Effect of the interrupted aging heat treatment T6I4 on the tensile properties and fatigue resistance of AA7050 alloy (2019)
- Autores:
- Autores USP: BAPTISTA, CARLOS ANTONIO REIS PEREIRA - EEL ; BARBOZA, MIGUEL JUSTINO RIBEIRO - EEL ; ANTUNES, ANA MARCIA BARBOSA DA SILVA - EEL
- Unidade: EEL
- DOI: 10.1007/s40430-019-1821-9
- Assuntos: ALUMÍNIO; FADIGA DOS MATERIAIS
- Agências de fomento:
- Idioma: Inglês
- Resumo: The tensile response and the fatigue behavior of age-hardenable aluminum alloys are strongly influenced by factors like the size, spacing and volume fraction of strengthening precipitates. Previous researches have shown that the interrupted aging (T6I4) could provide an improved combination of mechanical properties for some alloys. In this study, the tensile properties and high-cycle fatigue behavior of two tempers of AA7050 alloy (the commercial T7451 and the interrupted aging T6I4) were investigated. Transmission electron microscopy analyses of strengthening precipitates were performed, and the results showed that AA7050-T6I4 had a higher volume fraction of strengthening precipitates with smaller size. This microstructural feature was responsible by the higher ductility and toughness shown by T6I4 temper condition while maintaining yield stress and ultimate tensile strength similar to T7451. The smooth samples rotating bending fatigue curves of both material conditions were similar. Nevertheless, the interrupted aging leads to improved notched fatigue resistance and hence lower notch sensitivity. These results were related to the higher activity of screw dislocations and improved dislocation pinning effect during deformation promoted by T6I4 temper.
- Imprenta:
- Fonte:
- Título: Journal of the Brazilian Society of Mechanical Sciences and Engineering
- ISSN: 16785878
- Volume/Número/Paginação/Ano: v.41, n.319, p.1-13, 2019
- Status:
- Nenhuma versão em acesso aberto identificada
-
ABNT
ANTUNES, Ana Márcia Barbosa da Silva et al. Effect of the interrupted aging heat treatment T6I4 on the tensile properties and fatigue resistance of AA7050 alloy. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 41, n. 319, p. 1-13, 2019Tradução . . Disponível em: https://doi.org/10.1007/s40430-019-1821-9. Acesso em: 10 maio 2026. -
APA
Antunes, A. M. B. da S., Baptista, C. A. R. P., Barboza, M. J. R., Carvalho, A. L. M. de, & Mogili, N. V. V. (2019). Effect of the interrupted aging heat treatment T6I4 on the tensile properties and fatigue resistance of AA7050 alloy. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41( 319), 1-13. doi:10.1007/s40430-019-1821-9 -
NLM
Antunes AMB da S, Baptista CARP, Barboza MJR, Carvalho ALM de, Mogili NVV. Effect of the interrupted aging heat treatment T6I4 on the tensile properties and fatigue resistance of AA7050 alloy [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2019 ;41( 319): 1-13.[citado 2026 maio 10 ] Available from: https://doi.org/10.1007/s40430-019-1821-9 -
Vancouver
Antunes AMB da S, Baptista CARP, Barboza MJR, Carvalho ALM de, Mogili NVV. Effect of the interrupted aging heat treatment T6I4 on the tensile properties and fatigue resistance of AA7050 alloy [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2019 ;41( 319): 1-13.[citado 2026 maio 10 ] Available from: https://doi.org/10.1007/s40430-019-1821-9 - On the effect of interrupted ageing (T6I4) on the mechanical properties of AA6351 and AA7050 alloys.
- Gas nitriding influence on fatigue and creep behaviors in titanium grade 2
- Estudo do comportamento em fadiga de alto ciclo das ligas de alumínio AA6351 e AA7050 para aplicação aeronáutica
- Plasma immersion ion implantation (PIII) influence on Ti-6Al-4V alloy: Frequency effect
- Fatigue behavior of Ti-6Al-4V alloy modified by plasma immersion ion implantation: temperature effect.
- Creep and Mechanical Behavior Study of Inconel 718 Superalloy
- Study of the influence of the RRA thermal treatment and plasma nitriding on corrosion behavior of 7075-T6 aluminum alloy
- Fatigue crack growth behavior of laser-shock processed aluminum alloy 2024-T3
- Mechanical behavior of surface nitrided and heat-treated laser welded Ti-6Al-4V
- Investigation of residual stress, stress relaxation and work hardening effects induced by shot peening on the fatigue life of AA 6005-T6 aluminum alloy
Informações sobre a disponibilidade de versões do artigo em acesso aberto coletadas automaticamente via oaDOI API (Unpaywall).
Como citar
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
