ReP USP - Resultado da busca

Artigo de periodico
Correction to:: Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition (2025)
Momeni, Seyedali; Coelho, Reginaldo Teixeira ; Bruno, Danver Messias; Jasinevicius, Renato Goulart
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: MANUFATURA ADITIVA, RUGOSIDADE SUPERFICIAL, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOMENI, Seyedali et al. Correction to:: Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition. International Journal of Advanced Manufacturing Technology, v. 137, p. 6241-6242, 2025Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-025-15452-8. Acesso em: 27 nov. 2025.
APA
Momeni, S., Coelho, R. T., Bruno, D. M., & Jasinevicius, R. G. (2025). Correction to:: Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition. International Journal of Advanced Manufacturing Technology, 137, 6241-6242. doi:10.1007/s00170-025-15452-8
NLM
Momeni S, Coelho RT, Bruno DM, Jasinevicius RG. Correction to:: Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition [Internet]. International Journal of Advanced Manufacturing Technology. 2025 ; 137 6241-6242.[citado 2025 nov. 27 ] Available from: http://dx.doi.org/10.1007/s00170-025-15452-8
Vancouver
Momeni S, Coelho RT, Bruno DM, Jasinevicius RG. Correction to:: Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition [Internet]. International Journal of Advanced Manufacturing Technology. 2025 ; 137 6241-6242.[citado 2025 nov. 27 ] Available from: http://dx.doi.org/10.1007/s00170-025-15452-8
Artigo de periodico
Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition (2025)
Momeni, Seyedali; Coelho, Reginaldo Teixeira ; Bruno, Danver Messias; Jasinevicius, Renato Goulart
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: MANUFATURA ADITIVA, RUGOSIDADE SUPERFICIAL, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOMENI, Seyedali et al. Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition. International Journal of Advanced Manufacturing Technology, v. 137, p. 2491-2517, 2025Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-025-15308-1. Acesso em: 27 nov. 2025.
APA
Momeni, S., Coelho, R. T., Bruno, D. M., & Jasinevicius, R. G. (2025). Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition. International Journal of Advanced Manufacturing Technology, 137, 2491-2517. doi:10.1007/s00170-025-15308-1
NLM
Momeni S, Coelho RT, Bruno DM, Jasinevicius RG. Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition [Internet]. International Journal of Advanced Manufacturing Technology. 2025 ; 137 2491-2517.[citado 2025 nov. 27 ] Available from: http://dx.doi.org/10.1007/s00170-025-15308-1
Vancouver
Momeni S, Coelho RT, Bruno DM, Jasinevicius RG. Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition [Internet]. International Journal of Advanced Manufacturing Technology. 2025 ; 137 2491-2517.[citado 2025 nov. 27 ] Available from: http://dx.doi.org/10.1007/s00170-025-15308-1
Artigo de periodico
Hot embossing of aspherical Fresnel microlenses: design, process, and characterization (2021)
Colafemina, João Paulo; Dib, Marcel Henrique Militão; Jasinevicius, Renato Goulart
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: ENGENHARIA MECÂNICA, TORNEAMENTO, POLÍMEROS (MATERIAIS)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COLAFEMINA, João Paulo e DIB, Marcel Henrique Militão e JASINEVICIUS, Renato Goulart. Hot embossing of aspherical Fresnel microlenses: design, process, and characterization. International Journal of Advanced Manufacturing Technology, p. 1-19, 2021Tradução . . Disponível em: https://doi.org/10.1007/s00170-021-06637-y. Acesso em: 27 nov. 2025.
APA
Colafemina, J. P., Dib, M. H. M., & Jasinevicius, R. G. (2021). Hot embossing of aspherical Fresnel microlenses: design, process, and characterization. International Journal of Advanced Manufacturing Technology, 1-19. doi:10.1007/s00170-021-06637-y
NLM
Colafemina JP, Dib MHM, Jasinevicius RG. Hot embossing of aspherical Fresnel microlenses: design, process, and characterization [Internet]. International Journal of Advanced Manufacturing Technology. 2021 ; 1-19.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s00170-021-06637-y
Vancouver
Colafemina JP, Dib MHM, Jasinevicius RG. Hot embossing of aspherical Fresnel microlenses: design, process, and characterization [Internet]. International Journal of Advanced Manufacturing Technology. 2021 ; 1-19.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s00170-021-06637-y
Artigo de periodico
Assessment of replication fidelity of optical microstructures by hot embossing (2017)
Cirino, Giuseppe Antonio; Granado, Renê Mendes; Mohammed-Brahim, Tayeb; Jasinevicius, Renato Goulart
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Assunto: DIAMANTE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CIRINO, Giuseppe Antonio et al. Assessment of replication fidelity of optical microstructures by hot embossing. International Journal of Advanced Manufacturing Technology, v. 88, n. Ja 2017, p. 303-316, 2017Tradução . . Disponível em: https://doi.org/10.1007/s00170-016-8757-3. Acesso em: 27 nov. 2025.
APA
Cirino, G. A., Granado, R. M., Mohammed-Brahim, T., & Jasinevicius, R. G. (2017). Assessment of replication fidelity of optical microstructures by hot embossing. International Journal of Advanced Manufacturing Technology, 88( Ja 2017), 303-316. doi:10.1007/s00170-016-8757-3
NLM
Cirino GA, Granado RM, Mohammed-Brahim T, Jasinevicius RG. Assessment of replication fidelity of optical microstructures by hot embossing [Internet]. International Journal of Advanced Manufacturing Technology. 2017 ; 88( Ja 2017): 303-316.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s00170-016-8757-3
Vancouver
Cirino GA, Granado RM, Mohammed-Brahim T, Jasinevicius RG. Assessment of replication fidelity of optical microstructures by hot embossing [Internet]. International Journal of Advanced Manufacturing Technology. 2017 ; 88( Ja 2017): 303-316.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s00170-016-8757-3
Artigo de periodico
Precision dicing of hard materials with abrasive blade (2016)
Araújo, L. A. O.; Foschini, C. R.; Jasinevicius, Renato Goulart ; Fortulan, Carlos Alberto
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: CORTE, FERRAMENTAS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ARAÚJO, L. A. O. et al. Precision dicing of hard materials with abrasive blade. International Journal of Advanced Manufacturing Technology, v. 86, n. 9-12, p. 2885-2894, 2016Tradução . . Disponível em: https://doi.org/10.1007/s00170-016-8394-x. Acesso em: 27 nov. 2025.
APA
Araújo, L. A. O., Foschini, C. R., Jasinevicius, R. G., & Fortulan, C. A. (2016). Precision dicing of hard materials with abrasive blade. International Journal of Advanced Manufacturing Technology, 86( 9-12), 2885-2894. doi:10.1007/s00170-016-8394-x
NLM
Araújo LAO, Foschini CR, Jasinevicius RG, Fortulan CA. Precision dicing of hard materials with abrasive blade [Internet]. International Journal of Advanced Manufacturing Technology. 2016 ; 86( 9-12): 2885-2894.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s00170-016-8394-x
Vancouver
Araújo LAO, Foschini CR, Jasinevicius RG, Fortulan CA. Precision dicing of hard materials with abrasive blade [Internet]. International Journal of Advanced Manufacturing Technology. 2016 ; 86( 9-12): 2885-2894.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s00170-016-8394-x
Artigo de periodico
Micro end-milling of channels using ultrafine-grained low-carbon steel (2015)
Assis, Cleiton Lazaro Fazolo de; Jasinevicius, Renato Goulart ; Rodrigues, Alessandro Roger
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: USINAGEM, AÇO BAIXO CARBONO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ASSIS, Cleiton Lazaro Fazolo de e JASINEVICIUS, Renato Goulart e RODRIGUES, Alessandro Roger. Micro end-milling of channels using ultrafine-grained low-carbon steel. International Journal of Advanced Manufacturing Technology, v. 77, n. 5, p. 1155-1165, 2015Tradução . . Disponível em: https://doi.org/10.1007/s00170-014-6503-2. Acesso em: 27 nov. 2025.
APA
Assis, C. L. F. de, Jasinevicius, R. G., & Rodrigues, A. R. (2015). Micro end-milling of channels using ultrafine-grained low-carbon steel. International Journal of Advanced Manufacturing Technology, 77( 5), 1155-1165. doi:10.1007/s00170-014-6503-2
NLM
Assis CLF de, Jasinevicius RG, Rodrigues AR. Micro end-milling of channels using ultrafine-grained low-carbon steel [Internet]. International Journal of Advanced Manufacturing Technology. 2015 ; 77( 5): 1155-1165.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s00170-014-6503-2
Vancouver
Assis CLF de, Jasinevicius RG, Rodrigues AR. Micro end-milling of channels using ultrafine-grained low-carbon steel [Internet]. International Journal of Advanced Manufacturing Technology. 2015 ; 77( 5): 1155-1165.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s00170-014-6503-2
Artigo de periodico
Ultraprecision machining of diffraction optical elements on soft semiconductor crystal (2015)
Jasinevicius, Renato Goulart ; Pizani, Paulo Sérgio; Cirino, Giuseppe Antonio
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: USINAGEM, MUDANÇA DE FASE, DIAMANTE (FERRAMENTAS)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart e PIZANI, Paulo Sérgio e CIRINO, Giuseppe Antonio. Ultraprecision machining of diffraction optical elements on soft semiconductor crystal. International Journal of Advanced Manufacturing Technology, v. 77, n. 5, p. 1145-1154, 2015Tradução . . Disponível em: https://doi.org/10.1007/s00170-014-6449-4. Acesso em: 27 nov. 2025.
APA
Jasinevicius, R. G., Pizani, P. S., & Cirino, G. A. (2015). Ultraprecision machining of diffraction optical elements on soft semiconductor crystal. International Journal of Advanced Manufacturing Technology, 77( 5), 1145-1154. doi:10.1007/s00170-014-6449-4
NLM
Jasinevicius RG, Pizani PS, Cirino GA. Ultraprecision machining of diffraction optical elements on soft semiconductor crystal [Internet]. International Journal of Advanced Manufacturing Technology. 2015 ; 77( 5): 1145-1154.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s00170-014-6449-4
Vancouver
Jasinevicius RG, Pizani PS, Cirino GA. Ultraprecision machining of diffraction optical elements on soft semiconductor crystal [Internet]. International Journal of Advanced Manufacturing Technology. 2015 ; 77( 5): 1145-1154.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s00170-014-6449-4
Artigo de periodico
Annealing treatment of amorphous silicon generated by single point diamond turning (2007)
Jasinevicius, Renato Goulart ; Pizani, Paulo Sérgio
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: SILICONE, DIAMANTE, RECOZIMENTO, ESPECTROSCOPIA RAMAN
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart e PIZANI, Paulo Sérgio. Annealing treatment of amorphous silicon generated by single point diamond turning. International Journal of Advanced Manufacturing Technology, v. 34, n. 7-8, p. 680-688, 2007Tradução . . Disponível em: https://doi.org/10.1007/s00170-006-0650-z. Acesso em: 27 nov. 2025.
APA
Jasinevicius, R. G., & Pizani, P. S. (2007). Annealing treatment of amorphous silicon generated by single point diamond turning. International Journal of Advanced Manufacturing Technology, 34( 7-8), 680-688. doi:10.1007/s00170-006-0650-z
NLM
Jasinevicius RG, Pizani PS. Annealing treatment of amorphous silicon generated by single point diamond turning [Internet]. International Journal of Advanced Manufacturing Technology. 2007 ; 34( 7-8): 680-688.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s00170-006-0650-z
Vancouver
Jasinevicius RG, Pizani PS. Annealing treatment of amorphous silicon generated by single point diamond turning [Internet]. International Journal of Advanced Manufacturing Technology. 2007 ; 34( 7-8): 680-688.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s00170-006-0650-z

USP Schools

ReP

Filtros

Authors

USP affiliated authors

Date published

Subjects

Indexado em

Non normalized affiliation