Artigo de periodico

Development of dense Al2O3-TiO2 ceramic composites by the glass-infiltration of porous substrates prepared from mechanical alloyed powders (2020)

• Authors:
  • ALVES, MANUEL F.R.P.
  • SANTOS, Claudinei dos
  • COSSU, CAIO M.F.A.
  • Suzuki, Paulo Atsushi
  • Ramos, Alfeu Saraiva
  • RAMOS, Erika Coaglia Trindade
  • SIMBA, BRUNO GALVÃO
  • Strecker, Kurt
• USP affiliated authors: SUZUKI, PAULO ATSUSHI - EEL ; COSSÚ, CAIO MARCELLO FELBINGER AZEVEDO - EEL
• Unidade: EEL
• DOI: 10.1016/j.ceramint.2019.09.225
• Subjects: ALUMINA; MATERIAIS COMPÓSITOS
• Agências de fomento:
  • Financiamento CNPq
  • Financiamento FAPERJ
  • Financiamento FINEP
• Language: Inglês
• Abstract: In this work bio-composites were obtained by infiltrating porous alumina–titania (Al2O3–TiO2) substrates with a lanthania-rich (La2O3) glass. Al2O3–TiO2 substrates were fabricated using high-energy milled powder mixtures of two different compositions with molar ratios of 3:1 and 1:1, uniaxial compaction under 100 MPa and sintering at 1300 °C - 2 h or 1400 °C - 2 h. The high energy milling process of the powders resulted in homogeneous, ex- tremely fine mixtures. For comparison, as-received Al2O3 and TiO2 powders were also mixed at a proportion of 3:1 and sintered at 1600 °C - 2 h. The sintered substrates presented α-Al2O3 and β-Al2TiO5 (aluminium titanate) as crystal phases and relative densities ranging between 65.5 ± 2% and 69.4 ± 1.2% of the theoretical density. These porous substrates were infiltrated with a lanthania containing glass at a temperature of 1140°C-2h. The resulting ceramic composites exhibited high density, varying between 94 to 99% of the theoretical density, Vickers hardness ranging between 895 ± 14 HV and 1036 ± 33 HV, fracture strength ranging between 218 ± 28 MPa and 254 ± 18 MPa and a fracture toughness (KC) higher than 2.6 MPam1/2. Phase analysis of the infiltrated substrates by X-ray diffraction indicated the decomposition of aluminium titanate into alumina and titania besides the formation of lanthanum borosilicate, LaBSiO5. In addition, all compositions studied presented non-cytotoxic behaviour and low chemical solubility, inferior to 75 μg/cm2.
• Source:
  • Título: Ceramics international
  • ISSN: 02728842
  • Volume/Número/Paginação/Ano: v.46, n.2, p.2344-2354, 2020

Informações sobre o DOI: 10.1016/j.ceramint.2019.09.225 (Fonte: oaDOI API)
• Este periódico é de assinatura
• Este artigo NÃO é de acesso aberto
  
• Cor do Acesso Aberto: closed

---

How to cite

A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

• ABNT

  ALVES, MANUEL F.R.P. et al. Development of dense Al2O3-TiO2 ceramic composites by the glass-infiltration of porous substrates prepared from mechanical alloyed powders. Ceramics international, v. 46, n. 2, p. 2344-2354, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.ceramint.2019.09.225. Acesso em: 28 dez. 2025.

• APA

  ALVES, M. A. N. U. E. L. F. R. P., SANTOS, C. dos, COSSU, C. A. I. O. M. F. A., Suzuki, P. A., Ramos, A. S., RAMOS, E. C. T., et al. (2020). Development of dense Al2O3-TiO2 ceramic composites by the glass-infiltration of porous substrates prepared from mechanical alloyed powders. Ceramics international, 46( 2), 2344-2354. doi:10.1016/j.ceramint.2019.09.225

• NLM

  ALVES MANUELFRP, SANTOS C dos, COSSU CAIOMFA, Suzuki PA, Ramos AS, RAMOS ECT, SIMBA BRUNOGALVÃO, Strecker K. Development of dense Al2O3-TiO2 ceramic composites by the glass-infiltration of porous substrates prepared from mechanical alloyed powders [Internet]. Ceramics international. 2020 ;46( 2): 2344-2354.[citado 2025 dez. 28 ] Available from: https://doi.org/10.1016/j.ceramint.2019.09.225

• Vancouver

  ALVES MANUELFRP, SANTOS C dos, COSSU CAIOMFA, Suzuki PA, Ramos AS, RAMOS ECT, SIMBA BRUNOGALVÃO, Strecker K. Development of dense Al2O3-TiO2 ceramic composites by the glass-infiltration of porous substrates prepared from mechanical alloyed powders [Internet]. Ceramics international. 2020 ;46( 2): 2344-2354.[citado 2025 dez. 28 ] Available from: https://doi.org/10.1016/j.ceramint.2019.09.225

Últimas obras dos mesmos autores vinculados com a USP cadastradas na BDPI:

• Contribuição da difração de raios-X ao estudo dos compostos Bi-Sr-Co-O e de fitas supercondutoras à base de bismuto
• Investigação temática freireana em alunos do ensino médio de escola pública estadual
• Síntese e caracterização de compostos supercondutores 'Ln IND.2-X''M IND.X''CuO IND.4-Y'(Ln=Pr, Nd, Sm, Eu; M = Ce, Th, 0 '< OU =' X '< OU =' 0,20) preparados a partir de precursores sol-gel
• Alfabetização científica e humanização de Paulo Freire: revisão sistemática, análise textual e pesquisa qualitativa.
• Influence of Nb Addition on α″ and ω Phase Stability and on Mechanical Properties in the Ti-12Mo-xNb Stoichiometric System
• Effect of the cooling rate on the properties of veneer porcelain for zirconia dental prosthesis
• Subtle microstructural changes during prolonged annealing of ODS-Eurofer steel
• Mechanical properties of lithium metasilicate after short-term thermal treatments
• Effect of ionic plasma nitriding process on the corrosion and micro-abrasive wear behavior of AISI 316L austenitic and AISI 470 super-ferritic stainless steels
• Revisão bibliométrica sobre avaliação de funções executivas por meio do teste Torre de Londres: um estudo de aplicabilidade para o ensino.