ReP USP - Resultado da busca

Artigo de periodico
Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty (2024)
Marini, Vinicius K.; Sorban, Bruno A.; Silva, Maíra Martins da ; Bortolussi, Roberto; Fleury, Agenor de Toledo ; Trigo, Flávio Celso
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidades: EESC, EP
Subjects: MOTORES DE COMBUSTÃO INTERNA, VEÍCULOS ELÉTRICOS, DINÂMICA VEICULAR, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARINI, Vinicius K. et al. Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 46, p. 1-14, 2024Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-023-04604-0. Acesso em: 05 out. 2024.
APA
Marini, V. K., Sorban, B. A., Silva, M. M. da, Bortolussi, R., Fleury, A. de T., & Trigo, F. C. (2024). Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46, 1-14. doi:10.1007/s40430-023-04604-0
NLM
Marini VK, Sorban BA, Silva MM da, Bortolussi R, Fleury A de T, Trigo FC. Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-14.[citado 2024 out. 05 ] Available from: https://dx.doi.org/10.1007/s40430-023-04604-0
Vancouver
Marini VK, Sorban BA, Silva MM da, Bortolussi R, Fleury A de T, Trigo FC. Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-14.[citado 2024 out. 05 ] Available from: https://dx.doi.org/10.1007/s40430-023-04604-0
Artigo de periodico
Model analysis for differential pressure two-phase flow rate meter in intermittent flow rate meter in intermittent flow (2021)
Pellegrini, Sérgio de Paula ; Wrasse, A N; Silva, M J da; Melgarejo Morales, Rigoberto Eleazar; Trigo, Francisco; Baliño, Jorge Luis ; Trigo, Flávio Celso
Source: Flow Measurement and Instrumentation. Unidade: EP
Subjects: TRANSFERÊNCIA DE CALOR, FLUXO DOS GASES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PELLEGRINI, Sérgio de Paula et al. Model analysis for differential pressure two-phase flow rate meter in intermittent flow rate meter in intermittent flow. Flow Measurement and Instrumentation, v. 81, p. 1-12, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.flowmeasinst.2021.102017. Acesso em: 05 out. 2024.
APA
Pellegrini, S. de P., Wrasse, A. N., Silva, M. J. da, Melgarejo Morales, R. E., Trigo, F., Baliño, J. L., & Trigo, F. C. (2021). Model analysis for differential pressure two-phase flow rate meter in intermittent flow rate meter in intermittent flow. Flow Measurement and Instrumentation, 81, 1-12. doi:10.1016/j.flowmeasinst.2021.102017
NLM
Pellegrini S de P, Wrasse AN, Silva MJ da, Melgarejo Morales RE, Trigo F, Baliño JL, Trigo FC. Model analysis for differential pressure two-phase flow rate meter in intermittent flow rate meter in intermittent flow [Internet]. Flow Measurement and Instrumentation. 2021 ; 81 1-12.[citado 2024 out. 05 ] Available from: https://doi.org/10.1016/j.flowmeasinst.2021.102017
Vancouver
Pellegrini S de P, Wrasse AN, Silva MJ da, Melgarejo Morales RE, Trigo F, Baliño JL, Trigo FC. Model analysis for differential pressure two-phase flow rate meter in intermittent flow rate meter in intermittent flow [Internet]. Flow Measurement and Instrumentation. 2021 ; 81 1-12.[citado 2024 out. 05 ] Available from: https://doi.org/10.1016/j.flowmeasinst.2021.102017
Artigo de periodico
Explaining the importance of Euler’s method in rigid-body dynamics (2020)
Fleury, Agenor de Toledo ; Fleury, Agenor de Toledo ; Trigo, Flávio Celso
Source: International Journal of Mechanical Engineering Education. Unidade: EP
Subjects: DINÂMICA, EQUAÇÕES DE EULER, ENSINO, SISTEMAS DINÂMICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FLEURY, Agenor de Toledo e FLEURY, Agenor de Toledo e TRIGO, Flávio Celso. Explaining the importance of Euler’s method in rigid-body dynamics. International Journal of Mechanical Engineering Education, v. 50, n. 1, p. 1-15, 2020Tradução . . Disponível em: https://doi.org/10.1177/0306419020934123. Acesso em: 05 out. 2024.
APA
Fleury, A. de T., Fleury, A. de T., & Trigo, F. C. (2020). Explaining the importance of Euler’s method in rigid-body dynamics. International Journal of Mechanical Engineering Education, 50( 1), 1-15. doi:10.1177/0306419020934123
NLM
Fleury A de T, Fleury A de T, Trigo FC. Explaining the importance of Euler’s method in rigid-body dynamics [Internet]. International Journal of Mechanical Engineering Education. 2020 ; 50( 1): 1-15.[citado 2024 out. 05 ] Available from: https://doi.org/10.1177/0306419020934123
Vancouver
Fleury A de T, Fleury A de T, Trigo FC. Explaining the importance of Euler’s method in rigid-body dynamics [Internet]. International Journal of Mechanical Engineering Education. 2020 ; 50( 1): 1-15.[citado 2024 out. 05 ] Available from: https://doi.org/10.1177/0306419020934123
Artigo de periodico
On the dynamics of fame images identifed through computer vision and modal methods (2020)
Chui, Danilo de Santana ; Silva Neto, ‪Gustavo Cunha da ; Trigo, Flávio Celso ; Martins, Flavius Portella Ribas ; Fleury, Agenor de Toledo
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EP
Subjects: COMBUSTÃO, VISÃO COMPUTACIONAL, IDENTIFICAÇÃO DE SISTEMAS, ALGORITMOS PARA IMAGENS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CHUI, Danilo de Santana et al. On the dynamics of fame images identifed through computer vision and modal methods. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 42, p. 1-15, 2020Tradução . . Disponível em: https://doi.org/10.1007/s40430-020-02413-3. Acesso em: 05 out. 2024.
APA
Chui, D. de S., Silva Neto, ‪G. C. da, Trigo, F. C., Martins, F. P. R., & Fleury, A. de T. (2020). On the dynamics of fame images identifed through computer vision and modal methods. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-15. doi:10.1007/s40430-020-02413-3
NLM
Chui D de S, Silva Neto ‪GC da, Trigo FC, Martins FPR, Fleury A de T. On the dynamics of fame images identifed through computer vision and modal methods [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ;42 1-15.[citado 2024 out. 05 ] Available from: https://doi.org/10.1007/s40430-020-02413-3
Vancouver
Chui D de S, Silva Neto ‪GC da, Trigo FC, Martins FPR, Fleury A de T. On the dynamics of fame images identifed through computer vision and modal methods [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ;42 1-15.[citado 2024 out. 05 ] Available from: https://doi.org/10.1007/s40430-020-02413-3
Trabalho de evento
Fuzzy inference of oil furnace combustion state through computer vision information (2019)
Silva Neto, ‪Gustavo Cunha da ; Chui, Danilo de Santana ; Trigo, Flávio Celso ; Martins, Flavius Portella Ribas ; Fleury, Agenor de Toledo
Source: DINAME 2019. Conference titles: International Symposium on Dynamic Problems of Mechanics - DINAME. Unidade: EP
Subjects: COMBUSTÃO, PROCESSAMENTO DIGITAL DE IMAGENS, LÓGICA FUZZY
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA NETO, ‪Gustavo Cunha da et al. Fuzzy inference of oil furnace combustion state through computer vision information. 2019, Anais.. Rio de Janeiro, RJ: ABCM, 2019. Disponível em: https://doi.org/10.26678/ABCM.DINAME2019.DIN2019-0198. Acesso em: 05 out. 2024.
APA
Silva Neto, ‪G. C. da, Chui, D. de S., Trigo, F. C., Martins, F. P. R., & Fleury, A. de T. (2019). Fuzzy inference of oil furnace combustion state through computer vision information. In DINAME 2019. Rio de Janeiro, RJ: ABCM. doi:10.26678/ABCM.DINAME2019.DIN2019-0198
NLM
Silva Neto ‪GC da, Chui D de S, Trigo FC, Martins FPR, Fleury A de T. Fuzzy inference of oil furnace combustion state through computer vision information [Internet]. DINAME 2019. 2019 ;[citado 2024 out. 05 ] Available from: https://doi.org/10.26678/ABCM.DINAME2019.DIN2019-0198
Vancouver
Silva Neto ‪GC da, Chui D de S, Trigo FC, Martins FPR, Fleury A de T. Fuzzy inference of oil furnace combustion state through computer vision information [Internet]. DINAME 2019. 2019 ;[citado 2024 out. 05 ] Available from: https://doi.org/10.26678/ABCM.DINAME2019.DIN2019-0198
Artigo de periodico
Motion of a disk in contact with a parametric 2D curve and Painlevé’s paradox (2018)
Martins, Flavius Portella Ribas ; Fleury, Agenor de Toledo ; Trigo, Flávio Celso
Source: Multibody system dynamics. Unidade: EP
Subjects: SISTEMAS DINÂMICOS, FRICÇÃO, SISTEMAS HÍBRIDOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTINS, Flavius Portella Ribas e FLEURY, Agenor de Toledo e TRIGO, Flávio Celso. Motion of a disk in contact with a parametric 2D curve and Painlevé’s paradox. Multibody system dynamics, v. 48, p. 427-450, 2018Tradução . . Disponível em: https://doi.org/10.1007/s11044-019-09702-3. Acesso em: 05 out. 2024.
APA
Martins, F. P. R., Fleury, A. de T., & Trigo, F. C. (2018). Motion of a disk in contact with a parametric 2D curve and Painlevé’s paradox. Multibody system dynamics, 48, 427-450. doi:10.1007/s11044-019-09702-3
NLM
Martins FPR, Fleury A de T, Trigo FC. Motion of a disk in contact with a parametric 2D curve and Painlevé’s paradox [Internet]. Multibody system dynamics. 2018 ; 48 427-450.[citado 2024 out. 05 ] Available from: https://doi.org/10.1007/s11044-019-09702-3
Vancouver
Martins FPR, Fleury A de T, Trigo FC. Motion of a disk in contact with a parametric 2D curve and Painlevé’s paradox [Internet]. Multibody system dynamics. 2018 ; 48 427-450.[citado 2024 out. 05 ] Available from: https://doi.org/10.1007/s11044-019-09702-3
Artigo de periodico
An inference model for combustion diagnostics in an experimental oil furnace (2018)
Fleury, Agenor de Toledo ; Trigo, Flávio Celso ; Pacifico, Antonio Luiz ; Martins, Flavius Portella Ribas
Source: Expert Systems. Unidade: EP
Subjects: COMBUSTÃO, FORNO A ÓLEO, FORNO (MONITORAMENTO), REFINARIAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FLEURY, Agenor de Toledo et al. An inference model for combustion diagnostics in an experimental oil furnace. Expert Systems, v. 35, n. 2, p. 1-18, 2018Tradução . . Disponível em: https://doi.org/10.1111/exsy.12245. Acesso em: 05 out. 2024.
APA
Fleury, A. de T., Trigo, F. C., Pacifico, A. L., & Martins, F. P. R. (2018). An inference model for combustion diagnostics in an experimental oil furnace. Expert Systems, 35( 2), 1-18. doi:10.1111/exsy.12245
NLM
Fleury A de T, Trigo FC, Pacifico AL, Martins FPR. An inference model for combustion diagnostics in an experimental oil furnace [Internet]. Expert Systems. 2018 ; 35( 2): 1-18.[citado 2024 out. 05 ] Available from: https://doi.org/10.1111/exsy.12245
Vancouver
Fleury A de T, Trigo FC, Pacifico AL, Martins FPR. An inference model for combustion diagnostics in an experimental oil furnace [Internet]. Expert Systems. 2018 ; 35( 2): 1-18.[citado 2024 out. 05 ] Available from: https://doi.org/10.1111/exsy.12245
Artigo de periodico
Solving the electrical impedance tomography inverse problem for logarithm conductivity numerical sensitivity (2018)
Pellegrini, Sérgio de Paula; Trigo, Flávio Celso ; González Lima, Raúl
Source: International Journal for Computation and Mathematics in Electrical and Electronic Engineering. Unidade: EP
Subjects: PROBLEMAS INVERSOS, TOMOGRAFIA, IMPEDÂNCIA ELÉTRICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PELLEGRINI, Sérgio de Paula e TRIGO, Flávio Celso e GONZÁLEZ LIMA, Raúl. Solving the electrical impedance tomography inverse problem for logarithm conductivity numerical sensitivity. International Journal for Computation and Mathematics in Electrical and Electronic Engineering, v. 37, n. 2, p. 681-690, 2018Tradução . . Disponível em: https://doi.org/10.1108/COMPEL-11-2016-0501. Acesso em: 05 out. 2024.
APA
Pellegrini, S. de P., Trigo, F. C., & González Lima, R. (2018). Solving the electrical impedance tomography inverse problem for logarithm conductivity numerical sensitivity. International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 37( 2), 681-690. doi:10.1108/COMPEL-11-2016-0501
NLM
Pellegrini S de P, Trigo FC, González Lima R. Solving the electrical impedance tomography inverse problem for logarithm conductivity numerical sensitivity [Internet]. International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 2018 ; 37( 2): 681-690.[citado 2024 out. 05 ] Available from: https://doi.org/10.1108/COMPEL-11-2016-0501
Vancouver
Pellegrini S de P, Trigo FC, González Lima R. Solving the electrical impedance tomography inverse problem for logarithm conductivity numerical sensitivity [Internet]. International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 2018 ; 37( 2): 681-690.[citado 2024 out. 05 ] Available from: https://doi.org/10.1108/COMPEL-11-2016-0501
Trabalho de evento
Apparatus design for an independent multiplase flow rate meter (2017)
Pellegrini, Sérgio de Paula ; Yamaguchi, Alan Junji; Trigo, Flávio Celso ; Baliño, Jorge Luis ; Campos, Sthener Rodrigues Vieira
Conference titles: Journeys in Multiphase Flows - JEM. Unidade: EP
Subjects: ESCOAMENTO MULTIFÁSICO, IMPEDÂNCIA ELÉTRICA, TOMOGRAFIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PELLEGRINI, Sérgio de Paula et al. Apparatus design for an independent multiplase flow rate meter. 2017, Anais.. Sao Paulo, SP: ABCM, 2017. Disponível em: http://eventos.abcm.org.br/jem2017/content/uploads/2017/03/JEM-2017-0005.pdf. Acesso em: 05 out. 2024.
APA
Pellegrini, S. de P., Yamaguchi, A. J., Trigo, F. C., Baliño, J. L., & Campos, S. R. V. (2017). Apparatus design for an independent multiplase flow rate meter. In . Sao Paulo, SP: ABCM. Recuperado de http://eventos.abcm.org.br/jem2017/content/uploads/2017/03/JEM-2017-0005.pdf
NLM
Pellegrini S de P, Yamaguchi AJ, Trigo FC, Baliño JL, Campos SRV. Apparatus design for an independent multiplase flow rate meter [Internet]. 2017 ;[citado 2024 out. 05 ] Available from: http://eventos.abcm.org.br/jem2017/content/uploads/2017/03/JEM-2017-0005.pdf
Vancouver
Pellegrini S de P, Yamaguchi AJ, Trigo FC, Baliño JL, Campos SRV. Apparatus design for an independent multiplase flow rate meter [Internet]. 2017 ;[citado 2024 out. 05 ] Available from: http://eventos.abcm.org.br/jem2017/content/uploads/2017/03/JEM-2017-0005.pdf
Trabalho de evento
Modelling and simulation of the rolling Dynamics of a Tractor-Trailer Truck Vehicle (2017)
Sampaio, Ricardo; Trigo, Flávio Celso
Source: DINAME 2017: proceedings. Conference titles: International Symposium on Dynamic Problems of Mechanics - DINAME. Unidades: EP, FFCLRP
Subjects: SISTEMAS DINÂMICOS, SIMULAÇÃO DE SISTEMAS, REBOQUE, ROLAMENTOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SAMPAIO, Ricardo e TRIGO, Flávio Celso. Modelling and simulation of the rolling Dynamics of a Tractor-Trailer Truck Vehicle. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/7eb2f4d2-0ea8-40f2-8fd9-88e23df012e0/Trigo-2017-Modelling%20and%20simulation%20of.pdf. Acesso em: 05 out. 2024.
APA
Sampaio, R., & Trigo, F. C. (2017). Modelling and simulation of the rolling Dynamics of a Tractor-Trailer Truck Vehicle. In DINAME 2017: proceedings. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/7eb2f4d2-0ea8-40f2-8fd9-88e23df012e0/Trigo-2017-Modelling%20and%20simulation%20of.pdf
NLM
Sampaio R, Trigo FC. Modelling and simulation of the rolling Dynamics of a Tractor-Trailer Truck Vehicle [Internet]. DINAME 2017: proceedings. 2017 ;[citado 2024 out. 05 ] Available from: https://repositorio.usp.br/directbitstream/7eb2f4d2-0ea8-40f2-8fd9-88e23df012e0/Trigo-2017-Modelling%20and%20simulation%20of.pdf
Vancouver
Sampaio R, Trigo FC. Modelling and simulation of the rolling Dynamics of a Tractor-Trailer Truck Vehicle [Internet]. DINAME 2017: proceedings. 2017 ;[citado 2024 out. 05 ] Available from: https://repositorio.usp.br/directbitstream/7eb2f4d2-0ea8-40f2-8fd9-88e23df012e0/Trigo-2017-Modelling%20and%20simulation%20of.pdf
Artigo de periodico
Identification of the state-space dynamics of oil flames through computer vision and modal techniques (2015)
Silva, R. P; Fleury, Agenor de Toledo ; Martins, Flavius Portella Ribas ; Ponge-Ferreira, Walter Jorge Augusto; Trigo, Flávio Celso
Source: Expert Systems with Applications. Unidade: EP
Subjects: PROCESSAMENTO DE IMAGENS, INTELIGÊNCIA ARTIFICIAL, ANALISE MODAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, R. P et al. Identification of the state-space dynamics of oil flames through computer vision and modal techniques. Expert Systems with Applications, v. 42, n. 5, p. 2421-2428, 2015Tradução . . Disponível em: https://doi.org/10.1016/j.eswa.2014.10.030. Acesso em: 05 out. 2024.
APA
Silva, R. P., Fleury, A. de T., Martins, F. P. R., Ponge-Ferreira, W. J. A., & Trigo, F. C. (2015). Identification of the state-space dynamics of oil flames through computer vision and modal techniques. Expert Systems with Applications, 42( 5), 2421-2428. doi:10.1016/j.eswa.2014.10.030
NLM
Silva RP, Fleury A de T, Martins FPR, Ponge-Ferreira WJA, Trigo FC. Identification of the state-space dynamics of oil flames through computer vision and modal techniques [Internet]. Expert Systems with Applications. 2015 ; 42( 5): 2421-2428.[citado 2024 out. 05 ] Available from: https://doi.org/10.1016/j.eswa.2014.10.030
Vancouver
Silva RP, Fleury A de T, Martins FPR, Ponge-Ferreira WJA, Trigo FC. Identification of the state-space dynamics of oil flames through computer vision and modal techniques [Internet]. Expert Systems with Applications. 2015 ; 42( 5): 2421-2428.[citado 2024 out. 05 ] Available from: https://doi.org/10.1016/j.eswa.2014.10.030
Artigo de periodico
Quantitative evaluation of parameters used in wear testing simulators of total hip arthroplasty components (2014)
Oliveira, André Luís Lima de; Trigo, Flávio Celso ; Martins, Flavius Portella Ribas
Source: Wear. Unidade: EP
Subjects: FADIGA DE CONTATO, PRÓTESE ARTICULAR, RESISTÊNCIA DOS MATERIAIS, TRIBOLOGIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, André Luís Lima de e TRIGO, Flávio Celso e MARTINS, Flavius Portella Ribas. Quantitative evaluation of parameters used in wear testing simulators of total hip arthroplasty components. Wear, v. 313, n. 1-2, p. 1-10, 2014Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2014.02.003. Acesso em: 05 out. 2024.
APA
Oliveira, A. L. L. de, Trigo, F. C., & Martins, F. P. R. (2014). Quantitative evaluation of parameters used in wear testing simulators of total hip arthroplasty components. Wear, 313( 1-2), 1-10. doi:10.1016/j.wear.2014.02.003
NLM
Oliveira ALL de, Trigo FC, Martins FPR. Quantitative evaluation of parameters used in wear testing simulators of total hip arthroplasty components [Internet]. Wear. 2014 ; 313( 1-2): 1-10.[citado 2024 out. 05 ] Available from: https://doi.org/10.1016/j.wear.2014.02.003
Vancouver
Oliveira ALL de, Trigo FC, Martins FPR. Quantitative evaluation of parameters used in wear testing simulators of total hip arthroplasty components [Internet]. Wear. 2014 ; 313( 1-2): 1-10.[citado 2024 out. 05 ] Available from: https://doi.org/10.1016/j.wear.2014.02.003
Parte de monografia/livro
Application of optical techniques to materials characterization and modeling (2014)
Trigo, Flávio Celso ; Sanchez, O; Martins, Flavius Portella Ribas ; Batalha, Gilmar Ferreira (Editor)
Source: Comprehensive materials processing. vol. 2 : Materials modeling and characterization. Unidade: EP
Subjects: ANÁLISE COLORIMÉTRICA, COR, ESTATÍSTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TRIGO, Flávio Celso e SANCHEZ, O e MARTINS, Flavius Portella Ribas. Application of optical techniques to materials characterization and modeling. Comprehensive materials processing. vol. 2 : Materials modeling and characterization. Tradução . Amsterdam, Netherlands: Elsevier, 2014. . Disponível em: https://repositorio.usp.br/directbitstream/2e2d4aaa-df3d-40c9-8442-cdfd057618e0/Trigo-2014-Application%20of%20Optical%20Techniques%20to%20Materials.pdf. Acesso em: 05 out. 2024.
APA
Trigo, F. C., Sanchez, O., & Martins, F. P. R. (2014). Application of optical techniques to materials characterization and modeling. In Comprehensive materials processing. vol. 2 : Materials modeling and characterization. Amsterdam, Netherlands: Elsevier. Recuperado de https://repositorio.usp.br/directbitstream/2e2d4aaa-df3d-40c9-8442-cdfd057618e0/Trigo-2014-Application%20of%20Optical%20Techniques%20to%20Materials.pdf
NLM
Trigo FC, Sanchez O, Martins FPR. Application of optical techniques to materials characterization and modeling [Internet]. In: Comprehensive materials processing. vol. 2 : Materials modeling and characterization. Amsterdam, Netherlands: Elsevier; 2014. [citado 2024 out. 05 ] Available from: https://repositorio.usp.br/directbitstream/2e2d4aaa-df3d-40c9-8442-cdfd057618e0/Trigo-2014-Application%20of%20Optical%20Techniques%20to%20Materials.pdf
Vancouver
Trigo FC, Sanchez O, Martins FPR. Application of optical techniques to materials characterization and modeling [Internet]. In: Comprehensive materials processing. vol. 2 : Materials modeling and characterization. Amsterdam, Netherlands: Elsevier; 2014. [citado 2024 out. 05 ] Available from: https://repositorio.usp.br/directbitstream/2e2d4aaa-df3d-40c9-8442-cdfd057618e0/Trigo-2014-Application%20of%20Optical%20Techniques%20to%20Materials.pdf
Artigo de periodico
A finite element method approach to compare the wear of acetabular cups in polyethylene according to their lateral tilt in relation tho coronal plane (2013)
Queiroz, R. Dantas; Oliveira, A L de; Trigo, Flávio Celso ; Lopes, J A
Source: Wear. Unidade: EP
Subjects: MÉTODO DOS ELEMENTOS FINITOS, RESISTÊNCIA DOS MATERIAIS, TRIBOLOGIA, POLÍMEROS (MATERIAIS)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
QUEIROZ, R. Dantas et al. A finite element method approach to compare the wear of acetabular cups in polyethylene according to their lateral tilt in relation tho coronal plane. Wear, v. 298-299, p. 8-13, 2013Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2012.12.032. Acesso em: 05 out. 2024.
APA
Queiroz, R. D., Oliveira, A. L. de, Trigo, F. C., & Lopes, J. A. (2013). A finite element method approach to compare the wear of acetabular cups in polyethylene according to their lateral tilt in relation tho coronal plane. Wear, 298-299, 8-13. doi:10.1016/j.wear.2012.12.032
NLM
Queiroz RD, Oliveira AL de, Trigo FC, Lopes JA. A finite element method approach to compare the wear of acetabular cups in polyethylene according to their lateral tilt in relation tho coronal plane [Internet]. Wear. 2013 ; 298-299 8-13.[citado 2024 out. 05 ] Available from: https://doi.org/10.1016/j.wear.2012.12.032
Vancouver
Queiroz RD, Oliveira AL de, Trigo FC, Lopes JA. A finite element method approach to compare the wear of acetabular cups in polyethylene according to their lateral tilt in relation tho coronal plane [Internet]. Wear. 2013 ; 298-299 8-13.[citado 2024 out. 05 ] Available from: https://doi.org/10.1016/j.wear.2012.12.032
Trabalho de evento
Comparative study of vorticity fields generated by cylindrical bodies undergoing forced rolling motion (2013)
Martins, Flavius Portella Ribas ; Trigo, Flávio Celso ; Fleury, Agenor de Toledo ; Ponge-Ferreira, Walter Jorge Augusto
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EP
Subjects: VÓRTICES DOS FLUÍDOS, PROCESSAMENTO DE IMAGENS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTINS, Flavius Portella Ribas et al. Comparative study of vorticity fields generated by cylindrical bodies undergoing forced rolling motion. 2013, Anais.. Rio De Janeiro: ABCM, 2013. Disponível em: https://abcm.org.br/app/webroot/anais/cobem/2013/_PDF/133.pdf. Acesso em: 05 out. 2024.
APA
Martins, F. P. R., Trigo, F. C., Fleury, A. de T., & Ponge-Ferreira, W. J. A. (2013). Comparative study of vorticity fields generated by cylindrical bodies undergoing forced rolling motion. In Anais. Rio De Janeiro: ABCM. Recuperado de https://abcm.org.br/app/webroot/anais/cobem/2013/_PDF/133.pdf
NLM
Martins FPR, Trigo FC, Fleury A de T, Ponge-Ferreira WJA. Comparative study of vorticity fields generated by cylindrical bodies undergoing forced rolling motion [Internet]. Anais. 2013 ;[citado 2024 out. 05 ] Available from: https://abcm.org.br/app/webroot/anais/cobem/2013/_PDF/133.pdf
Vancouver
Martins FPR, Trigo FC, Fleury A de T, Ponge-Ferreira WJA. Comparative study of vorticity fields generated by cylindrical bodies undergoing forced rolling motion [Internet]. Anais. 2013 ;[citado 2024 out. 05 ] Available from: https://abcm.org.br/app/webroot/anais/cobem/2013/_PDF/133.pdf
Artigo de periodico
Development of a protocol for the performance evaluation of wear machines used in tests of joints prostheses (2013)
Oliveira, A. L. L. de; Trigo, Flávio Celso ; Carvalho, R T
Source: Mechanism and Machine Theory. Unidade: EP
Subjects: RESISTÊNCIA DOS MATERIAIS, PRÓTESES ORTOPÉDICAS (RESISTÊNCIA)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, A. L. L. de e TRIGO, Flávio Celso e CARVALHO, R T. Development of a protocol for the performance evaluation of wear machines used in tests of joints prostheses. Mechanism and Machine Theory, v. 61, p. 59-67, 2013Tradução . . Disponível em: http://www.sciencedirect.com/science/article/pii/S0094114X1200211X#. Acesso em: 05 out. 2024.
APA
Oliveira, A. L. L. de, Trigo, F. C., & Carvalho, R. T. (2013). Development of a protocol for the performance evaluation of wear machines used in tests of joints prostheses. Mechanism and Machine Theory, 61, 59-67. doi:10.1016/j.mechmachtheory.2010.07.002
NLM
Oliveira ALL de, Trigo FC, Carvalho RT. Development of a protocol for the performance evaluation of wear machines used in tests of joints prostheses [Internet]. Mechanism and Machine Theory. 2013 ; 61 59-67.[citado 2024 out. 05 ] Available from: http://www.sciencedirect.com/science/article/pii/S0094114X1200211X#
Vancouver
Oliveira ALL de, Trigo FC, Carvalho RT. Development of a protocol for the performance evaluation of wear machines used in tests of joints prostheses [Internet]. Mechanism and Machine Theory. 2013 ; 61 59-67.[citado 2024 out. 05 ] Available from: http://www.sciencedirect.com/science/article/pii/S0094114X1200211X#
Artigo de periodico
On the Euler and Lagrange's points of view in rigid body mechanics: An integrated approach (2011)
Martins, Flavius Portella Ribas ; Trigo, Flávio Celso ; Fleury, Agenor de Toledo
Source: International Journal of Mechanical Engineering Education. Unidade: EP
Subjects: MECÂNICA DOS FLUÍDOS, EQUAÇÕES DE EULER, AERODINÂMICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTINS, Flavius Portella Ribas e TRIGO, Flávio Celso e FLEURY, Agenor de Toledo. On the Euler and Lagrange's points of view in rigid body mechanics: An integrated approach. International Journal of Mechanical Engineering Education, v. 39, n. ja, p. 68-77, 2011Tradução . . Disponível em: https://doi.org/10.7227/IJMEE.39.1.6. Acesso em: 05 out. 2024.
APA
Martins, F. P. R., Trigo, F. C., & Fleury, A. de T. (2011). On the Euler and Lagrange's points of view in rigid body mechanics: An integrated approach. International Journal of Mechanical Engineering Education, 39( ja), 68-77. doi:10.7227/IJMEE.39.1.6
NLM
Martins FPR, Trigo FC, Fleury A de T. On the Euler and Lagrange's points of view in rigid body mechanics: An integrated approach [Internet]. International Journal of Mechanical Engineering Education. 2011 ; 39( ja): 68-77.[citado 2024 out. 05 ] Available from: https://doi.org/10.7227/IJMEE.39.1.6
Vancouver
Martins FPR, Trigo FC, Fleury A de T. On the Euler and Lagrange's points of view in rigid body mechanics: An integrated approach [Internet]. International Journal of Mechanical Engineering Education. 2011 ; 39( ja): 68-77.[citado 2024 out. 05 ] Available from: https://doi.org/10.7227/IJMEE.39.1.6
Trabalho de evento-resumo
Análise dinâmica de uma cadeira de rodas convencional ocupada por um ser humano na transposição de obstáculos (2009)
Tomotani, João Vitor; Machado, Rafael Andrade; Biseli, Mateus Costa; Trigo, Flávio Celso (Orientador)
Source: Resumos. Conference titles: Simpósio Internacional de Iniciação Científica da Universidade de São Paulo - SIICUSP 2009. Unidade: EP
Subjects: DEFICIENTE FÍSICO, CADEIRA DE RODAS, LOCOMOÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TOMOTANI, João Vitor e MACHADO, Rafael Andrade e BISELI, Mateus Costa. Análise dinâmica de uma cadeira de rodas convencional ocupada por um ser humano na transposição de obstáculos. 2009, Anais.. São Paulo: USP, 2009. Disponível em: https://repositorio.usp.br/directbitstream/9d944a03-2228-499b-b065-92ea521b60be/Trigo-2009-An%C3%A1lise%20din%C3%A2mica%20de%20uma%20cadeira%20de%20rodas%20convencional%20ocupada%20por.pdf. Acesso em: 05 out. 2024.
APA
Tomotani, J. V., Machado, R. A., & Biseli, M. C. (2009). Análise dinâmica de uma cadeira de rodas convencional ocupada por um ser humano na transposição de obstáculos. In Resumos. São Paulo: USP. Recuperado de https://repositorio.usp.br/directbitstream/9d944a03-2228-499b-b065-92ea521b60be/Trigo-2009-An%C3%A1lise%20din%C3%A2mica%20de%20uma%20cadeira%20de%20rodas%20convencional%20ocupada%20por.pdf
NLM
Tomotani JV, Machado RA, Biseli MC. Análise dinâmica de uma cadeira de rodas convencional ocupada por um ser humano na transposição de obstáculos [Internet]. Resumos. 2009 ;[citado 2024 out. 05 ] Available from: https://repositorio.usp.br/directbitstream/9d944a03-2228-499b-b065-92ea521b60be/Trigo-2009-An%C3%A1lise%20din%C3%A2mica%20de%20uma%20cadeira%20de%20rodas%20convencional%20ocupada%20por.pdf
Vancouver
Tomotani JV, Machado RA, Biseli MC. Análise dinâmica de uma cadeira de rodas convencional ocupada por um ser humano na transposição de obstáculos [Internet]. Resumos. 2009 ;[citado 2024 out. 05 ] Available from: https://repositorio.usp.br/directbitstream/9d944a03-2228-499b-b065-92ea521b60be/Trigo-2009-An%C3%A1lise%20din%C3%A2mica%20de%20uma%20cadeira%20de%20rodas%20convencional%20ocupada%20por.pdf
Trabalho de evento-resumo
Estudo da viabilidade de um mecanismo ativado por força humana que proporcione a uma cadeira de rodas a capacidade de transpor guias (2009)
Pedro, Fernando Martins; Farias, Filipe Filgueira; Souza Neto, José Moreira de; Trigo, Flávio Celso
Source: Resumos. Conference titles: Simpósio Internacional de Iniciação Científica da Universidade de São Paulo - SIICUSP 2009. Unidade: EP
Subjects: DEFICIENTE FÍSICO, MECANISMOS COMPORTAMENTAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEDRO, Fernando Martins et al. Estudo da viabilidade de um mecanismo ativado por força humana que proporcione a uma cadeira de rodas a capacidade de transpor guias. 2009, Anais.. São Paulo: USP, 2009. Disponível em: https://repositorio.usp.br/directbitstream/7a55bde1-53d1-4e71-9bd1-ea4bfe28a595/Trigo-2009-Estudo%20da%20viabilidade%20de%20um%20mecanismo%20ativado%20por%20for%C3%A7a%20humana%20que%20proporcione%20a%20uma%20cadeira%20de%20rodas%20a%20capacidade%20de%20transpor%20guias.pdf. Acesso em: 05 out. 2024.
APA
Pedro, F. M., Farias, F. F., Souza Neto, J. M. de, & Trigo, F. C. (2009). Estudo da viabilidade de um mecanismo ativado por força humana que proporcione a uma cadeira de rodas a capacidade de transpor guias. In Resumos. São Paulo: USP. Recuperado de https://repositorio.usp.br/directbitstream/7a55bde1-53d1-4e71-9bd1-ea4bfe28a595/Trigo-2009-Estudo%20da%20viabilidade%20de%20um%20mecanismo%20ativado%20por%20for%C3%A7a%20humana%20que%20proporcione%20a%20uma%20cadeira%20de%20rodas%20a%20capacidade%20de%20transpor%20guias.pdf
NLM
Pedro FM, Farias FF, Souza Neto JM de, Trigo FC. Estudo da viabilidade de um mecanismo ativado por força humana que proporcione a uma cadeira de rodas a capacidade de transpor guias [Internet]. Resumos. 2009 ;[citado 2024 out. 05 ] Available from: https://repositorio.usp.br/directbitstream/7a55bde1-53d1-4e71-9bd1-ea4bfe28a595/Trigo-2009-Estudo%20da%20viabilidade%20de%20um%20mecanismo%20ativado%20por%20for%C3%A7a%20humana%20que%20proporcione%20a%20uma%20cadeira%20de%20rodas%20a%20capacidade%20de%20transpor%20guias.pdf
Vancouver
Pedro FM, Farias FF, Souza Neto JM de, Trigo FC. Estudo da viabilidade de um mecanismo ativado por força humana que proporcione a uma cadeira de rodas a capacidade de transpor guias [Internet]. Resumos. 2009 ;[citado 2024 out. 05 ] Available from: https://repositorio.usp.br/directbitstream/7a55bde1-53d1-4e71-9bd1-ea4bfe28a595/Trigo-2009-Estudo%20da%20viabilidade%20de%20um%20mecanismo%20ativado%20por%20for%C3%A7a%20humana%20que%20proporcione%20a%20uma%20cadeira%20de%20rodas%20a%20capacidade%20de%20transpor%20guias.pdf
Dissertação (Mestrado)
Filtro estendido de Kalman aplicado à tomografia por impedância elétrica (2001)
Trigo, Flávio Celso ; González Lima, Raúl (Orientador)
Unidade: EP
Subjects: FILTROS ELÉTRICOS, ESTIMAÇÃO PARAMÉTRICA, TOMOGRAFIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TRIGO, Flávio Celso. Filtro estendido de Kalman aplicado à tomografia por impedância elétrica. 2001. Dissertação (Mestrado) – Universidade de São Paulo, São Paulo, 2001. Disponível em: http://www.teses.usp.br/teses/disponiveis/3/3132/tde-23112001-151232/. Acesso em: 05 out. 2024.
APA
Trigo, F. C. (2001). Filtro estendido de Kalman aplicado à tomografia por impedância elétrica (Dissertação (Mestrado). Universidade de São Paulo, São Paulo. Recuperado de http://www.teses.usp.br/teses/disponiveis/3/3132/tde-23112001-151232/
NLM
Trigo FC. Filtro estendido de Kalman aplicado à tomografia por impedância elétrica [Internet]. 2001 ;[citado 2024 out. 05 ] Available from: http://www.teses.usp.br/teses/disponiveis/3/3132/tde-23112001-151232/
Vancouver
Trigo FC. Filtro estendido de Kalman aplicado à tomografia por impedância elétrica [Internet]. 2001 ;[citado 2024 out. 05 ] Available from: http://www.teses.usp.br/teses/disponiveis/3/3132/tde-23112001-151232/

USP Schools

ReP

Filtros

Authors

USP affiliated authors

Date published

Subjects

Source title

Funding Agencies

Indexado em