ReP USP - Resultado da busca

Artigo de periodico
Architecture drivers for trustworthy interoperability in industry 4.0 (2021)
Allian, Ana Paula ; Schnicke, Frank ; Antonino, Pablo Oliveira ; Rombach, Dieter; Nakagawa, Elisa Yumi
Source: IEEE Systems Journal. Unidade: ICMC
Subjects: INDÚSTRIA 4.0, REVISÃO SISTEMÁTICA, QUALIDADE DA PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALLIAN, Ana Paula et al. Architecture drivers for trustworthy interoperability in industry 4.0. IEEE Systems Journal, v. 15, n. 4, p. 5454-5463, 2021Tradução . . Disponível em: https://doi.org/10.1109/JSYST.2020.3041259. Acesso em: 03 nov. 2024.
APA
Allian, A. P., Schnicke, F., Antonino, P. O., Rombach, D., & Nakagawa, E. Y. (2021). Architecture drivers for trustworthy interoperability in industry 4.0. IEEE Systems Journal, 15( 4), 5454-5463. doi:10.1109/JSYST.2020.3041259
NLM
Allian AP, Schnicke F, Antonino PO, Rombach D, Nakagawa EY. Architecture drivers for trustworthy interoperability in industry 4.0 [Internet]. IEEE Systems Journal. 2021 ; 15( 4): 5454-5463.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1109/JSYST.2020.3041259
Vancouver
Allian AP, Schnicke F, Antonino PO, Rombach D, Nakagawa EY. Architecture drivers for trustworthy interoperability in industry 4.0 [Internet]. IEEE Systems Journal. 2021 ; 15( 4): 5454-5463.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1109/JSYST.2020.3041259
Artigo de periodico
Integrated lotsizing, scheduling and blending decisions in the spinning industry (2021)
Camargo, Victor Claudio Bento de ; Almada-Lobo, Bernardo ; Toledo, Franklina Maria Bragion de
Source: Pesquisa Operacional. Unidade: ICMC
Subjects: QUALIDADE DA PRODUÇÃO, COMPUTAÇÃO APLICADA, TOMADA DE DECISÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAMARGO, Victor Claudio Bento de e ALMADA-LOBO, Bernardo e TOLEDO, Franklina Maria Bragion de. Integrated lotsizing, scheduling and blending decisions in the spinning industry. Pesquisa Operacional, v. 41, p. 1-26, 2021Tradução . . Disponível em: https://doi.org/10.1590/0101-7438.2021.041s1.00233486. Acesso em: 03 nov. 2024.
APA
Camargo, V. C. B. de, Almada-Lobo, B., & Toledo, F. M. B. de. (2021). Integrated lotsizing, scheduling and blending decisions in the spinning industry. Pesquisa Operacional, 41, 1-26. doi:10.1590/0101-7438.2021.041s1.00233486
NLM
Camargo VCB de, Almada-Lobo B, Toledo FMB de. Integrated lotsizing, scheduling and blending decisions in the spinning industry [Internet]. Pesquisa Operacional. 2021 ; 41 1-26.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1590/0101-7438.2021.041s1.00233486
Vancouver
Camargo VCB de, Almada-Lobo B, Toledo FMB de. Integrated lotsizing, scheduling and blending decisions in the spinning industry [Internet]. Pesquisa Operacional. 2021 ; 41 1-26.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1590/0101-7438.2021.041s1.00233486
Artigo de periodico
Optimizing distributed no-wait flow shop scheduling problem with setup times and maintenance operations via iterated greedy algorithm (2021)
Miyata, Hugo Hissashi; Nagano, Marcelo Seido
Source: Journal of Manufacturing Systems. Unidade: EESC
Subjects: PROGRAMAÇÃO DA PRODUÇÃO, QUALIDADE DA PRODUÇÃO, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MIYATA, Hugo Hissashi e NAGANO, Marcelo Seido. Optimizing distributed no-wait flow shop scheduling problem with setup times and maintenance operations via iterated greedy algorithm. Journal of Manufacturing Systems, v. 61, p. 592-612, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.jmsy.2021.10.005. Acesso em: 03 nov. 2024.
APA
Miyata, H. H., & Nagano, M. S. (2021). Optimizing distributed no-wait flow shop scheduling problem with setup times and maintenance operations via iterated greedy algorithm. Journal of Manufacturing Systems, 61, 592-612. doi:10.1016/j.jmsy.2021.10.005
NLM
Miyata HH, Nagano MS. Optimizing distributed no-wait flow shop scheduling problem with setup times and maintenance operations via iterated greedy algorithm [Internet]. Journal of Manufacturing Systems. 2021 ; 61 592-612.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1016/j.jmsy.2021.10.005
Vancouver
Miyata HH, Nagano MS. Optimizing distributed no-wait flow shop scheduling problem with setup times and maintenance operations via iterated greedy algorithm [Internet]. Journal of Manufacturing Systems. 2021 ; 61 592-612.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1016/j.jmsy.2021.10.005
Artigo de periodico
Elimination of final dimensional inspection with R & R application: a case study (2018)
Dias, Marcus Vinicius Souza; Giacaglia, Giorgio E. O.
Source: Engineering Research Technical Reports. Unidade: EP
Subjects: QUALIDADE DA PRODUÇÃO, CUSTO ECONÔMICO, FERROVIAS, MEDIÇÃO MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DIAS, Marcus Vinicius Souza e GIACAGLIA, Giorgio E. O. Elimination of final dimensional inspection with R & R application: a case study. Engineering Research Technical Reports, v. 9, n. 4, p. 1-14, 2018Tradução . . Disponível em: https://doi.org/10.32426/engresv9n4-002. Acesso em: 03 nov. 2024.
APA
Dias, M. V. S., & Giacaglia, G. E. O. (2018). Elimination of final dimensional inspection with R & R application: a case study. Engineering Research Technical Reports, 9( 4), 1-14. doi:10.32426/engresv9n4-002
NLM
Dias MVS, Giacaglia GEO. Elimination of final dimensional inspection with R & R application: a case study [Internet]. Engineering Research Technical Reports. 2018 ; 9( 4): 1-14.[citado 2024 nov. 03 ] Available from: https://doi.org/10.32426/engresv9n4-002
Vancouver
Dias MVS, Giacaglia GEO. Elimination of final dimensional inspection with R & R application: a case study [Internet]. Engineering Research Technical Reports. 2018 ; 9( 4): 1-14.[citado 2024 nov. 03 ] Available from: https://doi.org/10.32426/engresv9n4-002
Artigo de periodico
Cost reduction with rework of rejected lots in a cellular plant with use of six sigma methodology (2017)
Giacaglia, Giorgio E. O. ; Faria, Sergio Henrique de
Source: Engineering Research Technical Reports. Unidade: EP
Subjects: QUALIDADE DA PRODUÇÃO, QUALIDADE DO PROCESSO, SATISFAÇÃO DO CONSUMIDOR
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GIACAGLIA, Giorgio E. O. e FARIA, Sergio Henrique de. Cost reduction with rework of rejected lots in a cellular plant with use of six sigma methodology. Engineering Research Technical Reports, v. 8, n. ja 2017, p. 1-18, 2017Tradução . . Disponível em: https://doi.org/10.32426/engresv8n1-002. Acesso em: 03 nov. 2024.
APA
Giacaglia, G. E. O., & Faria, S. H. de. (2017). Cost reduction with rework of rejected lots in a cellular plant with use of six sigma methodology. Engineering Research Technical Reports, 8( ja 2017), 1-18. doi:10.32426/engresv8n1-002
NLM
Giacaglia GEO, Faria SH de. Cost reduction with rework of rejected lots in a cellular plant with use of six sigma methodology [Internet]. Engineering Research Technical Reports. 2017 ; 8( ja 2017): 1-18.[citado 2024 nov. 03 ] Available from: https://doi.org/10.32426/engresv8n1-002
Vancouver
Giacaglia GEO, Faria SH de. Cost reduction with rework of rejected lots in a cellular plant with use of six sigma methodology [Internet]. Engineering Research Technical Reports. 2017 ; 8( ja 2017): 1-18.[citado 2024 nov. 03 ] Available from: https://doi.org/10.32426/engresv8n1-002
Artigo de periodico
Kaizen tools for productivity emprovement: a real case (2016)
Almeida, Wallace de; Giacaglia, Giorgio E. O. ; Lamas, Wendell de Queiroz; Bargos, Fabiano Fernandes
Source: Engineering Research Technical Reports. Unidades: EP, EEL
Subjects: ADMINISTRAÇÃO DA QUALIDADE, QUALIDADE DA PRODUÇÃO, MÉTODOS PARA MELHORIA DA PRODUTIVIDADE, LINHA DE MONTAGEM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALMEIDA, Wallace de et al. Kaizen tools for productivity emprovement: a real case. Engineering Research Technical Reports, v. 7, n. 2, p. 1-29, 2016Tradução . . Disponível em: https://doi.org/10.32426/engresv6n4-001. Acesso em: 03 nov. 2024.
APA
Almeida, W. de, Giacaglia, G. E. O., Lamas, W. de Q., & Bargos, F. F. (2016). Kaizen tools for productivity emprovement: a real case. Engineering Research Technical Reports, 7( 2), 1-29. doi:10.32426/engresv6n4-001
NLM
Almeida W de, Giacaglia GEO, Lamas W de Q, Bargos FF. Kaizen tools for productivity emprovement: a real case [Internet]. Engineering Research Technical Reports. 2016 ; 7( 2): 1-29.[citado 2024 nov. 03 ] Available from: https://doi.org/10.32426/engresv6n4-001
Vancouver
Almeida W de, Giacaglia GEO, Lamas W de Q, Bargos FF. Kaizen tools for productivity emprovement: a real case [Internet]. Engineering Research Technical Reports. 2016 ; 7( 2): 1-29.[citado 2024 nov. 03 ] Available from: https://doi.org/10.32426/engresv6n4-001
Artigo de periodico
Proposal of a new method for effectiveness evaluation in the product design and development process (2011)
Caminada Netto, Adherbal; Kaminski, Paulo Carlos
Source: Produção. Unidade: EP
Subjects: QUALIDADE DA PRODUÇÃO, DESENVOLVIMENTO DE PRODUTOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAMINADA NETTO, Adherbal e KAMINSKI, Paulo Carlos. Proposal of a new method for effectiveness evaluation in the product design and development process. Produção, v. 21, n. 3, p. 367-378, 2011Tradução . . Disponível em: https://doi.org/10.1590/s0103-65132011005000034. Acesso em: 03 nov. 2024.
APA
Caminada Netto, A., & Kaminski, P. C. (2011). Proposal of a new method for effectiveness evaluation in the product design and development process. Produção, 21( 3), 367-378. doi:10.1590/s0103-65132011005000034
NLM
Caminada Netto A, Kaminski PC. Proposal of a new method for effectiveness evaluation in the product design and development process [Internet]. Produção. 2011 ; 21( 3): 367-378.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1590/s0103-65132011005000034
Vancouver
Caminada Netto A, Kaminski PC. Proposal of a new method for effectiveness evaluation in the product design and development process [Internet]. Produção. 2011 ; 21( 3): 367-378.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1590/s0103-65132011005000034
Artigo de periodico
Systematics for development of dimensional characteristics of automotive industry products (2010)
Housch, Erich; Kaminski, Paulo Carlos
Source: Product: management & development. Unidade: EP
Subjects: DESENVOLVIMENTO DE PRODUTOS, QUALIDADE DA PRODUÇÃO, GESTÃO DE PROJETOS, INDÚSTRIA AUTOMOBILÍSTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
HOUSCH, Erich e KAMINSKI, Paulo Carlos. Systematics for development of dimensional characteristics of automotive industry products. Product: management & development, v. 8, n. 2, p. 93-109, 2010Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/3593a798-0f5d-411f-baf9-3fb0b6d14115/Kaminski-2010-Systematics%20for%20development%20of%20dimensional%20characteristics%20ok.pdf. Acesso em: 03 nov. 2024.
APA
Housch, E., & Kaminski, P. C. (2010). Systematics for development of dimensional characteristics of automotive industry products. Product: management & development, 8( 2), 93-109. Recuperado de https://repositorio.usp.br/directbitstream/3593a798-0f5d-411f-baf9-3fb0b6d14115/Kaminski-2010-Systematics%20for%20development%20of%20dimensional%20characteristics%20ok.pdf
NLM
Housch E, Kaminski PC. Systematics for development of dimensional characteristics of automotive industry products [Internet]. Product: management & development. 2010 ; 8( 2): 93-109.[citado 2024 nov. 03 ] Available from: https://repositorio.usp.br/directbitstream/3593a798-0f5d-411f-baf9-3fb0b6d14115/Kaminski-2010-Systematics%20for%20development%20of%20dimensional%20characteristics%20ok.pdf
Vancouver
Housch E, Kaminski PC. Systematics for development of dimensional characteristics of automotive industry products [Internet]. Product: management & development. 2010 ; 8( 2): 93-109.[citado 2024 nov. 03 ] Available from: https://repositorio.usp.br/directbitstream/3593a798-0f5d-411f-baf9-3fb0b6d14115/Kaminski-2010-Systematics%20for%20development%20of%20dimensional%20characteristics%20ok.pdf
Trabalho de evento
Co-desenvolvimento de produtos com foco em redução de custos: a importância da participação dos fornecedores em projetos na indústria automotiva (2010)
Candido, Guido Muzio ; Kaminski, Paulo Carlos
Source: Anais. Conference titles: Congresso Nacional de Engenharia Mecânica - CONEM. Unidade: EP
Subjects: PROJETO AUTOMOTIVO, CUSTO INDUSTRIAL (REDUÇÃO), QUALIDADE DA PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CANDIDO, Guido Muzio e KAMINSKI, Paulo Carlos. Co-desenvolvimento de produtos com foco em redução de custos: a importância da participação dos fornecedores em projetos na indústria automotiva. 2010, Anais.. Rio de Janeiro: ABCM, 2010. Disponível em: https://repositorio.usp.br/directbitstream/8d176972-c13e-45b4-b3c6-6025d9cfa80f/Kaminski-2010-Co-desenvolvimento%20de%20produtos%20com%20foco%20em%20redu%C3%A7%C3%A3o%20de%20custos%20%20a%20import%C3%A2ncia%20da%20participa%C3%A7%C3%A3o%20ok.pdf. Acesso em: 03 nov. 2024.
APA
Candido, G. M., & Kaminski, P. C. (2010). Co-desenvolvimento de produtos com foco em redução de custos: a importância da participação dos fornecedores em projetos na indústria automotiva. In Anais. Rio de Janeiro: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/8d176972-c13e-45b4-b3c6-6025d9cfa80f/Kaminski-2010-Co-desenvolvimento%20de%20produtos%20com%20foco%20em%20redu%C3%A7%C3%A3o%20de%20custos%20%20a%20import%C3%A2ncia%20da%20participa%C3%A7%C3%A3o%20ok.pdf
NLM
Candido GM, Kaminski PC. Co-desenvolvimento de produtos com foco em redução de custos: a importância da participação dos fornecedores em projetos na indústria automotiva [Internet]. Anais. 2010 ;[citado 2024 nov. 03 ] Available from: https://repositorio.usp.br/directbitstream/8d176972-c13e-45b4-b3c6-6025d9cfa80f/Kaminski-2010-Co-desenvolvimento%20de%20produtos%20com%20foco%20em%20redu%C3%A7%C3%A3o%20de%20custos%20%20a%20import%C3%A2ncia%20da%20participa%C3%A7%C3%A3o%20ok.pdf
Vancouver
Candido GM, Kaminski PC. Co-desenvolvimento de produtos com foco em redução de custos: a importância da participação dos fornecedores em projetos na indústria automotiva [Internet]. Anais. 2010 ;[citado 2024 nov. 03 ] Available from: https://repositorio.usp.br/directbitstream/8d176972-c13e-45b4-b3c6-6025d9cfa80f/Kaminski-2010-Co-desenvolvimento%20de%20produtos%20com%20foco%20em%20redu%C3%A7%C3%A3o%20de%20custos%20%20a%20import%C3%A2ncia%20da%20participa%C3%A7%C3%A3o%20ok.pdf
Artigo de periodico
Integrated product and process system with continuous improvement in the auto parts industry (2009)
Silva, Iris Bento da; Batalha, Gilmar Ferreira ; Stipkovic Filho, Marco; Ceccarelli, Fernando Zaramella; Anjos, João Batista; Fesz, Marcin
Source: Journal of Achievements in Materials and Manufacturing Engineering. Unidade: EP
Subjects: QUALIDADE DA PRODUÇÃO, INDÚSTRIA AUTOMOBILÍSTICA, ENGENHARIA AUTOMOTIVA, CIM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Iris Bento da et al. Integrated product and process system with continuous improvement in the auto parts industry. Journal of Achievements in Materials and Manufacturing Engineering, v. 34, n. Ju2009, p. 204-213, 2009Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/b17d2756-88bf-40e2-9d9b-d0553ba03e60/Stipkovic-2009-Integrated%20product%20and%20process%20system%20with%20continuous%20improvement%20in%20the%20auto%20parts%20industry.pdf. Acesso em: 03 nov. 2024.
APA
Silva, I. B. da, Batalha, G. F., Stipkovic Filho, M., Ceccarelli, F. Z., Anjos, J. B., & Fesz, M. (2009). Integrated product and process system with continuous improvement in the auto parts industry. Journal of Achievements in Materials and Manufacturing Engineering, 34( Ju2009), 204-213. Recuperado de https://repositorio.usp.br/directbitstream/b17d2756-88bf-40e2-9d9b-d0553ba03e60/Stipkovic-2009-Integrated%20product%20and%20process%20system%20with%20continuous%20improvement%20in%20the%20auto%20parts%20industry.pdf
NLM
Silva IB da, Batalha GF, Stipkovic Filho M, Ceccarelli FZ, Anjos JB, Fesz M. Integrated product and process system with continuous improvement in the auto parts industry [Internet]. Journal of Achievements in Materials and Manufacturing Engineering. 2009 ; 34( Ju2009): 204-213.[citado 2024 nov. 03 ] Available from: https://repositorio.usp.br/directbitstream/b17d2756-88bf-40e2-9d9b-d0553ba03e60/Stipkovic-2009-Integrated%20product%20and%20process%20system%20with%20continuous%20improvement%20in%20the%20auto%20parts%20industry.pdf
Vancouver
Silva IB da, Batalha GF, Stipkovic Filho M, Ceccarelli FZ, Anjos JB, Fesz M. Integrated product and process system with continuous improvement in the auto parts industry [Internet]. Journal of Achievements in Materials and Manufacturing Engineering. 2009 ; 34( Ju2009): 204-213.[citado 2024 nov. 03 ] Available from: https://repositorio.usp.br/directbitstream/b17d2756-88bf-40e2-9d9b-d0553ba03e60/Stipkovic-2009-Integrated%20product%20and%20process%20system%20with%20continuous%20improvement%20in%20the%20auto%20parts%20industry.pdf
Trabalho de evento-resumo
Integrated product and process system with continuous improvement in the auto parts industry (2009)
Silva, Iris Bento da; Batalha, Gilmar Ferreira ; Stipkovic Filho, Marco; Ceccarelli, Fernando Zaramella; Anjos, João Batista; Fesz, Marcin
Source: Comment' 09. Conference titles: Worldwide Congress on Materials and Manufacturing Engineering Technology. Unidade: EP
Subjects: QUALIDADE DA PRODUÇÃO, INDÚSTRIA AUTOMOBILÍSTICA, ENGENHARIA AUTOMOTIVA, CIM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Iris Bento da et al. Integrated product and process system with continuous improvement in the auto parts industry. 2009, Anais.. Gliwice: s.n., 2009. Disponível em: https://repositorio.usp.br/directbitstream/d7a30d12-1f19-4f4d-a733-f37b4fe653ce/Stipkovic-2009-integrated%20product%20and%20process.pdf. Acesso em: 03 nov. 2024.
APA
Silva, I. B. da, Batalha, G. F., Stipkovic Filho, M., Ceccarelli, F. Z., Anjos, J. B., & Fesz, M. (2009). Integrated product and process system with continuous improvement in the auto parts industry. In Comment' 09. Gliwice: s.n. Recuperado de https://repositorio.usp.br/directbitstream/d7a30d12-1f19-4f4d-a733-f37b4fe653ce/Stipkovic-2009-integrated%20product%20and%20process.pdf
NLM
Silva IB da, Batalha GF, Stipkovic Filho M, Ceccarelli FZ, Anjos JB, Fesz M. Integrated product and process system with continuous improvement in the auto parts industry [Internet]. Comment' 09. 2009 ;[citado 2024 nov. 03 ] Available from: https://repositorio.usp.br/directbitstream/d7a30d12-1f19-4f4d-a733-f37b4fe653ce/Stipkovic-2009-integrated%20product%20and%20process.pdf
Vancouver
Silva IB da, Batalha GF, Stipkovic Filho M, Ceccarelli FZ, Anjos JB, Fesz M. Integrated product and process system with continuous improvement in the auto parts industry [Internet]. Comment' 09. 2009 ;[citado 2024 nov. 03 ] Available from: https://repositorio.usp.br/directbitstream/d7a30d12-1f19-4f4d-a733-f37b4fe653ce/Stipkovic-2009-integrated%20product%20and%20process.pdf
Artigo de periodico
Automotive body-in-white dimensional stability through pre-control application in the subassembly process (2008)
Sanches Junior, Leonardo Marto; Stipkovic Filho, Marco; Batalha, Gilmar Ferreira
Source: Journal of Achievements in Materials and Manufacturing Engineering. Unidade: EP
Subjects: MANUFATURA, ENGENHARIA AUTOMOTIVA, CUSTO DE OPERAÇÕES, QUALIDADE DA PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANCHES JUNIOR, Leonardo Marto e STIPKOVIC FILHO, Marco e BATALHA, Gilmar Ferreira. Automotive body-in-white dimensional stability through pre-control application in the subassembly process. Journal of Achievements in Materials and Manufacturing Engineering, v. 31, n. 2, p. 705-711, 2008Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/906ed869-7563-4f6a-a461-c93a12e01614/Batalha-2008-Automotive%20body-in-white%20dimensional%20ok.pdf. Acesso em: 03 nov. 2024.
APA
Sanches Junior, L. M., Stipkovic Filho, M., & Batalha, G. F. (2008). Automotive body-in-white dimensional stability through pre-control application in the subassembly process. Journal of Achievements in Materials and Manufacturing Engineering, 31( 2), 705-711. Recuperado de https://repositorio.usp.br/directbitstream/906ed869-7563-4f6a-a461-c93a12e01614/Batalha-2008-Automotive%20body-in-white%20dimensional%20ok.pdf
NLM
Sanches Junior LM, Stipkovic Filho M, Batalha GF. Automotive body-in-white dimensional stability through pre-control application in the subassembly process [Internet]. Journal of Achievements in Materials and Manufacturing Engineering. 2008 ; 31( 2): 705-711.[citado 2024 nov. 03 ] Available from: https://repositorio.usp.br/directbitstream/906ed869-7563-4f6a-a461-c93a12e01614/Batalha-2008-Automotive%20body-in-white%20dimensional%20ok.pdf
Vancouver
Sanches Junior LM, Stipkovic Filho M, Batalha GF. Automotive body-in-white dimensional stability through pre-control application in the subassembly process [Internet]. Journal of Achievements in Materials and Manufacturing Engineering. 2008 ; 31( 2): 705-711.[citado 2024 nov. 03 ] Available from: https://repositorio.usp.br/directbitstream/906ed869-7563-4f6a-a461-c93a12e01614/Batalha-2008-Automotive%20body-in-white%20dimensional%20ok.pdf
Artigo de periodico
Concurrent engineering and DFMA approaches on the developement of automotive panels and doors (2008)
Krumenauer, Fábio Zuchetto; Matayoshi, César Takao; Silva, Iris Bento da; Stipkovic Filho, Marco; Batalha, Gilmar Ferreira
Source: Journal of Achievements in Materials and Manufacturing Engineering. Unidade: EP
Subjects: INDÚSTRIA AUTOMOBILÍSTICA, PROCESSOS DE FABRICAÇÃO (ENGENHARIA MECÂNICA), ENGENHARIA AUTOMOTIVA, DESENVOLVIMENTO DE PRODUTOS, QUALIDADE DA PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
KRUMENAUER, Fábio Zuchetto et al. Concurrent engineering and DFMA approaches on the developement of automotive panels and doors. Journal of Achievements in Materials and Manufacturing Engineering, v. 31, n. 2, p. 690-698, 2008Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/d4fccade-e6c9-441f-8f14-4b0365f44729/Batalha-2008-Concurrent%20engineering%20and%20DFMA%20approaches%20ok.pdf. Acesso em: 03 nov. 2024.
APA
Krumenauer, F. Z., Matayoshi, C. T., Silva, I. B. da, Stipkovic Filho, M., & Batalha, G. F. (2008). Concurrent engineering and DFMA approaches on the developement of automotive panels and doors. Journal of Achievements in Materials and Manufacturing Engineering, 31( 2), 690-698. Recuperado de https://repositorio.usp.br/directbitstream/d4fccade-e6c9-441f-8f14-4b0365f44729/Batalha-2008-Concurrent%20engineering%20and%20DFMA%20approaches%20ok.pdf
NLM
Krumenauer FZ, Matayoshi CT, Silva IB da, Stipkovic Filho M, Batalha GF. Concurrent engineering and DFMA approaches on the developement of automotive panels and doors [Internet]. Journal of Achievements in Materials and Manufacturing Engineering. 2008 ; 31( 2): 690-698.[citado 2024 nov. 03 ] Available from: https://repositorio.usp.br/directbitstream/d4fccade-e6c9-441f-8f14-4b0365f44729/Batalha-2008-Concurrent%20engineering%20and%20DFMA%20approaches%20ok.pdf
Vancouver
Krumenauer FZ, Matayoshi CT, Silva IB da, Stipkovic Filho M, Batalha GF. Concurrent engineering and DFMA approaches on the developement of automotive panels and doors [Internet]. Journal of Achievements in Materials and Manufacturing Engineering. 2008 ; 31( 2): 690-698.[citado 2024 nov. 03 ] Available from: https://repositorio.usp.br/directbitstream/d4fccade-e6c9-441f-8f14-4b0365f44729/Batalha-2008-Concurrent%20engineering%20and%20DFMA%20approaches%20ok.pdf
Artigo de periodico
Product value optimisation engineering applied to current component designs: a case study from the Brazilian automotive industry (2008)
Candido, Guido Muzio ; Kaminski, Paulo Carlos
Source: International Journal of Automotive Technology and Management. Unidade: EP
Subjects: INDÚSTRIA AUTOMOBILÍSTICA, DESENVOLVIMENTO DE PRODUTOS (OTIMIZAÇÃO), CUSTO ECONÔMICO (REDUÇÃO), QUALIDADE DA PRODUÇÃO, GARANTIA DA QUALIDADE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CANDIDO, Guido Muzio e KAMINSKI, Paulo Carlos. Product value optimisation engineering applied to current component designs: a case study from the Brazilian automotive industry. International Journal of Automotive Technology and Management, v. 8, n. 3, p. 270-296, 2008Tradução . . Disponível em: https://doi.org/10.1504/ijatm.2008.020213. Acesso em: 03 nov. 2024.
APA
Candido, G. M., & Kaminski, P. C. (2008). Product value optimisation engineering applied to current component designs: a case study from the Brazilian automotive industry. International Journal of Automotive Technology and Management, 8( 3), 270-296. doi:10.1504/ijatm.2008.020213
NLM
Candido GM, Kaminski PC. Product value optimisation engineering applied to current component designs: a case study from the Brazilian automotive industry [Internet]. International Journal of Automotive Technology and Management. 2008 ; 8( 3): 270-296.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1504/ijatm.2008.020213
Vancouver
Candido GM, Kaminski PC. Product value optimisation engineering applied to current component designs: a case study from the Brazilian automotive industry [Internet]. International Journal of Automotive Technology and Management. 2008 ; 8( 3): 270-296.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1504/ijatm.2008.020213
Trabalho de evento
Assessing the quality of product design from the designer's point of view: the case of a global automotive supplier (2007)
Caminada Netto, Adherbal; Kaminski, Paulo Carlos
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EP
Subjects: ENGENHARIA AUTOMOTIVA, PROJETOS DE PRODUTOS, DESENVOLVIMENTO DE PRODUTOS, QUALIDADE DA PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAMINADA NETTO, Adherbal e KAMINSKI, Paulo Carlos. Assessing the quality of product design from the designer's point of view: the case of a global automotive supplier. 2007, Anais.. Brasília: ABCM, 2007. Disponível em: https://repositorio.usp.br/directbitstream/7e803a9c-cbf5-44ac-835f-17b846b3feed/Kaminski-2007-Assessing%20the%20quality%20of%20product%20design%20from%20the%20designer%E2%80%99s%20point%20of%20view%20%20the%20case%20of%20a%20global%20ok.pdf. Acesso em: 03 nov. 2024.
APA
Caminada Netto, A., & Kaminski, P. C. (2007). Assessing the quality of product design from the designer's point of view: the case of a global automotive supplier. In Proceedings of COBEM. Brasília: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/7e803a9c-cbf5-44ac-835f-17b846b3feed/Kaminski-2007-Assessing%20the%20quality%20of%20product%20design%20from%20the%20designer%E2%80%99s%20point%20of%20view%20%20the%20case%20of%20a%20global%20ok.pdf
NLM
Caminada Netto A, Kaminski PC. Assessing the quality of product design from the designer's point of view: the case of a global automotive supplier [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 nov. 03 ] Available from: https://repositorio.usp.br/directbitstream/7e803a9c-cbf5-44ac-835f-17b846b3feed/Kaminski-2007-Assessing%20the%20quality%20of%20product%20design%20from%20the%20designer%E2%80%99s%20point%20of%20view%20%20the%20case%20of%20a%20global%20ok.pdf
Vancouver
Caminada Netto A, Kaminski PC. Assessing the quality of product design from the designer's point of view: the case of a global automotive supplier [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 nov. 03 ] Available from: https://repositorio.usp.br/directbitstream/7e803a9c-cbf5-44ac-835f-17b846b3feed/Kaminski-2007-Assessing%20the%20quality%20of%20product%20design%20from%20the%20designer%E2%80%99s%20point%20of%20view%20%20the%20case%20of%20a%20global%20ok.pdf
Trabalho de evento
Assessing the quality of product design from the designer's point of view (2005)
Caminada Netto, Adherbal; Kaminski, Paulo Carlos
Source: COBEM 2005 : proceedings. Conference titles: International Congress of Mechanical Engineering. Unidade: EP
Subjects: DESENVOLVIMENTO DE PRODUTOS, QUALIDADE DA PRODUÇÃO, PROJETOS DE PRODUTOS, CONTROLE DA QUALIDADE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAMINADA NETTO, Adherbal e KAMINSKI, Paulo Carlos. Assessing the quality of product design from the designer's point of view. 2005, Anais.. Rio de Janeiro: ABCM, 2005. Disponível em: https://repositorio.usp.br/directbitstream/05d241e3-13c5-40cb-a060-79674f8ff0cb/Kaminski-2005-Assessing%20the%20quality%20of%20product%20design%20from%20the%20designer%E2%80%99s%20point%20of%20view%20ok.pdf. Acesso em: 03 nov. 2024.
APA
Caminada Netto, A., & Kaminski, P. C. (2005). Assessing the quality of product design from the designer's point of view. In COBEM 2005 : proceedings. Rio de Janeiro: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/05d241e3-13c5-40cb-a060-79674f8ff0cb/Kaminski-2005-Assessing%20the%20quality%20of%20product%20design%20from%20the%20designer%E2%80%99s%20point%20of%20view%20ok.pdf
NLM
Caminada Netto A, Kaminski PC. Assessing the quality of product design from the designer's point of view [Internet]. COBEM 2005 : proceedings. 2005 ;[citado 2024 nov. 03 ] Available from: https://repositorio.usp.br/directbitstream/05d241e3-13c5-40cb-a060-79674f8ff0cb/Kaminski-2005-Assessing%20the%20quality%20of%20product%20design%20from%20the%20designer%E2%80%99s%20point%20of%20view%20ok.pdf
Vancouver
Caminada Netto A, Kaminski PC. Assessing the quality of product design from the designer's point of view [Internet]. COBEM 2005 : proceedings. 2005 ;[citado 2024 nov. 03 ] Available from: https://repositorio.usp.br/directbitstream/05d241e3-13c5-40cb-a060-79674f8ff0cb/Kaminski-2005-Assessing%20the%20quality%20of%20product%20design%20from%20the%20designer%E2%80%99s%20point%20of%20view%20ok.pdf
Artigo de periodico
The concept of product design (2004)
Caminada Netto, Adherbal; Kaminski, Paulo Carlos
Source: Product : management & development. Unidade: EP
Subjects: DESENVOLVIMENTO DE PRODUTOS, QUALIDADE DA PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAMINADA NETTO, Adherbal e KAMINSKI, Paulo Carlos. The concept of product design. Product : management & development, v. 2, n. 2, p. 73-76, 2004Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/89fb51e4-67b7-4751-89c4-b9cd65bf482f/Kaminski-2004-The%20Concept%20of%20Product%20Design%20ok.pdf. Acesso em: 03 nov. 2024.
APA
Caminada Netto, A., & Kaminski, P. C. (2004). The concept of product design. Product : management & development, 2( 2), 73-76. Recuperado de https://repositorio.usp.br/directbitstream/89fb51e4-67b7-4751-89c4-b9cd65bf482f/Kaminski-2004-The%20Concept%20of%20Product%20Design%20ok.pdf
NLM
Caminada Netto A, Kaminski PC. The concept of product design [Internet]. Product : management & development. 2004 ; 2( 2): 73-76.[citado 2024 nov. 03 ] Available from: https://repositorio.usp.br/directbitstream/89fb51e4-67b7-4751-89c4-b9cd65bf482f/Kaminski-2004-The%20Concept%20of%20Product%20Design%20ok.pdf
Vancouver
Caminada Netto A, Kaminski PC. The concept of product design [Internet]. Product : management & development. 2004 ; 2( 2): 73-76.[citado 2024 nov. 03 ] Available from: https://repositorio.usp.br/directbitstream/89fb51e4-67b7-4751-89c4-b9cd65bf482f/Kaminski-2004-The%20Concept%20of%20Product%20Design%20ok.pdf

USP Schools

ReP

Filtros

Departament

Authors

USP affiliated authors

Date published

Subjects

Source title

Non normalized affiliation