ReP USP - Resultado da busca

Artigo de periodico
Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling (2023)
Amaral, Ana Carolina Godoy; De Marqui Júnior, Carlos ; Silveira, Marcos
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: MOBILIDADE URBANA, PANDEMIAS, COVID-19, SISTEMAS DINÂMICOS, AEROELASTICIDADE DE AERONAVES, PIEZOELETRICIDADE, ENERGIA, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AMARAL, Ana Carolina Godoy e DE MARQUI JÚNIOR, Carlos e SILVEIRA, Marcos. Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 45, p. 1-14, 2023Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03783-6. Acesso em: 27 nov. 2025.
APA
Amaral, A. C. G., De Marqui Júnior, C., & Silveira, M. (2023). Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 1-14. doi:10.1007/s40430-022-03783-6
NLM
Amaral ACG, De Marqui Júnior C, Silveira M. Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-14.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s40430-022-03783-6
Vancouver
Amaral ACG, De Marqui Júnior C, Silveira M. Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-14.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s40430-022-03783-6
Artigo de periodico
A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil (2022)
Maia, Cristiana Brasil; Silva, Felipe Venâncio Mitkiewicz; Cabezas Gómez, Luben
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: ENERGIA ELÉTRICA, ÁGUA, DESSALINIZAÇÃO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MAIA, Cristiana Brasil e SILVA, Felipe Venâncio Mitkiewicz e CABEZAS GÓMEZ, Luben. A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, p. 1-16, 2022Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03463-5. Acesso em: 27 nov. 2025.
APA
Maia, C. B., Silva, F. V. M., & Cabezas Gómez, L. (2022). A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, 1-16. doi:10.1007/s40430-022-03463-5
NLM
Maia CB, Silva FVM, Cabezas Gómez L. A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-16.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s40430-022-03463-5
Vancouver
Maia CB, Silva FVM, Cabezas Gómez L. A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-16.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s40430-022-03463-5
Artigo de periodico
Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment (2022)
Leal, José Eduardo Silveira; Martiniano, Guilherme Antonelli; Bose Filho, Waldek Wladimir ; Craidy, Pedro da Silva; Paes, Marcelo Torres Piza; Ferreira, Daniel Correia Freire ; Valdés Arencibia, Rosenda; Franco, Sinésio Domingues
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: HIDROGÊNIO, NANOCOMPOSITOS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LEAL, José Eduardo Silveira et al. Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, p. 1-13, 2022Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03783-6. Acesso em: 27 nov. 2025.
APA
Leal, J. E. S., Martiniano, G. A., Bose Filho, W. W., Craidy, P. da S., Paes, M. T. P., Ferreira, D. C. F., et al. (2022). Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, 1-13. doi:10.1007/s40430-022-03783-6
NLM
Leal JES, Martiniano GA, Bose Filho WW, Craidy P da S, Paes MTP, Ferreira DCF, Valdés Arencibia R, Franco SD. Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-13.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s40430-022-03783-6
Vancouver
Leal JES, Martiniano GA, Bose Filho WW, Craidy P da S, Paes MTP, Ferreira DCF, Valdés Arencibia R, Franco SD. Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-13.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s40430-022-03783-6
Artigo de periodico
Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system (2022)
Santos, Fernando Neves Quintino dos; Colmanetti, Alex Roger Almeida; Cabezas Gómez, Luben ; Tibiriçá, Cristiano Bigonha
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: REFRIGERAÇÃO, AQUECIMENTO, GERAÇÃO DE ENERGIA ELÉTRICA, TERMOELETRICIDADE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Fernando Neves Quintino dos et al. Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, p. 1-11, 2022Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03791-6. Acesso em: 27 nov. 2025.
APA
Santos, F. N. Q. dos, Colmanetti, A. R. A., Cabezas Gómez, L., & Tibiriçá, C. B. (2022). Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, 1-11. doi:10.1007/s40430-022-03791-6
NLM
Santos FNQ dos, Colmanetti ARA, Cabezas Gómez L, Tibiriçá CB. Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-11.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s40430-022-03791-6
Vancouver
Santos FNQ dos, Colmanetti ARA, Cabezas Gómez L, Tibiriçá CB. Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-11.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s40430-022-03791-6
Artigo de periodico
Cross section modeling of the non-uniform corrosion due to chloride ingress using the positional finite element method (2020)
Ramos, Evérton Souza; Carrazedo, Rogério
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, ESTRUTURAS DE CONCRETO ARMADO, CORROSÃO, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RAMOS, Evérton Souza e CARRAZEDO, Rogério. Cross section modeling of the non-uniform corrosion due to chloride ingress using the positional finite element method. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 42, p. 1-18, 2020Tradução . . Disponível em: https://doi.org/10.1007/s40430-020-02627-5. Acesso em: 27 nov. 2025.
APA
Ramos, E. S., & Carrazedo, R. (2020). Cross section modeling of the non-uniform corrosion due to chloride ingress using the positional finite element method. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-18. doi:10.1007/s40430-020-02627-5
NLM
Ramos ES, Carrazedo R. Cross section modeling of the non-uniform corrosion due to chloride ingress using the positional finite element method [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-18.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s40430-020-02627-5
Vancouver
Ramos ES, Carrazedo R. Cross section modeling of the non-uniform corrosion due to chloride ingress using the positional finite element method [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-18.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s40430-020-02627-5
Artigo de periodico
On the robustness of a model‑based inverse force identifcation applied on a structure submerged in diferent media (2020)
Álvarez Briceño, Ricardo Patricio; Naets, Frank; Desmet, Wim; Oliveira, Leopoldo Pisanelli Rodrigues de
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: FILTROS DE KALMAN, DINÂMICA DAS ESTRUTURAS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ÁLVAREZ BRICEÑO, Ricardo Patricio et al. On the robustness of a model‑based inverse force identifcation applied on a structure submerged in diferent media. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 42, p. 1-13, 2020Tradução . . Disponível em: https://doi.org/10.1007/s40430-020-02583-0. Acesso em: 27 nov. 2025.
APA
Álvarez Briceño, R. P., Naets, F., Desmet, W., & Oliveira, L. P. R. de. (2020). On the robustness of a model‑based inverse force identifcation applied on a structure submerged in diferent media. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-13. doi:10.1007/s40430-020-02583-0
NLM
Álvarez Briceño RP, Naets F, Desmet W, Oliveira LPR de. On the robustness of a model‑based inverse force identifcation applied on a structure submerged in diferent media [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-13.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s40430-020-02583-0
Vancouver
Álvarez Briceño RP, Naets F, Desmet W, Oliveira LPR de. On the robustness of a model‑based inverse force identifcation applied on a structure submerged in diferent media [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-13.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s40430-020-02583-0
Artigo de periodico
Study of tool paths calculated by diferent commercial CAM systems and infuences on the real machining time and surface roughness for milling free-form geometries (2019)
Souza, Adriano Fagali de; Kasemodel, Rodrigo Berretta; Arias, Marcelo; Marin, Felipe; Rodrigues, Alessandro Roger
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: FERRAMENTAS, FRESAGEM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUZA, Adriano Fagali de et al. Study of tool paths calculated by diferent commercial CAM systems and infuences on the real machining time and surface roughness for milling free-form geometries. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 41, n. 363, p. 01-12, 2019Tradução . . Disponível em: https://doi.org/10.1007/s40430-019-1865-x. Acesso em: 27 nov. 2025.
APA
Souza, A. F. de, Kasemodel, R. B., Arias, M., Marin, F., & Rodrigues, A. R. (2019). Study of tool paths calculated by diferent commercial CAM systems and infuences on the real machining time and surface roughness for milling free-form geometries. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41( 363), 01-12. doi:10.1007/s40430-019-1865-x
NLM
Souza AF de, Kasemodel RB, Arias M, Marin F, Rodrigues AR. Study of tool paths calculated by diferent commercial CAM systems and infuences on the real machining time and surface roughness for milling free-form geometries [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2019 ; 41( 363): 01-12.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s40430-019-1865-x
Vancouver
Souza AF de, Kasemodel RB, Arias M, Marin F, Rodrigues AR. Study of tool paths calculated by diferent commercial CAM systems and infuences on the real machining time and surface roughness for milling free-form geometries [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2019 ; 41( 363): 01-12.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s40430-019-1865-x
Artigo de periodico
Numerical experiments of ascending bubbles for fluid dynamic force calculations (2018)
Barbi, Franco; Pivello, Marcio Ricardo; Villar, Millena Martins; Serfaty, Ricardo; Roma, Alexandre Megiorin ; Silveira Neto, Aristeu da
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: IME
Assunto: DINÂMICA DE FLUÍDOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BARBI, Franco et al. Numerical experiments of ascending bubbles for fluid dynamic force calculations. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 40, n. 11, p. 1-12, 2018Tradução . . Disponível em: https://doi.org/10.1007/s40430-018-1435-7. Acesso em: 27 nov. 2025.
APA
Barbi, F., Pivello, M. R., Villar, M. M., Serfaty, R., Roma, A. M., & Silveira Neto, A. da. (2018). Numerical experiments of ascending bubbles for fluid dynamic force calculations. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40( 11), 1-12. doi:10.1007/s40430-018-1435-7
NLM
Barbi F, Pivello MR, Villar MM, Serfaty R, Roma AM, Silveira Neto A da. Numerical experiments of ascending bubbles for fluid dynamic force calculations [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018 ; 40( 11): 1-12.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s40430-018-1435-7
Vancouver
Barbi F, Pivello MR, Villar MM, Serfaty R, Roma AM, Silveira Neto A da. Numerical experiments of ascending bubbles for fluid dynamic force calculations [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018 ; 40( 11): 1-12.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s40430-018-1435-7
Artigo de periodico
Effects of condensation in microchannels with a porous boundary: analytical investigation on heat transfer and meniscus shape (2002)
Riehl, Roger Ribeiro; Ochterbeck, Jay M.; Seleghim Junior, Paulo
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: TRANSFERÊNCIA DE CALOR, TEMPERATURA, ESCOAMENTO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIEHL, Roger Ribeiro e OCHTERBECK, Jay M. e SELEGHIM JUNIOR, Paulo. Effects of condensation in microchannels with a porous boundary: analytical investigation on heat transfer and meniscus shape. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 24, n. 3, p. 186-193, 2002Tradução . . Disponível em: https://doi.org/10.1590/S0100-73862002000300006. Acesso em: 27 nov. 2025.
APA
Riehl, R. R., Ochterbeck, J. M., & Seleghim Junior, P. (2002). Effects of condensation in microchannels with a porous boundary: analytical investigation on heat transfer and meniscus shape. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 24( 3), 186-193. doi:10.1590/S0100-73862002000300006
NLM
Riehl RR, Ochterbeck JM, Seleghim Junior P. Effects of condensation in microchannels with a porous boundary: analytical investigation on heat transfer and meniscus shape [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2002 ; 24( 3): 186-193.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1590/S0100-73862002000300006
Vancouver
Riehl RR, Ochterbeck JM, Seleghim Junior P. Effects of condensation in microchannels with a porous boundary: analytical investigation on heat transfer and meniscus shape [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2002 ; 24( 3): 186-193.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1590/S0100-73862002000300006

USP Schools

ReP

Filtros

Authors

USP affiliated authors

Date published

Subjects

Indexado em

Non normalized affiliation

Countries of institutions of collaboration