ReP USP - Resultado da busca

Artigo de periodico
Reducing carbon footprint in grinding: exploring green manufacturing to mitigate CO2 emission from cutting fuids (2023)
Lopes, José Claudio; Oliveira, Danilo de Jesus; Ávila, Benício Nacif; Rodrigues, Matheus de Souza; Souza, Guilherme Guerra de; Talon, Anthony Gaspar; Ribeiro, Fernando Sabino Fonteque; Rodrigues, Alessandro Roger ; Sanchez, Luiz Eduardo de Angelo; Bianchi, Eduardo Carlos
Fonte: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Assuntos: GÁS CARBÔNICO, MEIO AMBIENTE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LOPES, José Claudio et al. Reducing carbon footprint in grinding: exploring green manufacturing to mitigate CO2 emission from cutting fuids. International Journal of Advanced Manufacturing Technology, v. 129, p. 5691-5708, 2023Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-023-12676-4. Acesso em: 08 nov. 2025.
APA
Lopes, J. C., Oliveira, D. de J., Ávila, B. N., Rodrigues, M. de S., Souza, G. G. de, Talon, A. G., et al. (2023). Reducing carbon footprint in grinding: exploring green manufacturing to mitigate CO2 emission from cutting fuids. International Journal of Advanced Manufacturing Technology, 129, 5691-5708. doi:10.1007/s00170-023-12676-4
NLM
Lopes JC, Oliveira D de J, Ávila BN, Rodrigues M de S, Souza GG de, Talon AG, Ribeiro FSF, Rodrigues AR, Sanchez LE de A, Bianchi EC. Reducing carbon footprint in grinding: exploring green manufacturing to mitigate CO2 emission from cutting fuids [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 129 5691-5708.[citado 2025 nov. 08 ] Available from: http://dx.doi.org/10.1007/s00170-023-12676-4
Vancouver
Lopes JC, Oliveira D de J, Ávila BN, Rodrigues M de S, Souza GG de, Talon AG, Ribeiro FSF, Rodrigues AR, Sanchez LE de A, Bianchi EC. Reducing carbon footprint in grinding: exploring green manufacturing to mitigate CO2 emission from cutting fuids [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 129 5691-5708.[citado 2025 nov. 08 ] Available from: http://dx.doi.org/10.1007/s00170-023-12676-4
Artigo de periodico
Advanced ceramic grinding process combined to hazard mitigation to the employees’ health by using an alternative lubri-refrigeration technique (2023)
Fernandes, Lucas de Martini; Javaroni, Rafael Liberatti; Rodrigues, Matheus de Souza; Ávila, Benício Nacif; Moraes, Douglas Lyra de; Ribeiro, Fernando Sabino Fonteque; Rodrigues, Alessandro Roger ; França, Thiago Valle; Sanchez, Luiz Eduardo de Angelo; Bianchi, Eduardo Carlos; Lopes, José Claudio
Fonte: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Assuntos: RETIFICAÇÃO, ALUMINA, MEIO AMBIENTE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERNANDES, Lucas de Martini et al. Advanced ceramic grinding process combined to hazard mitigation to the employees’ health by using an alternative lubri-refrigeration technique. International Journal of Advanced Manufacturing Technology, p. 1-14, 2023Tradução . . Disponível em: https://doi.org/10.1007/s00170-023-11674-w. Acesso em: 08 nov. 2025.
APA
Fernandes, L. de M., Javaroni, R. L., Rodrigues, M. de S., Ávila, B. N., Moraes, D. L. de, Ribeiro, F. S. F., et al. (2023). Advanced ceramic grinding process combined to hazard mitigation to the employees’ health by using an alternative lubri-refrigeration technique. International Journal of Advanced Manufacturing Technology, 1-14. doi:10.1007/s00170-023-11674-w
NLM
Fernandes L de M, Javaroni RL, Rodrigues M de S, Ávila BN, Moraes DL de, Ribeiro FSF, Rodrigues AR, França TV, Sanchez LE de A, Bianchi EC, Lopes JC. Advanced ceramic grinding process combined to hazard mitigation to the employees’ health by using an alternative lubri-refrigeration technique [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 1-14.[citado 2025 nov. 08 ] Available from: https://doi.org/10.1007/s00170-023-11674-w
Vancouver
Fernandes L de M, Javaroni RL, Rodrigues M de S, Ávila BN, Moraes DL de, Ribeiro FSF, Rodrigues AR, França TV, Sanchez LE de A, Bianchi EC, Lopes JC. Advanced ceramic grinding process combined to hazard mitigation to the employees’ health by using an alternative lubri-refrigeration technique [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 1-14.[citado 2025 nov. 08 ] Available from: https://doi.org/10.1007/s00170-023-11674-w
Artigo de periodico
Tribological assessment of the SiO2 coating deposited by sol–gel process toward cutting tool coating (2023)
Pereira, Natália Fernanda Santos; Reis, Barbara Cristina Mendanha; Santos, Anderson Júnior dos ; Houmard, Manuel ; Câmara, Marcelo Araújo; Rodrigues, Alessandro Roger ; Rubio, Juan Carlos Campos
Fonte: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Assuntos: FILMES FINOS, REVESTIMENTOS, TRIBOLOGIA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Natália Fernanda Santos et al. Tribological assessment of the SiO2 coating deposited by sol–gel process toward cutting tool coating. International Journal of Advanced Manufacturing Technology, p. 1-17, 2023Tradução . . Disponível em: https://doi.org/10.1007/s00170-023-11072-2. Acesso em: 08 nov. 2025.
APA
Pereira, N. F. S., Reis, B. C. M., Santos, A. J. dos, Houmard, M., Câmara, M. A., Rodrigues, A. R., & Rubio, J. C. C. (2023). Tribological assessment of the SiO2 coating deposited by sol–gel process toward cutting tool coating. International Journal of Advanced Manufacturing Technology, 1-17. doi:10.1007/s00170-023-11072-2
NLM
Pereira NFS, Reis BCM, Santos AJ dos, Houmard M, Câmara MA, Rodrigues AR, Rubio JCC. Tribological assessment of the SiO2 coating deposited by sol–gel process toward cutting tool coating [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 1-17.[citado 2025 nov. 08 ] Available from: https://doi.org/10.1007/s00170-023-11072-2
Vancouver
Pereira NFS, Reis BCM, Santos AJ dos, Houmard M, Câmara MA, Rodrigues AR, Rubio JCC. Tribological assessment of the SiO2 coating deposited by sol–gel process toward cutting tool coating [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 1-17.[citado 2025 nov. 08 ] Available from: https://doi.org/10.1007/s00170-023-11072-2
Artigo de periodico
Influences of the workpiece material and the tool-surface engagement (TSE) on surface finishing when ball-end milling (2022)
Basso, Igor Fernando; Voigt, Rodrigo; Rodrigues, Alessandro Roger ; Marin, Felipe; Souza, Adriano Fagali de; López de Lacalle, Luis Norberto
Fonte: Journal of Manufacturing Processes. Unidade: EESC
Assuntos: FRESAGEM, RUGOSIDADE SUPERFICIAL, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BASSO, Igor Fernando et al. Influences of the workpiece material and the tool-surface engagement (TSE) on surface finishing when ball-end milling. Journal of Manufacturing Processes, v. 75, p. 219-231, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.jmapro.2021.12.059. Acesso em: 08 nov. 2025.
APA
Basso, I. F., Voigt, R., Rodrigues, A. R., Marin, F., Souza, A. F. de, & López de Lacalle, L. N. (2022). Influences of the workpiece material and the tool-surface engagement (TSE) on surface finishing when ball-end milling. Journal of Manufacturing Processes, 75, 219-231. doi:10.1016/j.jmapro.2021.12.059
NLM
Basso IF, Voigt R, Rodrigues AR, Marin F, Souza AF de, López de Lacalle LN. Influences of the workpiece material and the tool-surface engagement (TSE) on surface finishing when ball-end milling [Internet]. Journal of Manufacturing Processes. 2022 ; 75 219-231.[citado 2025 nov. 08 ] Available from: https://doi.org/10.1016/j.jmapro.2021.12.059
Vancouver
Basso IF, Voigt R, Rodrigues AR, Marin F, Souza AF de, López de Lacalle LN. Influences of the workpiece material and the tool-surface engagement (TSE) on surface finishing when ball-end milling [Internet]. Journal of Manufacturing Processes. 2022 ; 75 219-231.[citado 2025 nov. 08 ] Available from: https://doi.org/10.1016/j.jmapro.2021.12.059
Artigo de periodico
Green manufacturing concept applied to the grinding process of advanced ceramics using an alternative lubri-refrigeration technique (2022)
Talon, Anthony Gaspar; Sato, Bruno Kenta; Rodrigues, Matheus de Souza; Ávila, Benício Nacif; Cuesta, Jorge Luiz; Ribeiro, Fernando Sabino Fonteque; Rodrigues, Alessandro Roger ; Sanchez, Luiz Eduardo de Angelo; Bianchi, Eduardo Carlos; Lopes, José Claudio
Fonte: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Assuntos: MOAGEM, PROCESSOS DE FABRICAÇÃO, CERÂMICA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TALON, Anthony Gaspar et al. Green manufacturing concept applied to the grinding process of advanced ceramics using an alternative lubri-refrigeration technique. International Journal of Advanced Manufacturing Technology, v. 123, p. 2771-2782, 2022Tradução . . Disponível em: https://doi.org/10.1007/s00170-022-10385-y. Acesso em: 08 nov. 2025.
APA
Talon, A. G., Sato, B. K., Rodrigues, M. de S., Ávila, B. N., Cuesta, J. L., Ribeiro, F. S. F., et al. (2022). Green manufacturing concept applied to the grinding process of advanced ceramics using an alternative lubri-refrigeration technique. International Journal of Advanced Manufacturing Technology, 123, 2771-2782. doi:10.1007/s00170-022-10385-y
NLM
Talon AG, Sato BK, Rodrigues M de S, Ávila BN, Cuesta JL, Ribeiro FSF, Rodrigues AR, Sanchez LE de A, Bianchi EC, Lopes JC. Green manufacturing concept applied to the grinding process of advanced ceramics using an alternative lubri-refrigeration technique [Internet]. International Journal of Advanced Manufacturing Technology. 2022 ; 123 2771-2782.[citado 2025 nov. 08 ] Available from: https://doi.org/10.1007/s00170-022-10385-y
Vancouver
Talon AG, Sato BK, Rodrigues M de S, Ávila BN, Cuesta JL, Ribeiro FSF, Rodrigues AR, Sanchez LE de A, Bianchi EC, Lopes JC. Green manufacturing concept applied to the grinding process of advanced ceramics using an alternative lubri-refrigeration technique [Internet]. International Journal of Advanced Manufacturing Technology. 2022 ; 123 2771-2782.[citado 2025 nov. 08 ] Available from: https://doi.org/10.1007/s00170-022-10385-y
Artigo de periodico
Method for damage detection of CFRP plates using lamb waves and digital signal processing techniques (2022)
Monson, Paulo; Conceição Junior, Pedro de Oliveira ; Rodrigues, Alessandro Roger ; Aguair, Paulo; Soares Junior, Cristiano
Fonte: Engineering Proceedings. Unidade: EESC
Assuntos: ENGENHARIA MECÂNICA, PROCESSAMENTO DE SINAIS, PIEZOELETRICIDADE, MATERIAIS COMPÓSITOS, POLÍMEROS (MATERIAIS)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MONSON, Paulo et al. Method for damage detection of CFRP plates using lamb waves and digital signal processing techniques. Engineering Proceedings, v. 27, n. 1, p. 1-6, 2022Tradução . . Disponível em: https://doi.org/10.3390/ecsa-9-13357. Acesso em: 08 nov. 2025.
APA
Monson, P., Conceição Junior, P. de O., Rodrigues, A. R., Aguair, P., & Soares Junior, C. (2022). Method for damage detection of CFRP plates using lamb waves and digital signal processing techniques. Engineering Proceedings, 27( 1), 1-6. doi:10.3390/ecsa-9-13357
NLM
Monson P, Conceição Junior P de O, Rodrigues AR, Aguair P, Soares Junior C. Method for damage detection of CFRP plates using lamb waves and digital signal processing techniques [Internet]. Engineering Proceedings. 2022 ; 27( 1): 1-6.[citado 2025 nov. 08 ] Available from: https://doi.org/10.3390/ecsa-9-13357
Vancouver
Monson P, Conceição Junior P de O, Rodrigues AR, Aguair P, Soares Junior C. Method for damage detection of CFRP plates using lamb waves and digital signal processing techniques [Internet]. Engineering Proceedings. 2022 ; 27( 1): 1-6.[citado 2025 nov. 08 ] Available from: https://doi.org/10.3390/ecsa-9-13357
Artigo de periodico
Grinding performance of bearing steel using MQL under different dilutions and wheel cleaning for green manufacture (2020)
Garcia, Mateus Vinicius; Lopes, José Claudio; Diniz, Anselmo Eduardo; Sanchez, Luiz Eduardo de Angelo; Rodrigues, Alessandro Roger ; Mello, Hamilton José de; Aguiar, Paulo Roberto de; Bianchi, Eduardo Carlos; Volpato, Roberta Silveira
Fonte: Journal of Cleaner Production. Unidade: EESC
Assuntos: ROLAMENTOS, RETIFICAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GARCIA, Mateus Vinicius et al. Grinding performance of bearing steel using MQL under different dilutions and wheel cleaning for green manufacture. Journal of Cleaner Production, v. 257, n. Ju 2020, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.jclepro.2020.120376. Acesso em: 08 nov. 2025.
APA
Garcia, M. V., Lopes, J. C., Diniz, A. E., Sanchez, L. E. de A., Rodrigues, A. R., Mello, H. J. de, et al. (2020). Grinding performance of bearing steel using MQL under different dilutions and wheel cleaning for green manufacture. Journal of Cleaner Production, 257( Ju 2020). doi:10.1016/j.jclepro.2020.120376
NLM
Garcia MV, Lopes JC, Diniz AE, Sanchez LE de A, Rodrigues AR, Mello HJ de, Aguiar PR de, Bianchi EC, Volpato RS. Grinding performance of bearing steel using MQL under different dilutions and wheel cleaning for green manufacture [Internet]. Journal of Cleaner Production. 2020 ; 257( Ju 2020):[citado 2025 nov. 08 ] Available from: https://doi.org/10.1016/j.jclepro.2020.120376
Vancouver
Garcia MV, Lopes JC, Diniz AE, Sanchez LE de A, Rodrigues AR, Mello HJ de, Aguiar PR de, Bianchi EC, Volpato RS. Grinding performance of bearing steel using MQL under different dilutions and wheel cleaning for green manufacture [Internet]. Journal of Cleaner Production. 2020 ; 257( Ju 2020):[citado 2025 nov. 08 ] Available from: https://doi.org/10.1016/j.jclepro.2020.120376
Artigo de periodico
Infuence of coated surfaces and gap size on boiling heat transfer of deionized water (2020)
Nunes, Jéssica Martha; Souza, Reinaldo Rodrigues de; Rodrigues, Alessandro Roger ; Safaei, Mohammad Reza; Cardoso, Elaine Maria
Fonte: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Assuntos: REVESTIMENTOS, NANOTECNOLOGIA, TRANSFERÊNCIA DE CALOR
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
NUNES, Jéssica Martha et al. Infuence of coated surfaces and gap size on boiling heat transfer of deionized water. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 42, p. 1-14, 2020Tradução . . Disponível em: https://doi.org/10.1007/s40430-020-2223-8. Acesso em: 08 nov. 2025.
APA
Nunes, J. M., Souza, R. R. de, Rodrigues, A. R., Safaei, M. R., & Cardoso, E. M. (2020). Infuence of coated surfaces and gap size on boiling heat transfer of deionized water. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-14. doi:10.1007/s40430-020-2223-8
NLM
Nunes JM, Souza RR de, Rodrigues AR, Safaei MR, Cardoso EM. Infuence of coated surfaces and gap size on boiling heat transfer of deionized water [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-14.[citado 2025 nov. 08 ] Available from: https://doi.org/10.1007/s40430-020-2223-8
Vancouver
Nunes JM, Souza RR de, Rodrigues AR, Safaei MR, Cardoso EM. Infuence of coated surfaces and gap size on boiling heat transfer of deionized water [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-14.[citado 2025 nov. 08 ] Available from: https://doi.org/10.1007/s40430-020-2223-8
Artigo de periodico
Grinding process applied to workpieces with different geometries interrupted using CBN wheel (2020)
Rodriguez, Rafael Lemes; Lopes, José Claudio; Garcia, Mateus Vinicius; Tarrento, Gilson Eduardo; Rodrigues, Alessandro Roger ; Sanchez, Luiz Eduardo de Angelo; Mello, Hamilton José de; Aguiar, Paulo Roberto; Bianchi, Eduardo Carlos
Fonte: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Assuntos: INTEGRIDADE ESTRUTURAL, RETIFICAÇÃO, AÇO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RODRIGUEZ, Rafael Lemes et al. Grinding process applied to workpieces with different geometries interrupted using CBN wheel. International Journal of Advanced Manufacturing Technology, n. 107, p. 1265-1275, 2020Tradução . . Disponível em: https://doi.org/10.1007/s00170-020-05122-2. Acesso em: 08 nov. 2025.
APA
Rodriguez, R. L., Lopes, J. C., Garcia, M. V., Tarrento, G. E., Rodrigues, A. R., Sanchez, L. E. de A., et al. (2020). Grinding process applied to workpieces with different geometries interrupted using CBN wheel. International Journal of Advanced Manufacturing Technology, ( 107), 1265-1275. doi:10.1007/s00170-020-05122-2
NLM
Rodriguez RL, Lopes JC, Garcia MV, Tarrento GE, Rodrigues AR, Sanchez LE de A, Mello HJ de, Aguiar PR, Bianchi EC. Grinding process applied to workpieces with different geometries interrupted using CBN wheel [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ;( 107): 1265-1275.[citado 2025 nov. 08 ] Available from: https://doi.org/10.1007/s00170-020-05122-2
Vancouver
Rodriguez RL, Lopes JC, Garcia MV, Tarrento GE, Rodrigues AR, Sanchez LE de A, Mello HJ de, Aguiar PR, Bianchi EC. Grinding process applied to workpieces with different geometries interrupted using CBN wheel [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ;( 107): 1265-1275.[citado 2025 nov. 08 ] Available from: https://doi.org/10.1007/s00170-020-05122-2
Artigo de periodico
Characterization of ceramics coatings processed by sol-gel for cutting tools (2019)
Rezende, Bruna Aparecida ; Santos, Anderson Júnior dos ; Câmara, Marcelo Araújo ; Carmo, Denilson José do; Houmard, Manuel ; Rodrigues, Alessandro Roger ; Rubio, Juan Carlos Campos
Fonte: Coatings. Unidade: EESC
Assuntos: FERRAMENTAS, REVESTIMENTOS, CERÂMICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
REZENDE, Bruna Aparecida et al. Characterization of ceramics coatings processed by sol-gel for cutting tools. Coatings, v. 9, n. 755, 2019Tradução . . Disponível em: https://doi.org/10.3390/coatings9110755. Acesso em: 08 nov. 2025.
APA
Rezende, B. A., Santos, A. J. dos, Câmara, M. A., Carmo, D. J. do, Houmard, M., Rodrigues, A. R., & Rubio, J. C. C. (2019). Characterization of ceramics coatings processed by sol-gel for cutting tools. Coatings, 9( 755). doi:10.3390/coatings9110755
NLM
Rezende BA, Santos AJ dos, Câmara MA, Carmo DJ do, Houmard M, Rodrigues AR, Rubio JCC. Characterization of ceramics coatings processed by sol-gel for cutting tools [Internet]. Coatings. 2019 ; 9( 755):[citado 2025 nov. 08 ] Available from: https://doi.org/10.3390/coatings9110755
Vancouver
Rezende BA, Santos AJ dos, Câmara MA, Carmo DJ do, Houmard M, Rodrigues AR, Rubio JCC. Characterization of ceramics coatings processed by sol-gel for cutting tools [Internet]. Coatings. 2019 ; 9( 755):[citado 2025 nov. 08 ] Available from: https://doi.org/10.3390/coatings9110755
Artigo de periodico
Micro drilling of carbon fiber reinforced polymer (2019)
Basso, Igor; Batista, Marcelo Ferreira; Jasinevicius, Renato Goulart ; Rodrigues, Alessandro Roger ; Rubio, Juan Carlos Campos
Fonte: Composite Structures. Unidade: EESC
Assuntos: PERFURAÇÃO, POLÍMEROS (MATERIAIS), DANO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BASSO, Igor et al. Micro drilling of carbon fiber reinforced polymer. Composite Structures, v. No 2019, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.compstruct.2019.111312. Acesso em: 08 nov. 2025.
APA
Basso, I., Batista, M. F., Jasinevicius, R. G., Rodrigues, A. R., & Rubio, J. C. C. (2019). Micro drilling of carbon fiber reinforced polymer. Composite Structures, No 2019. doi:10.1016/j.compstruct.2019.111312
NLM
Basso I, Batista MF, Jasinevicius RG, Rodrigues AR, Rubio JCC. Micro drilling of carbon fiber reinforced polymer [Internet]. Composite Structures. 2019 ; No 2019[citado 2025 nov. 08 ] Available from: https://doi.org/10.1016/j.compstruct.2019.111312
Vancouver
Basso I, Batista MF, Jasinevicius RG, Rodrigues AR, Rubio JCC. Micro drilling of carbon fiber reinforced polymer [Internet]. Composite Structures. 2019 ; No 2019[citado 2025 nov. 08 ] Available from: https://doi.org/10.1016/j.compstruct.2019.111312
Artigo de periodico
Effect of hardened steel grinding using aluminum oxide wheel under application of cutting fluid with corrosion inhibitors (2019)
Talon, Anthony Gaspar; Lopes, José Claudio; Tavares, André Bueno; Sato, Bruno Kenta; Rodrigues, Alessandro Roger ; Genovez, Mário Celso; Pinto, Tiago Alexandre Dinis; Mello, Hamilton José de; Aguiar, Paulo Roberto; Bianchi, Eduardo Carlos
Fonte: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Assuntos: INIBIDORES DE CORROSÃO, AÇO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TALON, Anthony Gaspar et al. Effect of hardened steel grinding using aluminum oxide wheel under application of cutting fluid with corrosion inhibitors. International Journal of Advanced Manufacturing Technology, n. ju 2019, p. 1437-1448, 2019Tradução . . Disponível em: https://doi.org/10.1007/s00170-019-04005-5. Acesso em: 08 nov. 2025.
APA
Talon, A. G., Lopes, J. C., Tavares, A. B., Sato, B. K., Rodrigues, A. R., Genovez, M. C., et al. (2019). Effect of hardened steel grinding using aluminum oxide wheel under application of cutting fluid with corrosion inhibitors. International Journal of Advanced Manufacturing Technology, ( ju 2019), 1437-1448. doi:10.1007/s00170-019-04005-5
NLM
Talon AG, Lopes JC, Tavares AB, Sato BK, Rodrigues AR, Genovez MC, Pinto TAD, Mello HJ de, Aguiar PR, Bianchi EC. Effect of hardened steel grinding using aluminum oxide wheel under application of cutting fluid with corrosion inhibitors [Internet]. International Journal of Advanced Manufacturing Technology. 2019 ;( ju 2019): 1437-1448.[citado 2025 nov. 08 ] Available from: https://doi.org/10.1007/s00170-019-04005-5
Vancouver
Talon AG, Lopes JC, Tavares AB, Sato BK, Rodrigues AR, Genovez MC, Pinto TAD, Mello HJ de, Aguiar PR, Bianchi EC. Effect of hardened steel grinding using aluminum oxide wheel under application of cutting fluid with corrosion inhibitors [Internet]. International Journal of Advanced Manufacturing Technology. 2019 ;( ju 2019): 1437-1448.[citado 2025 nov. 08 ] Available from: https://doi.org/10.1007/s00170-019-04005-5
Artigo de periodico
Study of tool paths calculated by diferent commercial CAM systems and infuences on the real machining time and surface roughness for milling free-form geometries (2019)
Souza, Adriano Fagali de; Kasemodel, Rodrigo Berretta; Arias, Marcelo; Marin, Felipe; Rodrigues, Alessandro Roger
Fonte: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Assuntos: FERRAMENTAS, FRESAGEM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUZA, Adriano Fagali de et al. Study of tool paths calculated by diferent commercial CAM systems and infuences on the real machining time and surface roughness for milling free-form geometries. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 41, n. 363, p. 01-12, 2019Tradução . . Disponível em: https://doi.org/10.1007/s40430-019-1865-x. Acesso em: 08 nov. 2025.
APA
Souza, A. F. de, Kasemodel, R. B., Arias, M., Marin, F., & Rodrigues, A. R. (2019). Study of tool paths calculated by diferent commercial CAM systems and infuences on the real machining time and surface roughness for milling free-form geometries. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41( 363), 01-12. doi:10.1007/s40430-019-1865-x
NLM
Souza AF de, Kasemodel RB, Arias M, Marin F, Rodrigues AR. Study of tool paths calculated by diferent commercial CAM systems and infuences on the real machining time and surface roughness for milling free-form geometries [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2019 ; 41( 363): 01-12.[citado 2025 nov. 08 ] Available from: https://doi.org/10.1007/s40430-019-1865-x
Vancouver
Souza AF de, Kasemodel RB, Arias M, Marin F, Rodrigues AR. Study of tool paths calculated by diferent commercial CAM systems and infuences on the real machining time and surface roughness for milling free-form geometries [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2019 ; 41( 363): 01-12.[citado 2025 nov. 08 ] Available from: https://doi.org/10.1007/s40430-019-1865-x
Artigo de periodico
Evaluation of grinding process using simultaneously MQL technique and cleaning jet on grinding wheel surface (2019)
Rodriguez, Rafael Lemes; Lopes, José Claudio; Hildebrandt, Rodolfo Alexandre; Perez, Ricardo Rozo Vaz; Diniz, Anselmo Eduardo; Sanchez, Luiz Eduardo de Angelo; Rodrigues, Alessandro Roger ; Mello, Hamilton José de; Aguiar, Paulo Roberto de; Bianchi, Eduardo Carlos
Fonte: Journal of Materials Processing Technology. Unidade: EESC
Assuntos: REFRIGERAÇÃO, USINAGEM, MOAGEM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RODRIGUEZ, Rafael Lemes et al. Evaluation of grinding process using simultaneously MQL technique and cleaning jet on grinding wheel surface. Journal of Materials Processing Technology, v. 271, p. Se 2019, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.jmatprotec.2019.03.019. Acesso em: 08 nov. 2025.
APA
Rodriguez, R. L., Lopes, J. C., Hildebrandt, R. A., Perez, R. R. V., Diniz, A. E., Sanchez, L. E. de A., et al. (2019). Evaluation of grinding process using simultaneously MQL technique and cleaning jet on grinding wheel surface. Journal of Materials Processing Technology, 271, Se 2019. doi:10.1016/j.jmatprotec.2019.03.019
NLM
Rodriguez RL, Lopes JC, Hildebrandt RA, Perez RRV, Diniz AE, Sanchez LE de A, Rodrigues AR, Mello HJ de, Aguiar PR de, Bianchi EC. Evaluation of grinding process using simultaneously MQL technique and cleaning jet on grinding wheel surface [Internet]. Journal of Materials Processing Technology. 2019 ; 271 Se 2019.[citado 2025 nov. 08 ] Available from: https://doi.org/10.1016/j.jmatprotec.2019.03.019
Vancouver
Rodriguez RL, Lopes JC, Hildebrandt RA, Perez RRV, Diniz AE, Sanchez LE de A, Rodrigues AR, Mello HJ de, Aguiar PR de, Bianchi EC. Evaluation of grinding process using simultaneously MQL technique and cleaning jet on grinding wheel surface [Internet]. Journal of Materials Processing Technology. 2019 ; 271 Se 2019.[citado 2025 nov. 08 ] Available from: https://doi.org/10.1016/j.jmatprotec.2019.03.019
Artigo de periodico
Behavior of hardened steel grinding using MQL under cold air and MQL CBN wheel cleaning (2019)
Lopes, José Claudio; Fragoso, Kamira Miksa; Garcia, Mateus Vinicius; Ribeiro, Fernando Sabino Fonteque; Francelin, Alan Polato; Sanchez, Luiz Eduardo de Angelo; Rodrigues, Alessandro Roger ; Mello, Hamilton José de; Aguiar, Paulo Roberto; Bianchi, Eduardo Carlos
Fonte: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Assuntos: MOAGEM, AÇO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LOPES, José Claudio et al. Behavior of hardened steel grinding using MQL under cold air and MQL CBN wheel cleaning. International Journal of Advanced Manufacturing Technology, v. no 2019, n. 105, p. 4373-4387, 2019Tradução . . Disponível em: https://doi.org/10.1007/s00170-019-04571-8. Acesso em: 08 nov. 2025.
APA
Lopes, J. C., Fragoso, K. M., Garcia, M. V., Ribeiro, F. S. F., Francelin, A. P., Sanchez, L. E. de A., et al. (2019). Behavior of hardened steel grinding using MQL under cold air and MQL CBN wheel cleaning. International Journal of Advanced Manufacturing Technology, no 2019( 105), 4373-4387. doi:10.1007/s00170-019-04571-8
NLM
Lopes JC, Fragoso KM, Garcia MV, Ribeiro FSF, Francelin AP, Sanchez LE de A, Rodrigues AR, Mello HJ de, Aguiar PR, Bianchi EC. Behavior of hardened steel grinding using MQL under cold air and MQL CBN wheel cleaning [Internet]. International Journal of Advanced Manufacturing Technology. 2019 ; no 2019( 105): 4373-4387.[citado 2025 nov. 08 ] Available from: https://doi.org/10.1007/s00170-019-04571-8
Vancouver
Lopes JC, Fragoso KM, Garcia MV, Ribeiro FSF, Francelin AP, Sanchez LE de A, Rodrigues AR, Mello HJ de, Aguiar PR, Bianchi EC. Behavior of hardened steel grinding using MQL under cold air and MQL CBN wheel cleaning [Internet]. International Journal of Advanced Manufacturing Technology. 2019 ; no 2019( 105): 4373-4387.[citado 2025 nov. 08 ] Available from: https://doi.org/10.1007/s00170-019-04571-8

Unidades USP

ReP

Filtros

Autores

Assuntos

Título da fonte

Indexado em

Afiliação dos autores externos não normalizada