ReP USP - Resultado da busca

Artigo de periodico
Fatigue crack propagation of API 5L X70 steel in a modifed simulated fuel-grade ethanol (MSFGE) environment (2023)
Marcomini, José Benedito; Santos, Elielson Alves dos; Sordi, Vitor Luiz; Giorgetti, Vinicius; Rovere, Carlos Alberto Della; Baptista, Carlos Antonio Reis Pereira; Paes, Marcelo
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidades: EESC, EEL
Subjects: ETANOL, COMBUSTÍVEIS, FADIGA DOS MATERIAIS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARCOMINI, José Benedito et al. Fatigue crack propagation of API 5L X70 steel in a modifed simulated fuel-grade ethanol (MSFGE) environment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 45, p. 1-12, 2023Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-023-04540-z. Acesso em: 12 set. 2024.
APA
Marcomini, J. B., Santos, E. A. dos, Sordi, V. L., Giorgetti, V., Rovere, C. A. D., Baptista, C. A. R. P., & Paes, M. (2023). Fatigue crack propagation of API 5L X70 steel in a modifed simulated fuel-grade ethanol (MSFGE) environment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 1-12. doi:10.1007/s40430-023-04540-z
NLM
Marcomini JB, Santos EA dos, Sordi VL, Giorgetti V, Rovere CAD, Baptista CARP, Paes M. Fatigue crack propagation of API 5L X70 steel in a modifed simulated fuel-grade ethanol (MSFGE) environment [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-12.[citado 2024 set. 12 ] Available from: https://dx.doi.org/10.1007/s40430-023-04540-z
Vancouver
Marcomini JB, Santos EA dos, Sordi VL, Giorgetti V, Rovere CAD, Baptista CARP, Paes M. Fatigue crack propagation of API 5L X70 steel in a modifed simulated fuel-grade ethanol (MSFGE) environment [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-12.[citado 2024 set. 12 ] Available from: https://dx.doi.org/10.1007/s40430-023-04540-z
Artigo de periodico
Control of airfow induced vibrations on a cantilever beam by actuating on the exposure of its machined surface notch pattern (2023)
Paladini, Andre Luis Aguiar; Rodrigues, Andre L. G.; Bidinotto, Jorge Henrique ; Franco, Vitor Ramos
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: VIBRAÇÕES, AEROELASTICIDADE DE AERONAVES, GEOMETRIA, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PALADINI, Andre Luis Aguiar et al. Control of airfow induced vibrations on a cantilever beam by actuating on the exposure of its machined surface notch pattern. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 45, p. 1-16, 2023Tradução . . Disponível em: https://doi.org/10.1007/s40430-023-04255-1. Acesso em: 12 set. 2024.
APA
Paladini, A. L. A., Rodrigues, A. L. G., Bidinotto, J. H., & Franco, V. R. (2023). Control of airfow induced vibrations on a cantilever beam by actuating on the exposure of its machined surface notch pattern. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 1-16. doi:10.1007/s40430-023-04255-1
NLM
Paladini ALA, Rodrigues ALG, Bidinotto JH, Franco VR. Control of airfow induced vibrations on a cantilever beam by actuating on the exposure of its machined surface notch pattern [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-16.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-023-04255-1
Vancouver
Paladini ALA, Rodrigues ALG, Bidinotto JH, Franco VR. Control of airfow induced vibrations on a cantilever beam by actuating on the exposure of its machined surface notch pattern [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-16.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-023-04255-1
Artigo de periodico
Evaluation of diferent protection systems to control the geomembrane deformations in liner applications (2023)
Pedroso, Gabriel Orquizas Mattielo ; Silva, Jefferson Lins da
Source: International Journal of Geosynthetics and Ground Engineering. Unidade: EESC
Subjects: GEOMEMBRANAS, REJEITOS DE MINERAÇÃO, DEFORMAÇÃO ESTRUTURAL, GEOTECNIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEDROSO, Gabriel Orquizas Mattielo e SILVA, Jefferson Lins da. Evaluation of diferent protection systems to control the geomembrane deformations in liner applications. International Journal of Geosynthetics and Ground Engineering, v. 9, p. 1-11, 2023Tradução . . Disponível em: https://doi.org/10.1007/s40891-023-00455-w. Acesso em: 12 set. 2024.
APA
Pedroso, G. O. M., & Silva, J. L. da. (2023). Evaluation of diferent protection systems to control the geomembrane deformations in liner applications. International Journal of Geosynthetics and Ground Engineering, 9, 1-11. doi:10.1007/s40891-023-00455-w
NLM
Pedroso GOM, Silva JL da. Evaluation of diferent protection systems to control the geomembrane deformations in liner applications [Internet]. International Journal of Geosynthetics and Ground Engineering. 2023 ; 9 1-11.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40891-023-00455-w
Vancouver
Pedroso GOM, Silva JL da. Evaluation of diferent protection systems to control the geomembrane deformations in liner applications [Internet]. International Journal of Geosynthetics and Ground Engineering. 2023 ; 9 1-11.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40891-023-00455-w
Artigo de periodico
Study of surface warm shot peening on the fatigue life of a SAE 5160 leaf spring steel (2023)
Ruy, Marcos César; Bose Filho, Waldek Wladimir ; Doel, T. J. A.; Ruchert, Cassius Olívio Figueiredo Terra
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidades: EESC, EEL
Subjects: TRATAMENTO DE SUPERFÍCIES, FADIGA DOS MATERIAIS, TENSÃO RESIDUAL, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RUY, Marcos César et al. Study of surface warm shot peening on the fatigue life of a SAE 5160 leaf spring steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 45, p. 1-11, 2023Tradução . . Disponível em: https://doi.org/10.1007/s40430-023-04404-6. Acesso em: 12 set. 2024.
APA
Ruy, M. C., Bose Filho, W. W., Doel, T. J. A., & Ruchert, C. O. F. T. (2023). Study of surface warm shot peening on the fatigue life of a SAE 5160 leaf spring steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 1-11. doi:10.1007/s40430-023-04404-6
NLM
Ruy MC, Bose Filho WW, Doel TJA, Ruchert COFT. Study of surface warm shot peening on the fatigue life of a SAE 5160 leaf spring steel [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-11.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-023-04404-6
Vancouver
Ruy MC, Bose Filho WW, Doel TJA, Ruchert COFT. Study of surface warm shot peening on the fatigue life of a SAE 5160 leaf spring steel [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-11.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-023-04404-6
Artigo de periodico
Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling (2023)
Amaral, Ana Carolina Godoy; De Marqui Júnior, Carlos ; Silveira, Marcos
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: MOBILIDADE URBANA, PANDEMIAS, COVID-19, SISTEMAS DINÂMICOS, AEROELASTICIDADE DE AERONAVES, PIEZOELETRICIDADE, ENERGIA, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AMARAL, Ana Carolina Godoy e DE MARQUI JÚNIOR, Carlos e SILVEIRA, Marcos. Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 45, p. 1-14, 2023Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03783-6. Acesso em: 12 set. 2024.
APA
Amaral, A. C. G., De Marqui Júnior, C., & Silveira, M. (2023). Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 1-14. doi:10.1007/s40430-022-03783-6
NLM
Amaral ACG, De Marqui Júnior C, Silveira M. Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-14.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-022-03783-6
Vancouver
Amaral ACG, De Marqui Júnior C, Silveira M. Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-14.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-022-03783-6
Artigo de periodico
Sugarcane bagasse pretreated by different technologies used as support and carbon source in solid-state fermentation by Aureobasidium pullulans LB83 to produce bioemulsifier (2023)
Costa, Rogger Alessandro Mata da ; Silva, Silvio Silverio da ; Ribeaux, Daylin Rubio; Carneiro, Bruna Curry; Marcelino, Paulo Ricardo Franco ; Mendes, Geissy de Azevedo; Silva, Isis Lee da; Anjos, Virgílio de Carvalho dos; Santos, Julio Cesar dos ; Tiso, Till
Source: Biomass conversion and biorefinery. Unidade: EEL
Assunto: BIOTECNOLOGIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COSTA, Rogger Alessandro Mata da et al. Sugarcane bagasse pretreated by different technologies used as support and carbon source in solid-state fermentation by Aureobasidium pullulans LB83 to produce bioemulsifier. Biomass conversion and biorefinery, p. 1-17, 2023Tradução . . Disponível em: https://doi.org/10.1007/s13399-023-03896-5. Acesso em: 12 set. 2024.
APA
Costa, R. A. M. da, Silva, S. S. da, Ribeaux, D. R., Carneiro, B. C., Marcelino, P. R. F., Mendes, G. de A., et al. (2023). Sugarcane bagasse pretreated by different technologies used as support and carbon source in solid-state fermentation by Aureobasidium pullulans LB83 to produce bioemulsifier. Biomass conversion and biorefinery, 1-17. doi:10.1007/s13399-023-03896-5
NLM
Costa RAM da, Silva SS da, Ribeaux DR, Carneiro BC, Marcelino PRF, Mendes G de A, Silva IL da, Anjos V de C dos, Santos JC dos, Tiso T. Sugarcane bagasse pretreated by different technologies used as support and carbon source in solid-state fermentation by Aureobasidium pullulans LB83 to produce bioemulsifier [Internet]. Biomass conversion and biorefinery. 2023 ;1-17.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s13399-023-03896-5
Vancouver
Costa RAM da, Silva SS da, Ribeaux DR, Carneiro BC, Marcelino PRF, Mendes G de A, Silva IL da, Anjos V de C dos, Santos JC dos, Tiso T. Sugarcane bagasse pretreated by different technologies used as support and carbon source in solid-state fermentation by Aureobasidium pullulans LB83 to produce bioemulsifier [Internet]. Biomass conversion and biorefinery. 2023 ;1-17.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s13399-023-03896-5
Artigo de periodico
Closed‑loop optimization of piezoelectric sensors locations and gains for output feedback active vibration control (2023)
Shigueoka, Augusto H.; Trindade, Marcelo Areias
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Assunto: ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SHIGUEOKA, Augusto H. e TRINDADE, Marcelo Areias. Closed‑loop optimization of piezoelectric sensors locations and gains for output feedback active vibration control. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 45, p. 1-18, 2023Tradução . . Disponível em: https://doi.org/10.1007/s40430-023-04071-7. Acesso em: 12 set. 2024.
APA
Shigueoka, A. H., & Trindade, M. A. (2023). Closed‑loop optimization of piezoelectric sensors locations and gains for output feedback active vibration control. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 1-18. doi:10.1007/s40430-023-04071-7
NLM
Shigueoka AH, Trindade MA. Closed‑loop optimization of piezoelectric sensors locations and gains for output feedback active vibration control [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-18.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-023-04071-7
Vancouver
Shigueoka AH, Trindade MA. Closed‑loop optimization of piezoelectric sensors locations and gains for output feedback active vibration control [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-18.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-023-04071-7
Artigo de periodico
Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment (2022)
Leal, José Eduardo Silveira; Martiniano, Guilherme Antonelli; Bose Filho, Waldek Wladimir ; Craidy, Pedro da Silva; Paes, Marcelo Torres Piza; Ferreira, Daniel Correia Freire; Valdés Arencibia, Rosenda; Franco, Sinésio Domingues
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: HIDROGÊNIO, NANOCOMPOSITOS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LEAL, José Eduardo Silveira et al. Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, p. 1-13, 2022Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03783-6. Acesso em: 12 set. 2024.
APA
Leal, J. E. S., Martiniano, G. A., Bose Filho, W. W., Craidy, P. da S., Paes, M. T. P., Ferreira, D. C. F., et al. (2022). Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, 1-13. doi:10.1007/s40430-022-03783-6
NLM
Leal JES, Martiniano GA, Bose Filho WW, Craidy P da S, Paes MTP, Ferreira DCF, Valdés Arencibia R, Franco SD. Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-13.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-022-03783-6
Vancouver
Leal JES, Martiniano GA, Bose Filho WW, Craidy P da S, Paes MTP, Ferreira DCF, Valdés Arencibia R, Franco SD. Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-13.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-022-03783-6
Artigo de periodico
Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system (2022)
Santos, Fernando Neves Quintino dos; Colmanetti, Alex Roger Almeida; Cabezas Gómez, Luben ; Tibiriçá, Cristiano Bigonha
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: REFRIGERAÇÃO, AQUECIMENTO, GERAÇÃO DE ENERGIA ELÉTRICA, TERMOELETRICIDADE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Fernando Neves Quintino dos et al. Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, p. 1-11, 2022Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03791-6. Acesso em: 12 set. 2024.
APA
Santos, F. N. Q. dos, Colmanetti, A. R. A., Cabezas Gómez, L., & Tibiriçá, C. B. (2022). Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, 1-11. doi:10.1007/s40430-022-03791-6
NLM
Santos FNQ dos, Colmanetti ARA, Cabezas Gómez L, Tibiriçá CB. Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-11.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-022-03791-6
Vancouver
Santos FNQ dos, Colmanetti ARA, Cabezas Gómez L, Tibiriçá CB. Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-11.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-022-03791-6
Artigo de periodico
Neural networks to classify atmospheric turbulence from fight test data: an optimization of input parameters for a generic model (2022)
Oliveira, Matheus Marcondes; Sotto Mayor, Gabriel; Macedo, João Paulo Costa Antunes de; Bidinotto, Jorge Henrique
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: REDES NEURAIS, TURBULÊNCIA ATMOSFÉRICA, VOO (ENGENHARIA AERONÁUTICA), ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Matheus Marcondes et al. Neural networks to classify atmospheric turbulence from fight test data: an optimization of input parameters for a generic model. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, p. 1-11, 2022Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03386-1. Acesso em: 12 set. 2024.
APA
Oliveira, M. M., Sotto Mayor, G., Macedo, J. P. C. A. de, & Bidinotto, J. H. (2022). Neural networks to classify atmospheric turbulence from fight test data: an optimization of input parameters for a generic model. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, 1-11. doi:10.1007/s40430-022-03386-1
NLM
Oliveira MM, Sotto Mayor G, Macedo JPCA de, Bidinotto JH. Neural networks to classify atmospheric turbulence from fight test data: an optimization of input parameters for a generic model [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-11.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-022-03386-1
Vancouver
Oliveira MM, Sotto Mayor G, Macedo JPCA de, Bidinotto JH. Neural networks to classify atmospheric turbulence from fight test data: an optimization of input parameters for a generic model [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-11.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-022-03386-1
Artigo de periodico
Toward the use of bond graphs for manufacturing control: improving existing models (2022)
Maluf, Arthur Sarro; Sagawa, Juliana Keiko; Tavares Neto, Roberto Fernandes; Silva, Maíra Martins da
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: CONTROLE DA PRODUÇÃO, INDÚSTRIA 4.0, SISTEMAS DINÂMICOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MALUF, Arthur Sarro et al. Toward the use of bond graphs for manufacturing control: improving existing models. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, p. 1-17, 2022Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03827-x. Acesso em: 12 set. 2024.
APA
Maluf, A. S., Sagawa, J. K., Tavares Neto, R. F., & Silva, M. M. da. (2022). Toward the use of bond graphs for manufacturing control: improving existing models. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, 1-17. doi:10.1007/s40430-022-03827-x
NLM
Maluf AS, Sagawa JK, Tavares Neto RF, Silva MM da. Toward the use of bond graphs for manufacturing control: improving existing models [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-17.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-022-03827-x
Vancouver
Maluf AS, Sagawa JK, Tavares Neto RF, Silva MM da. Toward the use of bond graphs for manufacturing control: improving existing models [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-17.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-022-03827-x
Artigo de periodico
Certifcation of linear closed-loop controllers using the v-gap metric and the generalized stability margin (2021)
Okle, Jan; Noppeney, Victor Tamassia; Cunha, Thiago Boaventura
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: CONTROLADORES PROGRAMÁVEIS, SISTEMAS DINÂMICOS, ROBÔS, SISTEMAS DE CONTROLE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OKLE, Jan e NOPPENEY, Victor Tamassia e CUNHA, Thiago Boaventura. Certifcation of linear closed-loop controllers using the v-gap metric and the generalized stability margin. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-10, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03079-1. Acesso em: 12 set. 2024.
APA
Okle, J., Noppeney, V. T., & Cunha, T. B. (2021). Certifcation of linear closed-loop controllers using the v-gap metric and the generalized stability margin. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-10. doi:10.1007/s40430-021-03079-1
NLM
Okle J, Noppeney VT, Cunha TB. Certifcation of linear closed-loop controllers using the v-gap metric and the generalized stability margin [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-10.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-021-03079-1
Vancouver
Okle J, Noppeney VT, Cunha TB. Certifcation of linear closed-loop controllers using the v-gap metric and the generalized stability margin [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-10.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-021-03079-1
Artigo de periodico
Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions (2021)
Barbosa, Ismael Motta; Alves, Paulo Rodrigues; Silveira, Zilda de Castro
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: TECNOLOGIAS DA SAÚDE, ACIDENTE VASCULAR CEREBRAL, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BARBOSA, Ismael Motta e ALVES, Paulo Rodrigues e SILVEIRA, Zilda de Castro. Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-16, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-02919-4. Acesso em: 12 set. 2024.
APA
Barbosa, I. M., Alves, P. R., & Silveira, Z. de C. (2021). Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-16. doi:10.1007/s40430-021-02919-4
NLM
Barbosa IM, Alves PR, Silveira Z de C. Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-16.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-021-02919-4
Vancouver
Barbosa IM, Alves PR, Silveira Z de C. Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-16.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-021-02919-4
Artigo de periodico
Self‑difusion in nanofuids of nonelongated particles in the dilute limit (2021)
Fariñas Alvariño, Pablo; Saiz Jabardo, José Maria; Cabezas Gómez, Luben
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: NANOPARTÍCULAS, ESCOAMENTO BIFÁSICO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FARIÑAS ALVARIÑO, Pablo e SAIZ JABARDO, José Maria e CABEZAS GÓMEZ, Luben. Self‑difusion in nanofuids of nonelongated particles in the dilute limit. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-18, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03101-6. Acesso em: 12 set. 2024.
APA
Fariñas Alvariño, P., Saiz Jabardo, J. M., & Cabezas Gómez, L. (2021). Self‑difusion in nanofuids of nonelongated particles in the dilute limit. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-18. doi:10.1007/s40430-021-03101-6
NLM
Fariñas Alvariño P, Saiz Jabardo JM, Cabezas Gómez L. Self‑difusion in nanofuids of nonelongated particles in the dilute limit [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-18.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-021-03101-6
Vancouver
Fariñas Alvariño P, Saiz Jabardo JM, Cabezas Gómez L. Self‑difusion in nanofuids of nonelongated particles in the dilute limit [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-18.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-021-03101-6
Artigo de periodico
Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches (2021)
Santos, Artur Valadares de Freitas; Silveira, Zilda de Castro
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: MANUFATURA, TECNOLOGIAS DA SAÚDE, TERCEIRA DIMENSÃO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Artur Valadares de Freitas e SILVEIRA, Zilda de Castro. Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-15, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03184-1. Acesso em: 12 set. 2024.
APA
Santos, A. V. de F., & Silveira, Z. de C. (2021). Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-15. doi:10.1007/s40430-021-03184-1
NLM
Santos AV de F, Silveira Z de C. Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-15.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-021-03184-1
Vancouver
Santos AV de F, Silveira Z de C. Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-15.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-021-03184-1
Artigo de periodico
Accurate and fully analytical expressions for quantum energy levels in fnite potential wells for nanoelectronic compact modeling (2021)
Celino, Daniel Ricardo; Romero, Murilo Araujo ; Ragi, Regiane
Source: Journal of Computational Electronics. Unidade: EESC
Subjects: NANOELETRÔNICA, POÇOS QUÂNTICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CELINO, Daniel Ricardo e ROMERO, Murilo Araujo e RAGI, Regiane. Accurate and fully analytical expressions for quantum energy levels in fnite potential wells for nanoelectronic compact modeling. Journal of Computational Electronics, p. 1-9, 2021Tradução . . Disponível em: https://doi.org/10.1007/s10825-021-01786-5. Acesso em: 12 set. 2024.
APA
Celino, D. R., Romero, M. A., & Ragi, R. (2021). Accurate and fully analytical expressions for quantum energy levels in fnite potential wells for nanoelectronic compact modeling. Journal of Computational Electronics, 1-9. doi:10.1007/s10825-021-01786-5
NLM
Celino DR, Romero MA, Ragi R. Accurate and fully analytical expressions for quantum energy levels in fnite potential wells for nanoelectronic compact modeling [Internet]. Journal of Computational Electronics. 2021 ; 1-9.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s10825-021-01786-5
Vancouver
Celino DR, Romero MA, Ragi R. Accurate and fully analytical expressions for quantum energy levels in fnite potential wells for nanoelectronic compact modeling [Internet]. Journal of Computational Electronics. 2021 ; 1-9.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s10825-021-01786-5
Artigo de periodico
Improved localization in a corn crop row using a rotated laser rangefnder for three-dimensional data acquisition (2020)
Gasparino, Mateus Valverde; Higuti, Vitor Akihiro Hisano; Baquero Velasquez, Andres Eduardo; Becker, Marcelo
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: ROBÔS, AGRICULTURA DE PRECISÃO, PERCEPÇÃO, SENSOR, 3-D VER TERCEIRA DIMENSÃO., ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GASPARINO, Mateus Valverde et al. Improved localization in a corn crop row using a rotated laser rangefnder for three-dimensional data acquisition. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 42, p. 1-10, 2020Tradução . . Disponível em: https://doi.org/10.1007/s40430-020-02673-z. Acesso em: 12 set. 2024.
APA
Gasparino, M. V., Higuti, V. A. H., Baquero Velasquez, A. E., & Becker, M. (2020). Improved localization in a corn crop row using a rotated laser rangefnder for three-dimensional data acquisition. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-10. doi:10.1007/s40430-020-02673-z
NLM
Gasparino MV, Higuti VAH, Baquero Velasquez AE, Becker M. Improved localization in a corn crop row using a rotated laser rangefnder for three-dimensional data acquisition [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-10.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-020-02673-z
Vancouver
Gasparino MV, Higuti VAH, Baquero Velasquez AE, Becker M. Improved localization in a corn crop row using a rotated laser rangefnder for three-dimensional data acquisition [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-10.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-020-02673-z
Artigo de periodico
Preliminary studies on additive manufacturing of over 95% dense 3Y zirconia parts via digital imaging projection (2020)
Amaral, Leticia Bueno do; Paschoa, Jorge Luis Faneco; Magalhães, Daniel Varela ; Foschini, Cesar Renato ; Suchicital, Carlos T. A.; Fortulan, Carlos Alberto
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: IMAGEM 3D, IMPRESSÃO, CERÂMICA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AMARAL, Leticia Bueno do et al. Preliminary studies on additive manufacturing of over 95% dense 3Y zirconia parts via digital imaging projection. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 42, p. 1-8, 2020Tradução . . Disponível em: https://doi.org/10.1007/s40430-019-2157-1. Acesso em: 12 set. 2024.
APA
Amaral, L. B. do, Paschoa, J. L. F., Magalhães, D. V., Foschini, C. R., Suchicital, C. T. A., & Fortulan, C. A. (2020). Preliminary studies on additive manufacturing of over 95% dense 3Y zirconia parts via digital imaging projection. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-8. doi:10.1007/s40430-019-2157-1
NLM
Amaral LB do, Paschoa JLF, Magalhães DV, Foschini CR, Suchicital CTA, Fortulan CA. Preliminary studies on additive manufacturing of over 95% dense 3Y zirconia parts via digital imaging projection [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-8.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-019-2157-1
Vancouver
Amaral LB do, Paschoa JLF, Magalhães DV, Foschini CR, Suchicital CTA, Fortulan CA. Preliminary studies on additive manufacturing of over 95% dense 3Y zirconia parts via digital imaging projection [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-8.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-019-2157-1
Artigo de periodico
Finite element modeling and analysis of an atomic force microscope cantilever beam coupled to a piezoceramic base actuator (2018)
Rodrigues, Kleber dos Santos; Trindade, Marcelo Areias
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: MICROSCOPIA DE FORÇA ATÔMICA, MÉTODO DOS ELEMENTOS FINITOS, ATUADORES PIEZELÉTRICOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RODRIGUES, Kleber dos Santos e TRINDADE, Marcelo Areias. Finite element modeling and analysis of an atomic force microscope cantilever beam coupled to a piezoceramic base actuator. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 40, p. 1-13, 2018Tradução . . Disponível em: https://doi.org/10.1007/s40430-018-1347-6. Acesso em: 12 set. 2024.
APA
Rodrigues, K. dos S., & Trindade, M. A. (2018). Finite element modeling and analysis of an atomic force microscope cantilever beam coupled to a piezoceramic base actuator. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40, 1-13. doi:10.1007/s40430-018-1347-6
NLM
Rodrigues K dos S, Trindade MA. Finite element modeling and analysis of an atomic force microscope cantilever beam coupled to a piezoceramic base actuator [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018 ; 40 1-13.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-018-1347-6
Vancouver
Rodrigues K dos S, Trindade MA. Finite element modeling and analysis of an atomic force microscope cantilever beam coupled to a piezoceramic base actuator [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018 ; 40 1-13.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-018-1347-6
Artigo de periodico
Experimental tests of a new assisted tool holder for ultraprecision machining (2018)
Brino, Henrique Roberto de Herdani; Duduch, Jaime Gilberto
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: USINAGEM, PIEZOELETRICIDADE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BRINO, Henrique Roberto de Herdani e DUDUCH, Jaime Gilberto. Experimental tests of a new assisted tool holder for ultraprecision machining. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 40, p. 1-7, 2018Tradução . . Disponível em: https://doi.org/10.1007/s40430-018-1159-8. Acesso em: 12 set. 2024.
APA
Brino, H. R. de H., & Duduch, J. G. (2018). Experimental tests of a new assisted tool holder for ultraprecision machining. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40, 1-7. doi:10.1007/s40430-018-1159-8
NLM
Brino HR de H, Duduch JG. Experimental tests of a new assisted tool holder for ultraprecision machining [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018 ; 40 1-7.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-018-1159-8
Vancouver
Brino HR de H, Duduch JG. Experimental tests of a new assisted tool holder for ultraprecision machining [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018 ; 40 1-7.[citado 2024 set. 12 ] Available from: https://doi.org/10.1007/s40430-018-1159-8

USP Schools

ReP

Filtros

Departament

Authors

USP affiliated authors

Date published

Subjects

Funding Agencies

Non normalized affiliation

Countries of institutions of collaboration