Subtle microstructural changes during prolonged annealing of ODS-Eurofer steel (2023)
- Authors:
- USP affiliated authors: SANDIM, HUGO RICARDO ZSCHOMMLER - EEL ; SUZUKI, PAULO ATSUSHI - EEL
- Unidade: EEL
- DOI: 10.1016/j.nme.2023.101450
- Subjects: MATERIAIS; RECRISTALIZAÇÃO
- Keywords: ODS-Eurofer steel; Microstructural stability; Extended recovery; Recrystallization; Electron backscatter diffraction; Particle coarsening
- Agências de fomento:
- Language: Inglês
- Abstract: Reduced-activation ferritic-martensitic oxide-dispersion-strengthened (RAFM-ODS) Eurofer steel is a potential candidate material for structural applications in fusion reactors. Microstructural stability during long-term exposure at high temperatures is a key issue. Depending on the amount of prior cold-rolling strain and service temperature, important solid-state restoration reactions occur such as recovery, recrystallization and particle coarsening. ODS-Eurofer steel was cold rolled up to 80% reduction in thickness and annealed at 800 ◦C for durations up to 4320 h. Changes in microstructure were tracked by X-ray diffraction measurements using synchrotron radiation in post-mortem specimens to estimate dislocation character and density. The volume fraction of recrystallized grains was estimated using grain orientation spread (GOS) maps from electron backscatter diffraction (EBSD). Most of the softening occur in the first hour of annealing and it seems to be closely related to discontinuous recrystallization where a few special grain boundaries overcome Zener-Smith pinning effects caused by fine and stable Y2O3-based particles. M23C6 carbides undergo coarsening upon annealing and, as a result, extended recovery is the predominant softening mechanism as annealing proceeds, although only about 15% softening is noticed after annealing for 4320 h. Using thermodynamic and kinetic calculations, the results were extrapolated to the predicted service temperature of 650◦C. The results suggest that the remarkable microstructural stability of ODS-Eurofer would withstand almost 180 years at high service temperatures without major loss of the mechanical properties of the materials.
- Imprenta:
- Publisher: Elsevier
- Publisher place: St Paul les Durance
- Date published: 2023
- Source:
- Título: Nuclear Materials And Energy
- ISSN: 2352-1791
- Volume/Número/Paginação/Ano: v.35, p.1-10 , art. 101450, 2023
- Este periódico é de acesso aberto
- Este artigo é de acesso aberto
- URL de acesso aberto
- Cor do Acesso Aberto: gold
- Licença: cc-by
-
ABNT
ZILNYK, K. D. e SUZUKI, Paulo Atsushi e SANDIM, Hugo Ricardo Zschommler. Subtle microstructural changes during prolonged annealing of ODS-Eurofer steel. Nuclear Materials And Energy, v. 35, p. 1-10 , 2023Tradução . . Disponível em: https://doi.org/10.1016/j.nme.2023.101450. Acesso em: 28 dez. 2025. -
APA
Zilnyk, K. D., Suzuki, P. A., & Sandim, H. R. Z. (2023). Subtle microstructural changes during prolonged annealing of ODS-Eurofer steel. Nuclear Materials And Energy, 35, 1-10 . doi:10.1016/j.nme.2023.101450 -
NLM
Zilnyk KD, Suzuki PA, Sandim HRZ. Subtle microstructural changes during prolonged annealing of ODS-Eurofer steel [Internet]. Nuclear Materials And Energy. 2023 ;35 1-10 .[citado 2025 dez. 28 ] Available from: https://doi.org/10.1016/j.nme.2023.101450 -
Vancouver
Zilnyk KD, Suzuki PA, Sandim HRZ. Subtle microstructural changes during prolonged annealing of ODS-Eurofer steel [Internet]. Nuclear Materials And Energy. 2023 ;35 1-10 .[citado 2025 dez. 28 ] Available from: https://doi.org/10.1016/j.nme.2023.101450 - Excess aluminium effect on the composition and microstructure of Mo–Al alloys from aluminothermic reduction of MoO3
- Excess aluminium effect on the composition and microstructure of Mo-Al alloys from aluminothermic reduction of MoO <sub>3</sub>
- Contribuição da difração de raios-X ao estudo dos compostos Bi-Sr-Co-O e de fitas supercondutoras à base de bismuto
- In situ synchrotron X-ray evaluation of strain-induced martensite in AISI 201 austenitic stainless steel during tensile testing
- Recrystallization kinetics, mechanisms, and topology in alloys processed by laser powder-bed fusion: AISI 316L stainless steel as example
- Preparação de ligas 'NB'-'TI''O IND.2' por metalurgia do pó e sua caracterização microestrutural
- Investigação temática freireana em alunos do ensino médio de escola pública estadual
- Síntese e caracterização de compostos supercondutores 'Ln IND.2-X''M IND.X''CuO IND.4-Y'(Ln=Pr, Nd, Sm, Eu; M = Ce, Th, 0 '< OU =' X '< OU =' 0,20) preparados a partir de precursores sol-gel
- The origin of abnormal grain growth upon thermomechanical processing of laser powder-bed fusion alloys
- Alfabetização científica e humanização de Paulo Freire: revisão sistemática, análise textual e pesquisa qualitativa.
Informações sobre o DOI: 10.1016/j.nme.2023.101450 (Fonte: oaDOI API)
How to cite
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
