ReP USP - Resultado da busca

Trabalho de evento
Parametric analysis of crushing and squeezing loads over a flexible pipe during installation procedure (2017)
Mendonça, Heloisa Guedes ; Martins, Clóvis de Arruda
Source: Proceedings. Conference titles: International Conference on Ocean, Offshore and Arctic Engineering. Unidade: EP
Subjects: TUBULAÇÕES, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MENDONÇA, Heloisa Guedes e MARTINS, Clóvis de Arruda. Parametric analysis of crushing and squeezing loads over a flexible pipe during installation procedure. 2017, Anais.. New York: ASME, 2017. Disponível em: https://doi.org/10.1115/OMAE2017-62167. Acesso em: 30 nov. 2025.
APA
Mendonça, H. G., & Martins, C. de A. (2017). Parametric analysis of crushing and squeezing loads over a flexible pipe during installation procedure. In Proceedings. New York: ASME. doi:10.1115/OMAE2017-62167
NLM
Mendonça HG, Martins C de A. Parametric analysis of crushing and squeezing loads over a flexible pipe during installation procedure [Internet]. Proceedings. 2017 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/OMAE2017-62167
Vancouver
Mendonça HG, Martins C de A. Parametric analysis of crushing and squeezing loads over a flexible pipe during installation procedure [Internet]. Proceedings. 2017 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/OMAE2017-62167
Trabalho de evento
Finite element analysis of umbilical cables anchoring systems (2017)
Malta, Eduardo Ribeiro ; Toni, Fernando Geremias ; Mendonça, Heloisa Guedes ; Martins, Clóvis de Arruda ; Morini, Rafael Giovane; Tanaka, Rafael Loureiro
Source: Proceedings. Conference titles: International Conference on Ocean, Offshore and Arctic Engineering. Unidade: EP
Subjects: MÉTODO DOS ELEMENTOS FINITOS, RESINAS EPOXI, TUBULAÇÕES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MALTA, Eduardo Ribeiro et al. Finite element analysis of umbilical cables anchoring systems. 2017, Anais.. New York: ASME, 2017. Disponível em: https://doi.org/10.1115/OMAE2017-62128. Acesso em: 30 nov. 2025.
APA
Malta, E. R., Toni, F. G., Mendonça, H. G., Martins, C. de A., Morini, R. G., & Tanaka, R. L. (2017). Finite element analysis of umbilical cables anchoring systems. In Proceedings. New York: ASME. doi:10.1115/OMAE2017-62128
NLM
Malta ER, Toni FG, Mendonça HG, Martins C de A, Morini RG, Tanaka RL. Finite element analysis of umbilical cables anchoring systems [Internet]. Proceedings. 2017 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/OMAE2017-62128
Vancouver
Malta ER, Toni FG, Mendonça HG, Martins C de A, Morini RG, Tanaka RL. Finite element analysis of umbilical cables anchoring systems [Internet]. Proceedings. 2017 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/OMAE2017-62128
Trabalho de evento
The influence of damping on the VIV suppression of a circular cylinder fitted with flexible shrouds (2017)
Cicolin, Murilo Marangon ; Assi, Gustavo Roque da Silva
Source: Proceedings. Conference titles: International Conference on Ocean, Offshore and Arctic Engineering. Unidade: EP
Assunto: ENGENHARIA NAVAL E OCEÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CICOLIN, Murilo Marangon e ASSI, Gustavo Roque da Silva. The influence of damping on the VIV suppression of a circular cylinder fitted with flexible shrouds. 2017, Anais.. New York: ASME, 2017. Disponível em: https://doi.org/10.1115/OMAE2017-61235. Acesso em: 30 nov. 2025.
APA
Cicolin, M. M., & Assi, G. R. da S. (2017). The influence of damping on the VIV suppression of a circular cylinder fitted with flexible shrouds. In Proceedings. New York: ASME. doi:10.1115/OMAE2017-61235
NLM
Cicolin MM, Assi GR da S. The influence of damping on the VIV suppression of a circular cylinder fitted with flexible shrouds [Internet]. Proceedings. 2017 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/OMAE2017-61235
Vancouver
Cicolin MM, Assi GR da S. The influence of damping on the VIV suppression of a circular cylinder fitted with flexible shrouds [Internet]. Proceedings. 2017 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/OMAE2017-61235
Trabalho de evento
Parallelized element-by-element architecture for structural analysis of flexible pipes using macro finite elements (2017)
Toni, Fernando Geremias ; Martins, Clóvis de Arruda
Source: Proceedings. Conference titles: International Conference on Ocean, Offshore and Arctic Engineering. Unidade: EP
Subjects: TUBULAÇÕES, MÉTODO DOS ELEMENTOS FINITOS, GÁS NATURAL, DESIGN
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TONI, Fernando Geremias e MARTINS, Clóvis de Arruda. Parallelized element-by-element architecture for structural analysis of flexible pipes using macro finite elements. 2017, Anais.. New York: ASME, 2017. Disponível em: https://doi.org/10.1115/OMAE2017-61800. Acesso em: 30 nov. 2025.
APA
Toni, F. G., & Martins, C. de A. (2017). Parallelized element-by-element architecture for structural analysis of flexible pipes using macro finite elements. In Proceedings. New York: ASME. doi:10.1115/OMAE2017-61800
NLM
Toni FG, Martins C de A. Parallelized element-by-element architecture for structural analysis of flexible pipes using macro finite elements [Internet]. Proceedings. 2017 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/OMAE2017-61800
Vancouver
Toni FG, Martins C de A. Parallelized element-by-element architecture for structural analysis of flexible pipes using macro finite elements [Internet]. Proceedings. 2017 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/OMAE2017-61800
Trabalho de evento
An integrated environment for design and analysis of umbilical cables (2017)
Provasi, Rodrigo ; Garcez, Leonardo Riccioppo ; Meirelles, Christiano Odir Cardoso; Martins, Clóvis de Arruda ; Barbosa, Andre Freitas; Otte Filho, Olaf Osvaldo
Source: Proceedings. Conference titles: International Conference on Ocean, Offshore and Arctic Engineering. Unidade: EP
Subjects: CAD, DESIGN, TUBULAÇÕES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PROVASI, Rodrigo et al. An integrated environment for design and analysis of umbilical cables. 2017, Anais.. New York: ASME, 2017. Disponível em: https://doi.org/10.1115/OMAE2017-61857. Acesso em: 30 nov. 2025.
APA
Provasi, R., Garcez, L. R., Meirelles, C. O. C., Martins, C. de A., Barbosa, A. F., & Otte Filho, O. O. (2017). An integrated environment for design and analysis of umbilical cables. In Proceedings. New York: ASME. doi:10.1115/OMAE2017-61857
NLM
Provasi R, Garcez LR, Meirelles COC, Martins C de A, Barbosa AF, Otte Filho OO. An integrated environment for design and analysis of umbilical cables [Internet]. Proceedings. 2017 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/OMAE2017-61857
Vancouver
Provasi R, Garcez LR, Meirelles COC, Martins C de A, Barbosa AF, Otte Filho OO. An integrated environment for design and analysis of umbilical cables [Internet]. Proceedings. 2017 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/OMAE2017-61857
Trabalho de evento
Equivalent model for interlocked carcass under axial loads (2016)
Provasi, Rodrigo ; Toni, Fernando Geremias ; Martins, Clóvis de Arruda
Source: Proceedings. Conference titles: International Conference on Ocean, Offshore and Arctic Engineering. Unidade: EP
Subjects: RESISTÊNCIA ESTRUTURAL, DESGASTE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PROVASI, Rodrigo e TONI, Fernando Geremias e MARTINS, Clóvis de Arruda. Equivalent model for interlocked carcass under axial loads. 2016, Anais.. New York: ASME, 2016. Disponível em: https://doi.org/10.1115/OMAE2016-54381. Acesso em: 30 nov. 2025.
APA
Provasi, R., Toni, F. G., & Martins, C. de A. (2016). Equivalent model for interlocked carcass under axial loads. In Proceedings. New York: ASME. doi:10.1115/OMAE2016-54381
NLM
Provasi R, Toni FG, Martins C de A. Equivalent model for interlocked carcass under axial loads [Internet]. Proceedings. 2016 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/OMAE2016-54381
Vancouver
Provasi R, Toni FG, Martins C de A. Equivalent model for interlocked carcass under axial loads [Internet]. Proceedings. 2016 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/OMAE2016-54381
Trabalho de evento
Parametric analysis on the crushing resistance of flexible pipes under installation loads (2016)
Mendonça, Heloisa Guedes ; Martins, Clóvis de Arruda
Source: Proceedings. Conference titles: International Conference on Ocean, Offshore and Arctic Engineering. Unidade: EP
Subjects: DESGASTE, TUBULAÇÕES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MENDONÇA, Heloisa Guedes e MARTINS, Clóvis de Arruda. Parametric analysis on the crushing resistance of flexible pipes under installation loads. 2016, Anais.. New York: ASME, 2016. Disponível em: https://doi.org/10.1115/OMAE2016-54453. Acesso em: 30 nov. 2025.
APA
Mendonça, H. G., & Martins, C. de A. (2016). Parametric analysis on the crushing resistance of flexible pipes under installation loads. In Proceedings. New York: ASME. doi:10.1115/OMAE2016-54453
NLM
Mendonça HG, Martins C de A. Parametric analysis on the crushing resistance of flexible pipes under installation loads [Internet]. Proceedings. 2016 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/OMAE2016-54453
Vancouver
Mendonça HG, Martins C de A. Parametric analysis on the crushing resistance of flexible pipes under installation loads [Internet]. Proceedings. 2016 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/OMAE2016-54453
Trabalho de evento
A state-of-the-art review on pool boiling on nanostructure surfaces (2015)
Ignácio, Isabela; Cardoso, Elaine Maria ; Gasche, Jose Luiz; Ribatski, Gherhardt
Source: Proceedings. Conference titles: International Conference of Nanochannels, Microchannels and Minichannels - ICNMM. Unidade: EESC
Subjects: TRANSFERÊNCIA DE CALOR, ESCOAMENTO BIFÁSICO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
IGNÁCIO, Isabela et al. A state-of-the-art review on pool boiling on nanostructure surfaces. 2015, Anais.. New York, NY, USA: ASME, 2015. Disponível em: https://repositorio.usp.br/directbitstream/2dd401a0-df7d-4de0-abf5-4df4c39186af/PROD_25713_SYSNO_3125572_removed.pdf. Acesso em: 30 nov. 2025.
APA
Ignácio, I., Cardoso, E. M., Gasche, J. L., & Ribatski, G. (2015). A state-of-the-art review on pool boiling on nanostructure surfaces. In Proceedings. New York, NY, USA: ASME. Recuperado de https://repositorio.usp.br/directbitstream/2dd401a0-df7d-4de0-abf5-4df4c39186af/PROD_25713_SYSNO_3125572_removed.pdf
NLM
Ignácio I, Cardoso EM, Gasche JL, Ribatski G. A state-of-the-art review on pool boiling on nanostructure surfaces [Internet]. Proceedings. 2015 ;[citado 2025 nov. 30 ] Available from: https://repositorio.usp.br/directbitstream/2dd401a0-df7d-4de0-abf5-4df4c39186af/PROD_25713_SYSNO_3125572_removed.pdf
Vancouver
Ignácio I, Cardoso EM, Gasche JL, Ribatski G. A state-of-the-art review on pool boiling on nanostructure surfaces [Internet]. Proceedings. 2015 ;[citado 2025 nov. 30 ] Available from: https://repositorio.usp.br/directbitstream/2dd401a0-df7d-4de0-abf5-4df4c39186af/PROD_25713_SYSNO_3125572_removed.pdf
Trabalho de evento
The influence of kinematic redundancies in the energy efficiency of planar parallel manipulators (2015)
Gómez Ruiz, Andrés; Fontes, João Vitor de Carvalho ; Silva, Maíra Martins da
Source: Proceedings. Conference titles: International Mechanical Engineering Congress and Exposition - IMECE. Unidade: EESC
Subjects: CINEMÁTICA, THE INFLUENCE OF KINEMATIC REDUNDANCIES IN THE ENERGY EFFICIENCY OF PLANAR PARALLEL MANIPULATORS, MANIPULADORES, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GÓMEZ RUIZ, Andrés e FONTES, João Vitor de Carvalho e SILVA, Maíra Martins da. The influence of kinematic redundancies in the energy efficiency of planar parallel manipulators. 2015, Anais.. New York, NY, USA: ASME, 2015. Disponível em: https://repositorio.usp.br/directbitstream/e299e59f-2292-4ea4-9edc-4495ed3c12a3/OK___trabalho%2028%20-%20The%20Influence%20of%20Kinematic%20Redundancies%20in%20the%20Energy%20Efficiency%20of%20Planar%20Parallel%20Manipulators.%20%28ASME%202015%20International%20Mechanical..%29.pdf. Acesso em: 30 nov. 2025.
APA
Gómez Ruiz, A., Fontes, J. V. de C., & Silva, M. M. da. (2015). The influence of kinematic redundancies in the energy efficiency of planar parallel manipulators. In Proceedings. New York, NY, USA: ASME. Recuperado de https://repositorio.usp.br/directbitstream/e299e59f-2292-4ea4-9edc-4495ed3c12a3/OK___trabalho%2028%20-%20The%20Influence%20of%20Kinematic%20Redundancies%20in%20the%20Energy%20Efficiency%20of%20Planar%20Parallel%20Manipulators.%20%28ASME%202015%20International%20Mechanical..%29.pdf
NLM
Gómez Ruiz A, Fontes JV de C, Silva MM da. The influence of kinematic redundancies in the energy efficiency of planar parallel manipulators [Internet]. Proceedings. 2015 ;[citado 2025 nov. 30 ] Available from: https://repositorio.usp.br/directbitstream/e299e59f-2292-4ea4-9edc-4495ed3c12a3/OK___trabalho%2028%20-%20The%20Influence%20of%20Kinematic%20Redundancies%20in%20the%20Energy%20Efficiency%20of%20Planar%20Parallel%20Manipulators.%20%28ASME%202015%20International%20Mechanical..%29.pdf
Vancouver
Gómez Ruiz A, Fontes JV de C, Silva MM da. The influence of kinematic redundancies in the energy efficiency of planar parallel manipulators [Internet]. Proceedings. 2015 ;[citado 2025 nov. 30 ] Available from: https://repositorio.usp.br/directbitstream/e299e59f-2292-4ea4-9edc-4495ed3c12a3/OK___trabalho%2028%20-%20The%20Influence%20of%20Kinematic%20Redundancies%20in%20the%20Energy%20Efficiency%20of%20Planar%20Parallel%20Manipulators.%20%28ASME%202015%20International%20Mechanical..%29.pdf
Trabalho de evento
Flow boiling heat transfer coefficient of DI-Water/SiO2(15 nm and 80 nm) nanofluids inside microchannels (2015)
Moreira, Tiago Augusto; Nascimento, Francisco Júlio do; Ribatski, Gherhardt
Source: Proceedings. Conference titles: International Conference of Nanochannels, Microchannels and Minichannels - ICNMM. Unidade: EESC
Subjects: CONDUTIVIDADE TÉRMICA, ESCOAMENTO BIFÁSICO, TRANSFERÊNCIA DE CALOR, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOREIRA, Tiago Augusto e NASCIMENTO, Francisco Júlio do e RIBATSKI, Gherhardt. Flow boiling heat transfer coefficient of DI-Water/SiO2(15 nm and 80 nm) nanofluids inside microchannels. 2015, Anais.. New York, NY, USA: ASME, 2015. Disponível em: https://repositorio.usp.br/directbitstream/eba575ef-f60e-494d-ada8-b5bda44f7945/PROD_25711_SYSNO_3125535%20%281%29_removed.pdf. Acesso em: 30 nov. 2025.
APA
Moreira, T. A., Nascimento, F. J. do, & Ribatski, G. (2015). Flow boiling heat transfer coefficient of DI-Water/SiO2(15 nm and 80 nm) nanofluids inside microchannels. In Proceedings. New York, NY, USA: ASME. Recuperado de https://repositorio.usp.br/directbitstream/eba575ef-f60e-494d-ada8-b5bda44f7945/PROD_25711_SYSNO_3125535%20%281%29_removed.pdf
NLM
Moreira TA, Nascimento FJ do, Ribatski G. Flow boiling heat transfer coefficient of DI-Water/SiO2(15 nm and 80 nm) nanofluids inside microchannels [Internet]. Proceedings. 2015 ;[citado 2025 nov. 30 ] Available from: https://repositorio.usp.br/directbitstream/eba575ef-f60e-494d-ada8-b5bda44f7945/PROD_25711_SYSNO_3125535%20%281%29_removed.pdf
Vancouver
Moreira TA, Nascimento FJ do, Ribatski G. Flow boiling heat transfer coefficient of DI-Water/SiO2(15 nm and 80 nm) nanofluids inside microchannels [Internet]. Proceedings. 2015 ;[citado 2025 nov. 30 ] Available from: https://repositorio.usp.br/directbitstream/eba575ef-f60e-494d-ada8-b5bda44f7945/PROD_25711_SYSNO_3125535%20%281%29_removed.pdf
Trabalho de evento
Finite element analysis of flexible pipes under compression (2014)
Malta, Eduardo Ribeiro ; Martins, Clóvis de Arruda
Source: Proceedings. Conference titles: International Conference on Ocean, Offshore and Arctic Engineering. Unidade: EP
Subjects: MÉTODO DOS ELEMENTOS FINITOS, TUBULAÇÕES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MALTA, Eduardo Ribeiro e MARTINS, Clóvis de Arruda. Finite element analysis of flexible pipes under compression. 2014, Anais.. Nantes: ASME, 2014. Disponível em: https://doi.org/10.1115/OMAE2014-23192. Acesso em: 30 nov. 2025.
APA
Malta, E. R., & Martins, C. de A. (2014). Finite element analysis of flexible pipes under compression. In Proceedings. Nantes: ASME. doi:10.1115/OMAE2014-23192
NLM
Malta ER, Martins C de A. Finite element analysis of flexible pipes under compression [Internet]. Proceedings. 2014 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/OMAE2014-23192
Vancouver
Malta ER, Martins C de A. Finite element analysis of flexible pipes under compression [Internet]. Proceedings. 2014 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/OMAE2014-23192
Trabalho de evento
Model-based compensation for burst message loss in wireless networked control systems: experimental results (2014)
Godoy, Eduardo Paciência; Scorzoni, Fernando; Colón, Diego ; Porto, Arthur José Vieira
Source: Proceedings. Conference titles: ASME 2013 Dynamic Systems and Control Conference. Unidade: EESC
Subjects: SISTEMAS DE CONTROLE, WIRELESS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GODOY, Eduardo Paciência et al. Model-based compensation for burst message loss in wireless networked control systems: experimental results. 2014, Anais.. [S.l.]: ASME, 2014. Disponível em: https://doi.org/10.1115/DSCC2013-3940. Acesso em: 30 nov. 2025.
APA
Godoy, E. P., Scorzoni, F., Colón, D., & Porto, A. J. V. (2014). Model-based compensation for burst message loss in wireless networked control systems: experimental results. In Proceedings (Vol. 2). ASME. doi:10.1115/DSCC2013-3940
NLM
Godoy EP, Scorzoni F, Colón D, Porto AJV. Model-based compensation for burst message loss in wireless networked control systems: experimental results [Internet]. Proceedings. 2014 ; 2[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/DSCC2013-3940
Vancouver
Godoy EP, Scorzoni F, Colón D, Porto AJV. Model-based compensation for burst message loss in wireless networked control systems: experimental results [Internet]. Proceedings. 2014 ; 2[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/DSCC2013-3940
Trabalho de evento
Soil-structure interaction analysis (2013)
Ramos, Ana Paula Ferreira; Paiva, João Batista de
Source: Proceedings. Conference titles: Pan-American Congress of Applied Mechanics - PACAM. Unidade: EESC
Subjects: INTERAÇÃO SOLO-ESTRUTURA, MÉTODO DOS ELEMENTOS FINITOS, MÉTODO DOS ELEMENTOS DE CONTORNO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RAMOS, Ana Paula Ferreira e PAIVA, João Batista de. Soil-structure interaction analysis. 2013, Anais.. Houston: ASME, 2013. . Acesso em: 30 nov. 2025.
APA
Ramos, A. P. F., & Paiva, J. B. de. (2013). Soil-structure interaction analysis. In Proceedings. Houston: ASME.
NLM
Ramos APF, Paiva JB de. Soil-structure interaction analysis. Proceedings. 2013 ;[citado 2025 nov. 30 ]
Vancouver
Ramos APF, Paiva JB de. Soil-structure interaction analysis. Proceedings. 2013 ;[citado 2025 nov. 30 ]
Trabalho de evento
Finite element modeling of flexible pipes under crushing loads (2013)
Malta, Eduardo Ribeiro ; Martins, Clóvis de Arruda ; Gonçalves, Silas Henrique; Gay Neto, Alfredo
Source: Proceedings. Conference titles: International Conference on Ocean, Offshore and Arctic Engineering. Unidade: EP
Subjects: MÉTODO DOS ELEMENTOS FINITOS, TUBOS FLEXÍVEIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MALTA, Eduardo Ribeiro et al. Finite element modeling of flexible pipes under crushing loads. 2013, Anais.. Nantes: ASME, 2013. Disponível em: https://doi.org/10.1115/OMAE2013-10307. Acesso em: 30 nov. 2025.
APA
Malta, E. R., Martins, C. de A., Gonçalves, S. H., & Gay Neto, A. (2013). Finite element modeling of flexible pipes under crushing loads. In Proceedings. Nantes: ASME. doi:10.1115/OMAE2013-10307
NLM
Malta ER, Martins C de A, Gonçalves SH, Gay Neto A. Finite element modeling of flexible pipes under crushing loads [Internet]. Proceedings. 2013 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/OMAE2013-10307
Vancouver
Malta ER, Martins C de A, Gonçalves SH, Gay Neto A. Finite element modeling of flexible pipes under crushing loads [Internet]. Proceedings. 2013 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/OMAE2013-10307
Trabalho de evento
Experimental investigation on the stability of parallel and oblique plates as suppressors of vortex-induced vibration (2013)
Assi, Gustavo Roque da Silva ; Franco, Guilherme Schmalz
Source: Proceedings. Conference titles: International Conference on Ocean, Offshore and Arctic Engineering. Unidade: EP
Assunto: PLACAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ASSI, Gustavo Roque da Silva e FRANCO, Guilherme Schmalz. Experimental investigation on the stability of parallel and oblique plates as suppressors of vortex-induced vibration. 2013, Anais.. Nantes: ASME, 2013. Disponível em: https://doi.org/10.1115/OMAE2013-10144. Acesso em: 30 nov. 2025.
APA
Assi, G. R. da S., & Franco, G. S. (2013). Experimental investigation on the stability of parallel and oblique plates as suppressors of vortex-induced vibration. In Proceedings. Nantes: ASME. doi:10.1115/OMAE2013-10144
NLM
Assi GR da S, Franco GS. Experimental investigation on the stability of parallel and oblique plates as suppressors of vortex-induced vibration [Internet]. Proceedings. 2013 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/OMAE2013-10144
Vancouver
Assi GR da S, Franco GS. Experimental investigation on the stability of parallel and oblique plates as suppressors of vortex-induced vibration [Internet]. Proceedings. 2013 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/OMAE2013-10144
Trabalho de evento
Loop formation in catenary risers on installation condition: a comparison of statics and dynamics (2013)
Malta, Eduardo Ribeiro ; Pimenta, Paulo de Mattos ; Martins, Clóvis de Arruda
Source: Proceedings. Conference titles: International Conference on Ocean, Offshore and Arctic Engineering. Unidade: EP
Subjects: DINÂMICA, TUBULAÇÕES, ENGENHARIA NAVAL E OCEÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MALTA, Eduardo Ribeiro e PIMENTA, Paulo de Mattos e MARTINS, Clóvis de Arruda. Loop formation in catenary risers on installation condition: a comparison of statics and dynamics. 2013, Anais.. Nantes: ASME, 2013. Disponível em: https://doi.org/10.1115/OMAE2013-11426. Acesso em: 30 nov. 2025.
APA
Malta, E. R., Pimenta, P. de M., & Martins, C. de A. (2013). Loop formation in catenary risers on installation condition: a comparison of statics and dynamics. In Proceedings. Nantes: ASME. doi:10.1115/OMAE2013-11426
NLM
Malta ER, Pimenta P de M, Martins C de A. Loop formation in catenary risers on installation condition: a comparison of statics and dynamics [Internet]. Proceedings. 2013 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/OMAE2013-11426
Vancouver
Malta ER, Pimenta P de M, Martins C de A. Loop formation in catenary risers on installation condition: a comparison of statics and dynamics [Internet]. Proceedings. 2013 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/OMAE2013-11426
Trabalho de evento
Crush behavior of multilayered pipes: study of pipe integrity and kinematic assumptions (2013)
Gay Neto, Alfredo ; Franzini, Guilherme Rosa ; Martins, Clóvis de Arruda ; Pesce, Celso Pupo ; Malta, Eduardo Ribeiro
Source: Proceedings. Conference titles: International Conference on Ocean, Offshore and Arctic Engineering. Unidade: EP
Subjects: MÉTODO DOS ELEMENTOS FINITOS, TUBULAÇÕES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GAY NETO, Alfredo et al. Crush behavior of multilayered pipes: study of pipe integrity and kinematic assumptions. 2013, Anais.. Nantes: ASME, 2013. Disponível em: https://doi.org/10.1115/OMAE2013-10263. Acesso em: 30 nov. 2025.
APA
Gay Neto, A., Franzini, G. R., Martins, C. de A., Pesce, C. P., & Malta, E. R. (2013). Crush behavior of multilayered pipes: study of pipe integrity and kinematic assumptions. In Proceedings. Nantes: ASME. doi:10.1115/OMAE2013-10263
NLM
Gay Neto A, Franzini GR, Martins C de A, Pesce CP, Malta ER. Crush behavior of multilayered pipes: study of pipe integrity and kinematic assumptions [Internet]. Proceedings. 2013 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/OMAE2013-10263
Vancouver
Gay Neto A, Franzini GR, Martins C de A, Pesce CP, Malta ER. Crush behavior of multilayered pipes: study of pipe integrity and kinematic assumptions [Internet]. Proceedings. 2013 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/OMAE2013-10263
Trabalho de evento
Investigation of bifurcation solutions of plane problems for a class of hyperelastic laminates (2013)
Aguiar, Adair Roberto ; Prado, Edmar Borges Theóphilo; Pérez-Fernández, Leslie Darien
Source: Proceedings. Conference titles: Pan-American Congress of Applied Mechanics - PACAM. Unidade: EESC
Subjects: LAMINADOS, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AGUIAR, Adair Roberto e PRADO, Edmar Borges Theóphilo e PÉREZ-FERNÁNDEZ, Leslie Darien. Investigation of bifurcation solutions of plane problems for a class of hyperelastic laminates. 2013, Anais.. Houston: ASME, 2013. . Acesso em: 30 nov. 2025.
APA
Aguiar, A. R., Prado, E. B. T., & Pérez-Fernández, L. D. (2013). Investigation of bifurcation solutions of plane problems for a class of hyperelastic laminates. In Proceedings. Houston: ASME.
NLM
Aguiar AR, Prado EBT, Pérez-Fernández LD. Investigation of bifurcation solutions of plane problems for a class of hyperelastic laminates. Proceedings. 2013 ;[citado 2025 nov. 30 ]
Vancouver
Aguiar AR, Prado EBT, Pérez-Fernández LD. Investigation of bifurcation solutions of plane problems for a class of hyperelastic laminates. Proceedings. 2013 ;[citado 2025 nov. 30 ]
Trabalho de evento
Study of 7050-T7451 aluminum alloy elastic-plastic behavior and the determination of its constitutive properties using FEM (2013)
Lima, Rodrigo Mendes; Massaroppi Júnior, Ernesto ; Bose Filho, Waldek Wladimir
Source: Proceedings. Conference titles: Pan American Congress of Applied Mechanics - PACAM. Unidade: EESC
Subjects: LIGAS LEVES, ALUMÍNIO, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LIMA, Rodrigo Mendes e MASSAROPPI JÚNIOR, Ernesto e BOSE FILHO, Waldek Wladimir. Study of 7050-T7451 aluminum alloy elastic-plastic behavior and the determination of its constitutive properties using FEM. 2013, Anais.. Houston: ASME, 2013. . Acesso em: 30 nov. 2025.
APA
Lima, R. M., Massaroppi Júnior, E., & Bose Filho, W. W. (2013). Study of 7050-T7451 aluminum alloy elastic-plastic behavior and the determination of its constitutive properties using FEM. In Proceedings. Houston: ASME.
NLM
Lima RM, Massaroppi Júnior E, Bose Filho WW. Study of 7050-T7451 aluminum alloy elastic-plastic behavior and the determination of its constitutive properties using FEM. Proceedings. 2013 ;[citado 2025 nov. 30 ]
Vancouver
Lima RM, Massaroppi Júnior E, Bose Filho WW. Study of 7050-T7451 aluminum alloy elastic-plastic behavior and the determination of its constitutive properties using FEM. Proceedings. 2013 ;[citado 2025 nov. 30 ]
Trabalho de evento
Design analysis of a micro gas turbine combustion chamber burning natural gas (2012)
Campos, André Perpignan Viviani de; Sacomano Filho, Fernando Luiz ; Krieger Filho, Guenther Carlos
Source: Proceedings. Conference titles: ASME Turbo Expo Turbine Technical Conference and Exposition. Unidade: EP
Subjects: TURBINAS A GÁS, DINÂMICA DOS FLUÍDOS COMPUTACIONAL, GERAÇÃO DE ENERGIA ELÉTRICA, COMBUSTÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAMPOS, André Perpignan Viviani de e SACOMANO FILHO, Fernando Luiz e KRIEGER FILHO, Guenther Carlos. Design analysis of a micro gas turbine combustion chamber burning natural gas. 2012, Anais.. New York: ASME, 2012. Disponível em: https://doi.org/10.1115/GT2012-69180. Acesso em: 30 nov. 2025.
APA
Campos, A. P. V. de, Sacomano Filho, F. L., & Krieger Filho, G. C. (2012). Design analysis of a micro gas turbine combustion chamber burning natural gas. In Proceedings. New York: ASME. doi:10.1115/GT2012-69180
NLM
Campos APV de, Sacomano Filho FL, Krieger Filho GC. Design analysis of a micro gas turbine combustion chamber burning natural gas [Internet]. Proceedings. 2012 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/GT2012-69180
Vancouver
Campos APV de, Sacomano Filho FL, Krieger Filho GC. Design analysis of a micro gas turbine combustion chamber burning natural gas [Internet]. Proceedings. 2012 ;[citado 2025 nov. 30 ] Available from: https://doi.org/10.1115/GT2012-69180

USP Schools

ReP

Filtros

Departament

Authors

USP affiliated authors

Date published

Subjects

Conference titles

Funding Agencies

Non normalized affiliation