ReP USP - Resultado da busca

Artigo de periodico
A new methodology for experimental analysis of single-cavity bubble’s nucleation, growth and detachment in saturated HFE-7100 (2024)
Martins, Ivan Talão; Fariñas Alvariño, Pablo; Cabezas Gómez, Luben
Fonte: Experimental Thermal and Fluid Science. Unidade: EESC
Assuntos: PROCESSAMENTO DE IMAGENS, ESCOAMENTO BIFÁSICO, TRANSFERÊNCIA DE CALOR, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTINS, Ivan Talão e FARIÑAS ALVARIÑO, Pablo e CABEZAS GÓMEZ, Luben. A new methodology for experimental analysis of single-cavity bubble’s nucleation, growth and detachment in saturated HFE-7100. Experimental Thermal and Fluid Science, v. 159, p. 1-18, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.expthermflusci.2024.111272. Acesso em: 25 set. 2024.
APA
Martins, I. T., Fariñas Alvariño, P., & Cabezas Gómez, L. (2024). A new methodology for experimental analysis of single-cavity bubble’s nucleation, growth and detachment in saturated HFE-7100. Experimental Thermal and Fluid Science, 159, 1-18. doi:10.1016/j.expthermflusci.2024.111272
NLM
Martins IT, Fariñas Alvariño P, Cabezas Gómez L. A new methodology for experimental analysis of single-cavity bubble’s nucleation, growth and detachment in saturated HFE-7100 [Internet]. Experimental Thermal and Fluid Science. 2024 ; 159 1-18.[citado 2024 set. 25 ] Available from: http://dx.doi.org/10.1016/j.expthermflusci.2024.111272
Vancouver
Martins IT, Fariñas Alvariño P, Cabezas Gómez L. A new methodology for experimental analysis of single-cavity bubble’s nucleation, growth and detachment in saturated HFE-7100 [Internet]. Experimental Thermal and Fluid Science. 2024 ; 159 1-18.[citado 2024 set. 25 ] Available from: http://dx.doi.org/10.1016/j.expthermflusci.2024.111272
Artigo de periodico
Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units (2024)
Martins, Ivan Talão; Fariñas Alvariño, Pablo; Cabezas Gómez, Luben
Fonte: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Assuntos: TRELIÇAS, FENÔMENOS DE TRANSPORTE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTINS, Ivan Talão e FARIÑAS ALVARIÑO, Pablo e CABEZAS GÓMEZ, Luben. Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 46, p. 1-28, 2024Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-024-04905-y. Acesso em: 25 set. 2024.
APA
Martins, I. T., Fariñas Alvariño, P., & Cabezas Gómez, L. (2024). Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46, 1-28. doi:10.1007/s40430-024-04905-y
NLM
Martins IT, Fariñas Alvariño P, Cabezas Gómez L. Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-28.[citado 2024 set. 25 ] Available from: https://dx.doi.org/10.1007/s40430-024-04905-y
Vancouver
Martins IT, Fariñas Alvariño P, Cabezas Gómez L. Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-28.[citado 2024 set. 25 ] Available from: https://dx.doi.org/10.1007/s40430-024-04905-y
Artigo de periodico
Influences of the workpiece material and the tool-surface engagement (TSE) on surface finishing when ball-end milling (2022)
Basso, Igor Fernando; Voigt, Rodrigo; Rodrigues, Alessandro Roger ; Marin, Felipe; Souza, Adriano Fagali de; López de Lacalle, Luis Norberto
Fonte: Journal of Manufacturing Processes. Unidade: EESC
Assuntos: FRESAGEM, RUGOSIDADE SUPERFICIAL, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BASSO, Igor Fernando et al. Influences of the workpiece material and the tool-surface engagement (TSE) on surface finishing when ball-end milling. Journal of Manufacturing Processes, v. 75, p. 219-231, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.jmapro.2021.12.059. Acesso em: 25 set. 2024.
APA
Basso, I. F., Voigt, R., Rodrigues, A. R., Marin, F., Souza, A. F. de, & López de Lacalle, L. N. (2022). Influences of the workpiece material and the tool-surface engagement (TSE) on surface finishing when ball-end milling. Journal of Manufacturing Processes, 75, 219-231. doi:10.1016/j.jmapro.2021.12.059
NLM
Basso IF, Voigt R, Rodrigues AR, Marin F, Souza AF de, López de Lacalle LN. Influences of the workpiece material and the tool-surface engagement (TSE) on surface finishing when ball-end milling [Internet]. Journal of Manufacturing Processes. 2022 ; 75 219-231.[citado 2024 set. 25 ] Available from: https://doi.org/10.1016/j.jmapro.2021.12.059
Vancouver
Basso IF, Voigt R, Rodrigues AR, Marin F, Souza AF de, López de Lacalle LN. Influences of the workpiece material and the tool-surface engagement (TSE) on surface finishing when ball-end milling [Internet]. Journal of Manufacturing Processes. 2022 ; 75 219-231.[citado 2024 set. 25 ] Available from: https://doi.org/10.1016/j.jmapro.2021.12.059
Artigo de periodico
On the width and mean value of bubble size distributions under subcooled flow boiling (2021)
Conde Fontenla, Marcos; Paz, Concepción; Concheiro, Miguel; Ribatski, Gherhardt
Fonte: Experimental Thermal and Fluid Science. Unidade: EESC
Assuntos: ENGENHARIA MECÂNICA, ESCOAMENTO BIFÁSICO, AERAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CONDE FONTENLA, Marcos et al. On the width and mean value of bubble size distributions under subcooled flow boiling. Experimental Thermal and Fluid Science, v. 124, p. 1-18, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.expthermflusci.2021.110368. Acesso em: 25 set. 2024.
APA
Conde Fontenla, M., Paz, C., Concheiro, M., & Ribatski, G. (2021). On the width and mean value of bubble size distributions under subcooled flow boiling. Experimental Thermal and Fluid Science, 124, 1-18. doi:10.1016/j.expthermflusci.2021.110368
NLM
Conde Fontenla M, Paz C, Concheiro M, Ribatski G. On the width and mean value of bubble size distributions under subcooled flow boiling [Internet]. Experimental Thermal and Fluid Science. 2021 ; 124 1-18.[citado 2024 set. 25 ] Available from: https://doi.org/10.1016/j.expthermflusci.2021.110368
Vancouver
Conde Fontenla M, Paz C, Concheiro M, Ribatski G. On the width and mean value of bubble size distributions under subcooled flow boiling [Internet]. Experimental Thermal and Fluid Science. 2021 ; 124 1-18.[citado 2024 set. 25 ] Available from: https://doi.org/10.1016/j.expthermflusci.2021.110368
Artigo de periodico
Self‑difusion in nanofuids of nonelongated particles in the dilute limit (2021)
Fariñas Alvariño, Pablo; Saiz Jabardo, José Maria; Cabezas Gómez, Luben
Fonte: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Assuntos: NANOPARTÍCULAS, ESCOAMENTO BIFÁSICO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FARIÑAS ALVARIÑO, Pablo e SAIZ JABARDO, José Maria e CABEZAS GÓMEZ, Luben. Self‑difusion in nanofuids of nonelongated particles in the dilute limit. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-18, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03101-6. Acesso em: 25 set. 2024.
APA
Fariñas Alvariño, P., Saiz Jabardo, J. M., & Cabezas Gómez, L. (2021). Self‑difusion in nanofuids of nonelongated particles in the dilute limit. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-18. doi:10.1007/s40430-021-03101-6
NLM
Fariñas Alvariño P, Saiz Jabardo JM, Cabezas Gómez L. Self‑difusion in nanofuids of nonelongated particles in the dilute limit [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-18.[citado 2024 set. 25 ] Available from: https://doi.org/10.1007/s40430-021-03101-6
Vancouver
Fariñas Alvariño P, Saiz Jabardo JM, Cabezas Gómez L. Self‑difusion in nanofuids of nonelongated particles in the dilute limit [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-18.[citado 2024 set. 25 ] Available from: https://doi.org/10.1007/s40430-021-03101-6
Artigo de periodico
Simulation of boiling heat transfer at different reduced temperatures with an improved pseudopotential lattice Boltzmann method (2020)
Guzella, Matheus dos Santos; Czelusniak, Luiz Eduardo; Mapelli, Vinicius Pessoa; Fariñas Alvariño, Pablo; Ribatski, Gherhardt ; Cabezas Gómez, Luben
Fonte: Symmetry. Unidade: EESC
Assuntos: ENGENHARIA MECÂNICA, TRANSFERÊNCIA DE CALOR
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GUZELLA, Matheus dos Santos et al. Simulation of boiling heat transfer at different reduced temperatures with an improved pseudopotential lattice Boltzmann method. Symmetry, v. 12, n. 8, p. 1-24, 2020Tradução . . Disponível em: https://doi.org/10.3390/sym12081358. Acesso em: 25 set. 2024.
APA
Guzella, M. dos S., Czelusniak, L. E., Mapelli, V. P., Fariñas Alvariño, P., Ribatski, G., & Cabezas Gómez, L. (2020). Simulation of boiling heat transfer at different reduced temperatures with an improved pseudopotential lattice Boltzmann method. Symmetry, 12( 8), 1-24. doi:10.3390/sym12081358
NLM
Guzella M dos S, Czelusniak LE, Mapelli VP, Fariñas Alvariño P, Ribatski G, Cabezas Gómez L. Simulation of boiling heat transfer at different reduced temperatures with an improved pseudopotential lattice Boltzmann method [Internet]. Symmetry. 2020 ; 12( 8): 1-24.[citado 2024 set. 25 ] Available from: https://doi.org/10.3390/sym12081358
Vancouver
Guzella M dos S, Czelusniak LE, Mapelli VP, Fariñas Alvariño P, Ribatski G, Cabezas Gómez L. Simulation of boiling heat transfer at different reduced temperatures with an improved pseudopotential lattice Boltzmann method [Internet]. Symmetry. 2020 ; 12( 8): 1-24.[citado 2024 set. 25 ] Available from: https://doi.org/10.3390/sym12081358
Artigo de periodico
Quasi-distributed torque and displacement sensing on a series elastic actuator’s spring using FBG arrays inscribed in CYTOP fibers (2019)
Leal-Junior, Arnaldo ; Theodosiou, Antreas ; Min, Rui ; Casas, Jonathan; Díaz, Camilo ; Santos, Wilian Miranda dos ; Pontes, Maria José ; Siqueira, Adriano Almeida Gonçalves ; Marques, Carlos ; Kalli, Kyriacos ; Frizera Neto, Anselmo
Fonte: IEEE Sensors Journal. Unidade: EESC
Assuntos: FILTROS DE KALMAN, SENSORES ÓPTICOS, FIBRA ÓPTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LEAL-JUNIOR, Arnaldo et al. Quasi-distributed torque and displacement sensing on a series elastic actuator’s spring using FBG arrays inscribed in CYTOP fibers. IEEE Sensors Journal, v. 19, n. ju 2019, p. 4054-4061, 2019Tradução . . Disponível em: https://doi.org/10.1109/JSEN.2019.2898722. Acesso em: 25 set. 2024.
APA
Leal-Junior, A., Theodosiou, A., Min, R., Casas, J., Díaz, C., Santos, W. M. dos, et al. (2019). Quasi-distributed torque and displacement sensing on a series elastic actuator’s spring using FBG arrays inscribed in CYTOP fibers. IEEE Sensors Journal, 19( ju 2019), 4054-4061. doi:10.1109/JSEN.2019.2898722
NLM
Leal-Junior A, Theodosiou A, Min R, Casas J, Díaz C, Santos WM dos, Pontes MJ, Siqueira AAG, Marques C, Kalli K, Frizera Neto A. Quasi-distributed torque and displacement sensing on a series elastic actuator’s spring using FBG arrays inscribed in CYTOP fibers [Internet]. IEEE Sensors Journal. 2019 ; 19( ju 2019): 4054-4061.[citado 2024 set. 25 ] Available from: https://doi.org/10.1109/JSEN.2019.2898722
Vancouver
Leal-Junior A, Theodosiou A, Min R, Casas J, Díaz C, Santos WM dos, Pontes MJ, Siqueira AAG, Marques C, Kalli K, Frizera Neto A. Quasi-distributed torque and displacement sensing on a series elastic actuator’s spring using FBG arrays inscribed in CYTOP fibers [Internet]. IEEE Sensors Journal. 2019 ; 19( ju 2019): 4054-4061.[citado 2024 set. 25 ] Available from: https://doi.org/10.1109/JSEN.2019.2898722
Artigo de periodico
Study of tool paths calculated by diferent commercial CAM systems and infuences on the real machining time and surface roughness for milling free-form geometries (2019)
Souza, Adriano Fagali de; Kasemodel, Rodrigo Berretta; Arias, Marcelo; Marin, Felipe; Rodrigues, Alessandro Roger
Fonte: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Assuntos: FERRAMENTAS, FRESAGEM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUZA, Adriano Fagali de et al. Study of tool paths calculated by diferent commercial CAM systems and infuences on the real machining time and surface roughness for milling free-form geometries. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 41, n. 363, p. 01-12, 2019Tradução . . Disponível em: https://doi.org/10.1007/s40430-019-1865-x. Acesso em: 25 set. 2024.
APA
Souza, A. F. de, Kasemodel, R. B., Arias, M., Marin, F., & Rodrigues, A. R. (2019). Study of tool paths calculated by diferent commercial CAM systems and infuences on the real machining time and surface roughness for milling free-form geometries. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41( 363), 01-12. doi:10.1007/s40430-019-1865-x
NLM
Souza AF de, Kasemodel RB, Arias M, Marin F, Rodrigues AR. Study of tool paths calculated by diferent commercial CAM systems and infuences on the real machining time and surface roughness for milling free-form geometries [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2019 ; 41( 363): 01-12.[citado 2024 set. 25 ] Available from: https://doi.org/10.1007/s40430-019-1865-x
Vancouver
Souza AF de, Kasemodel RB, Arias M, Marin F, Rodrigues AR. Study of tool paths calculated by diferent commercial CAM systems and infuences on the real machining time and surface roughness for milling free-form geometries [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2019 ; 41( 363): 01-12.[citado 2024 set. 25 ] Available from: https://doi.org/10.1007/s40430-019-1865-x
Artigo de periodico
Thermal performance of one-pass shell-and-tube heat exchangers in counter-flow (2019)
Magazoni, Felipe Costa; Cabezas Gómez, Luben ; Fariñas Alvariño, Pablo; Saiz Jabardo, José Maria
Fonte: Brazilian Journal of Chemical Engineering. Unidade: EESC
Assuntos: TROCADORES DE CALOR, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MAGAZONI, Felipe Costa et al. Thermal performance of one-pass shell-and-tube heat exchangers in counter-flow. Brazilian Journal of Chemical Engineering, v. 36, n. Apr.-Ju 2019, p. 869-883, 2019Tradução . . Disponível em: https://doi.org/10.1590/0104-6632.20190362s20180424. Acesso em: 25 set. 2024.
APA
Magazoni, F. C., Cabezas Gómez, L., Fariñas Alvariño, P., & Saiz Jabardo, J. M. (2019). Thermal performance of one-pass shell-and-tube heat exchangers in counter-flow. Brazilian Journal of Chemical Engineering, 36( Apr.-Ju 2019), 869-883. doi:10.1590/0104-6632.20190362s20180424
NLM
Magazoni FC, Cabezas Gómez L, Fariñas Alvariño P, Saiz Jabardo JM. Thermal performance of one-pass shell-and-tube heat exchangers in counter-flow [Internet]. Brazilian Journal of Chemical Engineering. 2019 ; 36( Apr.-Ju 2019): 869-883.[citado 2024 set. 25 ] Available from: https://doi.org/10.1590/0104-6632.20190362s20180424
Vancouver
Magazoni FC, Cabezas Gómez L, Fariñas Alvariño P, Saiz Jabardo JM. Thermal performance of one-pass shell-and-tube heat exchangers in counter-flow [Internet]. Brazilian Journal of Chemical Engineering. 2019 ; 36( Apr.-Ju 2019): 869-883.[citado 2024 set. 25 ] Available from: https://doi.org/10.1590/0104-6632.20190362s20180424
Artigo de periodico
Experimental investigation of the CHF of HFE-7100 under pool boiling conditions on differently roughened surfaces (2019)
Fariñas Alvariño, Pablo; Sánchez Simón, María Luisa; Guzella, Matheus dos Santos; Paz, Jose Manuel Amado; Saiz Jabardo, José Maria; Cabezas Gómez, Luben
Fonte: International Journal of Heat and Mass Transfer. Unidade: EESC
Assuntos: TRANSFERÊNCIA DE CALOR, ESCOAMENTO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FARIÑAS ALVARIÑO, Pablo et al. Experimental investigation of the CHF of HFE-7100 under pool boiling conditions on differently roughened surfaces. International Journal of Heat and Mass Transfer, v. 139, p. 269-279, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.ijheatmasstransfer.2019.04.142. Acesso em: 25 set. 2024.
APA
Fariñas Alvariño, P., Sánchez Simón, M. L., Guzella, M. dos S., Paz, J. M. A., Saiz Jabardo, J. M., & Cabezas Gómez, L. (2019). Experimental investigation of the CHF of HFE-7100 under pool boiling conditions on differently roughened surfaces. International Journal of Heat and Mass Transfer, 139, 269-279. doi:10.1016/j.ijheatmasstransfer.2019.04.142
NLM
Fariñas Alvariño P, Sánchez Simón ML, Guzella M dos S, Paz JMA, Saiz Jabardo JM, Cabezas Gómez L. Experimental investigation of the CHF of HFE-7100 under pool boiling conditions on differently roughened surfaces [Internet]. International Journal of Heat and Mass Transfer. 2019 ; 139 269-279.[citado 2024 set. 25 ] Available from: https://doi.org/10.1016/j.ijheatmasstransfer.2019.04.142
Vancouver
Fariñas Alvariño P, Sánchez Simón ML, Guzella M dos S, Paz JMA, Saiz Jabardo JM, Cabezas Gómez L. Experimental investigation of the CHF of HFE-7100 under pool boiling conditions on differently roughened surfaces [Internet]. International Journal of Heat and Mass Transfer. 2019 ; 139 269-279.[citado 2024 set. 25 ] Available from: https://doi.org/10.1016/j.ijheatmasstransfer.2019.04.142
Artigo de periodico
Experimental and numerical study of slightly loaded water alumina nanofluids in the developing region of a 1.1 mm in diameter pipe and convective enhancement evaluation (2017)
Moreira, Tiago Augusto; Fariñas Alvariño, Pablo; Cabezas Gómez, Luben ; Ribatski, Gherhardt
Fonte: International Journal of Heat and Mass Transfer. Unidade: EESC
Assuntos: NANOPARTÍCULAS, TRANSFERÊNCIA DE CALOR, ESCOAMENTO BIFÁSICO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOREIRA, Tiago Augusto et al. Experimental and numerical study of slightly loaded water alumina nanofluids in the developing region of a 1.1 mm in diameter pipe and convective enhancement evaluation. International Journal of Heat and Mass Transfer, v. 115, p. 317-335, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.ijheatmasstransfer.2017.08.028. Acesso em: 25 set. 2024.
APA
Moreira, T. A., Fariñas Alvariño, P., Cabezas Gómez, L., & Ribatski, G. (2017). Experimental and numerical study of slightly loaded water alumina nanofluids in the developing region of a 1.1 mm in diameter pipe and convective enhancement evaluation. International Journal of Heat and Mass Transfer, 115, 317-335. doi:10.1016/j.ijheatmasstransfer.2017.08.028
NLM
Moreira TA, Fariñas Alvariño P, Cabezas Gómez L, Ribatski G. Experimental and numerical study of slightly loaded water alumina nanofluids in the developing region of a 1.1 mm in diameter pipe and convective enhancement evaluation [Internet]. International Journal of Heat and Mass Transfer. 2017 ; 115 317-335.[citado 2024 set. 25 ] Available from: https://doi.org/10.1016/j.ijheatmasstransfer.2017.08.028
Vancouver
Moreira TA, Fariñas Alvariño P, Cabezas Gómez L, Ribatski G. Experimental and numerical study of slightly loaded water alumina nanofluids in the developing region of a 1.1 mm in diameter pipe and convective enhancement evaluation [Internet]. International Journal of Heat and Mass Transfer. 2017 ; 115 317-335.[citado 2024 set. 25 ] Available from: https://doi.org/10.1016/j.ijheatmasstransfer.2017.08.028
Artigo de periodico
Global Kalman filter approaches to estimate absolute angles of lower limb segments (2017)
Nogueira, Samuel Lourenço; Lambrecht, Stefan; Inoue, Roberto Santos; Bortole, Magdo; Montagnoli, Arlindo N.; Moreno, Juan Carlos; Rocon, Eduardo; Terra, Marco Henrique ; Siqueira, Adriano Almeida Gonçalves ; Pons, José L
Fonte: BioMedical Engineering OnLine. Unidade: EESC
Assuntos: PROCESSOS DE MARKOV, ROBÓTICA, FILTROS DE KALMAN
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
NOGUEIRA, Samuel Lourenço et al. Global Kalman filter approaches to estimate absolute angles of lower limb segments. BioMedical Engineering OnLine, v. 16, n. 58, p. 01-20, 2017Tradução . . Disponível em: https://doi.org/10.1186/s12938-017-0346-7. Acesso em: 25 set. 2024.
APA
Nogueira, S. L., Lambrecht, S., Inoue, R. S., Bortole, M., Montagnoli, A. N., Moreno, J. C., et al. (2017). Global Kalman filter approaches to estimate absolute angles of lower limb segments. BioMedical Engineering OnLine, 16( 58), 01-20. doi:10.1186/s12938-017-0346-7
NLM
Nogueira SL, Lambrecht S, Inoue RS, Bortole M, Montagnoli AN, Moreno JC, Rocon E, Terra MH, Siqueira AAG, Pons JL. Global Kalman filter approaches to estimate absolute angles of lower limb segments [Internet]. BioMedical Engineering OnLine. 2017 ; 16( 58): 01-20.[citado 2024 set. 25 ] Available from: https://doi.org/10.1186/s12938-017-0346-7
Vancouver
Nogueira SL, Lambrecht S, Inoue RS, Bortole M, Montagnoli AN, Moreno JC, Rocon E, Terra MH, Siqueira AAG, Pons JL. Global Kalman filter approaches to estimate absolute angles of lower limb segments [Internet]. BioMedical Engineering OnLine. 2017 ; 16( 58): 01-20.[citado 2024 set. 25 ] Available from: https://doi.org/10.1186/s12938-017-0346-7
Artigo de periodico
Inertial sensor error reduction through calibration and sensor fusion (2016)
Lambrecht, Stefan; Nogueira, Samuel Lourenço; Bortole, Magdo; Siqueira, Adriano Almeida Gonçalves; Terra, Marco Henrique; Rocon, Eduardo; Pons, José L.
Fonte: Sensors. Unidade: EESC
Assuntos: FILTROS DE KALMAN, BIOMECÂNICA, SISTEMAS MICROELETROMECÂNICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LAMBRECHT, Stefan et al. Inertial sensor error reduction through calibration and sensor fusion. Sensors, v. 16, n. 2, p. 1-16, 2016Tradução . . Disponível em: https://doi.org/10.3390/s16020235. Acesso em: 25 set. 2024.
APA
Lambrecht, S., Nogueira, S. L., Bortole, M., Siqueira, A. A. G., Terra, M. H., Rocon, E., & Pons, J. L. (2016). Inertial sensor error reduction through calibration and sensor fusion. Sensors, 16( 2), 1-16. doi:10.3390/s16020235
NLM
Lambrecht S, Nogueira SL, Bortole M, Siqueira AAG, Terra MH, Rocon E, Pons JL. Inertial sensor error reduction through calibration and sensor fusion [Internet]. Sensors. 2016 ; 16( 2): 1-16.[citado 2024 set. 25 ] Available from: https://doi.org/10.3390/s16020235
Vancouver
Lambrecht S, Nogueira SL, Bortole M, Siqueira AAG, Terra MH, Rocon E, Pons JL. Inertial sensor error reduction through calibration and sensor fusion [Internet]. Sensors. 2016 ; 16( 2): 1-16.[citado 2024 set. 25 ] Available from: https://doi.org/10.3390/s16020235
Artigo de periodico
Thermal mode for curing implantable silicone in the moulding process applied to tracheal stents (2015)
Freitas, Matheus Stoshy de; Serenó, Lídia; Silveira, Zilda de Castro; Silva, Jorge Vicente Lopes da; Ciurana, Joaquim
Fonte: Applied Thermal Engineering. Unidade: EESC
Assuntos: MÉTODO DOS ELEMENTOS FINITOS, ANÁLISE TÉRMICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FREITAS, Matheus Stoshy de et al. Thermal mode for curing implantable silicone in the moulding process applied to tracheal stents. Applied Thermal Engineering, v. 75, n. Ja 2015, p. 1001-1010, 2015Tradução . . Disponível em: https://doi.org/10.1016/j.applthermaleng.2014.10.053. Acesso em: 25 set. 2024.
APA
Freitas, M. S. de, Serenó, L., Silveira, Z. de C., Silva, J. V. L. da, & Ciurana, J. (2015). Thermal mode for curing implantable silicone in the moulding process applied to tracheal stents. Applied Thermal Engineering, 75( Ja 2015), 1001-1010. doi:10.1016/j.applthermaleng.2014.10.053
NLM
Freitas MS de, Serenó L, Silveira Z de C, Silva JVL da, Ciurana J. Thermal mode for curing implantable silicone in the moulding process applied to tracheal stents [Internet]. Applied Thermal Engineering. 2015 ; 75( Ja 2015): 1001-1010.[citado 2024 set. 25 ] Available from: https://doi.org/10.1016/j.applthermaleng.2014.10.053
Vancouver
Freitas MS de, Serenó L, Silveira Z de C, Silva JVL da, Ciurana J. Thermal mode for curing implantable silicone in the moulding process applied to tracheal stents [Internet]. Applied Thermal Engineering. 2015 ; 75( Ja 2015): 1001-1010.[citado 2024 set. 25 ] Available from: https://doi.org/10.1016/j.applthermaleng.2014.10.053
Trabalho de evento-anais periodico
New advances on tracheal stent manufacturing (2013)
Serenó, Lídia; Freitas, Matheus Stoshy de; Silveira, Zilda de Castro; Silva, Jorge Vicente Lopes da; Ciurana, Joaquim
Fonte: IFAC Proceedings Volumes. Nome do evento: IFAC Conference on Management and Control of Production and Logistics. Unidade: EESC
Assunto: CONTENEDORES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SERENÓ, Lídia et al. New advances on tracheal stent manufacturing. IFAC Proceedings Volumes. Kidlington: IFAC/Elsevier. Disponível em: https://doi.org/10.3182/20130911-3-BR-3021.00121. Acesso em: 25 set. 2024. , 2013
APA
Serenó, L., Freitas, M. S. de, Silveira, Z. de C., Silva, J. V. L. da, & Ciurana, J. (2013). New advances on tracheal stent manufacturing. IFAC Proceedings Volumes. Kidlington: IFAC/Elsevier. doi:10.3182/20130911-3-BR-3021.00121
NLM
Serenó L, Freitas MS de, Silveira Z de C, Silva JVL da, Ciurana J. New advances on tracheal stent manufacturing [Internet]. IFAC Proceedings Volumes. 2013 ; 46( 24): 344-349.[citado 2024 set. 25 ] Available from: https://doi.org/10.3182/20130911-3-BR-3021.00121
Vancouver
Serenó L, Freitas MS de, Silveira Z de C, Silva JVL da, Ciurana J. New advances on tracheal stent manufacturing [Internet]. IFAC Proceedings Volumes. 2013 ; 46( 24): 344-349.[citado 2024 set. 25 ] Available from: https://doi.org/10.3182/20130911-3-BR-3021.00121

Unidades USP

ReP

Filtros

Autores

Autores USP

Ano de publicação

Assuntos

Título da fonte

País de publicação

Agência de fomento

Indexado em

Afiliação dos autores externos não normalizada

País das instituições de afiliação dos autores externos