ReP USP - Resultado da busca

Artigo de periodico
Orthotropic elastic properties for UHPFRC based on two-phase model homogenization (2024)
Ribeiro, Paula O.; Carrazedo, Ricardo ; Oliveira, Caroline Oliveira e; Krahl, Pablo Augusto
Source: Construction and Building Materials. Unidade: EESC
Subjects: CONCRETO REFORÇADO COM FIBRAS, TENSÃO ESTRUTURAL, HOMOGENEIZAÇÃO, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Paula O. et al. Orthotropic elastic properties for UHPFRC based on two-phase model homogenization. Construction and Building Materials, v. 440, p. 1-16, 2024Tradução . . Disponível em: https://dx.doi.org/10.1016/j.conbuildmat.2024.137304. Acesso em: 14 ago. 2024.
APA
Ribeiro, P. O., Carrazedo, R., Oliveira, C. O. e, & Krahl, P. A. (2024). Orthotropic elastic properties for UHPFRC based on two-phase model homogenization. Construction and Building Materials, 440, 1-16. doi:10.1016/j.conbuildmat.2024.137304
NLM
Ribeiro PO, Carrazedo R, Oliveira CO e, Krahl PA. Orthotropic elastic properties for UHPFRC based on two-phase model homogenization [Internet]. Construction and Building Materials. 2024 ; 440 1-16.[citado 2024 ago. 14 ] Available from: https://dx.doi.org/10.1016/j.conbuildmat.2024.137304
Vancouver
Ribeiro PO, Carrazedo R, Oliveira CO e, Krahl PA. Orthotropic elastic properties for UHPFRC based on two-phase model homogenization [Internet]. Construction and Building Materials. 2024 ; 440 1-16.[citado 2024 ago. 14 ] Available from: https://dx.doi.org/10.1016/j.conbuildmat.2024.137304
Tese (Doutorado)
Aeroelastic analysis of a lightweight topology-optimized sandwich panel (2023)
Najafi, Maliheh; Marques, Flavio Donizeti (Orientador)
Unidade: EESC
Subjects: PAINÉIS SANDWICH, AEROELASTICIDADE DE AERONAVES, MÉTODO DOS ELEMENTOS FINITOS, HOMOGENEIZAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
NAJAFI, Maliheh. Aeroelastic analysis of a lightweight topology-optimized sandwich panel. 2023. Tese (Doutorado) – Universidade de São Paulo, São Carlos, 2023. Disponível em: https://www.teses.usp.br/teses/disponiveis/18/18162/tde-24112023-100910/. Acesso em: 14 ago. 2024.
APA
Najafi, M. (2023). Aeroelastic analysis of a lightweight topology-optimized sandwich panel (Tese (Doutorado). Universidade de São Paulo, São Carlos. Recuperado de https://www.teses.usp.br/teses/disponiveis/18/18162/tde-24112023-100910/
NLM
Najafi M. Aeroelastic analysis of a lightweight topology-optimized sandwich panel [Internet]. 2023 ;[citado 2024 ago. 14 ] Available from: https://www.teses.usp.br/teses/disponiveis/18/18162/tde-24112023-100910/
Vancouver
Najafi M. Aeroelastic analysis of a lightweight topology-optimized sandwich panel [Internet]. 2023 ;[citado 2024 ago. 14 ] Available from: https://www.teses.usp.br/teses/disponiveis/18/18162/tde-24112023-100910/
Trabalho de evento-resumo
Asymptotic Homogenization Method used to predict the effective properties of laminated composites considering delamination influence (2023)
Christoff, Bruno Guilherme; Brito Santana, Humberto; Tita, Volnei
Conference titles: Conferência Luso-Brasileira de Adesão e Adesivos - CLBA. Unidade: EESC
Subjects: HOMOGENEIZAÇÃO, LAMINADOS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CHRISTOFF, Bruno Guilherme e BRITO SANTANA, Humberto e TITA, Volnei. Asymptotic Homogenization Method used to predict the effective properties of laminated composites considering delamination influence. 2023, Anais.. São Carlos, SP: EESC, 2023. Disponível em: https://repositorio.usp.br/directbitstream/42abdd79-048b-48ba-a7d1-0b947a8c79e9/artigo%202.pdf. Acesso em: 14 ago. 2024.
APA
Christoff, B. G., Brito Santana, H., & Tita, V. (2023). Asymptotic Homogenization Method used to predict the effective properties of laminated composites considering delamination influence. In . São Carlos, SP: EESC. Recuperado de https://repositorio.usp.br/directbitstream/42abdd79-048b-48ba-a7d1-0b947a8c79e9/artigo%202.pdf
NLM
Christoff BG, Brito Santana H, Tita V. Asymptotic Homogenization Method used to predict the effective properties of laminated composites considering delamination influence [Internet]. 2023 ;[citado 2024 ago. 14 ] Available from: https://repositorio.usp.br/directbitstream/42abdd79-048b-48ba-a7d1-0b947a8c79e9/artigo%202.pdf
Vancouver
Christoff BG, Brito Santana H, Tita V. Asymptotic Homogenization Method used to predict the effective properties of laminated composites considering delamination influence [Internet]. 2023 ;[citado 2024 ago. 14 ] Available from: https://repositorio.usp.br/directbitstream/42abdd79-048b-48ba-a7d1-0b947a8c79e9/artigo%202.pdf
Artigo de periodico
A multiscale topology optimisation framework for hollow spheres as cellular materials (2023)
Christoff, Bruno Guilherme; Almeida Júnior, José Humberto Santos; Cardoso, Eduardo L.
Source: Engineering Structures. Unidade: EESC
Subjects: TOPOLOGIA, HOMOGENEIZAÇÃO, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CHRISTOFF, Bruno Guilherme e ALMEIDA JÚNIOR, José Humberto Santos e CARDOSO, Eduardo L. A multiscale topology optimisation framework for hollow spheres as cellular materials. Engineering Structures, v. 284, p. 1-13, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.engstruct.2023.115990. Acesso em: 14 ago. 2024.
APA
Christoff, B. G., Almeida Júnior, J. H. S., & Cardoso, E. L. (2023). A multiscale topology optimisation framework for hollow spheres as cellular materials. Engineering Structures, 284, 1-13. doi:10.1016/j.engstruct.2023.115990
NLM
Christoff BG, Almeida Júnior JHS, Cardoso EL. A multiscale topology optimisation framework for hollow spheres as cellular materials [Internet]. Engineering Structures. 2023 ; 284 1-13.[citado 2024 ago. 14 ] Available from: https://doi.org/10.1016/j.engstruct.2023.115990
Vancouver
Christoff BG, Almeida Júnior JHS, Cardoso EL. A multiscale topology optimisation framework for hollow spheres as cellular materials [Internet]. Engineering Structures. 2023 ; 284 1-13.[citado 2024 ago. 14 ] Available from: https://doi.org/10.1016/j.engstruct.2023.115990
Artigo de periodico
Influence of the geometric parameters on the effective properties of piezoelectric composite sensors using real measurements and a new RVE (2023)
Silva, Matheus Rodrigues; Tita, Volnei ; Medeiros, Ricardo de
Source: Composite Structures. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, PIEZOELETRICIDADE, HOMOGENEIZAÇÃO, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Matheus Rodrigues e TITA, Volnei e MEDEIROS, Ricardo de. Influence of the geometric parameters on the effective properties of piezoelectric composite sensors using real measurements and a new RVE. Composite Structures, v. 303, p. 1-12, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.compstruct.2022.116292. Acesso em: 14 ago. 2024.
APA
Silva, M. R., Tita, V., & Medeiros, R. de. (2023). Influence of the geometric parameters on the effective properties of piezoelectric composite sensors using real measurements and a new RVE. Composite Structures, 303, 1-12. doi:10.1016/j.compstruct.2022.116292
NLM
Silva MR, Tita V, Medeiros R de. Influence of the geometric parameters on the effective properties of piezoelectric composite sensors using real measurements and a new RVE [Internet]. Composite Structures. 2023 ; 303 1-12.[citado 2024 ago. 14 ] Available from: https://doi.org/10.1016/j.compstruct.2022.116292
Vancouver
Silva MR, Tita V, Medeiros R de. Influence of the geometric parameters on the effective properties of piezoelectric composite sensors using real measurements and a new RVE [Internet]. Composite Structures. 2023 ; 303 1-12.[citado 2024 ago. 14 ] Available from: https://doi.org/10.1016/j.compstruct.2022.116292
Artigo de periodico
Multiscale embedded models to determine effective mechanical properties of composite materials: asymptotic Homogenization Method combined to Finite Element Method (2022)
Christoff, Bruno Guilherme; Brito Santana, Humberto; Talreja, Ramesh; Tita, Volnei
Source: Composites Part C: Open Access. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, MATERIAIS COMPÓSITOS, HOMOGENEIZAÇÃO, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CHRISTOFF, Bruno Guilherme et al. Multiscale embedded models to determine effective mechanical properties of composite materials: asymptotic Homogenization Method combined to Finite Element Method. Composites Part C: Open Access, p. 1-14, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.jcomc.2022.100303. Acesso em: 14 ago. 2024.
APA
Christoff, B. G., Brito Santana, H., Talreja, R., & Tita, V. (2022). Multiscale embedded models to determine effective mechanical properties of composite materials: asymptotic Homogenization Method combined to Finite Element Method. Composites Part C: Open Access, 1-14. doi:10.1016/j.jcomc.2022.100303
NLM
Christoff BG, Brito Santana H, Talreja R, Tita V. Multiscale embedded models to determine effective mechanical properties of composite materials: asymptotic Homogenization Method combined to Finite Element Method [Internet]. Composites Part C: Open Access. 2022 ; 1-14.[citado 2024 ago. 14 ] Available from: https://doi.org/10.1016/j.jcomc.2022.100303
Vancouver
Christoff BG, Brito Santana H, Talreja R, Tita V. Multiscale embedded models to determine effective mechanical properties of composite materials: asymptotic Homogenization Method combined to Finite Element Method [Internet]. Composites Part C: Open Access. 2022 ; 1-14.[citado 2024 ago. 14 ] Available from: https://doi.org/10.1016/j.jcomc.2022.100303
Artigo de periodico
Prediction of effective properties for multilayered laminated composite with delamination: a multiscale methodology proposal (2022)
Guinovart Sanjuan, David; Rodríguez Ramos, R.; Vajravelu, K.; Mohapatra, R.; Guinovart Díaz, R; Brito Santana, H.; Tita, Volnei ; Sabina, F. J.
Source: Composite Structures. Unidade: EESC
Subjects: PIEZOELETRICIDADE, HOMOGENEIZAÇÃO, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GUINOVART SANJUAN, David et al. Prediction of effective properties for multilayered laminated composite with delamination: a multiscale methodology proposal. Composite Structures, v. 297, p. 1-12, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.compstruct.2022.115910. Acesso em: 14 ago. 2024.
APA
Guinovart Sanjuan, D., Rodríguez Ramos, R., Vajravelu, K., Mohapatra, R., Guinovart Díaz, R., Brito Santana, H., et al. (2022). Prediction of effective properties for multilayered laminated composite with delamination: a multiscale methodology proposal. Composite Structures, 297, 1-12. doi:10.1016/j.compstruct.2022.115910
NLM
Guinovart Sanjuan D, Rodríguez Ramos R, Vajravelu K, Mohapatra R, Guinovart Díaz R, Brito Santana H, Tita V, Sabina FJ. Prediction of effective properties for multilayered laminated composite with delamination: a multiscale methodology proposal [Internet]. Composite Structures. 2022 ; 297 1-12.[citado 2024 ago. 14 ] Available from: https://doi.org/10.1016/j.compstruct.2022.115910
Vancouver
Guinovart Sanjuan D, Rodríguez Ramos R, Vajravelu K, Mohapatra R, Guinovart Díaz R, Brito Santana H, Tita V, Sabina FJ. Prediction of effective properties for multilayered laminated composite with delamination: a multiscale methodology proposal [Internet]. Composite Structures. 2022 ; 297 1-12.[citado 2024 ago. 14 ] Available from: https://doi.org/10.1016/j.compstruct.2022.115910
Artigo de periodico
Analysis of boundary layer influence on effective shear modulus of 3- 1 longitudinally porous elastic solid (2020)
Aguiar, Adair Roberto ; Prado, Edmar Borges Theóphilo; Silva, Uziel Paulo da
Source: Latin American Journal of Solids and Structures. Unidade: EESC
Subjects: ELASTICIDADE DAS ESTRUTURAS, MÉTODO DOS ELEMENTOS FINITOS, HOMOGENEIZAÇÃO, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AGUIAR, Adair Roberto e PRADO, Edmar Borges Theóphilo e SILVA, Uziel Paulo da. Analysis of boundary layer influence on effective shear modulus of 3- 1 longitudinally porous elastic solid. Latin American Journal of Solids and Structures, v. 17, n. 8 (Thematic Section), p. 1-19, 2020Tradução . . Disponível em: https://doi.org/10.1590/1679-78255960. Acesso em: 14 ago. 2024.
APA
Aguiar, A. R., Prado, E. B. T., & Silva, U. P. da. (2020). Analysis of boundary layer influence on effective shear modulus of 3- 1 longitudinally porous elastic solid. Latin American Journal of Solids and Structures, 17( 8 (Thematic Section), 1-19. doi:10.1590/1679-78255960
NLM
Aguiar AR, Prado EBT, Silva UP da. Analysis of boundary layer influence on effective shear modulus of 3- 1 longitudinally porous elastic solid [Internet]. Latin American Journal of Solids and Structures. 2020 ; 17( 8 (Thematic Section): 1-19.[citado 2024 ago. 14 ] Available from: https://doi.org/10.1590/1679-78255960
Vancouver
Aguiar AR, Prado EBT, Silva UP da. Analysis of boundary layer influence on effective shear modulus of 3- 1 longitudinally porous elastic solid [Internet]. Latin American Journal of Solids and Structures. 2020 ; 17( 8 (Thematic Section): 1-19.[citado 2024 ago. 14 ] Available from: https://doi.org/10.1590/1679-78255960
Artigo de periodico
Development of an ABAQUS™ plug-in to evaluate the fourth-order elasticity tensor of a periodic material via homogenization by the asymptotic expansion method (2020)
Christoff, Bruno Guilherme; Brito Santana, Humberto; Talreja, Ramesh; Tita, Volnei
Source: Finite Elements in Analysis and Design. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, HOMOGENEIZAÇÃO, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CHRISTOFF, Bruno Guilherme et al. Development of an ABAQUS™ plug-in to evaluate the fourth-order elasticity tensor of a periodic material via homogenization by the asymptotic expansion method. Finite Elements in Analysis and Design, v. 181, p. 1-13, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.finel.2020.103482. Acesso em: 14 ago. 2024.
APA
Christoff, B. G., Brito Santana, H., Talreja, R., & Tita, V. (2020). Development of an ABAQUS™ plug-in to evaluate the fourth-order elasticity tensor of a periodic material via homogenization by the asymptotic expansion method. Finite Elements in Analysis and Design, 181, 1-13. doi:10.1016/j.finel.2020.103482
NLM
Christoff BG, Brito Santana H, Talreja R, Tita V. Development of an ABAQUS™ plug-in to evaluate the fourth-order elasticity tensor of a periodic material via homogenization by the asymptotic expansion method [Internet]. Finite Elements in Analysis and Design. 2020 ; 181 1-13.[citado 2024 ago. 14 ] Available from: https://doi.org/10.1016/j.finel.2020.103482
Vancouver
Christoff BG, Brito Santana H, Talreja R, Tita V. Development of an ABAQUS™ plug-in to evaluate the fourth-order elasticity tensor of a periodic material via homogenization by the asymptotic expansion method [Internet]. Finite Elements in Analysis and Design. 2020 ; 181 1-13.[citado 2024 ago. 14 ] Available from: https://doi.org/10.1016/j.finel.2020.103482
Artigo de periodico
Austenite reversion kinetics and stability during tempering of an additively manufactured maraging 300 steel (2019)
Conde, Fabio Faria ; Escobar, Julian; Oliveira, J P; Jardini, A L; Bose Filho, Waldek Wladimir ; Ávila Diaz, Julián Arnaldo
Source: Additive Manufacturing. Unidade: EESC
Subjects: HOMOGENEIZAÇÃO, AÇO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CONDE, Fabio Faria et al. Austenite reversion kinetics and stability during tempering of an additively manufactured maraging 300 steel. Additive Manufacturing, v. 29, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.addma.2019.100804. Acesso em: 14 ago. 2024.
APA
Conde, F. F., Escobar, J., Oliveira, J. P., Jardini, A. L., Bose Filho, W. W., & Ávila Diaz, J. A. (2019). Austenite reversion kinetics and stability during tempering of an additively manufactured maraging 300 steel. Additive Manufacturing, 29. doi:10.1016/j.addma.2019.100804
NLM
Conde FF, Escobar J, Oliveira JP, Jardini AL, Bose Filho WW, Ávila Diaz JA. Austenite reversion kinetics and stability during tempering of an additively manufactured maraging 300 steel [Internet]. Additive Manufacturing. 2019 ; 29[citado 2024 ago. 14 ] Available from: https://doi.org/10.1016/j.addma.2019.100804
Vancouver
Conde FF, Escobar J, Oliveira JP, Jardini AL, Bose Filho WW, Ávila Diaz JA. Austenite reversion kinetics and stability during tempering of an additively manufactured maraging 300 steel [Internet]. Additive Manufacturing. 2019 ; 29[citado 2024 ago. 14 ] Available from: https://doi.org/10.1016/j.addma.2019.100804
Artigo de periodico
Delamination influence on elastic properties of laminated composites (2019)
Santana, Humberto Brito; Christoff, Bruno Guilherme; Ferreira, Antonio Joaquim Mendes; Lebon, Frédéric; Rodríguez Ramos, Reinaldo; Tita, Volnei
Source: Acta Mechanica. Unidade: EESC
Subjects: LAMINADOS, HOMOGENEIZAÇÃO, MÉTODO DOS ELEMENTOS FINITOS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTANA, Humberto Brito et al. Delamination influence on elastic properties of laminated composites. Acta Mechanica, v. 230, n. 3, p. 821-837, 2019Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/80c3b7e2-7489-4291-8a45-3b33d0619691/artigo%2021%20-%20Delamination%20influence%20on%20elastic%20properties%20of%20laminated%20composites.%20%28ACTA%20MECHANICA%29.pdf. Acesso em: 14 ago. 2024.
APA
Santana, H. B., Christoff, B. G., Ferreira, A. J. M., Lebon, F., Rodríguez Ramos, R., & Tita, V. (2019). Delamination influence on elastic properties of laminated composites. Acta Mechanica, 230( 3), 821-837. Recuperado de https://repositorio.usp.br/directbitstream/80c3b7e2-7489-4291-8a45-3b33d0619691/artigo%2021%20-%20Delamination%20influence%20on%20elastic%20properties%20of%20laminated%20composites.%20%28ACTA%20MECHANICA%29.pdf
NLM
Santana HB, Christoff BG, Ferreira AJM, Lebon F, Rodríguez Ramos R, Tita V. Delamination influence on elastic properties of laminated composites [Internet]. Acta Mechanica. 2019 ; 230( 3): 821-837.[citado 2024 ago. 14 ] Available from: https://repositorio.usp.br/directbitstream/80c3b7e2-7489-4291-8a45-3b33d0619691/artigo%2021%20-%20Delamination%20influence%20on%20elastic%20properties%20of%20laminated%20composites.%20%28ACTA%20MECHANICA%29.pdf
Vancouver
Santana HB, Christoff BG, Ferreira AJM, Lebon F, Rodríguez Ramos R, Tita V. Delamination influence on elastic properties of laminated composites [Internet]. Acta Mechanica. 2019 ; 230( 3): 821-837.[citado 2024 ago. 14 ] Available from: https://repositorio.usp.br/directbitstream/80c3b7e2-7489-4291-8a45-3b33d0619691/artigo%2021%20-%20Delamination%20influence%20on%20elastic%20properties%20of%20laminated%20composites.%20%28ACTA%20MECHANICA%29.pdf
Artigo de periodico
Multiscale analysis for predicting the constitutive tensor effective coefficients of layered composites with micro and macro failures (2019)
Santana, Humberto Brito; Thiesen, Jose Luís Medeiros; Medeiros, Ricardo de; Ferreira, Antonio Joaquim Mendes; Rodríguez Ramos, Reinaldo; Tita, Volnei
Source: Applied Mathematical Modelling. Unidade: EESC
Subjects: HOMOGENEIZAÇÃO, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTANA, Humberto Brito et al. Multiscale analysis for predicting the constitutive tensor effective coefficients of layered composites with micro and macro failures. Applied Mathematical Modelling, v. 75, p. 250-266, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.apm.2019.05.031. Acesso em: 14 ago. 2024.
APA
Santana, H. B., Thiesen, J. L. M., Medeiros, R. de, Ferreira, A. J. M., Rodríguez Ramos, R., & Tita, V. (2019). Multiscale analysis for predicting the constitutive tensor effective coefficients of layered composites with micro and macro failures. Applied Mathematical Modelling, 75, 250-266. doi:10.1016/j.apm.2019.05.031
NLM
Santana HB, Thiesen JLM, Medeiros R de, Ferreira AJM, Rodríguez Ramos R, Tita V. Multiscale analysis for predicting the constitutive tensor effective coefficients of layered composites with micro and macro failures [Internet]. Applied Mathematical Modelling. 2019 ; 75 250-266.[citado 2024 ago. 14 ] Available from: https://doi.org/10.1016/j.apm.2019.05.031
Vancouver
Santana HB, Thiesen JLM, Medeiros R de, Ferreira AJM, Rodríguez Ramos R, Tita V. Multiscale analysis for predicting the constitutive tensor effective coefficients of layered composites with micro and macro failures [Internet]. Applied Mathematical Modelling. 2019 ; 75 250-266.[citado 2024 ago. 14 ] Available from: https://doi.org/10.1016/j.apm.2019.05.031
Tese (Doutorado)
Modeling and analysis of hyperbolic metamaterials for controlling the spontaneous emission rate and efficiency of quantum emitters (2019)
Mota, Achiles Fontana da; Borges, Ben Hur Viana (Orientador); Ottevaere, Heidi (coorient); Meulebroeck, Wendy (coorient)
Unidade: EESC
Subjects: ELETROMAGNETISMO, HOMOGENEIZAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOTA, Achiles Fontana da. Modeling and analysis of hyperbolic metamaterials for controlling the spontaneous emission rate and efficiency of quantum emitters. 2019. Tese (Doutorado) – Universidade de São Paulo, São Carlos, 2019. Disponível em: http://www.teses.usp.br/teses/disponiveis/18/18155/tde-19032019-084555/. Acesso em: 14 ago. 2024.
APA
Mota, A. F. da. (2019). Modeling and analysis of hyperbolic metamaterials for controlling the spontaneous emission rate and efficiency of quantum emitters (Tese (Doutorado). Universidade de São Paulo, São Carlos. Recuperado de http://www.teses.usp.br/teses/disponiveis/18/18155/tde-19032019-084555/
NLM
Mota AF da. Modeling and analysis of hyperbolic metamaterials for controlling the spontaneous emission rate and efficiency of quantum emitters [Internet]. 2019 ;[citado 2024 ago. 14 ] Available from: http://www.teses.usp.br/teses/disponiveis/18/18155/tde-19032019-084555/
Vancouver
Mota AF da. Modeling and analysis of hyperbolic metamaterials for controlling the spontaneous emission rate and efficiency of quantum emitters [Internet]. 2019 ;[citado 2024 ago. 14 ] Available from: http://www.teses.usp.br/teses/disponiveis/18/18155/tde-19032019-084555/
Artigo de periodico
Semianalytical modeling of arbitrarily distributed quantum emitters embedded in nanopatterned hyperbolic metamaterials (2019)
Mota, Achiles F. da; Martins, Augusto; Pepino, Vinicius; Ottevaere, Heidi; Meulebroeck, Wendy; Teixeira, Fernando L ; Borges, Ben-Hur Viana
Source: Journal of the Optical Society of America B. Unidade: EESC
Subjects: ELETROMAGNETISMO, HOMOGENEIZAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOTA, Achiles F. da et al. Semianalytical modeling of arbitrarily distributed quantum emitters embedded in nanopatterned hyperbolic metamaterials. Journal of the Optical Society of America B, v. 36, n. 5, p. 1273-1287, 2019Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/67531d99-74a5-40ef-8102-9b6fd2366710/SYSNO3177608_artigo%2009%20-%20Semianalytical%20modeling%20of%20arbitrarily%20distributed%20quantum%20emitters%20embedded%20in%20nanopatterned%20hyperbolic%20metamaterials.%20%28Journal%20of%20the%20Optical%20Society..%29.pdf. Acesso em: 14 ago. 2024.
APA
Mota, A. F. da, Martins, A., Pepino, V., Ottevaere, H., Meulebroeck, W., Teixeira, F. L., & Borges, B. -H. V. (2019). Semianalytical modeling of arbitrarily distributed quantum emitters embedded in nanopatterned hyperbolic metamaterials. Journal of the Optical Society of America B, 36( 5), 1273-1287. doi:10.1364/JOSAB.36.001273
NLM
Mota AF da, Martins A, Pepino V, Ottevaere H, Meulebroeck W, Teixeira FL, Borges B-HV. Semianalytical modeling of arbitrarily distributed quantum emitters embedded in nanopatterned hyperbolic metamaterials [Internet]. Journal of the Optical Society of America B. 2019 ; 36( 5): 1273-1287.[citado 2024 ago. 14 ] Available from: https://repositorio.usp.br/directbitstream/67531d99-74a5-40ef-8102-9b6fd2366710/SYSNO3177608_artigo%2009%20-%20Semianalytical%20modeling%20of%20arbitrarily%20distributed%20quantum%20emitters%20embedded%20in%20nanopatterned%20hyperbolic%20metamaterials.%20%28Journal%20of%20the%20Optical%20Society..%29.pdf
Vancouver
Mota AF da, Martins A, Pepino V, Ottevaere H, Meulebroeck W, Teixeira FL, Borges B-HV. Semianalytical modeling of arbitrarily distributed quantum emitters embedded in nanopatterned hyperbolic metamaterials [Internet]. Journal of the Optical Society of America B. 2019 ; 36( 5): 1273-1287.[citado 2024 ago. 14 ] Available from: https://repositorio.usp.br/directbitstream/67531d99-74a5-40ef-8102-9b6fd2366710/SYSNO3177608_artigo%2009%20-%20Semianalytical%20modeling%20of%20arbitrarily%20distributed%20quantum%20emitters%20embedded%20in%20nanopatterned%20hyperbolic%20metamaterials.%20%28Journal%20of%20the%20Optical%20Society..%29.pdf
Trabalho de evento
Effective moduli of 3-1 longitudinally porous solids with regular hexagonal array (2018)
Aguiar, Adair Roberto; Prado, Edmar B. T.; Silva, Uziel Paulo da
Source: Anais. Conference titles: Encontro Nacional de Engenharia Biomecânica - ENEBI. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, OSSO E OSSOS, HOMOGENEIZAÇÃO, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AGUIAR, Adair Roberto e PRADO, Edmar B. T. e SILVA, Uziel Paulo da. Effective moduli of 3-1 longitudinally porous solids with regular hexagonal array. 2018, Anais.. Águas de Lindóia, SP: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2018. Disponível em: https://doi.org/10.26678/ABCM.ENEBI2018.EEB18-0062. Acesso em: 14 ago. 2024.
APA
Aguiar, A. R., Prado, E. B. T., & Silva, U. P. da. (2018). Effective moduli of 3-1 longitudinally porous solids with regular hexagonal array. In Anais. Águas de Lindóia, SP: Escola de Engenharia de São Carlos, Universidade de São Paulo. doi:10.26678/ABCM.ENEBI2018.EEB18-0062
NLM
Aguiar AR, Prado EBT, Silva UP da. Effective moduli of 3-1 longitudinally porous solids with regular hexagonal array [Internet]. Anais. 2018 ;[citado 2024 ago. 14 ] Available from: https://doi.org/10.26678/ABCM.ENEBI2018.EEB18-0062
Vancouver
Aguiar AR, Prado EBT, Silva UP da. Effective moduli of 3-1 longitudinally porous solids with regular hexagonal array [Internet]. Anais. 2018 ;[citado 2024 ago. 14 ] Available from: https://doi.org/10.26678/ABCM.ENEBI2018.EEB18-0062
Artigo de periodico
Application of Mori–Tanaka method in 3–1 porous piezoelectric medium of crystal class 6 (2018)
Aguiar, Adair Roberto; Bravo Castillero, Julián; Silva, Uziel Paulo da
Source: International Journal of Engineering Science. Unidade: EESC
Subjects: PIEZOELETRICIDADE, HOMOGENEIZAÇÃO, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AGUIAR, Adair Roberto e BRAVO CASTILLERO, Julián e SILVA, Uziel Paulo da. Application of Mori–Tanaka method in 3–1 porous piezoelectric medium of crystal class 6. International Journal of Engineering Science, v. 123, p. 36-50, 2018Tradução . . Disponível em: https://doi.org/10.1016/j.ijengsci.2017.11.009. Acesso em: 14 ago. 2024.
APA
Aguiar, A. R., Bravo Castillero, J., & Silva, U. P. da. (2018). Application of Mori–Tanaka method in 3–1 porous piezoelectric medium of crystal class 6. International Journal of Engineering Science, 123, 36-50. doi:10.1016/j.ijengsci.2017.11.009
NLM
Aguiar AR, Bravo Castillero J, Silva UP da. Application of Mori–Tanaka method in 3–1 porous piezoelectric medium of crystal class 6 [Internet]. International Journal of Engineering Science. 2018 ; 123 36-50.[citado 2024 ago. 14 ] Available from: https://doi.org/10.1016/j.ijengsci.2017.11.009
Vancouver
Aguiar AR, Bravo Castillero J, Silva UP da. Application of Mori–Tanaka method in 3–1 porous piezoelectric medium of crystal class 6 [Internet]. International Journal of Engineering Science. 2018 ; 123 36-50.[citado 2024 ago. 14 ] Available from: https://doi.org/10.1016/j.ijengsci.2017.11.009
Trabalho de evento
Effective coefficients for piezoelectric composites with uniform mechanical and electrical imperfect contacts (2017)
Santana, Humberto Brito; Rodríguez Ramos, Reinaldo; López Realpozo, Juan C.; Quintero, Alejandro J.; Guinovart Diaz, Raúl; Camacho Montes, Hector; Espinosa Almeyda, Yoanh; Sabina, Federico J.; Bravo-Castillero, Julián; Ferreira, António Joaquim Mendes; Tita, Volnei
Source: Anais. Conference titles: Meeting on Aeronautical Composite Materials and Structures - MACMS 2017. Unidade: EESC
Subjects: PIEZOELETRICIDADE, MATERIAIS COMPÓSITOS, HOMOGENEIZAÇÃO, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTANA, Humberto Brito et al. Effective coefficients for piezoelectric composites with uniform mechanical and electrical imperfect contacts. 2017, Anais.. São Carlos, SP: EESC-USP, 2017. Disponível em: http://soac.eesc.usp.br/index.php/macms/macms2017/paper/view/805/527. Acesso em: 14 ago. 2024.
APA
Santana, H. B., Rodríguez Ramos, R., López Realpozo, J. C., Quintero, A. J., Guinovart Diaz, R., Camacho Montes, H., et al. (2017). Effective coefficients for piezoelectric composites with uniform mechanical and electrical imperfect contacts. In Anais. São Carlos, SP: EESC-USP. Recuperado de http://soac.eesc.usp.br/index.php/macms/macms2017/paper/view/805/527
NLM
Santana HB, Rodríguez Ramos R, López Realpozo JC, Quintero AJ, Guinovart Diaz R, Camacho Montes H, Espinosa Almeyda Y, Sabina FJ, Bravo-Castillero J, Ferreira AJM, Tita V. Effective coefficients for piezoelectric composites with uniform mechanical and electrical imperfect contacts [Internet]. Anais. 2017 ;[citado 2024 ago. 14 ] Available from: http://soac.eesc.usp.br/index.php/macms/macms2017/paper/view/805/527
Vancouver
Santana HB, Rodríguez Ramos R, López Realpozo JC, Quintero AJ, Guinovart Diaz R, Camacho Montes H, Espinosa Almeyda Y, Sabina FJ, Bravo-Castillero J, Ferreira AJM, Tita V. Effective coefficients for piezoelectric composites with uniform mechanical and electrical imperfect contacts [Internet]. Anais. 2017 ;[citado 2024 ago. 14 ] Available from: http://soac.eesc.usp.br/index.php/macms/macms2017/paper/view/805/527
Trabalho de evento
Application of Mori-Tanaka method in the evaluation of effective electroelastic moduli of porous piezoelectric medium (2017)
Aguiar, Adair Roberto; Bravo-Castillero, Julián; Silva, Uziel Paulo da
Source: Proceedings of MECSOL. Conference titles: International Symposium on Solid Mechanics - MECSOL. Unidade: EESC
Subjects: PIEZOELETRICIDADE, HOMOGENEIZAÇÃO, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AGUIAR, Adair Roberto e BRAVO-CASTILLERO, Julián e SILVA, Uziel Paulo da. Application of Mori-Tanaka method in the evaluation of effective electroelastic moduli of porous piezoelectric medium. 2017, Anais.. Joinville, SC: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2017. . Acesso em: 14 ago. 2024.
APA
Aguiar, A. R., Bravo-Castillero, J., & Silva, U. P. da. (2017). Application of Mori-Tanaka method in the evaluation of effective electroelastic moduli of porous piezoelectric medium. In Proceedings of MECSOL. Joinville, SC: Escola de Engenharia de São Carlos, Universidade de São Paulo.
NLM
Aguiar AR, Bravo-Castillero J, Silva UP da. Application of Mori-Tanaka method in the evaluation of effective electroelastic moduli of porous piezoelectric medium. Proceedings of MECSOL. 2017 ;[citado 2024 ago. 14 ]
Vancouver
Aguiar AR, Bravo-Castillero J, Silva UP da. Application of Mori-Tanaka method in the evaluation of effective electroelastic moduli of porous piezoelectric medium. Proceedings of MECSOL. 2017 ;[citado 2024 ago. 14 ]
Artigo de periodico
Analytical and numerical investigation of failure of ellipticity for a class of hyperelastic laminates (2017)
Aguiar, Adair Roberto; Pérez-Fernández, Leslie Darien; Prado, Edmar Borges Theóphilo
Source: European Journal of Mechanics A : solids. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, ELASTICIDADE DAS ESTRUTURAS, LAMINADOS, HOMOGENEIZAÇÃO, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AGUIAR, Adair Roberto e PÉREZ-FERNÁNDEZ, Leslie Darien e PRADO, Edmar Borges Theóphilo. Analytical and numerical investigation of failure of ellipticity for a class of hyperelastic laminates. European Journal of Mechanics A : solids, v. 61, n. Ja/Feb. 2017, p. 110121, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.euromechsol.2016.09.005. Acesso em: 14 ago. 2024.
APA
Aguiar, A. R., Pérez-Fernández, L. D., & Prado, E. B. T. (2017). Analytical and numerical investigation of failure of ellipticity for a class of hyperelastic laminates. European Journal of Mechanics A : solids, 61( Ja/Feb. 2017), 110121. doi:10.1016/j.euromechsol.2016.09.005
NLM
Aguiar AR, Pérez-Fernández LD, Prado EBT. Analytical and numerical investigation of failure of ellipticity for a class of hyperelastic laminates [Internet]. European Journal of Mechanics A : solids. 2017 ; 61( Ja/Feb. 2017): 110121.[citado 2024 ago. 14 ] Available from: https://doi.org/10.1016/j.euromechsol.2016.09.005
Vancouver
Aguiar AR, Pérez-Fernández LD, Prado EBT. Analytical and numerical investigation of failure of ellipticity for a class of hyperelastic laminates [Internet]. European Journal of Mechanics A : solids. 2017 ; 61( Ja/Feb. 2017): 110121.[citado 2024 ago. 14 ] Available from: https://doi.org/10.1016/j.euromechsol.2016.09.005
Parte de monografia/livro
Modeling of smart piezoelectric sensors: determining effective properties with international bonding conditions (2017)
Medeiros, Ricardo de; Santana, Humberto Brito; Rodríguez Ramos, Reinaldo; Bravo-Castillero, Julián; Guinovart Díaz, Raúl; Tita, Volnei
Source: Material Modelling: applications, challenges and researches. Unidade: EESC
Subjects: PIEZOELETRICIDADE, MÉTODO DOS ELEMENTOS FINITOS, MATERIAIS COMPÓSITOS, HOMOGENEIZAÇÃO, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MEDEIROS, Ricardo de et al. Modeling of smart piezoelectric sensors: determining effective properties with international bonding conditions. Material Modelling: applications, challenges and researches. Tradução . Hauppauge, NY, USA: Nova Publisher, 2017. v. 1. . . Acesso em: 14 ago. 2024.
APA
Medeiros, R. de, Santana, H. B., Rodríguez Ramos, R., Bravo-Castillero, J., Guinovart Díaz, R., & Tita, V. (2017). Modeling of smart piezoelectric sensors: determining effective properties with international bonding conditions. In Material Modelling: applications, challenges and researches (Vol. 1). Hauppauge, NY, USA: Nova Publisher.
NLM
Medeiros R de, Santana HB, Rodríguez Ramos R, Bravo-Castillero J, Guinovart Díaz R, Tita V. Modeling of smart piezoelectric sensors: determining effective properties with international bonding conditions. In: Material Modelling: applications, challenges and researches. Hauppauge, NY, USA: Nova Publisher; 2017. [citado 2024 ago. 14 ]
Vancouver
Medeiros R de, Santana HB, Rodríguez Ramos R, Bravo-Castillero J, Guinovart Díaz R, Tita V. Modeling of smart piezoelectric sensors: determining effective properties with international bonding conditions. In: Material Modelling: applications, challenges and researches. Hauppauge, NY, USA: Nova Publisher; 2017. [citado 2024 ago. 14 ]

USP Schools

ReP

Filtros

Departament

Authors

USP affiliated authors

Date published

Subjects

Source title

Publisher

Conference titles

Countries/Territories

Funding Agencies

Indexado em

Non normalized affiliation

Countries of institutions of collaboration