A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart. Machinability study of single crystal silicon in ultraprecision machining. 2009, Anais.. Rio de Janeiro: ABCM, 2009. . Acesso em: 02 out. 2024.
APA
Jasinevicius, R. G. (2009). Machinability study of single crystal silicon in ultraprecision machining. In . Rio de Janeiro: ABCM.
NLM
Jasinevicius RG. Machinability study of single crystal silicon in ultraprecision machining. 2009 ;[citado 2024 out. 02 ]
Vancouver
Jasinevicius RG. Machinability study of single crystal silicon in ultraprecision machining. 2009 ;[citado 2024 out. 02 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart e DUDUCH, Jaime Gilberto e PIZANI, Paulo Sérgio. The crystallographic direction influence on the brittle to ductile transition in diamond turning of silicon crystal. 2009, Anais.. Monterey: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2009. . Acesso em: 02 out. 2024.
APA
Jasinevicius, R. G., Duduch, J. G., & Pizani, P. S. (2009). The crystallographic direction influence on the brittle to ductile transition in diamond turning of silicon crystal. In Proceedings. Monterey: Escola de Engenharia de São Carlos, Universidade de São Paulo.
NLM
Jasinevicius RG, Duduch JG, Pizani PS. The crystallographic direction influence on the brittle to ductile transition in diamond turning of silicon crystal. Proceedings. 2009 ;[citado 2024 out. 02 ]
Vancouver
Jasinevicius RG, Duduch JG, Pizani PS. The crystallographic direction influence on the brittle to ductile transition in diamond turning of silicon crystal. Proceedings. 2009 ;[citado 2024 out. 02 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DIAS, Paulo Nuno Pereira e JASINEVICIUS, Renato Goulart. Hot molding process evaluation of microstructures generated by micro machining and micro indentations. 2009, Anais.. San Sebastian: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2009. . Acesso em: 02 out. 2024.
APA
Dias, P. N. P., & Jasinevicius, R. G. (2009). Hot molding process evaluation of microstructures generated by micro machining and micro indentations. In Proceedings of the euspen. San Sebastian: Escola de Engenharia de São Carlos, Universidade de São Paulo.
NLM
Dias PNP, Jasinevicius RG. Hot molding process evaluation of microstructures generated by micro machining and micro indentations. Proceedings of the euspen. 2009 ;[citado 2024 out. 02 ]
Vancouver
Dias PNP, Jasinevicius RG. Hot molding process evaluation of microstructures generated by micro machining and micro indentations. Proceedings of the euspen. 2009 ;[citado 2024 out. 02 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart et al. Brittle and ductile removal modes observed during diamond turning of carbon nanotube composites. Proceedings of Institution of Mechanical Engineers. Part B. Journal of Engineering Manufacture, v. 223, n. Ja 2009, p. 1-8, 2009Tradução . . Disponível em: https://doi.org/10.1243/09544054jem1257. Acesso em: 02 out. 2024.
APA
Jasinevicius, R. G., Andreeta, M. R. B., Fossa, J. S., Hernandes, A. C., Duduch, J. G., Demont, P., & Puech, P. (2009). Brittle and ductile removal modes observed during diamond turning of carbon nanotube composites. Proceedings of Institution of Mechanical Engineers. Part B. Journal of Engineering Manufacture, 223( Ja 2009), 1-8. doi:10.1243/09544054jem1257
NLM
Jasinevicius RG, Andreeta MRB, Fossa JS, Hernandes AC, Duduch JG, Demont P, Puech P. Brittle and ductile removal modes observed during diamond turning of carbon nanotube composites [Internet]. Proceedings of Institution of Mechanical Engineers. Part B. Journal of Engineering Manufacture. 2009 ; 223( Ja 2009): 1-8.[citado 2024 out. 02 ] Available from: https://doi.org/10.1243/09544054jem1257
Vancouver
Jasinevicius RG, Andreeta MRB, Fossa JS, Hernandes AC, Duduch JG, Demont P, Puech P. Brittle and ductile removal modes observed during diamond turning of carbon nanotube composites [Internet]. Proceedings of Institution of Mechanical Engineers. Part B. Journal of Engineering Manufacture. 2009 ; 223( Ja 2009): 1-8.[citado 2024 out. 02 ] Available from: https://doi.org/10.1243/09544054jem1257
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart e PIZANI, Paulo Sérgio. The influence of crystallographic orientation upon material removal modes in single point diamond turning of silicon. 2009, Anais.. San Sebastian: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2009. . Acesso em: 02 out. 2024.
APA
Jasinevicius, R. G., & Pizani, P. S. (2009). The influence of crystallographic orientation upon material removal modes in single point diamond turning of silicon. In Proceedings of the euspen. San Sebastian: Escola de Engenharia de São Carlos, Universidade de São Paulo.
NLM
Jasinevicius RG, Pizani PS. The influence of crystallographic orientation upon material removal modes in single point diamond turning of silicon. Proceedings of the euspen. 2009 ;[citado 2024 out. 02 ]
Vancouver
Jasinevicius RG, Pizani PS. The influence of crystallographic orientation upon material removal modes in single point diamond turning of silicon. Proceedings of the euspen. 2009 ;[citado 2024 out. 02 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Helder Augustus Treviso da et al. Estudo dos modos de remoção do silício monocristalino e liga metálica não-ferrosa no torneamento com diamante através da emissão acústica. 2009, Anais.. Rio de Janeiro: ABCM, 2009. . Acesso em: 02 out. 2024.
APA
Silva, H. A. T. da, Duduch, J. G., Jasinevicius, R. G., & Porto, A. J. V. (2009). Estudo dos modos de remoção do silício monocristalino e liga metálica não-ferrosa no torneamento com diamante através da emissão acústica. In . Rio de Janeiro: ABCM.
NLM
Silva HAT da, Duduch JG, Jasinevicius RG, Porto AJV. Estudo dos modos de remoção do silício monocristalino e liga metálica não-ferrosa no torneamento com diamante através da emissão acústica. 2009 ;[citado 2024 out. 02 ]
Vancouver
Silva HAT da, Duduch JG, Jasinevicius RG, Porto AJV. Estudo dos modos de remoção do silício monocristalino e liga metálica não-ferrosa no torneamento com diamante através da emissão acústica. 2009 ;[citado 2024 out. 02 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DIAS, Paulo Nuno Pereira e JASINEVICIUS, Renato Goulart. Avaliação da micromoldagem através de prensagem a frio de microestruturas geradas através de torneamento com ferramenta de diamante. 2009, Anais.. Rio de Janeiro: ABCM, 2009. . Acesso em: 02 out. 2024.
APA
Dias, P. N. P., & Jasinevicius, R. G. (2009). Avaliação da micromoldagem através de prensagem a frio de microestruturas geradas através de torneamento com ferramenta de diamante. In . Rio de Janeiro: ABCM.
NLM
Dias PNP, Jasinevicius RG. Avaliação da micromoldagem através de prensagem a frio de microestruturas geradas através de torneamento com ferramenta de diamante. 2009 ;[citado 2024 out. 02 ]
Vancouver
Dias PNP, Jasinevicius RG. Avaliação da micromoldagem através de prensagem a frio de microestruturas geradas através de torneamento com ferramenta de diamante. 2009 ;[citado 2024 out. 02 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JAVAREZ JUNIOR, Laércio et al. Microestruturas replicadas em PMMA aquecido, obtidas em processo de laminação. Revista Minerva, v. 6, n. 2, p. 197-202, 2009Tradução . . Disponível em: http://www.fipai.org.br/Minerva%2006(02)%2010.pdf. Acesso em: 02 out. 2024.
APA
Javarez Junior, L., Montanari, L., Jasinevicius, R. G., & Duduch, J. G. (2009). Microestruturas replicadas em PMMA aquecido, obtidas em processo de laminação. Revista Minerva, 6( 2), 197-202. Recuperado de http://www.fipai.org.br/Minerva%2006(02)%2010.pdf
NLM
Javarez Junior L, Montanari L, Jasinevicius RG, Duduch JG. Microestruturas replicadas em PMMA aquecido, obtidas em processo de laminação [Internet]. Revista Minerva. 2009 ; 6( 2): 197-202.[citado 2024 out. 02 ] Available from: http://www.fipai.org.br/Minerva%2006(02)%2010.pdf
Vancouver
Javarez Junior L, Montanari L, Jasinevicius RG, Duduch JG. Microestruturas replicadas em PMMA aquecido, obtidas em processo de laminação [Internet]. Revista Minerva. 2009 ; 6( 2): 197-202.[citado 2024 out. 02 ] Available from: http://www.fipai.org.br/Minerva%2006(02)%2010.pdf
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ARAUJO, Luis Antonio Oliveira et al. Corte de precisão de materiais frágeis com discos abrasivos. 2009, Anais.. São Paulo: Associação Brasileira de Cerâmica, 2009. . Acesso em: 02 out. 2024.
APA
Araujo, L. A. O., Foschini, C. R., Jasinevicius, R. G., & Fortulan, C. A. (2009). Corte de precisão de materiais frágeis com discos abrasivos. In Anais. São Paulo: Associação Brasileira de Cerâmica.
NLM
Araujo LAO, Foschini CR, Jasinevicius RG, Fortulan CA. Corte de precisão de materiais frágeis com discos abrasivos. Anais. 2009 ;[citado 2024 out. 02 ]
Vancouver
Araujo LAO, Foschini CR, Jasinevicius RG, Fortulan CA. Corte de precisão de materiais frágeis com discos abrasivos. Anais. 2009 ;[citado 2024 out. 02 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart et al. Precision micromachining of carbon nanotubes composites. 2009, Anais.. San Sebastian: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2009. Disponível em: https://repositorio.usp.br/directbitstream/bfe3c800-f66d-4069-89e9-e7e48a08ccd8/prod_000826_sysno_1769737.pdf. Acesso em: 02 out. 2024.
APA
Jasinevicius, R. G., Duduch, J. G., Porto, A. J. V., Andreeta, M. R. B., Hernandes, A. C., & Puech, P. (2009). Precision micromachining of carbon nanotubes composites. In Proceedings of the euspen. San Sebastian: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/bfe3c800-f66d-4069-89e9-e7e48a08ccd8/prod_000826_sysno_1769737.pdf
NLM
Jasinevicius RG, Duduch JG, Porto AJV, Andreeta MRB, Hernandes AC, Puech P. Precision micromachining of carbon nanotubes composites [Internet]. Proceedings of the euspen. 2009 ;[citado 2024 out. 02 ] Available from: https://repositorio.usp.br/directbitstream/bfe3c800-f66d-4069-89e9-e7e48a08ccd8/prod_000826_sysno_1769737.pdf
Vancouver
Jasinevicius RG, Duduch JG, Porto AJV, Andreeta MRB, Hernandes AC, Puech P. Precision micromachining of carbon nanotubes composites [Internet]. Proceedings of the euspen. 2009 ;[citado 2024 out. 02 ] Available from: https://repositorio.usp.br/directbitstream/bfe3c800-f66d-4069-89e9-e7e48a08ccd8/prod_000826_sysno_1769737.pdf
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CARVALHO, Matheus Henrique Pestana de e JASINEVICIUS, Renato Goulart. Estudo do monitoramento através de emissão acústica do torneamento com ferramenta de diamante de titânio. 2009, Anais.. São Paulo: USP, 2009. . Acesso em: 02 out. 2024.
APA
Carvalho, M. H. P. de, & Jasinevicius, R. G. (2009). Estudo do monitoramento através de emissão acústica do torneamento com ferramenta de diamante de titânio. In Resumos. São Paulo: USP.
NLM
Carvalho MHP de, Jasinevicius RG. Estudo do monitoramento através de emissão acústica do torneamento com ferramenta de diamante de titânio. Resumos. 2009 ;[citado 2024 out. 02 ]
Vancouver
Carvalho MHP de, Jasinevicius RG. Estudo do monitoramento através de emissão acústica do torneamento com ferramenta de diamante de titânio. Resumos. 2009 ;[citado 2024 out. 02 ]