ReP USP - Resultado da busca

Artigo de periodico
Deposition of stellite superalloy powder onto 7475 aluminium alloy to enhance wear resistance (2007)
Casteletti, Luiz Carlos; Lombardi Neto, Amadeu; Totten, George Edward; Macedo, Diogo Teixeira de; Cruvinel, Lucas de Brito
Source: Aluminium International Today. Unidade: EESC
Assunto: DESGASTE ABRASIVO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CASTELETTI, Luiz Carlos et al. Deposition of stellite superalloy powder onto 7475 aluminium alloy to enhance wear resistance. Aluminium International Today, v. No/Dec. 2007, n. 6, p. 29-31, 2007Tradução . . Acesso em: 28 set. 2024.
APA
Casteletti, L. C., Lombardi Neto, A., Totten, G. E., Macedo, D. T. de, & Cruvinel, L. de B. (2007). Deposition of stellite superalloy powder onto 7475 aluminium alloy to enhance wear resistance. Aluminium International Today, No/Dec. 2007( 6), 29-31.
NLM
Casteletti LC, Lombardi Neto A, Totten GE, Macedo DT de, Cruvinel L de B. Deposition of stellite superalloy powder onto 7475 aluminium alloy to enhance wear resistance. Aluminium International Today. 2007 ; No/Dec. 2007( 6): 29-31.[citado 2024 set. 28 ]
Vancouver
Casteletti LC, Lombardi Neto A, Totten GE, Macedo DT de, Cruvinel L de B. Deposition of stellite superalloy powder onto 7475 aluminium alloy to enhance wear resistance. Aluminium International Today. 2007 ; No/Dec. 2007( 6): 29-31.[citado 2024 set. 28 ]
Artigo de periodico
Overview of factors contributing to steel spring performance and failure (2007)
Canale, Lauralice de Campos Franceschini; Penha, Renata Neves; Totten, George Edward; Canale, Antonio Carlos; Gasparini, Maria Regina
Source: International Journal of Microstructure and Materials Properties. Unidade: EESC
Subjects: TRATAMENTO TÉRMICO, TENSÃO RESIDUAL, FADIGA DOS MATERIAIS, IMPERFEIÇÕES E FALHAS DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CANALE, Lauralice de Campos Franceschini et al. Overview of factors contributing to steel spring performance and failure. International Journal of Microstructure and Materials Properties, v. 2, n. 3/4, p. 262-309, 2007Tradução . . Disponível em: https://doi.org/10.1504/ijmmp.2007.015310. Acesso em: 28 set. 2024.
APA
Canale, L. de C. F., Penha, R. N., Totten, G. E., Canale, A. C., & Gasparini, M. R. (2007). Overview of factors contributing to steel spring performance and failure. International Journal of Microstructure and Materials Properties, 2( 3/4), 262-309. doi:10.1504/ijmmp.2007.015310
NLM
Canale L de CF, Penha RN, Totten GE, Canale AC, Gasparini MR. Overview of factors contributing to steel spring performance and failure [Internet]. International Journal of Microstructure and Materials Properties. 2007 ; 2( 3/4): 262-309.[citado 2024 set. 28 ] Available from: https://doi.org/10.1504/ijmmp.2007.015310
Vancouver
Canale L de CF, Penha RN, Totten GE, Canale AC, Gasparini MR. Overview of factors contributing to steel spring performance and failure [Internet]. International Journal of Microstructure and Materials Properties. 2007 ; 2( 3/4): 262-309.[citado 2024 set. 28 ] Available from: https://doi.org/10.1504/ijmmp.2007.015310
Artigo de periodico
Micromechanisms of cleavage fracture initiation from inclusions in ferritic welds part II: quantification of local fracture behaviour observed in fatigue pre-cracked testpieces (2007)
Bose Filho, Waldek Wladimir; Carvalho, André Luis Moreira de; Bowen, P.
Source: Materials Science and Engineering A. Unidade: EESC
Subjects: MECÂNICA DA FRATURA, FADIGA DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BOSE FILHO, Waldek Wladimir e CARVALHO, André Luis Moreira de e BOWEN, P. Micromechanisms of cleavage fracture initiation from inclusions in ferritic welds part II: quantification of local fracture behaviour observed in fatigue pre-cracked testpieces. Materials Science and Engineering A, v. 452-453, p. 401-410, 2007Tradução . . Disponível em: http://www.sciencedirect.com/science?_ob=MImg&_imagekey=B6TXD-4MJC21W-3-K&_cdi=5588&_user=5674931&_orig=browse&_coverDate=04%2F15%2F2007&_sk=995479999&view=c&wchp=dGLzVlz-zSkWb&md5=9cb7b8988507b90b604736764d7c6539&ie=/sdarticle.pdf. Acesso em: 28 set. 2024.
APA
Bose Filho, W. W., Carvalho, A. L. M. de, & Bowen, P. (2007). Micromechanisms of cleavage fracture initiation from inclusions in ferritic welds part II: quantification of local fracture behaviour observed in fatigue pre-cracked testpieces. Materials Science and Engineering A, 452-453, 401-410. Recuperado de http://www.sciencedirect.com/science?_ob=MImg&_imagekey=B6TXD-4MJC21W-3-K&_cdi=5588&_user=5674931&_orig=browse&_coverDate=04%2F15%2F2007&_sk=995479999&view=c&wchp=dGLzVlz-zSkWb&md5=9cb7b8988507b90b604736764d7c6539&ie=/sdarticle.pdf
NLM
Bose Filho WW, Carvalho ALM de, Bowen P. Micromechanisms of cleavage fracture initiation from inclusions in ferritic welds part II: quantification of local fracture behaviour observed in fatigue pre-cracked testpieces [Internet]. Materials Science and Engineering A. 2007 ; 452-453 401-410.[citado 2024 set. 28 ] Available from: http://www.sciencedirect.com/science?_ob=MImg&_imagekey=B6TXD-4MJC21W-3-K&_cdi=5588&_user=5674931&_orig=browse&_coverDate=04%2F15%2F2007&_sk=995479999&view=c&wchp=dGLzVlz-zSkWb&md5=9cb7b8988507b90b604736764d7c6539&ie=/sdarticle.pdf
Vancouver
Bose Filho WW, Carvalho ALM de, Bowen P. Micromechanisms of cleavage fracture initiation from inclusions in ferritic welds part II: quantification of local fracture behaviour observed in fatigue pre-cracked testpieces [Internet]. Materials Science and Engineering A. 2007 ; 452-453 401-410.[citado 2024 set. 28 ] Available from: http://www.sciencedirect.com/science?_ob=MImg&_imagekey=B6TXD-4MJC21W-3-K&_cdi=5588&_user=5674931&_orig=browse&_coverDate=04%2F15%2F2007&_sk=995479999&view=c&wchp=dGLzVlz-zSkWb&md5=9cb7b8988507b90b604736764d7c6539&ie=/sdarticle.pdf
Artigo de periodico
Intensive quenching part 1: what is it? (2007)
Canale, Lauralice de Campos Franceschini; Kobasko, Nikolai I.; Totten, George Edward
Source: International Heat Treatment and Surface Engineering. Unidade: EESC
Subjects: TRATAMENTO TÉRMICO, TENSÃO RESIDUAL, TÊMPERA (ENGENHARIA)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CANALE, Lauralice de Campos Franceschini e KOBASKO, Nikolai I. e TOTTEN, George Edward. Intensive quenching part 1: what is it?. International Heat Treatment and Surface Engineering, v. 1, n. 1, p. 30-33, 2007Tradução . . Acesso em: 28 set. 2024.
APA
Canale, L. de C. F., Kobasko, N. I., & Totten, G. E. (2007). Intensive quenching part 1: what is it? International Heat Treatment and Surface Engineering, 1( 1), 30-33.
NLM
Canale L de CF, Kobasko NI, Totten GE. Intensive quenching part 1: what is it? International Heat Treatment and Surface Engineering. 2007 ; 1( 1): 30-33.[citado 2024 set. 28 ]
Vancouver
Canale L de CF, Kobasko NI, Totten GE. Intensive quenching part 1: what is it? International Heat Treatment and Surface Engineering. 2007 ; 1( 1): 30-33.[citado 2024 set. 28 ]
Trabalho de evento
Some aspects of metal cutting and machine remote control applied on micromachining processes (2007)
Coelho, Reginaldo Teixeira; Oliveira, João Fernando Gomes de; Casteletti, Luiz Carlos; Arai, Ricardo; Torrisi, Nunzio Marco
Source: Proceedings. Conference titles: Machine Tool Technologies Research Foundation 2007 Meeting. Unidade: EESC
Assunto: USINAGEM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COELHO, Reginaldo Teixeira et al. Some aspects of metal cutting and machine remote control applied on micromachining processes. 2007, Anais.. Nagano: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2007. . Acesso em: 28 set. 2024.
APA
Coelho, R. T., Oliveira, J. F. G. de, Casteletti, L. C., Arai, R., & Torrisi, N. M. (2007). Some aspects of metal cutting and machine remote control applied on micromachining processes. In Proceedings. Nagano: Escola de Engenharia de São Carlos, Universidade de São Paulo.
NLM
Coelho RT, Oliveira JFG de, Casteletti LC, Arai R, Torrisi NM. Some aspects of metal cutting and machine remote control applied on micromachining processes. Proceedings. 2007 ;[citado 2024 set. 28 ]
Vancouver
Coelho RT, Oliveira JFG de, Casteletti LC, Arai R, Torrisi NM. Some aspects of metal cutting and machine remote control applied on micromachining processes. Proceedings. 2007 ;[citado 2024 set. 28 ]
Trabalho de evento
Thermal spray coatings on an aged 7475 aluminum alloy substrate (2007)
Macedo, Diogo Teixeira de; Cruvinel, Lucas de Brito; Lombardi Neto, Amadeu; Totten, George Edward; Casteletti, Luiz Carlos
Source: Proceedings. Conference titles: ASM Heat Treating Society Conference and Exposition. Unidade: EESC
Subjects: REVESTIMENTO DE SUPERFÍCIES, DESGASTE ABRASIVO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MACEDO, Diogo Teixeira de et al. Thermal spray coatings on an aged 7475 aluminum alloy substrate. 2007, Anais.. Detroit: ASM International, 2007. . Acesso em: 28 set. 2024.
APA
Macedo, D. T. de, Cruvinel, L. de B., Lombardi Neto, A., Totten, G. E., & Casteletti, L. C. (2007). Thermal spray coatings on an aged 7475 aluminum alloy substrate. In Proceedings. Detroit: ASM International.
NLM
Macedo DT de, Cruvinel L de B, Lombardi Neto A, Totten GE, Casteletti LC. Thermal spray coatings on an aged 7475 aluminum alloy substrate. Proceedings. 2007 ;[citado 2024 set. 28 ]
Vancouver
Macedo DT de, Cruvinel L de B, Lombardi Neto A, Totten GE, Casteletti LC. Thermal spray coatings on an aged 7475 aluminum alloy substrate. Proceedings. 2007 ;[citado 2024 set. 28 ]
Artigo de periodico
Intensive quenching: improved hardness and residual stress (2007)
Kobasko, Nikolai I.; Totten, George Edward; Canale, Lauralice de Campos Franceschini
Source: Heat Treatment of Metals. Unidade: EESC
Subjects: TENSÃO RESIDUAL, TÊMPERA (ENGENHARIA)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
KOBASKO, Nikolai I. e TOTTEN, George Edward e CANALE, Lauralice de Campos Franceschini. Intensive quenching: improved hardness and residual stress. Heat Treatment of Metals, v. 32, n. 5, p. 84-89, 2007Tradução . . Acesso em: 28 set. 2024.
APA
Kobasko, N. I., Totten, G. E., & Canale, L. de C. F. (2007). Intensive quenching: improved hardness and residual stress. Heat Treatment of Metals, 32( 5), 84-89.
NLM
Kobasko NI, Totten GE, Canale L de CF. Intensive quenching: improved hardness and residual stress. Heat Treatment of Metals. 2007 ; 32( 5): 84-89.[citado 2024 set. 28 ]
Vancouver
Kobasko NI, Totten GE, Canale L de CF. Intensive quenching: improved hardness and residual stress. Heat Treatment of Metals. 2007 ; 32( 5): 84-89.[citado 2024 set. 28 ]
Trabalho de evento
Three point bending behavior of orthodontic thermo-active nitinol wires (2007)
Itman Filho, André; Gouvêa, Carlos Alberto Rodrigues; Lombardi Neto, Amadeu; Totten, George Edward; Casteletti, Luiz Carlos
Source: Proceedings. Conference titles: ASM Heat Treating Society Conference and Exposition. Unidade: EESC
Subjects: LIGAS DENTÁRIAS, TRATAMENTO ORTODÔNTICO, TITÂNIO, NÍQUEL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ITMAN FILHO, André et al. Three point bending behavior of orthodontic thermo-active nitinol wires. 2007, Anais.. Detroit: ASM International, 2007. . Acesso em: 28 set. 2024.
APA
Itman Filho, A., Gouvêa, C. A. R., Lombardi Neto, A., Totten, G. E., & Casteletti, L. C. (2007). Three point bending behavior of orthodontic thermo-active nitinol wires. In Proceedings. Detroit: ASM International.
NLM
Itman Filho A, Gouvêa CAR, Lombardi Neto A, Totten GE, Casteletti LC. Three point bending behavior of orthodontic thermo-active nitinol wires. Proceedings. 2007 ;[citado 2024 set. 28 ]
Vancouver
Itman Filho A, Gouvêa CAR, Lombardi Neto A, Totten GE, Casteletti LC. Three point bending behavior of orthodontic thermo-active nitinol wires. Proceedings. 2007 ;[citado 2024 set. 28 ]
Trabalho de evento
Electric resistivity evaluation of the 'FE'-31'MN'-7.5'AL'-1-5'SI'-1.0'C' alloy (2007)
Casteletti, Luiz Carlos; Lombardi Neto, Amadeu; Totten, George Edward
Source: Proceedings. Conference titles: ASM Heat Treating Society Conference and Exposition. Unidade: EESC
Subjects: OXIDAÇÃO, AÇO INOXIDÁVEL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CASTELETTI, Luiz Carlos e LOMBARDI NETO, Amadeu e TOTTEN, George Edward. Electric resistivity evaluation of the 'FE'-31'MN'-7.5'AL'-1-5'SI'-1.0'C' alloy. 2007, Anais.. Detroit: ASM International, 2007. . Acesso em: 28 set. 2024.
APA
Casteletti, L. C., Lombardi Neto, A., & Totten, G. E. (2007). Electric resistivity evaluation of the 'FE'-31'MN'-7.5'AL'-1-5'SI'-1.0'C' alloy. In Proceedings. Detroit: ASM International.
NLM
Casteletti LC, Lombardi Neto A, Totten GE. Electric resistivity evaluation of the 'FE'-31'MN'-7.5'AL'-1-5'SI'-1.0'C' alloy. Proceedings. 2007 ;[citado 2024 set. 28 ]
Vancouver
Casteletti LC, Lombardi Neto A, Totten GE. Electric resistivity evaluation of the 'FE'-31'MN'-7.5'AL'-1-5'SI'-1.0'C' alloy. Proceedings. 2007 ;[citado 2024 set. 28 ]
Artigo de periodico
Intensive quenching part 2: formation of optimal surface compressive stresses (2007)
Canale, Lauralice de Campos Franceschini; Kobasko, Nikolai I.; Totten, George Edward
Source: International Heat Treatment and Surface Engineering. Unidade: EESC
Subjects: TRATAMENTO TÉRMICO, TENSÃO RESIDUAL, TÊMPERA (ENGENHARIA)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CANALE, Lauralice de Campos Franceschini e KOBASKO, Nikolai I. e TOTTEN, George Edward. Intensive quenching part 2: formation of optimal surface compressive stresses. International Heat Treatment and Surface Engineering, v. 1, n. 2, p. 60-63, 2007Tradução . . Acesso em: 28 set. 2024.
APA
Canale, L. de C. F., Kobasko, N. I., & Totten, G. E. (2007). Intensive quenching part 2: formation of optimal surface compressive stresses. International Heat Treatment and Surface Engineering, 1( 2), 60-63.
NLM
Canale L de CF, Kobasko NI, Totten GE. Intensive quenching part 2: formation of optimal surface compressive stresses. International Heat Treatment and Surface Engineering. 2007 ; 1( 2): 60-63.[citado 2024 set. 28 ]
Vancouver
Canale L de CF, Kobasko NI, Totten GE. Intensive quenching part 2: formation of optimal surface compressive stresses. International Heat Treatment and Surface Engineering. 2007 ; 1( 2): 60-63.[citado 2024 set. 28 ]
Trabalho de evento
Developing and implementing an open and non-proprietary device description for fieldbus devices based on software standards (2007)
Pantoni, Rodrigo Palucci; Passarini, Luís Carlos; Brandão, Dennis
Conference titles: IEEE International Symposium on Industrial Electronics - ISIE. Unidade: EESC
Subjects: XML, DISPOSITIVOS ELETRÔNICOS, AUTOMAÇÃO INDUSTRIAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PANTONI, Rodrigo Palucci e PASSARINI, Luís Carlos e BRANDÃO, Dennis. Developing and implementing an open and non-proprietary device description for fieldbus devices based on software standards. 2007, Anais.. Piscataway: IEEE, 2007. Disponível em: https://doi.org/10.1109/ISIE.2007.4374895. Acesso em: 28 set. 2024.
APA
Pantoni, R. P., Passarini, L. C., & Brandão, D. (2007). Developing and implementing an open and non-proprietary device description for fieldbus devices based on software standards. In . Piscataway: IEEE. doi:10.1109/ISIE.2007.4374895
NLM
Pantoni RP, Passarini LC, Brandão D. Developing and implementing an open and non-proprietary device description for fieldbus devices based on software standards [Internet]. 2007 ;[citado 2024 set. 28 ] Available from: https://doi.org/10.1109/ISIE.2007.4374895
Vancouver
Pantoni RP, Passarini LC, Brandão D. Developing and implementing an open and non-proprietary device description for fieldbus devices based on software standards [Internet]. 2007 ;[citado 2024 set. 28 ] Available from: https://doi.org/10.1109/ISIE.2007.4374895
Artigo de periodico
Effect of stress relief at 350 and 550 Celsius degrees on the impact properties of duplex stainless steels (2007)
Martins, Marcelo; Rossitti, Sergio Mazzer; Ritoni, Marcio; Casteletti, Luiz Carlos
Source: Materials Characterization. Unidade: EESC
Subjects: FRACTOGRAFIA, AÇO INOXIDÁVEL DUPLEX
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTINS, Marcelo et al. Effect of stress relief at 350 and 550 Celsius degrees on the impact properties of duplex stainless steels. Materials Characterization, v. 58, n. 10, p. 909-916, 2007Tradução . . Disponível em: http://www.sciencedirect.com/science?_ob=MImg&_imagekey=B6TXJ-4MBBYW1-1-1&_cdi=5592&_user=5674931&_orig=browse&_coverDate=10%2F31%2F2007&_sk=999419989&view=c&wchp=dGLbVlb-zSkWb&md5=42e712f14f0d85f96993abe93f4ed30f&ie=/sdarticle.pdf. Acesso em: 28 set. 2024.
APA
Martins, M., Rossitti, S. M., Ritoni, M., & Casteletti, L. C. (2007). Effect of stress relief at 350 and 550 Celsius degrees on the impact properties of duplex stainless steels. Materials Characterization, 58( 10), 909-916. Recuperado de http://www.sciencedirect.com/science?_ob=MImg&_imagekey=B6TXJ-4MBBYW1-1-1&_cdi=5592&_user=5674931&_orig=browse&_coverDate=10%2F31%2F2007&_sk=999419989&view=c&wchp=dGLbVlb-zSkWb&md5=42e712f14f0d85f96993abe93f4ed30f&ie=/sdarticle.pdf
NLM
Martins M, Rossitti SM, Ritoni M, Casteletti LC. Effect of stress relief at 350 and 550 Celsius degrees on the impact properties of duplex stainless steels [Internet]. Materials Characterization. 2007 ; 58( 10): 909-916.[citado 2024 set. 28 ] Available from: http://www.sciencedirect.com/science?_ob=MImg&_imagekey=B6TXJ-4MBBYW1-1-1&_cdi=5592&_user=5674931&_orig=browse&_coverDate=10%2F31%2F2007&_sk=999419989&view=c&wchp=dGLbVlb-zSkWb&md5=42e712f14f0d85f96993abe93f4ed30f&ie=/sdarticle.pdf
Vancouver
Martins M, Rossitti SM, Ritoni M, Casteletti LC. Effect of stress relief at 350 and 550 Celsius degrees on the impact properties of duplex stainless steels [Internet]. Materials Characterization. 2007 ; 58( 10): 909-916.[citado 2024 set. 28 ] Available from: http://www.sciencedirect.com/science?_ob=MImg&_imagekey=B6TXJ-4MBBYW1-1-1&_cdi=5592&_user=5674931&_orig=browse&_coverDate=10%2F31%2F2007&_sk=999419989&view=c&wchp=dGLbVlb-zSkWb&md5=42e712f14f0d85f96993abe93f4ed30f&ie=/sdarticle.pdf
Artigo de periodico
Development of rolling mill for rectangular orthodontic wires production (2007)
Totten, George Edward; Itman Filho, André; Gouvêa, Carlos Alberto Rodrigues; Lombardi Neto, Amadeu; Casteletti, Luiz Carlos
Source: Journal of Achievements in Materials and Manufacturing Engineering. Unidade: EESC
Subjects: LAMINAÇÃO, TRAÇÃO ORTODÔNTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TOTTEN, George Edward et al. Development of rolling mill for rectangular orthodontic wires production. Journal of Achievements in Materials and Manufacturing Engineering, v. 24, n. 1, p. Se 2007, 2007Tradução . . Acesso em: 28 set. 2024.
APA
Totten, G. E., Itman Filho, A., Gouvêa, C. A. R., Lombardi Neto, A., & Casteletti, L. C. (2007). Development of rolling mill for rectangular orthodontic wires production. Journal of Achievements in Materials and Manufacturing Engineering, 24( 1), Se 2007.
NLM
Totten GE, Itman Filho A, Gouvêa CAR, Lombardi Neto A, Casteletti LC. Development of rolling mill for rectangular orthodontic wires production. Journal of Achievements in Materials and Manufacturing Engineering. 2007 ; 24( 1): Se 2007.[citado 2024 set. 28 ]
Vancouver
Totten GE, Itman Filho A, Gouvêa CAR, Lombardi Neto A, Casteletti LC. Development of rolling mill for rectangular orthodontic wires production. Journal of Achievements in Materials and Manufacturing Engineering. 2007 ; 24( 1): Se 2007.[citado 2024 set. 28 ]
Artigo de periodico
Toughness and bending resistance of nitrided tool steels (2007)
Vatavuk, Jan; Canale, Lauralice de Campos Franceschini; Cardoso, Sérgio G.; Totten, George Edward
Source: Rechuli - Heat Treatment. Unidade: EESC
Subjects: TRATAMENTO TÉRMICO, AÇO FERRAMENTA, TENACIDADE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
VATAVUK, Jan et al. Toughness and bending resistance of nitrided tool steels. Rechuli - Heat Treatment, v. 22, n. 3, p. 10-16, 2007Tradução . . Acesso em: 28 set. 2024.
APA
Vatavuk, J., Canale, L. de C. F., Cardoso, S. G., & Totten, G. E. (2007). Toughness and bending resistance of nitrided tool steels. Rechuli - Heat Treatment, 22( 3), 10-16.
NLM
Vatavuk J, Canale L de CF, Cardoso SG, Totten GE. Toughness and bending resistance of nitrided tool steels. Rechuli - Heat Treatment. 2007 ; 22( 3): 10-16.[citado 2024 set. 28 ]
Vancouver
Vatavuk J, Canale L de CF, Cardoso SG, Totten GE. Toughness and bending resistance of nitrided tool steels. Rechuli - Heat Treatment. 2007 ; 22( 3): 10-16.[citado 2024 set. 28 ]
Trabalho de evento
Effect of HVOF deposition process in powders of tungsten carbide with different binders (2007)
Arnoni, Eduardo Augusto Brefere; Lombardi Neto, Amadeu; Nucci, Rafael; Totten, George Edward; Casteletti, Luiz Carlos
Source: Proceedings. Conference titles: International Conference on Powder Metallurgy and Particulate Materials. Unidade: EESC
Assunto: DESGASTE ABRASIVO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ARNONI, Eduardo Augusto Brefere et al. Effect of HVOF deposition process in powders of tungsten carbide with different binders. 2007, Anais.. Princeton: MPIF/APMI International, 2007. . Acesso em: 28 set. 2024.
APA
Arnoni, E. A. B., Lombardi Neto, A., Nucci, R., Totten, G. E., & Casteletti, L. C. (2007). Effect of HVOF deposition process in powders of tungsten carbide with different binders. In Proceedings. Princeton: MPIF/APMI International.
NLM
Arnoni EAB, Lombardi Neto A, Nucci R, Totten GE, Casteletti LC. Effect of HVOF deposition process in powders of tungsten carbide with different binders. Proceedings. 2007 ;[citado 2024 set. 28 ]
Vancouver
Arnoni EAB, Lombardi Neto A, Nucci R, Totten GE, Casteletti LC. Effect of HVOF deposition process in powders of tungsten carbide with different binders. Proceedings. 2007 ;[citado 2024 set. 28 ]
Artigo de periodico
Micromechanisms of cleavage fracture initiation from inclusions in ferritic welds part I: quantification of local fracture behaviour observed in notched testpieces (2007)
Bose Filho, Waldek Wladimir; Carvalho, André Luis Moreira de; Bowen, P.
Source: Materials Science and Engineering A. Unidade: EESC
Subjects: MECÂNICA DA FRATURA, SOLDAGEM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BOSE FILHO, Waldek Wladimir e CARVALHO, André Luis Moreira de e BOWEN, P. Micromechanisms of cleavage fracture initiation from inclusions in ferritic welds part I: quantification of local fracture behaviour observed in notched testpieces. Materials Science and Engineering A, v. 460-461, p. 436-452, 2007Tradução . . Disponível em: http://www.sciencedirect.com/science?_ob=MImg&_imagekey=B6TXD-4N02J5R-7-Y&_cdi=5588&_user=5674931&_orig=browse&_coverDate=07%2F15%2F2007&_sk=995399999&view=c&wchp=dGLbVlz-zSkWz&md5=05ae584bef1e3cd2377e795bb3251ef6&ie=/sdarticle.pdf. Acesso em: 28 set. 2024.
APA
Bose Filho, W. W., Carvalho, A. L. M. de, & Bowen, P. (2007). Micromechanisms of cleavage fracture initiation from inclusions in ferritic welds part I: quantification of local fracture behaviour observed in notched testpieces. Materials Science and Engineering A, 460-461, 436-452. Recuperado de http://www.sciencedirect.com/science?_ob=MImg&_imagekey=B6TXD-4N02J5R-7-Y&_cdi=5588&_user=5674931&_orig=browse&_coverDate=07%2F15%2F2007&_sk=995399999&view=c&wchp=dGLbVlz-zSkWz&md5=05ae584bef1e3cd2377e795bb3251ef6&ie=/sdarticle.pdf
NLM
Bose Filho WW, Carvalho ALM de, Bowen P. Micromechanisms of cleavage fracture initiation from inclusions in ferritic welds part I: quantification of local fracture behaviour observed in notched testpieces [Internet]. Materials Science and Engineering A. 2007 ; 460-461 436-452.[citado 2024 set. 28 ] Available from: http://www.sciencedirect.com/science?_ob=MImg&_imagekey=B6TXD-4N02J5R-7-Y&_cdi=5588&_user=5674931&_orig=browse&_coverDate=07%2F15%2F2007&_sk=995399999&view=c&wchp=dGLbVlz-zSkWz&md5=05ae584bef1e3cd2377e795bb3251ef6&ie=/sdarticle.pdf
Vancouver
Bose Filho WW, Carvalho ALM de, Bowen P. Micromechanisms of cleavage fracture initiation from inclusions in ferritic welds part I: quantification of local fracture behaviour observed in notched testpieces [Internet]. Materials Science and Engineering A. 2007 ; 460-461 436-452.[citado 2024 set. 28 ] Available from: http://www.sciencedirect.com/science?_ob=MImg&_imagekey=B6TXD-4N02J5R-7-Y&_cdi=5588&_user=5674931&_orig=browse&_coverDate=07%2F15%2F2007&_sk=995399999&view=c&wchp=dGLbVlz-zSkWz&md5=05ae584bef1e3cd2377e795bb3251ef6&ie=/sdarticle.pdf
Artigo de periodico
Thixocasting of an A356 alloy: tensile strength, porosity and fatigue behaviour (2007)
Ferrante, Maurízio; Vieira, E. A.; Freitas, Emerson Reginaldo de; Ruckert, Cassius Olívio Figueiredo Terra; Bose Filho, Waldek Wladimir
Source: Metallurgical Science and Technology. Unidade: EESC
Subjects: FADIGA DOS MATERIAIS, TENSÃO DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERRANTE, Maurízio et al. Thixocasting of an A356 alloy: tensile strength, porosity and fatigue behaviour. Metallurgical Science and Technology, v. 25, n. 2, p. 3-10, 2007Tradução . . Acesso em: 28 set. 2024.
APA
Ferrante, M., Vieira, E. A., Freitas, E. R. de, Ruckert, C. O. F. T., & Bose Filho, W. W. (2007). Thixocasting of an A356 alloy: tensile strength, porosity and fatigue behaviour. Metallurgical Science and Technology, 25( 2), 3-10.
NLM
Ferrante M, Vieira EA, Freitas ER de, Ruckert COFT, Bose Filho WW. Thixocasting of an A356 alloy: tensile strength, porosity and fatigue behaviour. Metallurgical Science and Technology. 2007 ; 25( 2): 3-10.[citado 2024 set. 28 ]
Vancouver
Ferrante M, Vieira EA, Freitas ER de, Ruckert COFT, Bose Filho WW. Thixocasting of an A356 alloy: tensile strength, porosity and fatigue behaviour. Metallurgical Science and Technology. 2007 ; 25( 2): 3-10.[citado 2024 set. 28 ]
Artigo de periodico
Titanium and molybdenum content in supermartensitic stainless steel (2007)
Rodrigues, César Augusto Duarte; Di Lorenzo, Pedro Luiz; Sokolowski, Alexandre; Barbosa, Celso Antonio; Rollo, João Manuel Domingos de Almeida
Source: Materials Science and Engineering A. Unidade: EESC
Subjects: TITÂNIO, TRATAMENTO TÉRMICO (PROPRIEDADES MECÂNICAS), AÇO INOXIDÁVEL MARTENSÍTICO, MUDANÇA DE FASE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RODRIGUES, César Augusto Duarte et al. Titanium and molybdenum content in supermartensitic stainless steel. Materials Science and Engineering A, v. 460-461, p. 149-152, 2007Tradução . . Disponível em: https://doi.org/10.1016/j.msea.2007.01.016. Acesso em: 28 set. 2024.
APA
Rodrigues, C. A. D., Di Lorenzo, P. L., Sokolowski, A., Barbosa, C. A., & Rollo, J. M. D. de A. (2007). Titanium and molybdenum content in supermartensitic stainless steel. Materials Science and Engineering A, 460-461, 149-152. doi:10.1016/j.msea.2007.01.016
NLM
Rodrigues CAD, Di Lorenzo PL, Sokolowski A, Barbosa CA, Rollo JMD de A. Titanium and molybdenum content in supermartensitic stainless steel [Internet]. Materials Science and Engineering A. 2007 ; 460-461 149-152.[citado 2024 set. 28 ] Available from: https://doi.org/10.1016/j.msea.2007.01.016
Vancouver
Rodrigues CAD, Di Lorenzo PL, Sokolowski A, Barbosa CA, Rollo JMD de A. Titanium and molybdenum content in supermartensitic stainless steel [Internet]. Materials Science and Engineering A. 2007 ; 460-461 149-152.[citado 2024 set. 28 ] Available from: https://doi.org/10.1016/j.msea.2007.01.016
Artigo de periodico
Energy savings using a combination of carburizing cycle reduction and intesive quenching (2007)
Canale, Lauralice de Campos Franceschini; Merheb, Eduardo Wingeter; Vendramim, João Carmo; Totten, George Edward
Source: Rechuli - Heat Treatment. Unidade: EESC
Subjects: TÊMPERA (ENGENHARIA), TRATAMENTO TÉRMICO, TENSÃO DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CANALE, Lauralice de Campos Franceschini et al. Energy savings using a combination of carburizing cycle reduction and intesive quenching. Rechuli - Heat Treatment, v. 22, n. 2, p. 55-59, 2007Tradução . . Acesso em: 28 set. 2024.
APA
Canale, L. de C. F., Merheb, E. W., Vendramim, J. C., & Totten, G. E. (2007). Energy savings using a combination of carburizing cycle reduction and intesive quenching. Rechuli - Heat Treatment, 22( 2), 55-59.
NLM
Canale L de CF, Merheb EW, Vendramim JC, Totten GE. Energy savings using a combination of carburizing cycle reduction and intesive quenching. Rechuli - Heat Treatment. 2007 ; 22( 2): 55-59.[citado 2024 set. 28 ]
Vancouver
Canale L de CF, Merheb EW, Vendramim JC, Totten GE. Energy savings using a combination of carburizing cycle reduction and intesive quenching. Rechuli - Heat Treatment. 2007 ; 22( 2): 55-59.[citado 2024 set. 28 ]
Trabalho de evento
George E. Totten, Ph.D, FASM: a biographical overview of his life and a brief overview of his impact on global quenching technology (2007)
Canale, Lauralice de Campos Franceschini; Canale, Antonio Carlos
Source: Proceedings. Conference titles: ASM Heat Treating Society Conference and Exposition. Unidade: EESC
Subjects: TRATAMENTO TÉRMICO, BIOGRAFIAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CANALE, Lauralice de Campos Franceschini e CANALE, Antonio Carlos. George E. Totten, Ph.D, FASM: a biographical overview of his life and a brief overview of his impact on global quenching technology. 2007, Anais.. Detroit: ASM International, 2007. . Acesso em: 28 set. 2024.
APA
Canale, L. de C. F., & Canale, A. C. (2007). George E. Totten, Ph.D, FASM: a biographical overview of his life and a brief overview of his impact on global quenching technology. In Proceedings. Detroit: ASM International.
NLM
Canale L de CF, Canale AC. George E. Totten, Ph.D, FASM: a biographical overview of his life and a brief overview of his impact on global quenching technology. Proceedings. 2007 ;[citado 2024 set. 28 ]
Vancouver
Canale L de CF, Canale AC. George E. Totten, Ph.D, FASM: a biographical overview of his life and a brief overview of his impact on global quenching technology. Proceedings. 2007 ;[citado 2024 set. 28 ]

USP Schools

ReP

Filtros

Authors

USP affiliated authors

Subjects

Source title

Publisher

Conference titles

Countries/Territories

Indexado em

Non normalized affiliation