ReP USP - Resultado da busca

Artigo de periodico
Bio-based polyurethane applied as matrix of fiberglass reinforced composite (2017)
Sousa Junior, R R; Miranda, E A; Batalha, Gilmar Ferreira ; Santos, D J
Fonte: Journal of Achievements in Materials and Manufacturing Engineering. Unidade: EP
Assuntos: POLÍMEROS (MATERIAIS), MATERIAIS COMPÓSITOS, RESINAS COMPOSTAS, LIGNINA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUSA JUNIOR, R R et al. Bio-based polyurethane applied as matrix of fiberglass reinforced composite. Journal of Achievements in Materials and Manufacturing Engineering, v. 1, n. 81, p. 5-10, 2017Tradução . . Disponível em: https://doi.org/10.5604/01.3001.0010.2031. Acesso em: 24 ago. 2024.
APA
Sousa Junior, R. R., Miranda, E. A., Batalha, G. F., & Santos, D. J. (2017). Bio-based polyurethane applied as matrix of fiberglass reinforced composite. Journal of Achievements in Materials and Manufacturing Engineering, 1( 81), 5-10. doi:10.5604/01.3001.0010.2031
NLM
Sousa Junior RR, Miranda EA, Batalha GF, Santos DJ. Bio-based polyurethane applied as matrix of fiberglass reinforced composite [Internet]. Journal of Achievements in Materials and Manufacturing Engineering. 2017 ; 1( 81): 5-10.[citado 2024 ago. 24 ] Available from: https://doi.org/10.5604/01.3001.0010.2031
Vancouver
Sousa Junior RR, Miranda EA, Batalha GF, Santos DJ. Bio-based polyurethane applied as matrix of fiberglass reinforced composite [Internet]. Journal of Achievements in Materials and Manufacturing Engineering. 2017 ; 1( 81): 5-10.[citado 2024 ago. 24 ] Available from: https://doi.org/10.5604/01.3001.0010.2031
Artigo de periodico
Towards a design for ecological management and product sustainability: European and Brazilian approaches (2013)
Batalha, Gilmar Ferreira ; Roszak, Marek Tadeusz; Silva, Iris Bento da; Agostinho, Oswaldo Luiz; Dobrzanski, Leszek A
Fonte: Archives of Materials Science and Engineering. Unidades: EP, EESC
Assuntos: SUSTENTABILIDADE, DESIGN, ECOLOGIA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BATALHA, Gilmar Ferreira et al. Towards a design for ecological management and product sustainability: European and Brazilian approaches. Archives of Materials Science and Engineering, v. 64, n. 1, p. 34-39, 2013Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/60710bdd-a493-4fab-8603-9eee236d3601/OK___artigo%2029%20-%20Towards%20a%20design%20for%20ecological%20management%20and%20product%20sustainability%20-%20european%20and%20brazilian%20approaches.%20Archives%20of%20Materials%20Science%20and%20Engineering.pdf. Acesso em: 24 ago. 2024.
APA
Batalha, G. F., Roszak, M. T., Silva, I. B. da, Agostinho, O. L., & Dobrzanski, L. A. (2013). Towards a design for ecological management and product sustainability: European and Brazilian approaches. Archives of Materials Science and Engineering, 64( 1), 34-39. Recuperado de https://repositorio.usp.br/directbitstream/60710bdd-a493-4fab-8603-9eee236d3601/OK___artigo%2029%20-%20Towards%20a%20design%20for%20ecological%20management%20and%20product%20sustainability%20-%20european%20and%20brazilian%20approaches.%20Archives%20of%20Materials%20Science%20and%20Engineering.pdf
NLM
Batalha GF, Roszak MT, Silva IB da, Agostinho OL, Dobrzanski LA. Towards a design for ecological management and product sustainability: European and Brazilian approaches [Internet]. Archives of Materials Science and Engineering. 2013 ; 64( 1): 34-39.[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/60710bdd-a493-4fab-8603-9eee236d3601/OK___artigo%2029%20-%20Towards%20a%20design%20for%20ecological%20management%20and%20product%20sustainability%20-%20european%20and%20brazilian%20approaches.%20Archives%20of%20Materials%20Science%20and%20Engineering.pdf
Vancouver
Batalha GF, Roszak MT, Silva IB da, Agostinho OL, Dobrzanski LA. Towards a design for ecological management and product sustainability: European and Brazilian approaches [Internet]. Archives of Materials Science and Engineering. 2013 ; 64( 1): 34-39.[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/60710bdd-a493-4fab-8603-9eee236d3601/OK___artigo%2029%20-%20Towards%20a%20design%20for%20ecological%20management%20and%20product%20sustainability%20-%20european%20and%20brazilian%20approaches.%20Archives%20of%20Materials%20Science%20and%20Engineering.pdf
Artigo de periodico
Improved model to predict machined surface roughness based on the cutting vibrastions signal during hard turning (2010)
Delijaicov, Sergio ; Leonardi, Fabrizio; Bordinassi, Éd Claudio ; Batalha, Gilmar Ferreira
Fonte: Archives of Materials Science and Engineering. Unidade: EP
Assuntos: TORNEAMENTO, VIBRAÇÕES DE MÁQUINAS, MANUFATURA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DELIJAICOV, Sergio et al. Improved model to predict machined surface roughness based on the cutting vibrastions signal during hard turning. Archives of Materials Science and Engineering, v. 45, n. 2, p. 102-107, 2010Tradução . . Disponível em: http://www.archivesmse.org/vol45_2/4523.pdf. Acesso em: 24 ago. 2024.
APA
Delijaicov, S., Leonardi, F., Bordinassi, É. C., & Batalha, G. F. (2010). Improved model to predict machined surface roughness based on the cutting vibrastions signal during hard turning. Archives of Materials Science and Engineering, 45( 2), 102-107. Recuperado de http://www.archivesmse.org/vol45_2/4523.pdf
NLM
Delijaicov S, Leonardi F, Bordinassi ÉC, Batalha GF. Improved model to predict machined surface roughness based on the cutting vibrastions signal during hard turning [Internet]. Archives of Materials Science and Engineering. 2010 ; 45( 2): 102-107.[citado 2024 ago. 24 ] Available from: http://www.archivesmse.org/vol45_2/4523.pdf
Vancouver
Delijaicov S, Leonardi F, Bordinassi ÉC, Batalha GF. Improved model to predict machined surface roughness based on the cutting vibrastions signal during hard turning [Internet]. Archives of Materials Science and Engineering. 2010 ; 45( 2): 102-107.[citado 2024 ago. 24 ] Available from: http://www.archivesmse.org/vol45_2/4523.pdf
Artigo de periodico
Creep age forming: a short review of fundaments and applications (2010)
Ribeiro, F C; Marinho, E P; Inforzato, D. J; Costa, P R; Batalha, Gilmar Ferreira
Fonte: Journal of Achievements in Materials and Manufacturing Engineering. Unidade: EP
Assuntos: PROCESSOS DE FABRICAÇÃO (ENGENHARIA MECÂNICA), CONFORMAÇÃO MECÂNICA (PLANEJAMENTO;PROCESSOS), FLUÊNCIA DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, F C et al. Creep age forming: a short review of fundaments and applications. Journal of Achievements in Materials and Manufacturing Engineering, v. No 2010, n. 1, p. 353-361, 2010Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/281627df-722a-4b2c-aab7-cc116886e0d8/Batalha-2010-Creep%20age%20forming%20a%20short%20review%20of%20fundaments%20ok.pdf. Acesso em: 24 ago. 2024.
APA
Ribeiro, F. C., Marinho, E. P., Inforzato, D. J., Costa, P. R., & Batalha, G. F. (2010). Creep age forming: a short review of fundaments and applications. Journal of Achievements in Materials and Manufacturing Engineering, No 2010( 1), 353-361. Recuperado de https://repositorio.usp.br/directbitstream/281627df-722a-4b2c-aab7-cc116886e0d8/Batalha-2010-Creep%20age%20forming%20a%20short%20review%20of%20fundaments%20ok.pdf
NLM
Ribeiro FC, Marinho EP, Inforzato DJ, Costa PR, Batalha GF. Creep age forming: a short review of fundaments and applications [Internet]. Journal of Achievements in Materials and Manufacturing Engineering. 2010 ; No 2010( 1): 353-361.[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/281627df-722a-4b2c-aab7-cc116886e0d8/Batalha-2010-Creep%20age%20forming%20a%20short%20review%20of%20fundaments%20ok.pdf
Vancouver
Ribeiro FC, Marinho EP, Inforzato DJ, Costa PR, Batalha GF. Creep age forming: a short review of fundaments and applications [Internet]. Journal of Achievements in Materials and Manufacturing Engineering. 2010 ; No 2010( 1): 353-361.[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/281627df-722a-4b2c-aab7-cc116886e0d8/Batalha-2010-Creep%20age%20forming%20a%20short%20review%20of%20fundaments%20ok.pdf
Artigo de periodico
Mechanical behaviour characterizing and simulation of polyacrylate rubber (2010)
Santos, Demetrio Jackson dos; Batalha, Gilmar Ferreira
Fonte: Journal of Achievements in Materials and Manufacturing Engineering. Unidade: EP
Assuntos: POLÍMEROS (MATERIAIS), MÉTODO DOS ELEMENTOS FINITOS, ELASTÔMEROS, BORRACHA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Demetrio Jackson dos e BATALHA, Gilmar Ferreira. Mechanical behaviour characterizing and simulation of polyacrylate rubber. Journal of Achievements in Materials and Manufacturing Engineering, v. 38, n. Ja 2010, p. 33-40, 2010Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/77321141-eadb-4302-b6f4-71cdc7e8faf3/Batalha-2010-Mechanical%20behaviour%20characterizing%20ok.pdf. Acesso em: 24 ago. 2024.
APA
Santos, D. J. dos, & Batalha, G. F. (2010). Mechanical behaviour characterizing and simulation of polyacrylate rubber. Journal of Achievements in Materials and Manufacturing Engineering, 38( Ja 2010), 33-40. Recuperado de https://repositorio.usp.br/directbitstream/77321141-eadb-4302-b6f4-71cdc7e8faf3/Batalha-2010-Mechanical%20behaviour%20characterizing%20ok.pdf
NLM
Santos DJ dos, Batalha GF. Mechanical behaviour characterizing and simulation of polyacrylate rubber [Internet]. Journal of Achievements in Materials and Manufacturing Engineering. 2010 ; 38( Ja 2010): 33-40.[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/77321141-eadb-4302-b6f4-71cdc7e8faf3/Batalha-2010-Mechanical%20behaviour%20characterizing%20ok.pdf
Vancouver
Santos DJ dos, Batalha GF. Mechanical behaviour characterizing and simulation of polyacrylate rubber [Internet]. Journal of Achievements in Materials and Manufacturing Engineering. 2010 ; 38( Ja 2010): 33-40.[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/77321141-eadb-4302-b6f4-71cdc7e8faf3/Batalha-2010-Mechanical%20behaviour%20characterizing%20ok.pdf
Artigo de periodico
Surface integrity functional analysis in hard turning AISI 8620 case hardened steel through 3D topographical measurement (2010)
Farias, Adalto de; Delijaicov, Sergio ; Batalha, Gilmar Ferreira
Fonte: Archives of Materials Science and Engineering. Unidade: EP
Assuntos: TORNEAMENTO, USINAGEM, RUGOSIDADE SUPERFICIAL, MANUFATURA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FARIAS, Adalto de e DELIJAICOV, Sergio e BATALHA, Gilmar Ferreira. Surface integrity functional analysis in hard turning AISI 8620 case hardened steel through 3D topographical measurement. Archives of Materials Science and Engineering, v. No 2010, n. 1, p. 47-52, 2010Tradução . . Disponível em: http://www.archivesmse.org/vol46_1/4613.pdf. Acesso em: 24 ago. 2024.
APA
Farias, A. de, Delijaicov, S., & Batalha, G. F. (2010). Surface integrity functional analysis in hard turning AISI 8620 case hardened steel through 3D topographical measurement. Archives of Materials Science and Engineering, No 2010( 1), 47-52. Recuperado de http://www.archivesmse.org/vol46_1/4613.pdf
NLM
Farias A de, Delijaicov S, Batalha GF. Surface integrity functional analysis in hard turning AISI 8620 case hardened steel through 3D topographical measurement [Internet]. Archives of Materials Science and Engineering. 2010 ; No 2010( 1): 47-52.[citado 2024 ago. 24 ] Available from: http://www.archivesmse.org/vol46_1/4613.pdf
Vancouver
Farias A de, Delijaicov S, Batalha GF. Surface integrity functional analysis in hard turning AISI 8620 case hardened steel through 3D topographical measurement [Internet]. Archives of Materials Science and Engineering. 2010 ; No 2010( 1): 47-52.[citado 2024 ago. 24 ] Available from: http://www.archivesmse.org/vol46_1/4613.pdf
Artigo de periodico
Integrated product and process system with continuous improvement in the auto parts industry (2009)
Silva, Iris Bento da; Batalha, Gilmar Ferreira ; Stipkovic Filho, Marco; Ceccarelli, Fernando Zaramella; Anjos, João Batista; Fesz, Marcin
Fonte: Journal of Achievements in Materials and Manufacturing Engineering. Unidade: EP
Assuntos: QUALIDADE DA PRODUÇÃO, INDÚSTRIA AUTOMOBILÍSTICA, ENGENHARIA AUTOMOTIVA, CIM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Iris Bento da et al. Integrated product and process system with continuous improvement in the auto parts industry. Journal of Achievements in Materials and Manufacturing Engineering, v. 34, n. Ju2009, p. 204-213, 2009Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/b17d2756-88bf-40e2-9d9b-d0553ba03e60/Stipkovic-2009-Integrated%20product%20and%20process%20system%20with%20continuous%20improvement%20in%20the%20auto%20parts%20industry.pdf. Acesso em: 24 ago. 2024.
APA
Silva, I. B. da, Batalha, G. F., Stipkovic Filho, M., Ceccarelli, F. Z., Anjos, J. B., & Fesz, M. (2009). Integrated product and process system with continuous improvement in the auto parts industry. Journal of Achievements in Materials and Manufacturing Engineering, 34( Ju2009), 204-213. Recuperado de https://repositorio.usp.br/directbitstream/b17d2756-88bf-40e2-9d9b-d0553ba03e60/Stipkovic-2009-Integrated%20product%20and%20process%20system%20with%20continuous%20improvement%20in%20the%20auto%20parts%20industry.pdf
NLM
Silva IB da, Batalha GF, Stipkovic Filho M, Ceccarelli FZ, Anjos JB, Fesz M. Integrated product and process system with continuous improvement in the auto parts industry [Internet]. Journal of Achievements in Materials and Manufacturing Engineering. 2009 ; 34( Ju2009): 204-213.[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/b17d2756-88bf-40e2-9d9b-d0553ba03e60/Stipkovic-2009-Integrated%20product%20and%20process%20system%20with%20continuous%20improvement%20in%20the%20auto%20parts%20industry.pdf
Vancouver
Silva IB da, Batalha GF, Stipkovic Filho M, Ceccarelli FZ, Anjos JB, Fesz M. Integrated product and process system with continuous improvement in the auto parts industry [Internet]. Journal of Achievements in Materials and Manufacturing Engineering. 2009 ; 34( Ju2009): 204-213.[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/b17d2756-88bf-40e2-9d9b-d0553ba03e60/Stipkovic-2009-Integrated%20product%20and%20process%20system%20with%20continuous%20improvement%20in%20the%20auto%20parts%20industry.pdf
Trabalho de evento-resumo
Integrated product and process system with continuous improvement in the auto parts industry (2009)
Silva, Iris Bento da; Batalha, Gilmar Ferreira ; Stipkovic Filho, Marco; Ceccarelli, Fernando Zaramella; Anjos, João Batista; Fesz, Marcin
Fonte: Comment' 09. Nome do evento: Worldwide Congress on Materials and Manufacturing Engineering Technology. Unidade: EP
Assuntos: QUALIDADE DA PRODUÇÃO, INDÚSTRIA AUTOMOBILÍSTICA, ENGENHARIA AUTOMOTIVA, CIM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Iris Bento da et al. Integrated product and process system with continuous improvement in the auto parts industry. 2009, Anais.. Gliwice: s.n., 2009. Disponível em: https://repositorio.usp.br/directbitstream/d7a30d12-1f19-4f4d-a733-f37b4fe653ce/Stipkovic-2009-integrated%20product%20and%20process.pdf. Acesso em: 24 ago. 2024.
APA
Silva, I. B. da, Batalha, G. F., Stipkovic Filho, M., Ceccarelli, F. Z., Anjos, J. B., & Fesz, M. (2009). Integrated product and process system with continuous improvement in the auto parts industry. In Comment' 09. Gliwice: s.n. Recuperado de https://repositorio.usp.br/directbitstream/d7a30d12-1f19-4f4d-a733-f37b4fe653ce/Stipkovic-2009-integrated%20product%20and%20process.pdf
NLM
Silva IB da, Batalha GF, Stipkovic Filho M, Ceccarelli FZ, Anjos JB, Fesz M. Integrated product and process system with continuous improvement in the auto parts industry [Internet]. Comment' 09. 2009 ;[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/d7a30d12-1f19-4f4d-a733-f37b4fe653ce/Stipkovic-2009-integrated%20product%20and%20process.pdf
Vancouver
Silva IB da, Batalha GF, Stipkovic Filho M, Ceccarelli FZ, Anjos JB, Fesz M. Integrated product and process system with continuous improvement in the auto parts industry [Internet]. Comment' 09. 2009 ;[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/d7a30d12-1f19-4f4d-a733-f37b4fe653ce/Stipkovic-2009-integrated%20product%20and%20process.pdf
Artigo de periodico
Placement over containers with fixed dimensions solved with adaptive neighborhood simulated annealing (2009)
Martins, T. C; Tsuzuki, Marcos de Sales Guerra
Fonte: Bulletin of the Polish Academy of Sciences Technical Sciences. Unidade: EP
Assuntos: OTIMIZAÇÃO COMBINATÓRIA, SIMULAÇÃO, HEURÍSTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTINS, T. C e TSUZUKI, Marcos de Sales Guerra. Placement over containers with fixed dimensions solved with adaptive neighborhood simulated annealing. Bulletin of the Polish Academy of Sciences Technical Sciences, v. 57, n. 3, p. 273-280, 2009Tradução . . Disponível em: https://doi.org/10.2478/v10175-010-0129-9. Acesso em: 24 ago. 2024.
APA
Martins, T. C., & Tsuzuki, M. de S. G. (2009). Placement over containers with fixed dimensions solved with adaptive neighborhood simulated annealing. Bulletin of the Polish Academy of Sciences Technical Sciences, 57(3), 273-280. doi:10.2478/v10175-010-0129-9
NLM
Martins TC, Tsuzuki M de SG. Placement over containers with fixed dimensions solved with adaptive neighborhood simulated annealing [Internet]. Bulletin of the Polish Academy of Sciences Technical Sciences. 2009 ; 57(3): 273-280.[citado 2024 ago. 24 ] Available from: https://doi.org/10.2478/v10175-010-0129-9
Vancouver
Martins TC, Tsuzuki M de SG. Placement over containers with fixed dimensions solved with adaptive neighborhood simulated annealing [Internet]. Bulletin of the Polish Academy of Sciences Technical Sciences. 2009 ; 57(3): 273-280.[citado 2024 ago. 24 ] Available from: https://doi.org/10.2478/v10175-010-0129-9
Artigo de periodico
Automotive body-in-white dimensional stability through pre-control application in the subassembly process (2008)
Sanches Junior, Leonardo Marto; Stipkovic Filho, Marco; Batalha, Gilmar Ferreira
Fonte: Journal of Achievements in Materials and Manufacturing Engineering. Unidade: EP
Assuntos: MANUFATURA, ENGENHARIA AUTOMOTIVA, CUSTO DE OPERAÇÕES, QUALIDADE DA PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANCHES JUNIOR, Leonardo Marto e STIPKOVIC FILHO, Marco e BATALHA, Gilmar Ferreira. Automotive body-in-white dimensional stability through pre-control application in the subassembly process. Journal of Achievements in Materials and Manufacturing Engineering, v. 31, n. 2, p. 705-711, 2008Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/906ed869-7563-4f6a-a461-c93a12e01614/Batalha-2008-Automotive%20body-in-white%20dimensional%20ok.pdf. Acesso em: 24 ago. 2024.
APA
Sanches Junior, L. M., Stipkovic Filho, M., & Batalha, G. F. (2008). Automotive body-in-white dimensional stability through pre-control application in the subassembly process. Journal of Achievements in Materials and Manufacturing Engineering, 31( 2), 705-711. Recuperado de https://repositorio.usp.br/directbitstream/906ed869-7563-4f6a-a461-c93a12e01614/Batalha-2008-Automotive%20body-in-white%20dimensional%20ok.pdf
NLM
Sanches Junior LM, Stipkovic Filho M, Batalha GF. Automotive body-in-white dimensional stability through pre-control application in the subassembly process [Internet]. Journal of Achievements in Materials and Manufacturing Engineering. 2008 ; 31( 2): 705-711.[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/906ed869-7563-4f6a-a461-c93a12e01614/Batalha-2008-Automotive%20body-in-white%20dimensional%20ok.pdf
Vancouver
Sanches Junior LM, Stipkovic Filho M, Batalha GF. Automotive body-in-white dimensional stability through pre-control application in the subassembly process [Internet]. Journal of Achievements in Materials and Manufacturing Engineering. 2008 ; 31( 2): 705-711.[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/906ed869-7563-4f6a-a461-c93a12e01614/Batalha-2008-Automotive%20body-in-white%20dimensional%20ok.pdf
Artigo de periodico
Concurrent engineering and DFMA approaches on the developement of automotive panels and doors (2008)
Krumenauer, Fábio Zuchetto; Matayoshi, César Takao; Silva, Iris Bento da; Stipkovic Filho, Marco; Batalha, Gilmar Ferreira
Fonte: Journal of Achievements in Materials and Manufacturing Engineering. Unidade: EP
Assuntos: INDÚSTRIA AUTOMOBILÍSTICA, PROCESSOS DE FABRICAÇÃO (ENGENHARIA MECÂNICA), ENGENHARIA AUTOMOTIVA, DESENVOLVIMENTO DE PRODUTOS, QUALIDADE DA PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
KRUMENAUER, Fábio Zuchetto et al. Concurrent engineering and DFMA approaches on the developement of automotive panels and doors. Journal of Achievements in Materials and Manufacturing Engineering, v. 31, n. 2, p. 690-698, 2008Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/d4fccade-e6c9-441f-8f14-4b0365f44729/Batalha-2008-Concurrent%20engineering%20and%20DFMA%20approaches%20ok.pdf. Acesso em: 24 ago. 2024.
APA
Krumenauer, F. Z., Matayoshi, C. T., Silva, I. B. da, Stipkovic Filho, M., & Batalha, G. F. (2008). Concurrent engineering and DFMA approaches on the developement of automotive panels and doors. Journal of Achievements in Materials and Manufacturing Engineering, 31( 2), 690-698. Recuperado de https://repositorio.usp.br/directbitstream/d4fccade-e6c9-441f-8f14-4b0365f44729/Batalha-2008-Concurrent%20engineering%20and%20DFMA%20approaches%20ok.pdf
NLM
Krumenauer FZ, Matayoshi CT, Silva IB da, Stipkovic Filho M, Batalha GF. Concurrent engineering and DFMA approaches on the developement of automotive panels and doors [Internet]. Journal of Achievements in Materials and Manufacturing Engineering. 2008 ; 31( 2): 690-698.[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/d4fccade-e6c9-441f-8f14-4b0365f44729/Batalha-2008-Concurrent%20engineering%20and%20DFMA%20approaches%20ok.pdf
Vancouver
Krumenauer FZ, Matayoshi CT, Silva IB da, Stipkovic Filho M, Batalha GF. Concurrent engineering and DFMA approaches on the developement of automotive panels and doors [Internet]. Journal of Achievements in Materials and Manufacturing Engineering. 2008 ; 31( 2): 690-698.[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/d4fccade-e6c9-441f-8f14-4b0365f44729/Batalha-2008-Concurrent%20engineering%20and%20DFMA%20approaches%20ok.pdf
Trabalho de evento
Simulated Annealing with Adaptive Neighborhood Applied to the Placement Over Containers with Fixed Dimensions (2008)
Martins, Thiago de Castro ; Tsuzuki, Marcos de Sales Guerra
Fonte: IFAC 2008: preprints. Nome do evento: IFAC Workshop on Intelligent Manufacturing Systems(IMSO8). Unidade: EP
Assuntos: PESQUISA OPERACIONAL (SISTEMAS), OPERAÇÕES DE TRANSPORTES, OTIMIZAÇÃO COMBINATÓRIA, LOGÍSTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTINS, Thiago de Castro e TSUZUKI, Marcos de Sales Guerra. Simulated Annealing with Adaptive Neighborhood Applied to the Placement Over Containers with Fixed Dimensions. 2008, Anais.. [S.l.]: Escola Politécnica, Universidade de São Paulo, 2008. Disponível em: https://doi.org/10.3182/20081205-2-CL-4009.00020. Acesso em: 24 ago. 2024.
APA
Martins, T. de C., & Tsuzuki, M. de S. G. (2008). Simulated Annealing with Adaptive Neighborhood Applied to the Placement Over Containers with Fixed Dimensions. In IFAC 2008: preprints. [S.l.]: Escola Politécnica, Universidade de São Paulo. doi:10.3182/20081205-2-CL-4009.00020
NLM
Martins T de C, Tsuzuki M de SG. Simulated Annealing with Adaptive Neighborhood Applied to the Placement Over Containers with Fixed Dimensions [Internet]. IFAC 2008: preprints. 2008 ;[citado 2024 ago. 24 ] Available from: https://doi.org/10.3182/20081205-2-CL-4009.00020
Vancouver
Martins T de C, Tsuzuki M de SG. Simulated Annealing with Adaptive Neighborhood Applied to the Placement Over Containers with Fixed Dimensions [Internet]. IFAC 2008: preprints. 2008 ;[citado 2024 ago. 24 ] Available from: https://doi.org/10.3182/20081205-2-CL-4009.00020
Artigo de periodico
Residual stresses modelling in hard turning and its correlation with the cutting forces (2007)
Batalha, Gilmar Ferreira ; Aguiar, João Batista de ; Bordinassi, Éd Claudio ; Stipkovic Filho, Marco; Delijaicov, Sergio
Fonte: Journal of Archievements in Materials and Manufacturing Engineering. Unidade: EP
Assuntos: TENSÃO RESIDUAL, USINAGEM, PROCESSOS DE FABRICAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BATALHA, Gilmar Ferreira et al. Residual stresses modelling in hard turning and its correlation with the cutting forces. Journal of Archievements in Materials and Manufacturing Engineering, v. 24, n. 1, p. 350-356, 2007Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/37d92a5e-d509-400b-8f78-98b80966bcc6/Stipkovic-2007-Residual%20stresses%20modelling%20in%20hard%20turning%20and%20its%20correlation%20with%20the%20cutting%20forces.pdf. Acesso em: 24 ago. 2024.
APA
Batalha, G. F., Aguiar, J. B. de, Bordinassi, É. C., Stipkovic Filho, M., & Delijaicov, S. (2007). Residual stresses modelling in hard turning and its correlation with the cutting forces. Journal of Archievements in Materials and Manufacturing Engineering, 24( 1), 350-356. Recuperado de https://repositorio.usp.br/directbitstream/37d92a5e-d509-400b-8f78-98b80966bcc6/Stipkovic-2007-Residual%20stresses%20modelling%20in%20hard%20turning%20and%20its%20correlation%20with%20the%20cutting%20forces.pdf
NLM
Batalha GF, Aguiar JB de, Bordinassi ÉC, Stipkovic Filho M, Delijaicov S. Residual stresses modelling in hard turning and its correlation with the cutting forces [Internet]. Journal of Archievements in Materials and Manufacturing Engineering. 2007 ; 24( 1): 350-356.[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/37d92a5e-d509-400b-8f78-98b80966bcc6/Stipkovic-2007-Residual%20stresses%20modelling%20in%20hard%20turning%20and%20its%20correlation%20with%20the%20cutting%20forces.pdf
Vancouver
Batalha GF, Aguiar JB de, Bordinassi ÉC, Stipkovic Filho M, Delijaicov S. Residual stresses modelling in hard turning and its correlation with the cutting forces [Internet]. Journal of Archievements in Materials and Manufacturing Engineering. 2007 ; 24( 1): 350-356.[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/37d92a5e-d509-400b-8f78-98b80966bcc6/Stipkovic-2007-Residual%20stresses%20modelling%20in%20hard%20turning%20and%20its%20correlation%20with%20the%20cutting%20forces.pdf
Artigo de periodico
Superficial integrity analysis in a super duplex stainless steel after turning (2006)
Bordinassi, Éd Claudio ; Stipkovic Filho, Marco; Batalha, Gilmar Ferreira ; Delijaicov, Sergio ; Lima, Nelson Batista de
Fonte: Journal of Archievements in Materials and Manufacturing Engineering. Unidade: EP
Assuntos: MÁQUINAS OPERATRIZES, AÇO INOXIDÁVEL, TENSÃO RESIDUAL, TORNEAMENTO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BORDINASSI, Éd Claudio et al. Superficial integrity analysis in a super duplex stainless steel after turning. Journal of Archievements in Materials and Manufacturing Engineering, v. 18, n. 1-2, 2006Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/9dae5f9d-fc62-4d4b-9a91-4938d818f798/Batalha-2006-Superficial%20integrity%20analysis%20in%20a%20super.pdf. Acesso em: 24 ago. 2024.
APA
Bordinassi, É. C., Stipkovic Filho, M., Batalha, G. F., Delijaicov, S., & Lima, N. B. de. (2006). Superficial integrity analysis in a super duplex stainless steel after turning. Journal of Archievements in Materials and Manufacturing Engineering, 18( 1-2). Recuperado de https://repositorio.usp.br/directbitstream/9dae5f9d-fc62-4d4b-9a91-4938d818f798/Batalha-2006-Superficial%20integrity%20analysis%20in%20a%20super.pdf
NLM
Bordinassi ÉC, Stipkovic Filho M, Batalha GF, Delijaicov S, Lima NB de. Superficial integrity analysis in a super duplex stainless steel after turning [Internet]. Journal of Archievements in Materials and Manufacturing Engineering. 2006 ; 18( 1-2):[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/9dae5f9d-fc62-4d4b-9a91-4938d818f798/Batalha-2006-Superficial%20integrity%20analysis%20in%20a%20super.pdf
Vancouver
Bordinassi ÉC, Stipkovic Filho M, Batalha GF, Delijaicov S, Lima NB de. Superficial integrity analysis in a super duplex stainless steel after turning [Internet]. Journal of Archievements in Materials and Manufacturing Engineering. 2006 ; 18( 1-2):[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/9dae5f9d-fc62-4d4b-9a91-4938d818f798/Batalha-2006-Superficial%20integrity%20analysis%20in%20a%20super.pdf
Trabalho de evento-resumo
Experimental and numerical simulation of tube hydroforming(THF) (2005)
Abrantes, Jorge Paiva; Batalha, Gilmar Ferreira ; Ponce, Aline Szabo
Fonte: Programme & Abstracts. Nome do evento: Worldwide Congress on Materials and Manufacturing Engineering and Technology. Unidade: EP
Assuntos: CONFORMAÇÃO MECÂNICA (SIMULAÇÃO NUMÉRICA), PROCESSOS DE FABRICAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ABRANTES, Jorge Paiva e BATALHA, Gilmar Ferreira e PONCE, Aline Szabo. Experimental and numerical simulation of tube hydroforming(THF). 2005, Anais.. Gliwice: Politechnika, 2005. Disponível em: https://repositorio.usp.br/directbitstream/fe4ae094-09f9-4c71-9ad1-e987c0217fe7/Batalha-2005-experimental%20and%20numerical%20simulation-resumo%20AMPT.pdf. Acesso em: 24 ago. 2024.
APA
Abrantes, J. P., Batalha, G. F., & Ponce, A. S. (2005). Experimental and numerical simulation of tube hydroforming(THF). In Programme & Abstracts. Gliwice: Politechnika. Recuperado de https://repositorio.usp.br/directbitstream/fe4ae094-09f9-4c71-9ad1-e987c0217fe7/Batalha-2005-experimental%20and%20numerical%20simulation-resumo%20AMPT.pdf
NLM
Abrantes JP, Batalha GF, Ponce AS. Experimental and numerical simulation of tube hydroforming(THF) [Internet]. Programme & Abstracts. 2005 ;[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/fe4ae094-09f9-4c71-9ad1-e987c0217fe7/Batalha-2005-experimental%20and%20numerical%20simulation-resumo%20AMPT.pdf
Vancouver
Abrantes JP, Batalha GF, Ponce AS. Experimental and numerical simulation of tube hydroforming(THF) [Internet]. Programme & Abstracts. 2005 ;[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/fe4ae094-09f9-4c71-9ad1-e987c0217fe7/Batalha-2005-experimental%20and%20numerical%20simulation-resumo%20AMPT.pdf
Trabalho de evento-resumo
The use of Nd: YAG laser weld for large scale volume assembly of automotive body in white (2005)
Ribolla, Adriano; Damoulis, Gleiton Luiz; Batalha, Gilmar Ferreira
Fonte: Programme & Abstracts. Nome do evento: Worldwide Congress on Materials and Manufacturing Engineering and Technology. Unidade: EP
Assuntos: INOVAÇÕES TECNOLÓGICAS, INDÚSTRIA AUTOMOBILÍSTICA, MANUFATURA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBOLLA, Adriano e DAMOULIS, Gleiton Luiz e BATALHA, Gilmar Ferreira. The use of Nd: YAG laser weld for large scale volume assembly of automotive body in white. 2005, Anais.. Gliwice: Politechnika, 2005. Disponível em: https://repositorio.usp.br/directbitstream/4c86d522-2642-46e9-8f07-f2d02060039c/Batalha-2005-the%20use%20of%20Nd-resumo%20AMPT.pdf. Acesso em: 24 ago. 2024.
APA
Ribolla, A., Damoulis, G. L., & Batalha, G. F. (2005). The use of Nd: YAG laser weld for large scale volume assembly of automotive body in white. In Programme & Abstracts. Gliwice: Politechnika. Recuperado de https://repositorio.usp.br/directbitstream/4c86d522-2642-46e9-8f07-f2d02060039c/Batalha-2005-the%20use%20of%20Nd-resumo%20AMPT.pdf
NLM
Ribolla A, Damoulis GL, Batalha GF. The use of Nd: YAG laser weld for large scale volume assembly of automotive body in white [Internet]. Programme & Abstracts. 2005 ;[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/4c86d522-2642-46e9-8f07-f2d02060039c/Batalha-2005-the%20use%20of%20Nd-resumo%20AMPT.pdf
Vancouver
Ribolla A, Damoulis GL, Batalha GF. The use of Nd: YAG laser weld for large scale volume assembly of automotive body in white [Internet]. Programme & Abstracts. 2005 ;[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/4c86d522-2642-46e9-8f07-f2d02060039c/Batalha-2005-the%20use%20of%20Nd-resumo%20AMPT.pdf
Trabalho de evento
Image recostruction base on topology optimization and applied to electrical impedance tomography (2004)
Lima, Cícero Ribeiro de; González Lima, Raúl ; Silva, Emílio Carlos Nelli
Fonte: Proceedings. Nome do evento: International Conference on Electrical Bioimpedance. Unidade: EP
Assuntos: TOMOGRAFIA, IMAGEAMENTO (BIOENGENHARIA), PROGRAMAÇÃO NÃO LINEAR, MÉTODO DOS ELEMENTOS FINITOS, BIOENGENHARIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LIMA, Cícero Ribeiro de e GONZÁLEZ LIMA, Raúl e SILVA, Emílio Carlos Nelli. Image recostruction base on topology optimization and applied to electrical impedance tomography. 2004, Anais.. Gdansk: Escola Politécnica, Universidade de São Paulo, 2004. Disponível em: https://repositorio.usp.br/directbitstream/e0bd5e84-1c75-4dcf-8fbc-ad64aa54a4fd/Lima_R-2004-Image%20reconstruction%20ok.pdf. Acesso em: 24 ago. 2024.
APA
Lima, C. R. de, González Lima, R., & Silva, E. C. N. (2004). Image recostruction base on topology optimization and applied to electrical impedance tomography. In Proceedings. Gdansk: Escola Politécnica, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/e0bd5e84-1c75-4dcf-8fbc-ad64aa54a4fd/Lima_R-2004-Image%20reconstruction%20ok.pdf
NLM
Lima CR de, González Lima R, Silva ECN. Image recostruction base on topology optimization and applied to electrical impedance tomography [Internet]. Proceedings. 2004 ;[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/e0bd5e84-1c75-4dcf-8fbc-ad64aa54a4fd/Lima_R-2004-Image%20reconstruction%20ok.pdf
Vancouver
Lima CR de, González Lima R, Silva ECN. Image recostruction base on topology optimization and applied to electrical impedance tomography [Internet]. Proceedings. 2004 ;[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/e0bd5e84-1c75-4dcf-8fbc-ad64aa54a4fd/Lima_R-2004-Image%20reconstruction%20ok.pdf
Trabalho de evento-resumo
Topology optimization applied to the design of functionally graded material (FGM) structures (2004)
Silva, Emílio Carlos Nelli ; Paulino, Gláucio Hermogenes
Fonte: ICTAM04 Abstracts Book. Nome do evento: IUTAM International Union of Theoretical and Applied Mechanics. Unidade: EP
Assuntos: TOPOLOGIA (OTIMIZAÇÃO), ESTRUTURAS (OTIMIZAÇÃO), MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Emílio Carlos Nelli e PAULINO, Gláucio Hermogenes. Topology optimization applied to the design of functionally graded material (FGM) structures. 2004, Anais.. Warszawa: IPPT PAN, 2004. Disponível em: https://repositorio.usp.br/directbitstream/1d9674f1-9814-4f15-8c23-915e9e5a85c9/Silva_E-2004-Topology%20optimization%20applied%20to%20the%20design%20of%20functionally%20graded%20material%20%28FGM%29%20structures.pdf. Acesso em: 24 ago. 2024.
APA
Silva, E. C. N., & Paulino, G. H. (2004). Topology optimization applied to the design of functionally graded material (FGM) structures. In ICTAM04 Abstracts Book. Warszawa: IPPT PAN. Recuperado de https://repositorio.usp.br/directbitstream/1d9674f1-9814-4f15-8c23-915e9e5a85c9/Silva_E-2004-Topology%20optimization%20applied%20to%20the%20design%20of%20functionally%20graded%20material%20%28FGM%29%20structures.pdf
NLM
Silva ECN, Paulino GH. Topology optimization applied to the design of functionally graded material (FGM) structures [Internet]. ICTAM04 Abstracts Book. 2004 ;[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/1d9674f1-9814-4f15-8c23-915e9e5a85c9/Silva_E-2004-Topology%20optimization%20applied%20to%20the%20design%20of%20functionally%20graded%20material%20%28FGM%29%20structures.pdf
Vancouver
Silva ECN, Paulino GH. Topology optimization applied to the design of functionally graded material (FGM) structures [Internet]. ICTAM04 Abstracts Book. 2004 ;[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/1d9674f1-9814-4f15-8c23-915e9e5a85c9/Silva_E-2004-Topology%20optimization%20applied%20to%20the%20design%20of%20functionally%20graded%20material%20%28FGM%29%20structures.pdf
Artigo de periodico
Proposal of PFS-R as a modeling tool for complex resource sharing discrete production systems (1999)
Hasegawa, Kensue; Miyagi, Paulo Eigi ; Takahashi, Kouji; Li-Qun, Ma; Sugisawa, Makiko
Fonte: Systems Science. Unidade: EP
Assunto: INTELIGÊNCIA ARTIFICIAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
HASEGAWA, Kensue et al. Proposal of PFS-R as a modeling tool for complex resource sharing discrete production systems. Systems Science, v. 25, n. 1, p. 57-70, 1999Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/3bf83ac6-4673-4f98-9248-f560017bff68/Miyagi-1999-proposal%20of%20pfs-r%20as%20a%20modeling%20tool.pdf. Acesso em: 24 ago. 2024.
APA
Hasegawa, K., Miyagi, P. E., Takahashi, K., Li-Qun, M., & Sugisawa, M. (1999). Proposal of PFS-R as a modeling tool for complex resource sharing discrete production systems. Systems Science, 25( 1), 57-70. Recuperado de https://repositorio.usp.br/directbitstream/3bf83ac6-4673-4f98-9248-f560017bff68/Miyagi-1999-proposal%20of%20pfs-r%20as%20a%20modeling%20tool.pdf
NLM
Hasegawa K, Miyagi PE, Takahashi K, Li-Qun M, Sugisawa M. Proposal of PFS-R as a modeling tool for complex resource sharing discrete production systems [Internet]. Systems Science. 1999 ; 25( 1): 57-70.[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/3bf83ac6-4673-4f98-9248-f560017bff68/Miyagi-1999-proposal%20of%20pfs-r%20as%20a%20modeling%20tool.pdf
Vancouver
Hasegawa K, Miyagi PE, Takahashi K, Li-Qun M, Sugisawa M. Proposal of PFS-R as a modeling tool for complex resource sharing discrete production systems [Internet]. Systems Science. 1999 ; 25( 1): 57-70.[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/3bf83ac6-4673-4f98-9248-f560017bff68/Miyagi-1999-proposal%20of%20pfs-r%20as%20a%20modeling%20tool.pdf
Trabalho de evento
Topology optimization of piezoelectric microstructures (1997)
Silva, Emílio Carlos Nelli ; Fonseca, J. S. O.; Kikuchi, N.
Fonte: Proceddings. Nome do evento: World Congress of Structural and Multidisciplinary Optimization. Unidade: EP
Assuntos: MÉTODOS NUMÉRICOS DE OTIMIZAÇÃO, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Emílio Carlos Nelli e FONSECA, J. S. O. e KIKUCHI, N. Topology optimization of piezoelectric microstructures. 1997, Anais.. Warsaw: Institute of Fundamental Technologica research, Polish Academy of Sciences, 1997. Disponível em: https://repositorio.usp.br/directbitstream/15ab77f2-e6e7-4a57-b0ed-ea2ea158f121/Silva_E-1997-topology%20optimization%20of%20piezoelectric%20microstructures.pdf. Acesso em: 24 ago. 2024.
APA
Silva, E. C. N., Fonseca, J. S. O., & Kikuchi, N. (1997). Topology optimization of piezoelectric microstructures. In Proceddings. Warsaw: Institute of Fundamental Technologica research, Polish Academy of Sciences. Recuperado de https://repositorio.usp.br/directbitstream/15ab77f2-e6e7-4a57-b0ed-ea2ea158f121/Silva_E-1997-topology%20optimization%20of%20piezoelectric%20microstructures.pdf
NLM
Silva ECN, Fonseca JSO, Kikuchi N. Topology optimization of piezoelectric microstructures [Internet]. Proceddings. 1997 ;[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/15ab77f2-e6e7-4a57-b0ed-ea2ea158f121/Silva_E-1997-topology%20optimization%20of%20piezoelectric%20microstructures.pdf
Vancouver
Silva ECN, Fonseca JSO, Kikuchi N. Topology optimization of piezoelectric microstructures [Internet]. Proceddings. 1997 ;[citado 2024 ago. 24 ] Available from: https://repositorio.usp.br/directbitstream/15ab77f2-e6e7-4a57-b0ed-ea2ea158f121/Silva_E-1997-topology%20optimization%20of%20piezoelectric%20microstructures.pdf

Unidades USP

ReP

Filtros

Autores

Autores USP

Ano de publicação

Assuntos

Título da fonte

Nome do evento

Indexado em

Afiliação dos autores externos não normalizada