ReP USP - Resultado da busca

Artigo de periodico
Nano-Scratch and Micro-Scratch Properties of CrN/DLC and DLC-W Coatings (2023)
Kolawole, Funsho Olaitan ; Santos, Marcos Dantas dos ; Kolawole, Shola Kolade ; Vencovsky, Paulo Konrad; Ludewigs, Danilo Assad; Tschiptschin, André Paulo
Source: Materials Performance and Characterization. Unidade: EP
Subjects: NANOPARTÍCULAS, REVESTIMENTOS, TRIBOLOGIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
KOLAWOLE, Funsho Olaitan et al. Nano-Scratch and Micro-Scratch Properties of CrN/DLC and DLC-W Coatings. Materials Performance and Characterization, 2023Tradução . . Disponível em: https://doi.org/10.1520/MPC20230028. Acesso em: 07 out. 2025.
APA
Kolawole, F. O., Santos, M. D. dos, Kolawole, S. K., Vencovsky, P. K., Ludewigs, D. A., & Tschiptschin, A. P. (2023). Nano-Scratch and Micro-Scratch Properties of CrN/DLC and DLC-W Coatings. Materials Performance and Characterization. doi:10.1520/MPC20230028
NLM
Kolawole FO, Santos MD dos, Kolawole SK, Vencovsky PK, Ludewigs DA, Tschiptschin AP. Nano-Scratch and Micro-Scratch Properties of CrN/DLC and DLC-W Coatings [Internet]. Materials Performance and Characterization. 2023 ;[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20230028
Vancouver
Kolawole FO, Santos MD dos, Kolawole SK, Vencovsky PK, Ludewigs DA, Tschiptschin AP. Nano-Scratch and Micro-Scratch Properties of CrN/DLC and DLC-W Coatings [Internet]. Materials Performance and Characterization. 2023 ;[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20230028
Artigo de periodico
Corrosion resistance of low-temperature and conventional plasma-nitrided 410S ferritic-martensitic stainless steels (2021)
Valera Jimenez, Luis Bernardo ; Uemura, M T; Calderon-Hernández, José Wilmar ; Pinedo, Carlos Eduardo ; Kolawole, Funsho Olaitan ; Tschiptschin, André Paulo
Source: Materials Performance and Characterization. Unidade: EP
Subjects: CORROSÃO, AÇO INOXIDÁVEL AUSTENÍTICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
VALERA JIMENEZ, Luis Bernardo et al. Corrosion resistance of low-temperature and conventional plasma-nitrided 410S ferritic-martensitic stainless steels. Materials Performance and Characterization, v. 10, n. 1, p. 181-188, 2021Tradução . . Disponível em: https://doi.org/10.1520/MPC20200099. Acesso em: 07 out. 2025.
APA
Valera Jimenez, L. B., Uemura, M. T., Calderon-Hernández, J. W., Pinedo, C. E., Kolawole, F. O., & Tschiptschin, A. P. (2021). Corrosion resistance of low-temperature and conventional plasma-nitrided 410S ferritic-martensitic stainless steels. Materials Performance and Characterization, 10( 1), 181-188. doi:10.1520/MPC20200099
NLM
Valera Jimenez LB, Uemura MT, Calderon-Hernández JW, Pinedo CE, Kolawole FO, Tschiptschin AP. Corrosion resistance of low-temperature and conventional plasma-nitrided 410S ferritic-martensitic stainless steels [Internet]. Materials Performance and Characterization. 2021 ;10( 1): 181-188.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20200099
Vancouver
Valera Jimenez LB, Uemura MT, Calderon-Hernández JW, Pinedo CE, Kolawole FO, Tschiptschin AP. Corrosion resistance of low-temperature and conventional plasma-nitrided 410S ferritic-martensitic stainless steels [Internet]. Materials Performance and Characterization. 2021 ;10( 1): 181-188.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20200099
Artigo de periodico
Parallelized particle swarm optimization to estimate the heat transfer coefficients of palm oil, canola oil, conventional, and accelerated petroleum oil quenchants (2019)
Fried, Zoltán; Felde, Imre; Otero, Rosa Lucia Simencio; Viscaino, Jonatas Martinelli; Totten, George Edward; Canale, Lauralice de Campos Franceschini
Source: Materials Performance and Characterization. Unidades: EESC, IQSC
Subjects: TÊMPERA, TRANSFERÊNCIA DE CALOR, MATERIAIS, ÓLEO DE SOJA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FRIED, Zoltán et al. Parallelized particle swarm optimization to estimate the heat transfer coefficients of palm oil, canola oil, conventional, and accelerated petroleum oil quenchants. Materials Performance and Characterization, v. 8, n. 2, p. 894-903, 2019Tradução . . Disponível em: https://doi.org/10.1520/MPC20180049. Acesso em: 07 out. 2025.
APA
Fried, Z., Felde, I., Otero, R. L. S., Viscaino, J. M., Totten, G. E., & Canale, L. de C. F. (2019). Parallelized particle swarm optimization to estimate the heat transfer coefficients of palm oil, canola oil, conventional, and accelerated petroleum oil quenchants. Materials Performance and Characterization, 8( 2), 894-903. doi:10.1520/MPC20180049
NLM
Fried Z, Felde I, Otero RLS, Viscaino JM, Totten GE, Canale L de CF. Parallelized particle swarm optimization to estimate the heat transfer coefficients of palm oil, canola oil, conventional, and accelerated petroleum oil quenchants [Internet]. Materials Performance and Characterization. 2019 ; 8( 2): 894-903.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20180049
Vancouver
Fried Z, Felde I, Otero RLS, Viscaino JM, Totten GE, Canale L de CF. Parallelized particle swarm optimization to estimate the heat transfer coefficients of palm oil, canola oil, conventional, and accelerated petroleum oil quenchants [Internet]. Materials Performance and Characterization. 2019 ; 8( 2): 894-903.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20180049
Artigo de periodico
Quenchant cooling curves, rewetting, and surface heat flux properties of vegetable oils (2019)
Otero, Rosa Lucia Simencio; Viscaino, Jonatas Martinelli; Jun, Xu; Jianfeng, Gu; Totten, George Edward; Canale, Lauralice de Campos Franceschini
Source: Materials Performance and Characterization. Unidades: EESC, IQSC
Subjects: TRANSFERÊNCIA DE CALOR, TÊMPERA, ÓLEOS VEGETAIS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OTERO, Rosa Lucia Simencio et al. Quenchant cooling curves, rewetting, and surface heat flux properties of vegetable oils. Materials Performance and Characterization, v. 8, n. 2, p. 143-169, 2019Tradução . . Disponível em: https://doi.org/10.1520/MPC20180042. Acesso em: 07 out. 2025.
APA
Otero, R. L. S., Viscaino, J. M., Jun, X., Jianfeng, G., Totten, G. E., & Canale, L. de C. F. (2019). Quenchant cooling curves, rewetting, and surface heat flux properties of vegetable oils. Materials Performance and Characterization, 8( 2), 143-169. doi:10.1520/MPC20180042
NLM
Otero RLS, Viscaino JM, Jun X, Jianfeng G, Totten GE, Canale L de CF. Quenchant cooling curves, rewetting, and surface heat flux properties of vegetable oils [Internet]. Materials Performance and Characterization. 2019 ; 8( 2): 143-169.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20180042
Vancouver
Otero RLS, Viscaino JM, Jun X, Jianfeng G, Totten GE, Canale L de CF. Quenchant cooling curves, rewetting, and surface heat flux properties of vegetable oils [Internet]. Materials Performance and Characterization. 2019 ; 8( 2): 143-169.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20180042
Artigo de periodico
Assessment of cooling and heat transfer properties of quenchants with MATLAB (2019)
Meekisho, Lemmy; Otero, Rosa Lucia Simencio; Viscaino, Jonatas Martinelli; MacKenzie, D. Scott; Totten, George Edward; Canale, Lauralice de Campos Franceschini
Source: Materials Performance and Characterization. Unidades: EESC, IQSC
Subjects: TRANSFERÊNCIA DE CALOR, ÓLEOS VEGETAIS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MEEKISHO, Lemmy et al. Assessment of cooling and heat transfer properties of quenchants with MATLAB. Materials Performance and Characterization, v. 8, n. 2, p. 128-142, 2019Tradução . . Disponível em: https://doi.org/10.1520/MPC20180046. Acesso em: 07 out. 2025.
APA
Meekisho, L., Otero, R. L. S., Viscaino, J. M., MacKenzie, D. S., Totten, G. E., & Canale, L. de C. F. (2019). Assessment of cooling and heat transfer properties of quenchants with MATLAB. Materials Performance and Characterization, 8( 2), 128-142. doi:10.1520/MPC20180046
NLM
Meekisho L, Otero RLS, Viscaino JM, MacKenzie DS, Totten GE, Canale L de CF. Assessment of cooling and heat transfer properties of quenchants with MATLAB [Internet]. Materials Performance and Characterization. 2019 ; 8( 2): 128-142.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20180046
Vancouver
Meekisho L, Otero RLS, Viscaino JM, MacKenzie DS, Totten GE, Canale L de CF. Assessment of cooling and heat transfer properties of quenchants with MATLAB [Internet]. Materials Performance and Characterization. 2019 ; 8( 2): 128-142.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20180046
Artigo de periodico
Characterization of niobium carbide layers produced in ductile cast iron using thermo-reactive treatments (2017)
Soares, Carolina ; Mariani, Fábio Edson ; Casteletti, Luiz Carlos ; Lombardi Neto, Amadeu ; Totten, George Edward
Source: Materials Performance and Characterization. Unidade: EESC
Subjects: NIÓBIO, FERRO FUNDIDO, DESGASTE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOARES, Carolina et al. Characterization of niobium carbide layers produced in ductile cast iron using thermo-reactive treatments. Materials Performance and Characterization, v. 6, n. 4, p. 607-616, 2017Tradução . . Disponível em: https://doi.org/10.1520/MPC20160093. Acesso em: 07 out. 2025.
APA
Soares, C., Mariani, F. E., Casteletti, L. C., Lombardi Neto, A., & Totten, G. E. (2017). Characterization of niobium carbide layers produced in ductile cast iron using thermo-reactive treatments. Materials Performance and Characterization, 6( 4), 607-616. doi:10.1520/MPC20160093
NLM
Soares C, Mariani FE, Casteletti LC, Lombardi Neto A, Totten GE. Characterization of niobium carbide layers produced in ductile cast iron using thermo-reactive treatments [Internet]. Materials Performance and Characterization. 2017 ; 6( 4): 607-616.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20160093
Vancouver
Soares C, Mariani FE, Casteletti LC, Lombardi Neto A, Totten GE. Characterization of niobium carbide layers produced in ductile cast iron using thermo-reactive treatments [Internet]. Materials Performance and Characterization. 2017 ; 6( 4): 607-616.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20160093
Artigo de periodico
Uphill quenching of aluminum alloys (2017)
Mattos, Wellington da Silva; Totten, George Edward; Canale, Lauralice de Campos Franceschini
Source: Materials Performance and Characterization. Unidade: EESC
Subjects: MATERIAIS, TENSÃO RESIDUAL, TRATAMENTO TÉRMICO, TÊMPERA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MATTOS, Wellington da Silva e TOTTEN, George Edward e CANALE, Lauralice de Campos Franceschini. Uphill quenching of aluminum alloys. Materials Performance and Characterization, v. 6, n. 5, p. Paper MPC20160125 894-903, 2017Tradução . . Disponível em: https://doi.org/10.1520/MPC20160125. Acesso em: 07 out. 2025.
APA
Mattos, W. da S., Totten, G. E., & Canale, L. de C. F. (2017). Uphill quenching of aluminum alloys. Materials Performance and Characterization, 6( 5), Paper MPC20160125 894-903. doi:10.1520/MPC20160125
NLM
Mattos W da S, Totten GE, Canale L de CF. Uphill quenching of aluminum alloys [Internet]. Materials Performance and Characterization. 2017 ; 6( 5): Paper MPC20160125 894-903.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20160125
Vancouver
Mattos W da S, Totten GE, Canale L de CF. Uphill quenching of aluminum alloys [Internet]. Materials Performance and Characterization. 2017 ; 6( 5): Paper MPC20160125 894-903.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20160125
Artigo de periodico
Vegetable oils as metal quenchants: a comprehensive review (2017)
Otero, Rosa Lucia Simencio; Canale, Lauralice de Campos Franceschini ; Totten, George Edward; Meekisho, L.
Source: Materials Performance and Characterization. Unidade: EESC
Subjects: ÓLEOS VEGETAIS, TRATAMENTO TÉRMICO, TRANSFERÊNCIA DE CALOR, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OTERO, Rosa Lucia Simencio et al. Vegetable oils as metal quenchants: a comprehensive review. Materials Performance and Characterization, v. 6, n. 1, p. Paper MPC20160112 174-250, 2017Tradução . . Disponível em: https://doi.org/10.1520/MPC20160112. Acesso em: 07 out. 2025.
APA
Otero, R. L. S., Canale, L. de C. F., Totten, G. E., & Meekisho, L. (2017). Vegetable oils as metal quenchants: a comprehensive review. Materials Performance and Characterization, 6( 1), Paper MPC20160112 174-250. doi:10.1520/MPC20160112
NLM
Otero RLS, Canale L de CF, Totten GE, Meekisho L. Vegetable oils as metal quenchants: a comprehensive review [Internet]. Materials Performance and Characterization. 2017 ; 6( 1): Paper MPC20160112 174-250.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20160112
Vancouver
Otero RLS, Canale L de CF, Totten GE, Meekisho L. Vegetable oils as metal quenchants: a comprehensive review [Internet]. Materials Performance and Characterization. 2017 ; 6( 1): Paper MPC20160112 174-250.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20160112
Artigo de periodico
Development and use of a small laboratory intensive quenching (IQ) system (2017)
Albano, Luigi Leonardo Mazzucco; Misina, Fernando Seiti; Canale, Antonio Carlos ; Totten, George Edward; Canale, Lauralice de Campos Franceschini
Source: Materials Performance and Characterization. Unidade: EESC
Subjects: TENSÃO RESIDUAL, MECÂNICA DA FRATURA, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALBANO, Luigi Leonardo Mazzucco et al. Development and use of a small laboratory intensive quenching (IQ) system. Materials Performance and Characterization, v. 6, n. 5, p. Paper MPC20160126 785-794, 2017Tradução . . Disponível em: https://doi.org/10.1520/MPC20160126. Acesso em: 07 out. 2025.
APA
Albano, L. L. M., Misina, F. S., Canale, A. C., Totten, G. E., & Canale, L. de C. F. (2017). Development and use of a small laboratory intensive quenching (IQ) system. Materials Performance and Characterization, 6( 5), Paper MPC20160126 785-794. doi:10.1520/MPC20160126
NLM
Albano LLM, Misina FS, Canale AC, Totten GE, Canale L de CF. Development and use of a small laboratory intensive quenching (IQ) system [Internet]. Materials Performance and Characterization. 2017 ; 6( 5): Paper MPC20160126 785-794.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20160126
Vancouver
Albano LLM, Misina FS, Canale AC, Totten GE, Canale L de CF. Development and use of a small laboratory intensive quenching (IQ) system [Internet]. Materials Performance and Characterization. 2017 ; 6( 5): Paper MPC20160126 785-794.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20160126
Artigo de periodico
Characterization and wear performance of borided AISI 304 and UNS S31254 stainless steels (2017)
Mariani, Fábio Edson ; Aureliano, Ricardo Tadeu ; Casteletti, Luiz Carlos ; Lombardi Neto, Amadeu ; Totten, George Edward
Source: Materials Performance and Characterization. Unidade: EESC
Subjects: AÇO INOXIDÁVEL AUSTENÍTICO, DESGASTE DOS MATERIAIS, TRATAMENTO TÉRMICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARIANI, Fábio Edson et al. Characterization and wear performance of borided AISI 304 and UNS S31254 stainless steels. Materials Performance and Characterization, v. 6, n. 4, p. 523-530, 2017Tradução . . Disponível em: https://doi.org/10.1520/MPC20160096. Acesso em: 07 out. 2025.
APA
Mariani, F. E., Aureliano, R. T., Casteletti, L. C., Lombardi Neto, A., & Totten, G. E. (2017). Characterization and wear performance of borided AISI 304 and UNS S31254 stainless steels. Materials Performance and Characterization, 6( 4), 523-530. doi:10.1520/MPC20160096
NLM
Mariani FE, Aureliano RT, Casteletti LC, Lombardi Neto A, Totten GE. Characterization and wear performance of borided AISI 304 and UNS S31254 stainless steels [Internet]. Materials Performance and Characterization. 2017 ; 6( 4): 523-530.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20160096
Vancouver
Mariani FE, Aureliano RT, Casteletti LC, Lombardi Neto A, Totten GE. Characterization and wear performance of borided AISI 304 and UNS S31254 stainless steels [Internet]. Materials Performance and Characterization. 2017 ; 6( 4): 523-530.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20160096
Artigo de periodico
Comparative measurement and evaluation of the quenching intensity of palm oil, canola oil and a conventional petroleum oil quenchant based on temperature gradient measurements (2017)
Matijevic, Bozidar; Liscic, Bozidar; Totten, George Edward; Canale, Lauralice de Campos Franceschini
Source: Materials Performance and Characterization. Unidade: EESC
Subjects: MICROELETRÔNICA, TRANSFERÊNCIA DE CALOR, ÓLEOS E GORDURAS VEGETAIS COMESTÍVEIS, TRATAMENTO TÉRMICO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MATIJEVIC, Bozidar et al. Comparative measurement and evaluation of the quenching intensity of palm oil, canola oil and a conventional petroleum oil quenchant based on temperature gradient measurements. Materials Performance and Characterization, v. 6, n. 5, p. Paper MPC20170041 757-776, 2017Tradução . . Disponível em: https://doi.org/10.1520/MPC20170041. Acesso em: 07 out. 2025.
APA
Matijevic, B., Liscic, B., Totten, G. E., & Canale, L. de C. F. (2017). Comparative measurement and evaluation of the quenching intensity of palm oil, canola oil and a conventional petroleum oil quenchant based on temperature gradient measurements. Materials Performance and Characterization, 6( 5), Paper MPC20170041 757-776. doi:10.1520/MPC20170041
NLM
Matijevic B, Liscic B, Totten GE, Canale L de CF. Comparative measurement and evaluation of the quenching intensity of palm oil, canola oil and a conventional petroleum oil quenchant based on temperature gradient measurements [Internet]. Materials Performance and Characterization. 2017 ; 6( 5): Paper MPC20170041 757-776.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20170041
Vancouver
Matijevic B, Liscic B, Totten GE, Canale L de CF. Comparative measurement and evaluation of the quenching intensity of palm oil, canola oil and a conventional petroleum oil quenchant based on temperature gradient measurements [Internet]. Materials Performance and Characterization. 2017 ; 6( 5): Paper MPC20170041 757-776.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20170041
Artigo de periodico
Silica-based coatings for corrosion protection of AA7075 aluminum alloy (2017)
Rêgo, Galtiere Corrêa ; Bandeira, Rafael Marinho ; Aureliano Junior, Ricardo Tadeu; Lombardi, Amadeu N.; Casteletti, Luiz Carlos ; Totten, George Edward
Source: Materials Performance and Characterization. Unidades: EESC, IQSC
Subjects: DESGASTE CORROSIVO, ESTRUTURAS METÁLICAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RÊGO, Galtiere Corrêa et al. Silica-based coatings for corrosion protection of AA7075 aluminum alloy. Materials Performance and Characterization, 2017Tradução . . Disponível em: https://doi.org/10.1520/MPC20170020. Acesso em: 07 out. 2025.
APA
Rêgo, G. C., Bandeira, R. M., Aureliano Junior, R. T., Lombardi, A. N., Casteletti, L. C., & Totten, G. E. (2017). Silica-based coatings for corrosion protection of AA7075 aluminum alloy. Materials Performance and Characterization. doi:10.1520/MPC20170020
NLM
Rêgo GC, Bandeira RM, Aureliano Junior RT, Lombardi AN, Casteletti LC, Totten GE. Silica-based coatings for corrosion protection of AA7075 aluminum alloy [Internet]. Materials Performance and Characterization. 2017 ;[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20170020
Vancouver
Rêgo GC, Bandeira RM, Aureliano Junior RT, Lombardi AN, Casteletti LC, Totten GE. Silica-based coatings for corrosion protection of AA7075 aluminum alloy [Internet]. Materials Performance and Characterization. 2017 ;[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20170020
Artigo de periodico
Wear behavior of a borided nickel-based self-fluxing thermal spray coating (2016)
Mariani, Fábio Edson ; Rêgo, Galtiere Corrêa ; Lombardi Neto, Amadeu ; Totten, George Edward ; Casteletti, Luiz Carlos
Source: Materials Performance and Characterization. Unidade: EESC
Subjects: DESGASTE DOS MATERIAIS, REVESTIMENTOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARIANI, Fábio Edson et al. Wear behavior of a borided nickel-based self-fluxing thermal spray coating. Materials Performance and Characterization, v. 5, n. 4, p. 414-422, 2016Tradução . . Disponível em: https://doi.org/10.1520/MPC20150064. Acesso em: 07 out. 2025.
APA
Mariani, F. E., Rêgo, G. C., Lombardi Neto, A., Totten, G. E., & Casteletti, L. C. (2016). Wear behavior of a borided nickel-based self-fluxing thermal spray coating. Materials Performance and Characterization, 5( 4), 414-422. doi:10.1520/MPC20150064
NLM
Mariani FE, Rêgo GC, Lombardi Neto A, Totten GE, Casteletti LC. Wear behavior of a borided nickel-based self-fluxing thermal spray coating [Internet]. Materials Performance and Characterization. 2016 ; 5( 4): 414-422.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20150064
Vancouver
Mariani FE, Rêgo GC, Lombardi Neto A, Totten GE, Casteletti LC. Wear behavior of a borided nickel-based self-fluxing thermal spray coating [Internet]. Materials Performance and Characterization. 2016 ; 5( 4): 414-422.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20150064
Artigo de periodico
Characterization of layers produced by boriding and boriding-PVD on AISI D2 tool steel (2016)
Pereira, Ricardo Gomes; Mariani, Fábio Edson ; Lombardi Neto, Amadeu ; Totten, George Edward ; Casteletti, Luiz Carlos
Source: Materials Performance and Characterization. Unidade: EESC
Subjects: AÇO FERRAMENTA, DESGASTE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Ricardo Gomes et al. Characterization of layers produced by boriding and boriding-PVD on AISI D2 tool steel. Materials Performance and Characterization, v. 5, n. 4, p. 406-413, 2016Tradução . . Disponível em: https://doi.org/10.1520/MPC20150067. Acesso em: 07 out. 2025.
APA
Pereira, R. G., Mariani, F. E., Lombardi Neto, A., Totten, G. E., & Casteletti, L. C. (2016). Characterization of layers produced by boriding and boriding-PVD on AISI D2 tool steel. Materials Performance and Characterization, 5( 4), 406-413. doi:10.1520/MPC20150067
NLM
Pereira RG, Mariani FE, Lombardi Neto A, Totten GE, Casteletti LC. Characterization of layers produced by boriding and boriding-PVD on AISI D2 tool steel [Internet]. Materials Performance and Characterization. 2016 ; 5( 4): 406-413.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20150067
Vancouver
Pereira RG, Mariani FE, Lombardi Neto A, Totten GE, Casteletti LC. Characterization of layers produced by boriding and boriding-PVD on AISI D2 tool steel [Internet]. Materials Performance and Characterization. 2016 ; 5( 4): 406-413.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20150067
Artigo de periodico
Low temperature plasma nitriding and nitrocarburising of a superaustenitic stainless steel (2016)
Fernandes, F. A. P.; Casteletti, Luiz Carlos ; Gallego, J
Source: Materials Performance and Characterization. Unidade: EESC
Subjects: AÇO INOXIDÁVEL AUSTENÍTICO, BAIXA TEMPERATURA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERNANDES, F. A. P. e CASTELETTI, Luiz Carlos e GALLEGO, J. Low temperature plasma nitriding and nitrocarburising of a superaustenitic stainless steel. Materials Performance and Characterization, v. 5, n. 5, p. 664-674, 2016Tradução . . Disponível em: https://doi.org/10.1520/MPC20160048. Acesso em: 07 out. 2025.
APA
Fernandes, F. A. P., Casteletti, L. C., & Gallego, J. (2016). Low temperature plasma nitriding and nitrocarburising of a superaustenitic stainless steel. Materials Performance and Characterization, 5( 5), 664-674. doi:10.1520/MPC20160048
NLM
Fernandes FAP, Casteletti LC, Gallego J. Low temperature plasma nitriding and nitrocarburising of a superaustenitic stainless steel [Internet]. Materials Performance and Characterization. 2016 ; 5( 5): 664-674.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20160048
Vancouver
Fernandes FAP, Casteletti LC, Gallego J. Low temperature plasma nitriding and nitrocarburising of a superaustenitic stainless steel [Internet]. Materials Performance and Characterization. 2016 ; 5( 5): 664-674.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20160048
Artigo de periodico
Comparative impact behavior of high-C steel after conventional quenching, tempering, and austempering (2016)
Vatavuk, Jan; Totten, George Edward; Nucci, José Eduardo; Albano, Luigi Leonardo Mazzucco; Canale, Lauralice de Campos Franceschini
Source: Materials Performance and Characterization. Unidade: EESC
Subjects: TRATAMENTO TÉRMICO, TENSÃO DOS MATERIAIS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
VATAVUK, Jan et al. Comparative impact behavior of high-C steel after conventional quenching, tempering, and austempering. Materials Performance and Characterization, v. 5, n. 1, p. 220-231, 2016Tradução . . Disponível em: https://doi.org/10.1520/MPC20150042. Acesso em: 07 out. 2025.
APA
Vatavuk, J., Totten, G. E., Nucci, J. E., Albano, L. L. M., & Canale, L. de C. F. (2016). Comparative impact behavior of high-C steel after conventional quenching, tempering, and austempering. Materials Performance and Characterization, 5( 1), 220-231. doi:10.1520/MPC20150042
NLM
Vatavuk J, Totten GE, Nucci JE, Albano LLM, Canale L de CF. Comparative impact behavior of high-C steel after conventional quenching, tempering, and austempering [Internet]. Materials Performance and Characterization. 2016 ; 5( 1): 220-231.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20150042
Vancouver
Vatavuk J, Totten GE, Nucci JE, Albano LLM, Canale L de CF. Comparative impact behavior of high-C steel after conventional quenching, tempering, and austempering [Internet]. Materials Performance and Characterization. 2016 ; 5( 1): 220-231.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20150042
Artigo de periodico
Influence of pack boriding on the wear and corrosion resistance of AISI H13 steel (2016)
Heck, Stênio Cristaldo; Lombardi Neto, Amadeu ; Picone, Carlos Alberto ; Totten, George Edward ; Casteletti, Luiz Carlos
Source: Materials Performance and Characterization. Unidade: EESC
Subjects: AÇO FERRAMENTA, DESGASTE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
HECK, Stênio Cristaldo et al. Influence of pack boriding on the wear and corrosion resistance of AISI H13 steel. Materials Performance and Characterization, v. 5, n. 1, p. 47-53, 2016Tradução . . Disponível em: https://doi.org/10.1520/MPC20150041. Acesso em: 07 out. 2025.
APA
Heck, S. C., Lombardi Neto, A., Picone, C. A., Totten, G. E., & Casteletti, L. C. (2016). Influence of pack boriding on the wear and corrosion resistance of AISI H13 steel. Materials Performance and Characterization, 5( 1), 47-53. doi:10.1520/MPC20150041
NLM
Heck SC, Lombardi Neto A, Picone CA, Totten GE, Casteletti LC. Influence of pack boriding on the wear and corrosion resistance of AISI H13 steel [Internet]. Materials Performance and Characterization. 2016 ; 5( 1): 47-53.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20150041
Vancouver
Heck SC, Lombardi Neto A, Picone CA, Totten GE, Casteletti LC. Influence of pack boriding on the wear and corrosion resistance of AISI H13 steel [Internet]. Materials Performance and Characterization. 2016 ; 5( 1): 47-53.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20150041
Artigo de periodico
A modified weibull stress approach to determine the reference temperature in a pressure vessel steel (2016)
Ruggieri, Claudio ; Dodds, R. H.
Source: Materials Performance and Characterization. Unidade: EP
Subjects: MECÂNICA DA FRATURA, TENSÃO DOS MATERIAIS, TENACIDADE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RUGGIERI, Claudio e DODDS, R. H. A modified weibull stress approach to determine the reference temperature in a pressure vessel steel. Materials Performance and Characterization, v. 5, n. 3, p. 260-279, 2016Tradução . . Disponível em: https://doi.org/10.1520/MPC20150035. Acesso em: 07 out. 2025.
APA
Ruggieri, C., & Dodds, R. H. (2016). A modified weibull stress approach to determine the reference temperature in a pressure vessel steel. Materials Performance and Characterization, 5( 3), 260-279. doi:10.1520/MPC20150035
NLM
Ruggieri C, Dodds RH. A modified weibull stress approach to determine the reference temperature in a pressure vessel steel [Internet]. Materials Performance and Characterization. 2016 ; 5( 3): 260-279.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20150035
Vancouver
Ruggieri C, Dodds RH. A modified weibull stress approach to determine the reference temperature in a pressure vessel steel [Internet]. Materials Performance and Characterization. 2016 ; 5( 3): 260-279.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20150035
Artigo de periodico
Fatigue crack growth behavior of friction stir welded 2024-T3 aluminum alloy tested under accelerated salt fog exposure (2014)
Milan, M T; Bose Filho, Waldek Wladimir ; Tarpani, José Ricardo
Source: Materials Performance and Characterization. Unidade: EESC
Subjects: LIGAS METÁLICAS, SOLDAGEM POR FRICÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MILAN, M T e BOSE FILHO, Waldek Wladimir e TARPANI, José Ricardo. Fatigue crack growth behavior of friction stir welded 2024-T3 aluminum alloy tested under accelerated salt fog exposure. Materials Performance and Characterization, v. 3, n. 3, p. se 2014, 2014Tradução . . Disponível em: https://doi.org/10.1520/MPC20130036. Acesso em: 07 out. 2025.
APA
Milan, M. T., Bose Filho, W. W., & Tarpani, J. R. (2014). Fatigue crack growth behavior of friction stir welded 2024-T3 aluminum alloy tested under accelerated salt fog exposure. Materials Performance and Characterization, 3( 3), se 2014. doi:10.1520/MPC20130036
NLM
Milan MT, Bose Filho WW, Tarpani JR. Fatigue crack growth behavior of friction stir welded 2024-T3 aluminum alloy tested under accelerated salt fog exposure [Internet]. Materials Performance and Characterization. 2014 ; 3( 3): se 2014.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20130036
Vancouver
Milan MT, Bose Filho WW, Tarpani JR. Fatigue crack growth behavior of friction stir welded 2024-T3 aluminum alloy tested under accelerated salt fog exposure [Internet]. Materials Performance and Characterization. 2014 ; 3( 3): se 2014.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20130036
Artigo de periodico
Vegetable oils as quenchants for steels: residual stresses and dimensional changes (2014)
Civera, C.; Rivolta, B.; Otero, Rosa Lucia Simencio; Lúcio, João Gilberto; Totten, George Edward; Canale, Lauralice de Campos Franceschini
Source: Materials Performance and Characterization. Unidade: EESC
Assunto: MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CIVERA, C. et al. Vegetable oils as quenchants for steels: residual stresses and dimensional changes. Materials Performance and Characterization, v. 3, n. 4, p. Paper MPC20140039 306-325, 2014Tradução . . Disponível em: https://doi.org/10.1520/MPC20140039. Acesso em: 07 out. 2025.
APA
Civera, C., Rivolta, B., Otero, R. L. S., Lúcio, J. G., Totten, G. E., & Canale, L. de C. F. (2014). Vegetable oils as quenchants for steels: residual stresses and dimensional changes. Materials Performance and Characterization, 3( 4), Paper MPC20140039 306-325. doi:10.1520/MPC20140039
NLM
Civera C, Rivolta B, Otero RLS, Lúcio JG, Totten GE, Canale L de CF. Vegetable oils as quenchants for steels: residual stresses and dimensional changes [Internet]. Materials Performance and Characterization. 2014 ; 3( 4): Paper MPC20140039 306-325.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20140039
Vancouver
Civera C, Rivolta B, Otero RLS, Lúcio JG, Totten GE, Canale L de CF. Vegetable oils as quenchants for steels: residual stresses and dimensional changes [Internet]. Materials Performance and Characterization. 2014 ; 3( 4): Paper MPC20140039 306-325.[citado 2025 out. 07 ] Available from: https://doi.org/10.1520/MPC20140039

USP Schools

ReP

Filtros

Authors

USP affiliated authors

Date published

Subjects

Funding Agencies

Indexado em

Non normalized affiliation

Countries of institutions of collaboration