ReP USP - Resultado da busca

Artigo de periodico
Wear resistance of niobium carbide layers produced on gray cast iron by thermoreactive treatments (2020)
Mariani, Fábio Edson ; Rêgo, Galtiere Corrêa ; Bonella, Pedro Gabriel; Lombardi Neto, Amadeu; Totten, George Edward; Casteletti, Luiz Carlos
Fonte: Journal of Materials Engineering and Performance. Unidade: EESC
Assuntos: DESGASTE DOS MATERIAIS, FERRO FUNDIDO CINZENTO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARIANI, Fábio Edson et al. Wear resistance of niobium carbide layers produced on gray cast iron by thermoreactive treatments. Journal of Materials Engineering and Performance, v. fe 2020, p. 3516-3522, 2020Tradução . . Disponível em: https://doi.org/10.1007/s11665-020-04645-9. Acesso em: 09 nov. 2025.
APA
Mariani, F. E., Rêgo, G. C., Bonella, P. G., Lombardi Neto, A., Totten, G. E., & Casteletti, L. C. (2020). Wear resistance of niobium carbide layers produced on gray cast iron by thermoreactive treatments. Journal of Materials Engineering and Performance, fe 2020, 3516-3522. doi:10.1007/s11665-020-04645-9
NLM
Mariani FE, Rêgo GC, Bonella PG, Lombardi Neto A, Totten GE, Casteletti LC. Wear resistance of niobium carbide layers produced on gray cast iron by thermoreactive treatments [Internet]. Journal of Materials Engineering and Performance. 2020 ; fe 2020 3516-3522.[citado 2025 nov. 09 ] Available from: https://doi.org/10.1007/s11665-020-04645-9
Vancouver
Mariani FE, Rêgo GC, Bonella PG, Lombardi Neto A, Totten GE, Casteletti LC. Wear resistance of niobium carbide layers produced on gray cast iron by thermoreactive treatments [Internet]. Journal of Materials Engineering and Performance. 2020 ; fe 2020 3516-3522.[citado 2025 nov. 09 ] Available from: https://doi.org/10.1007/s11665-020-04645-9
Artigo de periodico
Effect of low-temperature austempering and quenching and partitioning treatments on adhesive wear resistance of high-silicon multiphase steels (2020)
Oliveira, Pedro Gabriel Bonella de; Aureliano Junior, Ricardo Tadeu; Casteletti, Luiz Carlos ; Itman Filho, André; Lombardi Neto, Amadeu; Totten, George Edward
Fonte: Journal of Materials Engineering and Performance. Unidade: EESC
Assuntos: AÇO, RESISTÊNCIA DOS MATERIAIS, DESGASTE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Pedro Gabriel Bonella de et al. Effect of low-temperature austempering and quenching and partitioning treatments on adhesive wear resistance of high-silicon multiphase steels. Journal of Materials Engineering and Performance, v. 29, p. 3542-3550, 2020Tradução . . Disponível em: https://doi.org/10.1007/s11665-020-04699-9. Acesso em: 09 nov. 2025.
APA
Oliveira, P. G. B. de, Aureliano Junior, R. T., Casteletti, L. C., Itman Filho, A., Lombardi Neto, A., & Totten, G. E. (2020). Effect of low-temperature austempering and quenching and partitioning treatments on adhesive wear resistance of high-silicon multiphase steels. Journal of Materials Engineering and Performance, 29, 3542-3550. doi:10.1007/s11665-020-04699-9
NLM
Oliveira PGB de, Aureliano Junior RT, Casteletti LC, Itman Filho A, Lombardi Neto A, Totten GE. Effect of low-temperature austempering and quenching and partitioning treatments on adhesive wear resistance of high-silicon multiphase steels [Internet]. Journal of Materials Engineering and Performance. 2020 ; 29 3542-3550.[citado 2025 nov. 09 ] Available from: https://doi.org/10.1007/s11665-020-04699-9
Vancouver
Oliveira PGB de, Aureliano Junior RT, Casteletti LC, Itman Filho A, Lombardi Neto A, Totten GE. Effect of low-temperature austempering and quenching and partitioning treatments on adhesive wear resistance of high-silicon multiphase steels [Internet]. Journal of Materials Engineering and Performance. 2020 ; 29 3542-3550.[citado 2025 nov. 09 ] Available from: https://doi.org/10.1007/s11665-020-04699-9
Artigo de periodico
Production and characterization of boride and carbide layers on AISI 15B30 steel (2020)
Triani, Rafael Magalhães; Gomes, Lucas Fuscaldi De Assis; Lombardi Neto, Amadeu; Totten, George Edward; Casteletti, Luiz Carlos
Fonte: Journal of Materials Engineering and Performance. Unidade: EESC
Assuntos: AÇO, DESGASTE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TRIANI, Rafael Magalhães et al. Production and characterization of boride and carbide layers on AISI 15B30 steel. Journal of Materials Engineering and Performance, v. 29, p. 3534-3541, 2020Tradução . . Disponível em: https://doi.org/10.1007/s11665-020-04698-w. Acesso em: 09 nov. 2025.
APA
Triani, R. M., Gomes, L. F. D. A., Lombardi Neto, A., Totten, G. E., & Casteletti, L. C. (2020). Production and characterization of boride and carbide layers on AISI 15B30 steel. Journal of Materials Engineering and Performance, 29, 3534-3541. doi:10.1007/s11665-020-04698-w
NLM
Triani RM, Gomes LFDA, Lombardi Neto A, Totten GE, Casteletti LC. Production and characterization of boride and carbide layers on AISI 15B30 steel [Internet]. Journal of Materials Engineering and Performance. 2020 ; 29 3534-3541.[citado 2025 nov. 09 ] Available from: https://doi.org/10.1007/s11665-020-04698-w
Vancouver
Triani RM, Gomes LFDA, Lombardi Neto A, Totten GE, Casteletti LC. Production and characterization of boride and carbide layers on AISI 15B30 steel [Internet]. Journal of Materials Engineering and Performance. 2020 ; 29 3534-3541.[citado 2025 nov. 09 ] Available from: https://doi.org/10.1007/s11665-020-04698-w
Artigo de periodico
Improvement of the tribological characteristics of AISI 8620, 8640 and 52100 steels through thermo-reactive treatments (2019)
Triani, Rafael Magalhães ; Mariani, Fábio Edson ; Gomes, Lucas Fuscaldi De Assis ; Oliveira, Pedro Gabriel Bonella de ; Totten, George E; Casteletti, Luiz Carlos
Fonte: Lubricants. Unidade: EESC
Assuntos: AÇO, TRIBOLOGIA, DESGASTE ADESIVO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TRIANI, Rafael Magalhães et al. Improvement of the tribological characteristics of AISI 8620, 8640 and 52100 steels through thermo-reactive treatments. Lubricants, v. 7, n. 8, 2019Tradução . . Disponível em: https://doi.org/10.3390/lubricants7080063. Acesso em: 09 nov. 2025.
APA
Triani, R. M., Mariani, F. E., Gomes, L. F. D. A., Oliveira, P. G. B. de, Totten, G. E., & Casteletti, L. C. (2019). Improvement of the tribological characteristics of AISI 8620, 8640 and 52100 steels through thermo-reactive treatments. Lubricants, 7( 8). doi:10.3390/lubricants7080063
NLM
Triani RM, Mariani FE, Gomes LFDA, Oliveira PGB de, Totten GE, Casteletti LC. Improvement of the tribological characteristics of AISI 8620, 8640 and 52100 steels through thermo-reactive treatments [Internet]. Lubricants. 2019 ; 7( 8):[citado 2025 nov. 09 ] Available from: https://doi.org/10.3390/lubricants7080063
Vancouver
Triani RM, Mariani FE, Gomes LFDA, Oliveira PGB de, Totten GE, Casteletti LC. Improvement of the tribological characteristics of AISI 8620, 8640 and 52100 steels through thermo-reactive treatments [Internet]. Lubricants. 2019 ; 7( 8):[citado 2025 nov. 09 ] Available from: https://doi.org/10.3390/lubricants7080063
Trabalho de evento
Adhesive wear resistance of low temperature austempered and quenched and partitioned niobium alloyed steels (2019)
Oliveira, Pedro Gabriel Bonella de ; Aureliano, Ricardo Tadeu ; Casteletti, Luiz Carlos ; Itman Filho, André; Lombardi Neto, Amadeu ; Totten, George Edward
Fonte: Proceedings. Nome do evento: ASM Heat Treating Society Conference - Heat Treat 2019. Unidade: EESC
Assuntos: AÇO, DESGASTE ADESIVO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Pedro Gabriel Bonella de et al. Adhesive wear resistance of low temperature austempered and quenched and partitioned niobium alloyed steels. 2019, Anais.. Cleveland: ASM International, 2019. Disponível em: https://repositorio.usp.br/directbitstream/7f54f4a6-c114-40f8-9f09-86aa32ba064a/AdhesiveWearResistanceofLowTemperatureAustemperedandQuenched.pdf. Acesso em: 09 nov. 2025.
APA
Oliveira, P. G. B. de, Aureliano, R. T., Casteletti, L. C., Itman Filho, A., Lombardi Neto, A., & Totten, G. E. (2019). Adhesive wear resistance of low temperature austempered and quenched and partitioned niobium alloyed steels. In Proceedings. Cleveland: ASM International. Recuperado de https://repositorio.usp.br/directbitstream/7f54f4a6-c114-40f8-9f09-86aa32ba064a/AdhesiveWearResistanceofLowTemperatureAustemperedandQuenched.pdf
NLM
Oliveira PGB de, Aureliano RT, Casteletti LC, Itman Filho A, Lombardi Neto A, Totten GE. Adhesive wear resistance of low temperature austempered and quenched and partitioned niobium alloyed steels [Internet]. Proceedings. 2019 ;[citado 2025 nov. 09 ] Available from: https://repositorio.usp.br/directbitstream/7f54f4a6-c114-40f8-9f09-86aa32ba064a/AdhesiveWearResistanceofLowTemperatureAustemperedandQuenched.pdf
Vancouver
Oliveira PGB de, Aureliano RT, Casteletti LC, Itman Filho A, Lombardi Neto A, Totten GE. Adhesive wear resistance of low temperature austempered and quenched and partitioned niobium alloyed steels [Internet]. Proceedings. 2019 ;[citado 2025 nov. 09 ] Available from: https://repositorio.usp.br/directbitstream/7f54f4a6-c114-40f8-9f09-86aa32ba064a/AdhesiveWearResistanceofLowTemperatureAustemperedandQuenched.pdf
Trabalho de evento
Boro-austempering treatment of high strength bainitic steels (2019)
Oliveira, Pedro Gabriel Bonella de ; Mariani, Fábio Edson ; Casteletti, Luiz Carlos ; Itman Filho, André; Lombardi Neto, Amadeu ; Totten, George Edward
Fonte: Proceedings. Nome do evento: ASM Heat Treating Society Conference - Heat Treat 2019. Unidade: EESC
Assuntos: DESGASTE ADESIVO, AÇO DE ALTA RESISTÊNCIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Pedro Gabriel Bonella de et al. Boro-austempering treatment of high strength bainitic steels. 2019, Anais.. Cleveland: ASM International, 2019. Disponível em: https://repositorio.usp.br/directbitstream/fad6a861-da84-4556-a90a-908665402924/prod_022955_sysno_3006321.pdf. Acesso em: 09 nov. 2025.
APA
Oliveira, P. G. B. de, Mariani, F. E., Casteletti, L. C., Itman Filho, A., Lombardi Neto, A., & Totten, G. E. (2019). Boro-austempering treatment of high strength bainitic steels. In Proceedings. Cleveland: ASM International. Recuperado de https://repositorio.usp.br/directbitstream/fad6a861-da84-4556-a90a-908665402924/prod_022955_sysno_3006321.pdf
NLM
Oliveira PGB de, Mariani FE, Casteletti LC, Itman Filho A, Lombardi Neto A, Totten GE. Boro-austempering treatment of high strength bainitic steels [Internet]. Proceedings. 2019 ;[citado 2025 nov. 09 ] Available from: https://repositorio.usp.br/directbitstream/fad6a861-da84-4556-a90a-908665402924/prod_022955_sysno_3006321.pdf
Vancouver
Oliveira PGB de, Mariani FE, Casteletti LC, Itman Filho A, Lombardi Neto A, Totten GE. Boro-austempering treatment of high strength bainitic steels [Internet]. Proceedings. 2019 ;[citado 2025 nov. 09 ] Available from: https://repositorio.usp.br/directbitstream/fad6a861-da84-4556-a90a-908665402924/prod_022955_sysno_3006321.pdf
Artigo de periodico
Corrosion behavior of plasma nitrided and nitrocarburised supermartensitic stainless steel (2018)
Fernandes, Frederico Augusto Pires ; Picone, Carlos Alberto ; Totten, George Edward ; Casteletti, Luiz Carlos
Fonte: Materials Research. Unidade: EESC
Assuntos: AÇO INOXIDÁVEL MARTENSÍTICO, CORROSÃO DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERNANDES, Frederico Augusto Pires et al. Corrosion behavior of plasma nitrided and nitrocarburised supermartensitic stainless steel. Materials Research, v. 21, n. 3, 2018Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-mr-2016-0793. Acesso em: 09 nov. 2025.
APA
Fernandes, F. A. P., Picone, C. A., Totten, G. E., & Casteletti, L. C. (2018). Corrosion behavior of plasma nitrided and nitrocarburised supermartensitic stainless steel. Materials Research, 21( 3). doi:10.1590/1980-5373-mr-2016-0793
NLM
Fernandes FAP, Picone CA, Totten GE, Casteletti LC. Corrosion behavior of plasma nitrided and nitrocarburised supermartensitic stainless steel [Internet]. Materials Research. 2018 ; 21( 3):[citado 2025 nov. 09 ] Available from: https://doi.org/10.1590/1980-5373-mr-2016-0793
Vancouver
Fernandes FAP, Picone CA, Totten GE, Casteletti LC. Corrosion behavior of plasma nitrided and nitrocarburised supermartensitic stainless steel [Internet]. Materials Research. 2018 ; 21( 3):[citado 2025 nov. 09 ] Available from: https://doi.org/10.1590/1980-5373-mr-2016-0793
Artigo de periodico
Aging of a Fe-Mn-Al steel using plasma nitrocarburizing (2017)
Takeya, Gustavo Satoru ; Mariani, Fábio Edson ; Casteletti, Luiz Carlos ; Lombardi Neto, Amadeu ; Totten, George Edward
Fonte: Materials Performance and Characterization. Unidade: EESC
Assuntos: DESGASTE DOS MATERIAIS, TRATAMENTO TÉRMICO, LIGAS METÁLICAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TAKEYA, Gustavo Satoru et al. Aging of a Fe-Mn-Al steel using plasma nitrocarburizing. Materials Performance and Characterization, v. 6, n. 4, p. 554-560, 2017Tradução . . Disponível em: https://doi.org/10.1520/MPC20160094. Acesso em: 09 nov. 2025.
APA
Takeya, G. S., Mariani, F. E., Casteletti, L. C., Lombardi Neto, A., & Totten, G. E. (2017). Aging of a Fe-Mn-Al steel using plasma nitrocarburizing. Materials Performance and Characterization, 6( 4), 554-560. doi:10.1520/MPC20160094
NLM
Takeya GS, Mariani FE, Casteletti LC, Lombardi Neto A, Totten GE. Aging of a Fe-Mn-Al steel using plasma nitrocarburizing [Internet]. Materials Performance and Characterization. 2017 ; 6( 4): 554-560.[citado 2025 nov. 09 ] Available from: https://doi.org/10.1520/MPC20160094
Vancouver
Takeya GS, Mariani FE, Casteletti LC, Lombardi Neto A, Totten GE. Aging of a Fe-Mn-Al steel using plasma nitrocarburizing [Internet]. Materials Performance and Characterization. 2017 ; 6( 4): 554-560.[citado 2025 nov. 09 ] Available from: https://doi.org/10.1520/MPC20160094
Artigo de periodico
Microstructural characterization of layers produced by plasma nitriding on austenitic and superaustenitic stainless steel grades (2012)
Totten, George Edward ; Casteletti, Luiz Carlos ; Fernandes, Frederico Augusto Pires ; Gallego, Juno
Fonte: ASTM International. Journal. Unidades: EESC, Interunidades em Ciência e Engenharia de Materiais
Assuntos: AÇO INOXIDÁVEL AUSTENÍTICO, CORROSÃO DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TOTTEN, George Edward et al. Microstructural characterization of layers produced by plasma nitriding on austenitic and superaustenitic stainless steel grades. ASTM International. Journal, v. 9, n. 2, 2012Tradução . . Disponível em: https://doi.org/10.520/JAI103564. Acesso em: 09 nov. 2025.
APA
Totten, G. E., Casteletti, L. C., Fernandes, F. A. P., & Gallego, J. (2012). Microstructural characterization of layers produced by plasma nitriding on austenitic and superaustenitic stainless steel grades. ASTM International. Journal, 9( 2). doi:10.520/JAI103564
NLM
Totten GE, Casteletti LC, Fernandes FAP, Gallego J. Microstructural characterization of layers produced by plasma nitriding on austenitic and superaustenitic stainless steel grades [Internet]. ASTM International. Journal. 2012 ; 9( 2):[citado 2025 nov. 09 ] Available from: https://doi.org/10.520/JAI103564
Vancouver
Totten GE, Casteletti LC, Fernandes FAP, Gallego J. Microstructural characterization of layers produced by plasma nitriding on austenitic and superaustenitic stainless steel grades [Internet]. ASTM International. Journal. 2012 ; 9( 2):[citado 2025 nov. 09 ] Available from: https://doi.org/10.520/JAI103564
Artigo de periodico
Plasma nitriding and nitrocarburising of a supermartensitic stainless steel (2012)
Fernandes, Frederico Augusto Pires ; Totten, George Edward ; Gallego, Juno; Casteletti, Luiz Carlos
Fonte: International Heat Treatment and Surface Engineering. Unidades: EESC, Interunidades em Ciência e Engenharia de Materiais
Assuntos: BAIXA TEMPERATURA, DESGASTE DOS MATERIAIS, AÇO INOXIDÁVEL MARTENSÍTICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERNANDES, Frederico Augusto Pires et al. Plasma nitriding and nitrocarburising of a supermartensitic stainless steel. International Heat Treatment and Surface Engineering, v. 6, n. 1, p. 24-27, 2012Tradução . . Disponível em: https://doi.org/10.1179/1749514811Z.0000000008. Acesso em: 09 nov. 2025.
APA
Fernandes, F. A. P., Totten, G. E., Gallego, J., & Casteletti, L. C. (2012). Plasma nitriding and nitrocarburising of a supermartensitic stainless steel. International Heat Treatment and Surface Engineering, 6( 1), 24-27. doi:10.1179/1749514811Z.0000000008
NLM
Fernandes FAP, Totten GE, Gallego J, Casteletti LC. Plasma nitriding and nitrocarburising of a supermartensitic stainless steel [Internet]. International Heat Treatment and Surface Engineering. 2012 ; 6( 1): 24-27.[citado 2025 nov. 09 ] Available from: https://doi.org/10.1179/1749514811Z.0000000008
Vancouver
Fernandes FAP, Totten GE, Gallego J, Casteletti LC. Plasma nitriding and nitrocarburising of a supermartensitic stainless steel [Internet]. International Heat Treatment and Surface Engineering. 2012 ; 6( 1): 24-27.[citado 2025 nov. 09 ] Available from: https://doi.org/10.1179/1749514811Z.0000000008
Artigo de periodico
Effect of plasma nitriding on the wear and corrosion properties of hastelloy CW2M alloy (2011)
Casteletti, Luiz Carlos ; Fernandes, Frederico Augusto Pires ; Heck, Stênio Cristaldo; Picon, Carlos Alberto; Totten, George Edward
Fonte: ASTM International. Journal. Unidades: EESC, Interunidades em Ciência e Engenharia de Materiais
Assuntos: DESGASTE CORROSIVO, DIFRAÇÃO POR RAIOS X, LIGAS METÁLICAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CASTELETTI, Luiz Carlos et al. Effect of plasma nitriding on the wear and corrosion properties of hastelloy CW2M alloy. ASTM International. Journal, v. 8, n. 7, 2011Tradução . . Disponível em: https://doi.org/10.1520/JAI103253. Acesso em: 09 nov. 2025.
APA
Casteletti, L. C., Fernandes, F. A. P., Heck, S. C., Picon, C. A., & Totten, G. E. (2011). Effect of plasma nitriding on the wear and corrosion properties of hastelloy CW2M alloy. ASTM International. Journal, 8( 7). doi:10.1520/JAI103253
NLM
Casteletti LC, Fernandes FAP, Heck SC, Picon CA, Totten GE. Effect of plasma nitriding on the wear and corrosion properties of hastelloy CW2M alloy [Internet]. ASTM International. Journal. 2011 ; 8( 7):[citado 2025 nov. 09 ] Available from: https://doi.org/10.1520/JAI103253
Vancouver
Casteletti LC, Fernandes FAP, Heck SC, Picon CA, Totten GE. Effect of plasma nitriding on the wear and corrosion properties of hastelloy CW2M alloy [Internet]. ASTM International. Journal. 2011 ; 8( 7):[citado 2025 nov. 09 ] Available from: https://doi.org/10.1520/JAI103253

Unidades USP

ReP

Filtros

Autores

Autores USP

Ano de publicação

Assuntos

Título da fonte

Indexado em

Afiliação dos autores externos não normalizada