Creep Properties of Directionally Solidified Nb-Modified Ni-Base Superalloy, Mar-M247 (2018)
- Authors:
- Autor USP: NUNES, CARLOS ANGELO - EEL
- Unidade: EEL
- DOI: 10.1007/s11665-018-3699-6
- Subjects: ESTABILIDADE; NIÓBIO; LIGAS REFRATÁRIAS
- Keywords: creep; Mar-M247; Ni-base superalloy; niobium; stability
- Language: Inglês
- Abstract: The Ni-base superalloy Mar-M247 is widely used for elevated-temperature applications in both equiaxed and directionally solidified forms. The alloy contains about 3 wt.% Ta. Due to the cost and density of Ta, an atom-for-atom substitution of Nb for Ta was investigated. The creep properties in the temperature range of 750-950 °C and stresses ranging from 200 to 1000 MPa were determined. In general, the creep properties of the Nb-modified Mar-M247 material were very similar to those of Mar-M247 samples at 750 and 850 °C. However, the Mar-M247 samples exhibited superior creep properties at 950 °C. The lower creep properties of the Nb-modified Mar-M247 are likely due to the finer starting microstructure, more rapid coarsening rate of the γ′ and reduced γ′ strengthening effect (i.e., APB energy) of Nb, compared to Ta. No evidence of TCP phases was observed in either alloy.
- Imprenta:
- Source:
- Título: Journal of materials engineering and performance
- ISSN: 1059-9495
- Volume/Número/Paginação/Ano: v. 27, p. 5744–5751, 2018
- Este periódico é de assinatura
- Este artigo NÃO é de acesso aberto
- Cor do Acesso Aberto: closed
-
ABNT
COSTA, Alex Matos da Silva et al. Creep Properties of Directionally Solidified Nb-Modified Ni-Base Superalloy, Mar-M247. Journal of materials engineering and performance, v. 27, p. 5744–5751, 2018Tradução . . Disponível em: https://doi.org/10.1007/s11665-018-3699-6. Acesso em: 29 dez. 2025. -
APA
Costa, A. M. da S., Hawk, E., Dansbury, J., Nunes, C. A., & Fuchs, G. E. (2018). Creep Properties of Directionally Solidified Nb-Modified Ni-Base Superalloy, Mar-M247. Journal of materials engineering and performance, 27, 5744–5751. doi:10.1007/s11665-018-3699-6 -
NLM
Costa AM da S, Hawk E, Dansbury J, Nunes CA, Fuchs GE. Creep Properties of Directionally Solidified Nb-Modified Ni-Base Superalloy, Mar-M247 [Internet]. Journal of materials engineering and performance. 2018 ; 27 5744–5751.[citado 2025 dez. 29 ] Available from: https://doi.org/10.1007/s11665-018-3699-6 -
Vancouver
Costa AM da S, Hawk E, Dansbury J, Nunes CA, Fuchs GE. Creep Properties of Directionally Solidified Nb-Modified Ni-Base Superalloy, Mar-M247 [Internet]. Journal of materials engineering and performance. 2018 ; 27 5744–5751.[citado 2025 dez. 29 ] Available from: https://doi.org/10.1007/s11665-018-3699-6 - Effect of hot swaging on microstructure and properties of aged Ti-10Mo-20Nb alloy
- Effect of zirconium addition on the phase transformations in as-cast and heat-treated Ti–Zr–Si–B alloys
- Microstructural and Mechanical Characterization of Directionally Solidified Conventional and Nb-Modified Mar-M247 Superalloy
- Microstructure and corrosion behavior in SBF medium of spark plasma sintered Ti-xZr-20Si-10B (x = 5, 7, 10, 15, 20-at.-%) alloys
- Spark Plasma Sintering of Ti6Si2B-based Ti-Si-B Alloys and Their Corrosion Resistance in Artificial Saliva and SBF Media
- Mechanical and Microstructural Characterization of AS-CAST Ti-12Mo-xNb Alloys for Orthopedic Application
- Corrosion resistance of aged Ti–Mo–Nb alloys for biomedical applications
- Actual and predicted glass forming ability of alloys in the 'Ti'-'Si'-'B' system
- Experimental study of the liquid–solid phase equilibria of the V–Cr–Si system
- The 1300 °C Isothermal Section in the Al2O3-Y2O3-Nb2O5 System
Informações sobre o DOI: 10.1007/s11665-018-3699-6 (Fonte: oaDOI API)
How to cite
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
