Spark Plasma Sintering of Ti6Si2B-based Ti-Si-B Alloys and Their Corrosion Resistance in Artificial Saliva and SBF Media (2019)
- Authors:
- Autor USP: NUNES, CARLOS ANGELO - EEL
- Unidade: EEL
- DOI: 10.1016/j.mtcomm.2019.100767
- Subjects: CORROSÃO; SINTERIZAÇÃO
- Agências de fomento:
- Language: Inglês
- Abstract: Titanium alloys are widely used for dental, medical, automotive, aeronautic and aerospace applications due to their chemical, physical, biological and mechanical properties. Orthopedic implants of the as-cast and heat-treated Ti–10Si–5B alloy present good bone integration capacity as well as Tiss+Ti6Si2B alloys exhibit higher oxidation resistance than Tiss+Ti5Si3 alloys. In this sense, Ti-8Si-4B, Ti-10Si-5B, Ti-14Si-7B, Ti-20Si-10B, and Ti-22Si-11B alloys (atomic percentage - at.-%) with Ti6Si2B-based microstructures were produced by high-energy ball milling and further spark plasma sintering (SPS) at 1100 °C for 6 min under an uniaxial pressure of 191 MPa. Thus, the corrosion resistance of these SPSed Ti-Si-B alloys was evaluated using potentiodynamic polarization method in different media: artificial saliva (AFNOR NF S90-701) and simulated body fluid (SBF). The SPSed Ti-Si-B alloys were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy dispersive spectrometry (EDS). Porosity tests based on Arquimedes’ principle were also performed to evaluate their porosity and density. Despite the short sintering time, our results have confirmed that fine and dense SPSed Ti-Si-B samples with microstructures based on solid solution Ti (Tiss) and Ti6Si2B phases were produced from mechanically alloyed Ti-Si-B powders. The Ti-22Si-11B alloy containing higher amounts of Ti6Si2B presented lower values of passivation current density (2.69 and 0.08 μA.cm-2) and higher corrosion potential (−0.232 and −0.258 V) when compared to Ti-8Si-4B alloy (2.58 and 0.25 μA.cm-2; −0.396 and −0.339 V) in artificial saliva and SBF media, respectively. Moreover, it demonstrates superior corrosion resistant than Ti-7Zr-20Si-10B, Ti-13Nb-13Zr, Ti-6Al-4V and pure Ti.
- Source:
- Título do periódico: Materials Today Communications
- ISSN: 23524928
- Volume/Número/Paginação/Ano: v.22, p.100767-, 2019
- Este periódico é de assinatura
- Este artigo NÃO é de acesso aberto
- Cor do Acesso Aberto: closed
-
ABNT
FIORIN, Bárbara de Oliveira et al. Spark Plasma Sintering of Ti6Si2B-based Ti-Si-B Alloys and Their Corrosion Resistance in Artificial Saliva and SBF Media. Materials Today Communications, v. 22, p. 100767-, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.mtcomm.2019.100767. Acesso em: 19 abr. 2024. -
APA
Fiorin, B. de O., Holland, T., Ferreira, L. M., Sousa, L. L. de, Mariano, N. A., Nunes, C. A., et al. (2019). Spark Plasma Sintering of Ti6Si2B-based Ti-Si-B Alloys and Their Corrosion Resistance in Artificial Saliva and SBF Media. Materials Today Communications, 22, 100767-. doi:10.1016/j.mtcomm.2019.100767 -
NLM
Fiorin B de O, Holland T, Ferreira LM, Sousa LL de, Mariano NA, Nunes CA, Filgueira M, Ramos AS. Spark Plasma Sintering of Ti6Si2B-based Ti-Si-B Alloys and Their Corrosion Resistance in Artificial Saliva and SBF Media [Internet]. Materials Today Communications. 2019 ;22 100767-.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.mtcomm.2019.100767 -
Vancouver
Fiorin B de O, Holland T, Ferreira LM, Sousa LL de, Mariano NA, Nunes CA, Filgueira M, Ramos AS. Spark Plasma Sintering of Ti6Si2B-based Ti-Si-B Alloys and Their Corrosion Resistance in Artificial Saliva and SBF Media [Internet]. Materials Today Communications. 2019 ;22 100767-.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.mtcomm.2019.100767 - Effect of hot swaging on microstructure and properties of aged Ti-10Mo-20Nb alloy
- Effect of zirconium addition on the phase transformations in as-cast and heat-treated Ti–Zr–Si–B alloys
- Microstructure and corrosion behavior in SBF medium of spark plasma sintered Ti-xZr-20Si-10B (x = 5, 7, 10, 15, 20-at.-%) alloys
- Microstructural and Mechanical Characterization of Directionally Solidified Conventional and Nb-Modified Mar-M247 Superalloy
- Corrosion resistance of aged Ti–Mo–Nb alloys for biomedical applications
- Mechanical and Microstructural Characterization of AS-CAST Ti-12Mo-xNb Alloys for Orthopedic Application
- Oxidation behavior of STA β-21S alloy and variants [Ti-xNb-yMo-5.6Al-0.5Si at%; x+y=9.5]
- Actual and predicted glass forming ability of alloys in the 'Ti'-'Si'-'B' system
- Experimental study of the liquid–solid phase equilibria of the V–Cr–Si system
- The 1300 °C Isothermal Section in the Al2O3-Y2O3-Nb2O5 System
Informações sobre o DOI: 10.1016/j.mtcomm.2019.100767 (Fonte: oaDOI API)
How to cite
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas