ReP USP - Resultado da busca

Artigo de periodico
Enhancing the flexural properties of CFRP with vacuum-assisted deposition of cellulose microfibrils to create a multiscale reinforcement network (2024)
Brito, Francisco Javier Goyo ; Silva, Marcelo de Assumpção Pereira da ; Tarpani, José Ricardo
Source: Composite Interfaces. Unidades: IFSC, EESC
Subjects: MATERIAIS, CELULOSE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BRITO, Francisco Javier Goyo e SILVA, Marcelo de Assumpção Pereira da e TARPANI, José Ricardo. Enhancing the flexural properties of CFRP with vacuum-assisted deposition of cellulose microfibrils to create a multiscale reinforcement network. Composite Interfaces, v. 31, n. 2, p. 239-260, 2024Tradução . . Disponível em: https://doi.org/10.1080/09276440.2023.2248771. Acesso em: 18 nov. 2024.
APA
Brito, F. J. G., Silva, M. de A. P. da, & Tarpani, J. R. (2024). Enhancing the flexural properties of CFRP with vacuum-assisted deposition of cellulose microfibrils to create a multiscale reinforcement network. Composite Interfaces, 31( 2), 239-260. doi:10.1080/09276440.2023.2248771
NLM
Brito FJG, Silva M de AP da, Tarpani JR. Enhancing the flexural properties of CFRP with vacuum-assisted deposition of cellulose microfibrils to create a multiscale reinforcement network [Internet]. Composite Interfaces. 2024 ; 31( 2): 239-260.[citado 2024 nov. 18 ] Available from: https://doi.org/10.1080/09276440.2023.2248771
Vancouver
Brito FJG, Silva M de AP da, Tarpani JR. Enhancing the flexural properties of CFRP with vacuum-assisted deposition of cellulose microfibrils to create a multiscale reinforcement network [Internet]. Composite Interfaces. 2024 ; 31( 2): 239-260.[citado 2024 nov. 18 ] Available from: https://doi.org/10.1080/09276440.2023.2248771
Artigo de periodico
Enhancing the wear performance of 316L stainless steel with Nb2O5 coatings deposited via DC sputtering at room temperature under varied environmental conditions (2024)
Ferreira, Murilo Oliveira Alves; Morgado, Victor Auricchio Fernandes; Santos, Kaue Ribeiro dos; Gelamo, Rogerio Valentim ; Mariani, Fábio Edson ; Slade, Natália Bueno Leite; Morais, Mateus Mota ; Fortulan, Carlos Alberto ; Galo, Rodrigo ; Jasinevicius, Renato Goulart ; Pinto, Haroldo Cavalcanti ; Moreto, Jéferson Aparecido
Source: Lubricants. Unidades: EESC, FORP
Subjects: AÇO INOXIDÁVEL, DESGASTE DOS MATERIAIS, NIÓBIO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERREIRA, Murilo Oliveira Alves et al. Enhancing the wear performance of 316L stainless steel with Nb2O5 coatings deposited via DC sputtering at room temperature under varied environmental conditions. Lubricants, v. 12, n. 10, p. 1-16, 2024Tradução . . Disponível em: http://dx.doi.org/10.3390/lubricants12100345. Acesso em: 18 nov. 2024.
APA
Ferreira, M. O. A., Morgado, V. A. F., Santos, K. R. dos, Gelamo, R. V., Mariani, F. E., Slade, N. B. L., et al. (2024). Enhancing the wear performance of 316L stainless steel with Nb2O5 coatings deposited via DC sputtering at room temperature under varied environmental conditions. Lubricants, 12( 10), 1-16. doi:10.3390/lubricants12100345
NLM
Ferreira MOA, Morgado VAF, Santos KR dos, Gelamo RV, Mariani FE, Slade NBL, Morais MM, Fortulan CA, Galo R, Jasinevicius RG, Pinto HC, Moreto JA. Enhancing the wear performance of 316L stainless steel with Nb2O5 coatings deposited via DC sputtering at room temperature under varied environmental conditions [Internet]. Lubricants. 2024 ; 12( 10): 1-16.[citado 2024 nov. 18 ] Available from: http://dx.doi.org/10.3390/lubricants12100345
Vancouver
Ferreira MOA, Morgado VAF, Santos KR dos, Gelamo RV, Mariani FE, Slade NBL, Morais MM, Fortulan CA, Galo R, Jasinevicius RG, Pinto HC, Moreto JA. Enhancing the wear performance of 316L stainless steel with Nb2O5 coatings deposited via DC sputtering at room temperature under varied environmental conditions [Internet]. Lubricants. 2024 ; 12( 10): 1-16.[citado 2024 nov. 18 ] Available from: http://dx.doi.org/10.3390/lubricants12100345
Artigo de periodico
Impact performance of egg-box core sandwich panels madefrom sisal fibers and castor-oil-based polymer (2024)
Santos, Júlio Cesar dos; Silva, Rodrigo J. da; Christoforo, André Luis ; Freire, Rodrigo Teixeira Santos; Tarpani, José Ricardo ; Scarpa, Fabrizio; Panzera, Túlio Hallak
Source: Polymer Composites. Unidade: EESC
Subjects: POLÍMEROS (MATERIAIS), PAINÉIS SANDWICH, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Júlio Cesar dos et al. Impact performance of egg-box core sandwich panels madefrom sisal fibers and castor-oil-based polymer. Polymer Composites, p. 1-9, 2024Tradução . . Disponível em: http://dx.doi.org/10.1002/pc.29123. Acesso em: 18 nov. 2024.
APA
Santos, J. C. dos, Silva, R. J. da, Christoforo, A. L., Freire, R. T. S., Tarpani, J. R., Scarpa, F., & Panzera, T. H. (2024). Impact performance of egg-box core sandwich panels madefrom sisal fibers and castor-oil-based polymer. Polymer Composites, 1-9. doi:10.1002/pc.29123
NLM
Santos JC dos, Silva RJ da, Christoforo AL, Freire RTS, Tarpani JR, Scarpa F, Panzera TH. Impact performance of egg-box core sandwich panels madefrom sisal fibers and castor-oil-based polymer [Internet]. Polymer Composites. 2024 ; 1-9.[citado 2024 nov. 18 ] Available from: http://dx.doi.org/10.1002/pc.29123
Vancouver
Santos JC dos, Silva RJ da, Christoforo AL, Freire RTS, Tarpani JR, Scarpa F, Panzera TH. Impact performance of egg-box core sandwich panels madefrom sisal fibers and castor-oil-based polymer [Internet]. Polymer Composites. 2024 ; 1-9.[citado 2024 nov. 18 ] Available from: http://dx.doi.org/10.1002/pc.29123
Artigo de periodico
Environmentally friendly synthesis of In2O3 nano octahedrons by cellulose nanofiber template-assisted route and their potential application for O3 gas sensing (2024)
Leite, Ramon Resende; Komorizono, Amanda Akemy; Bernardi, Maria Inês Basso ; Carvalho, Antonio Jose Felix ; Mastelaro, Valmor Roberto
Source: Ceramics International. Unidades: EESC, IFSC
Subjects: SENSOR, MATERIAIS NANOESTRUTURADOS, CELULOSE, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LEITE, Ramon Resende et al. Environmentally friendly synthesis of In2O3 nano octahedrons by cellulose nanofiber template-assisted route and their potential application for O3 gas sensing. Ceramics International, v. 50, n. 7, p. 10192-10202, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.ceramint.2023.12.329. Acesso em: 18 nov. 2024.
APA
Leite, R. R., Komorizono, A. A., Bernardi, M. I. B., Carvalho, A. J. F., & Mastelaro, V. R. (2024). Environmentally friendly synthesis of In2O3 nano octahedrons by cellulose nanofiber template-assisted route and their potential application for O3 gas sensing. Ceramics International, 50( 7), 10192-10202. doi:10.1016/j.ceramint.2023.12.329
NLM
Leite RR, Komorizono AA, Bernardi MIB, Carvalho AJF, Mastelaro VR. Environmentally friendly synthesis of In2O3 nano octahedrons by cellulose nanofiber template-assisted route and their potential application for O3 gas sensing [Internet]. Ceramics International. 2024 ; 50( 7): 10192-10202.[citado 2024 nov. 18 ] Available from: http://dx.doi.org/10.1016/j.ceramint.2023.12.329
Vancouver
Leite RR, Komorizono AA, Bernardi MIB, Carvalho AJF, Mastelaro VR. Environmentally friendly synthesis of In2O3 nano octahedrons by cellulose nanofiber template-assisted route and their potential application for O3 gas sensing [Internet]. Ceramics International. 2024 ; 50( 7): 10192-10202.[citado 2024 nov. 18 ] Available from: http://dx.doi.org/10.1016/j.ceramint.2023.12.329
Artigo de periodico
One-pot synthesis of copolymers through the application of the thermally reversible furan/maleimide diels–alder reaction. 2. preparation of polyester–polyurethane copolymers (2024)
Trovatti, Eliane ; Ferreira, Antônio Gilberto ; Carvalho, Antonio Jose Felix ; Gandini, Alessandro
Source: Polymer Bulletin. Unidade: EESC
Subjects: POLÍMEROS (MATERIAIS), POLIÉSTER, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TROVATTI, Eliane et al. One-pot synthesis of copolymers through the application of the thermally reversible furan/maleimide diels–alder reaction. 2. preparation of polyester–polyurethane copolymers. Polymer Bulletin, p. 1-16, 2024Tradução . . Disponível em: https://doi.org/10.1007/s00289-022-04385-x. Acesso em: 18 nov. 2024.
APA
Trovatti, E., Ferreira, A. G., Carvalho, A. J. F., & Gandini, A. (2024). One-pot synthesis of copolymers through the application of the thermally reversible furan/maleimide diels–alder reaction. 2. preparation of polyester–polyurethane copolymers. Polymer Bulletin, 1-16. doi:10.1007/s00289-024-05441-4
NLM
Trovatti E, Ferreira AG, Carvalho AJF, Gandini A. One-pot synthesis of copolymers through the application of the thermally reversible furan/maleimide diels–alder reaction. 2. preparation of polyester–polyurethane copolymers [Internet]. Polymer Bulletin. 2024 ; 1-16.[citado 2024 nov. 18 ] Available from: https://doi.org/10.1007/s00289-022-04385-x
Vancouver
Trovatti E, Ferreira AG, Carvalho AJF, Gandini A. One-pot synthesis of copolymers through the application of the thermally reversible furan/maleimide diels–alder reaction. 2. preparation of polyester–polyurethane copolymers [Internet]. Polymer Bulletin. 2024 ; 1-16.[citado 2024 nov. 18 ] Available from: https://doi.org/10.1007/s00289-022-04385-x
Trabalho de evento-resumo
Chemical synthesis of nickel nanoparticles embedded in graphitic carbon nitride as HER electrocatalyst for water splitting systems (2024)
Delfino, Gustavo Moreira; Mehmood, Rashid; Rêgo, Galtiere Corrêa ; Rosa, Washington Santa ; Gonçalves, Renato Vitalino ; Moreto, Jéferson Aparecido ; Pinto, Haroldo Cavalcanti
Source: Presentation program. Conference titles: Brazil MRS Meeting. Unidades: IFSC, EESC
Subjects: NANOPARTÍCULAS, ESPECTROSCOPIA, ELETROCATÁLISE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DELFINO, Gustavo Moreira et al. Chemical synthesis of nickel nanoparticles embedded in graphitic carbon nitride as HER electrocatalyst for water splitting systems. 2024, Anais.. Rio de Janeiro: Sociedade Brasileira de Pesquisa em Materiais - SBPMat, 2024. Disponível em: https://www.eventweb.com.br/xxiisbpmat/specific-files/manuscripts/xxiisbpmat/1056_1725295691.pdf. Acesso em: 18 nov. 2024.
APA
Delfino, G. M., Mehmood, R., Rêgo, G. C., Rosa, W. S., Gonçalves, R. V., Moreto, J. A., & Pinto, H. C. (2024). Chemical synthesis of nickel nanoparticles embedded in graphitic carbon nitride as HER electrocatalyst for water splitting systems. In Presentation program. Rio de Janeiro: Sociedade Brasileira de Pesquisa em Materiais - SBPMat. Recuperado de https://www.eventweb.com.br/xxiisbpmat/specific-files/manuscripts/xxiisbpmat/1056_1725295691.pdf
NLM
Delfino GM, Mehmood R, Rêgo GC, Rosa WS, Gonçalves RV, Moreto JA, Pinto HC. Chemical synthesis of nickel nanoparticles embedded in graphitic carbon nitride as HER electrocatalyst for water splitting systems [Internet]. Presentation program. 2024 ;[citado 2024 nov. 18 ] Available from: https://www.eventweb.com.br/xxiisbpmat/specific-files/manuscripts/xxiisbpmat/1056_1725295691.pdf
Vancouver
Delfino GM, Mehmood R, Rêgo GC, Rosa WS, Gonçalves RV, Moreto JA, Pinto HC. Chemical synthesis of nickel nanoparticles embedded in graphitic carbon nitride as HER electrocatalyst for water splitting systems [Internet]. Presentation program. 2024 ;[citado 2024 nov. 18 ] Available from: https://www.eventweb.com.br/xxiisbpmat/specific-files/manuscripts/xxiisbpmat/1056_1725295691.pdf
Artigo de periodico
Novel colloidal silica technology for in situ spinelization in MgO-containing refractories (2024)
Salomão, Rafael ; Fernandes, Leandro; Sundblom, Andreas; Greenwood, Peter; Martinatti, Isabela Santos; Tiba, Paulo Roberto Teruo
Source: Materials Research. Unidade: EESC
Subjects: SINTER, REFRATÁRIOS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SALOMÃO, Rafael et al. Novel colloidal silica technology for in situ spinelization in MgO-containing refractories. Materials Research, v. 27, p. 1-13, 2024Tradução . . Disponível em: http://dx.doi.org/10.1590/1980-5373-MR-2023-0438. Acesso em: 18 nov. 2024.
APA
Salomão, R., Fernandes, L., Sundblom, A., Greenwood, P., Martinatti, I. S., & Tiba, P. R. T. (2024). Novel colloidal silica technology for in situ spinelization in MgO-containing refractories. Materials Research, 27, 1-13. doi:10.1590/1980-5373-MR-2023-0438
NLM
Salomão R, Fernandes L, Sundblom A, Greenwood P, Martinatti IS, Tiba PRT. Novel colloidal silica technology for in situ spinelization in MgO-containing refractories [Internet]. Materials Research. 2024 ; 27 1-13.[citado 2024 nov. 18 ] Available from: http://dx.doi.org/10.1590/1980-5373-MR-2023-0438
Vancouver
Salomão R, Fernandes L, Sundblom A, Greenwood P, Martinatti IS, Tiba PRT. Novel colloidal silica technology for in situ spinelization in MgO-containing refractories [Internet]. Materials Research. 2024 ; 27 1-13.[citado 2024 nov. 18 ] Available from: http://dx.doi.org/10.1590/1980-5373-MR-2023-0438
Artigo de periodico
An experimental investigation of the mechanical properties and failure mode of 3D stitched composites (2024)
Reis, Lucas Moura Montenegro; Ribeiro, Marcelo Leite ; Madureira, Fernando; Morelli, Arnaldo Carlos; Monteiro, Sergio Neves; Arantes, Vera Lúcia
Source: Journal of Materials Research and Technology. Unidade: EESC
Subjects: 3-D VER TERCEIRA DIMENSÃO., TENACIDADE DOS MATERIAIS, MATERIAIS COMPÓSITOS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
REIS, Lucas Moura Montenegro et al. An experimental investigation of the mechanical properties and failure mode of 3D stitched composites. Journal of Materials Research and Technology, v. 29, p. 90-100, 2024Tradução . . Disponível em: https://dx.doi.org/10.1016/j.jmrt.2023.12.283. Acesso em: 18 nov. 2024.
APA
Reis, L. M. M., Ribeiro, M. L., Madureira, F., Morelli, A. C., Monteiro, S. N., & Arantes, V. L. (2024). An experimental investigation of the mechanical properties and failure mode of 3D stitched composites. Journal of Materials Research and Technology, 29, 90-100. doi:10.1016/j.jmrt.2023.12.283
NLM
Reis LMM, Ribeiro ML, Madureira F, Morelli AC, Monteiro SN, Arantes VL. An experimental investigation of the mechanical properties and failure mode of 3D stitched composites [Internet]. Journal of Materials Research and Technology. 2024 ; 29 90-100.[citado 2024 nov. 18 ] Available from: https://dx.doi.org/10.1016/j.jmrt.2023.12.283
Vancouver
Reis LMM, Ribeiro ML, Madureira F, Morelli AC, Monteiro SN, Arantes VL. An experimental investigation of the mechanical properties and failure mode of 3D stitched composites [Internet]. Journal of Materials Research and Technology. 2024 ; 29 90-100.[citado 2024 nov. 18 ] Available from: https://dx.doi.org/10.1016/j.jmrt.2023.12.283
Artigo de periodico
Influence of multilayer nanoarchitecture on phase transformations in the Ti-Cr-Zr system (2024)
Pereira, Julia Nascimento; Ott, Vincent; Afonso, Conrado Ramos Moreira; Malafaia, Artur Mariano de Sousa; Stüber, Michael; Greiner, Christian; Pinto, Haroldo Cavalcanti
Source: Surface and Coatings Technology. Unidade: EESC
Subjects: MATERIAIS NANOESTRUTURADOS, METAIS, TRATAMENTO TÉRMICO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Julia Nascimento et al. Influence of multilayer nanoarchitecture on phase transformations in the Ti-Cr-Zr system. Surface and Coatings Technology, v. 477, p. 1-11, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.surfcoat.2023.130369. Acesso em: 18 nov. 2024.
APA
Pereira, J. N., Ott, V., Afonso, C. R. M., Malafaia, A. M. de S., Stüber, M., Greiner, C., & Pinto, H. C. (2024). Influence of multilayer nanoarchitecture on phase transformations in the Ti-Cr-Zr system. Surface and Coatings Technology, 477, 1-11. doi:10.1016/j.surfcoat.2023.130369
NLM
Pereira JN, Ott V, Afonso CRM, Malafaia AM de S, Stüber M, Greiner C, Pinto HC. Influence of multilayer nanoarchitecture on phase transformations in the Ti-Cr-Zr system [Internet]. Surface and Coatings Technology. 2024 ; 477 1-11.[citado 2024 nov. 18 ] Available from: http://dx.doi.org/10.1016/j.surfcoat.2023.130369
Vancouver
Pereira JN, Ott V, Afonso CRM, Malafaia AM de S, Stüber M, Greiner C, Pinto HC. Influence of multilayer nanoarchitecture on phase transformations in the Ti-Cr-Zr system [Internet]. Surface and Coatings Technology. 2024 ; 477 1-11.[citado 2024 nov. 18 ] Available from: http://dx.doi.org/10.1016/j.surfcoat.2023.130369
Artigo de periodico
Physical and microstructural properties of coconut (Cocos nucifera) particleboards bound with castor oil-based polyurethane resin (2024)
Bispo, Rodrigo Andraus; Rodrigues, Felipe Reis; Cazella, Pedro Henrique da Silva; Silva, Sérgio Augusto Mello da; Aquino, Vinicius Borges de Moura ; Moreto, Jeferson Aparecido; Chahud, Eduardo; Branco, Luiz Antônio Melgaço Nunes; Santos, Herisson Ferreira dos; Lahr, Francisco Antonio Rocco ; Christoforo, André Luis
Source: BioResources. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS DE FIBRAS, COCO, PAINÉIS, MAMONA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BISPO, Rodrigo Andraus et al. Physical and microstructural properties of coconut (Cocos nucifera) particleboards bound with castor oil-based polyurethane resin. BioResources, v. 19, n. 3, p. 6559-6568, 2024Tradução . . Disponível em: http://dx.doi.org/10.15376/biores.19.3.6559-6568. Acesso em: 18 nov. 2024.
APA
Bispo, R. A., Rodrigues, F. R., Cazella, P. H. da S., Silva, S. A. M. da, Aquino, V. B. de M., Moreto, J. A., et al. (2024). Physical and microstructural properties of coconut (Cocos nucifera) particleboards bound with castor oil-based polyurethane resin. BioResources, 19( 3), 6559-6568. doi:10.15376/biores.19.3.6559-6568
NLM
Bispo RA, Rodrigues FR, Cazella PH da S, Silva SAM da, Aquino VB de M, Moreto JA, Chahud E, Branco LAMN, Santos HF dos, Lahr FAR, Christoforo AL. Physical and microstructural properties of coconut (Cocos nucifera) particleboards bound with castor oil-based polyurethane resin [Internet]. BioResources. 2024 ; 19( 3): 6559-6568.[citado 2024 nov. 18 ] Available from: http://dx.doi.org/10.15376/biores.19.3.6559-6568
Vancouver
Bispo RA, Rodrigues FR, Cazella PH da S, Silva SAM da, Aquino VB de M, Moreto JA, Chahud E, Branco LAMN, Santos HF dos, Lahr FAR, Christoforo AL. Physical and microstructural properties of coconut (Cocos nucifera) particleboards bound with castor oil-based polyurethane resin [Internet]. BioResources. 2024 ; 19( 3): 6559-6568.[citado 2024 nov. 18 ] Available from: http://dx.doi.org/10.15376/biores.19.3.6559-6568
Artigo de periodico
Exploring Corymbia torelliana hydrochar combustion kinetics through thermogravimetric analysis, peak deconvolution and reaction profle modelling (2024)
Rocha, Juliano Jose Mota da; Santana Junior, José Alair; Sousa, Nádia Guimarães; Cardoso, Cássia Regina; Moreto, Jéferson Aparecido ; Oliveira, Tiago Jose Pires de
Source: Environmental Science and Pollution Research. Unidade: EESC
Subjects: MADEIRA, BIOCOMBUSTÍVEIS, COMBUSTÃO, CARBONIZAÇÃO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ROCHA, Juliano Jose Mota da et al. Exploring Corymbia torelliana hydrochar combustion kinetics through thermogravimetric analysis, peak deconvolution and reaction profle modelling. Environmental Science and Pollution Research, v. 31, n. 45, p. 56482-56498, 2024Tradução . . Disponível em: https://dx.doi.org/10.1007/s11356-024-34887-2. Acesso em: 18 nov. 2024.
APA
Rocha, J. J. M. da, Santana Junior, J. A., Sousa, N. G., Cardoso, C. R., Moreto, J. A., & Oliveira, T. J. P. de. (2024). Exploring Corymbia torelliana hydrochar combustion kinetics through thermogravimetric analysis, peak deconvolution and reaction profle modelling. Environmental Science and Pollution Research, 31( 45), 56482-56498. doi:10.1007/s11356-024-34887-2
NLM
Rocha JJM da, Santana Junior JA, Sousa NG, Cardoso CR, Moreto JA, Oliveira TJP de. Exploring Corymbia torelliana hydrochar combustion kinetics through thermogravimetric analysis, peak deconvolution and reaction profle modelling [Internet]. Environmental Science and Pollution Research. 2024 ; 31( 45): 56482-56498.[citado 2024 nov. 18 ] Available from: https://dx.doi.org/10.1007/s11356-024-34887-2
Vancouver
Rocha JJM da, Santana Junior JA, Sousa NG, Cardoso CR, Moreto JA, Oliveira TJP de. Exploring Corymbia torelliana hydrochar combustion kinetics through thermogravimetric analysis, peak deconvolution and reaction profle modelling [Internet]. Environmental Science and Pollution Research. 2024 ; 31( 45): 56482-56498.[citado 2024 nov. 18 ] Available from: https://dx.doi.org/10.1007/s11356-024-34887-2
Artigo de periodico
Effect of stress relief and solubilization heat treatments on laser additive manufactured Inconel 625: microstructure and properties (2024)
Bon, Douglas Geovanni; Cavalcanti, Thiago; Thiesen, Anselmo; Santos, Henrique; Gutjhar, Jhonattan; Cintho, Osvaldo Mitsuyuki ; Coelho, Reginaldo Teixeira ; Oliveira, Marcelo Falcão de ; Ribamar, Giovani Gonçalves; Avila, Julian Arnaldo
Source: International Journal of Advanced Manufacturing Technology. Unidades: EESC, EP
Subjects: MANUFATURA ADITIVA, LASER, CALOR, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BON, Douglas Geovanni et al. Effect of stress relief and solubilization heat treatments on laser additive manufactured Inconel 625: microstructure and properties. International Journal of Advanced Manufacturing Technology, v. 130, n. 9-10, p. 4919-4931, 2024Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-024-12967-4. Acesso em: 18 nov. 2024.
APA
Bon, D. G., Cavalcanti, T., Thiesen, A., Santos, H., Gutjhar, J., Cintho, O. M., et al. (2024). Effect of stress relief and solubilization heat treatments on laser additive manufactured Inconel 625: microstructure and properties. International Journal of Advanced Manufacturing Technology, 130( 9-10), 4919-4931. doi:10.1007/s00170-024-12967-4
NLM
Bon DG, Cavalcanti T, Thiesen A, Santos H, Gutjhar J, Cintho OM, Coelho RT, Oliveira MF de, Ribamar GG, Avila JA. Effect of stress relief and solubilization heat treatments on laser additive manufactured Inconel 625: microstructure and properties [Internet]. International Journal of Advanced Manufacturing Technology. 2024 ; 130( 9-10): 4919-4931.[citado 2024 nov. 18 ] Available from: http://dx.doi.org/10.1007/s00170-024-12967-4
Vancouver
Bon DG, Cavalcanti T, Thiesen A, Santos H, Gutjhar J, Cintho OM, Coelho RT, Oliveira MF de, Ribamar GG, Avila JA. Effect of stress relief and solubilization heat treatments on laser additive manufactured Inconel 625: microstructure and properties [Internet]. International Journal of Advanced Manufacturing Technology. 2024 ; 130( 9-10): 4919-4931.[citado 2024 nov. 18 ] Available from: http://dx.doi.org/10.1007/s00170-024-12967-4
Artigo de periodico
Thermoplastic chitosan plasticized with deep eutectic solvent derived from gamma-valerolactone (2024)
Alves, Ana Clara Lancarovici; Santos, Camila Souza ; Burtoloso, Antonio Carlos Bender ; Carvalho, Antonio Jose Felix
Source: Journal of Polymers and the Environment. Unidades: EESC, IQSC
Subjects: QUITOSANA, TERMOPLÁSTICOS, POLÍMEROS (MATERIAIS), PLÁSTICOS BIODEGRADÁVEIS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALVES, Ana Clara Lancarovici et al. Thermoplastic chitosan plasticized with deep eutectic solvent derived from gamma-valerolactone. Journal of Polymers and the Environment, p. 1-13, 2024Tradução . . Disponível em: https://dx.doi.org/10.1007/s10924-024-03305-6. Acesso em: 18 nov. 2024.
APA
Alves, A. C. L., Santos, C. S., Burtoloso, A. C. B., & Carvalho, A. J. F. (2024). Thermoplastic chitosan plasticized with deep eutectic solvent derived from gamma-valerolactone. Journal of Polymers and the Environment, 1-13. doi:10.1007/s10924-024-03305-6
NLM
Alves ACL, Santos CS, Burtoloso ACB, Carvalho AJF. Thermoplastic chitosan plasticized with deep eutectic solvent derived from gamma-valerolactone [Internet]. Journal of Polymers and the Environment. 2024 ; 1-13.[citado 2024 nov. 18 ] Available from: https://dx.doi.org/10.1007/s10924-024-03305-6
Vancouver
Alves ACL, Santos CS, Burtoloso ACB, Carvalho AJF. Thermoplastic chitosan plasticized with deep eutectic solvent derived from gamma-valerolactone [Internet]. Journal of Polymers and the Environment. 2024 ; 1-13.[citado 2024 nov. 18 ] Available from: https://dx.doi.org/10.1007/s10924-024-03305-6
Artigo de periodico
Wear-resistant CrCoNi nanocrystalline film via friction-driven surface segregation (2024)
Qing, Zhou; Zhichao Jiao; Yeran, Shi; Yulong, Li; Cunhong, Yin; Haifeng, Wang; Pinto, Haroldo Cavalcanti ; Greiner, Christian; Weimin, Liu
Source: Acta Materialia. Unidade: EESC
Subjects: FILMES FINOS, NANOCOMPOSITOS, DESGASTE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
QING, Zhou et al. Wear-resistant CrCoNi nanocrystalline film via friction-driven surface segregation. Acta Materialia, v. 279, p. 1-16, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.actamat.2024.120299. Acesso em: 18 nov. 2024.
APA
Qing, Z., Zhichao Jiao,, Yeran, S., Yulong, L., Cunhong, Y., Haifeng, W., et al. (2024). Wear-resistant CrCoNi nanocrystalline film via friction-driven surface segregation. Acta Materialia, 279, 1-16. doi:10.1016/j.actamat.2024.120299
NLM
Qing Z, Zhichao Jiao, Yeran S, Yulong L, Cunhong Y, Haifeng W, Pinto HC, Greiner C, Weimin L. Wear-resistant CrCoNi nanocrystalline film via friction-driven surface segregation [Internet]. Acta Materialia. 2024 ; 279 1-16.[citado 2024 nov. 18 ] Available from: http://dx.doi.org/10.1016/j.actamat.2024.120299
Vancouver
Qing Z, Zhichao Jiao, Yeran S, Yulong L, Cunhong Y, Haifeng W, Pinto HC, Greiner C, Weimin L. Wear-resistant CrCoNi nanocrystalline film via friction-driven surface segregation [Internet]. Acta Materialia. 2024 ; 279 1-16.[citado 2024 nov. 18 ] Available from: http://dx.doi.org/10.1016/j.actamat.2024.120299
Artigo de periodico
Evaluating the residual stresses and fracture behavior of glass-ceramics by numerical modeling (2024)
Fonseca, Johnata Cavalcanti; Paccola, Rodrigo Ribeiro ; Zanotto, Edgar Dutra ; Ferreira, Eduardo Bellini
Source: Acta Materialia. Unidade: EESC
Subjects: VIDRO CERÂMICO, TENSÃO RESIDUAL, MÉTODO DOS ELEMENTOS FINITOS, FRATURA DAS ESTRUTURAS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FONSECA, Johnata Cavalcanti et al. Evaluating the residual stresses and fracture behavior of glass-ceramics by numerical modeling. Acta Materialia, v. 274, p. 1-12, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.actamat.2024.120015. Acesso em: 18 nov. 2024.
APA
Fonseca, J. C., Paccola, R. R., Zanotto, E. D., & Ferreira, E. B. (2024). Evaluating the residual stresses and fracture behavior of glass-ceramics by numerical modeling. Acta Materialia, 274, 1-12. doi:10.1016/j.actamat.2024.120015
NLM
Fonseca JC, Paccola RR, Zanotto ED, Ferreira EB. Evaluating the residual stresses and fracture behavior of glass-ceramics by numerical modeling [Internet]. Acta Materialia. 2024 ; 274 1-12.[citado 2024 nov. 18 ] Available from: http://dx.doi.org/10.1016/j.actamat.2024.120015
Vancouver
Fonseca JC, Paccola RR, Zanotto ED, Ferreira EB. Evaluating the residual stresses and fracture behavior of glass-ceramics by numerical modeling [Internet]. Acta Materialia. 2024 ; 274 1-12.[citado 2024 nov. 18 ] Available from: http://dx.doi.org/10.1016/j.actamat.2024.120015
Artigo de periodico
Lower corrosion resistance of the nitrocarburized layer formed on two supermartensitic stainless steel types (2024)
Rodrigues, Cesar Augusto Duarte ; Casteletti, Luiz Carlos ; Fernandes, Frederico Augusto Pires; Picon, Carlos Alberto; Tremiliosi Filho, Germano
Source: REM- International Engineering Journal. Unidades: EESC, IQSC
Subjects: CORROSÃO, NIÓBIO, AÇO INOXIDÁVEL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RODRIGUES, Cesar Augusto Duarte et al. Lower corrosion resistance of the nitrocarburized layer formed on two supermartensitic stainless steel types. REM- International Engineering Journal, v. 77, n. 4, 2024Tradução . . Disponível em: https://doi.org/10.1590/0370-44672023770104. Acesso em: 18 nov. 2024.
APA
Rodrigues, C. A. D., Casteletti, L. C., Fernandes, F. A. P., Picon, C. A., & Tremiliosi Filho, G. (2024). Lower corrosion resistance of the nitrocarburized layer formed on two supermartensitic stainless steel types. REM- International Engineering Journal, 77( 4). doi:10.1590/0370-44672023770104
NLM
Rodrigues CAD, Casteletti LC, Fernandes FAP, Picon CA, Tremiliosi Filho G. Lower corrosion resistance of the nitrocarburized layer formed on two supermartensitic stainless steel types [Internet]. REM- International Engineering Journal. 2024 ;77( 4):[citado 2024 nov. 18 ] Available from: https://doi.org/10.1590/0370-44672023770104
Vancouver
Rodrigues CAD, Casteletti LC, Fernandes FAP, Picon CA, Tremiliosi Filho G. Lower corrosion resistance of the nitrocarburized layer formed on two supermartensitic stainless steel types [Internet]. REM- International Engineering Journal. 2024 ;77( 4):[citado 2024 nov. 18 ] Available from: https://doi.org/10.1590/0370-44672023770104
Artigo de periodico
Processing and the effect of Nb–Mo on the microstructure, mechanical and tribological behavior of high-Cr cast iron (2024)
Rêgo, Galtiere Corrêa ; Rodrigues Neto, José Benedito Tosoni Decarlis; Triani, Rafael Magalhães ; Mehmood, Rashid; Mativejić, Božidar; Casteletti, Luiz Carlos
Source: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. Unidade: EESC
Subjects: FERRO FUNDIDO, DESGASTE DOS MATERIAIS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RÊGO, Galtiere Corrêa et al. Processing and the effect of Nb–Mo on the microstructure, mechanical and tribological behavior of high-Cr cast iron. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, p. 1-7, 2024Tradução . . Disponível em: http://dx.doi.org/10.1007/s11661-024-07598-z. Acesso em: 18 nov. 2024.
APA
Rêgo, G. C., Rodrigues Neto, J. B. T. D., Triani, R. M., Mehmood, R., Mativejić, B., & Casteletti, L. C. (2024). Processing and the effect of Nb–Mo on the microstructure, mechanical and tribological behavior of high-Cr cast iron. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 1-7. doi:10.1007/s11661-024-07598-z
NLM
Rêgo GC, Rodrigues Neto JBTD, Triani RM, Mehmood R, Mativejić B, Casteletti LC. Processing and the effect of Nb–Mo on the microstructure, mechanical and tribological behavior of high-Cr cast iron [Internet]. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 2024 ; 1-7.[citado 2024 nov. 18 ] Available from: http://dx.doi.org/10.1007/s11661-024-07598-z
Vancouver
Rêgo GC, Rodrigues Neto JBTD, Triani RM, Mehmood R, Mativejić B, Casteletti LC. Processing and the effect of Nb–Mo on the microstructure, mechanical and tribological behavior of high-Cr cast iron [Internet]. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 2024 ; 1-7.[citado 2024 nov. 18 ] Available from: http://dx.doi.org/10.1007/s11661-024-07598-z
Artigo de periodico
Evaluation of the efects of extrusion parameters on the swelling of extruded flament in an innovative 3D printer containing a vertical co-rotating twin-screw extrusion unit (2024)
Silva, Dávila Moreira Lopes; Barbosa, Patricia Alves; Chinelatto, Marcelo Aparecido ; Silveira, Zilda de Castro
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: EXTRUSÃO, IMPRESSÃO 3-D, CISALHAMENTO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Dávila Moreira Lopes et al. Evaluation of the efects of extrusion parameters on the swelling of extruded flament in an innovative 3D printer containing a vertical co-rotating twin-screw extrusion unit. International Journal of Advanced Manufacturing Technology, v. 134, p. 2217-2232, 2024Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-024-14233-z. Acesso em: 18 nov. 2024.
APA
Silva, D. M. L., Barbosa, P. A., Chinelatto, M. A., & Silveira, Z. de C. (2024). Evaluation of the efects of extrusion parameters on the swelling of extruded flament in an innovative 3D printer containing a vertical co-rotating twin-screw extrusion unit. International Journal of Advanced Manufacturing Technology, 134, 2217-2232. doi:10.1007/s00170-024-14233-z
NLM
Silva DML, Barbosa PA, Chinelatto MA, Silveira Z de C. Evaluation of the efects of extrusion parameters on the swelling of extruded flament in an innovative 3D printer containing a vertical co-rotating twin-screw extrusion unit [Internet]. International Journal of Advanced Manufacturing Technology. 2024 ; 134 2217-2232.[citado 2024 nov. 18 ] Available from: http://dx.doi.org/10.1007/s00170-024-14233-z
Vancouver
Silva DML, Barbosa PA, Chinelatto MA, Silveira Z de C. Evaluation of the efects of extrusion parameters on the swelling of extruded flament in an innovative 3D printer containing a vertical co-rotating twin-screw extrusion unit [Internet]. International Journal of Advanced Manufacturing Technology. 2024 ; 134 2217-2232.[citado 2024 nov. 18 ] Available from: http://dx.doi.org/10.1007/s00170-024-14233-z
Artigo de periodico
Effect of borosilicate residue as flame retardant and reinforcement filler in polypropylene/natural fiber composites (2024)
Poletto, Murillo Ricardo Lombardo; Callegari, Bruna; Ferreira, Eduardo Bellini ; Branciforti, Márcia Cristina
Source: Journal of Applied Polymer Science. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, FIBRAS NATURAIS, POLÍMEROS (MATERIAIS), MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
POLETTO, Murillo Ricardo Lombardo et al. Effect of borosilicate residue as flame retardant and reinforcement filler in polypropylene/natural fiber composites. Journal of Applied Polymer Science, p. 1-9, 2024Tradução . . Disponível em: https://dx.doi.org/10.1002/app.56166. Acesso em: 18 nov. 2024.
APA
Poletto, M. R. L., Callegari, B., Ferreira, E. B., & Branciforti, M. C. (2024). Effect of borosilicate residue as flame retardant and reinforcement filler in polypropylene/natural fiber composites. Journal of Applied Polymer Science, 1-9. doi:10.1002/app.56166
NLM
Poletto MRL, Callegari B, Ferreira EB, Branciforti MC. Effect of borosilicate residue as flame retardant and reinforcement filler in polypropylene/natural fiber composites [Internet]. Journal of Applied Polymer Science. 2024 ; 1-9.[citado 2024 nov. 18 ] Available from: https://dx.doi.org/10.1002/app.56166
Vancouver
Poletto MRL, Callegari B, Ferreira EB, Branciforti MC. Effect of borosilicate residue as flame retardant and reinforcement filler in polypropylene/natural fiber composites [Internet]. Journal of Applied Polymer Science. 2024 ; 1-9.[citado 2024 nov. 18 ] Available from: https://dx.doi.org/10.1002/app.56166
Artigo de periodico
Effects of niobium and molybdenum addition on microstructural characteristics and wear properties of 14 wt%Cr white cast irons (2024)
Rêgo, Galtiere Corrêa ; van Drunen, Julia; Matijevic, Bozidar; Canale, Lauralice de Campos Franceschini ; Pinto, Haroldo Cavalcanti ; Casteletti, Luiz Carlos
Source: Materials Chemistry and Physics. Unidade: EESC
Subjects: FERRO FUNDIDO, DESGASTE ABRASIVO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RÊGO, Galtiere Corrêa et al. Effects of niobium and molybdenum addition on microstructural characteristics and wear properties of 14 wt%Cr white cast irons. Materials Chemistry and Physics, v. 317, p. 1-13, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.matchemphys.2024.129210. Acesso em: 18 nov. 2024.
APA
Rêgo, G. C., van Drunen, J., Matijevic, B., Canale, L. de C. F., Pinto, H. C., & Casteletti, L. C. (2024). Effects of niobium and molybdenum addition on microstructural characteristics and wear properties of 14 wt%Cr white cast irons. Materials Chemistry and Physics, 317, 1-13. doi:10.1016/j.matchemphys.2024.129210
NLM
Rêgo GC, van Drunen J, Matijevic B, Canale L de CF, Pinto HC, Casteletti LC. Effects of niobium and molybdenum addition on microstructural characteristics and wear properties of 14 wt%Cr white cast irons [Internet]. Materials Chemistry and Physics. 2024 ; 317 1-13.[citado 2024 nov. 18 ] Available from: http://dx.doi.org/10.1016/j.matchemphys.2024.129210
Vancouver
Rêgo GC, van Drunen J, Matijevic B, Canale L de CF, Pinto HC, Casteletti LC. Effects of niobium and molybdenum addition on microstructural characteristics and wear properties of 14 wt%Cr white cast irons [Internet]. Materials Chemistry and Physics. 2024 ; 317 1-13.[citado 2024 nov. 18 ] Available from: http://dx.doi.org/10.1016/j.matchemphys.2024.129210

USP Schools

ReP

Filtros

Document Types

USP Schools

Departament

Authors

USP affiliated authors

Date published

Subjects

Source title

Publisher

Conference titles

Countries/Territories

Grupo de pesquisa

Funding Agencies

Indexado em

Normalized affiliation

Non normalized affiliation

Countries of institutions of collaboration