 out. 06 ] Available from: http://dx.doi.org/10.1016/j.ins.2020.07.020
    • Vancouver

      Elias LJ, Faria FA, Araujo R, Oliveira VA de. Stability analysis of Takagi–Sugeno systems using a switched fuzzy Lyapunov function [Internet]. Information Sciences. 2021 ; 543 43-57.[citado 2024 out. 06 ] Available from: http://dx.doi.org/10.1016/j.ins.2020.07.020
  • Source: Experimental Thermal and Fluid Science. Unidade: EESC

    Subjects: TRANSFERÊNCIA DE CALOR, ESCOAMENTO BIFÁSICO, ENGENHARIA MECÂNICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      MANETTI, Leonardo Lachi et al. Pool boiling heat transfer of HFE-7100 on metal foams. Experimental Thermal and Fluid Science, v. 113, p. 1-13, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.expthermflusci.2019.110025. Acesso em: 06 out. 2024.
    • APA

      Manetti, L. L., Ribatski, G., Souza, R. R. de, & Cardoso, E. M. (2020). Pool boiling heat transfer of HFE-7100 on metal foams. Experimental Thermal and Fluid Science, 113, 1-13. doi:10.1016/j.expthermflusci.2019.110025
    • NLM

      Manetti LL, Ribatski G, Souza RR de, Cardoso EM. Pool boiling heat transfer of HFE-7100 on metal foams [Internet]. Experimental Thermal and Fluid Science. 2020 ; 113 1-13.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.expthermflusci.2019.110025
    • Vancouver

      Manetti LL, Ribatski G, Souza RR de, Cardoso EM. Pool boiling heat transfer of HFE-7100 on metal foams [Internet]. Experimental Thermal and Fluid Science. 2020 ; 113 1-13.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.expthermflusci.2019.110025
  • Source: International Journal of Geotechnical Engineering. Unidade: EESC

    Subjects: SOLOS, ESTACAS, GEOTECNIA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      SPAGNOLI, Giovanni et al. Parametric analysis for the estimation of the installation power for large helical piles in dry cohesionless soils. International Journal of Geotechnical Engineering, v. 14, n. 5, p. 569-579, 2020Tradução . . Disponível em: https://doi.org/10.1080/19386362.2018.1452362. Acesso em: 06 out. 2024.
    • APA

      Spagnoli, G., Tsuha, C. de H. C., Oreste, P., & Mendez Solarte, C. M. (2020). Parametric analysis for the estimation of the installation power for large helical piles in dry cohesionless soils. International Journal of Geotechnical Engineering, 14( 5), 569-579. doi:10.1080/19386362.2018.1452362
    • NLM

      Spagnoli G, Tsuha C de HC, Oreste P, Mendez Solarte CM. Parametric analysis for the estimation of the installation power for large helical piles in dry cohesionless soils [Internet]. International Journal of Geotechnical Engineering. 2020 ; 14( 5): 569-579.[citado 2024 out. 06 ] Available from: https://doi.org/10.1080/19386362.2018.1452362
    • Vancouver

      Spagnoli G, Tsuha C de HC, Oreste P, Mendez Solarte CM. Parametric analysis for the estimation of the installation power for large helical piles in dry cohesionless soils [Internet]. International Journal of Geotechnical Engineering. 2020 ; 14( 5): 569-579.[citado 2024 out. 06 ] Available from: https://doi.org/10.1080/19386362.2018.1452362
  • Source: DFI Journal - The Journal of the Deep Foundations Institute. Unidade: EESC

    Subjects: ESTACAS, MÉTODO DE MONTE CARLO, GEOTECNIA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      SPAGNOLI, Giovanni et al. A sensitivity analysis on the parameters affecting large diameter helical pile installation torque, depth and installation power for offshore applications. DFI Journal - The Journal of the Deep Foundations Institute, v. 12, n. 3, p. 171-185, 2019Tradução . . Disponível em: https://doi.org/10.1080/19375247.2019.1595996. Acesso em: 06 out. 2024.
    • APA

      Spagnoli, G., Tsuha, C. de H. C., Oreste, P., & Mendez Solarte, C. M. (2019). A sensitivity analysis on the parameters affecting large diameter helical pile installation torque, depth and installation power for offshore applications. DFI Journal - The Journal of the Deep Foundations Institute, 12( 3), 171-185. doi:10.1080/19375247.2019.1595996
    • NLM

      Spagnoli G, Tsuha C de HC, Oreste P, Mendez Solarte CM. A sensitivity analysis on the parameters affecting large diameter helical pile installation torque, depth and installation power for offshore applications [Internet]. DFI Journal - The Journal of the Deep Foundations Institute. 2019 ; 12( 3): 171-185.[citado 2024 out. 06 ] Available from: https://doi.org/10.1080/19375247.2019.1595996
    • Vancouver

      Spagnoli G, Tsuha C de HC, Oreste P, Mendez Solarte CM. A sensitivity analysis on the parameters affecting large diameter helical pile installation torque, depth and installation power for offshore applications [Internet]. DFI Journal - The Journal of the Deep Foundations Institute. 2019 ; 12( 3): 171-185.[citado 2024 out. 06 ] Available from: https://doi.org/10.1080/19375247.2019.1595996
  • Source: Ultrasound in Medicine & Biology. Unidade: EESC

    Subjects: OSTEOGÊNESE, ULTRASSOM, ENGENHARIA ELÉTRICA

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      GUSMÃO, Carlos Vinícius Buarque de et al. Effect of low-intensity pulsed ultrasound stimulation, extracorporeal shockwaves and radial pressure waves on Akt, BMP-2, ERK-2, FAK and TGF-β1 during bone healing in rat tibial defects. Ultrasound in Medicine & Biology, v. 45, n. 8, p. 2140-2161, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.ultrasmedbio.2019.04.011. Acesso em: 06 out. 2024.
    • APA

      Gusmão, C. V. B. de, Batista, N. A., Lemes, V. T. V., Maia Neto, W. L., Faria, L. D. de, Alves, J. M., & Belangero, W. D. (2019). Effect of low-intensity pulsed ultrasound stimulation, extracorporeal shockwaves and radial pressure waves on Akt, BMP-2, ERK-2, FAK and TGF-β1 during bone healing in rat tibial defects. Ultrasound in Medicine & Biology, 45( 8), 2140-2161. doi:10.1016/j.ultrasmedbio.2019.04.011
    • NLM

      Gusmão CVB de, Batista NA, Lemes VTV, Maia Neto WL, Faria LD de, Alves JM, Belangero WD. Effect of low-intensity pulsed ultrasound stimulation, extracorporeal shockwaves and radial pressure waves on Akt, BMP-2, ERK-2, FAK and TGF-β1 during bone healing in rat tibial defects [Internet]. Ultrasound in Medicine & Biology. 2019 ; 45( 8): 2140-2161.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.ultrasmedbio.2019.04.011
    • Vancouver

      Gusmão CVB de, Batista NA, Lemes VTV, Maia Neto WL, Faria LD de, Alves JM, Belangero WD. Effect of low-intensity pulsed ultrasound stimulation, extracorporeal shockwaves and radial pressure waves on Akt, BMP-2, ERK-2, FAK and TGF-β1 during bone healing in rat tibial defects [Internet]. Ultrasound in Medicine & Biology. 2019 ; 45( 8): 2140-2161.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.ultrasmedbio.2019.04.011
  • Source: Materials Characterization. Unidade: EESC

    Subjects: MATERIAIS COMPÓSITOS, VIDROS METÁLICOS, MATERIAIS

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      CAMPOS NETO, Nelson Delfino de et al. Phase formation maps in Zr48Cu46.5Al4Nb1.5 bulk metallic glass composites as a function of cooling rate and oxygen concentration. Materials Characterization, v. 158, p. 1-7, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.matchar.2019.109932. Acesso em: 06 out. 2024.
    • APA

      Campos Neto, N. D. de, Pereira, F. S., Antonio, S. G., Yaofeng, G., Clarke, A. J., Kaufman, M. J., & Oliveira, M. F. de. (2019). Phase formation maps in Zr48Cu46.5Al4Nb1.5 bulk metallic glass composites as a function of cooling rate and oxygen concentration. Materials Characterization, 158, 1-7. doi:10.1016/j.matchar.2019.109932
    • NLM

      Campos Neto ND de, Pereira FS, Antonio SG, Yaofeng G, Clarke AJ, Kaufman MJ, Oliveira MF de. Phase formation maps in Zr48Cu46.5Al4Nb1.5 bulk metallic glass composites as a function of cooling rate and oxygen concentration [Internet]. Materials Characterization. 2019 ; 158 1-7.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.matchar.2019.109932
    • Vancouver

      Campos Neto ND de, Pereira FS, Antonio SG, Yaofeng G, Clarke AJ, Kaufman MJ, Oliveira MF de. Phase formation maps in Zr48Cu46.5Al4Nb1.5 bulk metallic glass composites as a function of cooling rate and oxygen concentration [Internet]. Materials Characterization. 2019 ; 158 1-7.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.matchar.2019.109932
  • Source: Experimental Thermal and Fluid Science. Unidade: EESC

    Subjects: ESCOAMENTO BIFÁSICO, TRANSFERÊNCIA DE CALOR, ENGENHARIA MECÂNICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      LAVIN, Francisco Antonio Loyola e KANIZAWA, Fabio Toshio e RIBATSKI, Gherhardt. Analyses of the effects of channel inclination and rotation on two-phase flow characteristics and pressure drop in a rectangular channel. Experimental Thermal and Fluid Science, v. 109, p. 1-20, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.expthermflusci.2019.109850. Acesso em: 06 out. 2024.
    • APA

      Lavin, F. A. L., Kanizawa, F. T., & Ribatski, G. (2019). Analyses of the effects of channel inclination and rotation on two-phase flow characteristics and pressure drop in a rectangular channel. Experimental Thermal and Fluid Science, 109, 1-20. doi:10.1016/j.expthermflusci.2019.109850
    • NLM

      Lavin FAL, Kanizawa FT, Ribatski G. Analyses of the effects of channel inclination and rotation on two-phase flow characteristics and pressure drop in a rectangular channel [Internet]. Experimental Thermal and Fluid Science. 2019 ; 109 1-20.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.expthermflusci.2019.109850
    • Vancouver

      Lavin FAL, Kanizawa FT, Ribatski G. Analyses of the effects of channel inclination and rotation on two-phase flow characteristics and pressure drop in a rectangular channel [Internet]. Experimental Thermal and Fluid Science. 2019 ; 109 1-20.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.expthermflusci.2019.109850
  • Source: Experimental Thermal and Fluid Science. Unidade: EESC

    Subjects: ESCOAMENTO BIFÁSICO, PETRÓLEO, ENGENHARIA MECÂNICA

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      CAVICCHIO, Caio Augusto Moreira et al. Experimental study of viscosity effects on heavy crude oil-water coreannular flow pattern. Experimental Thermal and Fluid Science, v. 92, p. 270-285, 2018Tradução . . Disponível em: https://doi.org/10.1016/j.expthermflusci.2017.11.027. Acesso em: 06 out. 2024.
    • APA

      Cavicchio, C. A. M., Biazussi, J. L., Castro, M. S. de, Bannwart, A. C., Hernandez Rodriguez, O. M., & Carvalho, C. H. M. de. (2018). Experimental study of viscosity effects on heavy crude oil-water coreannular flow pattern. Experimental Thermal and Fluid Science, 92, 270-285. doi:10.1016/j.expthermflusci.2017.11.027
    • NLM

      Cavicchio CAM, Biazussi JL, Castro MS de, Bannwart AC, Hernandez Rodriguez OM, Carvalho CHM de. Experimental study of viscosity effects on heavy crude oil-water coreannular flow pattern [Internet]. Experimental Thermal and Fluid Science. 2018 ; 92 270-285.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.expthermflusci.2017.11.027
    • Vancouver

      Cavicchio CAM, Biazussi JL, Castro MS de, Bannwart AC, Hernandez Rodriguez OM, Carvalho CHM de. Experimental study of viscosity effects on heavy crude oil-water coreannular flow pattern [Internet]. Experimental Thermal and Fluid Science. 2018 ; 92 270-285.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.expthermflusci.2017.11.027
  • Source: International Journal of Engineering Science. Unidade: EESC

    Subjects: PIEZOELETRICIDADE, HOMOGENEIZAÇÃO, ESTRUTURAS

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      AGUIAR, Adair Roberto e BRAVO CASTILLERO, Julián e SILVA, Uziel Paulo da. Application of Mori–Tanaka method in 3–1 porous piezoelectric medium of crystal class 6. International Journal of Engineering Science, v. 123, p. 36-50, 2018Tradução . . Disponível em: https://doi.org/10.1016/j.ijengsci.2017.11.009. Acesso em: 06 out. 2024.
    • APA

      Aguiar, A. R., Bravo Castillero, J., & Silva, U. P. da. (2018). Application of Mori–Tanaka method in 3–1 porous piezoelectric medium of crystal class 6. International Journal of Engineering Science, 123, 36-50. doi:10.1016/j.ijengsci.2017.11.009
    • NLM

      Aguiar AR, Bravo Castillero J, Silva UP da. Application of Mori–Tanaka method in 3–1 porous piezoelectric medium of crystal class 6 [Internet]. International Journal of Engineering Science. 2018 ; 123 36-50.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.ijengsci.2017.11.009
    • Vancouver

      Aguiar AR, Bravo Castillero J, Silva UP da. Application of Mori–Tanaka method in 3–1 porous piezoelectric medium of crystal class 6 [Internet]. International Journal of Engineering Science. 2018 ; 123 36-50.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.ijengsci.2017.11.009

Digital Library of Intellectual Production of Universidade de São Paulo     2012 - 2024