Effect of carbon nanotubes reinforcement on the mechanical properties of alumina and ZTA composites for ballistic application (2018)
- Autores:
- Autor USP: RIBEIRO, SEBASTIAO - EEL
- Unidade: EEL
- DOI: 10.1590/0366-69132018643722475
- Assuntos: ALUMINA; ZIRCÔNIA; NANOTUBOS DE CARBONO; NANOCOMPOSITOS
- Palavras-chave do autor: alumina; zirconia; carbon nanotubes; nanocomposites
- Agências de fomento:
- Idioma: Inglês
- Resumo: Toughened and hardened alumina/carbon nanotubes and zirconia-toughened alumina (ZTA)/carbon nanotubes nanocomposites were developed by conventional ceramics route using pressureless sintering for the ballistic application. The multiwall carbon nanotubes (CNT) were functionalized with nitric acid oxidation reaction. Moreover, the surfactants sodium dodecyl sulphate and gum arabic were used to promote a homogeneous distribution of CNT in the ceramic matrix. Ceramic powders were prepared with pure alumina, alumina with the addition of 20 wt% of tetragonal zirconia/yttria, alumina/CNT and ZTA/CNT with the addition of 0.1 and 0.5 wt% of CNT. The morphology of nanocomposites was characterized by SEM-FEG. The mechanical properties of sintered samples were evaluated by flexural bending, Vickers microhardness and fracture toughness by SEVNB method. The addition of CNT in the ceramic and composite caused a general increase in densification, hardness, flexural strength and fracture toughness. ZTA composite with the addition of 0.1 wt% of CNT yielded the best results.
- Imprenta:
- Editora: ABCeram
- Local: São Paulo-SP
- Data de publicação: 2018
- Fonte:
- Este periódico é de acesso aberto
- Este artigo é de acesso aberto
- URL de acesso aberto
- Cor do Acesso Aberto: gold
- Licença: cc-by-nc
-
ABNT
COUTO, C. A. de O. e RIBEIRO, Sebastião e PASSADOR, F. R. Effect of carbon nanotubes reinforcement on the mechanical properties of alumina and ZTA composites for ballistic application. Cerâmica, v. 64, p. 608-615, 2018Tradução . . Disponível em: https://doi.org/10.1590/0366-69132018643722475. Acesso em: 16 jul. 2025. -
APA
Couto, C. A. de O., Ribeiro, S., & Passador, F. R. (2018). Effect of carbon nanotubes reinforcement on the mechanical properties of alumina and ZTA composites for ballistic application. Cerâmica, 64, 608-615. doi:10.1590/0366-69132018643722475 -
NLM
Couto CA de O, Ribeiro S, Passador FR. Effect of carbon nanotubes reinforcement on the mechanical properties of alumina and ZTA composites for ballistic application [Internet]. Cerâmica. 2018 ; 64 608-615.[citado 2025 jul. 16 ] Available from: https://doi.org/10.1590/0366-69132018643722475 -
Vancouver
Couto CA de O, Ribeiro S, Passador FR. Effect of carbon nanotubes reinforcement on the mechanical properties of alumina and ZTA composites for ballistic application [Internet]. Cerâmica. 2018 ; 64 608-615.[citado 2025 jul. 16 ] Available from: https://doi.org/10.1590/0366-69132018643722475 - PROPRIEDADES ÓPTICAS E MECÂNICAS DE ZrO2 ESTABILIZADA COM DIFERENTES TEORES DE Y2O3
- Influência da adição do pó da casca de ovo calcinada na resistência à compressão de argamassas 1:3
- Estudo do empacotamento do concreto civil com incorporação de cacos de vidro como agregado graúdo
- The wettability at high temperatures in the technological development of materials
- Effect of niobium addition in support catalysts applied in satellite propulsion
- Evaluation of mechanical properties of porous alumina ceramics obtained using rice husk as a porogenic agent
- Influência da distribuição granulométrica no tempo de secagem e na porosidade de uma cerâmica refratária monolítica
- Comparison of the indentation strength and single-edge-v-notched beam methods for dental ceramic fracture toughness testing
- Effect of temperature and heating rate on the sintering performance of SiC-Al 2 O 3 -Dy 2 O 3 and SiC-Al 2 O 3 -Yb 2 O 3 systems
- Efeito da temperatura de queima nos módulos de elasticidade e de ruptura de um concreto refratário
Informações sobre o DOI: 10.1590/0366-69132018643722475 (Fonte: oaDOI API)
Como citar
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
