Menu

Filtros : "Proceedings: Geospatial Data and Geographical Information Science" "Reino Unido" Removido: "2018" Limpar

Filtros

Refine with date range

1 - 20 (497 records)

  • Trabalho de evento

    Mitigating dynamic stall with a movable leading-edge: the NACA0012-IK30 wing (2024)

    Camacho, Emanuel A. R.; Silva, Andre R. R; Marques, Flavio Donizeti

    Source: Proceedings. Conference titles: Congress of the International Council of the Aeronautical Sciences - ICAS. Unidade: EESC

    Subjects: ROTOR, ASAS DE AERONAVES, PROPULSÃO, AERODINÂMICA DE AERONAVES, ENGENHARIA MECÂNICA

    PrivadoHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      CAMACHO, Emanuel A. R. e SILVA, Andre R. R e MARQUES, Flavio Donizeti. Mitigating dynamic stall with a movable leading-edge: the NACA0012-IK30 wing. 2024, Anais.. Edinburgh, UK: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2024. Disponível em: https://repositorio.usp.br/directbitstream/8eedf42a-b8a2-445f-9ead-f598734f1a02/icas2024_0595_paper.pdf. Acesso em: 08 dez. 2025.

    • APA

      Camacho, E. A. R., Silva, A. R. R., & Marques, F. D. (2024). Mitigating dynamic stall with a movable leading-edge: the NACA0012-IK30 wing. In Proceedings. Edinburgh, UK: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/8eedf42a-b8a2-445f-9ead-f598734f1a02/icas2024_0595_paper.pdf

    • NLM

      Camacho EAR, Silva ARR, Marques FD. Mitigating dynamic stall with a movable leading-edge: the NACA0012-IK30 wing [Internet]. Proceedings. 2024 ;[citado 2025 dez. 08 ] Available from: https://repositorio.usp.br/directbitstream/8eedf42a-b8a2-445f-9ead-f598734f1a02/icas2024_0595_paper.pdf

    • Vancouver

      Camacho EAR, Silva ARR, Marques FD. Mitigating dynamic stall with a movable leading-edge: the NACA0012-IK30 wing [Internet]. Proceedings. 2024 ;[citado 2025 dez. 08 ] Available from: https://repositorio.usp.br/directbitstream/8eedf42a-b8a2-445f-9ead-f598734f1a02/icas2024_0595_paper.pdf

  • Trabalho de evento

    Probabilistic inspection planning for the life cycle management of railway bridges (2024)

    Ames, Isabela; Bittencourt, Túlio Nogueira ; Futai, Marcos Massao ; Beck, André Teófilo ; Carvalho, H.

    Source: Proceedings. Conference titles: International Conference on Bridge Maintenance, Safety and Management - IABMAS. Unidades: EESC, EP

    Assunto: ESTRUTURAS

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      AMES, Isabela et al. Probabilistic inspection planning for the life cycle management of railway bridges. 2024, Anais.. London, UK: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2024. Disponível em: http://dx.doi.org/10.1201/9781003483755-332. Acesso em: 08 dez. 2025.

    • APA

      Ames, I., Bittencourt, T. N., Futai, M. M., Beck, A. T., & Carvalho, H. (2024). Probabilistic inspection planning for the life cycle management of railway bridges. In Proceedings. London, UK: Escola de Engenharia de São Carlos, Universidade de São Paulo. doi:10.1201/9781003483755-332

    • NLM

      Ames I, Bittencourt TN, Futai MM, Beck AT, Carvalho H. Probabilistic inspection planning for the life cycle management of railway bridges [Internet]. Proceedings. 2024 ;[citado 2025 dez. 08 ] Available from: http://dx.doi.org/10.1201/9781003483755-332

    • Vancouver

      Ames I, Bittencourt TN, Futai MM, Beck AT, Carvalho H. Probabilistic inspection planning for the life cycle management of railway bridges [Internet]. Proceedings. 2024 ;[citado 2025 dez. 08 ] Available from: http://dx.doi.org/10.1201/9781003483755-332

  • Trabalho de evento-resumo

    Development of risk-management approach in additive manufacturing of orthopedic implants (2024)

    Lirio, Adriana Cogo Malgueiro ; Pinto, Terezinha de Jesus Andreoli

    Source: Proceedings. Conference titles: World Congress on Recent Advances in Nanotechnology/RAN. Unidade: FCF

    Subjects: MANUFATURA ADITIVA, ORTOPEDIA

    PrivadoAcesso à fonteHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      LIRIO, Adriana Cogo Malgueiro e PINTO, Terezinha de Jesus Andreoli. Development of risk-management approach in additive manufacturing of orthopedic implants. 2024, Anais.. London: International Aset Inc., 2024. Disponível em: https://avestia.com/RAN2024_Proceedings/files/RAN24_Proceedings.pdf. Acesso em: 08 dez. 2025.

    • APA

      Lirio, A. C. M., & Pinto, T. de J. A. (2024). Development of risk-management approach in additive manufacturing of orthopedic implants. In Proceedings. London: International Aset Inc. Recuperado de https://avestia.com/RAN2024_Proceedings/files/RAN24_Proceedings.pdf

    • NLM

      Lirio ACM, Pinto T de JA. Development of risk-management approach in additive manufacturing of orthopedic implants [Internet]. Proceedings. 2024 ;[citado 2025 dez. 08 ] Available from: https://avestia.com/RAN2024_Proceedings/files/RAN24_Proceedings.pdf

    • Vancouver

      Lirio ACM, Pinto T de JA. Development of risk-management approach in additive manufacturing of orthopedic implants [Internet]. Proceedings. 2024 ;[citado 2025 dez. 08 ] Available from: https://avestia.com/RAN2024_Proceedings/files/RAN24_Proceedings.pdf

  • Trabalho de evento

    A comparison of methods for oil production forecasting of the Santos basin (2024)

    Bezerra, Herlisson Maciel ; Messis, Luis F. B; Russo, Cibele Maria ; Peron, Thomas

    Source: Proceedings. Conference titles: International Workshop on Statistical Modelling - IWSM. Unidades: ICMC, Interinstitucional de Pós-Graduação em Estatística

    Subjects: PETRÓLEO, PREVISÃO (ANÁLISE DE SÉRIES TEMPORAIS), ESTATÍSTICA APLICADA

    PrivadoAcesso à fonteHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      BEZERRA, Herlisson Maciel et al. A comparison of methods for oil production forecasting of the Santos basin. 2024, Anais.. Durham: Durham University, 2024. Disponível em: https://maths.dur.ac.uk/iwsm2024/. Acesso em: 08 dez. 2025.

    • APA

      Bezerra, H. M., Messis, L. F. B., Russo, C. M., & Peron, T. (2024). A comparison of methods for oil production forecasting of the Santos basin. In Proceedings. Durham: Durham University. Recuperado de https://maths.dur.ac.uk/iwsm2024/

    • NLM

      Bezerra HM, Messis LFB, Russo CM, Peron T. A comparison of methods for oil production forecasting of the Santos basin [Internet]. Proceedings. 2024 ;[citado 2025 dez. 08 ] Available from: https://maths.dur.ac.uk/iwsm2024/

    • Vancouver

      Bezerra HM, Messis LFB, Russo CM, Peron T. A comparison of methods for oil production forecasting of the Santos basin [Internet]. Proceedings. 2024 ;[citado 2025 dez. 08 ] Available from: https://maths.dur.ac.uk/iwsm2024/

  • Trabalho de evento

    Surface texture on micromilling of a Ti6Al4V alloy for biomedical implants (2023)

    Assis, Cleiton Lazaro Fazolo de; Mecelis, Guilherme Rosati; Silva, Eraldo Jannone da ; Rodrigues, Alessandro Roger ; Coelho, Reginaldo Teixeira

    Source: Proceedings. Conference titles: International Conference & Exhibition. Unidade: EESC

    Subjects: AÇO BAIXO CARBONO, USINAGEM, ENGENHARIA MECÂNICA

    PrivadoHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      ASSIS, Cleiton Lazaro Fazolo de et al. Surface texture on micromilling of a Ti6Al4V alloy for biomedical implants. 2023, Anais.. Cranfield, United Kingdom: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2023. Disponível em: https://repositorio.usp.br/directbitstream/059fe8ac-fa11-496a-9c17-d3b125dfb3ea/PROD_26619_SYSNO_3167830.pdf. Acesso em: 08 dez. 2025.

    • APA

      Assis, C. L. F. de, Mecelis, G. R., Silva, E. J. da, Rodrigues, A. R., & Coelho, R. T. (2023). Surface texture on micromilling of a Ti6Al4V alloy for biomedical implants. In Proceedings. Cranfield, United Kingdom: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/059fe8ac-fa11-496a-9c17-d3b125dfb3ea/PROD_26619_SYSNO_3167830.pdf

    • NLM

      Assis CLF de, Mecelis GR, Silva EJ da, Rodrigues AR, Coelho RT. Surface texture on micromilling of a Ti6Al4V alloy for biomedical implants [Internet]. Proceedings. 2023 ;[citado 2025 dez. 08 ] Available from: https://repositorio.usp.br/directbitstream/059fe8ac-fa11-496a-9c17-d3b125dfb3ea/PROD_26619_SYSNO_3167830.pdf

    • Vancouver

      Assis CLF de, Mecelis GR, Silva EJ da, Rodrigues AR, Coelho RT. Surface texture on micromilling of a Ti6Al4V alloy for biomedical implants [Internet]. Proceedings. 2023 ;[citado 2025 dez. 08 ] Available from: https://repositorio.usp.br/directbitstream/059fe8ac-fa11-496a-9c17-d3b125dfb3ea/PROD_26619_SYSNO_3167830.pdf

  • Trabalho de evento-resumo

    Effect of post-mortem interval and body temperature on tissue susceptibility (2022)

    Otsuka, Fábio Seiji ; Chaim, Khallil Taverna; Otaduy, Maria Concepción García; Salmon, Carlos Ernesto Garrido

    Source: Proceedings. Conference titles: Joint Annual Meeting ISMRM-ESMRMB. Unidades: FM, FFCLRP

    Subjects: TEMPERATURA CORPORAL, MORTE

    PrivadoAcesso à fonteHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      OTSUKA, Fábio Seiji et al. Effect of post-mortem interval and body temperature on tissue susceptibility. 2022, Anais.. Concord: International Society for Magnetic Resonance in Medicine - ISMRM, 2022. Disponível em: https://archive.ismrm.org/2022/1532.html. Acesso em: 08 dez. 2025.

    • APA

      Otsuka, F. S., Chaim, K. T., Otaduy, M. C. G., & Salmon, C. E. G. (2022). Effect of post-mortem interval and body temperature on tissue susceptibility. In Proceedings. Concord: International Society for Magnetic Resonance in Medicine - ISMRM. Recuperado de https://archive.ismrm.org/2022/1532.html

    • NLM

      Otsuka FS, Chaim KT, Otaduy MCG, Salmon CEG. Effect of post-mortem interval and body temperature on tissue susceptibility [Internet]. Proceedings. 2022 ;[citado 2025 dez. 08 ] Available from: https://archive.ismrm.org/2022/1532.html

    • Vancouver

      Otsuka FS, Chaim KT, Otaduy MCG, Salmon CEG. Effect of post-mortem interval and body temperature on tissue susceptibility [Internet]. Proceedings. 2022 ;[citado 2025 dez. 08 ] Available from: https://archive.ismrm.org/2022/1532.html

  • Trabalho de evento

    Micro-endmilling of Fresnel structure on RSA 6061-T6 and PMMA (2021)

    Demarchi, Enrico Ferro; Dib, Marcel Henrique Militão; Jasinevicius, Renato Goulart

    Source: Proceedings. Conference titles: International Conference & Exhibition. Unidade: EESC

    Subjects: USINAGEM, MATERIAIS ÓPTICOS, ENGENHARIA MECÂNICA

    PrivadoHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      DEMARCHI, Enrico Ferro e DIB, Marcel Henrique Militão e JASINEVICIUS, Renato Goulart. Micro-endmilling of Fresnel structure on RSA 6061-T6 and PMMA. 2021, Anais.. Cranfield, United Kingdom: EUSPEN, 2021. Disponível em: https://repositorio.usp.br/directbitstream/e8921d0f-401f-4413-b666-090ae7897e34/OK___trabalho%2001%20-%20Micro-endmilling%20of%20Fresnel%20structure%20on%20RSA%206061-T6%20and%20PMMA.pdf. Acesso em: 08 dez. 2025.

    • APA

      Demarchi, E. F., Dib, M. H. M., & Jasinevicius, R. G. (2021). Micro-endmilling of Fresnel structure on RSA 6061-T6 and PMMA. In Proceedings. Cranfield, United Kingdom: EUSPEN. Recuperado de https://repositorio.usp.br/directbitstream/e8921d0f-401f-4413-b666-090ae7897e34/OK___trabalho%2001%20-%20Micro-endmilling%20of%20Fresnel%20structure%20on%20RSA%206061-T6%20and%20PMMA.pdf

    • NLM

      Demarchi EF, Dib MHM, Jasinevicius RG. Micro-endmilling of Fresnel structure on RSA 6061-T6 and PMMA [Internet]. Proceedings. 2021 ;[citado 2025 dez. 08 ] Available from: https://repositorio.usp.br/directbitstream/e8921d0f-401f-4413-b666-090ae7897e34/OK___trabalho%2001%20-%20Micro-endmilling%20of%20Fresnel%20structure%20on%20RSA%206061-T6%20and%20PMMA.pdf

    • Vancouver

      Demarchi EF, Dib MHM, Jasinevicius RG. Micro-endmilling of Fresnel structure on RSA 6061-T6 and PMMA [Internet]. Proceedings. 2021 ;[citado 2025 dez. 08 ] Available from: https://repositorio.usp.br/directbitstream/e8921d0f-401f-4413-b666-090ae7897e34/OK___trabalho%2001%20-%20Micro-endmilling%20of%20Fresnel%20structure%20on%20RSA%206061-T6%20and%20PMMA.pdf

  • Trabalho de evento

    Cyclic loading of helical pile as anchor for floating windturbines: centrifuge tests (2020)

    Thorel, Luc; El Haffar, Ismat; Maatouk, Semaan; Schiavon, José Antonio; Tsuha, Cristina de Hollanda Cavalcanti

    Source: Proceedings. Conference titles: International Symposium on Frontiers in Offshore Geotechnics - ISFOG. Unidade: EESC

    Subjects: ESTACAS, ANCORAGEM, GEOTECNIA

    PrivadoHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      THOREL, Luc et al. Cyclic loading of helical pile as anchor for floating windturbines: centrifuge tests. 2020, Anais.. London, United Kingdom: SIMSG, 2020. Disponível em: https://repositorio.usp.br/directbitstream/ed5eb0b7-2f53-4c28-b41c-03610c5f673a/trabalho%2006%20-%20CYCLIC%20LOADING%20OF%20HELICAL%20PILE%20AS%20ANCHOR%20FOR%20FLOATING%28..%29%20%28Fourth%20International%20Symposium%20on%20Frontiers%20in%20Offshore%20Geotechnics%2C%20ISFOG%202020%29.pdf. Acesso em: 08 dez. 2025.

    • APA

      Thorel, L., El Haffar, I., Maatouk, S., Schiavon, J. A., & Tsuha, C. de H. C. (2020). Cyclic loading of helical pile as anchor for floating windturbines: centrifuge tests. In Proceedings. London, United Kingdom: SIMSG. Recuperado de https://repositorio.usp.br/directbitstream/ed5eb0b7-2f53-4c28-b41c-03610c5f673a/trabalho%2006%20-%20CYCLIC%20LOADING%20OF%20HELICAL%20PILE%20AS%20ANCHOR%20FOR%20FLOATING%28..%29%20%28Fourth%20International%20Symposium%20on%20Frontiers%20in%20Offshore%20Geotechnics%2C%20ISFOG%202020%29.pdf

    • NLM

      Thorel L, El Haffar I, Maatouk S, Schiavon JA, Tsuha C de HC. Cyclic loading of helical pile as anchor for floating windturbines: centrifuge tests [Internet]. Proceedings. 2020 ;[citado 2025 dez. 08 ] Available from: https://repositorio.usp.br/directbitstream/ed5eb0b7-2f53-4c28-b41c-03610c5f673a/trabalho%2006%20-%20CYCLIC%20LOADING%20OF%20HELICAL%20PILE%20AS%20ANCHOR%20FOR%20FLOATING%28..%29%20%28Fourth%20International%20Symposium%20on%20Frontiers%20in%20Offshore%20Geotechnics%2C%20ISFOG%202020%29.pdf

    • Vancouver

      Thorel L, El Haffar I, Maatouk S, Schiavon JA, Tsuha C de HC. Cyclic loading of helical pile as anchor for floating windturbines: centrifuge tests [Internet]. Proceedings. 2020 ;[citado 2025 dez. 08 ] Available from: https://repositorio.usp.br/directbitstream/ed5eb0b7-2f53-4c28-b41c-03610c5f673a/trabalho%2006%20-%20CYCLIC%20LOADING%20OF%20HELICAL%20PILE%20AS%20ANCHOR%20FOR%20FLOATING%28..%29%20%28Fourth%20International%20Symposium%20on%20Frontiers%20in%20Offshore%20Geotechnics%2C%20ISFOG%202020%29.pdf

  • Trabalho de evento

    Value proposition of product-service systems: an experimental study to compare two different design approaches (2020)

    Fernandes, Sânia da Costa; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C; Rozenfeld, Henrique

    Source: Proceedings. Conference titles: International Conference Design - DESIGN 2020. Unidade: EESC

    Subjects: SISTEMA PRODUTO-SERVIÇO (PSS), ENGENHARIA DE PRODUÇÃO, MODELO DE NEGÓCIO

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      FERNANDES, Sânia da Costa et al. Value proposition of product-service systems: an experimental study to compare two different design approaches. 2020, Anais.. Glasgow, United Kingdom: The Design Society, 2020. Disponível em: https://doi.org/10.1017/dsd.2020.84. Acesso em: 08 dez. 2025.

    • APA

      Fernandes, S. da C., Pigosso, D. C. A., McAloone, T. C., & Rozenfeld, H. (2020). Value proposition of product-service systems: an experimental study to compare two different design approaches. In Proceedings. Glasgow, United Kingdom: The Design Society. doi:10.1017/dsd.2020.84

    • NLM

      Fernandes S da C, Pigosso DCA, McAloone TC, Rozenfeld H. Value proposition of product-service systems: an experimental study to compare two different design approaches [Internet]. Proceedings. 2020 ;[citado 2025 dez. 08 ] Available from: https://doi.org/10.1017/dsd.2020.84

    • Vancouver

      Fernandes S da C, Pigosso DCA, McAloone TC, Rozenfeld H. Value proposition of product-service systems: an experimental study to compare two different design approaches [Internet]. Proceedings. 2020 ;[citado 2025 dez. 08 ] Available from: https://doi.org/10.1017/dsd.2020.84

  • Trabalho de evento

    Theoretical analysis of a sensor for evaluation of liquid film thickness of annular flows in microscale channels (2020)

    Baptistella, Victor Eduardo Corte; Nascimento Junior, Valter Salles do; Ribatski, Gherhardt

    Source: Proceedings. Conference titles: Micro and Nano Flows Conference. Unidade: EESC

    Subjects: TRANSFERÊNCIA DE CALOR, ESCOAMENTO BIFÁSICO, ENGENHARIA MECÂNICA

    PrivadoHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      BAPTISTELLA, Victor Eduardo Corte e NASCIMENTO JUNIOR, Valter Salles do e RIBATSKI, Gherhardt. Theoretical analysis of a sensor for evaluation of liquid film thickness of annular flows in microscale channels. 2020, Anais.. London, UK: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2020. Disponível em: https://repositorio.usp.br/directbitstream/ff546538-b421-415b-bf5b-752c9d4ca3d2/PROD_26258_SYSNO_3153050.pdf. Acesso em: 08 dez. 2025.

    • APA

      Baptistella, V. E. C., Nascimento Junior, V. S. do, & Ribatski, G. (2020). Theoretical analysis of a sensor for evaluation of liquid film thickness of annular flows in microscale channels. In Proceedings. London, UK: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/ff546538-b421-415b-bf5b-752c9d4ca3d2/PROD_26258_SYSNO_3153050.pdf

    • NLM

      Baptistella VEC, Nascimento Junior VS do, Ribatski G. Theoretical analysis of a sensor for evaluation of liquid film thickness of annular flows in microscale channels [Internet]. Proceedings. 2020 ;[citado 2025 dez. 08 ] Available from: https://repositorio.usp.br/directbitstream/ff546538-b421-415b-bf5b-752c9d4ca3d2/PROD_26258_SYSNO_3153050.pdf

    • Vancouver

      Baptistella VEC, Nascimento Junior VS do, Ribatski G. Theoretical analysis of a sensor for evaluation of liquid film thickness of annular flows in microscale channels [Internet]. Proceedings. 2020 ;[citado 2025 dez. 08 ] Available from: https://repositorio.usp.br/directbitstream/ff546538-b421-415b-bf5b-752c9d4ca3d2/PROD_26258_SYSNO_3153050.pdf

  • Trabalho de evento

    Influence of tool neck length on tool deflections during micromilling of an ultrafine grained low-carbon steel (2019)

    Assis, Cleiton Lazaro Fazolo de; Jasinevicius, Renato Goulart

    Source: Proceedings. Conference titles: International Conference & Exhibition. Unidade: EESC

    Subjects: AÇO BAIXO CARBONO, USINAGEM, ENGENHARIA MECÂNICA

    PrivadoHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      ASSIS, Cleiton Lazaro Fazolo de e JASINEVICIUS, Renato Goulart. Influence of tool neck length on tool deflections during micromilling of an ultrafine grained low-carbon steel. 2019, Anais.. Cranfield, United Kingdom: EUSPEN, 2019. Disponível em: https://repositorio.usp.br/directbitstream/49b706d7-3ccd-42c0-95df-1254cdc32f9c/OK___resumo%2001%20-%20Influence%20of%20tool%20neck%20length%20on%20tool%20deflections%20during%20micromilling%20of%20an%20ultrafine%20grained%20low-carbon%20steel.%20%2819th%20International%20Conf%29%20%281%29.pdf. Acesso em: 08 dez. 2025.

    • APA

      Assis, C. L. F. de, & Jasinevicius, R. G. (2019). Influence of tool neck length on tool deflections during micromilling of an ultrafine grained low-carbon steel. In Proceedings. Cranfield, United Kingdom: EUSPEN. Recuperado de https://repositorio.usp.br/directbitstream/49b706d7-3ccd-42c0-95df-1254cdc32f9c/OK___resumo%2001%20-%20Influence%20of%20tool%20neck%20length%20on%20tool%20deflections%20during%20micromilling%20of%20an%20ultrafine%20grained%20low-carbon%20steel.%20%2819th%20International%20Conf%29%20%281%29.pdf

    • NLM

      Assis CLF de, Jasinevicius RG. Influence of tool neck length on tool deflections during micromilling of an ultrafine grained low-carbon steel [Internet]. Proceedings. 2019 ;[citado 2025 dez. 08 ] Available from: https://repositorio.usp.br/directbitstream/49b706d7-3ccd-42c0-95df-1254cdc32f9c/OK___resumo%2001%20-%20Influence%20of%20tool%20neck%20length%20on%20tool%20deflections%20during%20micromilling%20of%20an%20ultrafine%20grained%20low-carbon%20steel.%20%2819th%20International%20Conf%29%20%281%29.pdf

    • Vancouver

      Assis CLF de, Jasinevicius RG. Influence of tool neck length on tool deflections during micromilling of an ultrafine grained low-carbon steel [Internet]. Proceedings. 2019 ;[citado 2025 dez. 08 ] Available from: https://repositorio.usp.br/directbitstream/49b706d7-3ccd-42c0-95df-1254cdc32f9c/OK___resumo%2001%20-%20Influence%20of%20tool%20neck%20length%20on%20tool%20deflections%20during%20micromilling%20of%20an%20ultrafine%20grained%20low-carbon%20steel.%20%2819th%20International%20Conf%29%20%281%29.pdf

  • Trabalho de evento

    The role of eco-innovations on the companies social performance (2019)

    Tumelero, Cleonir; Sbragia, Roberto ; Borini, Felipe Mendes

    Source: Proceedings. Conference titles: ISPIM Innovation Conference. Unidade: FEA

    Subjects: COOPERAÇÃO, PESQUISA, DESENVOLVIMENTO SUSTENTÁVEL, RESPONSABILIDADE SOCIAL

    How to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      TUMELERO, Cleonir e SBRAGIA, Roberto e BORINI, Felipe Mendes. The role of eco-innovations on the companies social performance. 2019, Anais.. Manchester: ISPIM, 2019. . Acesso em: 08 dez. 2025.

    • APA

      Tumelero, C., Sbragia, R., & Borini, F. M. (2019). The role of eco-innovations on the companies social performance. In Proceedings. Manchester: ISPIM.

    • NLM

      Tumelero C, Sbragia R, Borini FM. The role of eco-innovations on the companies social performance. Proceedings. 2019 ;[citado 2025 dez. 08 ]

    • Vancouver

      Tumelero C, Sbragia R, Borini FM. The role of eco-innovations on the companies social performance. Proceedings. 2019 ;[citado 2025 dez. 08 ]

  • Trabalho de evento

    Trends in BIM and IoT for reactive maintenance (2019)

    Fialho, Beatriz Campos; Codinhoto, Ricardo ; Fabricio, Márcio Minto

    Source: Proceedings. Conference titles: CIB W78 2019 Conference - ICT in Design, Construction and Management in Architecture, Engineering, Construction and Operations (AECO). Unidade: IAU

    Assunto: MODELOS DE APRENDIZAGEM

    How to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      FIALHO, Beatriz Campos e CODINHOTO, Ricardo e FABRICIO, Márcio Minto. Trends in BIM and IoT for reactive maintenance. 2019, Anais.. New Casttle: Northumbria University, 2019. . Acesso em: 08 dez. 2025.

    • APA

      Fialho, B. C., Codinhoto, R., & Fabricio, M. M. (2019). Trends in BIM and IoT for reactive maintenance. In Proceedings. New Casttle: Northumbria University.

    • NLM

      Fialho BC, Codinhoto R, Fabricio MM. Trends in BIM and IoT for reactive maintenance. Proceedings. 2019 ;[citado 2025 dez. 08 ]

    • Vancouver

      Fialho BC, Codinhoto R, Fabricio MM. Trends in BIM and IoT for reactive maintenance. Proceedings. 2019 ;[citado 2025 dez. 08 ]

  • Trabalho de evento-resumo

    The impact of dataset modifications on music similarity measures (2019)

    Bodo, Roberto Piassi Passos ; Benetos, Emmanouil ; Queiroz, Marcelo Gomes de

    Source: Proceedings. Conference titles: Digital Music Research Network Workshop - DMRN+14. Unidade: IME

    Assunto: COMPUTAÇÃO MUSICAL

    Versão PublicadaAcesso à fonteHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      BODO, Roberto Piassi Passos e BENETOS, Emmanouil e QUEIROZ, Marcelo Gomes de. The impact of dataset modifications on music similarity measures. 2019, Anais.. London: Centre for Digital Music, 2019. Disponível em: https://qmro.qmul.ac.uk/xmlui/handle/123456789/61898. Acesso em: 08 dez. 2025.

    • APA

      Bodo, R. P. P., Benetos, E., & Queiroz, M. G. de. (2019). The impact of dataset modifications on music similarity measures. In Proceedings. London: Centre for Digital Music. Recuperado de https://qmro.qmul.ac.uk/xmlui/handle/123456789/61898

    • NLM

      Bodo RPP, Benetos E, Queiroz MG de. The impact of dataset modifications on music similarity measures [Internet]. Proceedings. 2019 ;[citado 2025 dez. 08 ] Available from: https://qmro.qmul.ac.uk/xmlui/handle/123456789/61898

    • Vancouver

      Bodo RPP, Benetos E, Queiroz MG de. The impact of dataset modifications on music similarity measures [Internet]. Proceedings. 2019 ;[citado 2025 dez. 08 ] Available from: https://qmro.qmul.ac.uk/xmlui/handle/123456789/61898

  • Trabalho de evento-resumo

    Functionalized mesoporous MCM-48 silica nanoparticles for adsorption of polynuclear aromatic hydrocarbons (2017)

    Garcia, Daniel; Nogueira, Helton Pereira; Chida, Alexandre Yocikazu; Araki, Koiti

    Source: Proceedings. Conference titles: World Chemistry Congress. Unidade: IQ

    Subjects: NANOPARTÍCULAS, ADSORÇÃO, HIDROCARBONOS AROMÁTICOS

    Acesso à fonteHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      GARCIA, Daniel et al. Functionalized mesoporous MCM-48 silica nanoparticles for adsorption of polynuclear aromatic hydrocarbons. 2017, Anais.. Durham: International Union of Pure and Applied Chemistry (IUPAC), 2017. Disponível em: http://www.neopixdmi.com.br/@mci/iupac2017/. Acesso em: 08 dez. 2025.

    • APA

      Garcia, D., Nogueira, H. P., Chida, A. Y., & Araki, K. (2017). Functionalized mesoporous MCM-48 silica nanoparticles for adsorption of polynuclear aromatic hydrocarbons. In Proceedings. Durham: International Union of Pure and Applied Chemistry (IUPAC). Recuperado de http://www.neopixdmi.com.br/@mci/iupac2017/

    • NLM

      Garcia D, Nogueira HP, Chida AY, Araki K. Functionalized mesoporous MCM-48 silica nanoparticles for adsorption of polynuclear aromatic hydrocarbons [Internet]. Proceedings. 2017 ;[citado 2025 dez. 08 ] Available from: http://www.neopixdmi.com.br/@mci/iupac2017/

    • Vancouver

      Garcia D, Nogueira HP, Chida AY, Araki K. Functionalized mesoporous MCM-48 silica nanoparticles for adsorption of polynuclear aromatic hydrocarbons [Internet]. Proceedings. 2017 ;[citado 2025 dez. 08 ] Available from: http://www.neopixdmi.com.br/@mci/iupac2017/

  • Trabalho de evento-resumo

    Gelation study of extracellular matrix digestion products for tissue engineering (2017)

    Lobato, Gabriela Matheus Monteiro; Burrows, Mariana Carvalho; Catalani, Luiz Henrique

    Source: Proceedings. Conference titles: World Chemistry Congress. Unidade: IQ

    Subjects: MATRIZ EXTRACELULAR, REGENERAÇÃO (FENÔMENOS BIOLÓGICOS), ENZIMAS

    Acesso à fonteHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      LOBATO, Gabriela Matheus Monteiro e BURROWS, Mariana Carvalho e CATALANI, Luiz Henrique. Gelation study of extracellular matrix digestion products for tissue engineering. 2017, Anais.. Durham: International Union of Pure and Applied Chemistry (IUPAC), 2017. Disponível em: http://www.neopixdmi.com.br/@mci/iupac2017/. Acesso em: 08 dez. 2025.

    • APA

      Lobato, G. M. M., Burrows, M. C., & Catalani, L. H. (2017). Gelation study of extracellular matrix digestion products for tissue engineering. In Proceedings. Durham: International Union of Pure and Applied Chemistry (IUPAC). Recuperado de http://www.neopixdmi.com.br/@mci/iupac2017/

    • NLM

      Lobato GMM, Burrows MC, Catalani LH. Gelation study of extracellular matrix digestion products for tissue engineering [Internet]. Proceedings. 2017 ;[citado 2025 dez. 08 ] Available from: http://www.neopixdmi.com.br/@mci/iupac2017/

    • Vancouver

      Lobato GMM, Burrows MC, Catalani LH. Gelation study of extracellular matrix digestion products for tissue engineering [Internet]. Proceedings. 2017 ;[citado 2025 dez. 08 ] Available from: http://www.neopixdmi.com.br/@mci/iupac2017/

  • Trabalho de evento-resumo

    The characterization of the protective film formed on the nickel free P558 stainless steel at different media of biological interest (2017)

    Jaimes, Ruth Flavia Vera Villamil; Aeich, A; Salcedo, Walter Jaimes ; Corio, Paola

    Source: Proceedings. Conference titles: World Chemistry Congress. Unidades: EP, IQ

    Subjects: NÍQUEL, ESPECTROSCOPIA RAMAN

    Acesso à fonteHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      JAIMES, Ruth Flavia Vera Villamil et al. The characterization of the protective film formed on the nickel free P558 stainless steel at different media of biological interest. 2017, Anais.. Durham: International Union of Pure and Applied Chemistry (IUPAC), 2017. Disponível em: http://www.neopixdmi.com.br/@mci/iupac2017/. Acesso em: 08 dez. 2025.

    • APA

      Jaimes, R. F. V. V., Aeich, A., Salcedo, W. J., & Corio, P. (2017). The characterization of the protective film formed on the nickel free P558 stainless steel at different media of biological interest. In Proceedings. Durham: International Union of Pure and Applied Chemistry (IUPAC). Recuperado de http://www.neopixdmi.com.br/@mci/iupac2017/

    • NLM

      Jaimes RFVV, Aeich A, Salcedo WJ, Corio P. The characterization of the protective film formed on the nickel free P558 stainless steel at different media of biological interest [Internet]. Proceedings. 2017 ;[citado 2025 dez. 08 ] Available from: http://www.neopixdmi.com.br/@mci/iupac2017/

    • Vancouver

      Jaimes RFVV, Aeich A, Salcedo WJ, Corio P. The characterization of the protective film formed on the nickel free P558 stainless steel at different media of biological interest [Internet]. Proceedings. 2017 ;[citado 2025 dez. 08 ] Available from: http://www.neopixdmi.com.br/@mci/iupac2017/

  • Trabalho de evento-resumo

    A chemical model for the mutually exclusive occurence of anthocyanins and betalains in plants (2017)

    Pagano, Ana Paula Eskildsen; Machado, C. O; Silva, C. P; Quina, Frank Herbert ; Bastos, Erick Leite

    Source: Proceedings. Conference titles: World Chemistry Congress. Unidade: IQ

    Subjects: PIGMENTOS, FLUORESCÊNCIA

    Acesso à fonteHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      PAGANO, Ana Paula Eskildsen et al. A chemical model for the mutually exclusive occurence of anthocyanins and betalains in plants. 2017, Anais.. Durham: International Union of Pure and Applied Chemistry (IUPAC), 2017. Disponível em: http://www.neopixdmi.com.br/@mci/iupac2017/. Acesso em: 08 dez. 2025.

    • APA

      Pagano, A. P. E., Machado, C. O., Silva, C. P., Quina, F. H., & Bastos, E. L. (2017). A chemical model for the mutually exclusive occurence of anthocyanins and betalains in plants. In Proceedings. Durham: International Union of Pure and Applied Chemistry (IUPAC). Recuperado de http://www.neopixdmi.com.br/@mci/iupac2017/

    • NLM

      Pagano APE, Machado CO, Silva CP, Quina FH, Bastos EL. A chemical model for the mutually exclusive occurence of anthocyanins and betalains in plants [Internet]. Proceedings. 2017 ;[citado 2025 dez. 08 ] Available from: http://www.neopixdmi.com.br/@mci/iupac2017/

    • Vancouver

      Pagano APE, Machado CO, Silva CP, Quina FH, Bastos EL. A chemical model for the mutually exclusive occurence of anthocyanins and betalains in plants [Internet]. Proceedings. 2017 ;[citado 2025 dez. 08 ] Available from: http://www.neopixdmi.com.br/@mci/iupac2017/

  • Trabalho de evento-resumo

    Electrophilic alkynylation using hypervalent iodine reagents (2017)

    Teodoro, Bruno Vinicius Motta; Silva Junior, Luiz Fernando da

    Source: Proceedings. Conference titles: World Chemistry Congress. Unidade: IQ

    Subjects: REAGENTES ORGÂNICOS, QUÍMICA ORGÂNICA

    Acesso à fonteHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      TEODORO, Bruno Vinicius Motta e SILVA JUNIOR, Luiz Fernando da. Electrophilic alkynylation using hypervalent iodine reagents. 2017, Anais.. Durham: International Union of Pure and Applied Chemistry (IUPAC), 2017. Disponível em: http://www.neopixdmi.com.br/@mci/iupac2017/. Acesso em: 08 dez. 2025.

    • APA

      Teodoro, B. V. M., & Silva Junior, L. F. da. (2017). Electrophilic alkynylation using hypervalent iodine reagents. In Proceedings. Durham: International Union of Pure and Applied Chemistry (IUPAC). Recuperado de http://www.neopixdmi.com.br/@mci/iupac2017/

    • NLM

      Teodoro BVM, Silva Junior LF da. Electrophilic alkynylation using hypervalent iodine reagents [Internet]. Proceedings. 2017 ;[citado 2025 dez. 08 ] Available from: http://www.neopixdmi.com.br/@mci/iupac2017/

    • Vancouver

      Teodoro BVM, Silva Junior LF da. Electrophilic alkynylation using hypervalent iodine reagents [Internet]. Proceedings. 2017 ;[citado 2025 dez. 08 ] Available from: http://www.neopixdmi.com.br/@mci/iupac2017/

  • Trabalho de evento-resumo

    Baeyer-villiger oxidation mediated by phenylseleninic acid resin in continuous flow conditions: a sustainable alternative in degradation of lignin model compounds (2017)

    Dias, Kevin de Aquino; Santos, Leidaiany Pereira dos; Kisukuri, Camila de Menezes; Andrade, Leandro Helgueira

    Source: Proceedings. Conference titles: World Chemistry Congress. Unidade: IQ

    Subjects: LIGNINA, OXIDAÇÃO

    Acesso à fonteHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      DIAS, Kevin de Aquino et al. Baeyer-villiger oxidation mediated by phenylseleninic acid resin in continuous flow conditions: a sustainable alternative in degradation of lignin model compounds. 2017, Anais.. Durham: International Union of Pure and Applied Chemistry (IUPAC), 2017. Disponível em: http://www.neopixdmi.com.br/@mci/iupac2017/. Acesso em: 08 dez. 2025.

    • APA

      Dias, K. de A., Santos, L. P. dos, Kisukuri, C. de M., & Andrade, L. H. (2017). Baeyer-villiger oxidation mediated by phenylseleninic acid resin in continuous flow conditions: a sustainable alternative in degradation of lignin model compounds. In Proceedings. Durham: International Union of Pure and Applied Chemistry (IUPAC). Recuperado de http://www.neopixdmi.com.br/@mci/iupac2017/

    • NLM

      Dias K de A, Santos LP dos, Kisukuri C de M, Andrade LH. Baeyer-villiger oxidation mediated by phenylseleninic acid resin in continuous flow conditions: a sustainable alternative in degradation of lignin model compounds [Internet]. Proceedings. 2017 ;[citado 2025 dez. 08 ] Available from: http://www.neopixdmi.com.br/@mci/iupac2017/

    • Vancouver

      Dias K de A, Santos LP dos, Kisukuri C de M, Andrade LH. Baeyer-villiger oxidation mediated by phenylseleninic acid resin in continuous flow conditions: a sustainable alternative in degradation of lignin model compounds [Internet]. Proceedings. 2017 ;[citado 2025 dez. 08 ] Available from: http://www.neopixdmi.com.br/@mci/iupac2017/

1 - 20 (497 records)

Digital Library of Intellectual Production of Universidade de São Paulo     2012 - 2025