ReP USP - Resultado da busca

Artigo de periodico
Assessment of replication fidelity of optical microstructures by hot embossing (2017)
Cirino, Giuseppe Antonio; Granado, Renê Mendes; Mohammed-Brahim, Tayeb; Jasinevicius, Renato Goulart
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Assunto: DIAMANTE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CIRINO, Giuseppe Antonio et al. Assessment of replication fidelity of optical microstructures by hot embossing. International Journal of Advanced Manufacturing Technology, v. 88, n. Ja 2017, p. 303-316, 2017Tradução . . Disponível em: https://doi.org/10.1007/s00170-016-8757-3. Acesso em: 03 nov. 2024.
APA
Cirino, G. A., Granado, R. M., Mohammed-Brahim, T., & Jasinevicius, R. G. (2017). Assessment of replication fidelity of optical microstructures by hot embossing. International Journal of Advanced Manufacturing Technology, 88( Ja 2017), 303-316. doi:10.1007/s00170-016-8757-3
NLM
Cirino GA, Granado RM, Mohammed-Brahim T, Jasinevicius RG. Assessment of replication fidelity of optical microstructures by hot embossing [Internet]. International Journal of Advanced Manufacturing Technology. 2017 ; 88( Ja 2017): 303-316.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1007/s00170-016-8757-3
Vancouver
Cirino GA, Granado RM, Mohammed-Brahim T, Jasinevicius RG. Assessment of replication fidelity of optical microstructures by hot embossing [Internet]. International Journal of Advanced Manufacturing Technology. 2017 ; 88( Ja 2017): 303-316.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1007/s00170-016-8757-3
Trabalho de evento
Diamond tool wear analysis during machining of microstructure surface for microinjection molding (2013)
Jasinevicius, Renato Goulart; Granado, Renê Mendes; Cirino, Giuseppe Antonio
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: DIAMANTE, FERRAMENTAS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart e GRANADO, Renê Mendes e CIRINO, Giuseppe Antonio. Diamond tool wear analysis during machining of microstructure surface for microinjection molding. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. . Acesso em: 03 nov. 2024.
APA
Jasinevicius, R. G., Granado, R. M., & Cirino, G. A. (2013). Diamond tool wear analysis during machining of microstructure surface for microinjection molding. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM.
NLM
Jasinevicius RG, Granado RM, Cirino GA. Diamond tool wear analysis during machining of microstructure surface for microinjection molding. Proceedings of COBEM. 2013 ;[citado 2024 nov. 03 ]
Vancouver
Jasinevicius RG, Granado RM, Cirino GA. Diamond tool wear analysis during machining of microstructure surface for microinjection molding. Proceedings of COBEM. 2013 ;[citado 2024 nov. 03 ]
Artigo de periodico
Diamond turning of small Fresnel lens array in single crystal InSb (2013)
Jasinevicius, Renato Goulart; Duduch, Jaime Gilberto; Cirino, Giuseppe Antonio; Pizani, Paulo Sergio
Source: Journal of Micromechanics and Microengineering. Unidade: EESC
Subjects: DIAMANTE, FERRAMENTAS, ESPECTROSCOPIA RAMAN, MICROSCOPIA ELETRÔNICA DE VARREDURA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart et al. Diamond turning of small Fresnel lens array in single crystal InSb. Journal of Micromechanics and Microengineering, v. 23, n. 5, p. 055025(1-12), 2013Tradução . . Disponível em: https://doi.org/10.1088/0960-1317/23/5/055025. Acesso em: 03 nov. 2024.
APA
Jasinevicius, R. G., Duduch, J. G., Cirino, G. A., & Pizani, P. S. (2013). Diamond turning of small Fresnel lens array in single crystal InSb. Journal of Micromechanics and Microengineering, 23( 5), 055025(1-12). doi:10.1088/0960-1317/23/5/055025
NLM
Jasinevicius RG, Duduch JG, Cirino GA, Pizani PS. Diamond turning of small Fresnel lens array in single crystal InSb [Internet]. Journal of Micromechanics and Microengineering. 2013 ; 23( 5): 055025(1-12).[citado 2024 nov. 03 ] Available from: https://doi.org/10.1088/0960-1317/23/5/055025
Vancouver
Jasinevicius RG, Duduch JG, Cirino GA, Pizani PS. Diamond turning of small Fresnel lens array in single crystal InSb [Internet]. Journal of Micromechanics and Microengineering. 2013 ; 23( 5): 055025(1-12).[citado 2024 nov. 03 ] Available from: https://doi.org/10.1088/0960-1317/23/5/055025
Trabalho de evento
Microinjection evaluation of a diamond turned diffraction optical element (2013)
Granado, Renê Mendes; Jasinevicius, Renato Goulart; Cirino, Giuseppe Antonio
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: FERRAMENTAS, DIAMANTE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GRANADO, Renê Mendes e JASINEVICIUS, Renato Goulart e CIRINO, Giuseppe Antonio. Microinjection evaluation of a diamond turned diffraction optical element. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. . Acesso em: 03 nov. 2024.
APA
Granado, R. M., Jasinevicius, R. G., & Cirino, G. A. (2013). Microinjection evaluation of a diamond turned diffraction optical element. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM.
NLM
Granado RM, Jasinevicius RG, Cirino GA. Microinjection evaluation of a diamond turned diffraction optical element. Proceedings of COBEM. 2013 ;[citado 2024 nov. 03 ]
Vancouver
Granado RM, Jasinevicius RG, Cirino GA. Microinjection evaluation of a diamond turned diffraction optical element. Proceedings of COBEM. 2013 ;[citado 2024 nov. 03 ]
Trabalho de evento
Moldagem por injeção de microcomponentes ópticos em PMMA (2013)
Granado, Renê Mendes; Jasinevicius, Renato Goulart; Cirino, Giuseppe Antonio; Camilo, Jose Ricardo
Source: Anais. Conference titles: Congresso Brasileiro de Engenharia de Fabricação - COBEF. Unidade: EESC
Subjects: FERRAMENTAS, DIAMANTE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GRANADO, Renê Mendes et al. Moldagem por injeção de microcomponentes ópticos em PMMA. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: http://www.abcm.org.br/anais/cobef/2013/PDFS/COBEF2013-0031.PDF. Acesso em: 03 nov. 2024.
APA
Granado, R. M., Jasinevicius, R. G., Cirino, G. A., & Camilo, J. R. (2013). Moldagem por injeção de microcomponentes ópticos em PMMA. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de http://www.abcm.org.br/anais/cobef/2013/PDFS/COBEF2013-0031.PDF
NLM
Granado RM, Jasinevicius RG, Cirino GA, Camilo JR. Moldagem por injeção de microcomponentes ópticos em PMMA [Internet]. Anais. 2013 ;[citado 2024 nov. 03 ] Available from: http://www.abcm.org.br/anais/cobef/2013/PDFS/COBEF2013-0031.PDF
Vancouver
Granado RM, Jasinevicius RG, Cirino GA, Camilo JR. Moldagem por injeção de microcomponentes ópticos em PMMA [Internet]. Anais. 2013 ;[citado 2024 nov. 03 ] Available from: http://www.abcm.org.br/anais/cobef/2013/PDFS/COBEF2013-0031.PDF
Trabalho de evento
Diamond turning of novel materials (2011)
Jasinevicius, Renato Goulart; Duduch, Jaime Gilberto; Porto, Arthur José Vieira; Pizani, Paulo Sérgio
Source: Conference Proceedings. Conference titles: euspen International Conference. Unidade: EESC
Subjects: DIAMANTE, NANOTECNOLOGIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart et al. Diamond turning of novel materials. 2011, Anais.. Deft: euspen, 2011. Disponível em: http://www.euspen.eu/default.asp?langid=1&contentid=1451. Acesso em: 03 nov. 2024.
APA
Jasinevicius, R. G., Duduch, J. G., Porto, A. J. V., & Pizani, P. S. (2011). Diamond turning of novel materials. In Conference Proceedings. Deft: euspen. Recuperado de http://www.euspen.eu/default.asp?langid=1&contentid=1451
NLM
Jasinevicius RG, Duduch JG, Porto AJV, Pizani PS. Diamond turning of novel materials [Internet]. Conference Proceedings. 2011 ;[citado 2024 nov. 03 ] Available from: http://www.euspen.eu/default.asp?langid=1&contentid=1451
Vancouver
Jasinevicius RG, Duduch JG, Porto AJV, Pizani PS. Diamond turning of novel materials [Internet]. Conference Proceedings. 2011 ;[citado 2024 nov. 03 ] Available from: http://www.euspen.eu/default.asp?langid=1&contentid=1451
Trabalho de evento
Single point diamond turning of tungsten carbide (2011)
Gonçalves, André da Motta; Duduch, Jaime Gilberto; Jasinevicius, Renato Goulart; Montanari, Luciana; Porto, Arthur José Vieira; Choung, Lii Chao
Source: Conference Proceedings. Conference titles: euspen International Conference. Unidade: EESC
Subjects: TUNGSTÊNIO, DIAMANTE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GONÇALVES, André da Motta et al. Single point diamond turning of tungsten carbide. 2011, Anais.. Deft: euspen, 2011. Disponível em: http://www.euspen.eu/default.asp?langid=1&contentid=1451. Acesso em: 03 nov. 2024.
APA
Gonçalves, A. da M., Duduch, J. G., Jasinevicius, R. G., Montanari, L., Porto, A. J. V., & Choung, L. C. (2011). Single point diamond turning of tungsten carbide. In Conference Proceedings. Deft: euspen. Recuperado de http://www.euspen.eu/default.asp?langid=1&contentid=1451
NLM
Gonçalves A da M, Duduch JG, Jasinevicius RG, Montanari L, Porto AJV, Choung LC. Single point diamond turning of tungsten carbide [Internet]. Conference Proceedings. 2011 ;[citado 2024 nov. 03 ] Available from: http://www.euspen.eu/default.asp?langid=1&contentid=1451
Vancouver
Gonçalves A da M, Duduch JG, Jasinevicius RG, Montanari L, Porto AJV, Choung LC. Single point diamond turning of tungsten carbide [Internet]. Conference Proceedings. 2011 ;[citado 2024 nov. 03 ] Available from: http://www.euspen.eu/default.asp?langid=1&contentid=1451
Trabalho de evento
On the fabrication of Fresnel lens array in soft semiconductor crystal by use of ultraprecision diamond turning (2011)
Jasinevicius, Renato Goulart; Porto, Arthur José Vieira; Duduch, Jaime Gilberto; Pizani, Paulo Sérgio
Source: Conference Proceedings. Conference titles: euspen International Conference. Unidade: EESC
Subjects: DIAMANTE, SEMICONDUTORES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart et al. On the fabrication of Fresnel lens array in soft semiconductor crystal by use of ultraprecision diamond turning. 2011, Anais.. Deft: euspen, 2011. Disponível em: http://www.euspen.eu/default.asp?langid=1&contentid=1451. Acesso em: 03 nov. 2024.
APA
Jasinevicius, R. G., Porto, A. J. V., Duduch, J. G., & Pizani, P. S. (2011). On the fabrication of Fresnel lens array in soft semiconductor crystal by use of ultraprecision diamond turning. In Conference Proceedings. Deft: euspen. Recuperado de http://www.euspen.eu/default.asp?langid=1&contentid=1451
NLM
Jasinevicius RG, Porto AJV, Duduch JG, Pizani PS. On the fabrication of Fresnel lens array in soft semiconductor crystal by use of ultraprecision diamond turning [Internet]. Conference Proceedings. 2011 ;[citado 2024 nov. 03 ] Available from: http://www.euspen.eu/default.asp?langid=1&contentid=1451
Vancouver
Jasinevicius RG, Porto AJV, Duduch JG, Pizani PS. On the fabrication of Fresnel lens array in soft semiconductor crystal by use of ultraprecision diamond turning [Internet]. Conference Proceedings. 2011 ;[citado 2024 nov. 03 ] Available from: http://www.euspen.eu/default.asp?langid=1&contentid=1451
Trabalho de evento
Machinability study of single crystal silicon in ultraprecision machining (2009)
Jasinevicius, Renato Goulart
Conference titles: Congresso Brasileiro de Engenharia de Fabricação - COBEF. Unidade: EESC
Subjects: DIAMANTE, SILÍCIO, FERRAMENTAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart. Machinability study of single crystal silicon in ultraprecision machining. 2009, Anais.. Rio de Janeiro: ABCM, 2009. . Acesso em: 03 nov. 2024.
APA
Jasinevicius, R. G. (2009). Machinability study of single crystal silicon in ultraprecision machining. In . Rio de Janeiro: ABCM.
NLM
Jasinevicius RG. Machinability study of single crystal silicon in ultraprecision machining. 2009 ;[citado 2024 nov. 03 ]
Vancouver
Jasinevicius RG. Machinability study of single crystal silicon in ultraprecision machining. 2009 ;[citado 2024 nov. 03 ]
Trabalho de evento
The crystallographic direction influence on the brittle to ductile transition in diamond turning of silicon crystal (2009)
Jasinevicius, Renato Goulart; Duduch, Jaime Gilberto; Pizani, Paulo Sérgio
Source: Proceedings. Conference titles: ASPE Annual Meeting. Unidade: EESC
Subjects: TENSÃO RESIDUAL, DIAMANTE, DUCTILIDADE, SILÍCIO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart e DUDUCH, Jaime Gilberto e PIZANI, Paulo Sérgio. The crystallographic direction influence on the brittle to ductile transition in diamond turning of silicon crystal. 2009, Anais.. Monterey: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2009. . Acesso em: 03 nov. 2024.
APA
Jasinevicius, R. G., Duduch, J. G., & Pizani, P. S. (2009). The crystallographic direction influence on the brittle to ductile transition in diamond turning of silicon crystal. In Proceedings. Monterey: Escola de Engenharia de São Carlos, Universidade de São Paulo.
NLM
Jasinevicius RG, Duduch JG, Pizani PS. The crystallographic direction influence on the brittle to ductile transition in diamond turning of silicon crystal. Proceedings. 2009 ;[citado 2024 nov. 03 ]
Vancouver
Jasinevicius RG, Duduch JG, Pizani PS. The crystallographic direction influence on the brittle to ductile transition in diamond turning of silicon crystal. Proceedings. 2009 ;[citado 2024 nov. 03 ]
Trabalho de evento
The influence of crystallographic orientation upon material removal modes in single point diamond turning of silicon (2009)
Jasinevicius, Renato Goulart; Pizani, Paulo Sérgio
Source: Proceedings of the euspen. Conference titles: International Conference of the European Society for Precision Engineering & Nanotechnology. Unidade: EESC
Subjects: DIAMANTE, DUCTILIDADE, NANOTECNOLOGIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart e PIZANI, Paulo Sérgio. The influence of crystallographic orientation upon material removal modes in single point diamond turning of silicon. 2009, Anais.. San Sebastian: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2009. . Acesso em: 03 nov. 2024.
APA
Jasinevicius, R. G., & Pizani, P. S. (2009). The influence of crystallographic orientation upon material removal modes in single point diamond turning of silicon. In Proceedings of the euspen. San Sebastian: Escola de Engenharia de São Carlos, Universidade de São Paulo.
NLM
Jasinevicius RG, Pizani PS. The influence of crystallographic orientation upon material removal modes in single point diamond turning of silicon. Proceedings of the euspen. 2009 ;[citado 2024 nov. 03 ]
Vancouver
Jasinevicius RG, Pizani PS. The influence of crystallographic orientation upon material removal modes in single point diamond turning of silicon. Proceedings of the euspen. 2009 ;[citado 2024 nov. 03 ]
Artigo de periodico
Structure evaluation of submicrometre silicon chips removed by diamond turning (2007)
Jasinevicius, Renato Goulart; Duduch, Jaime Gilberto; Pizani, Paulo Sérgio
Source: Semiconductor Science and Technology. Unidade: EESC
Subjects: SEMICONDUTORES, MICROSCÓPIO ELETRÔNICO, DIAMANTE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart e DUDUCH, Jaime Gilberto e PIZANI, Paulo Sérgio. Structure evaluation of submicrometre silicon chips removed by diamond turning. Semiconductor Science and Technology, v. 22, n. 5, p. 561-573, 2007Tradução . . Disponível em: https://doi.org/10.1088/0268-1242/22/5/019. Acesso em: 03 nov. 2024.
APA
Jasinevicius, R. G., Duduch, J. G., & Pizani, P. S. (2007). Structure evaluation of submicrometre silicon chips removed by diamond turning. Semiconductor Science and Technology, 22( 5), 561-573. doi:10.1088/0268-1242/22/5/019
NLM
Jasinevicius RG, Duduch JG, Pizani PS. Structure evaluation of submicrometre silicon chips removed by diamond turning [Internet]. Semiconductor Science and Technology. 2007 ; 22( 5): 561-573.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1088/0268-1242/22/5/019
Vancouver
Jasinevicius RG, Duduch JG, Pizani PS. Structure evaluation of submicrometre silicon chips removed by diamond turning [Internet]. Semiconductor Science and Technology. 2007 ; 22( 5): 561-573.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1088/0268-1242/22/5/019
Artigo de periodico
Surface integrity of ultra-precision diamond turned 'TI' (commercially pure) and 'TI' alloy ('TI'-6'AL'-4V) (2007)
Colafemina, João Paulo; Jasinevicius, Renato Goulart; Duduch, Jaime Gilberto
Source: Proceedings of the Institution of Mechanical Engineers. Part B. Journal of Engineering Manufacture. Unidade: EESC
Subjects: USINAGEM, LIGAS NÃO FERROSAS, TITÂNIO, DIAMANTE, FERRAMENTAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COLAFEMINA, João Paulo e JASINEVICIUS, Renato Goulart e DUDUCH, Jaime Gilberto. Surface integrity of ultra-precision diamond turned 'TI' (commercially pure) and 'TI' alloy ('TI'-6'AL'-4V). Proceedings of the Institution of Mechanical Engineers. Part B. Journal of Engineering Manufacture, v. 221, n. B6, p. 999-1006, 2007Tradução . . Acesso em: 03 nov. 2024.
APA
Colafemina, J. P., Jasinevicius, R. G., & Duduch, J. G. (2007). Surface integrity of ultra-precision diamond turned 'TI' (commercially pure) and 'TI' alloy ('TI'-6'AL'-4V). Proceedings of the Institution of Mechanical Engineers. Part B. Journal of Engineering Manufacture, 221( B6), 999-1006.
NLM
Colafemina JP, Jasinevicius RG, Duduch JG. Surface integrity of ultra-precision diamond turned 'TI' (commercially pure) and 'TI' alloy ('TI'-6'AL'-4V). Proceedings of the Institution of Mechanical Engineers. Part B. Journal of Engineering Manufacture. 2007 ; 221( B6): 999-1006.[citado 2024 nov. 03 ]
Vancouver
Colafemina JP, Jasinevicius RG, Duduch JG. Surface integrity of ultra-precision diamond turned 'TI' (commercially pure) and 'TI' alloy ('TI'-6'AL'-4V). Proceedings of the Institution of Mechanical Engineers. Part B. Journal of Engineering Manufacture. 2007 ; 221( B6): 999-1006.[citado 2024 nov. 03 ]
Artigo de periodico
On the ductile response dependence upon phase transformation in diamond turning of semiconductors (2007)
Jasinevicius, Renato Goulart; Pizani, Paulo Sérgio
Source: Physica Status Solidi B : basic research. Unidade: EESC
Subjects: SEMICONDUTORES, DIAMANTE, DUCTILIDADE, MUDANÇA DE FASE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart e PIZANI, Paulo Sérgio. On the ductile response dependence upon phase transformation in diamond turning of semiconductors. Physica Status Solidi B : basic research, v. 244, n. Ja 2007, p. 261-265, 2007Tradução . . Disponível em: https://doi.org/10.1002/pssb.200672554. Acesso em: 03 nov. 2024.
APA
Jasinevicius, R. G., & Pizani, P. S. (2007). On the ductile response dependence upon phase transformation in diamond turning of semiconductors. Physica Status Solidi B : basic research, 244( Ja 2007), 261-265. doi:10.1002/pssb.200672554
NLM
Jasinevicius RG, Pizani PS. On the ductile response dependence upon phase transformation in diamond turning of semiconductors [Internet]. Physica Status Solidi B : basic research. 2007 ; 244( Ja 2007): 261-265.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1002/pssb.200672554
Vancouver
Jasinevicius RG, Pizani PS. On the ductile response dependence upon phase transformation in diamond turning of semiconductors [Internet]. Physica Status Solidi B : basic research. 2007 ; 244( Ja 2007): 261-265.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1002/pssb.200672554
Artigo de periodico
Annealing treatment of amorphous silicon generated by single point diamond turning (2007)
Jasinevicius, Renato Goulart; Pizani, Paulo Sérgio
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: SILICONE, DIAMANTE, RECOZIMENTO, ESPECTROSCOPIA RAMAN
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart e PIZANI, Paulo Sérgio. Annealing treatment of amorphous silicon generated by single point diamond turning. International Journal of Advanced Manufacturing Technology, v. 34, n. 7-8, p. 680-688, 2007Tradução . . Disponível em: https://doi.org/10.1007/s00170-006-0650-z. Acesso em: 03 nov. 2024.
APA
Jasinevicius, R. G., & Pizani, P. S. (2007). Annealing treatment of amorphous silicon generated by single point diamond turning. International Journal of Advanced Manufacturing Technology, 34( 7-8), 680-688. doi:10.1007/s00170-006-0650-z
NLM
Jasinevicius RG, Pizani PS. Annealing treatment of amorphous silicon generated by single point diamond turning [Internet]. International Journal of Advanced Manufacturing Technology. 2007 ; 34( 7-8): 680-688.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1007/s00170-006-0650-z
Vancouver
Jasinevicius RG, Pizani PS. Annealing treatment of amorphous silicon generated by single point diamond turning [Internet]. International Journal of Advanced Manufacturing Technology. 2007 ; 34( 7-8): 680-688.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1007/s00170-006-0650-z
Artigo de periodico
A origem da ductilidade de monocristais de silício na usinagem com ferramenta de diamante (2006)
Jasinevicius, Renato Goulart; Pizani, Paulo Sergio
Source: Máquinas e Metais. Unidade: EESC
Subjects: DUCTILIDADE, SILÍCIO, USINAGEM, DIAMANTE, FERRAMENTAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart e PIZANI, Paulo Sergio. A origem da ductilidade de monocristais de silício na usinagem com ferramenta de diamante. Máquinas e Metais, v. 42, n. 487, p. 122-141, 2006Tradução . . Acesso em: 03 nov. 2024.
APA
Jasinevicius, R. G., & Pizani, P. S. (2006). A origem da ductilidade de monocristais de silício na usinagem com ferramenta de diamante. Máquinas e Metais, 42( 487), 122-141.
NLM
Jasinevicius RG, Pizani PS. A origem da ductilidade de monocristais de silício na usinagem com ferramenta de diamante. Máquinas e Metais. 2006 ; 42( 487): 122-141.[citado 2024 nov. 03 ]
Vancouver
Jasinevicius RG, Pizani PS. A origem da ductilidade de monocristais de silício na usinagem com ferramenta de diamante. Máquinas e Metais. 2006 ; 42( 487): 122-141.[citado 2024 nov. 03 ]
Trabalho de evento
High pressure phase transformation in single crystal silicon during ductile regime diamond turning (2005)
Jasinevicius, Renato Goulart; Pizani, P. S.
Source: Proceedings of the COBEM 2005. Conference titles: International Congress of Mechanical Engineering. Unidade: EESC
Subjects: MUDANÇA DE FASE, DIAMANTE, FERRAMENTAS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart e PIZANI, P. S. High pressure phase transformation in single crystal silicon during ductile regime diamond turning. 2005, Anais.. Rio de Janeiro, RJ: ABCM, 2005. Disponível em: http://www.abcm.org.br/anais/cobem/2005/PDF/COBEM2005-1560.pdf. Acesso em: 03 nov. 2024.
APA
Jasinevicius, R. G., & Pizani, P. S. (2005). High pressure phase transformation in single crystal silicon during ductile regime diamond turning. In Proceedings of the COBEM 2005. Rio de Janeiro, RJ: ABCM. Recuperado de http://www.abcm.org.br/anais/cobem/2005/PDF/COBEM2005-1560.pdf
NLM
Jasinevicius RG, Pizani PS. High pressure phase transformation in single crystal silicon during ductile regime diamond turning [Internet]. Proceedings of the COBEM 2005. 2005 ;[citado 2024 nov. 03 ] Available from: http://www.abcm.org.br/anais/cobem/2005/PDF/COBEM2005-1560.pdf
Vancouver
Jasinevicius RG, Pizani PS. High pressure phase transformation in single crystal silicon during ductile regime diamond turning [Internet]. Proceedings of the COBEM 2005. 2005 ;[citado 2024 nov. 03 ] Available from: http://www.abcm.org.br/anais/cobem/2005/PDF/COBEM2005-1560.pdf

USP Schools

ReP

Filtros

Authors

Date published

Subjects

Source title

Conference titles

Countries/Territories

Indexado em