Protrusions formed during primary recrystallization of cross-rolled coarse-grained niobium (2019)
- Authors:
- USP affiliated authors: SANDIM, HUGO RICARDO ZSCHOMMLER - EEL ; ALMEIDA JUNIOR, DAVISON RAMOS DE - EEL
- Unidade: EEL
- DOI: 10.1016/j.ijrmhm.2019.105080
- Subjects: DEFORMAÇÃO ESTRUTURAL; RECRISTALIZAÇÃO
- Keywords: Protrusions Cross rolling; Deformation structure; Recrystallization Orientation effects
- Agências de fomento:
- Language: Inglês
- Abstract: The growth of recrystallization nuclei towards the deformed matrix generally does not proceed isotropically. Local disturbances in the migration along grain boundaries lead to the formation of protrusions. This important aspect in recrystallization is rarely explored in the literature, especially in the sense of understanding which microstructural mechanisms explain its formation. The aim of this work is to study the formation of protrusions during the recrystallization of a niobium oligocrystal. A coarse-grained niobium plate was cut out from the longitudinal section of an electron-beam cast ingot. Five coarse grains (A, B, C, D and E) were randomly selected for this study to evaluate likely orientation effects on protrusion formation. The plate was cold rolled with several passes up to 50% thickness reduction. The sheet was then cut into two parts. The former was straight rolled until 70% thickness reduction while the latter was rotated 90° around the normal direction with respect to the initial rolling direction. Important orientation and rolling mode effects were noticed regarding their recrystallization behavior. Protrusions were more abundant in the cross-rolled specimens. It was not possible to identify and associate significant differences regarding either CSL-type special boundaries or highly-misoriented boundaries ahead of the boundaries showing protrusions.
- Imprenta:
- Source:
- Título: International journal of refractory metals & hard materials
- ISSN: 0263-4368
- Volume/Número/Paginação/Ano: v.85, n. art. 105080, p.1-12, 2019
- Este periódico é de acesso aberto
- Este artigo NÃO é de acesso aberto
-
ABNT
BREKAILO, Tamires et al. Protrusions formed during primary recrystallization of cross-rolled coarse-grained niobium. International journal of refractory metals & hard materials, v. 85, n. art. 105080, p. 1-12, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.ijrmhm.2019.105080. Acesso em: 13 fev. 2026. -
APA
Brekailo, T., Almeida Junior, D. R., Avalos, M., Bolmaro, R. E., & Sandim, H. R. Z. (2019). Protrusions formed during primary recrystallization of cross-rolled coarse-grained niobium. International journal of refractory metals & hard materials, 85( art. 105080), 1-12. doi:10.1016/j.ijrmhm.2019.105080 -
NLM
Brekailo T, Almeida Junior DR, Avalos M, Bolmaro RE, Sandim HRZ. Protrusions formed during primary recrystallization of cross-rolled coarse-grained niobium [Internet]. International journal of refractory metals & hard materials. 2019 ;85( art. 105080): 1-12.[citado 2026 fev. 13 ] Available from: https://doi.org/10.1016/j.ijrmhm.2019.105080 -
Vancouver
Brekailo T, Almeida Junior DR, Avalos M, Bolmaro RE, Sandim HRZ. Protrusions formed during primary recrystallization of cross-rolled coarse-grained niobium [Internet]. International journal of refractory metals & hard materials. 2019 ;85( art. 105080): 1-12.[citado 2026 fev. 13 ] Available from: https://doi.org/10.1016/j.ijrmhm.2019.105080 - Reconstructing the austenite parent microstructure of martensitic steels: A case study for reduced-activation Eurofer steels
- Abnormal grain growth in thin wires of commercially pure iron with anisotropic microstructure
- The impact of grain-scale strain localization on strain hardening of a high-Mn steel: Real-time tracking of the transition from the γ → ε → α’ transformation to twinning
- Misorientation distribution between martensite and austenite in Fe-31 wt%Ni-0.01 wt%C
- Effect of Cold Rolling on the Transformation Kinetics of Sigma- and Chi- Phases in UNS S32205 Duplex Stainless Steel
- Micromechanical aspects of the austenite reversion in a high-Mn steel evaluated by in-situ synchrotron X-ray diffraction
- Long-term thermal stability of nanoclusters in ODS-Eurofer steel: An atom probe tomography study
- Thermodynamic simulation of reduced activation ferritic-martensitic Eurofer-97 steel
- Strain hardening engineering via grain size control in laser powder-bed fusion
- Microstructure Optimization of Mg-Alloys by the ECAP Process Including Numerical Simulation, SPD Treatments, Characterization, and Hydrogen Sorption Properties
Informações sobre o DOI: 10.1016/j.ijrmhm.2019.105080 (Fonte: oaDOI API)
How to cite
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
