Artigo de periodico

Strain-rate effects on the recrystallization of molybdenum-based MZ17 alloy (2023)

• Authors:
  • Souza Filho, Isnaldi Rodrigues de
  • Knabl, Wolfram
  • Kestler, Henrich
  • Sandim, Hugo Ricardo Zschommler
• Autor USP: SANDIM, HUGO RICARDO ZSCHOMMLER - EEL
• Unidade: EEL
• DOI: 10.1016/j.ijrmhm.2023.106124
• Subjects: MOLIBDÊNIO; MATERIAIS
• Keywords: MZ17; Compression tests; Molybdenum-based alloys; Dynamic recovery; Dynamic recrystallization; Particle stimulated nucleation
• Language: Inglês
• Abstract: Warm compression tests were performed for the Mo-based alloy MZ17 (Mo-1.7% wt.-ZrO2). Macroscopic deformations to about 67% reduction in height were imposed to cylindrical specimens over a wide range of strain rates (from 10− 1 to 10 s − 1 ) at 1000 and 1100 ◦C to investigate the effects of both, the strain rate and deformation temperature on the recrystallization of the alloy. The compression tests were performed under high vacuum (< 5.0 × 10− 4 mbar) using a deformation dilatometer followed by fast cooling. Stress-strain curves with very similar shapes can be noticed for all testing conditions. As-deformed microstructures were imaged at the center of the samples where plastic flow is more uniformly distributed using electron backscatter diffraction (EBSD) to distinguish the recovered domains from the recrystallized grains. Electron channeling contrast imaging (ECCI) was used to visualize the dislocation structures. At all tested temperatures and strain rates, only partial recrystallization was detected. The recrystallized volume fraction increases with increasing the strain rate. There is microstructural evidence of three restoration mechanisms acting during warm deformation; i.e., dynamic recovery, dynamic recrystallization and particle stimulated nucleation (PSN), the latter to a minor extent.
• Imprenta:
  • Publisher: Elsevier
  • Publisher place: Utah - USA
  • Date published: 2023
• Source:
  • Título: International journal of refractory metals & hard materials
  • ISSN: 0263-4368
  • Volume/Número/Paginação/Ano: v.112, p. 1-8, art. 106124, 2023

Informações sobre o DOI: 10.1016/j.ijrmhm.2023.106124 (Fonte: oaDOI API)
• Este periódico é de assinatura
• Este artigo NÃO é de acesso aberto
  
• Cor do Acesso Aberto: closed

---

How to cite

A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

• ABNT

  SOUZA FILHO, Isnaldi Rodrigues de et al. Strain-rate effects on the recrystallization of molybdenum-based MZ17 alloy. International journal of refractory metals & hard materials, v. 112, p. 1-8, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.ijrmhm.2023.106124. Acesso em: 28 dez. 2025.

• APA

  Souza Filho, I. R. de, Knabl, W., Kestler, H., & Sandim, H. R. Z. (2023). Strain-rate effects on the recrystallization of molybdenum-based MZ17 alloy. International journal of refractory metals & hard materials, 112, 1-8. doi:10.1016/j.ijrmhm.2023.106124

• NLM

  Souza Filho IR de, Knabl W, Kestler H, Sandim HRZ. Strain-rate effects on the recrystallization of molybdenum-based MZ17 alloy [Internet]. International journal of refractory metals & hard materials. 2023 ;112 1-8.[citado 2025 dez. 28 ] Available from: https://doi.org/10.1016/j.ijrmhm.2023.106124

• Vancouver

  Souza Filho IR de, Knabl W, Kestler H, Sandim HRZ. Strain-rate effects on the recrystallization of molybdenum-based MZ17 alloy [Internet]. International journal of refractory metals & hard materials. 2023 ;112 1-8.[citado 2025 dez. 28 ] Available from: https://doi.org/10.1016/j.ijrmhm.2023.106124

Últimas obras dos mesmos autores vinculados com a USP cadastradas na BDPI:

• Recrystallization kinetics, mechanisms, and topology in alloys processed by laser powder-bed fusion: AISI 316L stainless steel as example
• Preparação de ligas 'NB'-'TI''O IND.2' por metalurgia do pó e sua caracterização microestrutural
• The origin of abnormal grain growth upon thermomechanical processing of laser powder-bed fusion alloys
• Microstructural Stability of a Niobium Single Crystal Deformed by Equal Channel Angular Pressing
• Strain-Rate Effects on the Recrystallization of Molybdenum-Based MZ17 Alloy
• Electron beam welding of API 5L X65 steel
• Microstructure Optimization of Mg-Alloys by the ECAP Process Including Numerical Simulation, SPD Treatments, Characterization, and Hydrogen Sorption Properties
• Recrystallization in non-conventional microstructures of 316L stainless steel produced via laser powder-bed fusion: effect of particle coarsening kinetics
• Strain hardening engineering via grain size control in laser powder-bed fusion
• Long-term thermal stability of nanoclusters in ODS-Eurofer steel: An atom probe tomography study