A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CATALANO, Fernando Martini. Aerodinâmica aplicada: túneis de vento e a diminuição do arrasto. 2003. Tese (Livre Docência) – Universidade de São Paulo, São Carlos, 2003. . Acesso em: 28 set. 2024.
APA
Catalano, F. M. (2003). Aerodinâmica aplicada: túneis de vento e a diminuição do arrasto (Tese (Livre Docência). Universidade de São Paulo, São Carlos.
NLM
Catalano FM. Aerodinâmica aplicada: túneis de vento e a diminuição do arrasto. 2003 ;[citado 2024 set. 28 ]
Vancouver
Catalano FM. Aerodinâmica aplicada: túneis de vento e a diminuição do arrasto. 2003 ;[citado 2024 set. 28 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BORSATTI, Eugênio José e CATALANO, Fernando Martini. Projeto e construção de uma esteira rolante e sistema de controle da camada limite para a câmara de ensaios do novo túnel de vento do laboratório de aerodinâmica. 2003, Anais.. São Paulo: USP, 2003. . Acesso em: 28 set. 2024.
APA
Borsatti, E. J., & Catalano, F. M. (2003). Projeto e construção de uma esteira rolante e sistema de controle da camada limite para a câmara de ensaios do novo túnel de vento do laboratório de aerodinâmica. In Resumos. São Paulo: USP.
NLM
Borsatti EJ, Catalano FM. Projeto e construção de uma esteira rolante e sistema de controle da camada limite para a câmara de ensaios do novo túnel de vento do laboratório de aerodinâmica. Resumos. 2003 ;[citado 2024 set. 28 ]
Vancouver
Borsatti EJ, Catalano FM. Projeto e construção de uma esteira rolante e sistema de controle da camada limite para a câmara de ensaios do novo túnel de vento do laboratório de aerodinâmica. Resumos. 2003 ;[citado 2024 set. 28 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ROCHA, José Celso et al. Um controlador baseado em lógica difusa para a supressão de Flutter. 2003, Anais.. São José dos Campos: SBMAC, 2003. . Acesso em: 28 set. 2024.
APA
Rocha, J. C., Belo, E. M., De Marqui Junior, C., & Marques, F. D. (2003). Um controlador baseado em lógica difusa para a supressão de Flutter. In Anais. São José dos Campos: SBMAC.
NLM
Rocha JC, Belo EM, De Marqui Junior C, Marques FD. Um controlador baseado em lógica difusa para a supressão de Flutter. Anais. 2003 ;[citado 2024 set. 28 ]
Vancouver
Rocha JC, Belo EM, De Marqui Junior C, Marques FD. Um controlador baseado em lógica difusa para a supressão de Flutter. Anais. 2003 ;[citado 2024 set. 28 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARQUES, Flávio Donizeti. Introdução à dinâmica de vôo, equacionamento e simulação: problemas não lineares e aplicações. 2003, Anais.. São José dos Campos: SBMAC, 2003. . Acesso em: 28 set. 2024.
APA
Marques, F. D. (2003). Introdução à dinâmica de vôo, equacionamento e simulação: problemas não lineares e aplicações. In Anais. São José dos Campos: SBMAC.
NLM
Marques FD. Introdução à dinâmica de vôo, equacionamento e simulação: problemas não lineares e aplicações. Anais. 2003 ;[citado 2024 set. 28 ]
Vancouver
Marques FD. Introdução à dinâmica de vôo, equacionamento e simulação: problemas não lineares e aplicações. Anais. 2003 ;[citado 2024 set. 28 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TOTI, Francisco de Assis et al. Tenacidade à fratura dinâmica em uma liga de alumínio de alta resistência MAS 7475-T7351. 2003, Anais.. São Carlos: IFSC/EESC/IQSC-USP, 2003. . Acesso em: 28 set. 2024.
APA
Toti, F. de A., Tarpani, J. R., Bose Filho, W. W., & Spinelli, D. (2003). Tenacidade à fratura dinâmica em uma liga de alumínio de alta resistência MAS 7475-T7351. In Resumos estendidos. São Carlos: IFSC/EESC/IQSC-USP.
NLM
Toti F de A, Tarpani JR, Bose Filho WW, Spinelli D. Tenacidade à fratura dinâmica em uma liga de alumínio de alta resistência MAS 7475-T7351. Resumos estendidos. 2003 ;[citado 2024 set. 28 ]
Vancouver
Toti F de A, Tarpani JR, Bose Filho WW, Spinelli D. Tenacidade à fratura dinâmica em uma liga de alumínio de alta resistência MAS 7475-T7351. Resumos estendidos. 2003 ;[citado 2024 set. 28 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GARCIA, Ailton e SPINELLI, Dirceu. Propriedades mecânicas de tração e fadiga em chapas de aços laminados a quente. 2003, Anais.. São Carlos: IFSC/EESC/IQSC-USP, 2003. . Acesso em: 28 set. 2024.
APA
Garcia, A., & Spinelli, D. (2003). Propriedades mecânicas de tração e fadiga em chapas de aços laminados a quente. In Resumos estendidos. São Carlos: IFSC/EESC/IQSC-USP.
NLM
Garcia A, Spinelli D. Propriedades mecânicas de tração e fadiga em chapas de aços laminados a quente. Resumos estendidos. 2003 ;[citado 2024 set. 28 ]
Vancouver
Garcia A, Spinelli D. Propriedades mecânicas de tração e fadiga em chapas de aços laminados a quente. Resumos estendidos. 2003 ;[citado 2024 set. 28 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Antonio Maia de e CASTELETTI, Luiz Carlos. Microestrutura e propriedades de camadas nitretadas por plasma nos aços inoxidáveis ferríticos AISI 430E e 441. 2003, Anais.. São Carlos: IFSC/EESC/IQSC-USP, 2003. . Acesso em: 28 set. 2024.
APA
Oliveira, A. M. de, & Casteletti, L. C. (2003). Microestrutura e propriedades de camadas nitretadas por plasma nos aços inoxidáveis ferríticos AISI 430E e 441. In Resumos estendidos. São Carlos: IFSC/EESC/IQSC-USP.
NLM
Oliveira AM de, Casteletti LC. Microestrutura e propriedades de camadas nitretadas por plasma nos aços inoxidáveis ferríticos AISI 430E e 441. Resumos estendidos. 2003 ;[citado 2024 set. 28 ]
Vancouver
Oliveira AM de, Casteletti LC. Microestrutura e propriedades de camadas nitretadas por plasma nos aços inoxidáveis ferríticos AISI 430E e 441. Resumos estendidos. 2003 ;[citado 2024 set. 28 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Carlos Kleber Nascimento de e CASTELETTI, Luiz Carlos. Obtenção de revestimentos de 'NB'C' nos aços AISI H13 e AISI M2 pelo processo TD. 2003, Anais.. São Carlos: IFSC/EESC/IQSC-USP, 2003. . Acesso em: 28 set. 2024.
APA
Oliveira, C. K. N. de, & Casteletti, L. C. (2003). Obtenção de revestimentos de 'NB'C' nos aços AISI H13 e AISI M2 pelo processo TD. In Resumos estendidos. São Carlos: IFSC/EESC/IQSC-USP.
NLM
Oliveira CKN de, Casteletti LC. Obtenção de revestimentos de 'NB'C' nos aços AISI H13 e AISI M2 pelo processo TD. Resumos estendidos. 2003 ;[citado 2024 set. 28 ]
Vancouver
Oliveira CKN de, Casteletti LC. Obtenção de revestimentos de 'NB'C' nos aços AISI H13 e AISI M2 pelo processo TD. Resumos estendidos. 2003 ;[citado 2024 set. 28 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SUZUKI, Ricardo et al. Operation and typical applications of bubble eliminators for fluid deaeration. 2003, Anais.. São Paulo: Associação Brasileira de Cerâmica, 2003. . Acesso em: 28 set. 2024.
APA
Suzuki, R., Canale, L. de C. F., Totten, G. E., & Crnkovic, O. R. (2003). Operation and typical applications of bubble eliminators for fluid deaeration. In . São Paulo: Associação Brasileira de Cerâmica.
NLM
Suzuki R, Canale L de CF, Totten GE, Crnkovic OR. Operation and typical applications of bubble eliminators for fluid deaeration. 2003 ;[citado 2024 set. 28 ]
Vancouver
Suzuki R, Canale L de CF, Totten GE, Crnkovic OR. Operation and typical applications of bubble eliminators for fluid deaeration. 2003 ;[citado 2024 set. 28 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LOURENÇO, Nicélio José e ROLLO, João Manuel Domingos de Almeida. Estudo da transformação de fase em um aço microligado a partir da determinação curva CCT. 2003, Anais.. São Paulo: Associação Brasileira de Cerâmica, 2003. . Acesso em: 28 set. 2024.
APA
Lourenço, N. J., & Rollo, J. M. D. de A. (2003). Estudo da transformação de fase em um aço microligado a partir da determinação curva CCT. In . São Paulo: Associação Brasileira de Cerâmica.
NLM
Lourenço NJ, Rollo JMD de A. Estudo da transformação de fase em um aço microligado a partir da determinação curva CCT. 2003 ;[citado 2024 set. 28 ]
Vancouver
Lourenço NJ, Rollo JMD de A. Estudo da transformação de fase em um aço microligado a partir da determinação curva CCT. 2003 ;[citado 2024 set. 28 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LOURENÇO, Nicélio José e ROLLO, João Manuel Domingos de Almeida. Microstructural evaluation and continuous cooling transformation of a medium carbon microalloyed steel. 2003, Anais.. São Paulo: ABCM, 2003. . Acesso em: 28 set. 2024.
APA
Lourenço, N. J., & Rollo, J. M. D. de A. (2003). Microstructural evaluation and continuous cooling transformation of a medium carbon microalloyed steel. In Proceedings : COBEM 2003. São Paulo: ABCM.
NLM
Lourenço NJ, Rollo JMD de A. Microstructural evaluation and continuous cooling transformation of a medium carbon microalloyed steel. Proceedings : COBEM 2003. 2003 ;[citado 2024 set. 28 ]
Vancouver
Lourenço NJ, Rollo JMD de A. Microstructural evaluation and continuous cooling transformation of a medium carbon microalloyed steel. Proceedings : COBEM 2003. 2003 ;[citado 2024 set. 28 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
NAGAMINE, Renato Kazuki e MARQUES, Flávio Donizeti. Modelling the dynamical behaviour of smart beams with ER/MR fluids using FEM. 2003, Anais.. São Paulo: ABCM, 2003. . Acesso em: 28 set. 2024.
APA
Nagamine, R. K., & Marques, F. D. (2003). Modelling the dynamical behaviour of smart beams with ER/MR fluids using FEM. In Proceedings : COBEM 2003. São Paulo: ABCM.
NLM
Nagamine RK, Marques FD. Modelling the dynamical behaviour of smart beams with ER/MR fluids using FEM. Proceedings : COBEM 2003. 2003 ;[citado 2024 set. 28 ]
Vancouver
Nagamine RK, Marques FD. Modelling the dynamical behaviour of smart beams with ER/MR fluids using FEM. Proceedings : COBEM 2003. 2003 ;[citado 2024 set. 28 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TARPANI, José Ricardo e BOSE FILHO, Waldek Wladimir e SPINELLI, Dirceu. Hall-petch dependence of dynamic critical stretch zone width for a thermally embrittled RPV steel. 2003, Anais.. Rio de Janeiro: ABCM, 2003. . Acesso em: 28 set. 2024.
APA
Tarpani, J. R., Bose Filho, W. W., & Spinelli, D. (2003). Hall-petch dependence of dynamic critical stretch zone width for a thermally embrittled RPV steel. In Abstracts. Rio de Janeiro: ABCM.
NLM
Tarpani JR, Bose Filho WW, Spinelli D. Hall-petch dependence of dynamic critical stretch zone width for a thermally embrittled RPV steel. Abstracts. 2003 ;[citado 2024 set. 28 ]
Vancouver
Tarpani JR, Bose Filho WW, Spinelli D. Hall-petch dependence of dynamic critical stretch zone width for a thermally embrittled RPV steel. Abstracts. 2003 ;[citado 2024 set. 28 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TARPANI, José Ricardo e BOSE FILHO, Waldek Wladimir e SPINELLI, Dirceu. Hall-petch dependence of j-fracture toughness parameters for a RPV steel - part I: annealed microstructures. 2003, Anais.. Rio de Janeiro: ABCM, 2003. . Acesso em: 28 set. 2024.
APA
Tarpani, J. R., Bose Filho, W. W., & Spinelli, D. (2003). Hall-petch dependence of j-fracture toughness parameters for a RPV steel - part I: annealed microstructures. In Abstracts. Rio de Janeiro: ABCM.
NLM
Tarpani JR, Bose Filho WW, Spinelli D. Hall-petch dependence of j-fracture toughness parameters for a RPV steel - part I: annealed microstructures. Abstracts. 2003 ;[citado 2024 set. 28 ]
Vancouver
Tarpani JR, Bose Filho WW, Spinelli D. Hall-petch dependence of j-fracture toughness parameters for a RPV steel - part I: annealed microstructures. Abstracts. 2003 ;[citado 2024 set. 28 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LOURENÇO, Nicélio José e ROLLO, João Manuel Domingos de Almeida. Microstructural evaluation and continuous cooling transformation of a medium carbon microalloyed steel. 2003, Anais.. Rio de Janeiro: ABCM, 2003. . Acesso em: 28 set. 2024.
APA
Lourenço, N. J., & Rollo, J. M. D. de A. (2003). Microstructural evaluation and continuous cooling transformation of a medium carbon microalloyed steel. In Abstracts. Rio de Janeiro: ABCM.
NLM
Lourenço NJ, Rollo JMD de A. Microstructural evaluation and continuous cooling transformation of a medium carbon microalloyed steel. Abstracts. 2003 ;[citado 2024 set. 28 ]
Vancouver
Lourenço NJ, Rollo JMD de A. Microstructural evaluation and continuous cooling transformation of a medium carbon microalloyed steel. Abstracts. 2003 ;[citado 2024 set. 28 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, A. M. et al. Microestrutural analysis of the ion nitrided layer of the ferritic stainless steel AISI 439. Acta Microscopica. Rio de Janeiro: SBMM. . Acesso em: 28 set. 2024. , 2003
APA
Oliveira, A. M., Munõz Riofano, R. M., Casteletti, L. C., Tremiliosi Filho, G., & Bento, C. A. da S. (2003). Microestrutural analysis of the ion nitrided layer of the ferritic stainless steel AISI 439. Acta Microscopica. Rio de Janeiro: SBMM.
NLM
Oliveira AM, Munõz Riofano RM, Casteletti LC, Tremiliosi Filho G, Bento CA da S. Microestrutural analysis of the ion nitrided layer of the ferritic stainless steel AISI 439. Acta Microscopica. 2003 ; 12 207-208.[citado 2024 set. 28 ]
Vancouver
Oliveira AM, Munõz Riofano RM, Casteletti LC, Tremiliosi Filho G, Bento CA da S. Microestrutural analysis of the ion nitrided layer of the ferritic stainless steel AISI 439. Acta Microscopica. 2003 ; 12 207-208.[citado 2024 set. 28 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BEZERRA, R. M. et al. Ligas de platina como catalizadores de moléculas orgânicas. 2003, Anais.. São Carlos: IFSC/EESC/IQSC-USP, 2003. . Acesso em: 28 set. 2024.
APA
Bezerra, R. M., Bento, C. A. da S., Tremiliosi Filho, G., & Casteletti, L. C. (2003). Ligas de platina como catalizadores de moléculas orgânicas. In Resumos estendidos. São Carlos: IFSC/EESC/IQSC-USP.
NLM
Bezerra RM, Bento CA da S, Tremiliosi Filho G, Casteletti LC. Ligas de platina como catalizadores de moléculas orgânicas. Resumos estendidos. 2003 ;[citado 2024 set. 28 ]
Vancouver
Bezerra RM, Bento CA da S, Tremiliosi Filho G, Casteletti LC. Ligas de platina como catalizadores de moléculas orgânicas. Resumos estendidos. 2003 ;[citado 2024 set. 28 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PASCHOAL, André Luís et al. Metallic biomaterials TiN-coated: corrosion analysis and biocompatibility. Artificial Organs. Malden: Escola de Engenharia de São Carlos, Universidade de São Paulo. Disponível em: http://www.blackwell-synergy.com/links/doi/10.1046/j.1525-1594.2003.07241.x/full/. Acesso em: 28 set. 2024. , 2003
APA
Paschoal, A. L., Venâncio, E. C., Canale, L. de C. F., Silva, O. L. da, Vilca, D. H., & Motheo, A. de J. (2003). Metallic biomaterials TiN-coated: corrosion analysis and biocompatibility. Artificial Organs. Malden: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de http://www.blackwell-synergy.com/links/doi/10.1046/j.1525-1594.2003.07241.x/full/
NLM
Paschoal AL, Venâncio EC, Canale L de CF, Silva OL da, Vilca DH, Motheo A de J. Metallic biomaterials TiN-coated: corrosion analysis and biocompatibility [Internet]. Artificial Organs. 2003 ; 27( 5): 461-464.[citado 2024 set. 28 ] Available from: http://www.blackwell-synergy.com/links/doi/10.1046/j.1525-1594.2003.07241.x/full/
Vancouver
Paschoal AL, Venâncio EC, Canale L de CF, Silva OL da, Vilca DH, Motheo A de J. Metallic biomaterials TiN-coated: corrosion analysis and biocompatibility [Internet]. Artificial Organs. 2003 ; 27( 5): 461-464.[citado 2024 set. 28 ] Available from: http://www.blackwell-synergy.com/links/doi/10.1046/j.1525-1594.2003.07241.x/full/
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Maíra Martins da et al. An experimental investigation on the modal characteristics of an off-road competition vehicle chassis. 2003, Anais.. São Paulo, SP: SAE Brasil, 2003. Disponível em: https://repositorio.usp.br/directbitstream/a4d902b0-3aeb-48cd-842a-0342267bf741/OK___artigo%2009%20-%20An%20Experimental%20Investigation%20on%20the%20Modal%20Characteristics%20of%20an%20Off-Road%20Competition%20Vehicle%20Chassis.%20%28SAE%20Technical%20Paper%20Series%29.pdf. Acesso em: 28 set. 2024.
APA
Silva, M. M. da, Oliveira, L. P. R. de, Ericsson, L. G. S., Costa Neto, Á., & Varoto, P. S. (2003). An experimental investigation on the modal characteristics of an off-road competition vehicle chassis. In Proceedings. São Paulo, SP: SAE Brasil. Recuperado de https://repositorio.usp.br/directbitstream/a4d902b0-3aeb-48cd-842a-0342267bf741/OK___artigo%2009%20-%20An%20Experimental%20Investigation%20on%20the%20Modal%20Characteristics%20of%20an%20Off-Road%20Competition%20Vehicle%20Chassis.%20%28SAE%20Technical%20Paper%20Series%29.pdf
NLM
Silva MM da, Oliveira LPR de, Ericsson LGS, Costa Neto Á, Varoto PS. An experimental investigation on the modal characteristics of an off-road competition vehicle chassis [Internet]. Proceedings. 2003 ;[citado 2024 set. 28 ] Available from: https://repositorio.usp.br/directbitstream/a4d902b0-3aeb-48cd-842a-0342267bf741/OK___artigo%2009%20-%20An%20Experimental%20Investigation%20on%20the%20Modal%20Characteristics%20of%20an%20Off-Road%20Competition%20Vehicle%20Chassis.%20%28SAE%20Technical%20Paper%20Series%29.pdf
Vancouver
Silva MM da, Oliveira LPR de, Ericsson LGS, Costa Neto Á, Varoto PS. An experimental investigation on the modal characteristics of an off-road competition vehicle chassis [Internet]. Proceedings. 2003 ;[citado 2024 set. 28 ] Available from: https://repositorio.usp.br/directbitstream/a4d902b0-3aeb-48cd-842a-0342267bf741/OK___artigo%2009%20-%20An%20Experimental%20Investigation%20on%20the%20Modal%20Characteristics%20of%20an%20Off-Road%20Competition%20Vehicle%20Chassis.%20%28SAE%20Technical%20Paper%20Series%29.pdf
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PASSARINI, Luis Carlos e NAKAJIMA, P. R. Development of a high-speed solenoid valve: an investigation of the importance of the armature mass on the dynamic response. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 25, n. 4, p. 329-335, 2003Tradução . . Disponível em: https://doi.org/10.1590/S1678-58782003000400003. Acesso em: 28 set. 2024.
APA
Passarini, L. C., & Nakajima, P. R. (2003). Development of a high-speed solenoid valve: an investigation of the importance of the armature mass on the dynamic response. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 25( 4), 329-335. doi:10.1590/S1678-58782003000400003
NLM
Passarini LC, Nakajima PR. Development of a high-speed solenoid valve: an investigation of the importance of the armature mass on the dynamic response [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2003 ; 25( 4): 329-335.[citado 2024 set. 28 ] Available from: https://doi.org/10.1590/S1678-58782003000400003
Vancouver
Passarini LC, Nakajima PR. Development of a high-speed solenoid valve: an investigation of the importance of the armature mass on the dynamic response [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2003 ; 25( 4): 329-335.[citado 2024 set. 28 ] Available from: https://doi.org/10.1590/S1678-58782003000400003